alsa-utils/alsa-info/alsa-info.sh
Pierre-Louis Bossart cc0bcef813 alsa-info.sh: log SoundWire devices reported in ACPI
Track SoundWire devices reported in ACPI, this will help detect
missing or invalid configurations.

For now we only filter information from Realtek, Cirrus Logic and TI,
based on the manufacturer ID of their devices.

Example log for the classic RT711/RT1316x2/RT714 configuration.

!!ACPI SoundWire Device Status Information
!!---------------

Realtek 0x000030025d071101
Realtek 0x000331025d131601
Realtek 0x000230025d131601
Realtek 0x000130025d071401

As noted by reviewers, the script reports everything exposed in
ACPI. In practice some of the devices listed may not be physically
populated in hardware, or be listed as attached on a link that's
disabled by the manager. The drivers can cope with this case, it's not
technically an error.

Closes: https://github.com/alsa-project/alsa-utils/pull/264
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2024-04-22 10:03:28 +02:00

1019 lines
29 KiB
Bash
Executable file

#!/bin/bash
SCRIPT_VERSION=0.5.3
CHANGELOG='https://www.alsa-project.org/alsa-info.sh.changelog'
#################################################################################
#Copyright (C) 2007 Free Software Foundation.
#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.
#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##################################################################################
# The script was written for 2 main reasons:
# 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
# 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.
#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C
# Change the PATH variable, so we can run lspci (needed for some distros)
PATH="$PATH:/bin:/sbin:/usr/bin:/usr/sbin"
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY='C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc'
WGET="$(command -v wget)"
REQUIRES=(mktemp grep pgrep awk date uname cat sort dmesg amixer alsactl)
#
# Define some simple functions
#
update() {
test -z "$WGET" || test ! -x "$WGET" && return
SHFILE=$(mktemp -t alsa-info.XXXXXXXXXX) || exit 1
wget -O $SHFILE "https://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
REMOTE_VERSION=$(grep SCRIPT_VERSION $SHFILE | head -n1 | sed 's/.*=//')
if [ -s "$SHFILE" ] && [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
if [[ -n $DIALOG ]]
then
OVERWRITE=
if [ -w $0 ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
DIALOG_EXIT_CODE=$?
if [[ $DIALOG_EXIT_CODE = 0 ]]; then
OVERWRITE=yes
fi
fi
if [ -z "$OVERWRITE" ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
DIALOG_EXIT_CODE=$?
fi
if [[ $DIALOG_EXIT_CODE = 0 ]]
then
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ "$OVERWRITE" = "yes" ]; then
cp $SHFILE $0
echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
echo "Please re-run the script"
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded as $SHFILE."
echo "Please re-run the script from new location."
fi
exit
else
rm $SHFILE 2>/dev/null
fi
else
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ -w $0 ]; then
echo "The original file $0 will be overwritten!"
echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
cp $SHFILE $0
echo "ALSA-Info script has been updated. Please re-run it."
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded $SHFILE."
echo "Please, re-run it from new location."
fi
exit
fi
else
rm $SHFILE 2>/dev/null
fi
}
cleanup() {
if [ -n "$TEMPDIR" ] && [ "$KEEP_FILES" != "yes" ]; then
rm -rf "$TEMPDIR" 2>/dev/null
fi
test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}
withaplay() {
echo "!!Aplay/Arecord output" >> "$FILE"
echo "!!--------------------" >> "$FILE"
echo "" >> "$FILE"
echo "APLAY" >> "$FILE"
echo "" >> "$FILE"
aplay -l >> "$FILE" 2>&1
echo "" >> "$FILE"
echo "ARECORD" >> "$FILE"
echo "" >> "$FILE"
arecord -l >> "$FILE" 2>&1
echo "" >> "$FILE"
}
withmodules() {
echo "!!All Loaded Modules" >> "$FILE"
echo "!!------------------" >> "$FILE"
echo "" >> "$FILE"
awk '{print $1}' < /proc/modules | sort >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
}
withamixer() {
echo "!!Amixer output" >> "$FILE"
echo "!!-------------" >> "$FILE"
echo "" >> "$FILE"
for f in /proc/asound/card*/id; do
[ -f "$f" ] && read -r CARD_NAME < "$f" || continue
echo "!!-------Mixer controls for card $CARD_NAME" >> "$FILE"
echo "" >> "$FILE"
amixer -c "$CARD_NAME" info >> "$FILE" 2>&1
amixer -c "$CARD_NAME" >> "$FILE" 2>&1
echo "" >> "$FILE"
done
echo "" >> "$FILE"
}
withalsactl() {
echo "!!Alsactl output" >> "$FILE"
echo "!!--------------" >> "$FILE"
echo "" >> "$FILE"
alsactl -f "$TEMPDIR/alsactl.tmp" store
echo "--startcollapse--" >> "$FILE"
cat "$TEMPDIR/alsactl.tmp" >> "$FILE"
echo "--endcollapse--" >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
}
withdevices() {
echo "!!ALSA Device nodes" >> "$FILE"
echo "!!-----------------" >> "$FILE"
echo "" >> "$FILE"
ls -la /dev/snd/* >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
}
withconfigs() {
if [[ -e "$HOME/.asoundrc" ]] || [[ -e "/etc/asound.conf" ]] || [[ -e "$HOME/.asoundrc.asoundconf" ]]; then
echo "!!ALSA configuration files" >> "$FILE"
echo "!!------------------------" >> "$FILE"
echo "" >> "$FILE"
#Check for ~/.asoundrc
if [[ -e "$HOME/.asoundrc" ]]
then
echo "!!User specific config file (~/.asoundrc)" >> "$FILE"
echo "" >> "$FILE"
cat "$HOME/.asoundrc" >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
fi
#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
if [[ -e "$HOME/.asoundrc.asoundconf" ]]
then
echo "!!asoundconf-generated config file" >> "$FILE"
echo "" >> "$FILE"
cat "$HOME/.asoundrc.asoundconf" >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> "$FILE"
echo "" >> "$FILE"
cat /etc/asound.conf >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
fi
fi
}
withsysfs() {
local i f
local printed=""
for i in /sys/class/sound/*; do
case "$i" in
*/hwC?D?)
if [ -f "$i/init_pin_configs" ]; then
if [ -z "$printed" ]; then
echo "!!Sysfs Files" >> "$FILE"
echo "!!-----------" >> "$FILE"
echo "" >> "$FILE"
fi
for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
echo "$i/$f:" >> "$FILE"
cat "$i/$f" >> "$FILE"
echo >> "$FILE"
done
printed=yes
fi
;;
esac
done
if [ -n "$printed" ]; then
echo "" >> "$FILE"
fi
}
withdmesg() {
echo "!!ALSA/HDA dmesg" >> "$FILE"
echo "!!--------------" >> "$FILE"
echo "" >> "$FILE"
dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|audio|hda.codec|hda.intel' >> "$FILE"
echo "" >> "$FILE"
echo "" >> "$FILE"
}
withpackages() {
local RPM
local DPKG
RPM="$(command -v rpmquery)"
DPKG="$(command -v dpkg)"
[ -n "$RPM$DPKG" ] || return
local PATTERN='(alsa-(lib|oss|plugins|tools|(topology|ucm)-conf|utils|sof-firmware)|libalsa|tinycompress|sof-firmware)'
{
echo "!!Packages installed"
echo "!!--------------------"
echo ""
{
if [ -x "$RPM" ]; then "$RPM" -a; fi
if [ -x "$DPKG" ]; then "$DPKG" -l; fi
} | grep -E "$PATTERN"
echo ""
} >> "$FILE"
}
withall() {
withdevices
withconfigs
withaplay
withamixer
withalsactl
withmodules
withsysfs
withdmesg
withpackages
WITHALL=no
}
get_alsa_library_version() {
ALSA_LIB_VERSION="$(grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null | awk '{ print $3 }' | sed 's/"//g')"
if [ -z "$ALSA_LIB_VERSION" ]; then
if [ -f /etc/lsb-release ]; then
. /etc/lsb-release
case "$DISTRIB_ID" in
Ubuntu)
if command -v dpkg > /dev/null ; then
ALSA_LIB_VERSION="$(dpkg -l libasound2 | tail -1 | awk '{ print $3 }' | cut -f 1 -d -)"
fi
if [ "$ALSA_LIB_VERSION" = '<none>' ]; then
ALSA_LIB_VERSION=""
fi
return
;;
*)
return
;;
esac
elif [ -f /etc/debian_version ]; then
if command -v dpkg > /dev/null ; then
ALSA_LIB_VERSION="$(dpkg -l libasound2 | tail -1 | awk '{ print $3 }' | cut -f 1 -d -)"
fi
if [ "$ALSA_LIB_VERSION" = '<none>' ]; then
ALSA_LIB_VERSION=""
fi
return
fi
fi
}
# Basic requires
for prg in "${REQUIRES[@]}"; do
t="$(command -v "$prg")"
if test -z "$t"; then
echo "This script requires $prg utility to continue."
exit 1
fi
done
# Run checks to make sure the programs we need are installed.
LSPCI="$(command -v lspci)"
TPUT="$(command -v tput)"
DIALOG="$(command -v dialog)"
# Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS="$(mount | grep sysfs | awk '{ print $3 }')"
# Check modprobe config files for sound related options
SNDOPTIONS="$(modprobe -c | sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')"
KEEP_OUTPUT=
NFILE=""
PASTEBIN=""
WWWSERVICE='www.alsa-project.org'
WELCOME=yes
PROCEED=yes
UPLOAD=ask
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT=no
case "$1" in
--update|--help|--about)
WELCOME=no
PROCEED=no
;;
--upload)
UPLOAD=yes
WELCOME=no
;;
--no-upload)
UPLOAD=no
WELCOME=no
;;
--pastebin)
PASTEBIN=yes
WWWSERVICE=pastebin
;;
--no-dialog)
DIALOG=""
REPEAT=""
shift
;;
--stdout)
DIALOG=""
WELCOME=no
;;
esac
done
#Script header output.
if [ "$WELCOME" = yes ]; then
greeting_message="\
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
aplay
amixer
alsactl
rpm, dpkg
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See '$0 --help' for command line options.
"
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" \
--title "ALSA-Info script v $SCRIPT_VERSION" \
--msgbox "$greeting_message" 20 80
else
echo "ALSA Information Script v $SCRIPT_VERSION"
echo "--------------------------------"
echo "$greeting_message"
fi # dialog
fi # WELCOME
# Set the output file
TEMPDIR="$(mktemp -t -d alsa-info.XXXXXXXXXX)" || exit 1
FILE="$TEMPDIR/alsa-info.txt"
if [ -z "$NFILE" ]; then
NFILE="$(mktemp -t alsa-info.txt.XXXXXXXXXX)" || exit 1
fi
trap cleanup 0
if [ "$PROCEED" = yes ]; then
if [ -z "$LSPCI" ]; then
if [ -d /sys/bus/pci ]; then
echo "This script requires lspci. Please install it, and re-run this script."
fi
fi
# Fetch the info and store in temp files/variables
TSTAMP=$(LANG=C TZ=UTC date)
DISTRO=$(grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus\|ALT" /etc/{issue,*release,*version})
read -r KERNEL_RELEASE KERNEL_MACHINE KERNEL_PROCESSOR KERNEL_OS < <(uname -rpmo)
read -r KERNEL_VERSION < <(uname -v)
if [[ "$KERNEL_VERSION" = *SMP* ]]; then KERNEL_SMP=Yes; else KERNEL_SMP=No; fi
ALSA_DRIVER_VERSION=$(cat /proc/asound/version | head -n1 | awk '{ print $7 }' | sed 's/\.$//')
get_alsa_library_version
ALSA_UTILS_VERSION=$(amixer -v | awk '{ print $3 }')
ESDINST=$(command -v esd)
PWINST=$(command -v pipewire)
PAINST=$(command -v pulseaudio)
ARTSINST=$(command -v artsd)
JACKINST=$(command -v jackd)
JACK2INST=$(command -v jackdbus)
ROARINST=$(command -v roard)
DMIDECODE=$(command -v dmidecode)
#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
# No root privileges are required when using sysfs method
DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
DMI_SYSTEM_SKU=$(cat /sys/class/dmi/id/product_sku 2>/dev/null)
DMI_BOARD_VENDOR=$(cat /sys/class/dmi/id/board_vendor 2>/dev/null)
DMI_BOARD_NAME=$(cat /sys/class/dmi/id/board_name 2>/dev/null)
elif [ -x $DMIDECODE ]; then
DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
DMI_SYSTEM_SKU=$($DMIDECODE -s system-sku-number 2>/dev/null)
DMI_BOARD_VENDOR=$($DMIDECODE -s baseboard-manufacturer 2>/dev/null)
DMI_BOARD_NAME=$($DMIDECODE -s baseboard-product-name 2>/dev/null)
fi
# Check for ACPI device status
if [ -d /sys/bus/acpi/devices ]; then
for f in /sys/bus/acpi/devices/*/status; do
ACPI_STATUS=$(cat $f 2>/dev/null);
if [[ "$ACPI_STATUS" -ne 0 ]]; then
echo $f $'\t' $ACPI_STATUS >>$TEMPDIR/acpidevicestatus.tmp;
fi
done
fi
# Check for SoundWire ACPI _adr device status
if [ -d /sys/bus/acpi/devices ]; then
for f in /sys/bus/acpi/devices/*/adr; do
ACPI_ADR=$(cat $f 2>/dev/null);
if [[ "$ACPI_ADR" -ne 0 ]]; then
case $ACPI_ADR in
0x??????025d*) echo "Realtek $ACPI_ADR" >>$TEMPDIR/sdwstatus.tmp;;
0x??????01fa*) echo "Cirrus Logic $ACPI_ADR" >>$TEMPDIR/sdwstatus.tmp;;
0x??????0102*) echo "TI $ACPI_ADR" >>$TEMPDIR/sdwstatus.tmp;;
esac
fi
done
fi
awk '{ print $2 " (card " $1 ")" }' < /proc/asound/modules > $TEMPDIR/alsamodules.tmp 2> /dev/null
cat /proc/asound/cards > $TEMPDIR/alsacards.tmp
if [[ ! -z "$LSPCI" ]]; then
for class in 0401 0402 0403; do
lspci -vvnn -d "::$class" | sed -n '/^[^\t]/,+1p'
done > $TEMPDIR/lspci.tmp
fi
#Check for HDA-Intel cards codec#*
cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null
#Check for AC97 cards codec
cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null
#Check for USB descriptors
if [ -x /usr/bin/lsusb ]; then
for f in /proc/asound/card[0-9]*/usbbus; do
test -f "$f" || continue
id=$(sed 's@/@:@' $f)
lsusb -v -s $id >> $TEMPDIR/lsusb.tmp 2> /dev/null
done
fi
#Check for USB stream setup
cat /proc/asound/card*/stream[0-9]* > $TEMPDIR/alsa-usbstream.tmp 2> /dev/null
#Check for USB mixer setup
cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null
#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=true&script=true&cardinfo=" > $FILE
else
echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
fi
echo "!!################################" >> $FILE
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!################################" >> $FILE
echo "" >> $FILE
echo "!!Script ran on: $TSTAMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer: $DMI_SYSTEM_MANUFACTURER" >> $FILE
echo "Product Name: $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
echo "Product Version: $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
echo "Firmware Version: $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
echo "System SKU: $DMI_SYSTEM_SKU" >> $FILE
echo "Board Vendor: $DMI_BOARD_VENDOR" >> $FILE
echo "Board Name: $DMI_BOARD_NAME" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ACPI Device Status Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/acpidevicestatus.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ACPI SoundWire Device Status Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/sdwstatus.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo "Kernel release: $KERNEL_VERSION" >> $FILE
echo "Operating System: $KERNEL_OS" >> $FILE
echo "Architecture: $KERNEL_MACHINE" >> $FILE
echo "Processor: $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled: $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version: $ALSA_DRIVER_VERSION" >> $FILE
echo "Library version: $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version: $ALSA_UTILS_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!-------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsamodules.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----------------------------" >> $FILE
echo "" >> $FILE
if [[ -n $PWINST ]];then
[[ $(pgrep '^(.*/)?pipewire$') ]] && PWRUNNING="Yes" || PWRUNNING="No"
echo "PipeWire:" >> $FILE
echo " Installed - Yes ($PWINST)" >> $FILE
echo " Running - $PWRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $PAINST ]];then
[[ $(pgrep '^(.*/)?pulseaudio$') ]] && PARUNNING="Yes" || PARUNNING="No"
echo "Pulseaudio:" >> $FILE
echo " Installed - Yes ($PAINST)" >> $FILE
echo " Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ $(pgrep '^(.*/)?esd$') ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo " Installed - Yes ($ESDINST)" >> $FILE
echo " Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ $(pgrep '^(.*/)?artsd$') ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo " Installed - Yes ($ARTSINST)" >> $FILE
echo " Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ $(pgrep '^(.*/)?jackd$') ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo " Installed - Yes ($JACKINST)" >> $FILE
echo " Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACK2INST ]];then
[[ $(pgrep '^(.*/)?jackdbus$') ]] && JACK2RUNNING="Yes" || JACK2RUNNING="No"
echo "Jack2:" >> $FILE
echo " Installed - Yes ($JACK2INST)" >> $FILE
echo " Running - $JACK2RUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ROARINST ]];then
[[ $(pgrep '^(.*/)?roard$') ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
echo "RoarAudio:" >> $FILE
echo " Installed - Yes ($ROARINST)" >> $FILE
echo " Running - $ROARRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!-----------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsacards.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
if [[ ! -z "$LSPCI" ]]; then
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!--------------------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ "$SNDOPTIONS" ]; then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!--------------------------------" >> $FILE
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -d "$SYSFS" ]; then
echo "!!Loaded sound module options" >> $FILE
echo "!!---------------------------" >> $FILE
echo "" >> $FILE
for mod in $(cat /proc/asound/modules | awk '{ print $2 }'); do
echo "!!Module: $mod" >> $FILE
for params in $(echo $SYSFS/module/$mod/parameters/*); do
echo -ne "\t"
value=$(cat $params)
echo "$params : $value" | sed 's:.*/::'
done >> $FILE
echo "" >> $FILE
done
echo "" >> $FILE
echo "!!Sysfs card info" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
for cdir in $(echo $SYSFS/class/sound/card*); do
echo "!!Card: $cdir" >> $FILE
driver=$(readlink -f "$cdir/device/driver")
echo "Driver: $driver" >> $FILE
echo "Tree:" >> $FILE
tree --noreport $cdir -L 2 | sed -e 's/^/\t/g' >> $FILE
echo "" >> $FILE
done
echo "" >> $FILE
if [ -d $SYSFS/class/sound/ctl-led ]; then
echo "!!Sysfs ctl-led info" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
for path in $(echo $SYSFS/class/sound/ctl-led/[ms][ip]*/card*); do
echo "!!CTL-LED: $path" >> $FILE
if [ -r "$path/list" ]; then
list=$(cat "$path/list")
echo "List: $list" >> $FILE
fi
#echo "Tree:" >> $FILE
#tree --noreport $path -L 2 | sed -e 's/^/\t/g' >> $FILE
echo "" >> $FILE
done
fi
fi
if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
echo "!!HDA-Intel Codec information" >> $FILE
echo "!!---------------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
echo "!!AC97 Codec information" >> $FILE
echo "!!----------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97.tmp >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/lsusb.tmp" ]; then
echo "!!USB Descriptors" >> $FILE
echo "!!---------------" >> $FILE
echo "--startcollapse--" >> $FILE
cat $TEMPDIR/lsusb.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-usbstream.tmp" ]; then
echo "!!USB Stream information" >> $FILE
echo "!!----------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-usbstream.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
echo "!!USB Mixer information" >> $FILE
echo "!!---------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#If no command line options are specified, then run as though --with-all was specified
if [ -z "$1" ]; then
update
fi
fi # proceed
#loop through command line arguments, until none are left.
if [ -n "$1" ]; then
until [ -z "$1" ]
do
case "$1" in
--pastebin)
update
;;
--update)
update
exit
;;
--upload)
UPLOAD=yes
;;
--no-upload)
UPLOAD=no
;;
--output)
shift
NFILE="$1"
KEEP_OUTPUT=yes
;;
--debug)
echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
KEEP_FILES=yes
echo ""
;;
--with-all)
withall
;;
--with-aplay)
withaplay
WITHALL=no
;;
--with-amixer)
withamixer
WITHALL=no
;;
--with-alsactl)
withalsactl
WITHALL=no
;;
--with-devices)
withdevices
WITHALL=no
;;
--with-dmesg)
withdmesg
WITHALL=no
;;
--with-configs)
withconfigs
WITHALL=no
;;
--with-packages)
withpackages
WITHALL=no
;;
--stdout)
UPLOAD=no
if [ -z "$WITHALL" ]; then
withall
fi
cat "$FILE"
rm "$FILE"
exit
;;
--about)
echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
echo ""
echo " wishie - Script author and developer / Testing"
echo " crimsun - Various script ideas / Testing"
echo " gnubien - Various script ideas / Testing"
echo " GrueMaster - HDA Intel specific items / Testing"
echo " olegfink - Script update function"
echo " TheMuso - display to stdout functionality"
exit 0
;;
*)
echo "alsa-info.sh version $SCRIPT_VERSION"
echo ""
echo "Available options:"
echo " --with-aplay (includes the output of aplay -l)"
echo " --with-amixer (includes the output of amixer)"
echo " --with-alsactl (includes the output of alsactl)"
echo " --with-configs (includes the output of ~/.asoundrc and"
echo " /etc/asound.conf if they exist)"
echo " --with-devices (shows the device nodes in /dev/snd/)"
echo " --with-dmesg (shows the ALSA/HDA kernel messages)"
echo " --with-packages (includes known packages installed)"
echo ""
echo " --output FILE (specify the file to output for no-upload mode)"
echo " --update (check server for script updates)"
echo " --upload (upload contents to remote server)"
echo " --no-upload (do not upload contents to remote server)"
echo " --pastebin (use 'https://pastebin.ca') as remote server"
echo " instead www.alsa-project.org"
echo " --stdout (print alsa information to standard output"
echo " instead of a file)"
echo " --about (show some information about the script)"
echo " --debug (will run the script as normal, but will not"
echo " delete ${FILE})"
exit 0
;;
esac
shift 1
done
fi
if [ "$PROCEED" = no ]; then
exit 1
fi
if [ -z "$WITHALL" ]; then
withall
fi
# Check if wget is installed, and supports --post-file.
if ! wget --help 2>/dev/null | grep -q post-file; then
# We couldn't find a suitable wget. If --upload was passed, tell the user to upload manually.
if [ "$UPLOAD" != yes ]; then
:
elif [ -n "$DIALOG" ]; then
if [ -z "$PASTEBIN" ]; then
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to 'https://www.alsa-project.org'.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to 'https://www.alsa-project.org/cardinfo-db' and submit your post." 25 100
else
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to 'https://www.pastebin.ca'.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to 'https://www.pastebin.ca/upload.php' and submit your post." 25 100
fi
else
if [ -z "$PASTEBIN" ]; then
echo ""
echo "Could not automatically upload output to 'https://www.alsa-project.org'"
echo "Possible reasons are:"
echo " 1. Couldn't find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to 'https://www.alsa-project.org/cardinfo-db' and submit your post."
echo ""
else
echo ""
echo "Could not automatically upload output to 'https://www.pastebin.ca'"
echo "Possible reasons are:"
echo " 1. Couldn't find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to 'https://www.pastebin.ca/upload.php' and submit your post."
echo ""
fi
fi
UPLOAD=no
fi
if [ "$UPLOAD" = ask ]; then
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
DIALOG_EXIT_CODE="$?"
if [ "$DIALOG_EXIT_CODE" != 0 ]; then
UPLOAD=no
else
UPLOAD=yes
fi
else
echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
read -e CONFIRM
if [ "$CONFIRM" != y ]; then
UPLOAD=no
else
UPLOAD=yes
fi
fi
fi
if [ "$UPLOAD" = no ]; then
mv -f "$FILE" "$NFILE" || exit 1
KEEP_OUTPUT=yes
if [[ -n "$DIALOG" ]]
then
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
else
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
fi
exit
fi # UPLOAD
if [[ -n "$DIALOG" ]]
then
dialog --backtitle "$BGTITLE" --infobox "Uploading information to $WWWSERVICE ..." 6 70
else
echo -n "Uploading information to $WWWSERVICE ..."
fi
if [[ -z "$PASTEBIN" ]]; then
wget -O - --tries=5 --timeout=60 --post-file="$FILE" 'https://www.alsa-project.org/cardinfo-db/' &> "$TEMPDIR/wget.tmp"
else
wget -O - --tries=5 --timeout=60 --post-file="$FILE" 'https://pastebin.ca/quiet-paste.php?api='"${PASTEBINKEY}"'&encrypt=t&encryptpw=blahblah' &> "$TEMPDIR/wget.tmp"
fi
if [ "$?" -ne 0 ]; then
mv -f "$FILE" "$NFILE" || exit 1
KEEP_OUTPUT=yes
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" --title "Information not uploaded" --msgbox "An error occurred while contacting $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
else
echo ""
echo "An error occurred while contacting $WWWSERVICE."
echo "Your information was NOT automatically uploaded."
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
fi
exit
fi
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100
DIALOG_EXIT_CODE="$?"
if [ "$DIALOG_EXIT_CODE" = 0 ]; then
grep -v alsa-info.txt "$FILE" > "$TEMPDIR/uploaded.txt"
dialog --backtitle "$BGTITLE" --textbox "$TEMPDIR/uploaded.txt" 0 0
fi
clear
# no dialog
else
echo -e " Done!"
echo ""
fi # dialog
if [ -z "$PASTEBIN" ]; then
FINAL_URL="$(grep 'SUCCESS:' "$TEMPDIR/wget.tmp" | cut -d ' ' -f 2)"
else
FINAL_URL="$(grep 'SUCCESS:' "$TEMPDIR/wget.tmp" | sed -n 's/.*\:\([0-9]\+\).*/https:\/\/pastebin.ca\/\1/p')"
fi
# See if tput is available, and use it if it is.
if [ -x "$TPUT" ]; then
FINAL_URL="$(tput setaf 1; printf '%s' "$FINAL_URL"; tput sgr0)"
fi
# Output the URL of the uploaded file.
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""