asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/include/asm-arm/arch-imx/imx-regs.h

483 lines
21 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#ifndef _IMX_REGS_H
#define _IMX_REGS_H
/* ------------------------------------------------------------------------
* Motorola IMX system registers
* ------------------------------------------------------------------------
*
*/
/*
* Register BASEs, based on OFFSETs
*
*/
#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
/* PLL registers */
#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
[ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support Support to change MX1 CPU frequency at runtime. Tested on PiKRON's PiMX1 board and seems to be fully stable up to 200 MHz end even as low as 8 MHz. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-06 17:25:04 +01:00
#define CSCR_SPLL_RESTART (1<<22)
#define CSCR_MPLL_RESTART (1<<21)
#define CSCR_SYSTEM_SEL (1<<16)
#define CSCR_BCLK_DIV (0xf<<10)
#define CSCR_MPU_PRESC (1<<15)
#define CSCR_SPEN (1<<1)
#define CSCR_MPEN (1<<0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
/*
* GPIO Module and I/O Multiplexer
* x = 0..3 for reg_A, reg_B, reg_C, reg_D
*/
#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
[ARM] 4373/1: i.MX/MX1 GPIO support implementation Support for generic input output for MX1 family. The implementation prevents allocation of one pin by two users, but does not store pointer to the user description permanently, because this solution would have bigger memory overhead. The simple way to integrate code with per BSP pins setup and allocation is required else all GPIO registration checking is useless. The function imx_gpio_setup_multiple_pins() can be used for this purpose in future. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-12 15:31:17 +02:00
#define GPIO_PORT_MAX 3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define GPIO_PIN_MASK 0x1f
#define GPIO_PORT_MASK (0x3 << 5)
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define GPIO_PORT_SHIFT 5
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define GPIO_PORTA (0<<5)
#define GPIO_PORTB (1<<5)
#define GPIO_PORTC (2<<5)
#define GPIO_PORTD (3<<5)
#define GPIO_OUT (1<<7)
#define GPIO_IN (0<<7)
#define GPIO_PUEN (1<<8)
#define GPIO_PF (0<<9)
#define GPIO_AF (1<<9)
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define GPIO_OCR_SHIFT 10
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define GPIO_OCR_MASK (3<<10)
#define GPIO_AIN (0<<10)
#define GPIO_BIN (1<<10)
#define GPIO_CIN (2<<10)
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define GPIO_DR (3<<10)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define GPIO_AOUT_SHIFT 12
#define GPIO_AOUT_MASK (3<<12)
#define GPIO_AOUT (0<<12)
#define GPIO_AOUT_ISR (1<<12)
#define GPIO_AOUT_0 (2<<12)
#define GPIO_AOUT_1 (3<<12)
#define GPIO_BOUT_SHIFT 14
#define GPIO_BOUT_MASK (3<<14)
#define GPIO_BOUT (0<<14)
#define GPIO_BOUT_ISR (1<<14)
#define GPIO_BOUT_0 (2<<14)
#define GPIO_BOUT_1 (3<<14)
#define GPIO_GIUS (1<<16)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/* assignements for GPIO alternate/primary functions */
/* FIXME: This list is not completed. The correct directions are
* missing on some (many) pins
*/
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
[ARM] 2958/1: fix definition in imx-regs.h Patch from Sascha Hauer Fix PD7_AF_UART2_DTR definition Signed-off-by: Giancarlo Formicuccia <gformicuccia@atinno.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-10 11:17:43 +02:00
#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
[ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-05 00:17:52 +02:00
#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
[PATCH] ARM: 2666/1: i.MX pwm controller defines Patch from Sascha Hauer This patch adds the defines for the i.MX PWM controller Signed-off-by: Steven Scholz Signed-off-by: Sascha Hauer Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-10 20:01:35 +02:00
/*
* PWM controller
*/
#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
#define PWMC_SWR (0x01<<16) /* Software Reset */
#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* DMA Controller
*/
#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
include files: convert "include" subdirectory to UTF-8 Convert the "include" subdirectory to UTF-8. Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:30:57 +02:00
#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
#define DCR_DRST (1<<1)
#define DCR_DEN (1<<0)
#define DBTOCR_EN (1<<15)
#define DBTOCR_CNT(x) ((x) & 0x7fff )
#define CNTR_CNT(x) ((x) & 0xffffff )
#define CCR_DMOD_LINEAR ( 0x0 << 12 )
#define CCR_DMOD_2D ( 0x1 << 12 )
#define CCR_DMOD_FIFO ( 0x2 << 12 )
#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
#define CCR_SMOD_LINEAR ( 0x0 << 10 )
#define CCR_SMOD_2D ( 0x1 << 10 )
#define CCR_SMOD_FIFO ( 0x2 << 10 )
#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
#define CCR_MDIR_DEC (1<<9)
#define CCR_MSEL_B (1<<8)
#define CCR_DSIZ_32 ( 0x0 << 6 )
#define CCR_DSIZ_8 ( 0x1 << 6 )
#define CCR_DSIZ_16 ( 0x2 << 6 )
#define CCR_SSIZ_32 ( 0x0 << 4 )
#define CCR_SSIZ_8 ( 0x1 << 4 )
#define CCR_SSIZ_16 ( 0x2 << 4 )
#define CCR_REN (1<<3)
#define CCR_RPT (1<<2)
#define CCR_FRC (1<<1)
#define CCR_CEN (1<<0)
#define RTOR_EN (1<<15)
#define RTOR_CLK (1<<14)
#define RTOR_PSC (1<<13)
/*
* Interrupt controller
*/
#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00)
#define INTCNTL_FIAD (1<<19)
#define INTCNTL_NIAD (1<<20)
#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04)
#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08)
#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c)
#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10)
#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14)
/*
* General purpose timers
*/
#define IMX_TCTL(x) __REG( 0x00 + (x))
#define TCTL_SWR (1<<15)
#define TCTL_FRR (1<<8)
#define TCTL_CAP_RIS (1<<6)
#define TCTL_CAP_FAL (2<<6)
#define TCTL_CAP_RIS_FAL (3<<6)
#define TCTL_OM (1<<5)
#define TCTL_IRQEN (1<<4)
#define TCTL_CLK_PCLK1 (1<<1)
#define TCTL_CLK_PCLK1_16 (2<<1)
#define TCTL_CLK_TIN (3<<1)
#define TCTL_CLK_32 (4<<1)
#define TCTL_TEN (1<<0)
#define IMX_TPRER(x) __REG( 0x04 + (x))
#define IMX_TCMP(x) __REG( 0x08 + (x))
#define IMX_TCR(x) __REG( 0x0C + (x))
#define IMX_TCN(x) __REG( 0x10 + (x))
#define IMX_TSTAT(x) __REG( 0x14 + (x))
#define TSTAT_CAPT (1<<1)
#define TSTAT_COMP (1<<0)
/*
* LCD Controller
*/
#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00)
#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04)
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
#define SIZE_YMAX(y) ( (y) & 0x1ff )
#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08)
#define VPW_VPW(x) ( (x) & 0x3ff )
#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C)
#define CPOS_CC1 (1<<31)
#define CPOS_CC0 (1<<30)
#define CPOS_OP (1<<28)
#define CPOS_CXP(x) (((x) & 3ff) << 16)
#define CPOS_CYP(y) ((y) & 0x1ff)
#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10)
#define LCWHB_BK_EN (1<<31)
#define LCWHB_CW(w) (((w) & 0x1f) << 24)
#define LCWHB_CH(h) (((h) & 0x1f) << 16)
#define LCWHB_BD(x) ((x) & 0xff)
#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14)
#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18)
#define PCR_TFT (1<<31)
#define PCR_COLOR (1<<30)
#define PCR_PBSIZ_1 (0<<28)
#define PCR_PBSIZ_2 (1<<28)
#define PCR_PBSIZ_4 (2<<28)
#define PCR_PBSIZ_8 (3<<28)
#define PCR_BPIX_1 (0<<25)
#define PCR_BPIX_2 (1<<25)
#define PCR_BPIX_4 (2<<25)
#define PCR_BPIX_8 (3<<25)
#define PCR_BPIX_12 (4<<25)
#define PCR_BPIX_16 (4<<25)
#define PCR_PIXPOL (1<<24)
#define PCR_FLMPOL (1<<23)
#define PCR_LPPOL (1<<22)
#define PCR_CLKPOL (1<<21)
#define PCR_OEPOL (1<<20)
#define PCR_SCLKIDLE (1<<19)
#define PCR_END_SEL (1<<18)
#define PCR_END_BYTE_SWAP (1<<17)
#define PCR_REV_VS (1<<16)
#define PCR_ACD_SEL (1<<15)
#define PCR_ACD(x) (((x) & 0x7f) << 8)
#define PCR_SCLK_SEL (1<<7)
#define PCR_SHARP (1<<6)
#define PCR_PCD(x) ((x) & 0x3f)
#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C)
#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26)
#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
#define HCR_H_WAIT_2(x) ((x) & 0xff)
#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20)
#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26)
#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
#define VCR_V_WAIT_2(x) ((x) & 0xff)
#define LCDC_POS __REG(IMX_LCDC_BASE+0x24)
#define POS_POS(x) ((x) & 1f)
#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28)
#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26)
#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16)
#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
#define LSCR1_GRAY2(x) (((x) & 0xf) << 4)
#define LSCR1_GRAY1(x) (((x) & 0xf))
#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C)
#define PWMR_CLS(x) (((x) & 0x1ff) << 16)
#define PWMR_LDMSK (1<<15)
#define PWMR_SCR1 (1<<10)
#define PWMR_SCR0 (1<<9)
#define PWMR_CC_EN (1<<8)
#define PWMR_PW(x) ((x) & 0xff)
#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30)
#define DMACR_BURST (1<<31)
#define DMACR_HM(x) (((x) & 0xf) << 16)
#define DMACR_TM(x) ((x) &0xf)
#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34)
#define RMCR_LCDC_EN (1<<1)
#define RMCR_SELF_REF (1<<0)
#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38)
#define LCDICR_INT_SYN (1<<2)
#define LCDICR_INT_CON (1)
#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40)
#define LCDISR_UDR_ERR (1<<3)
#define LCDISR_ERR_RES (1<<2)
#define LCDISR_EOF (1<<1)
#define LCDISR_BOF (1<<0)
#endif // _IMX_REGS_H
Reference in a new issue Copy permalink