android_device_samsung_msm8.../configs/audio/audio_policy_configuration.xml
Deokgyu Yang 5e6b1b25ff Update audio, media stuffs from T825N0KOU3CTD1
Signed-off-by: Deokgyu Yang <secugyu@gmail.com>
Change-Id: Iaf98b3048d0bddfa324d28c0f28a5ce1d2203f16
2021-05-12 18:17:18 +09:00

203 lines
12 KiB
XML

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- Copyright (c) 2016-2017, The Linux Foundation. All rights reserved
Not a Contribution.
-->
<!-- Copyright (C) 2015 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
<!-- version section contains a “version” tag in the form “major.minor” e.g version=”1.0” -->
<!-- Global configuration Decalaration -->
<globalConfiguration speaker_drc_enabled="true"/>
<!-- Modules section:
There is one section per audio HW module present on the platform.
Each module section will contains two mandatory tags for audio HAL “halVersion” and “name”.
The module names are the same as in current .conf file:
“primary”, “A2DP”, “remote_submix”, “USB”
Each module will contain the following sections:
“devicePorts”: a list of device descriptors for all input and output devices accessible via this
module.
This contains both permanently attached devices and removable devices.
“mixPorts”: listing all output and input streams exposed by the audio HAL
“routes”: list of possible connections between input and output devices or between stream and
devices.
"route": is defined by an attribute:
-"type": <mux|mix> means all sources are mutual exclusive (mux) or can be mixed (mix)
-"sink": the sink involved in this route
-"sources": all the sources than can be connected to the sink via vis route
“attachedDevices”: permanently attached devices.
The attachedDevices section is a list of devices names. The names correspond to device names
defined in <devicePorts> section.
“defaultOutputDevice”: device to be used by default when no policy rule applies
-->
<modules>
<!-- Primary Audio HAL -->
<module name="primary" halVersion="2.0">
<attachedDevices>
<item>Speaker</item>
<item>Built-In Mic</item>
<item>Built-In Back Mic</item>
</attachedDevices>
<defaultOutputDevice>Speaker</defaultOutputDevice>
<mixPorts>
<mixPort name="primary output" role="source"
flags="AUDIO_OUTPUT_FLAG_FAST|AUDIO_OUTPUT_FLAG_PRIMARY">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="deep_buffer" role="source"
flags="AUDIO_OUTPUT_FLAG_DEEP_BUFFER">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</mixPort>
<mixPort name="compressed_offload" role="source"
flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
<profile name="" format="AUDIO_FORMAT_MP3"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_LC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_LC"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_HE_V1"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
<profile name="" format="AUDIO_FORMAT_AAC_ADTS_HE_V2"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000,64000,88200,96000"
channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
</mixPort>
<mixPort name="voice_tx" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</mixPort>
<mixPort name="primary input" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</mixPort>
<mixPort name="voice_rx" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</mixPort>
</mixPorts>
<devicePorts>
<!-- Output devices declaration, i.e. Sink DEVICE PORT -->
<devicePort tagName="Earpiece" type="AUDIO_DEVICE_OUT_EARPIECE" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</devicePort>
<devicePort tagName="Speaker" role="sink" type="AUDIO_DEVICE_OUT_SPEAKER">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Wired Headphones" type="AUDIO_DEVICE_OUT_WIRED_HEADPHONE" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="BT SCO" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="Telephony Tx" type="AUDIO_DEVICE_OUT_TELEPHONY_TX" role="sink">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_OUT_MONO"/>
</devicePort>
<devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</devicePort>
<devicePort tagName="Built-In Back Mic" type="AUDIO_DEVICE_IN_BACK_MIC" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</devicePort>
<devicePort tagName="Wired Headset Mic" type="AUDIO_DEVICE_IN_WIRED_HEADSET" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO,AUDIO_CHANNEL_IN_FRONT_BACK"/>
</devicePort>
<devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</devicePort>
<devicePort tagName="Telephony Rx" type="AUDIO_DEVICE_IN_TELEPHONY_RX" role="source">
<profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
samplingRates="8000,16000" channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</devicePort>
</devicePorts>
<!-- route declaration, i.e. list all available sources for a given sink -->
<routes>
<route type="mix" sink="Earpiece"
sources="primary output,deep_buffer,BT SCO Headset Mic"/>
<route type="mix" sink="Speaker"
sources="primary output,deep_buffer,compressed_offload,BT SCO Headset Mic,Telephony Rx"/>
<route type="mix" sink="Wired Headset"
sources="primary output,deep_buffer,compressed_offload,BT SCO Headset Mic,Telephony Rx"/>
<route type="mix" sink="Wired Headphones"
sources="primary output,deep_buffer,compressed_offload,BT SCO Headset Mic,Telephony Rx"/>
<route type="mix" sink="Telephony Tx"
sources="voice_tx"/>
<route type="mix" sink="primary input"
sources="Built-In Mic,Built-In Back Mic,Wired Headset Mic,BT SCO Headset Mic"/>
<route type="mix" sink="voice_rx"
sources="Telephony Rx"/>
</routes>
</module>
<!-- A2dp Audio HAL -->
<xi:include href="a2dp_audio_policy_configuration.xml"/>
<!-- Usb Audio HAL -->
<xi:include href="usb_audio_policy_configuration.xml"/>
<!-- Remote Submix Audio HAL -->
<xi:include href="r_submix_audio_policy_configuration.xml"/>
</modules>
<!-- End of Modules section -->
<!-- Volume section -->
<xi:include href="audio_policy_volumes.xml"/>
<xi:include href="default_volume_tables.xml"/>
<!-- End of Volume section -->
</audioPolicyConfiguration>