asgardius/android_device_motorola_guamp
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_device_motorola_guamp/rootdir/bin/init.qcom.early_boot.sh
GarfieldFernando eddf6fbda6 guamp: Initial device tree 
- Initial device tree for guamp device
- Based in Qualcomm SM6115

Signed-off-by: GarfieldFernando <ferchito.zoma@gmail.com>
2021-01-18 15:03:21 -06:00

540 lines
18 KiB
Bash
Raw Blame History

#! /vendor/bin/sh
# Copyright (c) 2012-2013,2016,2018-2020 The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
export PATH=/vendor/bin
target_type=`getprop ro.hardware.type`
if [ "$target_type" == "automotive" ]; then
cd /sys/devices/system/memory/
n=1
addr=`cat aligned_blocks_addr | cut -d ',' -f $n`
num=`cat aligned_blocks_num | cut -d ',' -f $n`
while [ -n "$addr" ]
do
echo $addr > probe
echo online > memory$num/state
let n++
addr=`cat aligned_blocks_addr | cut -d ',' -f $n`
num=`cat aligned_blocks_num | cut -d ',' -f $n`
done
fi
# Set platform variables
if [ -f /sys/devices/soc0/hw_platform ]; then
soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
else
soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
fi
if [ -f /sys/devices/soc0/soc_id ]; then
soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
else
soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
fi
if [ -f /sys/devices/soc0/platform_version ]; then
soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
else
soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
fi
if [ -f /sys/class/drm/card0-DSI-1/modes ]; then
echo "detect" > /sys/class/drm/card0-DSI-1/status
mode_file=/sys/class/drm/card0-DSI-1/modes
while read line; do
fb_width=${line%%x*};
break;
done < $mode_file
elif [ -f /sys/class/drm/card0-DP-1/modes ]; then
echo "detect" > /sys/class/drm/card0-DP-1/status
is_dp_mode=1
mode_file=/sys/class/drm/card0-DP-1/modes
while read line; do
fb_width=${line%%x*};
break;
done < $mode_file
elif [ -f /sys/class/graphics/fb0/virtual_size ]; then
res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null
fb_width=${res%,*}
fi
log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'"
#For drm based display driver
vbfile=/sys/module/drm/parameters/vblankoffdelay
if [ -w $vbfile ]; then
echo -1 > $vbfile
else
log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist"
fi
function set_density_by_fb() {
#put default density based on width
if [ -z $fb_width ]; then
if [ $is_dp_mode -eq 1 ]; then
return;
fi
setprop vendor.display.lcd_density 320
else
if [ $fb_width -ge 1600 ]; then
setprop vendor.display.lcd_density 640
elif [ $fb_width -ge 1440 ]; then
setprop vendor.display.lcd_density 560
elif [ $fb_width -ge 1080 ]; then
setprop vendor.display.lcd_density 480
elif [ $fb_width -ge 720 ]; then
setprop vendor.display.lcd_density 320 #for 720X1280 resolution
elif [ $fb_width -ge 480 ]; then
setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution
else
setprop vendor.display.lcd_density 160
fi
fi
}
target=`getprop ro.board.platform`
case "$target" in
"msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
case "$soc_hwplatform" in
"FFA" | "SVLTE_FFA")
# linking to surf_keypad_qwerty.kcm.bin instead of surf_keypad_numeric.kcm.bin so that
# the UI keyboard works fine.
ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
;;
"Fluid")
setprop vendor.display.lcd_density 240
setprop qcom.bt.dev_power_class 2
;;
*)
ln -s /system/usr/keychars/surf_keypad_qwerty.kcm.bin /system/usr/keychars/surf_keypad.kcm.bin
;;
esac
;;
"sm6150")
case "$soc_hwplatform" in
"ADP")
setprop vendor.display.lcd_density 160
;;
esac
case "$soc_hwid" in
365|366)
sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
setprop vendor.media.target.version 1
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 2
fi
;;
355|369|377|384)
setprop vendor.chre.enabled 0
;;
*)
esac
;;
"msm8660")
case "$soc_hwplatform" in
"Fluid")
setprop vendor.display.lcd_density 240
;;
"Dragon")
setprop ro.sound.alsa "WM8903"
;;
esac
;;
"msm8960")
# lcd density is write-once. Hence the separate switch case
case "$soc_hwplatform" in
"Liquid")
if [ "$soc_hwver" == "196608" ]; then # version 0x30000 is 3D sku
setprop ro.sf.hwrotation 90
fi
setprop vendor.display.lcd_density 160
;;
"MTP")
setprop vendor.display.lcd_density 240
;;
*)
case "$soc_hwid" in
"109")
setprop vendor.display.lcd_density 160
;;
*)
setprop vendor.display.lcd_density 240
;;
esac
;;
esac
#Set up composition type based on the target
case "$soc_hwid" in
87)
#8960
setprop debug.composition.type dyn
;;
153|154|155|156|157|138)
#8064 V2 PRIME | 8930AB | 8630AB | 8230AB | 8030AB | 8960AB
setprop debug.composition.type c2d
;;
*)
esac
;;
"msm8974")
case "$soc_hwplatform" in
"Liquid")
setprop vendor.display.lcd_density 160
# Liquid do not have hardware navigation keys, so enable
# Android sw navigation bar
setprop ro.hw.nav_keys 0
;;
"Dragon")
setprop vendor.display.lcd_density 240
;;
*)
setprop vendor.display.lcd_density 320
;;
esac
;;
"msm8226")
case "$soc_hwplatform" in
*)
setprop vendor.display.lcd_density 320
;;
esac
;;
"msm8610" | "apq8084" | "mpq8092")
case "$soc_hwplatform" in
*)
setprop vendor.display.lcd_density 240
;;
esac
;;
"apq8084")
case "$soc_hwplatform" in
"Liquid")
setprop vendor.display.lcd_density 320
# Liquid do not have hardware navigation keys, so enable
# Android sw navigation bar
setprop ro.hw.nav_keys 0
;;
"SBC")
setprop vendor.display.lcd_density 200
# SBC do not have hardware navigation keys, so enable
# Android sw navigation bar
setprop qemu.hw.mainkeys 0
;;
*)
setprop vendor.display.lcd_density 480
;;
esac
;;
"msm8996")
case "$soc_hwplatform" in
"Dragon")
setprop vendor.display.lcd_density 240
setprop qemu.hw.mainkeys 0
;;
"ADP")
setprop vendor.display.lcd_density 160
setprop qemu.hw.mainkeys 0
;;
"SBC")
setprop vendor.display.lcd_density 240
setprop qemu.hw.mainkeys 0
;;
*)
setprop vendor.display.lcd_density 560
;;
esac
;;
"msm8937" | "msm8940")
# Set vendor.opengles.version based on chip id.
# MSM8937 and MSM8940 variants supports OpenGLES 3.1
# 196608 is decimal for 0x30000 to report version 3.0
# 196609 is decimal for 0x30001 to report version 3.1
# 196610 is decimal for 0x30002 to report version 3.2
case "$soc_hwid" in
294|295|296|297|298|313|353|354|363|364)
setprop vendor.opengles.version 196610
if [ $soc_hwid = 354 ]
then
setprop vendor.media.target.version 1
log -t BOOT -p i "SDM429 early_boot prop set for: HwID '$soc_hwid'"
fi
;;
303|307|308|309|320)
# Vulkan is not supported for 8917 variants
setprop vendor.opengles.version 196608
setprop persist.graphics.vulkan.disable true
;;
*)
setprop vendor.opengles.version 196608
;;
esac
;;
"msm8909")
case "$soc_hwplatform" in
*)
setprop persist.graphics.vulkan.disable true
;;
esac
;;
"msm8998" | "apq8098_latv")
case "$soc_hwplatform" in
*)
setprop vendor.display.lcd_density 560
;;
esac
;;
"qcs605")
case "$soc_hwplatform" in
*)
setprop vendor.display.lcd_density 640
;;
esac
;;
"sdm845")
case "$soc_hwplatform" in
*)
if [ $fb_width -le 1600 ]; then
setprop vendor.display.lcd_density 560
else
setprop vendor.display.lcd_density 640
fi
;;
esac
;;
"msmnile")
case "$soc_hwplatform" in
*)
if [ $fb_width -le 1600 ]; then
setprop vendor.display.lcd_density 560
else
setprop vendor.display.lcd_density 640
fi
;;
esac
;;
"kona")
case "$soc_hwplatform" in
*)
if [ $fb_width -le 1600 ]; then
setprop vendor.display.lcd_density 560
else
setprop vendor.display.lcd_density 640
fi
;;
esac
;;
"lito")
case "$soc_hwid" in
400|440)
sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 1
fi
;;
434|459)
sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
setprop vendor.media.target.version 2
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 3
fi
;;
esac
;;
"bengal")
case "$soc_hwid" in
441)
# 441 is for scuba
setprop vendor.fastrpc.disable.cdsprpcd.daemon 1
setprop vendor.media.target.version 2
setprop vendor.gralloc.disable_ubwc 1
# 196609 is decimal for 0x30001 to report version 3.1
setprop vendor.opengles.version 196609
sku_ver=`cat /sys/devices/platform/soc/5a00000.qcom,vidc1/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 3
fi
;;
471)
#scuba APQ
setprop vendor.fastrpc.disable.cdsprpcd.daemon 1
setprop vendor.gralloc.disable_ubwc 1
;;
*)
# default case is for bengal
setprop vendor.opengles.version 196610
sku_ver=`cat /sys/devices/platform/soc/5a00000.qcom,vidc/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 1
fi
;;
esac
;;
"sdm710" | "msmpeafowl")
case "$soc_hwplatform" in
*)
sku_ver=`cat /sys/devices/platform/soc/aa00000.qcom,vidc1/sku_version` 2> /dev/null
if [ $sku_ver -eq 1 ]; then
setprop vendor.media.target.version 1
fi
;;
esac
;;
"msm8953")
cap_ver = 1
if [ -e "/sys/devices/platform/soc/1d00000.qcom,vidc/capability_version" ]; then
cap_ver=`cat /sys/devices/platform/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null
else
cap_ver=`cat /sys/devices/soc/1d00000.qcom,vidc/capability_version` 2> /dev/null
fi
if [ $cap_ver -eq 1 ]; then
setprop vendor.media.target.version 1
fi
;;
#Set property to differentiate SDM660 & SDM455
#SOC ID for SDM455 is 385
"sdm660")
case "$soc_hwid" in
385)
setprop vendor.media.target.version 1
esac
;;
esac
baseband=`getprop ro.baseband`
#enable atfwd daemon all targets except sda, apq, qcs
case "$baseband" in
"apq" | "sda" | "qcs" )
setprop persist.vendor.radio.atfwd.start false;;
*)
setprop persist.vendor.radio.atfwd.start true;;
esac
#set default lcd density
#Since lcd density has read only
#property, it will not overwrite previous set
#property if any target is setting forcefully.
set_density_by_fb
# set Lilliput LCD density for ADP
product=`getprop ro.build.product`
case "$product" in
"msmnile_au")
setprop vendor.display.lcd_density 160
echo 902400000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq
echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/max_freq
echo 902400000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq
echo 1612800000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/max_freq
;;
*)
;;
esac
case "$product" in
"sm6150_au")
setprop vendor.display.lcd_density 160
;;
*)
;;
esac
case "$product" in
"sdmshrike_au")
setprop vendor.display.lcd_density 160
echo 940800000 > /sys/class/devfreq/soc:qcom,cpu0-cpu-l3-lat/min_freq
echo 940800000 > /sys/class/devfreq/soc:qcom,cpu4-cpu-l3-lat/min_freq
;;
*)
;;
esac
case "$product" in
"msmnile_gvmq")
setprop vendor.display.lcd_density 160
;;
*)
;;
esac
# Setup display nodes & permissions
# HDMI can be fb1 or fb2
# Loop through the sysfs nodes and determine
# the HDMI(dtv panel)
function set_perms() {
#Usage set_perms <filename> <ownership> <permission>
chown -h $2 $1
chmod $3 $1
}
# check for the type of driver FB or DRM
fb_driver=/sys/class/graphics/fb0
if [ -e "$fb_driver" ]
then
# check for mdp caps
file=/sys/class/graphics/fb0/mdp/caps
if [ -f "$file" ]
then
setprop vendor.gralloc.disable_ubwc 1
cat $file | while read line; do
case "$line" in
*"ubwc"*)
setprop vendor.gralloc.enable_fb_ubwc 1
setprop vendor.gralloc.disable_ubwc 0
esac
done
fi
fi
drm_driver=/sys/class/drm/card0
if [ -e "$drm_driver" ]; then
set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660
fi
# allow system_graphics group to access pmic secure_mode node
set_perms /sys/class/lcd_bias/secure_mode system.graphics 0660
set_perms /sys/class/leds/wled/secure_mode system.graphics 0660
boot_reason=`cat /proc/sys/kernel/boot_reason`
reboot_reason=`getprop ro.boot.alarmboot`
if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then
setprop ro.vendor.alarm_boot true
else
setprop ro.vendor.alarm_boot false
fi
# copy GPU frequencies to vendor property
if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then
gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null
setprop vendor.gpu.available_frequencies "$gpu_freq"
fi
Reference in a new issue View git blame Copy permalink