The recent commit c867aa8a84 ("alsamixer: use background color
instead of COLOR_BLACK") changed the behavior of alsamixer to take the
system default background color instead of black. This caused
problems on the terminal setups that have bright background colors,
e.g. yellow is very hard to read.
It could be "fixed" by setting up the color configurations in
~/.config/alsamixer.rc, but this needs to change the all colors in
every element, which is pretty cumbersome. Instead, this patch
extends the config set command to allow user to specify the default
background color. A user like me can create their own
~/.config/alsamixer.rc file containing the line
set background black
and the old good black background is back again.
Note that, for achieving the above, we also had to shuffle the
function call order, to parse the config at first, then initialize
curses. This shouldn't matter for other behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let's check the availiabiy via has_mouse(). Otherwise the program
aborts unexpectedly just focusing on my rxvt terminal :-(
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The value 'auto' was not checked which resulted in using
SYNC_TYPE_NONE instead of SYNC_TYPE_AUTO.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
If snd-aloop device is on playback side, the required sync mode is
PLAYSHIFT. That means Loopback ctl elem "PCM Rate Shift 100000" of the
corresponding capture side of the Loopback pipe must be controlled (by
a reciprocal).
ASCII name of the playback rate shift ctl elem is specified with newly
added option -x/--prateshift, e.g.:
-P hw:Loopback,0 -S playshift \
-x iface=PCM,name='PCM Rate Shift 100000',device=1
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When debugging what ctl elem was found and opened (if any) a debug log is
helpful.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added -T / --timestamp option (with parameter "realtime", "monotonic" or "raw") which prints
a timestamp before each received message when using the --dump mode.
Fixes: https://github.com/alsa-project/alsa-utils/pull/108
Signed-off-by: Folkert van Heusden <mail@vanheusden.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The return value from abs() for the most negative integer is
undefined. Cap it properly for the 32bit sample handling.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The handling of 16bit samples in the peak calculations has a bug when
a sample with 0x8000 is passed. As abs() treats 32bit int, it returns
0x8000. And yet the code stores back into 16bit value again.
To fix that overflow, use 32bit value (i.e. val instead of sval) for
the further calculations.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In Linux 5.14, a new feedback mechanism for USB Audio
Gadget is introduced (commit e89bb428), along with a
new control element "Capture Pitch 1000000". This patch
adds support for this feature. Note that this property
seems to be the reverse of PCM Rate Shift, so we have
to take reciprocal of pitch.
Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added sections FILES and CONFIGURATION.
Removed section BUGS, because the described terminal issues have been fixed.
Signed-off-by: braph <braph93@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
An object can be declared within a class definition as follows:
Class.Pipeline.volume-playback {
Object.Widget.pga.0 {
ramp_step_ms 250
}
}
While instantiating the volume-pipeline class, the pga object
could be modified as follows:
Object.Pipeline.volume-playback.0 {
Object.Widget.pga.0 {
format "s24le"
}
}
When building the pga.0 object in the class definition, merge
the attributes declared in the volume-playback.0 object to create
a new config as follows to make sure that all attributes are
set for the pga object.
Object.Widget.pga.0 {
ramp_step_ms 250
format "s24le"
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Do not create TLV config if it exists already. Just
set the string value with the name name.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Allow support for adding data section for kcontrols.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix typo in config variable name. Should be n2 instead of n.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Skip creating section when it exists already.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Nothing to do for top-level objects with no parent.
Also, add access to the bytes control template.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Switch source and sink widgets in the DAPM route.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Some objects just need tobe processed to add their attributes
to the private data section of their parent objects.
An example of this would be the pdm_config objects for
DMIC DAI's. Each pdm_config object's attributes need
to be added as separate arrays in the DAI object's
private data.
Modify the signature of tplg_add_object_data() to pass
the array_name parameter when multiple objects of the
same type in the same parent are processed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add the function to compute the value for the
"size" automatic attribute in the buffer objects.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Classes definitions in Topology2.0 can have attributes
qualified with the "automatic" constraint. Values for
these attributes will be calculated by the compiler.
This patch provides a generic method for defining automatic
attributes computation logic for different classes.
To update automatic attributes for a class, add an item
in object_build_map with auto_attr_updater defined, and then
add updating logic in the custom auto_attr_updater function.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
When we reverted 0c5948e ("aplay: try to use 16-bit format to
increase capture quality"), we should also handle the original
problem somehow. This code shows a warning with a hint to
the right parameter.
Fixes: https://github.com/alsa-project/alsa-utils/issues/96
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This option allows to run multiple instances of aseqnet without having
to double check the assigned port number, since each one can get spawned
with a unique name.
Fixes: https://github.com/alsa-project/alsa-utils/pull/95
Signed-off-by: Andrea Piras <andrea.piras.85@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fixes:
| ../../alsa-utils-1.2.5/alsactl/utils.c: In function 'snd_card_clean_cfgdir':
| ../../alsa-utils-1.2.5/alsactl/utils.c:309:19: error: 'PATH_MAX' undeclared (first use in this function)
| 309 | char path[PATH_MAX];
| | ^~~~~~~~
| ../../alsa-utils-1.2.5/alsactl/utils.c:309:19: note: each undeclared identifier is reported only once for each function it appears in
Fixes: https://github.com/alsa-project/alsa-utils/pull/92
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
If load_configuration fails with open_failed == true, load_state will
jump to the out label without config being initialized and pass this
uninitialized config value to snd_config_delete. This commit fixes this
issue by initializing config with NULL and checking if it is non-null
before invoking snd_config_delete.
Fixes: https://github.com/alsa-project/alsa-utils/pull/94
Fixes: f138117 ("alsactl: load_state() - initialize config variable for the open_failed case")
BugLink: https://github.com/alsa-project/alsa-utils/issues/93
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds check to the return pointer from strchr,
because it may be null and cause segment fault, if component
is not properly constructed.
Fixes: https://github.com/alsa-project/alsa-utils/pull/91
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
There may be nested iterations for hw: card names.
Handle this card name in snd_card_iterator_sinit().
BugLink: https://github.com/alsa-project/alsa-lib/issues/142
Fixes: eefc2c6 ("alsactl: use card iterator functions for all card loops")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for processing object instances embedded
within objects and classes. For example:
Object.Control.mixer."0" {
#Channel register and shift for Front Left/Right
Object.Base.channel."fl" {
shift 0
}
Object.Base.channel."fr" {
}
Object.Base.tlv."vtlv_m64s2" {
Object.Base.scale."m64s2" {
mute 1
}
}
Object.Base.ops."ctl" {
info "volsw"
#256 binds the mixer control to volume get/put handlers
get 256
put 256
}
}
and pga class embeds the mixer objects as follows:
Class.Widget."pga" {
...
Object.Control {
mixer."0" {...}
mixer."1" {...}
}
The pre-processor starts with the top-pevel PGA widget object
and processes the mixer objects in the class definition.
This will recursively pre-processes its child objects to add the channels,
tlv and ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
