android_kernel_motorola_sm6225/arch/ia64/kernel/traps.c

669 lines
17 KiB
C
Raw Normal View History

/*
* Architecture-specific trap handling.
*
* Copyright (C) 1998-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*
* 05/12/00 grao <goutham.rao@intel.com> : added isr in siginfo for SIGFPE
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/vt_kern.h> /* For unblank_screen() */
#include <linux/module.h> /* for EXPORT_SYMBOL */
#include <linux/hardirq.h>
#include <linux/kprobes.h>
#include <linux/delay.h> /* for ssleep() */
#include <asm/fpswa.h>
#include <asm/ia32.h>
#include <asm/intrinsics.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
#include <asm/kdebug.h>
extern spinlock_t timerlist_lock;
fpswa_interface_t *fpswa_interface;
EXPORT_SYMBOL(fpswa_interface);
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 11:16:30 +02:00
ATOMIC_NOTIFIER_HEAD(ia64die_chain);
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
int
register_die_notifier(struct notifier_block *nb)
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
{
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 11:16:30 +02:00
return atomic_notifier_chain_register(&ia64die_chain, nb);
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
}
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
EXPORT_SYMBOL_GPL(register_die_notifier);
int
unregister_die_notifier(struct notifier_block *nb)
{
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 11:16:30 +02:00
return atomic_notifier_chain_unregister(&ia64die_chain, nb);
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
}
EXPORT_SYMBOL_GPL(unregister_die_notifier);
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
void __init
trap_init (void)
{
if (ia64_boot_param->fpswa)
/* FPSWA fixup: make the interface pointer a kernel virtual address: */
fpswa_interface = __va(ia64_boot_param->fpswa);
}
/*
* Unlock any spinlocks which will prevent us from getting the message out (timerlist_lock
* is acquired through the console unblank code)
*/
void
bust_spinlocks (int yes)
{
int loglevel_save = console_loglevel;
if (yes) {
oops_in_progress = 1;
return;
}
#ifdef CONFIG_VT
unblank_screen();
#endif
oops_in_progress = 0;
/*
* OK, the message is on the console. Now we call printk() without
* oops_in_progress set so that printk will give klogd a poke. Hold onto
* your hats...
*/
console_loglevel = 15; /* NMI oopser may have shut the console up */
printk(" ");
console_loglevel = loglevel_save;
}
void
die (const char *str, struct pt_regs *regs, long err)
{
static struct {
spinlock_t lock;
u32 lock_owner;
int lock_owner_depth;
} die = {
.lock = SPIN_LOCK_UNLOCKED,
.lock_owner = -1,
.lock_owner_depth = 0
};
static int die_counter;
int cpu = get_cpu();
if (die.lock_owner != cpu) {
console_verbose();
spin_lock_irq(&die.lock);
die.lock_owner = cpu;
die.lock_owner_depth = 0;
bust_spinlocks(1);
}
put_cpu();
if (++die.lock_owner_depth < 3) {
printk("%s[%d]: %s %ld [%d]\n",
current->comm, current->pid, str, err, ++die_counter);
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
(void) notify_die(DIE_OOPS, (char *)str, regs, err, 255, SIGSEGV);
show_regs(regs);
} else
printk(KERN_ERR "Recursive die() failure, output suppressed\n");
bust_spinlocks(0);
die.lock_owner = -1;
spin_unlock_irq(&die.lock);
if (panic_on_oops) {
printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
ssleep(5);
panic("Fatal exception");
}
do_exit(SIGSEGV);
}
void
die_if_kernel (char *str, struct pt_regs *regs, long err)
{
if (!user_mode(regs))
die(str, regs, err);
}
void
__kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
{
siginfo_t siginfo;
int sig, code;
/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
siginfo.si_imm = break_num;
siginfo.si_flags = 0; /* clear __ISR_VALID */
siginfo.si_isr = 0;
switch (break_num) {
case 0: /* unknown error (used by GCC for __builtin_abort()) */
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
if (notify_die(DIE_BREAK, "break 0", regs, break_num, TRAP_BRKPT, SIGTRAP)
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
== NOTIFY_STOP)
[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:27 +02:00
return;
die_if_kernel("bugcheck!", regs, break_num);
sig = SIGILL; code = ILL_ILLOPC;
break;
case 1: /* integer divide by zero */
sig = SIGFPE; code = FPE_INTDIV;
break;
case 2: /* integer overflow */
sig = SIGFPE; code = FPE_INTOVF;
break;
case 3: /* range check/bounds check */
sig = SIGFPE; code = FPE_FLTSUB;
break;
case 4: /* null pointer dereference */
sig = SIGSEGV; code = SEGV_MAPERR;
break;
case 5: /* misaligned data */
sig = SIGSEGV; code = BUS_ADRALN;
break;
case 6: /* decimal overflow */
sig = SIGFPE; code = __FPE_DECOVF;
break;
case 7: /* decimal divide by zero */
sig = SIGFPE; code = __FPE_DECDIV;
break;
case 8: /* packed decimal error */
sig = SIGFPE; code = __FPE_DECERR;
break;
case 9: /* invalid ASCII digit */
sig = SIGFPE; code = __FPE_INVASC;
break;
case 10: /* invalid decimal digit */
sig = SIGFPE; code = __FPE_INVDEC;
break;
case 11: /* paragraph stack overflow */
sig = SIGSEGV; code = __SEGV_PSTKOVF;
break;
case 0x3f000 ... 0x3ffff: /* bundle-update in progress */
sig = SIGILL; code = __ILL_BNDMOD;
break;
default:
if (break_num < 0x40000 || break_num > 0x100000)
die_if_kernel("Bad break", regs, break_num);
if (break_num < 0x80000) {
sig = SIGILL; code = __ILL_BREAK;
} else {
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
if (notify_die(DIE_BREAK, "bad break", regs, break_num, TRAP_BRKPT, SIGTRAP)
== NOTIFY_STOP)
return;
sig = SIGTRAP; code = TRAP_BRKPT;
}
}
siginfo.si_signo = sig;
siginfo.si_errno = 0;
siginfo.si_code = code;
force_sig_info(sig, &siginfo, current);
}
/*
* disabled_fph_fault() is called when a user-level process attempts to access f32..f127
* and it doesn't own the fp-high register partition. When this happens, we save the
* current fph partition in the task_struct of the fpu-owner (if necessary) and then load
* the fp-high partition of the current task (if necessary). Note that the kernel has
* access to fph by the time we get here, as the IVT's "Disabled FP-Register" handler takes
* care of clearing psr.dfh.
*/
static inline void
disabled_fph_fault (struct pt_regs *regs)
{
struct ia64_psr *psr = ia64_psr(regs);
/* first, grant user-level access to fph partition: */
psr->dfh = 0;
/*
* Make sure that no other task gets in on this processor
* while we're claiming the FPU
*/
preempt_disable();
#ifndef CONFIG_SMP
{
struct task_struct *fpu_owner
= (struct task_struct *)ia64_get_kr(IA64_KR_FPU_OWNER);
if (ia64_is_local_fpu_owner(current)) {
preempt_enable_no_resched();
return;
}
if (fpu_owner)
ia64_flush_fph(fpu_owner);
}
#endif /* !CONFIG_SMP */
ia64_set_local_fpu_owner(current);
if ((current->thread.flags & IA64_THREAD_FPH_VALID) != 0) {
__ia64_load_fpu(current->thread.fph);
psr->mfh = 0;
} else {
__ia64_init_fpu();
/*
* Set mfh because the state in thread.fph does not match the state in
* the fph partition.
*/
psr->mfh = 1;
}
preempt_enable_no_resched();
}
static inline int
fp_emulate (int fp_fault, void *bundle, long *ipsr, long *fpsr, long *isr, long *pr, long *ifs,
struct pt_regs *regs)
{
fp_state_t fp_state;
fpswa_ret_t ret;
if (!fpswa_interface)
return -1;
memset(&fp_state, 0, sizeof(fp_state_t));
/*
* compute fp_state. only FP registers f6 - f11 are used by the
* kernel, so set those bits in the mask and set the low volatile
* pointer to point to these registers.
*/
fp_state.bitmask_low64 = 0xfc0; /* bit6..bit11 */
fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) &regs->f6;
/*
* unsigned long (*EFI_FPSWA) (
* unsigned long trap_type,
* void *Bundle,
* unsigned long *pipsr,
* unsigned long *pfsr,
* unsigned long *pisr,
* unsigned long *ppreds,
* unsigned long *pifs,
* void *fp_state);
*/
ret = (*fpswa_interface->fpswa)((unsigned long) fp_fault, bundle,
(unsigned long *) ipsr, (unsigned long *) fpsr,
(unsigned long *) isr, (unsigned long *) pr,
(unsigned long *) ifs, &fp_state);
return ret.status;
}
/*
* Handle floating-point assist faults and traps.
*/
static int
handle_fpu_swa (int fp_fault, struct pt_regs *regs, unsigned long isr)
{
long exception, bundle[2];
unsigned long fault_ip;
struct siginfo siginfo;
static int fpu_swa_count = 0;
static unsigned long last_time;
fault_ip = regs->cr_iip;
if (!fp_fault && (ia64_psr(regs)->ri == 0))
fault_ip -= 16;
if (copy_from_user(bundle, (void __user *) fault_ip, sizeof(bundle)))
return -1;
if (jiffies - last_time > 5*HZ)
fpu_swa_count = 0;
if ((fpu_swa_count < 4) && !(current->thread.flags & IA64_THREAD_FPEMU_NOPRINT)) {
last_time = jiffies;
++fpu_swa_count;
printk(KERN_WARNING
"%s(%d): floating-point assist fault at ip %016lx, isr %016lx\n",
current->comm, current->pid, regs->cr_iip + ia64_psr(regs)->ri, isr);
}
exception = fp_emulate(fp_fault, bundle, &regs->cr_ipsr, &regs->ar_fpsr, &isr, &regs->pr,
&regs->cr_ifs, regs);
if (fp_fault) {
if (exception == 0) {
/* emulation was successful */
ia64_increment_ip(regs);
} else if (exception == -1) {
printk(KERN_ERR "handle_fpu_swa: fp_emulate() returned -1\n");
return -1;
} else {
/* is next instruction a trap? */
if (exception & 2) {
ia64_increment_ip(regs);
}
siginfo.si_signo = SIGFPE;
siginfo.si_errno = 0;
siginfo.si_code = __SI_FAULT; /* default code */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
if (isr & 0x11) {
siginfo.si_code = FPE_FLTINV;
} else if (isr & 0x22) {
/* denormal operand gets the same si_code as underflow
* see arch/i386/kernel/traps.c:math_error() */
siginfo.si_code = FPE_FLTUND;
} else if (isr & 0x44) {
siginfo.si_code = FPE_FLTDIV;
}
siginfo.si_isr = isr;
siginfo.si_flags = __ISR_VALID;
siginfo.si_imm = 0;
force_sig_info(SIGFPE, &siginfo, current);
}
} else {
if (exception == -1) {
printk(KERN_ERR "handle_fpu_swa: fp_emulate() returned -1\n");
return -1;
} else if (exception != 0) {
/* raise exception */
siginfo.si_signo = SIGFPE;
siginfo.si_errno = 0;
siginfo.si_code = __SI_FAULT; /* default code */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
if (isr & 0x880) {
siginfo.si_code = FPE_FLTOVF;
} else if (isr & 0x1100) {
siginfo.si_code = FPE_FLTUND;
} else if (isr & 0x2200) {
siginfo.si_code = FPE_FLTRES;
}
siginfo.si_isr = isr;
siginfo.si_flags = __ISR_VALID;
siginfo.si_imm = 0;
force_sig_info(SIGFPE, &siginfo, current);
}
}
return 0;
}
struct illegal_op_return {
unsigned long fkt, arg1, arg2, arg3;
};
struct illegal_op_return
ia64_illegal_op_fault (unsigned long ec, long arg1, long arg2, long arg3,
long arg4, long arg5, long arg6, long arg7,
struct pt_regs regs)
{
struct illegal_op_return rv;
struct siginfo si;
char buf[128];
#ifdef CONFIG_IA64_BRL_EMU
{
extern struct illegal_op_return ia64_emulate_brl (struct pt_regs *, unsigned long);
rv = ia64_emulate_brl(&regs, ec);
if (rv.fkt != (unsigned long) -1)
return rv;
}
#endif
sprintf(buf, "IA-64 Illegal operation fault");
die_if_kernel(buf, &regs, 0);
memset(&si, 0, sizeof(si));
si.si_signo = SIGILL;
si.si_code = ILL_ILLOPC;
si.si_addr = (void __user *) (regs.cr_iip + ia64_psr(&regs)->ri);
force_sig_info(SIGILL, &si, current);
rv.fkt = 0;
return rv;
}
void __kprobes
ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa,
unsigned long iim, unsigned long itir, long arg5, long arg6,
long arg7, struct pt_regs regs)
{
unsigned long code, error = isr, iip;
struct siginfo siginfo;
char buf[128];
int result, sig;
static const char *reason[] = {
"IA-64 Illegal Operation fault",
"IA-64 Privileged Operation fault",
"IA-64 Privileged Register fault",
"IA-64 Reserved Register/Field fault",
"Disabled Instruction Set Transition fault",
"Unknown fault 5", "Unknown fault 6", "Unknown fault 7", "Illegal Hazard fault",
"Unknown fault 9", "Unknown fault 10", "Unknown fault 11", "Unknown fault 12",
"Unknown fault 13", "Unknown fault 14", "Unknown fault 15"
};
if ((isr & IA64_ISR_NA) && ((isr & IA64_ISR_CODE_MASK) == IA64_ISR_CODE_LFETCH)) {
/*
* This fault was due to lfetch.fault, set "ed" bit in the psr to cancel
* the lfetch.
*/
ia64_psr(&regs)->ed = 1;
return;
}
iip = regs.cr_iip + ia64_psr(&regs)->ri;
switch (vector) {
case 24: /* General Exception */
code = (isr >> 4) & 0xf;
sprintf(buf, "General Exception: %s%s", reason[code],
(code == 3) ? ((isr & (1UL << 37))
? " (RSE access)" : " (data access)") : "");
if (code == 8) {
# ifdef CONFIG_IA64_PRINT_HAZARDS
printk("%s[%d]: possible hazard @ ip=%016lx (pr = %016lx)\n",
current->comm, current->pid,
regs.cr_iip + ia64_psr(&regs)->ri, regs.pr);
# endif
return;
}
break;
case 25: /* Disabled FP-Register */
if (isr & 2) {
disabled_fph_fault(&regs);
return;
}
sprintf(buf, "Disabled FPL fault---not supposed to happen!");
break;
case 26: /* NaT Consumption */
if (user_mode(&regs)) {
void __user *addr;
if (((isr >> 4) & 0xf) == 2) {
/* NaT page consumption */
sig = SIGSEGV;
code = SEGV_ACCERR;
addr = (void __user *) ifa;
} else {
/* register NaT consumption */
sig = SIGILL;
code = ILL_ILLOPN;
addr = (void __user *) (regs.cr_iip
+ ia64_psr(&regs)->ri);
}
siginfo.si_signo = sig;
siginfo.si_code = code;
siginfo.si_errno = 0;
siginfo.si_addr = addr;
siginfo.si_imm = vector;
siginfo.si_flags = __ISR_VALID;
siginfo.si_isr = isr;
force_sig_info(sig, &siginfo, current);
return;
} else if (ia64_done_with_exception(&regs))
return;
sprintf(buf, "NaT consumption");
break;
case 31: /* Unsupported Data Reference */
if (user_mode(&regs)) {
siginfo.si_signo = SIGILL;
siginfo.si_code = ILL_ILLOPN;
siginfo.si_errno = 0;
siginfo.si_addr = (void __user *) iip;
siginfo.si_imm = vector;
siginfo.si_flags = __ISR_VALID;
siginfo.si_isr = isr;
force_sig_info(SIGILL, &siginfo, current);
return;
}
sprintf(buf, "Unsupported data reference");
break;
case 29: /* Debug */
case 35: /* Taken Branch Trap */
case 36: /* Single Step Trap */
if (fsys_mode(current, &regs)) {
extern char __kernel_syscall_via_break[];
/*
* Got a trap in fsys-mode: Taken Branch Trap
* and Single Step trap need special handling;
* Debug trap is ignored (we disable it here
* and re-enable it in the lower-privilege trap).
*/
if (unlikely(vector == 29)) {
set_thread_flag(TIF_DB_DISABLED);
ia64_psr(&regs)->db = 0;
ia64_psr(&regs)->lp = 1;
return;
}
/* re-do the system call via break 0x100000: */
regs.cr_iip = (unsigned long) __kernel_syscall_via_break;
ia64_psr(&regs)->ri = 0;
ia64_psr(&regs)->cpl = 3;
return;
}
switch (vector) {
case 29:
siginfo.si_code = TRAP_HWBKPT;
#ifdef CONFIG_ITANIUM
/*
* Erratum 10 (IFA may contain incorrect address) now has
* "NoFix" status. There are no plans for fixing this.
*/
if (ia64_psr(&regs)->is == 0)
ifa = regs.cr_iip;
#endif
break;
case 35: siginfo.si_code = TRAP_BRANCH; ifa = 0; break;
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
case 36: siginfo.si_code = TRAP_TRACE; ifa = 0; break;
}
[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-07 20:27:13 +01:00
if (notify_die(DIE_FAULT, "ia64_fault", &regs, vector, siginfo.si_code, SIGTRAP)
== NOTIFY_STOP)
return;
siginfo.si_signo = SIGTRAP;
siginfo.si_errno = 0;
siginfo.si_addr = (void __user *) ifa;
siginfo.si_imm = 0;
siginfo.si_flags = __ISR_VALID;
siginfo.si_isr = isr;
force_sig_info(SIGTRAP, &siginfo, current);
return;
case 32: /* fp fault */
case 33: /* fp trap */
result = handle_fpu_swa((vector == 32) ? 1 : 0, &regs, isr);
if ((result < 0) || (current->thread.flags & IA64_THREAD_FPEMU_SIGFPE)) {
siginfo.si_signo = SIGFPE;
siginfo.si_errno = 0;
siginfo.si_code = FPE_FLTINV;
siginfo.si_addr = (void __user *) iip;
siginfo.si_flags = __ISR_VALID;
siginfo.si_isr = isr;
siginfo.si_imm = 0;
force_sig_info(SIGFPE, &siginfo, current);
}
return;
case 34:
if (isr & 0x2) {
/* Lower-Privilege Transfer Trap */
/* If we disabled debug traps during an fsyscall,
* re-enable them here.
*/
if (test_thread_flag(TIF_DB_DISABLED)) {
clear_thread_flag(TIF_DB_DISABLED);
ia64_psr(&regs)->db = 1;
}
/*
* Just clear PSR.lp and then return immediately:
* all the interesting work (e.g., signal delivery)
* is done in the kernel exit path.
*/
ia64_psr(&regs)->lp = 0;
return;
} else {
/* Unimplemented Instr. Address Trap */
if (user_mode(&regs)) {
siginfo.si_signo = SIGILL;
siginfo.si_code = ILL_BADIADDR;
siginfo.si_errno = 0;
siginfo.si_flags = 0;
siginfo.si_isr = 0;
siginfo.si_imm = 0;
siginfo.si_addr = (void __user *) iip;
force_sig_info(SIGILL, &siginfo, current);
return;
}
sprintf(buf, "Unimplemented Instruction Address fault");
}
break;
case 45:
#ifdef CONFIG_IA32_SUPPORT
if (ia32_exception(&regs, isr) == 0)
return;
#endif
printk(KERN_ERR "Unexpected IA-32 exception (Trap 45)\n");
printk(KERN_ERR " iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx\n",
iip, ifa, isr);
force_sig(SIGSEGV, current);
break;
case 46:
#ifdef CONFIG_IA32_SUPPORT
if (ia32_intercept(&regs, isr) == 0)
return;
#endif
printk(KERN_ERR "Unexpected IA-32 intercept trap (Trap 46)\n");
printk(KERN_ERR " iip - 0x%lx, ifa - 0x%lx, isr - 0x%lx, iim - 0x%lx\n",
iip, ifa, isr, iim);
force_sig(SIGSEGV, current);
return;
case 47:
sprintf(buf, "IA-32 Interruption Fault (int 0x%lx)", isr >> 16);
break;
default:
sprintf(buf, "Fault %lu", vector);
break;
}
die_if_kernel(buf, &regs, error);
force_sig(SIGILL, current);
}