From 779f97c5a081aecf1a0e4f320a5ea2cfcc5c74f4 Mon Sep 17 00:00:00 2001 From: Deokgyu Yang Date: Wed, 12 May 2021 22:53:13 +0900 Subject: [PATCH] Remove sensors configurations Signed-off-by: Deokgyu Yang Change-Id: I8867890971a26882a23ed069024c216a22ec34d6 --- configs/sensors/hals.conf | 1 - configs/sensors/sensor_def_qcomdev.conf | 405 ------------------------ device.mk | 5 - 3 files changed, 411 deletions(-) delete mode 100755 configs/sensors/hals.conf delete mode 100644 configs/sensors/sensor_def_qcomdev.conf diff --git a/configs/sensors/hals.conf b/configs/sensors/hals.conf deleted file mode 100755 index 0b323a2..0000000 --- a/configs/sensors/hals.conf +++ /dev/null @@ -1 +0,0 @@ -sensors.ssc.so \ No newline at end of file diff --git a/configs/sensors/sensor_def_qcomdev.conf b/configs/sensors/sensor_def_qcomdev.conf deleted file mode 100644 index a6f58d7..0000000 --- a/configs/sensors/sensor_def_qcomdev.conf +++ /dev/null @@ -1,405 +0,0 @@ -# -# File: sensor_def_qcomdev.conf -# -# Tihs file contains default sensor registry values for Qualcomm development -# test platforms. -# -# Copyright (c) 2013-2015 Qualcomm Technologies, Inc. -# All Rights Reserved. -# Confidential and Proprietary - Qualcomm Technologies, Inc. - - -# File format: -# -# Lines starting with "#" are comments and ignored. -# -# File metadata uses this format: -# :key value1 value2 -# -# The following keys are defined: -# - "version" : value1 is non-zero positive version number of the file. This -# number will be stored in the sensors registry. It should be equal to the -# largest version of any item. It will be saved in the sensors registry for -# later use when initializing values. See the item format below. -# This value should only be specified once in the file. -# -# - "hardware" : The value1 will be compared to the "Hardware" string from -# the property of ro.board.platform. -# Items will only be used as default values in the registry if the hardware -# string value is a substring of the ro.board.platform string. -# This metadata key can be used more than once, so that one file can support -# more than one type of hardware. -# The value may be NULL, indicating common item values for all hardware. -# -# - "platform" : Similar to the "hardware" key, but this string will need to -# match the text of either /sys/devices/soc0/hw_platform or -# /sys/devices/soc0/platform_subtype. -# -# - "soc_id" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/soc_id. -# -# - "subtype" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/platform_subtype. -# -# - "soc_rev" : Similar to the "hardware" key, but this string will need to -# match the text of /sys/devices/soc0/revision. -# -# - "property" : value1 is the Android system property key, and value2 is -# the desired property value. If the system property value matches the -# desired property value, then the following items will be applied. -# This metadata key can be used more than once, in which case the new -# property value overrides the old. -# value1 and 2 may be NULL, indicating common item values for all properties. -# -# Registry items are in lines with the following format: -# -# Where: -# itemID is the numeric item ID defined in sns_reg_api_v02.h -# -# "value" is the numeric value of the item. -# -# "version" is a non-zero version of the item value. -# The version field will be compared against the previous saved -# value in the sensors registry. If this value is greater than the -# saved value, the default will be applied. Otherwise, the default -# will be skipped. -# -# Registry item values will only be applied if the hardware, platform, and -# property values match for the current hardware configuration. -# -# The numeric fields are parsed with the strtoull function, base 0. -# - -# If you update the conf version, you have to update the item version for magnetic calibration. -# 401 ~ 414, 3903, 3904, 3905, 3915 - -:version 0x00010003 - -####################################################################### -### 8996 Chipsets - REV00 -####################################################################### -:hardware msm8996 -:platform -:property -:hw_rev 0 -# Orientation of sensors -# accel x/y/z -700 2 0x00010003 #accel-x-axis -701 -1 0x00010003 #accel-y-axis -702 3 0x00010003 #accel-z-axis -# gyro x/y/z -800 2 0x00010003 #gyro-x-axis -801 -1 0x00010003 #gyro-y-axis -802 3 0x00010003 #gyro-z-axis -# mag x/y/z -900 1 0x00010005 #max-x-axis -901 2 0x00010005 #mag-y-axis -902 3 0x00010005 #mag-z-axis -# SSI SMGR Version -1900 1 0x00010001 #Maj Ver -1901 2 0x00010001 #Min Ver - -# SAM config -# -203 65536 0x10001 # AMD -225 983040 0x10001 # RMD -504 65536 0x10001 # Gyro Cal -1703 65536 0x10001 # Ped -2800 983040 0x10001 # basic ges -2900 983040 0x10001 # Facing -3400 65536 0x10001 # CMC -609 983040 0x10001 # FMV -1005 983040 0x10001 # Grav -1103 983040 0x10001 # orientation -3000 983040 0x10001 # gyro quat -3100 983040 0x10001 # rot vec -3500 983040 0x10001 # game rv -4112 65536 0x10001 # SMD -4103 5 0x10001 # SMD_ACC_WIN_TIME - -#MAG Cal registry -401 0x00000000 0x00010005 # Mag_fac_cal_bias_valid -402 0x00000001 0x00010005 # Mag_fac_cal_matrix_valid -403 0x00006C6C 0x00010005 # X_offset -404 0xFFFFDB8B 0x00010005 # Y_offset -405 0xFFFFF5F2 0x00010005 # Z_offset -406 0x0000E0F2 0x00010007 # Compensation_matrix_0_0 -407 0x0000019D 0x00010007 # Compensation_matrix_0_1 -408 0xFFFFFFC5 0x00010007 # Compensation_matrix_0_2 -409 0xFFFFF7A1 0x00010007 # Compensation_matrix_1_0 -410 0x0000FC5D 0x00010007 # Compensation_matrix_1_1 -411 0x00000803 0x00010007 # Compensation_matrix_1_2 -412 0xFFFFF92A 0x00010007 # Compensation_matrix_2_0 -413 0xFFFFF525 0x00010007 # Compensation_matrix_2_1 -414 0x00010ADB 0x00010007 # Compensation_matrix_2_2 - -#ALS/Proxi registry -100 0x14 0x00010001 #visible_ratio -101 0x50 0x00010001 #ir_ratio -102 0 0x00010001 #dc_offset -103 2000 0x00010002 #thresh_near -104 1400 0x00010002 #thresh_far -105 0 0x00010001 #prx_crosstalk -106 0x356 0x00010001 #als_factor -107 50 0x00010001 #ams_num -108 1 0x00010001 #drv_ID -109 1 0x00010001 #calibratePhone -110 1 0x00010001 #device -111 250 0x00010001 #calLuxLower -112 500 0x00010001 #calLuxUpper -113 3367 0x00010003 #d_factor -114 300 0x00010002 #r_coef -115 1000 0x00010002 #g_coef -116 -10 0x00010002 #b_coef -117 3699 0x00010002 #ct_coef -118 1687 0x00010002 #ct_offset -119 2000 0x00010001 #proxDetect -120 1400 0x00010001 #proxRelease -121 1024 0x00010001 #luxCorrection -122 6 0x00010001 #led enable gpio num -123 0 0x00010001 #cancelation -124 0x000F 0x00010001 #trim - -# sam parameters for BMI160 -200 0x000a0000 0x00010001 #AMD_ACC_SAMP_RATE_HZ_Q16 -201 0x00000cdc 0x00010001 #AMD_INT_cfg_prm1 -202 0x00008000 0x00010001 #AMD_INT_cfg_prm2 -211 0x000010db 0x00010001 #VMD_INT_cfg_prm1 -220 0x001e0000 0x00010001 #RMD_ACC_SAMP_RATE_HZ_Q16 -221 0x0001b333 0x00010001 #RMD_INT_cfg_prm1 -222 0x00003333 0x00010001 #RMD_INT_cfg_prm2 -223 0x00050000 0x00010001 #RMD_INT_cfg_prm3 -224 0x00003333 0x00010001 #RMD_INT_cfg_prm4 - -# LSM6DS3 - accel -# {0xaa,0x2b,0xa9,0x09,0xcb,0xe1,0x46,0x12,0x8e,0x50,0x6c,0x95,0xd5,0xd9,0x0b,0x1a} -1902 0x1246e1cb09a92baa 0x00010001 #UUID -1903 0x1a0bd9d5956c508e 0x00010001 #UUID -1904 100000 0x00010001 #off_to_idle -1905 0 0x00010002 #idle_to_ready -1906 0x1001 0x00010001 #SPI_bus -1907 1000 0x00010001 #reg_group_id -1908 0 0x00010001 #cal_grp_id -1909 122 0x00010001 #gpio1 -1910 0xFFFF 0x00010001 #gpio2 -1911 0 0x00010001 #sensor_id -1912 0x0 0x00010001 #i2c_address // SPI -1913 1 0x00010001 #data_type1 -1914 0 0x00010001 #data_type2 -1915 -1 0x00010001 #rel_sns_idx -1916 1 0x00010004 #sens_default -1917 0xD0 0x00010001 #flags -1982 0 0x00010001 #device_select -1987 0x2 0x00010004 #vdd -1988 0x2 0x00010001 #vddio - -# LSM6DS3 - gyro -# {0xaa,0x2b,0xa9,0x09,0xcb,0xe1,0x46,0x12,0x8e,0x50,0x6c,0x95,0xd5,0xd9,0x0b,0x1a} -1918 0x1246e1cb09a92baa 0x00010001 #UUID -1919 0x1a0bd9d5956c508e 0x00010001 #UUID -1920 100000 0x00010001 #off_to_idle -1921 0 0x00010002 #idle_to_ready -1922 0x1001 0x00010001 #SPI_bus -1923 1010 0x00010001 #reg_group_id -1924 10 0x00010001 #cal_grp_id -1925 122 0x00010001 #gpio1 -1926 0xFFFF 0x00010001 #gpio2 -1927 10 0x00010001 #sensor_id -1928 0x0 0x00010001 #i2c_address // SPI -1929 3 0x00010001 #data_type1 -1930 0 0x00010001 #data_type2 -1931 -1 0x00010001 #rel_sns_idx -1932 2 0x00010004 #sens_default -1933 0xD0 0x00010001 #flags -1983 0 0x00010001 #device_select -1989 0x2 0x00010004 #vdd -1990 0x2 0x00010001 #vddio - -# AKM099xx_FIFO -# {0xf6,0xae,0x80,0xfe,0x94,0x2b,0x4d,0x56, 0x8f,0x16,0x61,0xd5,0x98,0x1b,0x61,0x90} -1934 0x564d2b94fe80aef6 0x00010001 #UUID -1935 0x90611b98d561168f 0x00010001 #UUID -1936 3000 0x00010004 #off_to_idle -1937 10000 0x00010004 #idle_to_ready -1938 3 0x00010001 #i2c_bus -1939 1020 0x00010001 #reg_group_id -1940 0x0014 0x00010002 #cal_grp_id -1941 0xFFFF 0x00010001 #gpio1 -1942 0xFFFF 0x00010001 #gpio2 -1943 20 0x00010001 #sensor_id -1944 0x0C 0x00010001 #i2c_address -1945 2 0x00010001 #data_type1 -1946 0 0x00010001 #data_type2 -1947 0xFF 0x00010001 #rel_sns_idx -1948 0 0x00010001 #sens_default -1949 0 0x00010001 #flags -1984 0 0x00010001 #device_select -1991 0x2 0x00010004 #vdd -1992 0x2 0x00010001 #vddio - -# CM3323 - light -# {0xa9,0xd5,0xce,0xe6,0x42,0xca,0x4e,0xa9,0x9c,0x29,0x7e,0x1a,0xc7,0x9e,0x78,0x4b} -1950 0xa94eca42e6ced5a9 0x00010003 #UUID -1951 0x4b789ec71a7e299c 0x00010003 #UUID -1952 5000 0x00010003 #off_to_idle -1953 150000 0x00010003 #idle_to_ready -1954 2 0x00010003 #i2c_bus -1955 1040 0x00010003 #reg_group_id -1956 0xFFFF 0x00010003 #cal_grp_id -1957 0xFFFF 0x00010003 #gpio1 -1958 0xFFFF 0x00010003 #gpio2 -1959 40 0x00010003 #sensor_id -1960 0x10 0x00010003 #i2c_address -1961 0 0x00010003 #data_type1 -1962 6 0x00010003 #data_type2 -1963 0xFF 0x00010003 #rel_sns_idx -1964 0 0x00010003 #sens_default -1965 0x80 0x00010004 #flags -1985 0 0x00010003 #device_select -1993 0x96 0x00010004 #vdd -1994 0x96 0x00010004 #vddio - -# SSI SMGR Cfg 4: -# {0xbc,0x46,0xfd,0x1b,0x43,0xb8,0x25,0x0b,0x61,0xc6,0x95,0x37,0x96,0x75,0x40,0xc1} -1966 0 0x00010003 #UUID low -1967 0 0x00010003 #UUID high -1968 300000 0x00010002 #off_to_idle -1969 0 0x00010002 #idle_to_ready -1970 2 0x00010002 #i2c_bus -1971 1080 0x00010002 #reg_group_id -1972 0xFFFF 0x00010002 #cal_grp_id -1973 0xFFFF 0x00010002 #gpio1 -1974 0xFFFF 0x00010002 #gpio2 -1975 60 0x00010002 #sensor_id -1976 0x1C 0x00010002 #i2c_address -1977 28 0x00010002 #data_type1 -1978 29 0x00010002 #data_type2 -1979 0xFF 0x00010002 #rel_sns_idx -1980 0 0x00010002 #sens_default -1981 0 0x00010002 #flags -1986 0 0x00010002 #device_select - -# SSI SMGR Version -3600 1 0x00010001 #Maj Ver -3601 2 0x00010001 #Min Ver - -# SSI SMGR Cfg 5: -3602 0 0x00010001 #UUID low -3603 0 0x00010001 #UUID high -3604 300000 0x00010001 #off_to_idle -3605 0 0x00010001 #idle_to_ready -3606 2 0x00010001 #i2c_bus -3607 1080 0x00010001 #reg_group_id -3608 0xFFFF 0x00010001 #cal_grp_id -3609 0xFFFF 0x00010001 #gpio1 -3610 0xFFFF 0x00010001 #gpio2 -3611 60 0x00010001 #sensor_id -3612 0x1C 0x00010001 #i2c_address -3613 28 0x00010001 #data_type1 -3614 29 0x00010001 #data_type2 -3615 0xFF 0x00010001 #rel_sns_idx -3616 0 0x00010001 #sens_default -3617 0 0x00010001 #flags -3682 0 0x00010001 #device_select -3687 0x2 0x00010001 #vdd -3688 0x2 0x00010001 #vddio - -# SSI SMGR Cfg 6: -3618 0 0x00010003 #UUID -3619 0 0x00010003 #UUID -3620 5700 0x00010003 #off_to_idle -3621 10000 0x00010003 #idle_to_ready -3622 3 0x00010003 #i2c_bus -3623 1040 0x00010003 #reg_group_id -3624 0xFFFF 0x00010003 #cal_grp_id -3625 118 0x00010003 #gpio1 -3626 0xFFFF 0x00010003 #gpio2 -3627 60 0x00010003 #sensor_id -3628 0x39 0x00010003 #i2c_address -3629 28 0x00010003 #data_type1 -3630 0 0x00010003 #data_type2 -3631 0xFF 0x00010003 #rel_sns_idx -3632 0 0x00010003 #sens_default -3633 0x80 0x00010003 #flags -3683 0 0x00010003 #device_select -3689 0x2 0x00010003 #vdd -3690 0x2 0x00010003 #vddio - -# -# SSI GPIO configuration -#----------------------------- -2700 1 0x00010001 #maj ver -2701 0 0x00010001 # min ver -2706 0xFFFF 0x00010004 # RESET pin - -# -# SSC GPIO CFG (SSC_4,5 as active) -#----------------------------- -6300 1 0x00010003 # version -6301 0x0104 0x00010003 # gpio num -6302 1 0x00010003 # active func sel -6303 1 0x00010003 # active dir -6304 0 0x00010003 # active pull -6305 0 0x00010003 # active drive -6306 1 0x00010003 # inactive func sel -6307 1 0x00010003 # inactive dir -6308 2 0x00010003 # inactive pull -6309 0 0x00010003 # inactive drive - -6310 1 0x00010003 # version -6311 0x0105 0x00010003 # gpio num -6312 1 0x00010003 # active func sel -6313 1 0x00010003 # active dir -6314 0 0x00010003 # active pull -6315 0 0x00010003 # active drive -6316 1 0x00010003 # inactive func sel -6317 1 0x00010003 # inactive dir -6318 2 0x00010003 # inactive pull -6319 0 0x00010003 # inactive drive - -# -# SSC GPIO CFG -#----------------------------- -6350 1 0x00010001 # version -6351 0x0106 0x00010001 # gpio num (SSC GPIO 6) -6352 0 0x00010001 # active func sel -6353 0 0x00010001 # active dir -6354 0 0x00010001 # active pull -6355 0 0x00010001 # active drive -6356 0 0x00010001 # inactive func sel -6357 0 0x00010001 # inactive dir -6358 0 0x00010001 # inactive pull -6359 0 0x00010001 # inactive drive - -# -# SSC GPIO CFG -#----------------------------- -6360 1 0x00010001 # version -6361 0x0107 0x00010001 # gpio num (SSC GPIO 7) -6362 0 0x00010001 # active func sel -6363 0 0x00010001 # active dir -6364 3 0x00010001 # active pull -6365 0 0x00010001 # active drive -6366 0 0x00010001 # inactive func sel -6367 0 0x00010001 # inactive dir -6368 3 0x00010001 # inactive pull -6369 0 0x00010001 # inactive drive - -# -# MSM GPIO CFG -#----------------------------- -6450 1 0x00010001 # version -6451 0xFFFF 0x00010003 # gpio num 0x76 - 118 (MSM GPIO 118) // Disable -6452 0 0x00010001 # active func sel -6453 0 0x00010001 # active dir -6454 0 0x00010001 # active pull -6455 0 0x00010001 # active drive -6456 0 0x00010001 # inactive func sel -6457 0 0x00010001 # inactive dir -6458 0 0x00010001 # inactive pull -6459 0 0x00010001 # inactive drive - -# Mag Cal config -#----------------------------- -3801 1 0x00010001 -3804 0x000a0000 0x10001 #Sample Rate diff --git a/device.mk b/device.mk index 8abe2a9..e51adb7 100755 --- a/device.mk +++ b/device.mk @@ -354,11 +354,6 @@ PRODUCT_PACKAGES += \ android.hardware.sensors@1.0-impl \ android.hardware.sensors@1.0-service -# Sensors -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/configs/sensors/hals.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/hals.conf \ - $(LOCAL_PATH)/configs/sensors/sensor_def_qcomdev.conf:$(TARGET_COPY_OUT_SYSTEM)/etc/sensors/sensor_def_qcomdev.conf - # Soong namespaces PRODUCT_SOONG_NAMESPACES += \ $(LOCAL_PATH) \