android_device_samsung_msm8.../rootdir/bin/init.qcom.early_boot.sh

240 lines
8.4 KiB
Bash
Raw Normal View History

#! /vendor/bin/sh
# Copyright (c) 2012-2013,2016,2018 The Linux Foundation. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# * Neither the name of The Linux Foundation nor
# the names of its contributors may be used to endorse or promote
# products derived from this software without specific prior written
# permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Set platform variables
if [ -f /sys/devices/soc0/hw_platform ]; then
soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
else
soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
fi
if [ -f /sys/devices/soc0/soc_id ]; then
soc_hwid=`cat /sys/devices/soc0/soc_id` 2> /dev/null
else
soc_hwid=`cat /sys/devices/system/soc/soc0/id` 2> /dev/null
fi
if [ -f /sys/devices/soc0/platform_version ]; then
soc_hwver=`cat /sys/devices/soc0/platform_version` 2> /dev/null
else
soc_hwver=`cat /sys/devices/system/soc/soc0/platform_version` 2> /dev/null
fi
if [ -f /sys/class/drm/card0-DSI-1/modes ]; then
echo "detect" > /sys/class/drm/card0-DSI-1/status
mode_file=/sys/class/drm/card0-DSI-1/modes
while read line; do
fb_width=${line%%x*};
break;
done < $mode_file
elif [ -f /sys/class/graphics/fb0/virtual_size ]; then
res=`cat /sys/class/graphics/fb0/virtual_size` 2> /dev/null
fb_width=${res%,*}
fi
log -t BOOT -p i "MSM target '$1', SoC '$soc_hwplatform', HwID '$soc_hwid', SoC ver '$soc_hwver'"
#For drm based display driver
vbfile=/sys/module/drm/parameters/vblankoffdelay
if [ -w $vbfile ]; then
echo -1 > $vbfile
else
log -t DRM_BOOT -p w "file: '$vbfile' or perms doesn't exist"
fi
function set_density_by_fb() {
#put default density based on width
if [ -z $fb_width ]; then
setprop vendor.display.lcd_density 320
else
if [ $fb_width -ge 1600 ]; then
setprop vendor.display.lcd_density 640
elif [ $fb_width -ge 1440 ]; then
setprop vendor.display.lcd_density 560
elif [ $fb_width -ge 1080 ]; then
setprop vendor.display.lcd_density 480
elif [ $fb_width -ge 720 ]; then
setprop vendor.display.lcd_density 320 #for 720X1280 resolution
elif [ $fb_width -ge 480 ]; then
setprop vendor.display.lcd_density 240 #for 480X854 QRD resolution
else
setprop vendor.display.lcd_density 160
fi
fi
}
target=`getprop ro.board.platform`
case "$target" in
"msm8996")
case "$soc_hwplatform" in
"Dragon")
setprop vendor.display.lcd_density 240
setprop qemu.hw.mainkeys 0
;;
"ADP")
setprop vendor.display.lcd_density 160
setprop qemu.hw.mainkeys 0
;;
"SBC")
setprop vendor.display.lcd_density 240
setprop qemu.hw.mainkeys 0
;;
*)
setprop vendor.display.lcd_density 560
;;
esac
;;
esac
baseband=`getprop ro.baseband`
#enable atfwd daemon all targets except sda, apq, qcs
case "$baseband" in
"apq" | "sda" | "qcs" )
setprop persist.vendor.radio.atfwd.start false;;
*)
setprop persist.vendor.radio.atfwd.start true;;
esac
#set default lcd density
#Since lcd density has read only
#property, it will not overwrite previous set
#property if any target is setting forcefully.
set_density_by_fb
# Setup display nodes & permissions
# HDMI can be fb1 or fb2
# Loop through the sysfs nodes and determine
# the HDMI(dtv panel)
##### moved to init.target.rc (booting performance team)#####
#function set_perms() {
# #Usage set_perms <filename> <ownership> <permission>
# chown -h $2 $1
# chmod $3 $1
#}
#
#function setHDMIPermission() {
# file=/sys/class/graphics/fb$1
# dev_file=/dev/graphics/fb$1
# dev_gfx_hdmi=/devices/virtual/switch/hdmi
#
# set_perms $file/hpd system.graphics 0664
# set_perms $file/res_info system.graphics 0664
# set_perms $file/vendor_name system.graphics 0664
# set_perms $file/product_description system.graphics 0664
# set_perms $file/video_mode system.graphics 0664
# set_perms $file/format_3d system.graphics 0664
# set_perms $file/s3d_mode system.graphics 0664
# set_perms $file/dynamic_fps system.graphics 0664
# set_perms $file/msm_fb_dfps_mode system.graphics 0664
# set_perms $file/hdr_stream system.graphics 0664
# set_perms $file/cec/enable system.graphics 0664
# set_perms $file/cec/logical_addr system.graphics 0664
# set_perms $file/cec/rd_msg system.graphics 0664
# set_perms $file/pa system.graphics 0664
# set_perms $file/cec/wr_msg system.graphics 0600
# set_perms $file/hdcp/tp system.graphics 0664
# set_perms $file/hdcp2p2/min_level_change system.graphics 0660
# set_perms $file/hdmi_audio_cb audioserver.audio 0600
# ln -s $dev_file $dev_gfx_hdmi
#}
# check for the type of driver FB or DRM
fb_driver=/sys/class/graphics/fb0
if [ -e "$fb_driver" ]
then
# # check for HDMI connection
# for fb_cnt in 0 1 2 3
# do
# file=/sys/class/graphics/fb$fb_cnt/msm_fb_panel_info
# if [ -f "$file" ]
# then
# cat $file | while read line; do
# case "$line" in
# *"is_pluggable"*)
# case "$line" in
# *"1"*)
# setHDMIPermission $fb_cnt
# esac
# esac
# done
# fi
# done
# check for mdp caps
file=/sys/class/graphics/fb0/mdp/caps
if [ -f "$file" ]
then
setprop vendor.gralloc.disable_ubwc 1
cat $file | while read line; do
case "$line" in
*"ubwc"*)
setprop vendor.gralloc.enable_fb_ubwc 1
setprop vendor.gralloc.disable_ubwc 0
esac
done
fi
# file=/sys/class/graphics/fb0
# if [ -d "$file" ]
# then
# set_perms $file/idle_time system.graphics 0664
# set_perms $file/dynamic_fps system.graphics 0664
# set_perms $file/dyn_pu system.graphics 0664
# set_perms $file/modes system.graphics 0664
# set_perms $file/mode system.graphics 0664
# set_perms $file/msm_cmd_autorefresh_en system.graphics 0664
# fi
#
# # set lineptr permissions for all displays
# for fb_cnt in 0 1 2 3
# do
# file=/sys/class/graphics/fb$fb_cnt
# if [ -f "$file/lineptr_value" ]; then
# set_perms $file/lineptr_value system.graphics 0664
# fi
# if [ -f "$file/msm_fb_persist_mode" ]; then
# set_perms $file/msm_fb_persist_mode system.graphics 0664
# fi
# done
#else
# set_perms /sys/devices/virtual/hdcp/msm_hdcp/min_level_change system.graphics 0660
fi
boot_reason=`cat /proc/sys/kernel/boot_reason`
reboot_reason=`getprop ro.boot.alarmboot`
if [ "$boot_reason" = "3" ] || [ "$reboot_reason" = "true" ]; then
setprop ro.vendor.alarm_boot true
else
setprop ro.vendor.alarm_boot false
fi
# copy GPU frequencies to vendor property
if [ -f /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies ]; then
gpu_freq=`cat /sys/class/kgsl/kgsl-3d0/gpu_available_frequencies` 2> /dev/null
setprop vendor.gpu.available_frequencies "$gpu_freq"
fi