- fixed (now really) for 2.6 modprobe.conf.

- clean up, modprobing without a temporary file.
- alsaconf will set up only the minimum aliases/options.
- cosmetic message changes.

alsaconf/alsaconf.in

@@ -93,15 +93,15 @@ while true ; do
     -L|--log)
 	do_logging=1; rm -f $LOGFILE; shift;;
     -p|--probe)
-	legacy_probe_card=$2; shift 2;;
+	legacy_probe_card="$2"; shift 2;;
     -P|--listprobe)
 	echo "$LEGACY_CARDS"; exit 0;;
     -u|--uid)
-	alsa_uid=$2; shift 2;;
+	alsa_uid="$2"; shift 2;;
     -g|--gid)
-	alsa_gid=$2; shift 2;;
+	alsa_gid="$2"; shift 2;;
     -d|--devmode)
-	alsa_mode=$2; shift 2;;
+	alsa_mode="$2"; shift 2;;
     -r|--strict)
 	alsa_uid=0; alsa_gid=17; alsa_mode=0660; shift;;
     --) shift ; break ;;
@@ -134,7 +134,18 @@ if modinfo -p snd | grep -q device_mode ; then
   fi
 fi
 
-if [ "$distribution" = "debian" ]; then
+case `uname -r` in
+2.6.*)
+  kernel="new"
+  ;;
+*)
+  kernel="old"
+  ;;
+esac
+
+if [ "$kernel" = "new" -a -f /etc/modprobe.conf ]; then
+  cfgfile="/etc/modprobe.conf"
+elif [ "$distribution" = "debian" ]; then
   cfgfile="/etc/alsa/modutils/0.9"
 elif [ -e /etc/modules.conf ]; then
   cfgfile="/etc/modules.conf"
@@ -231,6 +242,7 @@ remove_ac_block() {
 #
 mixer() {
   amixer set "$1" "$2" unmute >/dev/null 2>&1
+  amixer set "$1" unmute >/dev/null 2>&1
 }
 
 set_mixers() {
@@ -238,18 +250,23 @@ set_mixers() {
     mixer PCM 90%
     mixer Synth 90%
     mixer CD 90%
+    # mute mic
+    amixer set Mic 0% mute >/dev/null 2>&1
     # ESS 1969 chipset has 2 PCM channels
     mixer PCM,1 90%
     # Trident/YMFPCI/emu10k1
     mixer Wave 100%
     mixer Music 100%
+    mixer AC97 100%
     # CS4237B chipset:
     mixer 'Master Digital' 75%
     # Envy24 chips with analog outs
+    mixer DAC 90%
     mixer DAC,0 90%
     mixer DAC,1 90%
     # some notebooks use headphone instead of master
     mixer Headphone 75%
+    mixer Playback 100%
 }
 
 
@@ -494,11 +511,6 @@ ac_config_card () {
 
     CARD_DRIVER=snd-$1
     CARD_OPTS="${*:2}"
-    if [ -z "$CARD_OPTS" ]; then
-	CARD_OPTS="${mpfx}index=0"
-    else
-	CARD_OPTS="${mpfx}index=0 $CARD_OPTS"
-    fi
 
     # Configuration done
     $DIALOG --yesno "
@@ -528,19 +540,30 @@ Do you want to modify ${cfgfile}?" 8 50 || acex 0
 	remove_ac_block < $cfgfile | remove_y2_block | uniq > $TMP
     fi
     echo "$ACB
-# --- ALSACONF verion $version ---
-alias char-major-116 snd
-alias snd-card-0 $CARD_DRIVER
+# --- ALSACONF verion $version ---" >> $TMP
+    if [ -z "$have_alias" -a "$kernel" = "new" ]; then
+	if grep -q char-major-116 /lib/modules/`uname -r`/modules.alias; then
+	    have_alias="yes"
+	fi
+    fi
+    if [ -z "$have_alias" ]; then
+echo "alias char-major-116 snd
 alias char-major-14 $SOUND_CORE
-alias sound-slot-0 snd-card-0
 alias sound-service-0-0 snd-mixer-oss
 alias sound-service-0-1 snd-seq-oss
 alias sound-service-0-3 snd-pcm-oss
 alias sound-service-0-8 snd-seq-oss
-alias sound-service-0-12 snd-pcm-oss
-options snd ${mpfx}major=116 ${mpfx}cards_limit=1$alsa_device_opts
-options $CARD_DRIVER $CARD_OPTS
-$ACE
+alias sound-service-0-12 snd-pcm-oss" >> $TMP
+    fi
+    if [ -n "$alsa_device_opts" ]; then
+	echo "options snd $alsa_device_opts" >> $TMP
+    fi
+echo "alias snd-card-0 $CARD_DRIVER
+alias sound-slot-0 $CARD_DRIVER" >> $TMP
+    if [ -n "$CARD_OPTS" ]; then
+	echo "options $CARD_DRIVER $CARD_OPTS" >> $TMP
+    fi
+echo "$ACE
 " >> $TMP
 
     if cp -f $cfgfile $cfgfile.old; then
@@ -603,7 +626,7 @@ If you have a big amplifier, lower your volumes or say no.
 ===============================================================================
 
  Now ALSA is ready to use.
- For adjustment of volumes, please use alsamixer or gamix.
+ For adjustment of volumes, use your favorite mixer.
 
  Have a lot of fun!
 
@@ -638,15 +661,9 @@ check_irq_avail () {
 # check playback
 # return 0 - OK, 1 - NG, 2 - not working (irq/dma problem)
 ac_try_load () {
-    echo "alias char-major-116 snd
-alias snd-card-0 snd-card-$1
-options snd ${mpfx}major=116 ${mpfx}cards_limit=1
-options snd-$1 ${*:2}
-" > $TMP
     test $do_logging = 1 && echo "$1 ${*:2}" >> $LOGFILE
-    /sbin/modprobe -C $TMP snd-$1 >/dev/null 2>&1
+    /sbin/modprobe snd-$1 ${*:2} >/dev/null 2>&1
     $lsmod | grep -E '(snd-|snd_)' $1 >/dev/null 2>&1 || return 1
-    /sbin/modprobe -C $TMP snd-ioctl32 >/dev/null 2>&1
 
     # mute mixers
     amixer set Master 0% mute >/dev/null 2>&1
@@ -662,8 +679,7 @@ options snd-$1 ${*:2}
     kill -9 $pp > /dev/null 2>&1
     st=$?
     ac_cardname=`head -n 1 /proc/asound/cards | sed -e 's/^[0-9].* - \(.*\)$/\1/'`
-    /sbin/modprobe -C $TMP -r snd-ioctl32 >/dev/null 2>&1
-    /sbin/modprobe -C $TMP -r snd-$1 >/dev/null 2>&1
+    /sbin/modprobe -r snd-$1 >/dev/null 2>&1
     if [ $st = 0 ]; then
 	# irq problem?
 	test $do_logging = 1 && echo "no playback return" >> $LOGFILE
@@ -679,15 +695,9 @@ options snd-$1 ${*:2}
 # return 0 - OK, 1 - NG, 2 - not working (irq/dma problem)
 # ac_try_capture card duplex opts
 ac_try_capture () {
-    echo "alias char-major-116 snd
-alias snd-card-0 snd-$1
-options snd ${mpfx}major=116 ${mpfx}cards_limit=1
-options snd-$1 ${*:3}
-" > $TMP
     test $do_logging = 1 && echo "$1 ${*:2}" >> $LOGFILE
-    /sbin/modprobe -C $TMP snd-$1 >/dev/null 2>&1
+    /sbin/modprobe snd-$1 ${*:3} >/dev/null 2>&1
     $lsmod | grep -E '(snd-|snd_)' $1 >/dev/null 2>&1 || return 1
-    /sbin/modprobe -C $TMP snd-ioctl32 >/dev/null 2>&1
 
     # mute mixers
     amixer set Master 0% mute >/dev/null 2>&1
@@ -710,8 +720,7 @@ options snd-$1 ${*:3}
     st=$?
     # kill playback process if any
     test $play_pid != 0 && kill -9 $play_pid
-    /sbin/modprobe -C $TMP -r snd-ioctl32 >/dev/null 2>&1
-    /sbin/modprobe -C $TMP -r snd-$1 >/dev/null 2>&1
+    /sbin/modprobe -r snd-$1 >/dev/null 2>&1
     if [ $st = 0 ]; then
 	test $do_logging = 1 && echo "capture no return" >> $LOGFILE
 	return 2