android_kernel_motorola_sm6225/kernel/sys.c

1784 lines
42 KiB
C
Raw Normal View History

/*
* linux/kernel/sys.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/mman.h>
#include <linux/smp_lock.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/prctl.h>
#include <linux/init.h>
#include <linux/highuid.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/kexec.h>
#include <linux/workqueue.h>
#include <linux/device.h>
#include <linux/key.h>
#include <linux/times.h>
#include <linux/posix-timers.h>
#include <linux/security.h>
#include <linux/dcookies.h>
#include <linux/suspend.h>
#include <linux/tty.h>
#include <linux/signal.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/unistd.h>
#ifndef SET_UNALIGN_CTL
# define SET_UNALIGN_CTL(a,b) (-EINVAL)
#endif
#ifndef GET_UNALIGN_CTL
# define GET_UNALIGN_CTL(a,b) (-EINVAL)
#endif
#ifndef SET_FPEMU_CTL
# define SET_FPEMU_CTL(a,b) (-EINVAL)
#endif
#ifndef GET_FPEMU_CTL
# define GET_FPEMU_CTL(a,b) (-EINVAL)
#endif
#ifndef SET_FPEXC_CTL
# define SET_FPEXC_CTL(a,b) (-EINVAL)
#endif
#ifndef GET_FPEXC_CTL
# define GET_FPEXC_CTL(a,b) (-EINVAL)
#endif
/*
* this is where the system-wide overflow UID and GID are defined, for
* architectures that now have 32-bit UID/GID but didn't in the past
*/
int overflowuid = DEFAULT_OVERFLOWUID;
int overflowgid = DEFAULT_OVERFLOWGID;
#ifdef CONFIG_UID16
EXPORT_SYMBOL(overflowuid);
EXPORT_SYMBOL(overflowgid);
#endif
/*
* the same as above, but for filesystems which can only store a 16-bit
* UID and GID. as such, this is needed on all architectures
*/
int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
EXPORT_SYMBOL(fs_overflowuid);
EXPORT_SYMBOL(fs_overflowgid);
/*
* this indicates whether you can reboot with ctrl-alt-del: the default is yes
*/
int C_A_D = 1;
int cad_pid = 1;
/*
* Notifier list for kernel code which wants to be called
* at shutdown. This is used to stop any idling DMA operations
* and the like.
*/
static struct notifier_block *reboot_notifier_list;
static DEFINE_RWLOCK(notifier_lock);
/**
* notifier_chain_register - Add notifier to a notifier chain
* @list: Pointer to root list pointer
* @n: New entry in notifier chain
*
* Adds a notifier to a notifier chain.
*
* Currently always returns zero.
*/
int notifier_chain_register(struct notifier_block **list, struct notifier_block *n)
{
write_lock(&notifier_lock);
while(*list)
{
if(n->priority > (*list)->priority)
break;
list= &((*list)->next);
}
n->next = *list;
*list=n;
write_unlock(&notifier_lock);
return 0;
}
EXPORT_SYMBOL(notifier_chain_register);
/**
* notifier_chain_unregister - Remove notifier from a notifier chain
* @nl: Pointer to root list pointer
* @n: New entry in notifier chain
*
* Removes a notifier from a notifier chain.
*
* Returns zero on success, or %-ENOENT on failure.
*/
int notifier_chain_unregister(struct notifier_block **nl, struct notifier_block *n)
{
write_lock(&notifier_lock);
while((*nl)!=NULL)
{
if((*nl)==n)
{
*nl=n->next;
write_unlock(&notifier_lock);
return 0;
}
nl=&((*nl)->next);
}
write_unlock(&notifier_lock);
return -ENOENT;
}
EXPORT_SYMBOL(notifier_chain_unregister);
/**
* notifier_call_chain - Call functions in a notifier chain
* @n: Pointer to root pointer of notifier chain
* @val: Value passed unmodified to notifier function
* @v: Pointer passed unmodified to notifier function
*
* Calls each function in a notifier chain in turn.
*
* If the return value of the notifier can be and'd
* with %NOTIFY_STOP_MASK, then notifier_call_chain
* will return immediately, with the return value of
* the notifier function which halted execution.
* Otherwise, the return value is the return value
* of the last notifier function called.
*/
int notifier_call_chain(struct notifier_block **n, unsigned long val, void *v)
{
int ret=NOTIFY_DONE;
struct notifier_block *nb = *n;
while(nb)
{
ret=nb->notifier_call(nb,val,v);
if(ret&NOTIFY_STOP_MASK)
{
return ret;
}
nb=nb->next;
}
return ret;
}
EXPORT_SYMBOL(notifier_call_chain);
/**
* register_reboot_notifier - Register function to be called at reboot time
* @nb: Info about notifier function to be called
*
* Registers a function with the list of functions
* to be called at reboot time.
*
* Currently always returns zero, as notifier_chain_register
* always returns zero.
*/
int register_reboot_notifier(struct notifier_block * nb)
{
return notifier_chain_register(&reboot_notifier_list, nb);
}
EXPORT_SYMBOL(register_reboot_notifier);
/**
* unregister_reboot_notifier - Unregister previously registered reboot notifier
* @nb: Hook to be unregistered
*
* Unregisters a previously registered reboot
* notifier function.
*
* Returns zero on success, or %-ENOENT on failure.
*/
int unregister_reboot_notifier(struct notifier_block * nb)
{
return notifier_chain_unregister(&reboot_notifier_list, nb);
}
EXPORT_SYMBOL(unregister_reboot_notifier);
static int set_one_prio(struct task_struct *p, int niceval, int error)
{
int no_nice;
if (p->uid != current->euid &&
p->euid != current->euid && !capable(CAP_SYS_NICE)) {
error = -EPERM;
goto out;
}
if (niceval < task_nice(p) && !can_nice(p, niceval)) {
error = -EACCES;
goto out;
}
no_nice = security_task_setnice(p, niceval);
if (no_nice) {
error = no_nice;
goto out;
}
if (error == -ESRCH)
error = 0;
set_user_nice(p, niceval);
out:
return error;
}
asmlinkage long sys_setpriority(int which, int who, int niceval)
{
struct task_struct *g, *p;
struct user_struct *user;
int error = -EINVAL;
if (which > 2 || which < 0)
goto out;
/* normalize: avoid signed division (rounding problems) */
error = -ESRCH;
if (niceval < -20)
niceval = -20;
if (niceval > 19)
niceval = 19;
read_lock(&tasklist_lock);
switch (which) {
case PRIO_PROCESS:
if (!who)
who = current->pid;
p = find_task_by_pid(who);
if (p)
error = set_one_prio(p, niceval, error);
break;
case PRIO_PGRP:
if (!who)
who = process_group(current);
do_each_task_pid(who, PIDTYPE_PGID, p) {
error = set_one_prio(p, niceval, error);
} while_each_task_pid(who, PIDTYPE_PGID, p);
break;
case PRIO_USER:
user = current->user;
if (!who)
who = current->uid;
else
if ((who != current->uid) && !(user = find_user(who)))
goto out_unlock; /* No processes for this user */
do_each_thread(g, p)
if (p->uid == who)
error = set_one_prio(p, niceval, error);
while_each_thread(g, p);
if (who != current->uid)
free_uid(user); /* For find_user() */
break;
}
out_unlock:
read_unlock(&tasklist_lock);
out:
return error;
}
/*
* Ugh. To avoid negative return values, "getpriority()" will
* not return the normal nice-value, but a negated value that
* has been offset by 20 (ie it returns 40..1 instead of -20..19)
* to stay compatible.
*/
asmlinkage long sys_getpriority(int which, int who)
{
struct task_struct *g, *p;
struct user_struct *user;
long niceval, retval = -ESRCH;
if (which > 2 || which < 0)
return -EINVAL;
read_lock(&tasklist_lock);
switch (which) {
case PRIO_PROCESS:
if (!who)
who = current->pid;
p = find_task_by_pid(who);
if (p) {
niceval = 20 - task_nice(p);
if (niceval > retval)
retval = niceval;
}
break;
case PRIO_PGRP:
if (!who)
who = process_group(current);
do_each_task_pid(who, PIDTYPE_PGID, p) {
niceval = 20 - task_nice(p);
if (niceval > retval)
retval = niceval;
} while_each_task_pid(who, PIDTYPE_PGID, p);
break;
case PRIO_USER:
user = current->user;
if (!who)
who = current->uid;
else
if ((who != current->uid) && !(user = find_user(who)))
goto out_unlock; /* No processes for this user */
do_each_thread(g, p)
if (p->uid == who) {
niceval = 20 - task_nice(p);
if (niceval > retval)
retval = niceval;
}
while_each_thread(g, p);
if (who != current->uid)
free_uid(user); /* for find_user() */
break;
}
out_unlock:
read_unlock(&tasklist_lock);
return retval;
}
/*
* Reboot system call: for obvious reasons only root may call it,
* and even root needs to set up some magic numbers in the registers
* so that some mistake won't make this reboot the whole machine.
* You can also set the meaning of the ctrl-alt-del-key here.
*
* reboot doesn't sync: do that yourself before calling this.
*/
asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
{
char buffer[256];
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT))
return -EPERM;
/* For safety, we require "magic" arguments. */
if (magic1 != LINUX_REBOOT_MAGIC1 ||
(magic2 != LINUX_REBOOT_MAGIC2 &&
magic2 != LINUX_REBOOT_MAGIC2A &&
magic2 != LINUX_REBOOT_MAGIC2B &&
magic2 != LINUX_REBOOT_MAGIC2C))
return -EINVAL;
lock_kernel();
switch (cmd) {
case LINUX_REBOOT_CMD_RESTART:
notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
system_state = SYSTEM_RESTART;
device_shutdown();
printk(KERN_EMERG "Restarting system.\n");
machine_restart(NULL);
break;
case LINUX_REBOOT_CMD_CAD_ON:
C_A_D = 1;
break;
case LINUX_REBOOT_CMD_CAD_OFF:
C_A_D = 0;
break;
case LINUX_REBOOT_CMD_HALT:
notifier_call_chain(&reboot_notifier_list, SYS_HALT, NULL);
system_state = SYSTEM_HALT;
device_suspend(PMSG_SUSPEND);
device_shutdown();
printk(KERN_EMERG "System halted.\n");
machine_halt();
unlock_kernel();
do_exit(0);
break;
case LINUX_REBOOT_CMD_POWER_OFF:
notifier_call_chain(&reboot_notifier_list, SYS_POWER_OFF, NULL);
system_state = SYSTEM_POWER_OFF;
device_suspend(PMSG_SUSPEND);
device_shutdown();
printk(KERN_EMERG "Power down.\n");
machine_power_off();
unlock_kernel();
do_exit(0);
break;
case LINUX_REBOOT_CMD_RESTART2:
if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
unlock_kernel();
return -EFAULT;
}
buffer[sizeof(buffer) - 1] = '\0';
notifier_call_chain(&reboot_notifier_list, SYS_RESTART, buffer);
system_state = SYSTEM_RESTART;
device_suspend(PMSG_FREEZE);
device_shutdown();
printk(KERN_EMERG "Restarting system with command '%s'.\n", buffer);
machine_restart(buffer);
break;
#ifdef CONFIG_KEXEC
case LINUX_REBOOT_CMD_KEXEC:
{
struct kimage *image;
image = xchg(&kexec_image, 0);
if (!image) {
unlock_kernel();
return -EINVAL;
}
notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
system_state = SYSTEM_RESTART;
device_shutdown();
printk(KERN_EMERG "Starting new kernel\n");
machine_shutdown();
machine_kexec(image);
break;
}
#endif
#ifdef CONFIG_SOFTWARE_SUSPEND
case LINUX_REBOOT_CMD_SW_SUSPEND:
{
int ret = software_suspend();
unlock_kernel();
return ret;
}
#endif
default:
unlock_kernel();
return -EINVAL;
}
unlock_kernel();
return 0;
}
static void deferred_cad(void *dummy)
{
notifier_call_chain(&reboot_notifier_list, SYS_RESTART, NULL);
machine_restart(NULL);
}
/*
* This function gets called by ctrl-alt-del - ie the keyboard interrupt.
* As it's called within an interrupt, it may NOT sync: the only choice
* is whether to reboot at once, or just ignore the ctrl-alt-del.
*/
void ctrl_alt_del(void)
{
static DECLARE_WORK(cad_work, deferred_cad, NULL);
if (C_A_D)
schedule_work(&cad_work);
else
kill_proc(cad_pid, SIGINT, 1);
}
/*
* Unprivileged users may change the real gid to the effective gid
* or vice versa. (BSD-style)
*
* If you set the real gid at all, or set the effective gid to a value not
* equal to the real gid, then the saved gid is set to the new effective gid.
*
* This makes it possible for a setgid program to completely drop its
* privileges, which is often a useful assertion to make when you are doing
* a security audit over a program.
*
* The general idea is that a program which uses just setregid() will be
* 100% compatible with BSD. A program which uses just setgid() will be
* 100% compatible with POSIX with saved IDs.
*
* SMP: There are not races, the GIDs are checked only by filesystem
* operations (as far as semantic preservation is concerned).
*/
asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
{
int old_rgid = current->gid;
int old_egid = current->egid;
int new_rgid = old_rgid;
int new_egid = old_egid;
int retval;
retval = security_task_setgid(rgid, egid, (gid_t)-1, LSM_SETID_RE);
if (retval)
return retval;
if (rgid != (gid_t) -1) {
if ((old_rgid == rgid) ||
(current->egid==rgid) ||
capable(CAP_SETGID))
new_rgid = rgid;
else
return -EPERM;
}
if (egid != (gid_t) -1) {
if ((old_rgid == egid) ||
(current->egid == egid) ||
(current->sgid == egid) ||
capable(CAP_SETGID))
new_egid = egid;
else {
return -EPERM;
}
}
if (new_egid != old_egid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
if (rgid != (gid_t) -1 ||
(egid != (gid_t) -1 && egid != old_rgid))
current->sgid = new_egid;
current->fsgid = new_egid;
current->egid = new_egid;
current->gid = new_rgid;
key_fsgid_changed(current);
return 0;
}
/*
* setgid() is implemented like SysV w/ SAVED_IDS
*
* SMP: Same implicit races as above.
*/
asmlinkage long sys_setgid(gid_t gid)
{
int old_egid = current->egid;
int retval;
retval = security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_ID);
if (retval)
return retval;
if (capable(CAP_SETGID))
{
if(old_egid != gid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->gid = current->egid = current->sgid = current->fsgid = gid;
}
else if ((gid == current->gid) || (gid == current->sgid))
{
if(old_egid != gid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->egid = current->fsgid = gid;
}
else
return -EPERM;
key_fsgid_changed(current);
return 0;
}
static int set_user(uid_t new_ruid, int dumpclear)
{
struct user_struct *new_user;
new_user = alloc_uid(new_ruid);
if (!new_user)
return -EAGAIN;
if (atomic_read(&new_user->processes) >=
current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
new_user != &root_user) {
free_uid(new_user);
return -EAGAIN;
}
switch_uid(new_user);
if(dumpclear)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->uid = new_ruid;
return 0;
}
/*
* Unprivileged users may change the real uid to the effective uid
* or vice versa. (BSD-style)
*
* If you set the real uid at all, or set the effective uid to a value not
* equal to the real uid, then the saved uid is set to the new effective uid.
*
* This makes it possible for a setuid program to completely drop its
* privileges, which is often a useful assertion to make when you are doing
* a security audit over a program.
*
* The general idea is that a program which uses just setreuid() will be
* 100% compatible with BSD. A program which uses just setuid() will be
* 100% compatible with POSIX with saved IDs.
*/
asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
{
int old_ruid, old_euid, old_suid, new_ruid, new_euid;
int retval;
retval = security_task_setuid(ruid, euid, (uid_t)-1, LSM_SETID_RE);
if (retval)
return retval;
new_ruid = old_ruid = current->uid;
new_euid = old_euid = current->euid;
old_suid = current->suid;
if (ruid != (uid_t) -1) {
new_ruid = ruid;
if ((old_ruid != ruid) &&
(current->euid != ruid) &&
!capable(CAP_SETUID))
return -EPERM;
}
if (euid != (uid_t) -1) {
new_euid = euid;
if ((old_ruid != euid) &&
(current->euid != euid) &&
(current->suid != euid) &&
!capable(CAP_SETUID))
return -EPERM;
}
if (new_ruid != old_ruid && set_user(new_ruid, new_euid != old_euid) < 0)
return -EAGAIN;
if (new_euid != old_euid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->fsuid = current->euid = new_euid;
if (ruid != (uid_t) -1 ||
(euid != (uid_t) -1 && euid != old_ruid))
current->suid = current->euid;
current->fsuid = current->euid;
key_fsuid_changed(current);
return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RE);
}
/*
* setuid() is implemented like SysV with SAVED_IDS
*
* Note that SAVED_ID's is deficient in that a setuid root program
* like sendmail, for example, cannot set its uid to be a normal
* user and then switch back, because if you're root, setuid() sets
* the saved uid too. If you don't like this, blame the bright people
* in the POSIX committee and/or USG. Note that the BSD-style setreuid()
* will allow a root program to temporarily drop privileges and be able to
* regain them by swapping the real and effective uid.
*/
asmlinkage long sys_setuid(uid_t uid)
{
int old_euid = current->euid;
int old_ruid, old_suid, new_ruid, new_suid;
int retval;
retval = security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_ID);
if (retval)
return retval;
old_ruid = new_ruid = current->uid;
old_suid = current->suid;
new_suid = old_suid;
if (capable(CAP_SETUID)) {
if (uid != old_ruid && set_user(uid, old_euid != uid) < 0)
return -EAGAIN;
new_suid = uid;
} else if ((uid != current->uid) && (uid != new_suid))
return -EPERM;
if (old_euid != uid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->fsuid = current->euid = uid;
current->suid = new_suid;
key_fsuid_changed(current);
return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_ID);
}
/*
* This function implements a generic ability to update ruid, euid,
* and suid. This allows you to implement the 4.4 compatible seteuid().
*/
asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
{
int old_ruid = current->uid;
int old_euid = current->euid;
int old_suid = current->suid;
int retval;
retval = security_task_setuid(ruid, euid, suid, LSM_SETID_RES);
if (retval)
return retval;
if (!capable(CAP_SETUID)) {
if ((ruid != (uid_t) -1) && (ruid != current->uid) &&
(ruid != current->euid) && (ruid != current->suid))
return -EPERM;
if ((euid != (uid_t) -1) && (euid != current->uid) &&
(euid != current->euid) && (euid != current->suid))
return -EPERM;
if ((suid != (uid_t) -1) && (suid != current->uid) &&
(suid != current->euid) && (suid != current->suid))
return -EPERM;
}
if (ruid != (uid_t) -1) {
if (ruid != current->uid && set_user(ruid, euid != current->euid) < 0)
return -EAGAIN;
}
if (euid != (uid_t) -1) {
if (euid != current->euid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->euid = euid;
}
current->fsuid = current->euid;
if (suid != (uid_t) -1)
current->suid = suid;
key_fsuid_changed(current);
return security_task_post_setuid(old_ruid, old_euid, old_suid, LSM_SETID_RES);
}
asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
{
int retval;
if (!(retval = put_user(current->uid, ruid)) &&
!(retval = put_user(current->euid, euid)))
retval = put_user(current->suid, suid);
return retval;
}
/*
* Same as above, but for rgid, egid, sgid.
*/
asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
{
int retval;
retval = security_task_setgid(rgid, egid, sgid, LSM_SETID_RES);
if (retval)
return retval;
if (!capable(CAP_SETGID)) {
if ((rgid != (gid_t) -1) && (rgid != current->gid) &&
(rgid != current->egid) && (rgid != current->sgid))
return -EPERM;
if ((egid != (gid_t) -1) && (egid != current->gid) &&
(egid != current->egid) && (egid != current->sgid))
return -EPERM;
if ((sgid != (gid_t) -1) && (sgid != current->gid) &&
(sgid != current->egid) && (sgid != current->sgid))
return -EPERM;
}
if (egid != (gid_t) -1) {
if (egid != current->egid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->egid = egid;
}
current->fsgid = current->egid;
if (rgid != (gid_t) -1)
current->gid = rgid;
if (sgid != (gid_t) -1)
current->sgid = sgid;
key_fsgid_changed(current);
return 0;
}
asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
{
int retval;
if (!(retval = put_user(current->gid, rgid)) &&
!(retval = put_user(current->egid, egid)))
retval = put_user(current->sgid, sgid);
return retval;
}
/*
* "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
* is used for "access()" and for the NFS daemon (letting nfsd stay at
* whatever uid it wants to). It normally shadows "euid", except when
* explicitly set by setfsuid() or for access..
*/
asmlinkage long sys_setfsuid(uid_t uid)
{
int old_fsuid;
old_fsuid = current->fsuid;
if (security_task_setuid(uid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS))
return old_fsuid;
if (uid == current->uid || uid == current->euid ||
uid == current->suid || uid == current->fsuid ||
capable(CAP_SETUID))
{
if (uid != old_fsuid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->fsuid = uid;
}
key_fsuid_changed(current);
security_task_post_setuid(old_fsuid, (uid_t)-1, (uid_t)-1, LSM_SETID_FS);
return old_fsuid;
}
/*
* Samma p<EFBFBD> svenska..
*/
asmlinkage long sys_setfsgid(gid_t gid)
{
int old_fsgid;
old_fsgid = current->fsgid;
if (security_task_setgid(gid, (gid_t)-1, (gid_t)-1, LSM_SETID_FS))
return old_fsgid;
if (gid == current->gid || gid == current->egid ||
gid == current->sgid || gid == current->fsgid ||
capable(CAP_SETGID))
{
if (gid != old_fsgid)
{
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
current->mm->dumpable = suid_dumpable;
smp_wmb();
}
current->fsgid = gid;
key_fsgid_changed(current);
}
return old_fsgid;
}
asmlinkage long sys_times(struct tms __user * tbuf)
{
/*
* In the SMP world we might just be unlucky and have one of
* the times increment as we use it. Since the value is an
* atomically safe type this is just fine. Conceptually its
* as if the syscall took an instant longer to occur.
*/
if (tbuf) {
struct tms tmp;
cputime_t utime, stime, cutime, cstime;
#ifdef CONFIG_SMP
if (thread_group_empty(current)) {
/*
* Single thread case without the use of any locks.
*
* We may race with release_task if two threads are
* executing. However, release task first adds up the
* counters (__exit_signal) before removing the task
* from the process tasklist (__unhash_process).
* __exit_signal also acquires and releases the
* siglock which results in the proper memory ordering
* so that the list modifications are always visible
* after the counters have been updated.
*
* If the counters have been updated by the second thread
* but the thread has not yet been removed from the list
* then the other branch will be executing which will
* block on tasklist_lock until the exit handling of the
* other task is finished.
*
* This also implies that the sighand->siglock cannot
* be held by another processor. So we can also
* skip acquiring that lock.
*/
utime = cputime_add(current->signal->utime, current->utime);
stime = cputime_add(current->signal->utime, current->stime);
cutime = current->signal->cutime;
cstime = current->signal->cstime;
} else
#endif
{
/* Process with multiple threads */
struct task_struct *tsk = current;
struct task_struct *t;
read_lock(&tasklist_lock);
utime = tsk->signal->utime;
stime = tsk->signal->stime;
t = tsk;
do {
utime = cputime_add(utime, t->utime);
stime = cputime_add(stime, t->stime);
t = next_thread(t);
} while (t != tsk);
/*
* While we have tasklist_lock read-locked, no dying thread
* can be updating current->signal->[us]time. Instead,
* we got their counts included in the live thread loop.
* However, another thread can come in right now and
* do a wait call that updates current->signal->c[us]time.
* To make sure we always see that pair updated atomically,
* we take the siglock around fetching them.
*/
spin_lock_irq(&tsk->sighand->siglock);
cutime = tsk->signal->cutime;
cstime = tsk->signal->cstime;
spin_unlock_irq(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
}
tmp.tms_utime = cputime_to_clock_t(utime);
tmp.tms_stime = cputime_to_clock_t(stime);
tmp.tms_cutime = cputime_to_clock_t(cutime);
tmp.tms_cstime = cputime_to_clock_t(cstime);
if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
return -EFAULT;
}
return (long) jiffies_64_to_clock_t(get_jiffies_64());
}
/*
* This needs some heavy checking ...
* I just haven't the stomach for it. I also don't fully
* understand sessions/pgrp etc. Let somebody who does explain it.
*
* OK, I think I have the protection semantics right.... this is really
* only important on a multi-user system anyway, to make sure one user
* can't send a signal to a process owned by another. -TYT, 12/12/91
*
* Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
* LBT 04.03.94
*/
asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
{
struct task_struct *p;
int err = -EINVAL;
if (!pid)
pid = current->pid;
if (!pgid)
pgid = pid;
if (pgid < 0)
return -EINVAL;
/* From this point forward we keep holding onto the tasklist lock
* so that our parent does not change from under us. -DaveM
*/
write_lock_irq(&tasklist_lock);
err = -ESRCH;
p = find_task_by_pid(pid);
if (!p)
goto out;
err = -EINVAL;
if (!thread_group_leader(p))
goto out;
if (p->parent == current || p->real_parent == current) {
err = -EPERM;
if (p->signal->session != current->signal->session)
goto out;
err = -EACCES;
if (p->did_exec)
goto out;
} else {
err = -ESRCH;
if (p != current)
goto out;
}
err = -EPERM;
if (p->signal->leader)
goto out;
if (pgid != pid) {
struct task_struct *p;
do_each_task_pid(pgid, PIDTYPE_PGID, p) {
if (p->signal->session == current->signal->session)
goto ok_pgid;
} while_each_task_pid(pgid, PIDTYPE_PGID, p);
goto out;
}
ok_pgid:
err = security_task_setpgid(p, pgid);
if (err)
goto out;
if (process_group(p) != pgid) {
detach_pid(p, PIDTYPE_PGID);
p->signal->pgrp = pgid;
attach_pid(p, PIDTYPE_PGID, pgid);
}
err = 0;
out:
/* All paths lead to here, thus we are safe. -DaveM */
write_unlock_irq(&tasklist_lock);
return err;
}
asmlinkage long sys_getpgid(pid_t pid)
{
if (!pid) {
return process_group(current);
} else {
int retval;
struct task_struct *p;
read_lock(&tasklist_lock);
p = find_task_by_pid(pid);
retval = -ESRCH;
if (p) {
retval = security_task_getpgid(p);
if (!retval)
retval = process_group(p);
}
read_unlock(&tasklist_lock);
return retval;
}
}
#ifdef __ARCH_WANT_SYS_GETPGRP
asmlinkage long sys_getpgrp(void)
{
/* SMP - assuming writes are word atomic this is fine */
return process_group(current);
}
#endif
asmlinkage long sys_getsid(pid_t pid)
{
if (!pid) {
return current->signal->session;
} else {
int retval;
struct task_struct *p;
read_lock(&tasklist_lock);
p = find_task_by_pid(pid);
retval = -ESRCH;
if(p) {
retval = security_task_getsid(p);
if (!retval)
retval = p->signal->session;
}
read_unlock(&tasklist_lock);
return retval;
}
}
asmlinkage long sys_setsid(void)
{
struct pid *pid;
int err = -EPERM;
if (!thread_group_leader(current))
return -EINVAL;
down(&tty_sem);
write_lock_irq(&tasklist_lock);
pid = find_pid(PIDTYPE_PGID, current->pid);
if (pid)
goto out;
current->signal->leader = 1;
__set_special_pids(current->pid, current->pid);
current->signal->tty = NULL;
current->signal->tty_old_pgrp = 0;
err = process_group(current);
out:
write_unlock_irq(&tasklist_lock);
up(&tty_sem);
return err;
}
/*
* Supplementary group IDs
*/
/* init to 2 - one for init_task, one to ensure it is never freed */
struct group_info init_groups = { .usage = ATOMIC_INIT(2) };
struct group_info *groups_alloc(int gidsetsize)
{
struct group_info *group_info;
int nblocks;
int i;
nblocks = (gidsetsize + NGROUPS_PER_BLOCK - 1) / NGROUPS_PER_BLOCK;
/* Make sure we always allocate at least one indirect block pointer */
nblocks = nblocks ? : 1;
group_info = kmalloc(sizeof(*group_info) + nblocks*sizeof(gid_t *), GFP_USER);
if (!group_info)
return NULL;
group_info->ngroups = gidsetsize;
group_info->nblocks = nblocks;
atomic_set(&group_info->usage, 1);
if (gidsetsize <= NGROUPS_SMALL) {
group_info->blocks[0] = group_info->small_block;
} else {
for (i = 0; i < nblocks; i++) {
gid_t *b;
b = (void *)__get_free_page(GFP_USER);
if (!b)
goto out_undo_partial_alloc;
group_info->blocks[i] = b;
}
}
return group_info;
out_undo_partial_alloc:
while (--i >= 0) {
free_page((unsigned long)group_info->blocks[i]);
}
kfree(group_info);
return NULL;
}
EXPORT_SYMBOL(groups_alloc);
void groups_free(struct group_info *group_info)
{
if (group_info->blocks[0] != group_info->small_block) {
int i;
for (i = 0; i < group_info->nblocks; i++)
free_page((unsigned long)group_info->blocks[i]);
}
kfree(group_info);
}
EXPORT_SYMBOL(groups_free);
/* export the group_info to a user-space array */
static int groups_to_user(gid_t __user *grouplist,
struct group_info *group_info)
{
int i;
int count = group_info->ngroups;
for (i = 0; i < group_info->nblocks; i++) {
int cp_count = min(NGROUPS_PER_BLOCK, count);
int off = i * NGROUPS_PER_BLOCK;
int len = cp_count * sizeof(*grouplist);
if (copy_to_user(grouplist+off, group_info->blocks[i], len))
return -EFAULT;
count -= cp_count;
}
return 0;
}
/* fill a group_info from a user-space array - it must be allocated already */
static int groups_from_user(struct group_info *group_info,
gid_t __user *grouplist)
{
int i;
int count = group_info->ngroups;
for (i = 0; i < group_info->nblocks; i++) {
int cp_count = min(NGROUPS_PER_BLOCK, count);
int off = i * NGROUPS_PER_BLOCK;
int len = cp_count * sizeof(*grouplist);
if (copy_from_user(group_info->blocks[i], grouplist+off, len))
return -EFAULT;
count -= cp_count;
}
return 0;
}
/* a simple Shell sort */
static void groups_sort(struct group_info *group_info)
{
int base, max, stride;
int gidsetsize = group_info->ngroups;
for (stride = 1; stride < gidsetsize; stride = 3 * stride + 1)
; /* nothing */
stride /= 3;
while (stride) {
max = gidsetsize - stride;
for (base = 0; base < max; base++) {
int left = base;
int right = left + stride;
gid_t tmp = GROUP_AT(group_info, right);
while (left >= 0 && GROUP_AT(group_info, left) > tmp) {
GROUP_AT(group_info, right) =
GROUP_AT(group_info, left);
right = left;
left -= stride;
}
GROUP_AT(group_info, right) = tmp;
}
stride /= 3;
}
}
/* a simple bsearch */
[PATCH] Keys: Make request-key create an authorisation key The attached patch makes the following changes: (1) There's a new special key type called ".request_key_auth". This is an authorisation key for when one process requests a key and another process is started to construct it. This type of key cannot be created by the user; nor can it be requested by kernel services. Authorisation keys hold two references: (a) Each refers to a key being constructed. When the key being constructed is instantiated the authorisation key is revoked, rendering it of no further use. (b) The "authorising process". This is either: (i) the process that called request_key(), or: (ii) if the process that called request_key() itself had an authorisation key in its session keyring, then the authorising process referred to by that authorisation key will also be referred to by the new authorisation key. This means that the process that initiated a chain of key requests will authorise the lot of them, and will, by default, wind up with the keys obtained from them in its keyrings. (2) request_key() creates an authorisation key which is then passed to /sbin/request-key in as part of a new session keyring. (3) When request_key() is searching for a key to hand back to the caller, if it comes across an authorisation key in the session keyring of the calling process, it will also search the keyrings of the process specified therein and it will use the specified process's credentials (fsuid, fsgid, groups) to do that rather than the calling process's credentials. This allows a process started by /sbin/request-key to find keys belonging to the authorising process. (4) A key can be read, even if the process executing KEYCTL_READ doesn't have direct read or search permission if that key is contained within the keyrings of a process specified by an authorisation key found within the calling process's session keyring, and is searchable using the credentials of the authorising process. This allows a process started by /sbin/request-key to read keys belonging to the authorising process. (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or KEYCTL_NEGATE will specify a keyring of the authorising process, rather than the process doing the instantiation. (6) One of the process keyrings can be nominated as the default to which request_key() should attach new keys if not otherwise specified. This is done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_* constants. The current setting can also be read using this call. (7) request_key() is partially interruptible. If it is waiting for another process to finish constructing a key, it can be interrupted. This permits a request-key cycle to be broken without recourse to rebooting. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 07:00:56 +02:00
int groups_search(struct group_info *group_info, gid_t grp)
{
int left, right;
if (!group_info)
return 0;
left = 0;
right = group_info->ngroups;
while (left < right) {
int mid = (left+right)/2;
int cmp = grp - GROUP_AT(group_info, mid);
if (cmp > 0)
left = mid + 1;
else if (cmp < 0)
right = mid;
else
return 1;
}
return 0;
}
/* validate and set current->group_info */
int set_current_groups(struct group_info *group_info)
{
int retval;
struct group_info *old_info;
retval = security_task_setgroups(group_info);
if (retval)
return retval;
groups_sort(group_info);
get_group_info(group_info);
task_lock(current);
old_info = current->group_info;
current->group_info = group_info;
task_unlock(current);
put_group_info(old_info);
return 0;
}
EXPORT_SYMBOL(set_current_groups);
asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
{
int i = 0;
/*
* SMP: Nobody else can change our grouplist. Thus we are
* safe.
*/
if (gidsetsize < 0)
return -EINVAL;
/* no need to grab task_lock here; it cannot change */
get_group_info(current->group_info);
i = current->group_info->ngroups;
if (gidsetsize) {
if (i > gidsetsize) {
i = -EINVAL;
goto out;
}
if (groups_to_user(grouplist, current->group_info)) {
i = -EFAULT;
goto out;
}
}
out:
put_group_info(current->group_info);
return i;
}
/*
* SMP: Our groups are copy-on-write. We can set them safely
* without another task interfering.
*/
asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
{
struct group_info *group_info;
int retval;
if (!capable(CAP_SETGID))
return -EPERM;
if ((unsigned)gidsetsize > NGROUPS_MAX)
return -EINVAL;
group_info = groups_alloc(gidsetsize);
if (!group_info)
return -ENOMEM;
retval = groups_from_user(group_info, grouplist);
if (retval) {
put_group_info(group_info);
return retval;
}
retval = set_current_groups(group_info);
put_group_info(group_info);
return retval;
}
/*
* Check whether we're fsgid/egid or in the supplemental group..
*/
int in_group_p(gid_t grp)
{
int retval = 1;
if (grp != current->fsgid) {
get_group_info(current->group_info);
retval = groups_search(current->group_info, grp);
put_group_info(current->group_info);
}
return retval;
}
EXPORT_SYMBOL(in_group_p);
int in_egroup_p(gid_t grp)
{
int retval = 1;
if (grp != current->egid) {
get_group_info(current->group_info);
retval = groups_search(current->group_info, grp);
put_group_info(current->group_info);
}
return retval;
}
EXPORT_SYMBOL(in_egroup_p);
DECLARE_RWSEM(uts_sem);
EXPORT_SYMBOL(uts_sem);
asmlinkage long sys_newuname(struct new_utsname __user * name)
{
int errno = 0;
down_read(&uts_sem);
if (copy_to_user(name,&system_utsname,sizeof *name))
errno = -EFAULT;
up_read(&uts_sem);
return errno;
}
asmlinkage long sys_sethostname(char __user *name, int len)
{
int errno;
char tmp[__NEW_UTS_LEN];
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (len < 0 || len > __NEW_UTS_LEN)
return -EINVAL;
down_write(&uts_sem);
errno = -EFAULT;
if (!copy_from_user(tmp, name, len)) {
memcpy(system_utsname.nodename, tmp, len);
system_utsname.nodename[len] = 0;
errno = 0;
}
up_write(&uts_sem);
return errno;
}
#ifdef __ARCH_WANT_SYS_GETHOSTNAME
asmlinkage long sys_gethostname(char __user *name, int len)
{
int i, errno;
if (len < 0)
return -EINVAL;
down_read(&uts_sem);
i = 1 + strlen(system_utsname.nodename);
if (i > len)
i = len;
errno = 0;
if (copy_to_user(name, system_utsname.nodename, i))
errno = -EFAULT;
up_read(&uts_sem);
return errno;
}
#endif
/*
* Only setdomainname; getdomainname can be implemented by calling
* uname()
*/
asmlinkage long sys_setdomainname(char __user *name, int len)
{
int errno;
char tmp[__NEW_UTS_LEN];
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (len < 0 || len > __NEW_UTS_LEN)
return -EINVAL;
down_write(&uts_sem);
errno = -EFAULT;
if (!copy_from_user(tmp, name, len)) {
memcpy(system_utsname.domainname, tmp, len);
system_utsname.domainname[len] = 0;
errno = 0;
}
up_write(&uts_sem);
return errno;
}
asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
{
if (resource >= RLIM_NLIMITS)
return -EINVAL;
else {
struct rlimit value;
task_lock(current->group_leader);
value = current->signal->rlim[resource];
task_unlock(current->group_leader);
return copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
}
}
#ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
/*
* Back compatibility for getrlimit. Needed for some apps.
*/
asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
{
struct rlimit x;
if (resource >= RLIM_NLIMITS)
return -EINVAL;
task_lock(current->group_leader);
x = current->signal->rlim[resource];
task_unlock(current->group_leader);
if(x.rlim_cur > 0x7FFFFFFF)
x.rlim_cur = 0x7FFFFFFF;
if(x.rlim_max > 0x7FFFFFFF)
x.rlim_max = 0x7FFFFFFF;
return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
}
#endif
asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
{
struct rlimit new_rlim, *old_rlim;
int retval;
if (resource >= RLIM_NLIMITS)
return -EINVAL;
if(copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
return -EFAULT;
if (new_rlim.rlim_cur > new_rlim.rlim_max)
return -EINVAL;
old_rlim = current->signal->rlim + resource;
if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
!capable(CAP_SYS_RESOURCE))
return -EPERM;
if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > NR_OPEN)
return -EPERM;
retval = security_task_setrlimit(resource, &new_rlim);
if (retval)
return retval;
task_lock(current->group_leader);
*old_rlim = new_rlim;
task_unlock(current->group_leader);
if (resource == RLIMIT_CPU && new_rlim.rlim_cur != RLIM_INFINITY &&
(cputime_eq(current->signal->it_prof_expires, cputime_zero) ||
new_rlim.rlim_cur <= cputime_to_secs(
current->signal->it_prof_expires))) {
cputime_t cputime = secs_to_cputime(new_rlim.rlim_cur);
read_lock(&tasklist_lock);
spin_lock_irq(&current->sighand->siglock);
set_process_cpu_timer(current, CPUCLOCK_PROF,
&cputime, NULL);
spin_unlock_irq(&current->sighand->siglock);
read_unlock(&tasklist_lock);
}
return 0;
}
/*
* It would make sense to put struct rusage in the task_struct,
* except that would make the task_struct be *really big*. After
* task_struct gets moved into malloc'ed memory, it would
* make sense to do this. It will make moving the rest of the information
* a lot simpler! (Which we're not doing right now because we're not
* measuring them yet).
*
* This expects to be called with tasklist_lock read-locked or better,
* and the siglock not locked. It may momentarily take the siglock.
*
* When sampling multiple threads for RUSAGE_SELF, under SMP we might have
* races with threads incrementing their own counters. But since word
* reads are atomic, we either get new values or old values and we don't
* care which for the sums. We always take the siglock to protect reading
* the c* fields from p->signal from races with exit.c updating those
* fields when reaping, so a sample either gets all the additions of a
* given child after it's reaped, or none so this sample is before reaping.
*/
static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
{
struct task_struct *t;
unsigned long flags;
cputime_t utime, stime;
memset((char *) r, 0, sizeof *r);
if (unlikely(!p->signal))
return;
switch (who) {
case RUSAGE_CHILDREN:
spin_lock_irqsave(&p->sighand->siglock, flags);
utime = p->signal->cutime;
stime = p->signal->cstime;
r->ru_nvcsw = p->signal->cnvcsw;
r->ru_nivcsw = p->signal->cnivcsw;
r->ru_minflt = p->signal->cmin_flt;
r->ru_majflt = p->signal->cmaj_flt;
spin_unlock_irqrestore(&p->sighand->siglock, flags);
cputime_to_timeval(utime, &r->ru_utime);
cputime_to_timeval(stime, &r->ru_stime);
break;
case RUSAGE_SELF:
spin_lock_irqsave(&p->sighand->siglock, flags);
utime = stime = cputime_zero;
goto sum_group;
case RUSAGE_BOTH:
spin_lock_irqsave(&p->sighand->siglock, flags);
utime = p->signal->cutime;
stime = p->signal->cstime;
r->ru_nvcsw = p->signal->cnvcsw;
r->ru_nivcsw = p->signal->cnivcsw;
r->ru_minflt = p->signal->cmin_flt;
r->ru_majflt = p->signal->cmaj_flt;
sum_group:
utime = cputime_add(utime, p->signal->utime);
stime = cputime_add(stime, p->signal->stime);
r->ru_nvcsw += p->signal->nvcsw;
r->ru_nivcsw += p->signal->nivcsw;
r->ru_minflt += p->signal->min_flt;
r->ru_majflt += p->signal->maj_flt;
t = p;
do {
utime = cputime_add(utime, t->utime);
stime = cputime_add(stime, t->stime);
r->ru_nvcsw += t->nvcsw;
r->ru_nivcsw += t->nivcsw;
r->ru_minflt += t->min_flt;
r->ru_majflt += t->maj_flt;
t = next_thread(t);
} while (t != p);
spin_unlock_irqrestore(&p->sighand->siglock, flags);
cputime_to_timeval(utime, &r->ru_utime);
cputime_to_timeval(stime, &r->ru_stime);
break;
default:
BUG();
}
}
int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
{
struct rusage r;
read_lock(&tasklist_lock);
k_getrusage(p, who, &r);
read_unlock(&tasklist_lock);
return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
}
asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
{
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
return -EINVAL;
return getrusage(current, who, ru);
}
asmlinkage long sys_umask(int mask)
{
mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
return mask;
}
asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5)
{
long error;
int sig;
error = security_task_prctl(option, arg2, arg3, arg4, arg5);
if (error)
return error;
switch (option) {
case PR_SET_PDEATHSIG:
sig = arg2;
if (!valid_signal(sig)) {
error = -EINVAL;
break;
}
current->pdeath_signal = sig;
break;
case PR_GET_PDEATHSIG:
error = put_user(current->pdeath_signal, (int __user *)arg2);
break;
case PR_GET_DUMPABLE:
if (current->mm->dumpable)
error = 1;
break;
case PR_SET_DUMPABLE:
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:09:43 +02:00
if (arg2 < 0 || arg2 > 2) {
error = -EINVAL;
break;
}
current->mm->dumpable = arg2;
break;
case PR_SET_UNALIGN:
error = SET_UNALIGN_CTL(current, arg2);
break;
case PR_GET_UNALIGN:
error = GET_UNALIGN_CTL(current, arg2);
break;
case PR_SET_FPEMU:
error = SET_FPEMU_CTL(current, arg2);
break;
case PR_GET_FPEMU:
error = GET_FPEMU_CTL(current, arg2);
break;
case PR_SET_FPEXC:
error = SET_FPEXC_CTL(current, arg2);
break;
case PR_GET_FPEXC:
error = GET_FPEXC_CTL(current, arg2);
break;
case PR_GET_TIMING:
error = PR_TIMING_STATISTICAL;
break;
case PR_SET_TIMING:
if (arg2 == PR_TIMING_STATISTICAL)
error = 0;
else
error = -EINVAL;
break;
case PR_GET_KEEPCAPS:
if (current->keep_capabilities)
error = 1;
break;
case PR_SET_KEEPCAPS:
if (arg2 != 0 && arg2 != 1) {
error = -EINVAL;
break;
}
current->keep_capabilities = arg2;
break;
case PR_SET_NAME: {
struct task_struct *me = current;
unsigned char ncomm[sizeof(me->comm)];
ncomm[sizeof(me->comm)-1] = 0;
if (strncpy_from_user(ncomm, (char __user *)arg2,
sizeof(me->comm)-1) < 0)
return -EFAULT;
set_task_comm(me, ncomm);
return 0;
}
case PR_GET_NAME: {
struct task_struct *me = current;
unsigned char tcomm[sizeof(me->comm)];
get_task_comm(tcomm, me);
if (copy_to_user((char __user *)arg2, tcomm, sizeof(tcomm)))
return -EFAULT;
return 0;
}
default:
error = -EINVAL;
break;
}
return error;
}