Needed for setlocale().
(After rebasing to pick up 8c229270f6, just
move it to be guarded as the include now exists.)
Closes: https://github.com/alsa-project/alsa-utils/pull/234
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Prior to this change bat/analyze.c would skip the last period of the recording, contrary to
what the comment in the code which stated the first period was meant to be skipped.
The comment has been updated to state that both the first and last period are skipped and the code
has been updated to match.
Closes: https://github.com/alsa-project/alsa-utils/pull/237
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add support for adding enum controls in the topology pre-processor.
Closes: https://github.com/alsa-project/alsa-utils/pull/236
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This fixes an issue compiling with the musl libc.
Fixes: https://github.com/alsa-project/alsa-utils/issues/238
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This solves an issue compiling with the musl libc.
Fixes: https://github.com/alsa-project/alsa-utils/issues/239
Signed-off-by: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
We need to support older compilers than GCC 11.
Link: https://github.com/alsa-project/alsa-utils/issues/233
Fixes: 181e190 ("aplaymidi: fix the verbose compilation warnings for latest gcc")
Fixes: a03377a ("aseqnet: fix the verbose compilation warnings for latest gcc")
Fixes: 429c32a ("aseqdump: fix the verbose compilation warnings for latest gcc")
Fixes: 0b48dd6 ("aconnect: fix the verbose compilation warnings for latest gcc")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fixes: 613372d
Fixes: cff2d1c
Compile errors when building in a subdir:
alsactl/alsactl.c:33:10: fatal error: os_compat.h: No such file or directory
33 | #include "os_compat.h"
| ^~~~~~~~~~~~~
alsactl/lock.c:34:10: fatal error: os_compat.h: No such file or directory
34 | #include "os_compat.h"
| ^~~~~~~~~~~~~
Fixes: https://github.com/alsa-project/alsa-utils/pull/213
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
config.h may contain defines like _FILE_OFFSET_BITS which influence
the system wide include files (off_t types, open -> open64 function
usage etc.).
Related: https://github.com/alsa-project/alsa-utils/pull/223
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds to switch the operation mode of aseqdump to specify
how the values are shown. Namely, it allows to show the MIDI 2.0
values in two more different ways: compatible "normalized" view and
percentage view, in addition to the default "raw" view.
The "raw" view mode just shows the value found in the event almost as
is. The MIDI 2.0 values are shown in 16 or 32bit hex numbers.
The channel and UMP group numbers are 0-based, taking from 0 to 15.
OTOH, in the normalized view, the 16bit or 32bit velocity and data
values of MIDI 2.0 are normalized to the value fit in MIDI 1.0,
i.e. from 0 to 127, but with decimal points. Similarly, the pitch
wheel values are normalized between -8192 to 8191.
Also, the channel numbers and UMP group numbers are 1-based, taking
from 1 to 16.
In the percentage view, the velocity and data values are normalized
and shown in percentage, from 0% to 100%. The pitch wheel is
normalized from -100% to 100%. The channel and UMP groups are 1-based
as well as in normalized view mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Correct the wrong value shown in MIDI2 default output (status instead
of channel). Also adjust the printf formats to use %2d consistently
for the channel numbers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The outputs from UMP MIDI 1.0 are slightly differently shown as the
legacy MIDI 1.0 (the velocities and values are in hex), which is
rather confusing. Let's make them look more similar.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove "fs not set" print from dmic processing. The message is printed out
when pdm is enabled but not configured. Many sof topologies enable all
pdms even if not used as it is a requirement for some Intel firmware
versions to work correctly.
Fixes: https://github.com/alsa-project/alsa-utils/pull/218
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The previous version contained some hand edit mistakes those
impacted the filter frequency response. The used generator script
is found from directory:
https://github.com/thesofproject/sof/tree/main/tools/tune/dmic .
Use command "dmic_batch.h" to generate these and copy new version
to alsa-utils.
Fixes: https://github.com/alsa-project/alsa-utils/pull/218
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In current NHLT table the device type of all SSP endpoints are set to
BT Sideband(0) instead of SSP Analog Codec(4) and the direction only
supports Render(0) and Capture(1).
Here we introduce two new quirks from topology to set the device type
correctly and support two more directions: Render with loopback(2)
and Feedback for render(3) for speakers with echo reference or IV
sense feedback.
Fixes: https://github.com/alsa-project/alsa-utils/pull/226
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Introduce a new keyword, "CombineArrays" to instantiate multiple nodes
of the type specified. For example:
CombineArrays.Object.Base.input_audio_format [
{
in_rate [
8000
16000
48000
]
in_bit_depth [
32
]
in_valid_bit_depth [
24
32
]
}
]
This would be expanded into 6 objects with the rate, bit_depth and
valid_bit_depth combinations of the arrays of values above.
Object.Base.input_audio_format [
{
in_rate 8000
in_bit_depth 32
in_valid_bit_depth 32
}
{
in_rate 16000
in_bit_depth 32
in_valid_bit_depth 32
}
{
in_rate 48000
in_bit_depth 32
in_valid_bit_depth 32
}
{
in_rate 8000
in_bit_depth 32
in_valid_bit_depth 24
}
{
in_rate 16000
in_bit_depth 32
in_valid_bit_depth 24
}
{
in_rate 48000
in_bit_depth 32
in_valid_bit_depth 24
}
]
The CombineArrays definition is an array so that multiple combinations can
be specified in order to deal with only valid combinations. For example,
16-bit bit_depth is only valid with 16-bit valid_bit_depth. So if we
also want to add those combinations with the multiple rates, the
definition would look like:
CombineArrays.Object.Base.input_audio_format [
{
in_rate [
8000
16000
48000
]
in_bit_depth [
32
]
in_valid_bit_depth [
24
32
]
}
{
in_rate [
8000
16000
48000
]
in_bit_depth [
16
]
in_valid_bit_depth [
16
]
}
]
Fixes: https://github.com/alsa-project/alsa-utils/pull/216
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Dmic stereo mode should be set only in hw version 1. In later hw
versions this bit is reserved.
Fixes: https://github.com/alsa-project/alsa-utils/pull/222
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.ntel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
By switching via the new option -u, aplaymidi can behave as a UMP
client and output UMP packets instead of legacy sequencer events.
As of now, the only supported version is 1.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
