android_device_motorola_guamp/gps/apdr.conf
GarfieldFernando eddf6fbda6 guamp: Initial device tree
- Initial device tree for guamp device
- Based in Qualcomm SM6115

Signed-off-by: GarfieldFernando <ferchito.zoma@gmail.com>
2021-01-18 15:03:21 -06:00

205 lines
5.7 KiB
Text

# AP DR SENSOR Configuration file
#
# SENSOR_SERVICE options are one of below
# accel,gyro,vehicle_accel,vehicle_gyro,pedometer,vehicle_odometry,accel_temp,
# gyro_temp,baro,mag_calib,mag_uncalib,amd,rmd.
#
# SENSOR_PROVIDER options is one of -- default,native,ssc,samlite.
#
# SENSOR_RATE = 1~100 (Hz)
#
# SENSOR_SAMPLES = 1~N
#
# SENSOR_STATISTIC_ENABLED
# bit 0: Diag Print Enabled
# bit 1: Adb Print Enabled
# SENSOR_STATISTIC_PRINT_COUNT
# Skip Number of Print
#
# QDR_DYNAMIC_LOADING = 1~3
# Configure QDR library to be loaded
# 1: QDR3
# 2: QDR2-GYRO
# 3: QDR2-DWT
#
#
######################################
# #
# Default Configuration #
# (GNSS only,QDR Disabled) #
# #
# For QDR enablement, comment #
# this section and enabled #
# either QDR3 OR #
# QDR2-DWT OR QDR2-Gyro related #
# configuration section in below. #
# #
######################################
SENSOR_SERVICE = accel
SENSOR_PROVIDER = native
SENSOR_RATE = 100
SENSOR_SAMPLES = 1
SENSOR_SERVICE = gyro
SENSOR_PROVIDER = native
SENSOR_RATE = 100
SENSOR_SAMPLES = 1
SENSOR_SERVICE = vehicle_gear
SENSOR_PROVIDER = native
SENSOR_RATE = 100
SENSOR_SAMPLES = 1
######################################
# #
# QDR3 Configuration #
# #
# For QDR3, #
# comment default configuration above#
# and #
# uncomment below configuration #
# settings. #
# #
######################################
#
#SENSOR_SERVICE = accel
#SENSOR_PROVIDER = native
#SENSOR_RATE = 10
#SENSOR_SAMPLES = 10
#
#SENSOR_SERVICE = vehicle_speed
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#
#SENSOR_SERVICE = gyro
#SENSOR_PROVIDER = native
#SENSOR_RATE = 10
#SENSOR_SAMPLES = 10
#
#SENSOR_SERVICE = vehicle_gear
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#
#
##Enable/disable sensor data flashback feature
#QDR_FLASHBACK_ENABLED = 0
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
#QDR_DYNAMIC_LOADING = 1
##Enable/disable sensor data batching feature
#QDR_BATCHING_ENABLED = 2
##Reporting offset before PPS boundary
#QDR_REPORTING_OFFSET = 0
##Sensor dispatch threshold declaration
#QDR_SENSDISPATCH_MS = 30
#
######################################
# #
# QDR2-DWT Configuration #
# #
# For QDR2-DWT, #
# comment default configuration above#
# and #
# uncomment below configuration #
# settings. #
# #
######################################
#
#SENSOR_SERVICE = vehicle_speed
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#SENSOR_STATISTIC_ENABLED = 3
#SENSOR_STATISTIC_PRINT_COUNT = 50
#
#SENSOR_SERVICE = vehicle_dws
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#SENSOR_STATISTIC_ENABLED = 3
#SENSOR_STATISTIC_PRINT_COUNT = 50
#
#SENSOR_SERVICE = vehicle_gear
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#SENSOR_STATISTIC_ENABLED = 3
#SENSOR_STATISTIC_PRINT_COUNT = 50
#
#GNSS_POS_STATISTIC_ENABLED = 3
#GNSS_POS_STATISTIC_PRNTCNT = 10
#GNSS_MSR_STATISTIC_ENABLED = 3
#GNSS_MSR_STATISTIC_PRNTCNT = 10
#
##Enable/disable sensor data flashback feature
#QDR_FLASHBACK_ENABLED = 0
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
#QDR_DYNAMIC_LOADING = 3
##Enable/disable sensor data batching feature
#QDR_BATCHING_ENABLED = 0
##Reporting offset before PPS boundary
#QDR_REPORTING_OFFSET = 0
##Sensor dispatch threshold declaration
#QDR_SENSDISPATCH_MS = 30
##QDR_ENABLE_QG shall be set as 1
#QDR_ENABLE_QG = 1
##Select Wheel set (E.g.: Front two wheels, Rear two wheels OR All four wheels)
##To be used for differential wheel tick OR speed service.
##This configuration is applicable when QDR_CAN_TYPE configured as
##ODO_DWS(3) or ODO_DWT(2).
##Value "0": Use Front two wheels
##Value "1": Use Rear two wheels
##Value "2": Use All four wheels
#QG_DRIVE_WHEEL_FW_RW_AW = 2
##Max Wheel tick value above which wheel tick rolls over
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
#QG_DWT_MAX_WHEEL_TICK_COUNT = 255.0
##Configure Wheel constant for DWT based below equation
##(2 * pi * WHEEL_RADIUS / Pulses Per revolution)
##This configuration is applicable when QDR_CAN_TYPE configured as ODO_DWT(2)
#QG_DWT_WHEEL_CONSTANT = 0.044
######################################
# #
# QDR2-GYRO Configuration #
# #
# For QDR2-GYRO, #
# comment default configuration above#
# and #
# uncomment below configuration #
# settings. #
# #
######################################
#
#SENSOR_SERVICE = vehicle_speed
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#
#SENSOR_SERVICE = vehicle_gyro
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#
#SENSOR_SERVICE = vehicle_gear
#SENSOR_PROVIDER = native
#SENSOR_RATE = 100
#SENSOR_SAMPLES = 1
#
##Enable/disable sensor data flashback feature
#QDR_FLASHBACK_ENABLED = 0
##Configure QDR library to be loaded 1: QDR3 2: QDR2-GYRO 3: QDR2-DWS
#QDR_DYNAMIC_LOADING = 2
##Enable/disable sensor data batching feature
#QDR_BATCHING_ENABLED = 0
##Reporting offset before PPS boundary
#QDR_REPORTING_OFFSET = 0
##Sensor dispatch threshold declaration
#QDR_SENSDISPATCH_MS = 30
#