android_kernel_motorola_sm6225/arch/powerpc/kernel/setup_64.c

624 lines
16 KiB
C
Raw Normal View History

/*
*
* Common boot and setup code.
*
* Copyright (C) 2001 PPC64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/tty.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
[PATCH] powerpc/64: per cpu data optimisations The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 03:16:44 +01:00
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/lockdep.h>
#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
#include <asm/kexec.h>
#include "setup.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
int have_of = 1;
int boot_cpuid = 0;
u64 ppc64_pft_size;
/* Pick defaults since we might want to patch instructions
* before we've read this from the device tree.
*/
struct ppc64_caches ppc64_caches = {
.dline_size = 0x40,
.log_dline_size = 6,
.iline_size = 0x40,
.log_iline_size = 6
};
EXPORT_SYMBOL_GPL(ppc64_caches);
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
*/
int dcache_bsize;
int icache_bsize;
int ucache_bsize;
#ifdef CONFIG_SMP
static int smt_enabled_cmdline;
/* Look for ibm,smt-enabled OF option */
static void check_smt_enabled(void)
{
struct device_node *dn;
const char *smt_option;
/* Allow the command line to overrule the OF option */
if (smt_enabled_cmdline)
return;
dn = of_find_node_by_path("/options");
if (dn) {
smt_option = of_get_property(dn, "ibm,smt-enabled", NULL);
if (smt_option) {
if (!strcmp(smt_option, "on"))
smt_enabled_at_boot = 1;
else if (!strcmp(smt_option, "off"))
smt_enabled_at_boot = 0;
}
}
}
/* Look for smt-enabled= cmdline option */
static int __init early_smt_enabled(char *p)
{
smt_enabled_cmdline = 1;
if (!p)
return 0;
if (!strcmp(p, "on") || !strcmp(p, "1"))
smt_enabled_at_boot = 1;
else if (!strcmp(p, "off") || !strcmp(p, "0"))
smt_enabled_at_boot = 0;
return 0;
}
early_param("smt-enabled", early_smt_enabled);
#else
#define check_smt_enabled()
#endif /* CONFIG_SMP */
/* Put the paca pointer into r13 and SPRG3 */
void __init setup_paca(int cpu)
{
local_paca = &paca[cpu];
mtspr(SPRN_SPRG3, local_paca);
}
/*
* Early initialization entry point. This is called by head.S
* with MMU translation disabled. We rely on the "feature" of
* the CPU that ignores the top 2 bits of the address in real
* mode so we can access kernel globals normally provided we
* only toy with things in the RMO region. From here, we do
* some early parsing of the device-tree to setup out LMB
* data structures, and allocate & initialize the hash table
* and segment tables so we can start running with translation
* enabled.
*
* It is this function which will call the probe() callback of
* the various platform types and copy the matching one to the
* global ppc_md structure. Your platform can eventually do
* some very early initializations from the probe() routine, but
* this is not recommended, be very careful as, for example, the
* device-tree is not accessible via normal means at this point.
*/
void __init early_setup(unsigned long dt_ptr)
{
/* -------- printk is _NOT_ safe to use here ! ------- */
/* Fill in any unititialised pacas */
initialise_pacas();
/* Identify CPU type */
identify_cpu(0, mfspr(SPRN_PVR));
/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
setup_paca(0);
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
/* Initialize lockdep early or else spinlocks will blow */
lockdep_init();
/* -------- printk is now safe to use ------- */
DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
* Do early initialization using the flattened device
* tree, such as retrieving the physical memory map or
* calculating/retrieving the hash table size.
*/
early_init_devtree(__va(dt_ptr));
/* Now we know the logical id of our boot cpu, setup the paca. */
setup_paca(boot_cpuid);
/* Fix up paca fields required for the boot cpu */
get_paca()->cpu_start = 1;
get_paca()->stab_real = __pa((u64)&initial_stab);
get_paca()->stab_addr = (u64)&initial_stab;
/* Probe the machine type */
probe_machine();
setup_kdump_trampoline();
DBG("Found, Initializing memory management...\n");
/*
* Initialize the MMU Hash table and create the linear mapping
* of memory. Has to be done before stab/slb initialization as
* this is currently where the page size encoding is obtained
*/
htab_initialize();
/*
* Initialize stab / SLB management except on iSeries
*/
if (cpu_has_feature(CPU_FTR_SLB))
slb_initialize();
else if (!firmware_has_feature(FW_FEATURE_ISERIES))
stab_initialize(get_paca()->stab_real);
DBG(" <- early_setup()\n");
}
#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
struct paca_struct *lpaca = get_paca();
/* Mark interrupts enabled in PACA */
lpaca->soft_enabled = 0;
/* Initialize hash table for that CPU */
htab_initialize_secondary();
/* Initialize STAB/SLB. We use a virtual address as it works
* in real mode on pSeries and we want a virutal address on
* iSeries anyway
*/
if (cpu_has_feature(CPU_FTR_SLB))
slb_initialize();
else
stab_initialize(lpaca->stab_addr);
}
#endif /* CONFIG_SMP */
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
void smp_release_cpus(void)
{
extern unsigned long __secondary_hold_spinloop;
unsigned long *ptr;
DBG(" -> smp_release_cpus()\n");
/* All secondary cpus are spinning on a common spinloop, release them
* all now so they can start to spin on their individual paca
* spinloops. For non SMP kernels, the secondary cpus never get out
* of the common spinloop.
* This is useless but harmless on iSeries, secondaries are already
* waiting on their paca spinloops. */
ptr = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
- PHYSICAL_START);
*ptr = 1;
mb();
DBG(" <- smp_release_cpus()\n");
}
#endif /* CONFIG_SMP || CONFIG_KEXEC */
/*
* Initialize some remaining members of the ppc64_caches and systemcfg
* structures
* (at least until we get rid of them completely). This is mostly some
* cache informations about the CPU that will be used by cache flush
* routines and/or provided to userland
*/
static void __init initialize_cache_info(void)
{
struct device_node *np;
unsigned long num_cpus = 0;
DBG(" -> initialize_cache_info()\n");
for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
num_cpus += 1;
/* We're assuming *all* of the CPUs have the same
* d-cache and i-cache sizes... -Peter
*/
if ( num_cpus == 1 ) {
const u32 *sizep, *lsizep;
u32 size, lsize;
size = 0;
lsize = cur_cpu_spec->dcache_bsize;
sizep = of_get_property(np, "d-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
lsizep = of_get_property(np, "d-cache-block-size", NULL);
/* fallback if block size missing */
if (lsizep == NULL)
lsizep = of_get_property(np, "d-cache-line-size", NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
DBG("Argh, can't find dcache properties ! "
"sizep: %p, lsizep: %p\n", sizep, lsizep);
ppc64_caches.dsize = size;
ppc64_caches.dline_size = lsize;
ppc64_caches.log_dline_size = __ilog2(lsize);
ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;
size = 0;
lsize = cur_cpu_spec->icache_bsize;
sizep = of_get_property(np, "i-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
lsizep = of_get_property(np, "i-cache-block-size", NULL);
if (lsizep == NULL)
lsizep = of_get_property(np, "i-cache-line-size", NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
DBG("Argh, can't find icache properties ! "
"sizep: %p, lsizep: %p\n", sizep, lsizep);
ppc64_caches.isize = size;
ppc64_caches.iline_size = lsize;
ppc64_caches.log_iline_size = __ilog2(lsize);
ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
}
}
DBG(" <- initialize_cache_info()\n");
}
/*
* Do some initial setup of the system. The parameters are those which
* were passed in from the bootloader.
*/
void __init setup_system(void)
{
DBG(" -> setup_system()\n");
/* Apply the CPUs-specific and firmware specific fixups to kernel
* text (nop out sections not relevant to this CPU or this firmware)
*/
[POWERPC] Support feature fixups in vdso's This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-20 03:47:18 +02:00
do_feature_fixups(cur_cpu_spec->cpu_features,
&__start___ftr_fixup, &__stop___ftr_fixup);
do_feature_fixups(powerpc_firmware_features,
&__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
/*
* Unflatten the device-tree passed by prom_init or kexec
*/
unflatten_device_tree();
/*
* Fill the ppc64_caches & systemcfg structures with informations
2006-07-03 13:36:01 +02:00
* retrieved from the device-tree.
*/
initialize_cache_info();
2006-07-03 13:36:01 +02:00
/*
* Initialize irq remapping subsystem
*/
irq_early_init();
#ifdef CONFIG_PPC_RTAS
/*
* Initialize RTAS if available
*/
rtas_initialize();
#endif /* CONFIG_PPC_RTAS */
/*
* Check if we have an initrd provided via the device-tree
*/
check_for_initrd();
/*
* Do some platform specific early initializations, that includes
* setting up the hash table pointers. It also sets up some interrupt-mapping
* related options that will be used by finish_device_tree()
*/
if (ppc_md.init_early)
ppc_md.init_early();
/*
* We can discover serial ports now since the above did setup the
* hash table management for us, thus ioremap works. We do that early
* so that further code can be debugged
*/
find_legacy_serial_ports();
/*
* Register early console
*/
register_early_udbg_console();
/*
* Initialize xmon
*/
xmon_setup();
check_smt_enabled();
smp_setup_cpu_maps();
#ifdef CONFIG_SMP
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
smp_release_cpus();
#endif
printk("Starting Linux PPC64 %s\n", init_utsname()->version);
printk("-----------------------------------------------------\n");
printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size);
printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size());
if (ppc64_caches.dline_size != 0x80)
printk("ppc64_caches.dcache_line_size = 0x%x\n",
ppc64_caches.dline_size);
if (ppc64_caches.iline_size != 0x80)
printk("ppc64_caches.icache_line_size = 0x%x\n",
ppc64_caches.iline_size);
if (htab_address)
printk("htab_address = 0x%p\n", htab_address);
printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
#if PHYSICAL_START > 0
[POWERPC] 85xx: Add support for relocatable kernel (and booting at non-zero) Added support to allow an 85xx kernel to be run from a non-zero physical address (useful for cooperative asymmetric multiprocessing situations and kdump). The support can be configured at compile time by setting CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as desired. Alternatively, the kernel build can set CONFIG_RELOCATABLE. Setting this config option causes the kernel to determine at runtime the physical addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START. If CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning. However, CONFIG_PHYSICAL_START will always be used to set the LOAD program header physical address field in the resulting ELF image. Currently we are limited to running at a physical address that is a multiple of 256M. This is due to how we map TLBs to cover lowmem. This should be fixed to allow 64M or maybe even 16M alignment in the future. It is considered an error to try and run a kernel at a non-aligned physical address. All the magic for this support is accomplished by proper initialization of the kernel memory subsystem and use of ARCH_PFN_OFFSET. The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings. ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET. /dev/mem continues to allow access to any physical address in the system regardless of how CONFIG_PHYSICAL_START is set. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-21 20:22:34 +02:00
printk("physical_start = 0x%lx\n", PHYSICAL_START);
#endif
printk("-----------------------------------------------------\n");
DBG(" <- setup_system()\n");
}
#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
unsigned int i;
/*
* interrupt stacks must be under 256MB, we cannot afford to take
* SLB misses on them.
*/
for_each_possible_cpu(i) {
softirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
hardirq_ctx[i] = (struct thread_info *)
__va(lmb_alloc_base(THREAD_SIZE,
THREAD_SIZE, 0x10000000));
}
}
#else
#define irqstack_early_init()
#endif
/*
* Stack space used when we detect a bad kernel stack pointer, and
* early in SMP boots before relocation is enabled.
*/
static void __init emergency_stack_init(void)
{
unsigned long limit;
unsigned int i;
/*
* Emergency stacks must be under 256MB, we cannot afford to take
* SLB misses on them. The ABI also requires them to be 128-byte
* aligned.
*
* Since we use these as temporary stacks during secondary CPU
* bringup, we need to get at them in real mode. This means they
* must also be within the RMO region.
*/
limit = min(0x10000000UL, lmb.rmo_size);
for_each_possible_cpu(i) {
unsigned long sp;
sp = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
sp += THREAD_SIZE;
paca[i].emergency_sp = __va(sp);
}
}
/*
* Called into from start_kernel, after lock_kernel has been called.
* Initializes bootmem, which is unsed to manage page allocation until
* mem_init is called.
*/
void __init setup_arch(char **cmdline_p)
{
ppc64_boot_msg(0x12, "Setup Arch");
*cmdline_p = cmd_line;
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
* for a possibly more accurate value.
*/
dcache_bsize = ppc64_caches.dline_size;
icache_bsize = ppc64_caches.iline_size;
/* reboot on panic */
panic_timeout = 180;
if (ppc_md.panic)
setup_panic();
init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
irqstack_early_init();
emergency_stack_init();
stabs_alloc();
/* set up the bootmem stuff with available memory */
do_init_bootmem();
sparse_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
if (ppc_md.setup_arch)
ppc_md.setup_arch();
paging_init();
ppc64_boot_msg(0x15, "Setup Done");
}
/* ToDo: do something useful if ppc_md is not yet setup. */
#define PPC64_LINUX_FUNCTION 0x0f000000
#define PPC64_IPL_MESSAGE 0xc0000000
#define PPC64_TERM_MESSAGE 0xb0000000
static void ppc64_do_msg(unsigned int src, const char *msg)
{
if (ppc_md.progress) {
char buf[128];
sprintf(buf, "%08X\n", src);
ppc_md.progress(buf, 0);
snprintf(buf, 128, "%s", msg);
ppc_md.progress(buf, 0);
}
}
/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg)
{
ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
printk("[boot]%04x %s\n", src, msg);
}
/* Print a termination message (print only -- does not stop the kernel) */
void ppc64_terminate_msg(unsigned int src, const char *msg)
{
ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg);
printk("[terminate]%04x %s\n", src, msg);
}
void cpu_die(void)
{
if (ppc_md.cpu_die)
ppc_md.cpu_die();
}
[PATCH] powerpc/64: per cpu data optimisations The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 03:16:44 +01:00
#ifdef CONFIG_SMP
void __init setup_per_cpu_areas(void)
{
int i;
unsigned long size;
char *ptr;
/* Copy section for each CPU (we discard the original) */
size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
[PATCH] powerpc/64: per cpu data optimisations The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 03:16:44 +01:00
#ifdef CONFIG_MODULES
if (size < PERCPU_ENOUGH_ROOM)
size = PERCPU_ENOUGH_ROOM;
#endif
for_each_possible_cpu(i) {
ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
[PATCH] powerpc/64: per cpu data optimisations The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 03:16:44 +01:00
if (!ptr)
panic("Cannot allocate cpu data for CPU %d\n", i);
paca[i].data_offset = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
}
/* Now that per_cpu is setup, initialize cpu_sibling_map */
smp_setup_cpu_sibling_map();
[PATCH] powerpc/64: per cpu data optimisations The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 03:16:44 +01:00
}
#endif
[POWERPC] Allow hooking of PCI MMIO & PIO accessors on 64 bits This patch reworks the way iSeries hooks on PCI IO operations (both MMIO and PIO) and provides a generic way for other platforms to do so (we have need to do that for various other platforms). While reworking the IO ops, I ended up doing some spring cleaning in io.h and eeh.h which I might want to split into 2 or 3 patches (among others, eeh.h had a lot of useless stuff in it). A side effect is that EEH for PIO should work now (it used to pass IO ports down to the eeh address check functions which is bogus). Also, new are MMIO "repeat" ops, which other archs like ARM already had, and that we have too now: readsb, readsw, readsl, writesb, writesw, writesl. In the long run, I might also make EEH use the hooks instead of wrapping at the toplevel, which would make things even cleaner and relegate EEH completely in platforms/iseries, but we have to measure the performance impact there (though it's really only on MMIO reads) Since I also need to hook on ioremap, I shuffled the functions a bit there. I introduced ioremap_flags() to use by drivers who want to pass explicit flags to ioremap (and it can be hooked). The old __ioremap() is still there as a low level and cannot be hooked, thus drivers who use it should migrate unless they know they want the low level version. The patch "arch provides generic iomap missing accessors" (should be number 4 in this series) is a pre-requisite to provide full iomap API support with this patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 07:25:10 +01:00
#ifdef CONFIG_PPC_INDIRECT_IO
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif /* CONFIG_PPC_INDIRECT_IO */