config.h may contain defines like _FILE_OFFSET_BITS which influence
the system wide include files (off_t types, open -> open64 function
usage etc.).
Related: https://github.com/alsa-project/alsa-utils/pull/223
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Expand the pre-processor to allow for expanding the definitions,
object attribute references and arithmetic expressions within strings.
With this extension its possible to embedded definitions or attribute
references into topology string objects. For example:
Define {
PCM_NUMBER 1
}
Object.Pipeline {
pcm-playback.0 {
Object.Widget {
copier.1 {
copier_type "host"
}
gain.1 {
Object.Control.mixer.1 {
name 'hw:$[$PCM_NUMBER - 1] Playback Volume'
}
}
Object.Base {
route.1 {
source copier.host.$index.1
sink gain.$index.1
}
}
}
In the example the $[$PCM_NUMBER - 1] would be replaced with the
result of arithmetic expression '1 - 1' in other words '0' , and
$index in all occurrences with index attribute found from pipeline
object. Any non alpha numeric or '_' character are treated as
delimiters for variable names if $[]-notation is not used.
Fixes: https://github.com/alsa-project/alsa-utils/pull/189
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
With the introduction of variables in the topology files, validation of
attributes values must be done after they are expanded to their defined
values. Also, since valid values for attributes in the class definition
can also be variables, they need to be expanded as well. So, first expand
the attribute values and then check them against expanded valid values.
Fixes: https://github.com/alsa-project/alsa-utils/pull/138
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The defines from the command line must overwrite the defines
from the included configuration files forcefully.
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Remove the call to snd_config_expand_custom() to expand the top-level
input config. And replace it with calls to snd_config_evaluate_string()
for each non-compound config while processing individual objects. This
will allow retreving variable definitions from object attribute values
and global definitions.
Add a new field "current_obj_cfg" to hold the current object config
being pre-processed.
This will facilitate adding simple math expressions for computing
attribute values for objects based on other attributes. For ex: we can
set the expression for buffer size as follows:
buffer_size "$[($in_channels * 48) * 4]"
The buffer_size attribute value will be computed with the attribute
value "in_channels" based on the expression above. So if $in_channels =
2, buffer_size will be evaluated to 384.
Additionally this change also permits computing attribute values based
on previously computed values. For example:
buffer_size "$[($in_channels * 48) * 4]"
dma_buffer_size "$[$buffer_size * 2]"
dma_buffer_size will be computed as 768. Note that the order of
definitions for buffer_size and dma_buffer_size matters because the
evaluation for dma_buffer_size depends on the evaluation of buffer_size.
In order to conform to this, the tplg_object_copy_and_add_param() is
modified to add attribute configs from class config to an object using
snd_config_before() instead of snd_config_add().
With this change, we no longer need to set the auto_attr_updater for
buffer type widget objects. So remove it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
An object can be declared within a class definition as follows:
Class.Pipeline.volume-playback {
Object.Widget.pga.0 {
ramp_step_ms 250
}
}
While instantiating the volume-pipeline class, the pga object
could be modified as follows:
Object.Pipeline.volume-playback.0 {
Object.Widget.pga.0 {
format "s24le"
}
}
When building the pga.0 object in the class definition, merge
the attributes declared in the volume-playback.0 object to create
a new config as follows to make sure that all attributes are
set for the pga object.
Object.Widget.pga.0 {
ramp_step_ms 250
format "s24le"
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Do not create TLV config if it exists already. Just
set the string value with the name name.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Allow support for adding data section for kcontrols.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Skip creating section when it exists already.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Nothing to do for top-level objects with no parent.
Also, add access to the bytes control template.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Some objects just need tobe processed to add their attributes
to the private data section of their parent objects.
An example of this would be the pdm_config objects for
DMIC DAI's. Each pdm_config object's attributes need
to be added as separate arrays in the DAI object's
private data.
Modify the signature of tplg_add_object_data() to pass
the array_name parameter when multiple objects of the
same type in the same parent are processed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add the function to compute the value for the
"size" automatic attribute in the buffer objects.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Classes definitions in Topology2.0 can have attributes
qualified with the "automatic" constraint. Values for
these attributes will be calculated by the compiler.
This patch provides a generic method for defining automatic
attributes computation logic for different classes.
To update automatic attributes for a class, add an item
in object_build_map with auto_attr_updater defined, and then
add updating logic in the custom auto_attr_updater function.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds check to the return pointer from strchr,
because it may be null and cause segment fault, if component
is not properly constructed.
Fixes: https://github.com/alsa-project/alsa-utils/pull/91
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for processing object instances embedded
within objects and classes. For example:
Object.Control.mixer."0" {
#Channel register and shift for Front Left/Right
Object.Base.channel."fl" {
shift 0
}
Object.Base.channel."fr" {
}
Object.Base.tlv."vtlv_m64s2" {
Object.Base.scale."m64s2" {
mute 1
}
}
Object.Base.ops."ctl" {
info "volsw"
#256 binds the mixer control to volume get/put handlers
get 256
put 256
}
}
and pga class embeds the mixer objects as follows:
Class.Widget."pga" {
...
Object.Control {
mixer."0" {...}
mixer."1" {...}
}
The pre-processor starts with the top-pevel PGA widget object
and processes the mixer objects in the class definition.
This will recursively pre-processes its child objects to add the channels,
tlv and ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for fe_dai objects:
For ex:
Object.PCM.pcm."0" {
name "Port0"
direction "duplex"
Object.Base.fe_dai."Port 0" {}
}
will be converted to update the SectionPCM as follows:
SectionPCM {
Port0 {
id 0
dai {
'Port 0' {
id 0
}
}
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing PCM and BE DAI objects:
Object.PCM.pcm."0" {
name "Port0"
direction "duplex"
}
will be converted to:
SectionPCM.'Port0' {}
The capabilities and dai configs will be added those objects are pre-processed.
An ex of DAI object would be:
Object.Dai.SSP."0" {
direction "duplex"
stream_name "NoCodec-0"
id 0
default_hw_conf_id 0
format "s24le"
quirks "lbm_mode"
sample_bits 24
}
converted to:
SectionBE {
'SSP.0.duplex' {
id 0
stream_name NoCodec-0
default_hw_conf_id 0
data [
'SSP.0.duplex.sof_tkn_intel_ssp.word'
'SSP.0.duplex.sof_tkn_dai.word'
'SSP.0.duplex.sof_tkn_dai.string'
'SSP.0.duplex.sof_tkn_intel_ssp.short'
]
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
DAPM route objects such as:
Object.Base.route."1" {
source "dai.SSP.0.dai.capture"
sink "buffer.2.1"
}
will be converted to:
SectionGraph."Endpoint.route.1" {
index 0
lines [
"dai.SSP.0.capture, , buffer.2.1"
]
}
If the source/sink names are references to objects within a parent pipeline
object, the index attribute value can be skipped and it will be
populated when the object is pre-processed
Object.Pipeline.volume-capture."1" {
Object.Base.route."1" {
source "pga..0"
sink "buffer..0"
}
}
The reference pga..0 will need to be resolved to
get the widget name pga.1.0 and buffer..0 will
be resolved to buffer.1.0 before creating the SectionGraph as follows:
SectionGraph."volume-capture.1.route.1" {
index 2
lines [
"pga.1.0, , buffer.1.0"
]
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing mixer and byte control objects.
For ex: a pga widget with a mixer control as follows:
Object.pga"0" {
...
mixer.0 {
index 2
max 32
name "2 MasterPlaybackControl"
Object.Base.channel."fl" {
shift 0
}
Object.Base.channel."fr" {
}
Object.Base.tlv."vtlv_m64s2" {
Object.Base.scale."m64s2" {
mute 1
}
}
Object.Base.ops."ctl" {
info "volsw"
#256 binds the mixer control to volume get/put handlers
get 256
put 256
}
access [
read_write
tlv_read
]
}
}
Would be converted to:
SectionControlMixer.'2 Master Playback Volume' {
index 2
max 32
channel {
fl {
reg 1
}
fr {
reg 1
shift 1
}
}
tlv "vtlv_m64s2"
ops.0 {
info volsw
get 256
put 256
}
access [
read_write
tlv_read
]
}
and the SectionWidget for pga.2.0 would be updated to add the mixer references as follows:
SectionWidget.'pga.2.0' {
...
mixer [
"2 Master Playback Volume"
]
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing scale/ops/channel objects
and adding the converted config to the relevant sections.
For ex:
Object.Base.channel."fl" {
shift 0
reg 1
}
Object.Base.channel."fr" {
reg 1
shift 1
}
Will be converted to:
channel {
fl {
reg 1
shift 0
}
fr {
reg 1
shift 1
}
}
And added to the SectionControlMixer that this object belongs to.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing TLV objects
For example:
Object.Base.tlv."vtlv_m64s2" {}
will be converted to:
SectionTLV.'vtlv_m64s2' {}
And the mixer controle section will be updated to add
the reference to the tlv object.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing DAPM widget opbects.
For ex:
Object.Widget.pga."0" {
pipeline_id 1
no_pm true
type pga
}
will be converted to:
SectionWidget.'pga.0' {
index 1
type pga
no_pm 1
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing VendorToken objects.
For ex:
Object.Base.VendorToken."sof_tkn_dai" {
dmac_config 153
dai_type 154
index 155
direction 156
}
would be converted to:
SectionVendorTokens."sof_tkn_dai" {
dmac_config 153
dai_type 154
index 155
direction 156
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Pre-process data objects, create the SectionData and update
the parent object with the reference to the object.
For example, the following object instance:
Object.Base.data."SOF_ABI" {
bytes "0x03,0x12,0x01"
}
would update the SectionManifest as follows:
SectionManifest."sof_manifest" {
data [
"SOF_ABI"
]
}
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a helper function to retrieve the config node
pointing to the section name for a given object.
For ex: for the object, Object.Widget.pga.1{},
the function returns the config with id, "SectionWidget"
in the output config.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Objects that have attributes with token_ref need
to have separate SectionData and SectionVendorTuples
for each unique token_ref based on the attribute_sets
in the object's attribute_set_list.
Add the tplg_pp_add_object_data()
function to add the data[] refs in the object and also
the respective SectionData and SectionVendorTuples.
For example for the pga object:
Object.Widget.pga."0" {
pipeline_id 2
format s24le
type pga
no_pm 1
uuid "7e:67:7e:b7:f4:5f:88:41:af:14:fb:a8:bd:bf:8"
period_sink_count 2
period_source_count 2
ramp_step_ms 250
ramp_step_type "linear"
mixer.0 {
....
}
mixer.0.name "2 Master Playback Volume"
}
The following sections will be added:
SectionWidget.'pga.2.0' {
index 2
type pga
no_pm 1
mixer [
"2 Master Playback Volume"
]
bytes [
]
data [
"pga.2.0.sof_tkn_comp.word"
"pga.2.0.sof_tkn_comp.string"
"pga.2.0.sof_tkn_comp.uuid"
"pga.2.0.sof_tkn_volume.word"
]
}
SectionData."pga.2.0.sof_tkn_comp.word" {
tuples "pga.2.0.sof_tkn_comp.word"
}
SectionData."pga.2.0.sof_tkn_comp.string" {
tuples "pga.2.0.sof_tkn_comp.string"
}
SectionData."pga.2.0.sof_tkn_comp.uuid" {
tuples "pga.2.0.sof_tkn_comp.uuid"
}
SectionData."pga.2.0.sof_tkn_volume.word" {
tuples "pga.2.0.sof_tkn_volume.word"
}
SectionVendorTuples."pga.2.0.sof_tkn_comp.word" {
tokens "sof_tkn_comp"
tuples."word" {
period_source_count "2"
period_sink_count "2"
}
}
SectionVendorTuples."pga.2.0.sof_tkn_comp.string" {
tokens "sof_tkn_comp"
tuples."string" {
format "s24le"
}
}
SectionVendorTuples."pga.2.0.sof_tkn_comp.uuid" {
tokens "sof_tkn_comp"
tuples."uuid" {
uuid "7e:67:7e:b7:f4:5f:88:41:af:14:fb:a8:bd:bf:8"
}
}
SectionVendorTuples."pga.2.0.sof_tkn_volume.word" {
tokens "sof_tkn_volume"
tuples."word" {
ramp_step_ms "250"
ramp_step_type "0"
}
}
Note that the ramp_step_type of "linear" is converted
to the tuple value 0.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The pre-processor converts the Topology2.0 objects into
the relevant sections by looking for attributes defined
in the template config for the section and reading the
attribute values from the object instance config.
The structure struct build_function_map contains the
mapping of the build function to use for each object
based on the type and name for the class that the object
belongs to. The manifest object is the simplest with
no attributes. So, the build function simply creates
a new Section called SectionManifest which will be
populated with the data section in the following patches.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
An object's name is derived from its constructor attribute
values separated by '.'. For example, the name for the
host widget objects is derived from its index and direction
attribute values as follows:
Object.Widget.host."playback" {
index 2
}
The name for the host widget object would be host.2.playback.
Alternatively, if the object has a name attribute, the class
definition may skip the constructor attributes and the name attribute
value will be used instead.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Attributes can have constraints set for valid values, min
or max values. If the attribute value is set in an object,
the value must be validated against the set constraints.
An example for attribute constraint would be:
DefineAttribute."direction" {
constraints {
valid_values [
"playback"
"capture"
]
tuple_values [
0
1
]
}
}
where the tuple_values array would translate the valid_values of
playback as 0 and capture as 1.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Object attributes can be set in multiple places. Search for
the attribute value in the following order:
1. Value set in object instance
2. Default value set in the object's class definition
3. Inherited value from the parent object
4. Value set in the object instance embedded in the parent object
5. Value set in the object instance embedded in the parent class definition
Mandatory attributes must be found in one of the above, resulting
in an error if not found.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing object instances in the input
config. An object's attributes can be set in multiple places
such as, within the object instance, default values in the class
defnition, inherited from a parent object or explicitly set
in a parent object. Before converting the object config into
the relevant section in the existing syntax, all the attribute
values must be consolidated into one place so that it is easy
to verify if all mandatory attributes are set.
Also, the name of the object will be constructed from the
attributes defined in the attributes.constructor[] config
in the class definition and the unique attribute's value
must be set from the value passed in the object instance.
This patch create a temporary config for each object instance
and populates its unique attribute value. The rest of the steps
will be added in the following patches.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
