android_kernel_motorola_sm6225/drivers/acpi/parser/psopcode.c

782 lines
31 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: psopcode - Parser/Interpreter opcode information table
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 04:49:35 +02:00
#include <acpi/acopcode.h>
#include <acpi/amlcode.h>
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psopcode")
/*******************************************************************************
*
* NAME: acpi_gbl_aml_op_info
*
* DESCRIPTION: Opcode table. Each entry contains <opcode, type, name, operands>
* The name is a simple ascii string, the operand specifier is an
* ascii string with one letter per operand. The letter specifies
* the operand type.
*
******************************************************************************/
/*
* Summary of opcode types/flags
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 04:49:35 +02:00
*
Opcodes that have associated namespace objects (AML_NSOBJECT flag)
AML_SCOPE_OP
AML_DEVICE_OP
AML_THERMAL_ZONE_OP
AML_METHOD_OP
AML_POWER_RES_OP
AML_PROCESSOR_OP
AML_FIELD_OP
AML_INDEX_FIELD_OP
AML_BANK_FIELD_OP
AML_NAME_OP
AML_ALIAS_OP
AML_MUTEX_OP
AML_EVENT_OP
AML_REGION_OP
AML_CREATE_FIELD_OP
AML_CREATE_BIT_FIELD_OP
AML_CREATE_BYTE_FIELD_OP
AML_CREATE_WORD_FIELD_OP
AML_CREATE_DWORD_FIELD_OP
AML_CREATE_QWORD_FIELD_OP
AML_INT_NAMEDFIELD_OP
AML_INT_METHODCALL_OP
AML_INT_NAMEPATH_OP
Opcodes that are "namespace" opcodes (AML_NSOPCODE flag)
AML_SCOPE_OP
AML_DEVICE_OP
AML_THERMAL_ZONE_OP
AML_METHOD_OP
AML_POWER_RES_OP
AML_PROCESSOR_OP
AML_FIELD_OP
AML_INDEX_FIELD_OP
AML_BANK_FIELD_OP
AML_NAME_OP
AML_ALIAS_OP
AML_MUTEX_OP
AML_EVENT_OP
AML_REGION_OP
AML_INT_NAMEDFIELD_OP
Opcodes that have an associated namespace node (AML_NSNODE flag)
AML_SCOPE_OP
AML_DEVICE_OP
AML_THERMAL_ZONE_OP
AML_METHOD_OP
AML_POWER_RES_OP
AML_PROCESSOR_OP
AML_NAME_OP
AML_ALIAS_OP
AML_MUTEX_OP
AML_EVENT_OP
AML_REGION_OP
AML_CREATE_FIELD_OP
AML_CREATE_BIT_FIELD_OP
AML_CREATE_BYTE_FIELD_OP
AML_CREATE_WORD_FIELD_OP
AML_CREATE_DWORD_FIELD_OP
AML_CREATE_QWORD_FIELD_OP
AML_INT_NAMEDFIELD_OP
AML_INT_METHODCALL_OP
AML_INT_NAMEPATH_OP
Opcodes that define named ACPI objects (AML_NAMED flag)
AML_SCOPE_OP
AML_DEVICE_OP
AML_THERMAL_ZONE_OP
AML_METHOD_OP
AML_POWER_RES_OP
AML_PROCESSOR_OP
AML_NAME_OP
AML_ALIAS_OP
AML_MUTEX_OP
AML_EVENT_OP
AML_REGION_OP
AML_INT_NAMEDFIELD_OP
Opcodes that contain executable AML as part of the definition that
must be deferred until needed
AML_METHOD_OP
AML_VAR_PACKAGE_OP
AML_CREATE_FIELD_OP
AML_CREATE_BIT_FIELD_OP
AML_CREATE_BYTE_FIELD_OP
AML_CREATE_WORD_FIELD_OP
AML_CREATE_DWORD_FIELD_OP
AML_CREATE_QWORD_FIELD_OP
AML_REGION_OP
AML_BUFFER_OP
Field opcodes
AML_CREATE_FIELD_OP
AML_FIELD_OP
AML_INDEX_FIELD_OP
AML_BANK_FIELD_OP
Field "Create" opcodes
AML_CREATE_FIELD_OP
AML_CREATE_BIT_FIELD_OP
AML_CREATE_BYTE_FIELD_OP
AML_CREATE_WORD_FIELD_OP
AML_CREATE_DWORD_FIELD_OP
AML_CREATE_QWORD_FIELD_OP
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 04:49:35 +02:00
******************************************************************************/
/*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 04:49:35 +02:00
* Master Opcode information table. A summary of everything we know about each
* opcode, all in one place.
*/
const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
/*! [Begin] no source code translation */
/* Index Name Parser Args Interpreter Args ObjectType Class Type Flags */
/* 00 */ ACPI_OP("Zero", ARGP_ZERO_OP, ARGI_ZERO_OP, ACPI_TYPE_INTEGER,
AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
/* 01 */ ACPI_OP("One", ARGP_ONE_OP, ARGI_ONE_OP, ACPI_TYPE_INTEGER,
AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
/* 02 */ ACPI_OP("Alias", ARGP_ALIAS_OP, ARGI_ALIAS_OP,
ACPI_TYPE_LOCAL_ALIAS, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_SIMPLE,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 03 */ ACPI_OP("Name", ARGP_NAME_OP, ARGI_NAME_OP, ACPI_TYPE_ANY,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_COMPLEX,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 04 */ ACPI_OP("ByteConst", ARGP_BYTE_OP, ARGI_BYTE_OP,
ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, AML_CONSTANT),
/* 05 */ ACPI_OP("WordConst", ARGP_WORD_OP, ARGI_WORD_OP,
ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, AML_CONSTANT),
/* 06 */ ACPI_OP("DwordConst", ARGP_DWORD_OP, ARGI_DWORD_OP,
ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, AML_CONSTANT),
/* 07 */ ACPI_OP("String", ARGP_STRING_OP, ARGI_STRING_OP,
ACPI_TYPE_STRING, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, AML_CONSTANT),
/* 08 */ ACPI_OP("Scope", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
ACPI_TYPE_LOCAL_SCOPE, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 09 */ ACPI_OP("Buffer", ARGP_BUFFER_OP, ARGI_BUFFER_OP,
ACPI_TYPE_BUFFER, AML_CLASS_CREATE,
AML_TYPE_CREATE_OBJECT,
AML_HAS_ARGS | AML_DEFER | AML_CONSTANT),
/* 0A */ ACPI_OP("Package", ARGP_PACKAGE_OP, ARGI_PACKAGE_OP,
ACPI_TYPE_PACKAGE, AML_CLASS_CREATE,
AML_TYPE_CREATE_OBJECT,
AML_HAS_ARGS | AML_DEFER | AML_CONSTANT),
/* 0B */ ACPI_OP("Method", ARGP_METHOD_OP, ARGI_METHOD_OP,
ACPI_TYPE_METHOD, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_COMPLEX,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED | AML_DEFER),
/* 0C */ ACPI_OP("Local0", ARGP_LOCAL0, ARGI_LOCAL0,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 0D */ ACPI_OP("Local1", ARGP_LOCAL1, ARGI_LOCAL1,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 0E */ ACPI_OP("Local2", ARGP_LOCAL2, ARGI_LOCAL2,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 0F */ ACPI_OP("Local3", ARGP_LOCAL3, ARGI_LOCAL3,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 10 */ ACPI_OP("Local4", ARGP_LOCAL4, ARGI_LOCAL4,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 11 */ ACPI_OP("Local5", ARGP_LOCAL5, ARGI_LOCAL5,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 12 */ ACPI_OP("Local6", ARGP_LOCAL6, ARGI_LOCAL6,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 13 */ ACPI_OP("Local7", ARGP_LOCAL7, ARGI_LOCAL7,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LOCAL_VARIABLE, 0),
/* 14 */ ACPI_OP("Arg0", ARGP_ARG0, ARGI_ARG0,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 15 */ ACPI_OP("Arg1", ARGP_ARG1, ARGI_ARG1,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 16 */ ACPI_OP("Arg2", ARGP_ARG2, ARGI_ARG2,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 17 */ ACPI_OP("Arg3", ARGP_ARG3, ARGI_ARG3,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 18 */ ACPI_OP("Arg4", ARGP_ARG4, ARGI_ARG4,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 19 */ ACPI_OP("Arg5", ARGP_ARG5, ARGI_ARG5,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 1A */ ACPI_OP("Arg6", ARGP_ARG6, ARGI_ARG6,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_METHOD_ARGUMENT, 0),
/* 1B */ ACPI_OP("Store", ARGP_STORE_OP, ARGI_STORE_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R),
/* 1C */ ACPI_OP("RefOf", ARGP_REF_OF_OP, ARGI_REF_OF_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R),
/* 1D */ ACPI_OP("Add", ARGP_ADD_OP, ARGI_ADD_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 1E */ ACPI_OP("Concatenate", ARGP_CONCAT_OP, ARGI_CONCAT_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 1F */ ACPI_OP("Subtract", ARGP_SUBTRACT_OP, ARGI_SUBTRACT_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 20 */ ACPI_OP("Increment", ARGP_INCREMENT_OP, ARGI_INCREMENT_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
/* 21 */ ACPI_OP("Decrement", ARGP_DECREMENT_OP, ARGI_DECREMENT_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
/* 22 */ ACPI_OP("Multiply", ARGP_MULTIPLY_OP, ARGI_MULTIPLY_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 23 */ ACPI_OP("Divide", ARGP_DIVIDE_OP, ARGI_DIVIDE_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_2T_1R,
AML_FLAGS_EXEC_2A_2T_1R | AML_CONSTANT),
/* 24 */ ACPI_OP("ShiftLeft", ARGP_SHIFT_LEFT_OP, ARGI_SHIFT_LEFT_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 25 */ ACPI_OP("ShiftRight", ARGP_SHIFT_RIGHT_OP, ARGI_SHIFT_RIGHT_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 26 */ ACPI_OP("And", ARGP_BIT_AND_OP, ARGI_BIT_AND_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 27 */ ACPI_OP("NAnd", ARGP_BIT_NAND_OP, ARGI_BIT_NAND_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 28 */ ACPI_OP("Or", ARGP_BIT_OR_OP, ARGI_BIT_OR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 29 */ ACPI_OP("NOr", ARGP_BIT_NOR_OP, ARGI_BIT_NOR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 2A */ ACPI_OP("XOr", ARGP_BIT_XOR_OP, ARGI_BIT_XOR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_MATH | AML_CONSTANT),
/* 2B */ ACPI_OP("Not", ARGP_BIT_NOT_OP, ARGI_BIT_NOT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 2C */ ACPI_OP("FindSetLeftBit", ARGP_FIND_SET_LEFT_BIT_OP,
ARGI_FIND_SET_LEFT_BIT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 2D */ ACPI_OP("FindSetRightBit", ARGP_FIND_SET_RIGHT_BIT_OP,
ARGI_FIND_SET_RIGHT_BIT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 2E */ ACPI_OP("DerefOf", ARGP_DEREF_OF_OP, ARGI_DEREF_OF_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_1R, AML_FLAGS_EXEC_1A_0T_1R),
/* 2F */ ACPI_OP("Notify", ARGP_NOTIFY_OP, ARGI_NOTIFY_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_0T_0R, AML_FLAGS_EXEC_2A_0T_0R),
/* 30 */ ACPI_OP("SizeOf", ARGP_SIZE_OF_OP, ARGI_SIZE_OF_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
/* 31 */ ACPI_OP("Index", ARGP_INDEX_OP, ARGI_INDEX_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R),
/* 32 */ ACPI_OP("Match", ARGP_MATCH_OP, ARGI_MATCH_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_6A_0T_1R,
AML_FLAGS_EXEC_6A_0T_1R | AML_CONSTANT),
/* 33 */ ACPI_OP("CreateDWordField", ARGP_CREATE_DWORD_FIELD_OP,
ARGI_CREATE_DWORD_FIELD_OP,
ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
AML_TYPE_CREATE_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
AML_DEFER | AML_CREATE),
/* 34 */ ACPI_OP("CreateWordField", ARGP_CREATE_WORD_FIELD_OP,
ARGI_CREATE_WORD_FIELD_OP,
ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
AML_TYPE_CREATE_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
AML_DEFER | AML_CREATE),
/* 35 */ ACPI_OP("CreateByteField", ARGP_CREATE_BYTE_FIELD_OP,
ARGI_CREATE_BYTE_FIELD_OP,
ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
AML_TYPE_CREATE_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
AML_DEFER | AML_CREATE),
/* 36 */ ACPI_OP("CreateBitField", ARGP_CREATE_BIT_FIELD_OP,
ARGI_CREATE_BIT_FIELD_OP,
ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
AML_TYPE_CREATE_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
AML_DEFER | AML_CREATE),
/* 37 */ ACPI_OP("ObjectType", ARGP_TYPE_OP, ARGI_TYPE_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
/* 38 */ ACPI_OP("LAnd", ARGP_LAND_OP, ARGI_LAND_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
/* 39 */ ACPI_OP("LOr", ARGP_LOR_OP, ARGI_LOR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
/* 3A */ ACPI_OP("LNot", ARGP_LNOT_OP, ARGI_LNOT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
/* 3B */ ACPI_OP("LEqual", ARGP_LEQUAL_OP, ARGI_LEQUAL_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_0T_1R,
AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
/* 3C */ ACPI_OP("LGreater", ARGP_LGREATER_OP, ARGI_LGREATER_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_0T_1R,
AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
/* 3D */ ACPI_OP("LLess", ARGP_LLESS_OP, ARGI_LLESS_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL | AML_CONSTANT),
/* 3E */ ACPI_OP("If", ARGP_IF_OP, ARGI_IF_OP, ACPI_TYPE_ANY,
AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 3F */ ACPI_OP("Else", ARGP_ELSE_OP, ARGI_ELSE_OP, ACPI_TYPE_ANY,
AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 40 */ ACPI_OP("While", ARGP_WHILE_OP, ARGI_WHILE_OP, ACPI_TYPE_ANY,
AML_CLASS_CONTROL, AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 41 */ ACPI_OP("Noop", ARGP_NOOP_OP, ARGI_NOOP_OP, ACPI_TYPE_ANY,
AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 42 */ ACPI_OP("Return", ARGP_RETURN_OP, ARGI_RETURN_OP,
ACPI_TYPE_ANY, AML_CLASS_CONTROL,
AML_TYPE_CONTROL, AML_HAS_ARGS),
/* 43 */ ACPI_OP("Break", ARGP_BREAK_OP, ARGI_BREAK_OP, ACPI_TYPE_ANY,
AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 44 */ ACPI_OP("BreakPoint", ARGP_BREAK_POINT_OP, ARGI_BREAK_POINT_OP,
ACPI_TYPE_ANY, AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 45 */ ACPI_OP("Ones", ARGP_ONES_OP, ARGI_ONES_OP, ACPI_TYPE_INTEGER,
AML_CLASS_ARGUMENT, AML_TYPE_CONSTANT, AML_CONSTANT),
/* Prefixed opcodes (Two-byte opcodes with a prefix op) */
/* 46 */ ACPI_OP("Mutex", ARGP_MUTEX_OP, ARGI_MUTEX_OP, ACPI_TYPE_MUTEX,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 47 */ ACPI_OP("Event", ARGP_EVENT_OP, ARGI_EVENT_OP, ACPI_TYPE_EVENT,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE | AML_NAMED),
/* 48 */ ACPI_OP("CondRefOf", ARGP_COND_REF_OF_OP, ARGI_COND_REF_OF_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_1T_1R, AML_FLAGS_EXEC_1A_1T_1R),
/* 49 */ ACPI_OP("CreateField", ARGP_CREATE_FIELD_OP,
ARGI_CREATE_FIELD_OP, ACPI_TYPE_BUFFER_FIELD,
AML_CLASS_CREATE, AML_TYPE_CREATE_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
AML_DEFER | AML_FIELD | AML_CREATE),
/* 4A */ ACPI_OP("Load", ARGP_LOAD_OP, ARGI_LOAD_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_0R,
AML_FLAGS_EXEC_1A_1T_0R),
/* 4B */ ACPI_OP("Stall", ARGP_STALL_OP, ARGI_STALL_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
AML_FLAGS_EXEC_1A_0T_0R),
/* 4C */ ACPI_OP("Sleep", ARGP_SLEEP_OP, ARGI_SLEEP_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
AML_FLAGS_EXEC_1A_0T_0R),
/* 4D */ ACPI_OP("Acquire", ARGP_ACQUIRE_OP, ARGI_ACQUIRE_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_0T_1R, AML_FLAGS_EXEC_2A_0T_1R),
/* 4E */ ACPI_OP("Signal", ARGP_SIGNAL_OP, ARGI_SIGNAL_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
/* 4F */ ACPI_OP("Wait", ARGP_WAIT_OP, ARGI_WAIT_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
AML_FLAGS_EXEC_2A_0T_1R),
/* 50 */ ACPI_OP("Reset", ARGP_RESET_OP, ARGI_RESET_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_0R,
AML_FLAGS_EXEC_1A_0T_0R),
/* 51 */ ACPI_OP("Release", ARGP_RELEASE_OP, ARGI_RELEASE_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
/* 52 */ ACPI_OP("FromBCD", ARGP_FROM_BCD_OP, ARGI_FROM_BCD_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 53 */ ACPI_OP("ToBCD", ARGP_TO_BCD_OP, ARGI_TO_BCD_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 54 */ ACPI_OP("Unload", ARGP_UNLOAD_OP, ARGI_UNLOAD_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_0T_0R, AML_FLAGS_EXEC_1A_0T_0R),
/* 55 */ ACPI_OP("Revision", ARGP_REVISION_OP, ARGI_REVISION_OP,
ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
AML_TYPE_CONSTANT, 0),
/* 56 */ ACPI_OP("Debug", ARGP_DEBUG_OP, ARGI_DEBUG_OP,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_CONSTANT, 0),
/* 57 */ ACPI_OP("Fatal", ARGP_FATAL_OP, ARGI_FATAL_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_3A_0T_0R,
AML_FLAGS_EXEC_3A_0T_0R),
/* 58 */ ACPI_OP("OperationRegion", ARGP_REGION_OP, ARGI_REGION_OP,
ACPI_TYPE_REGION, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_COMPLEX,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED | AML_DEFER),
/* 59 */ ACPI_OP("Field", ARGP_FIELD_OP, ARGI_FIELD_OP, ACPI_TYPE_ANY,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
/* 5A */ ACPI_OP("Device", ARGP_DEVICE_OP, ARGI_DEVICE_OP,
ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 5B */ ACPI_OP("Processor", ARGP_PROCESSOR_OP, ARGI_PROCESSOR_OP,
ACPI_TYPE_PROCESSOR, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_SIMPLE,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 5C */ ACPI_OP("PowerResource", ARGP_POWER_RES_OP, ARGI_POWER_RES_OP,
ACPI_TYPE_POWER, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_SIMPLE,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 5D */ ACPI_OP("ThermalZone", ARGP_THERMAL_ZONE_OP,
ARGI_THERMAL_ZONE_OP, ACPI_TYPE_THERMAL,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_NO_OBJ,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 5E */ ACPI_OP("IndexField", ARGP_INDEX_FIELD_OP, ARGI_INDEX_FIELD_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
/* 5F */ ACPI_OP("BankField", ARGP_BANK_FIELD_OP, ARGI_BANK_FIELD_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
/* Internal opcodes that map to invalid AML opcodes */
/* 60 */ ACPI_OP("LNotEqual", ARGP_LNOTEQUAL_OP, ARGI_LNOTEQUAL_OP,
ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
AML_TYPE_BOGUS, AML_HAS_ARGS | AML_CONSTANT),
/* 61 */ ACPI_OP("LLessEqual", ARGP_LLESSEQUAL_OP, ARGI_LLESSEQUAL_OP,
ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
AML_TYPE_BOGUS, AML_HAS_ARGS | AML_CONSTANT),
/* 62 */ ACPI_OP("LGreaterEqual", ARGP_LGREATEREQUAL_OP,
ARGI_LGREATEREQUAL_OP, ACPI_TYPE_ANY,
AML_CLASS_INTERNAL, AML_TYPE_BOGUS,
AML_HAS_ARGS | AML_CONSTANT),
/* 63 */ ACPI_OP("-NamePath-", ARGP_NAMEPATH_OP, ARGI_NAMEPATH_OP,
ACPI_TYPE_LOCAL_REFERENCE, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, AML_NSOBJECT | AML_NSNODE),
/* 64 */ ACPI_OP("-MethodCall-", ARGP_METHODCALL_OP, ARGI_METHODCALL_OP,
ACPI_TYPE_METHOD, AML_CLASS_METHOD_CALL,
AML_TYPE_METHOD_CALL,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE),
/* 65 */ ACPI_OP("-ByteList-", ARGP_BYTELIST_OP, ARGI_BYTELIST_OP,
ACPI_TYPE_ANY, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, 0),
/* 66 */ ACPI_OP("-ReservedField-", ARGP_RESERVEDFIELD_OP,
ARGI_RESERVEDFIELD_OP, ACPI_TYPE_ANY,
AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
/* 67 */ ACPI_OP("-NamedField-", ARGP_NAMEDFIELD_OP, ARGI_NAMEDFIELD_OP,
ACPI_TYPE_ANY, AML_CLASS_INTERNAL,
AML_TYPE_BOGUS,
AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE | AML_NAMED),
/* 68 */ ACPI_OP("-AccessField-", ARGP_ACCESSFIELD_OP,
ARGI_ACCESSFIELD_OP, ACPI_TYPE_ANY,
AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
/* 69 */ ACPI_OP("-StaticString", ARGP_STATICSTRING_OP,
ARGI_STATICSTRING_OP, ACPI_TYPE_ANY,
AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0),
/* 6A */ ACPI_OP("-Return Value-", ARG_NONE, ARG_NONE, ACPI_TYPE_ANY,
AML_CLASS_RETURN_VALUE, AML_TYPE_RETURN,
AML_HAS_ARGS | AML_HAS_RETVAL),
/* 6B */ ACPI_OP("-UNKNOWN_OP-", ARG_NONE, ARG_NONE, ACPI_TYPE_INVALID,
AML_CLASS_UNKNOWN, AML_TYPE_BOGUS, AML_HAS_ARGS),
/* 6C */ ACPI_OP("-ASCII_ONLY-", ARG_NONE, ARG_NONE, ACPI_TYPE_ANY,
AML_CLASS_ASCII, AML_TYPE_BOGUS, AML_HAS_ARGS),
/* 6D */ ACPI_OP("-PREFIX_ONLY-", ARG_NONE, ARG_NONE, ACPI_TYPE_ANY,
AML_CLASS_PREFIX, AML_TYPE_BOGUS, AML_HAS_ARGS),
/* ACPI 2.0 opcodes */
/* 6E */ ACPI_OP("QwordConst", ARGP_QWORD_OP, ARGI_QWORD_OP,
ACPI_TYPE_INTEGER, AML_CLASS_ARGUMENT,
AML_TYPE_LITERAL, AML_CONSTANT),
/* 6F */ ACPI_OP("Package", /* Var */ ARGP_VAR_PACKAGE_OP,
ARGI_VAR_PACKAGE_OP, ACPI_TYPE_PACKAGE,
AML_CLASS_CREATE, AML_TYPE_CREATE_OBJECT,
AML_HAS_ARGS | AML_DEFER),
/* 70 */ ACPI_OP("ConcatenateResTemplate", ARGP_CONCAT_RES_OP,
ARGI_CONCAT_RES_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 71 */ ACPI_OP("Mod", ARGP_MOD_OP, ARGI_MOD_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 72 */ ACPI_OP("CreateQWordField", ARGP_CREATE_QWORD_FIELD_OP,
ARGI_CREATE_QWORD_FIELD_OP,
ACPI_TYPE_BUFFER_FIELD, AML_CLASS_CREATE,
AML_TYPE_CREATE_FIELD,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSNODE |
AML_DEFER | AML_CREATE),
/* 73 */ ACPI_OP("ToBuffer", ARGP_TO_BUFFER_OP, ARGI_TO_BUFFER_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 74 */ ACPI_OP("ToDecimalString", ARGP_TO_DEC_STR_OP,
ARGI_TO_DEC_STR_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 75 */ ACPI_OP("ToHexString", ARGP_TO_HEX_STR_OP, ARGI_TO_HEX_STR_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 76 */ ACPI_OP("ToInteger", ARGP_TO_INTEGER_OP, ARGI_TO_INTEGER_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_1T_1R,
AML_FLAGS_EXEC_1A_1T_1R | AML_CONSTANT),
/* 77 */ ACPI_OP("ToString", ARGP_TO_STRING_OP, ARGI_TO_STRING_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_2A_1T_1R,
AML_FLAGS_EXEC_2A_1T_1R | AML_CONSTANT),
/* 78 */ ACPI_OP("CopyObject", ARGP_COPY_OP, ARGI_COPY_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_1A_1T_1R, AML_FLAGS_EXEC_1A_1T_1R),
/* 79 */ ACPI_OP("Mid", ARGP_MID_OP, ARGI_MID_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_3A_1T_1R,
AML_FLAGS_EXEC_3A_1T_1R | AML_CONSTANT),
/* 7A */ ACPI_OP("Continue", ARGP_CONTINUE_OP, ARGI_CONTINUE_OP,
ACPI_TYPE_ANY, AML_CLASS_CONTROL, AML_TYPE_CONTROL, 0),
/* 7B */ ACPI_OP("LoadTable", ARGP_LOAD_TABLE_OP, ARGI_LOAD_TABLE_OP,
ACPI_TYPE_ANY, AML_CLASS_EXECUTE,
AML_TYPE_EXEC_6A_0T_1R, AML_FLAGS_EXEC_6A_0T_1R),
/* 7C */ ACPI_OP("DataTableRegion", ARGP_DATA_REGION_OP,
ARGI_DATA_REGION_OP, ACPI_TYPE_REGION,
AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_SIMPLE,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
AML_NSNODE | AML_NAMED),
/* 7D */ ACPI_OP("[EvalSubTree]", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
AML_TYPE_NAMED_NO_OBJ,
AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE),
/* ACPI 3.0 opcodes */
/* 7E */ ACPI_OP("Timer", ARGP_TIMER_OP, ARGI_TIMER_OP, ACPI_TYPE_ANY,
AML_CLASS_EXECUTE, AML_TYPE_EXEC_0A_0T_1R,
AML_FLAGS_EXEC_0A_0T_1R)
/*! [End] no source code translation !*/
};
/*
* This table is directly indexed by the opcodes, and returns an
* index into the table above
*/
static const u8 acpi_gbl_short_op_index[256] = {
/* 0 1 2 3 4 5 6 7 */
/* 8 9 A B C D E F */
/* 0x00 */ 0x00, 0x01, _UNK, _UNK, _UNK, _UNK, 0x02, _UNK,
/* 0x08 */ 0x03, _UNK, 0x04, 0x05, 0x06, 0x07, 0x6E, _UNK,
/* 0x10 */ 0x08, 0x09, 0x0a, 0x6F, 0x0b, _UNK, _UNK, _UNK,
/* 0x18 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x20 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x28 */ _UNK, _UNK, _UNK, _UNK, _UNK, 0x63, _PFX, _PFX,
/* 0x30 */ 0x67, 0x66, 0x68, 0x65, 0x69, 0x64, 0x6A, 0x7D,
/* 0x38 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x40 */ _UNK, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
/* 0x48 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
/* 0x50 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC,
/* 0x58 */ _ASC, _ASC, _ASC, _UNK, _PFX, _UNK, _PFX, _ASC,
/* 0x60 */ 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
/* 0x68 */ 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, _UNK,
/* 0x70 */ 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22,
/* 0x78 */ 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
/* 0x80 */ 0x2b, 0x2c, 0x2d, 0x2e, 0x70, 0x71, 0x2f, 0x30,
/* 0x88 */ 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x72,
/* 0x90 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x73, 0x74,
/* 0x98 */ 0x75, 0x76, _UNK, _UNK, 0x77, 0x78, 0x79, 0x7A,
/* 0xA0 */ 0x3e, 0x3f, 0x40, 0x41, 0x42, 0x43, 0x60, 0x61,
/* 0xA8 */ 0x62, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xB0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xB8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xC0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xC8 */ _UNK, _UNK, _UNK, _UNK, 0x44, _UNK, _UNK, _UNK,
/* 0xD0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xD8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xE0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xE8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xF0 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0xF8 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, 0x45,
};
/*
* This table is indexed by the second opcode of the extended opcode
* pair. It returns an index into the opcode table (acpi_gbl_aml_op_info)
*/
static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
/* 0 1 2 3 4 5 6 7 */
/* 8 9 A B C D E F */
/* 0x00 */ _UNK, 0x46, 0x47, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x08 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x10 */ _UNK, _UNK, 0x48, 0x49, _UNK, _UNK, _UNK, _UNK,
/* 0x18 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, 0x7B,
/* 0x20 */ 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, 0x51,
/* 0x28 */ 0x52, 0x53, 0x54, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x30 */ 0x55, 0x56, 0x57, 0x7e, _UNK, _UNK, _UNK, _UNK,
/* 0x38 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x40 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x48 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x50 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x58 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x60 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x68 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x70 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x78 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK,
/* 0x80 */ 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
/* 0x88 */ 0x7C,
};
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_opcode_info
*
* PARAMETERS: Opcode - The AML opcode
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 04:49:35 +02:00
* RETURN: A pointer to the info about the opcode.
*
* DESCRIPTION: Find AML opcode description based on the opcode.
* NOTE: This procedure must ALWAYS return a valid pointer!
*
******************************************************************************/
const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
{
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 23:15:00 +02:00
ACPI_FUNCTION_NAME(ps_get_opcode_info);
/*
* Detect normal 8-bit opcode or extended 16-bit opcode
*/
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 06:00:00 +02:00
if (!(opcode & 0xFF00)) {
/* Simple (8-bit) opcode: 0-255, can't index beyond table */
return (&acpi_gbl_aml_op_info
[acpi_gbl_short_op_index[(u8) opcode]]);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 06:00:00 +02:00
}
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 06:00:00 +02:00
if (((opcode & 0xFF00) == AML_EXTENDED_OPCODE) &&
(((u8) opcode) <= MAX_EXTENDED_OPCODE)) {
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 06:00:00 +02:00
/* Valid extended (16-bit) opcode */
return (&acpi_gbl_aml_op_info
[acpi_gbl_long_op_index[(u8) opcode]]);
}
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 06:00:00 +02:00
/* Unknown AML opcode */
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Unknown AML opcode [%4.4X]\n", opcode));
return (&acpi_gbl_aml_op_info[_UNK]);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_opcode_name
*
* PARAMETERS: Opcode - The AML opcode
*
* RETURN: A pointer to the name of the opcode (ASCII String)
* Note: Never returns NULL.
*
* DESCRIPTION: Translate an opcode into a human-readable string
*
******************************************************************************/
char *acpi_ps_get_opcode_name(u16 opcode)
{
#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUG_OUTPUT)
const struct acpi_opcode_info *op;
op = acpi_ps_get_opcode_info(opcode);
/* Always guaranteed to return a valid pointer */
return (op->name);
#else
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 23:15:00 +02:00
return ("OpcodeName unavailable");
#endif
}