This might become a Pandora's box given
the amount of obscure package managers
on the planet but these two account for
most *nix-like systems with ALSA it seems.
Added support for querying ALSA packages
installed through rpm and dpkg; tested
on ALT (rpm) and OS Elbrus (dpkg).
Suggested-by: Anton Farygin <rider@altlinux.org>
See-also: http://bugzilla.altlinux.org/38416
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Check the return value of wget to determine if the upload actually
failed. If so, display the message about upload failure, then exit.
Do not ping the web server; the result does not indicate whether a
file upload will succeed or not.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If wget is not present, do not ask about uploading the information.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The spinner did not actually provide information about the status
of the file upload, and caused other problems: it would repeatedly
spawn new pgrep processes (without a delay between them), and it
blocked the script if any wget process was running on the system.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The gauge did not actually show the upload progress; in fact, the
dialog did not even appear until after the upload was completed.
Use an infobox instead, which will be displayed while wget runs.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The '--stdout' option is mutually exclusive with uploading the file.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Read card names directly from individual procfs files, and pass them
to amixer using the '-c' option.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sorting the list of loaded modules makes it much easier to compare
two alsa-info.txt files, even if they are both from the same system
(since the order actually changes after each reboot).
lsmod just formats the contents of /proc/modules. After this script
calls lsmod, it strips everything but module names from the output.
This same result can be obtained just as easily by reading directly
from /proc/modules; then there is no need to remove the header line
printed by lsmod before sorting the output.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include numeric IDs and subsystem info in the PCI device output,
without placing them in a separate section.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix awk arguments
- backticks/gravemarks removal
- some cosmetic and indentation changes
- add REQUIRES to check the basic tools
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
BIOS vendors typically reuse the same definitions between different
platforms and expose the relevant hardware by changing the value of
the _STA method.
For example on the Asus T100HA, there are 3 HID values for audio
codecs in the DSDT table but two have a zero status and will be
ignored by the ACPI subsystem.
$ more /sys/bus/acpi/devices/10EC*/status
::::::::::::::
/sys/bus/acpi/devices/10EC3270:00/status
::::::::::::::
15
::::::::::::::
/sys/bus/acpi/devices/10EC5640:00/status
::::::::::::::
0
::::::::::::::
/sys/bus/acpi/devices/10EC5648:00/status
::::::::::::::
0
This information is very useful to figure out which HIDs/quirks need
to be supported. Add log to alsa-info.sh to only expose non-zero
results of the ACPI _STA method, e.g.
!!ACPI Device Status Information
!!---------------
/sys/bus/acpi/devices/10EC3270:00/status 15
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some manufacturers don't provide useful information for Manufacturer
and Product Name but instead use Board Vendor and Board Name fields,
add them to alsa-info log
Example on Intel NUC:
!!DMI Information
!!---------------
Manufacturer:
Product Name:
Product Version:
Firmware Version: KYSKLi70.86A.0042.2016.0929.1933
Board Vendor: Intel Corporation
Board Name: NUC6i7KYB
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
... otherwise it overwrites a zero size file. Also add a check of
zero size file in the update procedure, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Previously, using --output, --no-upload, --upload and --pastebin
switches implied the withall switch.
A more intuitive logic would be that --with-all is disabled if you
use another --with* switch, such as --withdmesg, and only then.
Also update script version to reflect the behaviour change.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For some reason, when the --output option is used, less information
is included compared to when no options are used. This is unexpected.
Fix this by running "withall" also when the output option is used.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
