diff --git a/rootdir/bin/init.qcom.usb.sh b/rootdir/bin/init.qcom.usb.sh
index e69de29..eef0095 100644
--- a/rootdir/bin/init.qcom.usb.sh
+++ b/rootdir/bin/init.qcom.usb.sh
@@ -0,0 +1,277 @@
+#!/vendor/bin/sh
+# Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above
+#       copyright notice, this list of conditions and the following
+#       disclaimer in the documentation and/or other materials provided
+#       with the distribution.
+#     * Neither the name of The Linux Foundation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#      from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#
+
+# Set platform variables
+if [ -f /sys/devices/soc0/hw_platform ]; then
+    soc_hwplatform=`cat /sys/devices/soc0/hw_platform` 2> /dev/null
+else
+    soc_hwplatform=`cat /sys/devices/system/soc/soc0/hw_platform` 2> /dev/null
+fi
+
+if [ -f /sys/devices/soc0/machine ]; then
+    soc_machine=`cat /sys/devices/soc0/machine` 2> /dev/null
+else
+    soc_machine=`cat /sys/devices/system/soc/soc0/machine` 2> /dev/null
+fi
+
+#
+# Check ESOC for external MDM
+#
+# Note: currently only a single MDM is supported
+#
+if [ -d /sys/bus/esoc/devices ]; then
+for f in /sys/bus/esoc/devices/*; do
+    if [ -d $f ]; then
+    if [ `grep -e "^MDM" -e "^SDX" $f/esoc_name` ]; then
+            esoc_link=`cat $f/esoc_link`
+            break
+        fi
+    fi
+done
+fi
+
+target=`getprop ro.board.platform`
+
+# soc_ids for 8937
+if [ -f /sys/devices/soc0/soc_id ]; then
+	soc_id=`cat /sys/devices/soc0/soc_id`
+else
+	soc_id=`cat /sys/devices/system/soc/soc0/id`
+fi
+
+if [ -f /sys/class/android_usb/f_mass_storage/lun/nofua ]; then
+	echo 1  > /sys/class/android_usb/f_mass_storage/lun/nofua
+fi
+
+#
+# Override USB default composition
+#
+# If USB persist config not set, set default configuration
+if [ "$(getprop persist.vendor.usb.config)" == "" -a \
+	"$(getprop init.svc.vendor.usb-gadget-hal-1-0)" != "running" ]; then
+      if [ "$esoc_link" != "" ]; then
+	  setprop persist.vendor.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
+      else
+	  case "$(getprop ro.baseband)" in
+	      "apq")
+	          setprop persist.vendor.usb.config diag,adb
+	      ;;
+	      *)
+	      case "$soc_hwplatform" in
+	          "Dragon" | "SBC")
+	              setprop persist.vendor.usb.config diag,adb
+	          ;;
+                  *)
+		  soc_machine=${soc_machine:0:3}
+		  case "$soc_machine" in
+		    "SDA")
+	              setprop persist.vendor.usb.config diag,adb
+		    ;;
+		    *)
+	            case "$target" in
+	              "msm8996")
+	                  setprop persist.vendor.usb.config diag,serial_cdev,serial_tty,rmnet_ipa,mass_storage,adb
+		      ;;
+	              "msm8909")
+		          setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
+		      ;;
+	              "msm8937")
+			    if [ -d /config/usb_gadget ]; then
+				       setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+			    else
+			               case "$soc_id" in
+				               "313" | "320")
+				                  setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
+				               ;;
+				               *)
+				                  setprop persist.vendor.usb.config diag,serial_smd,rmnet_qti_bam,adb
+				               ;;
+			               esac
+			    fi
+		      ;;
+	              "msm8953")
+			      if [ -d /config/usb_gadget ]; then
+				      setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+			      else
+				      setprop persist.vendor.usb.config diag,serial_smd,rmnet_ipa,adb
+			      fi
+		      ;;
+	              "msm8998" | "sdm660" | "apq8098_latv")
+		          setprop persist.vendor.usb.config diag,serial_cdev,rmnet,adb
+		      ;;
+	              "sdm845" | "sdm710")
+		          setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,adb
+		      ;;
+	              "msmnile" | "sm6150")
+			  setprop persist.vendor.usb.config diag,serial_cdev,rmnet,dpl,qdss,adb
+		      ;;
+	              *)
+		          setprop persist.vendor.usb.config diag,adb
+		      ;;
+                    esac
+		    ;;
+		  esac
+	          ;;
+	      esac
+	      ;;
+	  esac
+      fi
+fi
+
+# set rndis transport to BAM2BAM_IPA for 8920 and 8940
+if [ "$target" == "msm8937" ]; then
+	if [ ! -d /config/usb_gadget ]; then
+	   case "$soc_id" in
+		"313" | "320")
+		   echo BAM2BAM_IPA > /sys/class/android_usb/android0/f_rndis_qc/rndis_transports
+		;;
+		*)
+		;;
+	   esac
+	else
+	   case "$soc_id" in
+		"313" | "320")
+		   setprop vendor.usb.rndis.func.name "rndis_bam"
+		   setprop vendor.usb.rmnet.func.name "rmnet_bam"
+		   setprop vendor.usb.rmnet.inst.name "rmnet"
+		   setprop vendor.usb.dpl.inst.name "dpl"
+		;;
+		*)
+		;;
+	   esac
+	fi
+fi
+
+# set device mode notification to USB driver for SA8150 Auto ADP
+product=`getprop ro.build.product`
+
+case "$product" in
+	"msmnile_au")
+	echo peripheral > /sys/bus/platform/devices/a600000.ssusb/mode
+         ;;
+	*)
+	;;
+esac
+case "$product" in
+	"msmnile_gvmq")
+	echo peripheral > /sys/bus/platform/devices/a600000.ssusb/mode
+         ;;
+	*)
+	;;
+esac
+
+# check configfs is mounted or not
+if [ -d /config/usb_gadget ]; then
+	# Chip-serial is used for unique MSM identification in Product string
+	msm_serial=`cat /sys/devices/soc0/serial_number`;
+	msm_serial_hex=`printf %08X $msm_serial`
+	machine_type=`cat /sys/devices/soc0/machine`
+	product_string="$machine_type-$soc_hwplatform _SN:$msm_serial_hex"
+	echo "$product_string" > /config/usb_gadget/g1/strings/0x409/product
+
+	# ADB requires valid iSerialNumber; if ro.serialno is missing, use dummy
+	serialnumber=`cat /config/usb_gadget/g1/strings/0x409/serialnumber` 2> /dev/null
+	if [ "$serialnumber" == "" ]; then
+		serialno=1234567
+		echo $serialno > /config/usb_gadget/g1/strings/0x409/serialnumber
+	fi
+fi
+
+#
+# Initialize RNDIS Diag option. If unset, set it to 'none'.
+#
+diag_extra=`getprop persist.vendor.usb.config.extra`
+if [ "$diag_extra" == "" ]; then
+	setprop persist.vendor.usb.config.extra none
+fi
+
+# enable rps cpus on msm8937 target
+setprop vendor.usb.rps_mask 0
+case "$soc_id" in
+	"294" | "295" | "353" | "354")
+		setprop vendor.usb.rps_mask 40
+	;;
+esac
+
+#
+# Initialize UVC conifguration.
+#
+if [ -d /config/usb_gadget/g1/functions/uvc.0 ]; then
+	cd /config/usb_gadget/g1/functions/uvc.0
+
+	echo 3072 > streaming_maxpacket
+	echo 1 > streaming_maxburst
+	mkdir control/header/h
+	ln -s control/header/h control/class/fs/
+	ln -s control/header/h control/class/ss
+
+	mkdir -p streaming/uncompressed/u/360p
+	echo "666666\n1000000\n5000000\n" > streaming/uncompressed/u/360p/dwFrameInterval
+
+	mkdir -p streaming/uncompressed/u/720p
+	echo 1280 > streaming/uncompressed/u/720p/wWidth
+	echo 720 > streaming/uncompressed/u/720p/wWidth
+	echo 29491200 > streaming/uncompressed/u/720p/dwMinBitRate
+	echo 29491200 > streaming/uncompressed/u/720p/dwMaxBitRate
+	echo 1843200 > streaming/uncompressed/u/720p/dwMaxVideoFrameBufferSize
+	echo 5000000 > streaming/uncompressed/u/720p/dwDefaultFrameInterval
+	echo "5000000\n" > streaming/uncompressed/u/720p/dwFrameInterval
+
+	mkdir -p streaming/mjpeg/m/360p
+	echo "666666\n1000000\n5000000\n" > streaming/mjpeg/m/360p/dwFrameInterval
+
+	mkdir -p streaming/mjpeg/m/720p
+	echo 1280 > streaming/mjpeg/m/720p/wWidth
+	echo 720 > streaming/mjpeg/m/720p/wWidth
+	echo 29491200 > streaming/mjpeg/m/720p/dwMinBitRate
+	echo 29491200 > streaming/mjpeg/m/720p/dwMaxBitRate
+	echo 1843200 > streaming/mjpeg/m/720p/dwMaxVideoFrameBufferSize
+	echo 5000000 > streaming/mjpeg/m/720p/dwDefaultFrameInterval
+	echo "5000000\n" > streaming/mjpeg/m/720p/dwFrameInterval
+
+	echo 0x04 > /config/usb_gadget/g1/functions/uvc.0/streaming/mjpeg/m/bmaControls
+
+	mkdir -p streaming/h264/h/960p
+	echo 1920 > streaming/h264/h/960p/wWidth
+	echo 960 > streaming/h264/h/960p/wWidth
+	echo 40 > streaming/h264/h/960p/bLevelIDC
+	echo "333667\n" > streaming/h264/h/960p/dwFrameInterval
+
+	mkdir -p streaming/h264/h/1920p
+	echo "333667\n" > streaming/h264/h/1920p/dwFrameInterval
+
+	mkdir streaming/header/h
+	ln -s streaming/uncompressed/u streaming/header/h
+	ln -s streaming/mjpeg/m streaming/header/h
+	ln -s streaming/h264/h streaming/header/h
+	ln -s streaming/header/h streaming/class/fs/
+	ln -s streaming/header/h streaming/class/hs/
+	ln -s streaming/header/h streaming/class/ss/
+fi