At present, handlers for control nodes are maintained by one-dimensional
array. This is not necessarily useful to maintain handlers with
associated information.
This commit adds link-list for the maintenance.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Linux kernel supports unique system call; epoll(7). This allows
applications to make associations for descriptor-unique data in a
easy way.
This commit uses epoll(7) instead of poll(2) for this point.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In a mode of 'monitor', when given no argument, all of available control
node is observed for their events. At present, discovering the nodes is
done according to sound card number, instead of listing nodes in
configuration space of alsa-lib.
This commit adds a structure to discover sound cards with a simple
interface.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In a mode of 'monitor', an event loop runs.
This commit applies a small refactoring to splits the loop into a
function for readability.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Setting the format to BAT_PCM_FORMAT_S16_LE in the round trip latency
test initialization is redundant as it is already set by default to
BAT_PCM_FORMAT_S16_LE unless a sample format is specified on the command
line.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are audio devices around that support up to 768kHz playback, allow
testing them by increasing the maximum supported sampling rate.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
aplay tries to check the file size via fstat() at parsing the format
headers and avoids parsing when the size is shorter than the given
size. This works fine for regular files, but when a special file like
pipe is passed, it fails, eventually leading to the fallback mode
wrongly.
A proper fix is to do this sanity check only for a regular file.
Reported-by: Jay Foster <jay@systech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On my 32 bit armhf board arecord exits because of write() returning EFBIG
when the output file size reaches 2147483647 bytes.
To fix this, include generated header file before system header files
so that _FILE_OFFSET_BITS=64 is used properly, as required in documentation
"man feature_test_macros".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are many redundant open codes in speaker-test for performing the
similar things, and especially the tone generator codes are ugly.
Let's clean up a bit. This patch combines all open-codes into a
single common helper with the callback for generating the tone.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hello maintainers,
I would like to suggest you a patch which fixes a typo in the alsa-utils
alsaloop.
Best Regards,
Kirill Marinushkin
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: patch@alsa-project.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This solves the chicken and egg problem on fresh installations whereby
the alsa state file does not yet exist, and alsa-restore unit attempted
to launch without first having a state file.
Signed-off-by: Ikey Doherty <ikey@solus-project.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are number of devices that support up to 384 kHz sampling rate and
some devices up to 768 kHz sampling rate. This patch increases sanity
check limit to 768k in order to support testing of such hardware.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensures soundcard is ready before restoring state.
sound.target added to systemd in v18:
https://cgit.freedesktop.org/systemd/systemd/commit/?id=88dfa2938af
Simplify dependencies:
- After=alsa-state.service is not needed because both units test for
@daemonswitch@ with opposite outcomes.
- After=sysinit.target is automatically added by systemd.
First proposed by Tom Yan.
Signed-off-by: Chris Mayo <aklhfex@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a variable uninitialized issue, adding the initialized assignment to fix it.
Signed-off-by: Zhang Keqiao <keqiaox.k.zhang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes a bug when trying to play files with size
smaller than maximum supported header size.
Lets have a look at the following example:
$ aplay -s 2 sample.raw
-> playback_go(fd = 10, loaded = 26, count = 2, name="sample.raw")
--> l = loaded = 26
--> c = count - written = 2
--> c -= l = 2 - 26 = -24
---> r = safe_read(fd, audiobuf + 26, -24)
---> r = -1, EXIT_FAILURE
In this case we have already 'loaded' from the input file more
bytes that we need to send to pcm device. So, we need to adjust
the number of bytes loaded and avoid reading a negative number
of bytes.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This introduces read_header function which tries
to read the header of an audio file in order to determine
its type.
This has the following effects:
(1) makes code easier to read
(2) don't abort if file size is less than expected header
(2), allows us to play small files with size smaller than any
supported audio file headers.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-s --samples allows aplay to be used for playback/capture a given
number of samples per channel
Signed-off-by: Ion-Horia Petrisor <ion-horia.petrisor@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix bug in arecord --max-file-time where the file size could overflow
32 bits.
Signed-off-by: Scott Gilliland <scott.gilliland@gatech.edu>
Acked-by: John Sauter <John_Sauter@systemeyescomputerstore.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
verbose, compile and output options all have a parameter.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the binary output file is left when parsing fails. This confuses
GNU Make if the parsing fails and causes the compilation to partially
complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Write can return less then requested bytes, but we treat this as
an error thus ending up with confusing error messages.
Fix this by introducing xwrite helper, which makes sure all bytes
are written or an error is returned.
With this patch an usecase where disk is filled by recording will
print:
$ /mnt/msc/audio.wav: No space left on device
instead of random messages like:
$/mnt/msc/audio.wav: No such file or directory
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BIOS vendors typically reuse the same definitions between different
platforms and expose the relevant hardware by changing the value of
the _STA method.
For example on the Asus T100HA, there are 3 HID values for audio
codecs in the DSDT table but two have a zero status and will be
ignored by the ACPI subsystem.
$ more /sys/bus/acpi/devices/10EC*/status
::::::::::::::
/sys/bus/acpi/devices/10EC3270:00/status
::::::::::::::
15
::::::::::::::
/sys/bus/acpi/devices/10EC5640:00/status
::::::::::::::
0
::::::::::::::
/sys/bus/acpi/devices/10EC5648:00/status
::::::::::::::
0
This information is very useful to figure out which HIDs/quirks need
to be supported. Add log to alsa-info.sh to only expose non-zero
results of the ACPI _STA method, e.g.
!!ACPI Device Status Information
!!---------------
/sys/bus/acpi/devices/10EC3270:00/status 15
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some manufacturers don't provide useful information for Manufacturer
and Product Name but instead use Board Vendor and Board Name fields,
add them to alsa-info log
Example on Intel NUC:
!!DMI Information
!!---------------
Manufacturer:
Product Name:
Product Version:
Firmware Version: KYSKLi70.86A.0042.2016.0929.1933
Board Vendor: Intel Corporation
Board Name: NUC6i7KYB
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
`/lib/systemd/system/alsa-restore.service` specifies
`StandardOutput=syslog`. This overrides the `DefaultStandardOutput`
setting from `/etc/systemd/system.conf`, which the system administrator
can use to specify how output gets logged. In particular, the sysadmin
may want output to go to the journal, or to syslog, or nowhere at all [1].
This patch removes the definition entirely, so the units can use the
system default.
Upstream the patch from the Debian package [2].
[1] https://bugs.debian.org/741123
"systemd services should not use StandardOutput=syslog; should rely
on DefaultStandardOutput"
[2] https://sources.debian.net/src/alsa-utils/1.1.2-1/debian/patches/systemd_standardoutput.patch/
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
CC: Jordi Mallach <jordi@debian.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code releasing the each card object may access to NULL when a
bogus count is given. Add a NULL check just to make sure.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Define a USE_RST2MAN conditional so that, when available, rst2man can be
used to generate man pages from reStructuredText source files.
The code follows what is done to check for xmlto.
On Debian system, the rst2man executable is provided by python-docutils
or python3-docutils.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The same $xmlto variable is used both in AC_ARG_ENABLE and
AC_CHECK_PROG, but the latter is not setting a value to it when the
program is not found.
These two facts result in the "yes" value from the AC_ARG_ENABLE macro
to be still kept in the variable when the program is not found by
AC_CHECK_PROG, causing USE_XMLTO to be always set, finally resulting in
a build failure in case the xmlto program is not actually in the PATH.
As possible fix could have been to set "no" as a value in AC_CHECK_PROG
when program is not found.
However using two separate variables is more explicit, so fix the issue
this way.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The channel selection currently does not work properly when a channel
map control is provided but no manual channel map was explicitly
requested with "-m".
For example, the CEA/HDMI 6ch (surround 5.1) map is:
FL, FR, LFE, FC, RL, RR.
Tested command: speaker-test -D hdmi -c 6 -t wav
Speaker-test tries to play channels in this following order:
0 - Front Left
3 - Front Center
1 - Front Right
5 - Rear Right
4 - Rear Left
2 - LFE
But wav file played on associated speakers are not aligned. Here are
the real files played:
0- /usr/share/sounds/alsa/Front_Left.wav => OK
3- /usr/share/sounds/alsa/Rear_Right.wav => OK
1- /usr/share/sounds/alsa/Front_Right.wav => OK
5- /usr/share/sounds/alsa/Rear_Center.wav => KO
4- found file /usr/share/sounds/alsa/Front_Center.wav => KO
2- /usr/share/sounds/alsa/Rear_Left.wav => KO
Issue is that associated wav files ordering is reworked only if
channel_map_set variable is set.
Fix consists in allowing wavs re-ordering if a channel mapping as been
get or set, i.e. channel_map is not null.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If PCM is paused and then we do system supend-resume, the stream throws
error(EBADF) when stream is paused released.
Check the pcm state before pause/release and if stream is suspended,
call snd_pcm_resume to resume the stream.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new option to amidi tool: sysex-interval.
It adds a delay (in milliseconds) in between each SysEx message - it searches
for a 0xF7 byte.
This is very useful when sending firmware updates to a remote device via SysEx
or any other use that requires this delay in between SysEx messages.
`amidi' manual was updated with an example usage as well.
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Support audio pause/resume for playback and capture. The user can
pause alsabat playback/capture threads by sending a signal. The patch
provides a method for QA to quick test audio during system s3.
Signed-off-by: Keqiao, Zhang <keqiao.zhang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
alsabat reports -86 error when system suspend and resume. Check the
return value of read_to_pcm() and write_to_pcm(), when -x8 err is
detected, do resume and wait for read/write to pcm to complete.
Write PCM device error: Streams pipe error(-86)
Read PCM device error: Streams pipe error(-86)
*** Error in alsabat: double free or corruption (out): 0x00007fb438001810 ***
Signed-off-by: Keqiao, Zhang <keqiao.zhang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
