This patch fixes warnings like:
intel/dmic/dmic-process.c: In function 'select_mode':
intel/dmic/dmic-process.c:498:35: warning:
format '%s' expects a matching 'char *' argument [-Wformat=]
The intended __func__ string is missing from the two fprintf()
prints for errors.
Closes: https://github.com/alsa-project/alsa-utils/pull/270
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Many error prints had obsolete function name written in them, use
__func__ everywhere and add problematic value to the print if its
available.
Closes: https://github.com/alsa-project/alsa-utils/pull/254
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The former Burst Fifo ThresHold bits 20-23 in output register are
specified as reserved bits starting from driver version 4.
Closes: https://github.com/alsa-project/alsa-utils/pull/254
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Error if the version passed from topology is not known. Also fix the
dmic_set_params() error prints for to show the correct function name.
Closes: https://github.com/alsa-project/alsa-utils/pull/254
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The dmic configuration functions are called for each dmic DAI (or
FIFO) separately, and each dmic DAI is configured in their own
configuration rounds. However, the later configured dmic FIFO may
change the common clock divider and thus affect the FIR configuration
of the first configured DAI. However, the first configured FIR blob is
not touched after it is configured for the first time.
To overcome this problem always check the both FIR configurations, no
matter which DAI we are configuring.
Closes: https://github.com/alsa-project/alsa-utils/pull/250
Suggested-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
config.h may contain defines like _FILE_OFFSET_BITS which influence
the system wide include files (off_t types, open -> open64 function
usage etc.).
Related: https://github.com/alsa-project/alsa-utils/pull/223
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Remove "fs not set" print from dmic processing. The message is printed out
when pdm is enabled but not configured. Many sof topologies enable all
pdms even if not used as it is a requirement for some Intel firmware
versions to work correctly.
Fixes: https://github.com/alsa-project/alsa-utils/pull/218
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Dmic stereo mode should be set only in hw version 1. In later hw
versions this bit is reserved.
Fixes: https://github.com/alsa-project/alsa-utils/pull/222
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.ntel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Dmic find_modes function was used with same sampling rate for both fifo
a and b parameter calculations. This bug was found in testing two
simultaneous dmic dais in topology. Fix this by introducing a sampling
rate argument for find_modes.
Fixes: https://github.com/alsa-project/alsa-utils/pull/148
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add Intel nhlt acpi table encoder plugin into topology2.0 processing.
Nhlt internal structure is defined in:
https://01.org/sites/default/files/595976_intel_sst_nhlt.pdf
Nhlt acpi table contain vendor specific binary data blobs that are used
in some Intel dsp platforms for configuring the dmic and ssp hardware.
The function of this code is mainly to generate the vendor specific
binary blobs, but as there is existing nhlt parser code and header in
kernel there's no point of re-inventing the container: just use the
existing nhlt acpi table format. Basically this code is creating similar
nhlt acpi table that you would get from: cat
/sys/firmware/acpi/tables/NHLT
This code will have implementation for dmic and ssp endpoints. Thus the
code will translate the topology dai tokens into vendor specific binary
blobs and pack them into nhlt acpi table. Ssp and dmic code is lifted
from Sound Open Firmware (sof) code base, thus it will have BSD-3
license.
This plugin can be enabled from command line with:
alsatplg -DPREPROCESS_PLUGINS="nhlt" -c foo.conf -p -o bar.tplg
You can also dump the nhlt binary into a file with additional define:
-DNHLT_BIN="nhlt.bin"
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
