The recorded tick is incorrectly converted for 1us tempo-base on the
old kernels. Since we correct the queue tempo, we don't have to
adjust the returned tick value any longer. The current code applies
it doubly, resulting in 100 times slower.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The direction was wrongly passed to the FB setup. It has to be
"OUTPUT" instead of "INPUT, so that other applications can write to
arecordmidi2 port.
Fixes: 2cdf5ebedb ("arecordmidi2: Add initial version")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The queue should be started at the very same time of the start of the
stream itself in the interactive mode. Otherwise it'll get bogus long
waits until the start of the clip.
Move the code to start the queue in start_bar(), so that it's always
tied with the start sequence.
Fixes: 1205dd5f6c ("arecordmidi2: Add passive mode and interactive mode")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Allow arecordmidi2 running without specifying the source ports via -p
option. This will create a UMP Endpoint with the full 16 FBs, and
simply reads from the input ports via subscribers. User needs to
connect to the ports manually, though.
Also, add -r option to run in the interactive mode. In the
interactive mode, arecordmidi2 waits for the RETURN key entered from
the terminal to start the recording, and the recording ends after
another RETURN key.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
arecordmidi2 is a similar program like arecordmidi for recording the
incoming MIDI events, but storing in a MIDI Clip file for MIDI 2.0.
Most options are kept from arecordmidi, but some are dropped: namely,
the -l, -m and -f options are dropped for code simplicity.
Also -s option is dropped as well, as there is no need for split for
MIDI Clip file unlike SMF.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
aplaymidi2 is a program similar like aplaymidi, but intended for
playing back a MIDI Clip file that was introduced for handling UMP.
MIDI Clip file contains UMP packets, and its structure is much simpler
than SMF.
The options are mostly same as aplaymidi, but I omitted -l option for
simplifying the code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix white spaces and applied a slight code refactoring to reduce the
indentation levels. No code functionality changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A slightly better version. The extraction of a SysEx byte from a UMP
packet is more complicated than wished, in anyway.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes warnings like:
intel/dmic/dmic-process.c: In function 'select_mode':
intel/dmic/dmic-process.c:498:35: warning:
format '%s' expects a matching 'char *' argument [-Wformat=]
The intended __func__ string is missing from the two fprintf()
prints for errors.
Closes: https://github.com/alsa-project/alsa-utils/pull/270
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
aseqsend is a command-line utility which allows one to send SysEx
(system exclusive) data to ALSA MIDI seqencer port. It can also send
any other MIDI commands.
Closes: https://github.com/alsa-project/alsa-utils/pull/257
Signed-off-by: Miroslav Kovac <mixxoo@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
alsactl distributed as part of Fedora 40 got a SEGV:
# journalctl
...
May 17 00:55:58 dev64.localdomain kernel: alsactl[1923]: segfault at 28 ip 00005600705b3373 sp 00007ffd9712bef0 error 4 in alsactl[5600705af000+13000] likely on CPU 5 (core 8, socket 0)
...
As the following output of the debug session, card_free() tried a card
pointing NULL:
$ sudo coredumpctl debug alsactl
PID: 1923 (alsactl)
UID: 0 (root)
GID: 0 (root)
Signal: 11 (SEGV)
Timestamp: Fri 2024-05-17 00:55:58 JST (3h 34min ago)
Command Line: /usr/sbin/alsactl -s -n 19 -c -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --initfile=/lib/alsa/init/00main rdaemon
Executable: /usr/sbin/alsactl
Control Group: /system.slice/alsa-state.service
Unit: alsa-state.service
Slice: system.slice
Boot ID: 241b5a2ef86f4940bb3d340583c80d88
Machine ID: 437365709a8c488c9481ee4b6651c2ec
Hostname: dev64.localdomain
Storage: /var/lib/systemd/coredump/core.alsactl.0.241b5a2ef86f4940bb3d340583c80d88.1923.1715874958000000.zst (present)
Size on Disk: 81.7K
Package: alsa-utils/1.2.11-1.fc40
build-id: 3b6fec58b3566d666d6e9fd48e8fcf04f03f0152
Message: Process 1923 (alsactl) of user 0 dumped core.
Module libasound.so.2 from rpm alsa-lib-1.2.11-2.fc40.x86_64
Module alsactl from rpm alsa-utils-1.2.11-1.fc40.x86_64
Stack trace of thread 1923:
#0 0x00005600705b3373 card_free (alsactl + 0xa373)
#1 0x00005600705c0e54 state_daemon (alsactl + 0x17e54)
#2 0x00005600705b2339 main (alsactl + 0x9339)
#3 0x00007f4c0b9b7088 __libc_start_call_main (libc.so.6 + 0x2a088)
#4 0x00007f4c0b9b714b __libc_start_main_impl (libc.so.6 + 0x2a14b)
#5 0x00005600705b2df5 _start (alsactl + 0x9df5)
ELF object binary architecture: AMD x86-64
GNU gdb (Fedora Linux) 14.2-1.fc40
Copyright (C) 2023 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/sbin/alsactl...
Reading symbols from /usr/lib/debug/usr/sbin/alsactl-1.2.11-1.fc40.x86_64.debug...
[New LWP 1923]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/usr/sbin/alsactl -s -n 19 -c -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --init'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 free_list (list=0x20) at /usr/src/debug/alsa-utils-1.2.11-1.fc40.x86_64/alsactl/daemon.c:73
73 for (i = 0; i < list->size; i++)
(gdb) where
#0 free_list (list=0x20) at /usr/src/debug/alsa-utils-1.2.11-1.fc40.x86_64/alsactl/daemon.c:73
#1 card_free (card=card@entry=0x5600707455f0) at /usr/src/debug/alsa-utils-1.2.11-1.fc40.x86_64/alsactl/daemon.c:82
#2 0x00005600705c0e54 in state_daemon (file=file@entry=0x5600705c31a1 "/var/lib/alsa/asound.state", cardname=cardname@entry=0x0, period=period@entry=300,
pidfile=pidfile@entry=0x5600705c3170 "/var/run/alsactl.pid") at /usr/src/debug/alsa-utils-1.2.11-1.fc40.x86_64/alsactl/daemon.c:455
#3 0x00005600705b2339 in main (argc=<optimized out>, argv=<optimized out>) at /usr/src/debug/alsa-utils-1.2.11-1.fc40.x86_64/alsactl/alsactl.c:459
(gdb) list
68
69 static void free_list(struct id_list *list)
70 {
71 int i;
72
73 for (i = 0; i < list->size; i++)
74 free(list->list[i]);
75 free(list->list);
76 }
77
(gdb) up
#1 card_free (card=card@entry=0x5600707455f0) at /usr/src/debug/alsa-utils-1.2.11-1.fc40.x86_64/alsactl/daemon.c:82
82 free_list(&c->blacklist);
(gdb) p c
$1 = (struct card *) 0x0
(gdb)
Closes: https://github.com/alsa-project/alsa-utils/pull/267
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Lowering volume below 0 causes overflow spike to 100% volume (volume goes
below 0 and back to 100 repeatedly). 0 overflows past infinity when holding
down z,x,c.
> value = lrint_dir(6000.0 * log10(volume), dir) + max;
(where volume = 0 , and dir = -1 . min = -9999999 , and max = -6)
> log10(0) is negative infinity = error
Fixes: https://github.com/alsa-project/alsa-utils/pull/266
Reported-by: genr8eofl <genBTC@gmx.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Track SoundWire devices reported in ACPI, this will help detect
missing or invalid configurations.
For now we only filter information from Realtek, Cirrus Logic and TI,
based on the manufacturer ID of their devices.
Example log for the classic RT711/RT1316x2/RT714 configuration.
!!ACPI SoundWire Device Status Information
!!---------------
Realtek 0x000030025d071101
Realtek 0x000331025d131601
Realtek 0x000230025d131601
Realtek 0x000130025d071401
As noted by reviewers, the script reports everything exposed in
ACPI. In practice some of the devices listed may not be physically
populated in hardware, or be listed as attached on a link that's
disabled by the manager. The drivers can cope with this case, it's not
technically an error.
Closes: https://github.com/alsa-project/alsa-utils/pull/264
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
S24_LE is 32 bits in width storing 24 bits of data and 8 bits of padding
So wav header needs to be 32 bits not 24
Closes: https://github.com/alsa-project/alsa-utils/pull/260
Signed-off-by: Peter Suti <peter.suti@streamunlimited.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Many error prints had obsolete function name written in them, use
__func__ everywhere and add problematic value to the print if its
available.
Closes: https://github.com/alsa-project/alsa-utils/pull/254
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The former Burst Fifo ThresHold bits 20-23 in output register are
specified as reserved bits starting from driver version 4.
Closes: https://github.com/alsa-project/alsa-utils/pull/254
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Error if the version passed from topology is not known. Also fix the
dmic_set_params() error prints for to show the correct function name.
Closes: https://github.com/alsa-project/alsa-utils/pull/254
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
We would like to break the speaker test using Ctrl-C (SIGINT) more early.
In the default settings, the periods are too big and the responsivity
of the speaker-test utility may be several seconds.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The dmic configuration functions are called for each dmic DAI (or
FIFO) separately, and each dmic DAI is configured in their own
configuration rounds. However, the later configured dmic FIFO may
change the common clock divider and thus affect the FIR configuration
of the first configured DAI. However, the first configured FIR blob is
not touched after it is configured for the first time.
To overcome this problem always check the both FIR configurations, no
matter which DAI we are configuring.
Closes: https://github.com/alsa-project/alsa-utils/pull/250
Suggested-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
After UMP support was added in b399fb8 ev.type setting was inadvertently
dropped in the code path handling tempo meta event.
This is causing tempo meta events to not be handled at all.
Moreover, snd_seq_ev_set_fixed is also missing so MIDI files with
variable events such as SYSEX before the tempo meta event usually are
causing a segfault.
Fixes: b399fb85a9 ("aplaymidi: Add UMP support")
Closes: https://github.com/alsa-project/alsa-utils/issues/241
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the --fatal-errors happen, nothing is provided to the user even
when the '-v' verbose option is specified. This patch adds the fatal
error exit after dumping the logs. No functionality change, just
better information on what just happened.
Closes: https://github.com/alsa-project/alsa-utils/pull/242
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Make subformat first-class citizen by allowing users to specify it just
like it is the case for the format. Default to SND_PCM_SUBFORMAT_STD so
they are no surprises.
Closes: https://github.com/alsa-project/alsa-utils/pull/228
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
`strerror` takes the `errno` directly as its argument,
negating it will result in an "Unknown error".
This fixes such usages across multiple modules.
Fixes: https://github.com/alsa-project/alsa-utils/pull/245
Signed-off-by: Tianyi Liu <i.pear@outlook.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Prior this commit, memcpy from names[0] to format[] will overwrite if
strlen(names[0]) is greater than 1024. Also, the length of malloc()ed
names[channel] is insufficient, leading to another buffer overwriting
when calling sprintf(). Moreover, the format string of sprintf()
can be controlled by user input. An attacker can exploit this weakness
to crash the program, disclose information or even execute arbitrary
code.
Fix by allocating enough space for arrays and using constant expressions
as the format strings.
Fixes: https://github.com/alsa-project/alsa-utils/pull/246/
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The 'call to sprintf' operation on line 413 requires 21 bytes
but the destination is only 16 bytes.
Fixes: https://github.com/alsa-project/alsa-utils/pull/247
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This partially reverts commit 3a47ef2487 ("topology: nhlt: intel:
support more device types and directions"), which changed the default
device_type in the endpoint descriptor from zero to SSP_ANALOG.
This change breaks the Linux kernel NHLT parser (which AFAICT doesn't
recognize SSP_ANALOG at all), producing errors like:
[56458.583812] sof-audio-pci-intel-mtl 0000:00:1f.3: no matching blob for sample rate: 48000 sample width: 32 channels: 2
[56458.583833] sof-audio-pci-intel-mtl 0000:00:1f.3: failed to prepare widget dai-copier.SSP.SSP0-Codec.playback
[56458.583840] sof-audio-pci-intel-mtl 0000:00:1f.3: Failed to prepare connected widgets
[56458.583847] sof-audio-pci-intel-mtl 0000:00:1f.3: error: failed widget list set up for pcm 1 dir 0
[56458.583853] sof-audio-pci-intel-mtl 0000:00:1f.3: ASoC: error at snd_soc_pcm_component_hw_params on 0000:00:1f.3: -22
Revert for compatibility.
Fixes: https://github.com/alsa-project/alsa-utils/pull/248
Signed-off-by: Andy Ross <andyross@google.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This reverts commit 0925ad7f09.
This isn't necessary now that we use standard types (sys/types.h just
defines some compatibility typedefs).
Closes: https://github.com/alsa-project/alsa-utils/pull/234
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Needed for setlocale().
(After rebasing to pick up 8c229270f6, just
move it to be guarded as the include now exists.)
Closes: https://github.com/alsa-project/alsa-utils/pull/234
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Prior to this change bat/analyze.c would skip the last period of the recording, contrary to
what the comment in the code which stated the first period was meant to be skipped.
The comment has been updated to state that both the first and last period are skipped and the code
has been updated to match.
Closes: https://github.com/alsa-project/alsa-utils/pull/237
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for adding enum controls in the topology pre-processor.
Closes: https://github.com/alsa-project/alsa-utils/pull/236
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
