config.h may contain defines like _FILE_OFFSET_BITS which influence
the system wide include files (off_t types, open -> open64 function
usage etc.).
Related: https://github.com/alsa-project/alsa-utils/pull/223
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Introduce a new keyword, "CombineArrays" to instantiate multiple nodes
of the type specified. For example:
CombineArrays.Object.Base.input_audio_format [
{
in_rate [
8000
16000
48000
]
in_bit_depth [
32
]
in_valid_bit_depth [
24
32
]
}
]
This would be expanded into 6 objects with the rate, bit_depth and
valid_bit_depth combinations of the arrays of values above.
Object.Base.input_audio_format [
{
in_rate 8000
in_bit_depth 32
in_valid_bit_depth 32
}
{
in_rate 16000
in_bit_depth 32
in_valid_bit_depth 32
}
{
in_rate 48000
in_bit_depth 32
in_valid_bit_depth 32
}
{
in_rate 8000
in_bit_depth 32
in_valid_bit_depth 24
}
{
in_rate 16000
in_bit_depth 32
in_valid_bit_depth 24
}
{
in_rate 48000
in_bit_depth 32
in_valid_bit_depth 24
}
]
The CombineArrays definition is an array so that multiple combinations can
be specified in order to deal with only valid combinations. For example,
16-bit bit_depth is only valid with 16-bit valid_bit_depth. So if we
also want to add those combinations with the multiple rates, the
definition would look like:
CombineArrays.Object.Base.input_audio_format [
{
in_rate [
8000
16000
48000
]
in_bit_depth [
32
]
in_valid_bit_depth [
24
32
]
}
{
in_rate [
8000
16000
48000
]
in_bit_depth [
16
]
in_valid_bit_depth [
16
]
}
]
Fixes: https://github.com/alsa-project/alsa-utils/pull/216
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The REG_ICASE flag is a compile-time flag (cflags), it
should be used with regcomp() instead of regexec(). Also
add the REG_EXTENDED flag in this patch to make patterns
like 'tgl|adl' work.
Fixes: https://github.com/alsa-project/alsa-utils/pull/195
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Currently, The IncludeByKey mechanism only supports conditionally
including a topology conf file. Even if we only
want to conditionally include a small conf block, we have
to use a conf file and in the end we will have a lot of
trivial conf files that only contain a single conf blocks.
This patch extends the use of IncludeByKey ito support including conf
blocks conditionally. For example, the block below will include the route
conditionally based on the variable definition COPIER_ROUTE.
Define {
COPIER_ROUTE 1
}
IncludeByKey.COPIER_ROUTE {
"1" {
Object.Base.route.11 {
source copier.module.8.2
sink copier.module.17.2
}
}
}
Fixes: https://github.com/alsa-project/alsa-utils/pull/187
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Co-authored-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Let's propagate nhlt plugin error to main program,
so that we don't generate a wrong nhlt blob silently.
Fixes: https://github.com/alsa-project/alsa-utils/pull/181
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a simple plugin interface for processing the topology tree. There
can be cases where parts of the topology need to be translated from the
original format into something else. For example one could calculate
some kind of filter coefficients from filter parameters or some other
binary interface parameters from plain text topology tokens.
Mechanism is similar as in alsa-plugins and in the plugin there should
be only 1 function exported of the form:
int _snd_topology_##pluginname##_process (snd_config_t *input, snd_config_t *output)
Input and output parameters are snd_config tree before and after topology2
pre-processing. So the plugin can modify both if needed. There are cases
where the plugin may need to get information from input tree, but make
modifications to the output.
The plugins to be used can be defined in command line with:
alsatplg -DPREPROCESS_PLUGINS="foobar" -c topology.conf -p -o topology.tplg
Multiple plugins should be separated by ":".
Plugins to be used can also be defined with "Define" clause inside the
topology file (but command line takes precedence):
Define {
PREPROCESS_PLUGINS "foobar"
}
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In case there are not command line definitions, there is nothing to
merge or delete.
Fixes: https://github.com/alsa-project/alsa-utils/pull/141
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The bellow commit assumed that the merge of the included file
is to the main configuration tree, but it's for the subtree.
The Define compound from the included file must be handled
separately.
Link: https://github.com/alsa-project/alsa-utils/pull/140
Fixes: e1a0711 ("topology: fix the command line define merge for new includes")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Parse the configuration tree only one time and then reuse
it for the merge.
Also, do not pass inc_path to all functions - add it
to the pre-processor structure.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The defines from the command line must overwrite the defines
from the included configuration files forcefully.
Link: https://github.com/alsa-project/alsa-utils/pull/129
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Remove the call to snd_config_expand_custom() to expand the top-level
input config. And replace it with calls to snd_config_evaluate_string()
for each non-compound config while processing individual objects. This
will allow retreving variable definitions from object attribute values
and global definitions.
Add a new field "current_obj_cfg" to hold the current object config
being pre-processed.
This will facilitate adding simple math expressions for computing
attribute values for objects based on other attributes. For ex: we can
set the expression for buffer size as follows:
buffer_size "$[($in_channels * 48) * 4]"
The buffer_size attribute value will be computed with the attribute
value "in_channels" based on the expression above. So if $in_channels =
2, buffer_size will be evaluated to 384.
Additionally this change also permits computing attribute values based
on previously computed values. For example:
buffer_size "$[($in_channels * 48) * 4]"
dma_buffer_size "$[$buffer_size * 2]"
dma_buffer_size will be computed as 768. Note that the order of
definitions for buffer_size and dma_buffer_size matters because the
evaluation for dma_buffer_size depends on the evaluation of buffer_size.
In order to conform to this, the tplg_object_copy_and_add_param() is
modified to add attribute configs from class config to an object using
snd_config_before() instead of snd_config_add().
With this change, we no longer need to set the auto_attr_updater for
buffer type widget objects. So remove it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a new keyword "IncludeByKey" that will be used to conditional
include configuration files based on the argument value supplied during
build time. For example:
IncludeByKey.DMIC_CH_COUNT {
"[1-4]" "include/platform/intel/dmic-generic.conf"
}
The above config will include the dmic-generic.conf file if the argument
value for DMIC_CH_COUNT is between 1 and 4.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a -D switch to be able to pass pre-processor definitions that will
be used to expand arguments in the input config file. This will be
useful to generate multiple topology binaries from the same input config
file with different argument values.
For example: if we had a pipeline config as follows:
Object.Pipeline {
volume-playback.1 {
dynamic_pipeline $DYNAMIC_PIPELINE
}
}
We can define the variable for DYNAMIC_PIPELINE as:
Define {
DYNAMIC_PIPELINE 0
}
And when pre-processing the conf file pass "-D DYNAMIC_PIPELINE=1" to
override the default value for dynamic_pipeline attribute in the input
conf file.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix typo in config variable name. Should be n2 instead of n.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for pre-processing object instances in the input
config. An object's attributes can be set in multiple places
such as, within the object instance, default values in the class
defnition, inherited from a parent object or explicitly set
in a parent object. Before converting the object config into
the relevant section in the existing syntax, all the attribute
values must be consolidated into one place so that it is easy
to verify if all mandatory attributes are set.
Also, the name of the object will be constructed from the
attributes defined in the attributes.constructor[] config
in the class definition and the unique attribute's value
must be set from the value passed in the object instance.
This patch create a temporary config for each object instance
and populates its unique attribute value. The rest of the steps
will be added in the following patches.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The pre-processor needs to concatinate strings separated
by '.' for building object names from constructor attribute
values and searching for configs with ID's containing strings
separate by '.'. Add a helper function to concat strings in
the specified input format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a couple of helper functions for searching config by ID and
creating and adding configs to a parent config.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a couple of helper functions to print debug messages
and the generated config.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds support for pre-processing the Topology2.0.
The '-p' switch add pre-processing support during compilation
and the '-P' switch is for converting the Topology2.0
configuration file into the existing syntax.
Topology2.0 is a high level keyword extension on top of the existing ALSA
conf topology format designed to:
1) Simplify the ALSA conf topology definitions by providing high level
"classes" so topology designers need to write less config for common
object definitions.
2) Allow simple reuse of objects. Define once and reuse (like M4) with
the ability to alter objects configuration attributes from defaults.
3) Allow data type and value verification. This is not done today and
frequently crops up in FW bug reports.
Common Topology Classes
-----------------------
Topology today has some common classes that are often reused throughout
with slightly altered configurations. i.e. widgets (components),
pipelines, dais and controls.
Topology2.0 introduces the high level concept of reusable "class" like
definition for that can be used to create topology objects.
Common Topology Attributes
--------------------------
Topology defines a lot of attributes per object with different types
and constraints. Today there is no easy way to validate type or
constraints and this can lead to many hard to find problems in FW at
runtime.
A new keyword "DefineAttribute" has been added to define attribute
constraints such as min value, max value, enum_values etc. This
then allows alsatplg to validate each topology object attribute.
Topology Classes define the list of attributes that they use and
whether the attribute is mandatory, can be overridden by parent users
or is immutable. This also helps alsatplg emit the appropriate errors
for attribute misuse.
Class constructor attributes
----------------------------
Some attributes in the class definition are declared as constructor
attributes and these will be used to construct the name of the object.
For ex: for the host widget, the index and direction are constructor
attributes and the name for the widget is derived as follows:
host.1.playback or host.2.capture etc.
Attribute Inheritance:
----------------------
One of the key features of Topology2.0 is how the attribute values are
propagated from a parent object to a child object. For ex: a pipeline
object can pass down the pipeline_id attribute to all its widgets.
Inheritance is implicit when an object and its embedded child objects
have matching names for a attribute/argument. Attribute values
set explicitly in an object instance always has precedence over
the values inherited from the parent object.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
1
1
1
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
