android_kernel_motorola_sm6225/drivers/ata/pata_sil680.c

414 lines
11 KiB
C
Raw Normal View History

/*
* pata_sil680.c - SIL680 PATA for new ATA layer
* (C) 2005 Red Hat Inc
*
* based upon
*
* linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
* Documentation publically available.
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
* if necessary
*
* TODO
* If we know all our devices are LBA28 (or LBA28 sized) we could use
* the command fifo mode.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "pata_sil680"
#define DRV_VERSION "0.4.8"
#define SIL680_MMIO_BAR 5
/**
* sil680_selreg - return register base
* @hwif: interface
* @r: config offset
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
* Thankfully this is a configuration operation so isnt performance
* criticial.
*/
static unsigned long sil680_selreg(struct ata_port *ap, int r)
{
unsigned long base = 0xA0 + r;
base += (ap->port_no << 4);
return base;
}
/**
* sil680_seldev - return register base
* @hwif: interface
* @r: config offset
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
* including accounting for the unit shift.
*/
static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
{
unsigned long base = 0xA0 + r;
base += (ap->port_no << 4);
base |= adev->devno ? 2 : 0;
return base;
}
/**
* sil680_cable_detect - cable detection
* @ap: ATA port
*
* Perform cable detection. The SIL680 stores this in PCI config
* space for us.
*/
static int sil680_cable_detect(struct ata_port *ap) {
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long addr = sil680_selreg(ap, 0);
u8 ata66;
pci_read_config_byte(pdev, addr, &ata66);
if (ata66 & 1)
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
/**
* sil680_set_piomode - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
*
* Program the SIL680 registers for PIO mode. Note that the task speed
* registers are shared between the devices so we must pick the lowest
* mode for command work.
*/
static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
unsigned long addr_mask = 0x80 + 4 * ap->port_no;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int pio = adev->pio_mode - XFER_PIO_0;
int lowest_pio = pio;
int port_shift = 4 * adev->devno;
u16 reg;
u8 mode;
struct ata_device *pair = ata_dev_pair(adev);
if (pair != NULL && adev->pio_mode > pair->pio_mode)
lowest_pio = pair->pio_mode - XFER_PIO_0;
pci_write_config_word(pdev, addr, speed_p[pio]);
pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
pci_read_config_word(pdev, tfaddr-2, &reg);
pci_read_config_byte(pdev, addr_mask, &mode);
reg &= ~0x0200; /* Clear IORDY */
mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */
if (ata_pio_need_iordy(adev)) {
reg |= 0x0200; /* Enable IORDY */
mode |= 1 << port_shift;
}
pci_write_config_word(pdev, tfaddr-2, reg);
pci_write_config_byte(pdev, addr_mask, mode);
}
/**
* sil680_set_dmamode - set initial DMA mode data
* @ap: ATA interface
* @adev: ATA device
*
* Program the MWDMA/UDMA modes for the sil680 k
* chipset. The MWDMA mode values are pulled from a lookup table
* while the chipset uses mode number for UDMA.
*/
static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static u8 ultra_table[2][7] = {
{ 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */
{ 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */
};
static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long ma = sil680_seldev(ap, adev, 0x08);
unsigned long ua = sil680_seldev(ap, adev, 0x0C);
unsigned long addr_mask = 0x80 + 4 * ap->port_no;
int port_shift = adev->devno * 4;
u8 scsc, mode;
u16 multi, ultra;
pci_read_config_byte(pdev, 0x8A, &scsc);
pci_read_config_byte(pdev, addr_mask, &mode);
pci_read_config_word(pdev, ma, &multi);
pci_read_config_word(pdev, ua, &ultra);
/* Mask timing bits */
ultra &= ~0x3F;
mode &= ~(0x03 << port_shift);
/* Extract scsc */
scsc = (scsc & 0x30) ? 1: 0;
if (adev->dma_mode >= XFER_UDMA_0) {
multi = 0x10C1;
ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
mode |= (0x03 << port_shift);
} else {
multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
mode |= (0x02 << port_shift);
}
pci_write_config_byte(pdev, addr_mask, mode);
pci_write_config_word(pdev, ma, multi);
pci_write_config_word(pdev, ua, ultra);
}
static struct scsi_host_template sil680_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sil680_port_ops = {
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 04:22:49 +01:00
.inherits = &ata_bmdma_port_ops,
.cable_detect = sil680_cable_detect,
.set_piomode = sil680_set_piomode,
.set_dmamode = sil680_set_dmamode,
};
/**
* sil680_init_chip - chip setup
* @pdev: PCI device
*
* Perform all the chip setup which must be done both when the device
* is powered up on boot and when we resume in case we resumed from RAM.
* Returns the final clock settings.
*/
static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
u32 class_rev = 0;
u8 tmpbyte = 0;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
/* FIXME: double check */
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
pci_write_config_byte(pdev, 0x80, 0x00);
pci_write_config_byte(pdev, 0x84, 0x00);
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
*try_mmio = 0;
#ifdef CONFIG_PPC
if (machine_is(cell))
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
switch(tmpbyte & 0x30) {
case 0x00:
/* 133 clock attempt to force it on */
pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
break;
case 0x30:
/* if clocking is disabled */
/* 133 clock attempt to force it on */
pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
break;
case 0x10:
/* 133 already */
break;
case 0x20:
/* BIOS set PCI x2 clocking */
break;
}
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
pci_write_config_byte(pdev, 0xA1, 0x72);
pci_write_config_word(pdev, 0xA2, 0x328A);
pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
pci_write_config_dword(pdev, 0xA8, 0x43924392);
pci_write_config_dword(pdev, 0xAC, 0x40094009);
pci_write_config_byte(pdev, 0xB1, 0x72);
pci_write_config_word(pdev, 0xB2, 0x328A);
pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
pci_write_config_dword(pdev, 0xB8, 0x43924392);
pci_write_config_dword(pdev, 0xBC, 0x40094009);
switch(tmpbyte & 0x30) {
case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
/* This last case is _NOT_ ok */
case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
}
return tmpbyte & 0x30;
}
static int __devinit sil680_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
libata: clean up SFF init mess The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04 12:43:58 +02:00
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &sil680_port_ops
};
libata: clean up SFF init mess The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04 12:43:58 +02:00
static const struct ata_port_info info_slow = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA5,
.port_ops = &sil680_port_ops
};
libata: clean up SFF init mess The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04 12:43:58 +02:00
const struct ata_port_info *ppi[] = { &info, NULL };
static int printed_version;
struct ata_host *host;
void __iomem *mmio_base;
int rc, try_mmio;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
libata: clean up SFF init mess The intention of using port_mask in SFF init helpers was to eventually support exoctic configurations such as combination of legacy and native port on the same controller. This never became actually necessary and the related code always has been subtly broken one way or the other. Now that new init model is in place, there is no reason to make common helpers capable of handling all corner cases. Exotic cases can simply dealt within LLDs as necessary. This patch removes port_mask handling in SFF init helpers. SFF init helpers don't take n_ports argument and interpret it into port_mask anymore. All information is carried via port_info. n_ports argument is dropped and always two ports are allocated. LLD can tell SFF to skip certain port by marking it dummy. Note that SFF code has been treating unuvailable ports this way for a long time until recent breakage fix from Linus and is consistent with how other drivers handle with unavailable ports. This fixes 1-port legacy host handling still broken after the recent native mode fix and simplifies SFF init logic. The following changes are made... * ata_pci_init_native_host() and ata_init_legacy_host() both now try to initialized whatever they can and mark failed ports dummy. They return 0 if any port is successfully initialized. * ata_pci_prepare_native_host() and ata_pci_init_one() now doesn't take n_ports argument. All info should be specified via port_info array. Always two ports are allocated. * ata_pci_init_bmdma() exported to be used by LLDs in exotic cases. * port_info handling in all LLDs are standardized - all port_info arrays are const stack variable named ppi. Unless the second port is different from the first, its port_info is specified as NULL (tells libata that it's identical to the last non-NULL port_info). * pata_hpt37x/hpt3x2n: don't modify static variable directly. Make an on-stack copy instead as ata_piix does. * pata_uli: It has 4 ports instead of 2. Don't use ata_pci_prepare_native_host(). Allocate the host explicitly and use init helpers. It's simple enough. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04 12:43:58 +02:00
ppi[0] = &info_slow;
break;
case 0x30:
return -ENODEV;
}
if (!try_mmio)
goto use_ioports;
/* Try to acquire MMIO resources and fallback to PIO if
* that fails
*/
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
if (rc)
goto use_ioports;
/* Allocate host and set it up */
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
if (!host)
return -ENOMEM;
host->iomap = pcim_iomap_table(pdev);
/* Setup DMA masks */
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
return rc;
pci_set_master(pdev);
/* Get MMIO base and initialize port addresses */
mmio_base = host->iomap[SIL680_MMIO_BAR];
host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
ata_sff_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &sil680_sht);
use_ioports:
return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int try_mmio, rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
sil680_init_chip(pdev, &try_mmio);
ata_host_resume(host);
return 0;
}
#endif
static const struct pci_device_id sil680[] = {
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
{ },
};
static struct pci_driver sil680_pci_driver = {
.name = DRV_NAME,
.id_table = sil680,
.probe = sil680_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = sil680_reinit_one,
#endif
};
static int __init sil680_init(void)
{
return pci_register_driver(&sil680_pci_driver);
}
static void __exit sil680_exit(void)
{
pci_unregister_driver(&sil680_pci_driver);
}
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for SI680 PATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sil680);
MODULE_VERSION(DRV_VERSION);
module_init(sil680_init);
module_exit(sil680_exit);