3539 lines
87 KiB
C
3539 lines
87 KiB
C
|
/* -*- linux-c -*-
|
|||
|
|
*
|
|||
|
|
* sound/wavfront.c
|
|||
|
|
*
|
|||
|
|
* A Linux driver for Turtle Beach WaveFront Series (Maui, Tropez, Tropez Plus)
|
|||
|
|
*
|
|||
|
|
* This driver supports the onboard wavetable synthesizer (an ICS2115),
|
|||
|
|
* including patch, sample and program loading and unloading, conversion
|
|||
|
|
* of GUS patches during loading, and full user-level access to all
|
|||
|
|
* WaveFront commands. It tries to provide semi-intelligent patch and
|
|||
|
|
* sample management as well.
|
|||
|
|
*
|
|||
|
|
* It also provides support for the ICS emulation of an MPU-401. Full
|
|||
|
|
* support for the ICS emulation's "virtual MIDI mode" is provided in
|
|||
|
|
* wf_midi.c.
|
|||
|
|
*
|
|||
|
|
* Support is also provided for the Tropez Plus' onboard FX processor,
|
|||
|
|
* a Yamaha YSS225. Currently, code exists to configure the YSS225,
|
|||
|
|
* and there is an interface allowing tweaking of any of its memory
|
|||
|
|
* addresses. However, I have been unable to decipher the logical
|
|||
|
|
* positioning of the configuration info for various effects, so for
|
|||
|
|
* now, you just get the YSS225 in the same state as Turtle Beach's
|
|||
|
|
* "SETUPSND.EXE" utility leaves it.
|
|||
|
|
*
|
|||
|
|
* The boards' DAC/ADC (a Crystal CS4232) is supported by cs4232.[co],
|
|||
|
|
* This chip also controls the configuration of the card: the wavefront
|
|||
|
|
* synth is logical unit 4.
|
|||
|
|
*
|
|||
|
|
*
|
|||
|
|
* Supported devices:
|
|||
|
|
*
|
|||
|
|
* /dev/dsp - using cs4232+ad1848 modules, OSS compatible
|
|||
|
|
* /dev/midiNN and /dev/midiNN+1 - using wf_midi code, OSS compatible
|
|||
|
|
* /dev/synth00 - raw synth interface
|
|||
|
|
*
|
|||
|
|
**********************************************************************
|
|||
|
|
*
|
|||
|
|
* Copyright (C) by Paul Barton-Davis 1998
|
|||
|
|
*
|
|||
|
|
* Some portions of this file are taken from work that is
|
|||
|
|
* copyright (C) by Hannu Savolainen 1993-1996
|
|||
|
|
*
|
|||
|
|
* Although the relevant code here is all new, the handling of
|
|||
|
|
* sample/alias/multi- samples is entirely based on a driver by Matt
|
|||
|
|
* Martin and Rutger Nijlunsing which demonstrated how to get things
|
|||
|
|
* to work correctly. The GUS patch loading code has been almost
|
|||
|
|
* unaltered by me, except to fit formatting and function names in the
|
|||
|
|
* rest of the file. Many thanks to them.
|
|||
|
|
*
|
|||
|
|
* Appreciation and thanks to Hannu Savolainen for his early work on the Maui
|
|||
|
|
* driver, and answering a few questions while this one was developed.
|
|||
|
|
*
|
|||
|
|
* Absolutely NO thanks to Turtle Beach/Voyetra and Yamaha for their
|
|||
|
|
* complete lack of help in developing this driver, and in particular
|
|||
|
|
* for their utter silence in response to questions about undocumented
|
|||
|
|
* aspects of configuring a WaveFront soundcard, particularly the
|
|||
|
|
* effects processor.
|
|||
|
|
*
|
|||
|
|
* $Id: wavfront.c,v 0.7 1998/09/09 15:47:36 pbd Exp $
|
|||
|
|
*
|
|||
|
|
* This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
|
|||
|
|
* Version 2 (June 1991). See the "COPYING" file distributed with this software
|
|||
|
|
* for more info.
|
|||
|
|
*
|
|||
|
|
* Changes:
|
|||
|
|
* 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
|
|||
|
|
* Added some __init and __initdata to entries in yss225.c
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#include <linux/module.h>
|
|||
|
|
|
|||
|
|
#include <linux/kernel.h>
|
|||
|
|
#include <linux/init.h>
|
|||
|
|
#include <linux/sched.h>
|
|||
|
|
#include <linux/smp_lock.h>
|
|||
|
|
#include <linux/ptrace.h>
|
|||
|
|
#include <linux/fcntl.h>
|
|||
|
|
#include <linux/syscalls.h>
|
|||
|
|
#include <linux/ioport.h>
|
|||
|
|
#include <linux/spinlock.h>
|
|||
|
|
#include <linux/interrupt.h>
|
|||
|
|
#include <linux/config.h>
|
|||
|
|
|
|||
|
|
#include <linux/delay.h>
|
|||
|
|
|
|||
|
|
#include "sound_config.h"
|
|||
|
|
|
|||
|
|
#include <linux/wavefront.h>
|
|||
|
|
|
|||
|
|
#define _MIDI_SYNTH_C_
|
|||
|
|
#define MIDI_SYNTH_NAME "WaveFront MIDI"
|
|||
|
|
#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
|
|||
|
|
#include "midi_synth.h"
|
|||
|
|
|
|||
|
|
/* Compile-time control of the extent to which OSS is supported.
|
|||
|
|
|
|||
|
|
I consider /dev/sequencer to be an anachronism, but given its
|
|||
|
|
widespread usage by various Linux MIDI software, it seems worth
|
|||
|
|
offering support to it if it's not too painful. Instead of using
|
|||
|
|
/dev/sequencer, I recommend:
|
|||
|
|
|
|||
|
|
for synth programming and patch loading: /dev/synthNN
|
|||
|
|
for kernel-synchronized MIDI sequencing: the ALSA sequencer
|
|||
|
|
for direct MIDI control: /dev/midiNN
|
|||
|
|
|
|||
|
|
I have never tried static compilation into the kernel. The #if's
|
|||
|
|
for this are really just notes to myself about what the code is
|
|||
|
|
for.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#define OSS_SUPPORT_SEQ 0x1 /* use of /dev/sequencer */
|
|||
|
|
#define OSS_SUPPORT_STATIC_INSTALL 0x2 /* static compilation into kernel */
|
|||
|
|
|
|||
|
|
#define OSS_SUPPORT_LEVEL 0x1 /* just /dev/sequencer for now */
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
static int (*midi_load_patch) (int devno, int format, const char __user *addr,
|
|||
|
|
int offs, int count, int pmgr_flag) = NULL;
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
|
|||
|
|
/* if WF_DEBUG not defined, no run-time debugging messages will
|
|||
|
|
be available via the debug flag setting. Given the current
|
|||
|
|
beta state of the driver, this will remain set until a future
|
|||
|
|
version.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#define WF_DEBUG 1
|
|||
|
|
|
|||
|
|
#ifdef WF_DEBUG
|
|||
|
|
|
|||
|
|
/* Thank goodness for gcc's preprocessor ... */
|
|||
|
|
|
|||
|
|
#define DPRINT(cond, format, args...) \
|
|||
|
|
if ((dev.debug & (cond)) == (cond)) { \
|
|||
|
|
printk (KERN_DEBUG LOGNAME format, ## args); \
|
|||
|
|
}
|
|||
|
|
#else
|
|||
|
|
#define DPRINT(cond, format, args...)
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
#define LOGNAME "WaveFront: "
|
|||
|
|
|
|||
|
|
/* bitmasks for WaveFront status port value */
|
|||
|
|
|
|||
|
|
#define STAT_RINTR_ENABLED 0x01
|
|||
|
|
#define STAT_CAN_READ 0x02
|
|||
|
|
#define STAT_INTR_READ 0x04
|
|||
|
|
#define STAT_WINTR_ENABLED 0x10
|
|||
|
|
#define STAT_CAN_WRITE 0x20
|
|||
|
|
#define STAT_INTR_WRITE 0x40
|
|||
|
|
|
|||
|
|
/*** Module-accessible parameters ***************************************/
|
|||
|
|
|
|||
|
|
int wf_raw; /* we normally check for "raw state" to firmware
|
|||
|
|
loading. if set, then during driver loading, the
|
|||
|
|
state of the board is ignored, and we reset the
|
|||
|
|
board and load the firmware anyway.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int fx_raw = 1; /* if this is zero, we'll leave the FX processor in
|
|||
|
|
whatever state it is when the driver is loaded.
|
|||
|
|
The default is to download the microprogram and
|
|||
|
|
associated coefficients to set it up for "default"
|
|||
|
|
operation, whatever that means.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int debug_default; /* you can set this to control debugging
|
|||
|
|
during driver loading. it takes any combination
|
|||
|
|
of the WF_DEBUG_* flags defined in
|
|||
|
|
wavefront.h
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
/* XXX this needs to be made firmware and hardware version dependent */
|
|||
|
|
|
|||
|
|
static char *ospath = "/etc/sound/wavefront.os"; /* where to find a processed
|
|||
|
|
version of the WaveFront OS
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int wait_polls = 2000; /* This is a number of tries we poll the
|
|||
|
|
status register before resorting to sleeping.
|
|||
|
|
WaveFront being an ISA card each poll takes
|
|||
|
|
about 1.2us. So before going to
|
|||
|
|
sleep we wait up to 2.4ms in a loop.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int sleep_length = HZ/100; /* This says how long we're going to
|
|||
|
|
sleep between polls.
|
|||
|
|
10ms sounds reasonable for fast response.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int sleep_tries = 50; /* Wait for status 0.5 seconds total. */
|
|||
|
|
|
|||
|
|
static int reset_time = 2; /* hundreths of a second we wait after a HW reset for
|
|||
|
|
the expected interrupt.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int ramcheck_time = 20; /* time in seconds to wait while ROM code
|
|||
|
|
checks on-board RAM.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int osrun_time = 10; /* time in seconds we wait for the OS to
|
|||
|
|
start running.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
module_param(wf_raw, int, 0);
|
|||
|
|
module_param(fx_raw, int, 0);
|
|||
|
|
module_param(debug_default, int, 0);
|
|||
|
|
module_param(wait_polls, int, 0);
|
|||
|
|
module_param(sleep_length, int, 0);
|
|||
|
|
module_param(sleep_tries, int, 0);
|
|||
|
|
module_param(ospath, charp, 0);
|
|||
|
|
module_param(reset_time, int, 0);
|
|||
|
|
module_param(ramcheck_time, int, 0);
|
|||
|
|
module_param(osrun_time, int, 0);
|
|||
|
|
|
|||
|
|
/***************************************************************************/
|
|||
|
|
|
|||
|
|
/* Note: because this module doesn't export any symbols, this really isn't
|
|||
|
|
a global variable, even if it looks like one. I was quite confused by
|
|||
|
|
this when I started writing this as a (newer) module -- pbd.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
struct wf_config {
|
|||
|
|
int devno; /* device number from kernel */
|
|||
|
|
int irq; /* "you were one, one of the few ..." */
|
|||
|
|
int base; /* low i/o port address */
|
|||
|
|
|
|||
|
|
#define mpu_data_port base
|
|||
|
|
#define mpu_command_port base + 1 /* write semantics */
|
|||
|
|
#define mpu_status_port base + 1 /* read semantics */
|
|||
|
|
#define data_port base + 2
|
|||
|
|
#define status_port base + 3 /* read semantics */
|
|||
|
|
#define control_port base + 3 /* write semantics */
|
|||
|
|
#define block_port base + 4 /* 16 bit, writeonly */
|
|||
|
|
#define last_block_port base + 6 /* 16 bit, writeonly */
|
|||
|
|
|
|||
|
|
/* FX ports. These are mapped through the ICS2115 to the YS225.
|
|||
|
|
The ICS2115 takes care of flipping the relevant pins on the
|
|||
|
|
YS225 so that access to each of these ports does the right
|
|||
|
|
thing. Note: these are NOT documented by Turtle Beach.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#define fx_status base + 8
|
|||
|
|
#define fx_op base + 8
|
|||
|
|
#define fx_lcr base + 9
|
|||
|
|
#define fx_dsp_addr base + 0xa
|
|||
|
|
#define fx_dsp_page base + 0xb
|
|||
|
|
#define fx_dsp_lsb base + 0xc
|
|||
|
|
#define fx_dsp_msb base + 0xd
|
|||
|
|
#define fx_mod_addr base + 0xe
|
|||
|
|
#define fx_mod_data base + 0xf
|
|||
|
|
|
|||
|
|
volatile int irq_ok; /* set by interrupt handler */
|
|||
|
|
volatile int irq_cnt; /* ditto */
|
|||
|
|
int opened; /* flag, holds open(2) mode */
|
|||
|
|
char debug; /* debugging flags */
|
|||
|
|
int freemem; /* installed RAM, in bytes */
|
|||
|
|
|
|||
|
|
int synth_dev; /* devno for "raw" synth */
|
|||
|
|
int mididev; /* devno for internal MIDI */
|
|||
|
|
int ext_mididev; /* devno for external MIDI */
|
|||
|
|
int fx_mididev; /* devno for FX MIDI interface */
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
int oss_dev; /* devno for OSS sequencer synth */
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
|
|||
|
|
char fw_version[2]; /* major = [0], minor = [1] */
|
|||
|
|
char hw_version[2]; /* major = [0], minor = [1] */
|
|||
|
|
char israw; /* needs Motorola microcode */
|
|||
|
|
char has_fx; /* has FX processor (Tropez+) */
|
|||
|
|
char prog_status[WF_MAX_PROGRAM]; /* WF_SLOT_* */
|
|||
|
|
char patch_status[WF_MAX_PATCH]; /* WF_SLOT_* */
|
|||
|
|
char sample_status[WF_MAX_SAMPLE]; /* WF_ST_* | WF_SLOT_* */
|
|||
|
|
int samples_used; /* how many */
|
|||
|
|
char interrupts_on; /* h/w MPU interrupts enabled ? */
|
|||
|
|
char rom_samples_rdonly; /* can we write on ROM samples */
|
|||
|
|
wait_queue_head_t interrupt_sleeper;
|
|||
|
|
} dev;
|
|||
|
|
|
|||
|
|
static DEFINE_SPINLOCK(lock);
|
|||
|
|
static int detect_wffx(void);
|
|||
|
|
static int wffx_ioctl (wavefront_fx_info *);
|
|||
|
|
static int wffx_init (void);
|
|||
|
|
|
|||
|
|
static int wavefront_delete_sample (int sampnum);
|
|||
|
|
static int wavefront_find_free_sample (void);
|
|||
|
|
|
|||
|
|
/* From wf_midi.c */
|
|||
|
|
|
|||
|
|
extern int virtual_midi_enable (void);
|
|||
|
|
extern int virtual_midi_disable (void);
|
|||
|
|
extern int detect_wf_mpu (int, int);
|
|||
|
|
extern int install_wf_mpu (void);
|
|||
|
|
extern int uninstall_wf_mpu (void);
|
|||
|
|
|
|||
|
|
typedef struct {
|
|||
|
|
int cmd;
|
|||
|
|
char *action;
|
|||
|
|
unsigned int read_cnt;
|
|||
|
|
unsigned int write_cnt;
|
|||
|
|
int need_ack;
|
|||
|
|
} wavefront_command;
|
|||
|
|
|
|||
|
|
static struct {
|
|||
|
|
int errno;
|
|||
|
|
const char *errstr;
|
|||
|
|
} wavefront_errors[] = {
|
|||
|
|
{ 0x01, "Bad sample number" },
|
|||
|
|
{ 0x02, "Out of sample memory" },
|
|||
|
|
{ 0x03, "Bad patch number" },
|
|||
|
|
{ 0x04, "Error in number of voices" },
|
|||
|
|
{ 0x06, "Sample load already in progress" },
|
|||
|
|
{ 0x0B, "No sample load request pending" },
|
|||
|
|
{ 0x0E, "Bad MIDI channel number" },
|
|||
|
|
{ 0x10, "Download Record Error" },
|
|||
|
|
{ 0x80, "Success" },
|
|||
|
|
{ 0 }
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
#define NEEDS_ACK 1
|
|||
|
|
|
|||
|
|
static wavefront_command wavefront_commands[] = {
|
|||
|
|
{ WFC_SET_SYNTHVOL, "set synthesizer volume", 0, 1, NEEDS_ACK },
|
|||
|
|
{ WFC_GET_SYNTHVOL, "get synthesizer volume", 1, 0, 0},
|
|||
|
|
{ WFC_SET_NVOICES, "set number of voices", 0, 1, NEEDS_ACK },
|
|||
|
|
{ WFC_GET_NVOICES, "get number of voices", 1, 0, 0 },
|
|||
|
|
{ WFC_SET_TUNING, "set synthesizer tuning", 0, 2, NEEDS_ACK },
|
|||
|
|
{ WFC_GET_TUNING, "get synthesizer tuning", 2, 0, 0 },
|
|||
|
|
{ WFC_DISABLE_CHANNEL, "disable synth channel", 0, 1, NEEDS_ACK },
|
|||
|
|
{ WFC_ENABLE_CHANNEL, "enable synth channel", 0, 1, NEEDS_ACK },
|
|||
|
|
{ WFC_GET_CHANNEL_STATUS, "get synth channel status", 3, 0, 0 },
|
|||
|
|
{ WFC_MISYNTH_OFF, "disable midi-in to synth", 0, 0, NEEDS_ACK },
|
|||
|
|
{ WFC_MISYNTH_ON, "enable midi-in to synth", 0, 0, NEEDS_ACK },
|
|||
|
|
{ WFC_VMIDI_ON, "enable virtual midi mode", 0, 0, NEEDS_ACK },
|
|||
|
|
{ WFC_VMIDI_OFF, "disable virtual midi mode", 0, 0, NEEDS_ACK },
|
|||
|
|
{ WFC_MIDI_STATUS, "report midi status", 1, 0, 0 },
|
|||
|
|
{ WFC_FIRMWARE_VERSION, "report firmware version", 2, 0, 0 },
|
|||
|
|
{ WFC_HARDWARE_VERSION, "report hardware version", 2, 0, 0 },
|
|||
|
|
{ WFC_GET_NSAMPLES, "report number of samples", 2, 0, 0 },
|
|||
|
|
{ WFC_INSTOUT_LEVELS, "report instantaneous output levels", 7, 0, 0 },
|
|||
|
|
{ WFC_PEAKOUT_LEVELS, "report peak output levels", 7, 0, 0 },
|
|||
|
|
{ WFC_DOWNLOAD_SAMPLE, "download sample",
|
|||
|
|
0, WF_SAMPLE_BYTES, NEEDS_ACK },
|
|||
|
|
{ WFC_DOWNLOAD_BLOCK, "download block", 0, 0, NEEDS_ACK},
|
|||
|
|
{ WFC_DOWNLOAD_SAMPLE_HEADER, "download sample header",
|
|||
|
|
0, WF_SAMPLE_HDR_BYTES, NEEDS_ACK },
|
|||
|
|
{ WFC_UPLOAD_SAMPLE_HEADER, "upload sample header", 13, 2, 0 },
|
|||
|
|
|
|||
|
|
/* This command requires a variable number of bytes to be written.
|
|||
|
|
There is a hack in wavefront_cmd() to support this. The actual
|
|||
|
|
count is passed in as the read buffer ptr, cast appropriately.
|
|||
|
|
Ugh.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
{ WFC_DOWNLOAD_MULTISAMPLE, "download multisample", 0, 0, NEEDS_ACK },
|
|||
|
|
|
|||
|
|
/* This one is a hack as well. We just read the first byte of the
|
|||
|
|
response, don't fetch an ACK, and leave the rest to the
|
|||
|
|
calling function. Ugly, ugly, ugly.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
{ WFC_UPLOAD_MULTISAMPLE, "upload multisample", 2, 1, 0 },
|
|||
|
|
{ WFC_DOWNLOAD_SAMPLE_ALIAS, "download sample alias",
|
|||
|
|
0, WF_ALIAS_BYTES, NEEDS_ACK },
|
|||
|
|
{ WFC_UPLOAD_SAMPLE_ALIAS, "upload sample alias", WF_ALIAS_BYTES, 2, 0},
|
|||
|
|
{ WFC_DELETE_SAMPLE, "delete sample", 0, 2, NEEDS_ACK },
|
|||
|
|
{ WFC_IDENTIFY_SAMPLE_TYPE, "identify sample type", 5, 2, 0 },
|
|||
|
|
{ WFC_UPLOAD_SAMPLE_PARAMS, "upload sample parameters" },
|
|||
|
|
{ WFC_REPORT_FREE_MEMORY, "report free memory", 4, 0, 0 },
|
|||
|
|
{ WFC_DOWNLOAD_PATCH, "download patch", 0, 134, NEEDS_ACK },
|
|||
|
|
{ WFC_UPLOAD_PATCH, "upload patch", 132, 2, 0 },
|
|||
|
|
{ WFC_DOWNLOAD_PROGRAM, "download program", 0, 33, NEEDS_ACK },
|
|||
|
|
{ WFC_UPLOAD_PROGRAM, "upload program", 32, 1, 0 },
|
|||
|
|
{ WFC_DOWNLOAD_EDRUM_PROGRAM, "download enhanced drum program", 0, 9,
|
|||
|
|
NEEDS_ACK},
|
|||
|
|
{ WFC_UPLOAD_EDRUM_PROGRAM, "upload enhanced drum program", 8, 1, 0},
|
|||
|
|
{ WFC_SET_EDRUM_CHANNEL, "set enhanced drum program channel",
|
|||
|
|
0, 1, NEEDS_ACK },
|
|||
|
|
{ WFC_DISABLE_DRUM_PROGRAM, "disable drum program", 0, 1, NEEDS_ACK },
|
|||
|
|
{ WFC_REPORT_CHANNEL_PROGRAMS, "report channel program numbers",
|
|||
|
|
32, 0, 0 },
|
|||
|
|
{ WFC_NOOP, "the no-op command", 0, 0, NEEDS_ACK },
|
|||
|
|
{ 0x00 }
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
static const char *
|
|||
|
|
wavefront_errorstr (int errnum)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
for (i = 0; wavefront_errors[i].errstr; i++) {
|
|||
|
|
if (wavefront_errors[i].errno == errnum) {
|
|||
|
|
return wavefront_errors[i].errstr;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return "Unknown WaveFront error";
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static wavefront_command *
|
|||
|
|
wavefront_get_command (int cmd)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
for (i = 0; wavefront_commands[i].cmd != 0; i++) {
|
|||
|
|
if (cmd == wavefront_commands[i].cmd) {
|
|||
|
|
return &wavefront_commands[i];
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return (wavefront_command *) 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static inline int
|
|||
|
|
wavefront_status (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
return inb (dev.status_port);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_wait (int mask)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
for (i = 0; i < wait_polls; i++)
|
|||
|
|
if (wavefront_status() & mask)
|
|||
|
|
return 1;
|
|||
|
|
|
|||
|
|
for (i = 0; i < sleep_tries; i++) {
|
|||
|
|
|
|||
|
|
if (wavefront_status() & mask) {
|
|||
|
|
set_current_state(TASK_RUNNING);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|||
|
|
schedule_timeout(sleep_length);
|
|||
|
|
if (signal_pending(current))
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
set_current_state(TASK_RUNNING);
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_read (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
if (wavefront_wait (STAT_CAN_READ))
|
|||
|
|
return inb (dev.data_port);
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "read timeout.\n");
|
|||
|
|
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_write (unsigned char data)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
if (wavefront_wait (STAT_CAN_WRITE)) {
|
|||
|
|
outb (data, dev.data_port);
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "write timeout.\n");
|
|||
|
|
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_cmd (int cmd, unsigned char *rbuf, unsigned char *wbuf)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int ack;
|
|||
|
|
int i;
|
|||
|
|
int c;
|
|||
|
|
wavefront_command *wfcmd;
|
|||
|
|
|
|||
|
|
if ((wfcmd = wavefront_get_command (cmd)) == (wavefront_command *) 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "command 0x%x not supported.\n",
|
|||
|
|
cmd);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Hack to handle the one variable-size write command. See
|
|||
|
|
wavefront_send_multisample() for the other half of this
|
|||
|
|
gross and ugly strategy.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (cmd == WFC_DOWNLOAD_MULTISAMPLE) {
|
|||
|
|
wfcmd->write_cnt = (unsigned int) rbuf;
|
|||
|
|
rbuf = NULL;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_CMD, "0x%x [%s] (%d,%d,%d)\n",
|
|||
|
|
cmd, wfcmd->action, wfcmd->read_cnt,
|
|||
|
|
wfcmd->write_cnt, wfcmd->need_ack);
|
|||
|
|
|
|||
|
|
if (wavefront_write (cmd)) {
|
|||
|
|
DPRINT ((WF_DEBUG_IO|WF_DEBUG_CMD), "cannot request "
|
|||
|
|
"0x%x [%s].\n",
|
|||
|
|
cmd, wfcmd->action);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (wfcmd->write_cnt > 0) {
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "writing %d bytes "
|
|||
|
|
"for 0x%x\n",
|
|||
|
|
wfcmd->write_cnt, cmd);
|
|||
|
|
|
|||
|
|
for (i = 0; i < wfcmd->write_cnt; i++) {
|
|||
|
|
if (wavefront_write (wbuf[i])) {
|
|||
|
|
DPRINT (WF_DEBUG_IO, "bad write for byte "
|
|||
|
|
"%d of 0x%x [%s].\n",
|
|||
|
|
i, cmd, wfcmd->action);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "write[%d] = 0x%x\n",
|
|||
|
|
i, wbuf[i]);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (wfcmd->read_cnt > 0) {
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "reading %d ints "
|
|||
|
|
"for 0x%x\n",
|
|||
|
|
wfcmd->read_cnt, cmd);
|
|||
|
|
|
|||
|
|
for (i = 0; i < wfcmd->read_cnt; i++) {
|
|||
|
|
|
|||
|
|
if ((c = wavefront_read()) == -1) {
|
|||
|
|
DPRINT (WF_DEBUG_IO, "bad read for byte "
|
|||
|
|
"%d of 0x%x [%s].\n",
|
|||
|
|
i, cmd, wfcmd->action);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Now handle errors. Lots of special cases here */
|
|||
|
|
|
|||
|
|
if (c == 0xff) {
|
|||
|
|
if ((c = wavefront_read ()) == -1) {
|
|||
|
|
DPRINT (WF_DEBUG_IO, "bad read for "
|
|||
|
|
"error byte at "
|
|||
|
|
"read byte %d "
|
|||
|
|
"of 0x%x [%s].\n",
|
|||
|
|
i, cmd,
|
|||
|
|
wfcmd->action);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Can you believe this madness ? */
|
|||
|
|
|
|||
|
|
if (c == 1 &&
|
|||
|
|
wfcmd->cmd == WFC_IDENTIFY_SAMPLE_TYPE) {
|
|||
|
|
rbuf[0] = WF_ST_EMPTY;
|
|||
|
|
return (0);
|
|||
|
|
|
|||
|
|
} else if (c == 3 &&
|
|||
|
|
wfcmd->cmd == WFC_UPLOAD_PATCH) {
|
|||
|
|
|
|||
|
|
return 3;
|
|||
|
|
|
|||
|
|
} else if (c == 1 &&
|
|||
|
|
wfcmd->cmd == WFC_UPLOAD_PROGRAM) {
|
|||
|
|
|
|||
|
|
return 1;
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_IO, "error %d (%s) "
|
|||
|
|
"during "
|
|||
|
|
"read for byte "
|
|||
|
|
"%d of 0x%x "
|
|||
|
|
"[%s].\n",
|
|||
|
|
c,
|
|||
|
|
wavefront_errorstr (c),
|
|||
|
|
i, cmd,
|
|||
|
|
wfcmd->action);
|
|||
|
|
return 1;
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
rbuf[i] = c;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "read[%d] = 0x%x\n",i, rbuf[i]);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if ((wfcmd->read_cnt == 0 && wfcmd->write_cnt == 0) || wfcmd->need_ack) {
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_CMD, "reading ACK for 0x%x\n", cmd);
|
|||
|
|
|
|||
|
|
/* Some commands need an ACK, but return zero instead
|
|||
|
|
of the standard value.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if ((ack = wavefront_read()) == 0) {
|
|||
|
|
ack = WF_ACK;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (ack != WF_ACK) {
|
|||
|
|
if (ack == -1) {
|
|||
|
|
DPRINT (WF_DEBUG_IO, "cannot read ack for "
|
|||
|
|
"0x%x [%s].\n",
|
|||
|
|
cmd, wfcmd->action);
|
|||
|
|
return 1;
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
int err = -1; /* something unknown */
|
|||
|
|
|
|||
|
|
if (ack == 0xff) { /* explicit error */
|
|||
|
|
|
|||
|
|
if ((err = wavefront_read ()) == -1) {
|
|||
|
|
DPRINT (WF_DEBUG_DATA,
|
|||
|
|
"cannot read err "
|
|||
|
|
"for 0x%x [%s].\n",
|
|||
|
|
cmd, wfcmd->action);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_IO, "0x%x [%s] "
|
|||
|
|
"failed (0x%x, 0x%x, %s)\n",
|
|||
|
|
cmd, wfcmd->action, ack, err,
|
|||
|
|
wavefront_errorstr (err));
|
|||
|
|
|
|||
|
|
return -err;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "ack received "
|
|||
|
|
"for 0x%x [%s]\n",
|
|||
|
|
cmd, wfcmd->action);
|
|||
|
|
} else {
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_CMD, "0x%x [%s] does not need "
|
|||
|
|
"ACK (%d,%d,%d)\n",
|
|||
|
|
cmd, wfcmd->action, wfcmd->read_cnt,
|
|||
|
|
wfcmd->write_cnt, wfcmd->need_ack);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/***********************************************************************
|
|||
|
|
WaveFront: data munging
|
|||
|
|
|
|||
|
|
Things here are weird. All data written to the board cannot
|
|||
|
|
have its most significant bit set. Any data item with values
|
|||
|
|
potentially > 0x7F (127) must be split across multiple bytes.
|
|||
|
|
|
|||
|
|
Sometimes, we need to munge numeric values that are represented on
|
|||
|
|
the x86 side as 8-32 bit values. Sometimes, we need to munge data
|
|||
|
|
that is represented on the x86 side as an array of bytes. The most
|
|||
|
|
efficient approach to handling both cases seems to be to use 2
|
|||
|
|
different functions for munging and 2 for de-munging. This avoids
|
|||
|
|
weird casting and worrying about bit-level offsets.
|
|||
|
|
|
|||
|
|
**********************************************************************/
|
|||
|
|
|
|||
|
|
static
|
|||
|
|
unsigned char *
|
|||
|
|
munge_int32 (unsigned int src,
|
|||
|
|
unsigned char *dst,
|
|||
|
|
unsigned int dst_size)
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
for (i = 0;i < dst_size; i++) {
|
|||
|
|
*dst = src & 0x7F; /* Mask high bit of LSB */
|
|||
|
|
src = src >> 7; /* Rotate Right 7 bits */
|
|||
|
|
/* Note: we leave the upper bits in place */
|
|||
|
|
|
|||
|
|
dst++;
|
|||
|
|
};
|
|||
|
|
return dst;
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
demunge_int32 (unsigned char* src, int src_size)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
int outval = 0;
|
|||
|
|
|
|||
|
|
for (i = src_size - 1; i >= 0; i--) {
|
|||
|
|
outval=(outval<<7)+src[i];
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return outval;
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
static
|
|||
|
|
unsigned char *
|
|||
|
|
munge_buf (unsigned char *src, unsigned char *dst, unsigned int dst_size)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
unsigned int last = dst_size / 2;
|
|||
|
|
|
|||
|
|
for (i = 0; i < last; i++) {
|
|||
|
|
*dst++ = src[i] & 0x7f;
|
|||
|
|
*dst++ = src[i] >> 7;
|
|||
|
|
}
|
|||
|
|
return dst;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static
|
|||
|
|
unsigned char *
|
|||
|
|
demunge_buf (unsigned char *src, unsigned char *dst, unsigned int src_bytes)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
unsigned char *end = src + src_bytes;
|
|||
|
|
|
|||
|
|
end = src + src_bytes;
|
|||
|
|
|
|||
|
|
/* NOTE: src and dst *CAN* point to the same address */
|
|||
|
|
|
|||
|
|
for (i = 0; src != end; i++) {
|
|||
|
|
dst[i] = *src++;
|
|||
|
|
dst[i] |= (*src++)<<7;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return dst;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/***********************************************************************
|
|||
|
|
WaveFront: sample, patch and program management.
|
|||
|
|
***********************************************************************/
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_delete_sample (int sample_num)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char wbuf[2];
|
|||
|
|
int x;
|
|||
|
|
|
|||
|
|
wbuf[0] = sample_num & 0x7f;
|
|||
|
|
wbuf[1] = sample_num >> 7;
|
|||
|
|
|
|||
|
|
if ((x = wavefront_cmd (WFC_DELETE_SAMPLE, NULL, wbuf)) == 0) {
|
|||
|
|
dev.sample_status[sample_num] = WF_ST_EMPTY;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return x;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_get_sample_status (int assume_rom)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
unsigned char rbuf[32], wbuf[32];
|
|||
|
|
unsigned int sc_real, sc_alias, sc_multi;
|
|||
|
|
|
|||
|
|
/* check sample status */
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_GET_NSAMPLES, rbuf, wbuf)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "cannot request sample count.\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
sc_real = sc_alias = sc_multi = dev.samples_used = 0;
|
|||
|
|
|
|||
|
|
for (i = 0; i < WF_MAX_SAMPLE; i++) {
|
|||
|
|
|
|||
|
|
wbuf[0] = i & 0x7f;
|
|||
|
|
wbuf[1] = i >> 7;
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_IDENTIFY_SAMPLE_TYPE, rbuf, wbuf)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"cannot identify sample "
|
|||
|
|
"type of slot %d\n", i);
|
|||
|
|
dev.sample_status[i] = WF_ST_EMPTY;
|
|||
|
|
continue;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.sample_status[i] = (WF_SLOT_FILLED|rbuf[0]);
|
|||
|
|
|
|||
|
|
if (assume_rom) {
|
|||
|
|
dev.sample_status[i] |= WF_SLOT_ROM;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
switch (rbuf[0] & WF_ST_MASK) {
|
|||
|
|
case WF_ST_SAMPLE:
|
|||
|
|
sc_real++;
|
|||
|
|
break;
|
|||
|
|
case WF_ST_MULTISAMPLE:
|
|||
|
|
sc_multi++;
|
|||
|
|
break;
|
|||
|
|
case WF_ST_ALIAS:
|
|||
|
|
sc_alias++;
|
|||
|
|
break;
|
|||
|
|
case WF_ST_EMPTY:
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
default:
|
|||
|
|
printk (KERN_WARNING LOGNAME "unknown sample type for "
|
|||
|
|
"slot %d (0x%x)\n",
|
|||
|
|
i, rbuf[0]);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (rbuf[0] != WF_ST_EMPTY) {
|
|||
|
|
dev.samples_used++;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
printk (KERN_INFO LOGNAME
|
|||
|
|
"%d samples used (%d real, %d aliases, %d multi), "
|
|||
|
|
"%d empty\n", dev.samples_used, sc_real, sc_alias, sc_multi,
|
|||
|
|
WF_MAX_SAMPLE - dev.samples_used);
|
|||
|
|
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_get_patch_status (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char patchbuf[WF_PATCH_BYTES];
|
|||
|
|
unsigned char patchnum[2];
|
|||
|
|
wavefront_patch *p;
|
|||
|
|
int i, x, cnt, cnt2;
|
|||
|
|
|
|||
|
|
for (i = 0; i < WF_MAX_PATCH; i++) {
|
|||
|
|
patchnum[0] = i & 0x7f;
|
|||
|
|
patchnum[1] = i >> 7;
|
|||
|
|
|
|||
|
|
if ((x = wavefront_cmd (WFC_UPLOAD_PATCH, patchbuf,
|
|||
|
|
patchnum)) == 0) {
|
|||
|
|
|
|||
|
|
dev.patch_status[i] |= WF_SLOT_FILLED;
|
|||
|
|
p = (wavefront_patch *) patchbuf;
|
|||
|
|
dev.sample_status
|
|||
|
|
[p->sample_number|(p->sample_msb<<7)] |=
|
|||
|
|
WF_SLOT_USED;
|
|||
|
|
|
|||
|
|
} else if (x == 3) { /* Bad patch number */
|
|||
|
|
dev.patch_status[i] = 0;
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload patch "
|
|||
|
|
"error 0x%x\n", x);
|
|||
|
|
dev.patch_status[i] = 0;
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* program status has already filled in slot_used bits */
|
|||
|
|
|
|||
|
|
for (i = 0, cnt = 0, cnt2 = 0; i < WF_MAX_PATCH; i++) {
|
|||
|
|
if (dev.patch_status[i] & WF_SLOT_FILLED) {
|
|||
|
|
cnt++;
|
|||
|
|
}
|
|||
|
|
if (dev.patch_status[i] & WF_SLOT_USED) {
|
|||
|
|
cnt2++;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
printk (KERN_INFO LOGNAME
|
|||
|
|
"%d patch slots filled, %d in use\n", cnt, cnt2);
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_get_program_status (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char progbuf[WF_PROGRAM_BYTES];
|
|||
|
|
wavefront_program prog;
|
|||
|
|
unsigned char prognum;
|
|||
|
|
int i, x, l, cnt;
|
|||
|
|
|
|||
|
|
for (i = 0; i < WF_MAX_PROGRAM; i++) {
|
|||
|
|
prognum = i;
|
|||
|
|
|
|||
|
|
if ((x = wavefront_cmd (WFC_UPLOAD_PROGRAM, progbuf,
|
|||
|
|
&prognum)) == 0) {
|
|||
|
|
|
|||
|
|
dev.prog_status[i] |= WF_SLOT_USED;
|
|||
|
|
|
|||
|
|
demunge_buf (progbuf, (unsigned char *) &prog,
|
|||
|
|
WF_PROGRAM_BYTES);
|
|||
|
|
|
|||
|
|
for (l = 0; l < WF_NUM_LAYERS; l++) {
|
|||
|
|
if (prog.layer[l].mute) {
|
|||
|
|
dev.patch_status
|
|||
|
|
[prog.layer[l].patch_number] |=
|
|||
|
|
WF_SLOT_USED;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
} else if (x == 1) { /* Bad program number */
|
|||
|
|
dev.prog_status[i] = 0;
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload program "
|
|||
|
|
"error 0x%x\n", x);
|
|||
|
|
dev.prog_status[i] = 0;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0, cnt = 0; i < WF_MAX_PROGRAM; i++) {
|
|||
|
|
if (dev.prog_status[i]) {
|
|||
|
|
cnt++;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
printk (KERN_INFO LOGNAME "%d programs slots in use\n", cnt);
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_send_patch (wavefront_patch_info *header)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char buf[WF_PATCH_BYTES+2];
|
|||
|
|
unsigned char *bptr;
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "downloading patch %d\n",
|
|||
|
|
header->number);
|
|||
|
|
|
|||
|
|
dev.patch_status[header->number] |= WF_SLOT_FILLED;
|
|||
|
|
|
|||
|
|
bptr = buf;
|
|||
|
|
bptr = munge_int32 (header->number, buf, 2);
|
|||
|
|
munge_buf ((unsigned char *)&header->hdr.p, bptr, WF_PATCH_BYTES);
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_DOWNLOAD_PATCH, NULL, buf)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "download patch failed\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_send_program (wavefront_patch_info *header)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char buf[WF_PROGRAM_BYTES+1];
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "downloading program %d\n",
|
|||
|
|
header->number);
|
|||
|
|
|
|||
|
|
dev.prog_status[header->number] = WF_SLOT_USED;
|
|||
|
|
|
|||
|
|
/* XXX need to zero existing SLOT_USED bit for program_status[i]
|
|||
|
|
where `i' is the program that's being (potentially) overwritten.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
for (i = 0; i < WF_NUM_LAYERS; i++) {
|
|||
|
|
if (header->hdr.pr.layer[i].mute) {
|
|||
|
|
dev.patch_status[header->hdr.pr.layer[i].patch_number] |=
|
|||
|
|
WF_SLOT_USED;
|
|||
|
|
|
|||
|
|
/* XXX need to mark SLOT_USED for sample used by
|
|||
|
|
patch_number, but this means we have to load it. Ick.
|
|||
|
|
*/
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
buf[0] = header->number;
|
|||
|
|
munge_buf ((unsigned char *)&header->hdr.pr, &buf[1], WF_PROGRAM_BYTES);
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_DOWNLOAD_PROGRAM, NULL, buf)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "download patch failed\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_freemem (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
char rbuf[8];
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_REPORT_FREE_MEMORY, rbuf, NULL)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "can't get memory stats.\n");
|
|||
|
|
return -1;
|
|||
|
|
} else {
|
|||
|
|
return demunge_int32 (rbuf, 4);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_send_sample (wavefront_patch_info *header,
|
|||
|
|
UINT16 __user *dataptr,
|
|||
|
|
int data_is_unsigned)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
/* samples are downloaded via a 16-bit wide i/o port
|
|||
|
|
(you could think of it as 2 adjacent 8-bit wide ports
|
|||
|
|
but its less efficient that way). therefore, all
|
|||
|
|
the blocksizes and so forth listed in the documentation,
|
|||
|
|
and used conventionally to refer to sample sizes,
|
|||
|
|
which are given in 8-bit units (bytes), need to be
|
|||
|
|
divided by 2.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
UINT16 sample_short;
|
|||
|
|
UINT32 length;
|
|||
|
|
UINT16 __user *data_end = NULL;
|
|||
|
|
unsigned int i;
|
|||
|
|
const int max_blksize = 4096/2;
|
|||
|
|
unsigned int written;
|
|||
|
|
unsigned int blocksize;
|
|||
|
|
int dma_ack;
|
|||
|
|
int blocknum;
|
|||
|
|
unsigned char sample_hdr[WF_SAMPLE_HDR_BYTES];
|
|||
|
|
unsigned char *shptr;
|
|||
|
|
int skip = 0;
|
|||
|
|
int initial_skip = 0;
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "sample %sdownload for slot %d, "
|
|||
|
|
"type %d, %d bytes from %p\n",
|
|||
|
|
header->size ? "" : "header ",
|
|||
|
|
header->number, header->subkey,
|
|||
|
|
header->size,
|
|||
|
|
header->dataptr);
|
|||
|
|
|
|||
|
|
if (header->number == WAVEFRONT_FIND_FREE_SAMPLE_SLOT) {
|
|||
|
|
int x;
|
|||
|
|
|
|||
|
|
if ((x = wavefront_find_free_sample ()) < 0) {
|
|||
|
|
return -ENOMEM;
|
|||
|
|
}
|
|||
|
|
printk (KERN_DEBUG LOGNAME "unspecified sample => %d\n", x);
|
|||
|
|
header->number = x;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (header->size) {
|
|||
|
|
|
|||
|
|
/* XXX it's a debatable point whether or not RDONLY semantics
|
|||
|
|
on the ROM samples should cover just the sample data or
|
|||
|
|
the sample header. For now, it only covers the sample data,
|
|||
|
|
so anyone is free at all times to rewrite sample headers.
|
|||
|
|
|
|||
|
|
My reason for this is that we have the sample headers
|
|||
|
|
available in the WFB file for General MIDI, and so these
|
|||
|
|
can always be reset if needed. The sample data, however,
|
|||
|
|
cannot be recovered without a complete reset and firmware
|
|||
|
|
reload of the ICS2115, which is a very expensive operation.
|
|||
|
|
|
|||
|
|
So, doing things this way allows us to honor the notion of
|
|||
|
|
"RESETSAMPLES" reasonably cheaply. Note however, that this
|
|||
|
|
is done purely at user level: there is no WFB parser in
|
|||
|
|
this driver, and so a complete reset (back to General MIDI,
|
|||
|
|
or theoretically some other configuration) is the
|
|||
|
|
responsibility of the user level library.
|
|||
|
|
|
|||
|
|
To try to do this in the kernel would be a little
|
|||
|
|
crazy: we'd need 158K of kernel space just to hold
|
|||
|
|
a copy of the patch/program/sample header data.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (dev.rom_samples_rdonly) {
|
|||
|
|
if (dev.sample_status[header->number] & WF_SLOT_ROM) {
|
|||
|
|
printk (KERN_ERR LOGNAME "sample slot %d "
|
|||
|
|
"write protected\n",
|
|||
|
|
header->number);
|
|||
|
|
return -EACCES;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
wavefront_delete_sample (header->number);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (header->size) {
|
|||
|
|
dev.freemem = wavefront_freemem ();
|
|||
|
|
|
|||
|
|
if (dev.freemem < header->size) {
|
|||
|
|
printk (KERN_ERR LOGNAME
|
|||
|
|
"insufficient memory to "
|
|||
|
|
"load %d byte sample.\n",
|
|||
|
|
header->size);
|
|||
|
|
return -ENOMEM;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
skip = WF_GET_CHANNEL(&header->hdr.s);
|
|||
|
|
|
|||
|
|
if (skip > 0 && header->hdr.s.SampleResolution != LINEAR_16BIT) {
|
|||
|
|
printk (KERN_ERR LOGNAME "channel selection only "
|
|||
|
|
"possible on 16-bit samples");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
switch (skip) {
|
|||
|
|
case 0:
|
|||
|
|
initial_skip = 0;
|
|||
|
|
skip = 1;
|
|||
|
|
break;
|
|||
|
|
case 1:
|
|||
|
|
initial_skip = 0;
|
|||
|
|
skip = 2;
|
|||
|
|
break;
|
|||
|
|
case 2:
|
|||
|
|
initial_skip = 1;
|
|||
|
|
skip = 2;
|
|||
|
|
break;
|
|||
|
|
case 3:
|
|||
|
|
initial_skip = 2;
|
|||
|
|
skip = 3;
|
|||
|
|
break;
|
|||
|
|
case 4:
|
|||
|
|
initial_skip = 3;
|
|||
|
|
skip = 4;
|
|||
|
|
break;
|
|||
|
|
case 5:
|
|||
|
|
initial_skip = 4;
|
|||
|
|
skip = 5;
|
|||
|
|
break;
|
|||
|
|
case 6:
|
|||
|
|
initial_skip = 5;
|
|||
|
|
skip = 6;
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "channel selection: %d => "
|
|||
|
|
"initial skip = %d, skip = %d\n",
|
|||
|
|
WF_GET_CHANNEL (&header->hdr.s),
|
|||
|
|
initial_skip, skip);
|
|||
|
|
|
|||
|
|
/* Be safe, and zero the "Unused" bits ... */
|
|||
|
|
|
|||
|
|
WF_SET_CHANNEL(&header->hdr.s, 0);
|
|||
|
|
|
|||
|
|
/* adjust size for 16 bit samples by dividing by two. We always
|
|||
|
|
send 16 bits per write, even for 8 bit samples, so the length
|
|||
|
|
is always half the size of the sample data in bytes.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
length = header->size / 2;
|
|||
|
|
|
|||
|
|
/* the data we're sent has not been munged, and in fact, the
|
|||
|
|
header we have to send isn't just a munged copy either.
|
|||
|
|
so, build the sample header right here.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
shptr = &sample_hdr[0];
|
|||
|
|
|
|||
|
|
shptr = munge_int32 (header->number, shptr, 2);
|
|||
|
|
|
|||
|
|
if (header->size) {
|
|||
|
|
shptr = munge_int32 (length, shptr, 4);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Yes, a 4 byte result doesn't contain all of the offset bits,
|
|||
|
|
but the offset only uses 24 bits.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
shptr = munge_int32 (*((UINT32 *) &header->hdr.s.sampleStartOffset),
|
|||
|
|
shptr, 4);
|
|||
|
|
shptr = munge_int32 (*((UINT32 *) &header->hdr.s.loopStartOffset),
|
|||
|
|
shptr, 4);
|
|||
|
|
shptr = munge_int32 (*((UINT32 *) &header->hdr.s.loopEndOffset),
|
|||
|
|
shptr, 4);
|
|||
|
|
shptr = munge_int32 (*((UINT32 *) &header->hdr.s.sampleEndOffset),
|
|||
|
|
shptr, 4);
|
|||
|
|
|
|||
|
|
/* This one is truly weird. What kind of weirdo decided that in
|
|||
|
|
a system dominated by 16 and 32 bit integers, they would use
|
|||
|
|
a just 12 bits ?
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
shptr = munge_int32 (header->hdr.s.FrequencyBias, shptr, 3);
|
|||
|
|
|
|||
|
|
/* Why is this nybblified, when the MSB is *always* zero ?
|
|||
|
|
Anyway, we can't take address of bitfield, so make a
|
|||
|
|
good-faith guess at where it starts.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
shptr = munge_int32 (*(&header->hdr.s.FrequencyBias+1),
|
|||
|
|
shptr, 2);
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (header->size ?
|
|||
|
|
WFC_DOWNLOAD_SAMPLE : WFC_DOWNLOAD_SAMPLE_HEADER,
|
|||
|
|
NULL, sample_hdr)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "sample %sdownload refused.\n",
|
|||
|
|
header->size ? "" : "header ");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (header->size == 0) {
|
|||
|
|
goto sent; /* Sorry. Just had to have one somewhere */
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
data_end = dataptr + length;
|
|||
|
|
|
|||
|
|
/* Do any initial skip over an unused channel's data */
|
|||
|
|
|
|||
|
|
dataptr += initial_skip;
|
|||
|
|
|
|||
|
|
for (written = 0, blocknum = 0;
|
|||
|
|
written < length; written += max_blksize, blocknum++) {
|
|||
|
|
|
|||
|
|
if ((length - written) > max_blksize) {
|
|||
|
|
blocksize = max_blksize;
|
|||
|
|
} else {
|
|||
|
|
/* round to nearest 16-byte value */
|
|||
|
|
blocksize = ((length-written+7)&~0x7);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_DOWNLOAD_BLOCK, NULL, NULL)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "download block "
|
|||
|
|
"request refused.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0; i < blocksize; i++) {
|
|||
|
|
|
|||
|
|
if (dataptr < data_end) {
|
|||
|
|
|
|||
|
|
__get_user (sample_short, dataptr);
|
|||
|
|
dataptr += skip;
|
|||
|
|
|
|||
|
|
if (data_is_unsigned) { /* GUS ? */
|
|||
|
|
|
|||
|
|
if (WF_SAMPLE_IS_8BIT(&header->hdr.s)) {
|
|||
|
|
|
|||
|
|
/* 8 bit sample
|
|||
|
|
resolution, sign
|
|||
|
|
extend both bytes.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
((unsigned char*)
|
|||
|
|
&sample_short)[0] += 0x7f;
|
|||
|
|
((unsigned char*)
|
|||
|
|
&sample_short)[1] += 0x7f;
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
|
|||
|
|
/* 16 bit sample
|
|||
|
|
resolution, sign
|
|||
|
|
extend the MSB.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
sample_short += 0x7fff;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
|
|||
|
|
/* In padding section of final block:
|
|||
|
|
|
|||
|
|
Don't fetch unsupplied data from
|
|||
|
|
user space, just continue with
|
|||
|
|
whatever the final value was.
|
|||
|
|
*/
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (i < blocksize - 1) {
|
|||
|
|
outw (sample_short, dev.block_port);
|
|||
|
|
} else {
|
|||
|
|
outw (sample_short, dev.last_block_port);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Get "DMA page acknowledge", even though its really
|
|||
|
|
nothing to do with DMA at all.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if ((dma_ack = wavefront_read ()) != WF_DMA_ACK) {
|
|||
|
|
if (dma_ack == -1) {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload sample "
|
|||
|
|
"DMA ack timeout\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload sample "
|
|||
|
|
"DMA ack error 0x%x\n",
|
|||
|
|
dma_ack);
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.sample_status[header->number] = (WF_SLOT_FILLED|WF_ST_SAMPLE);
|
|||
|
|
|
|||
|
|
/* Note, label is here because sending the sample header shouldn't
|
|||
|
|
alter the sample_status info at all.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
sent:
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_send_alias (wavefront_patch_info *header)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char alias_hdr[WF_ALIAS_BYTES];
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "download alias, %d is "
|
|||
|
|
"alias for %d\n",
|
|||
|
|
header->number,
|
|||
|
|
header->hdr.a.OriginalSample);
|
|||
|
|
|
|||
|
|
munge_int32 (header->number, &alias_hdr[0], 2);
|
|||
|
|
munge_int32 (header->hdr.a.OriginalSample, &alias_hdr[2], 2);
|
|||
|
|
munge_int32 (*((unsigned int *)&header->hdr.a.sampleStartOffset),
|
|||
|
|
&alias_hdr[4], 4);
|
|||
|
|
munge_int32 (*((unsigned int *)&header->hdr.a.loopStartOffset),
|
|||
|
|
&alias_hdr[8], 4);
|
|||
|
|
munge_int32 (*((unsigned int *)&header->hdr.a.loopEndOffset),
|
|||
|
|
&alias_hdr[12], 4);
|
|||
|
|
munge_int32 (*((unsigned int *)&header->hdr.a.sampleEndOffset),
|
|||
|
|
&alias_hdr[16], 4);
|
|||
|
|
munge_int32 (header->hdr.a.FrequencyBias, &alias_hdr[20], 3);
|
|||
|
|
munge_int32 (*(&header->hdr.a.FrequencyBias+1), &alias_hdr[23], 2);
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_DOWNLOAD_SAMPLE_ALIAS, NULL, alias_hdr)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "download alias failed.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.sample_status[header->number] = (WF_SLOT_FILLED|WF_ST_ALIAS);
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_send_multisample (wavefront_patch_info *header)
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
int num_samples;
|
|||
|
|
unsigned char msample_hdr[WF_MSAMPLE_BYTES];
|
|||
|
|
|
|||
|
|
munge_int32 (header->number, &msample_hdr[0], 2);
|
|||
|
|
|
|||
|
|
/* You'll recall at this point that the "number of samples" value
|
|||
|
|
in a wavefront_multisample struct is actually the log2 of the
|
|||
|
|
real number of samples.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
num_samples = (1<<(header->hdr.ms.NumberOfSamples&7));
|
|||
|
|
msample_hdr[2] = (unsigned char) header->hdr.ms.NumberOfSamples;
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "multi %d with %d=%d samples\n",
|
|||
|
|
header->number,
|
|||
|
|
header->hdr.ms.NumberOfSamples,
|
|||
|
|
num_samples);
|
|||
|
|
|
|||
|
|
for (i = 0; i < num_samples; i++) {
|
|||
|
|
DPRINT(WF_DEBUG_LOAD_PATCH|WF_DEBUG_DATA, "sample[%d] = %d\n",
|
|||
|
|
i, header->hdr.ms.SampleNumber[i]);
|
|||
|
|
munge_int32 (header->hdr.ms.SampleNumber[i],
|
|||
|
|
&msample_hdr[3+(i*2)], 2);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Need a hack here to pass in the number of bytes
|
|||
|
|
to be written to the synth. This is ugly, and perhaps
|
|||
|
|
one day, I'll fix it.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_DOWNLOAD_MULTISAMPLE,
|
|||
|
|
(unsigned char *) ((num_samples*2)+3),
|
|||
|
|
msample_hdr)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "download of multisample failed.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.sample_status[header->number] = (WF_SLOT_FILLED|WF_ST_MULTISAMPLE);
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_fetch_multisample (wavefront_patch_info *header)
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
unsigned char log_ns[1];
|
|||
|
|
unsigned char number[2];
|
|||
|
|
int num_samples;
|
|||
|
|
|
|||
|
|
munge_int32 (header->number, number, 2);
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_UPLOAD_MULTISAMPLE, log_ns, number)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload multisample failed.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "msample %d has %d samples\n",
|
|||
|
|
header->number, log_ns[0]);
|
|||
|
|
|
|||
|
|
header->hdr.ms.NumberOfSamples = log_ns[0];
|
|||
|
|
|
|||
|
|
/* get the number of samples ... */
|
|||
|
|
|
|||
|
|
num_samples = (1 << log_ns[0]);
|
|||
|
|
|
|||
|
|
for (i = 0; i < num_samples; i++) {
|
|||
|
|
s8 d[2];
|
|||
|
|
|
|||
|
|
if ((d[0] = wavefront_read ()) == -1) {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload multisample failed "
|
|||
|
|
"during sample loop.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if ((d[1] = wavefront_read ()) == -1) {
|
|||
|
|
printk (KERN_ERR LOGNAME "upload multisample failed "
|
|||
|
|
"during sample loop.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
header->hdr.ms.SampleNumber[i] =
|
|||
|
|
demunge_int32 ((unsigned char *) d, 2);
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_DATA, "msample sample[%d] = %d\n",
|
|||
|
|
i, header->hdr.ms.SampleNumber[i]);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_send_drum (wavefront_patch_info *header)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char drumbuf[WF_DRUM_BYTES];
|
|||
|
|
wavefront_drum *drum = &header->hdr.d;
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "downloading edrum for MIDI "
|
|||
|
|
"note %d, patch = %d\n",
|
|||
|
|
header->number, drum->PatchNumber);
|
|||
|
|
|
|||
|
|
drumbuf[0] = header->number & 0x7f;
|
|||
|
|
|
|||
|
|
for (i = 0; i < 4; i++) {
|
|||
|
|
munge_int32 (((unsigned char *)drum)[i], &drumbuf[1+(i*2)], 2);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_DOWNLOAD_EDRUM_PROGRAM, NULL, drumbuf)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "download drum failed.\n");
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_find_free_sample (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
for (i = 0; i < WF_MAX_SAMPLE; i++) {
|
|||
|
|
if (!(dev.sample_status[i] & WF_SLOT_FILLED)) {
|
|||
|
|
return i;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
printk (KERN_WARNING LOGNAME "no free sample slots!\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_find_free_patch (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
for (i = 0; i < WF_MAX_PATCH; i++) {
|
|||
|
|
if (!(dev.patch_status[i] & WF_SLOT_FILLED)) {
|
|||
|
|
return i;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
printk (KERN_WARNING LOGNAME "no free patch slots!\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
log2_2048(int n)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int tbl[]={0, 0, 2048, 3246, 4096, 4755, 5294, 5749, 6143,
|
|||
|
|
6492, 6803, 7084, 7342, 7578, 7797, 8001, 8192,
|
|||
|
|
8371, 8540, 8699, 8851, 8995, 9132, 9264, 9390,
|
|||
|
|
9510, 9626, 9738, 9845, 9949, 10049, 10146};
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
/* Returns 2048*log2(n) */
|
|||
|
|
|
|||
|
|
/* FIXME: this is like doing integer math
|
|||
|
|
on quantum particles (RuN) */
|
|||
|
|
|
|||
|
|
i=0;
|
|||
|
|
while(n>=32*256) {
|
|||
|
|
n>>=8;
|
|||
|
|
i+=2048*8;
|
|||
|
|
}
|
|||
|
|
while(n>=32) {
|
|||
|
|
n>>=1;
|
|||
|
|
i+=2048;
|
|||
|
|
}
|
|||
|
|
i+=tbl[n];
|
|||
|
|
return(i);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_load_gus_patch (int devno, int format, const char __user *addr,
|
|||
|
|
int offs, int count, int pmgr_flag)
|
|||
|
|
{
|
|||
|
|
struct patch_info guspatch;
|
|||
|
|
wavefront_patch_info *samp, *pat, *prog;
|
|||
|
|
wavefront_patch *patp;
|
|||
|
|
wavefront_sample *sampp;
|
|||
|
|
wavefront_program *progp;
|
|||
|
|
|
|||
|
|
int i,base_note;
|
|||
|
|
long sizeof_patch;
|
|||
|
|
int rc = -ENOMEM;
|
|||
|
|
|
|||
|
|
samp = kmalloc(3 * sizeof(wavefront_patch_info), GFP_KERNEL);
|
|||
|
|
if (!samp)
|
|||
|
|
goto free_fail;
|
|||
|
|
pat = samp + 1;
|
|||
|
|
prog = pat + 1;
|
|||
|
|
|
|||
|
|
/* Copy in the header of the GUS patch */
|
|||
|
|
|
|||
|
|
sizeof_patch = (long) &guspatch.data[0] - (long) &guspatch;
|
|||
|
|
if (copy_from_user(&((char *) &guspatch)[offs],
|
|||
|
|
&(addr)[offs], sizeof_patch - offs)) {
|
|||
|
|
rc = -EFAULT;
|
|||
|
|
goto free_fail;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if ((i = wavefront_find_free_patch ()) == -1) {
|
|||
|
|
rc = -EBUSY;
|
|||
|
|
goto free_fail;
|
|||
|
|
}
|
|||
|
|
pat->number = i;
|
|||
|
|
pat->subkey = WF_ST_PATCH;
|
|||
|
|
patp = &pat->hdr.p;
|
|||
|
|
|
|||
|
|
if ((i = wavefront_find_free_sample ()) == -1) {
|
|||
|
|
rc = -EBUSY;
|
|||
|
|
goto free_fail;
|
|||
|
|
}
|
|||
|
|
samp->number = i;
|
|||
|
|
samp->subkey = WF_ST_SAMPLE;
|
|||
|
|
samp->size = guspatch.len;
|
|||
|
|
sampp = &samp->hdr.s;
|
|||
|
|
|
|||
|
|
prog->number = guspatch.instr_no;
|
|||
|
|
progp = &prog->hdr.pr;
|
|||
|
|
|
|||
|
|
/* Setup the patch structure */
|
|||
|
|
|
|||
|
|
patp->amplitude_bias=guspatch.volume;
|
|||
|
|
patp->portamento=0;
|
|||
|
|
patp->sample_number= samp->number & 0xff;
|
|||
|
|
patp->sample_msb= samp->number >> 8;
|
|||
|
|
patp->pitch_bend= /*12*/ 0;
|
|||
|
|
patp->mono=1;
|
|||
|
|
patp->retrigger=1;
|
|||
|
|
patp->nohold=(guspatch.mode & WAVE_SUSTAIN_ON) ? 0:1;
|
|||
|
|
patp->frequency_bias=0;
|
|||
|
|
patp->restart=0;
|
|||
|
|
patp->reuse=0;
|
|||
|
|
patp->reset_lfo=1;
|
|||
|
|
patp->fm_src2=0;
|
|||
|
|
patp->fm_src1=WF_MOD_MOD_WHEEL;
|
|||
|
|
patp->am_src=WF_MOD_PRESSURE;
|
|||
|
|
patp->am_amount=127;
|
|||
|
|
patp->fc1_mod_amount=0;
|
|||
|
|
patp->fc2_mod_amount=0;
|
|||
|
|
patp->fm_amount1=0;
|
|||
|
|
patp->fm_amount2=0;
|
|||
|
|
patp->envelope1.attack_level=127;
|
|||
|
|
patp->envelope1.decay1_level=127;
|
|||
|
|
patp->envelope1.decay2_level=127;
|
|||
|
|
patp->envelope1.sustain_level=127;
|
|||
|
|
patp->envelope1.release_level=0;
|
|||
|
|
patp->envelope2.attack_velocity=127;
|
|||
|
|
patp->envelope2.attack_level=127;
|
|||
|
|
patp->envelope2.decay1_level=127;
|
|||
|
|
patp->envelope2.decay2_level=127;
|
|||
|
|
patp->envelope2.sustain_level=127;
|
|||
|
|
patp->envelope2.release_level=0;
|
|||
|
|
patp->envelope2.attack_velocity=127;
|
|||
|
|
patp->randomizer=0;
|
|||
|
|
|
|||
|
|
/* Program for this patch */
|
|||
|
|
|
|||
|
|
progp->layer[0].patch_number= pat->number; /* XXX is this right ? */
|
|||
|
|
progp->layer[0].mute=1;
|
|||
|
|
progp->layer[0].pan_or_mod=1;
|
|||
|
|
progp->layer[0].pan=7;
|
|||
|
|
progp->layer[0].mix_level=127 /* guspatch.volume */;
|
|||
|
|
progp->layer[0].split_type=0;
|
|||
|
|
progp->layer[0].split_point=0;
|
|||
|
|
progp->layer[0].play_below=0;
|
|||
|
|
|
|||
|
|
for (i = 1; i < 4; i++) {
|
|||
|
|
progp->layer[i].mute=0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Sample data */
|
|||
|
|
|
|||
|
|
sampp->SampleResolution=((~guspatch.mode & WAVE_16_BITS)<<1);
|
|||
|
|
|
|||
|
|
for (base_note=0;
|
|||
|
|
note_to_freq (base_note) < guspatch.base_note;
|
|||
|
|
base_note++);
|
|||
|
|
|
|||
|
|
if ((guspatch.base_note-note_to_freq(base_note))
|
|||
|
|
>(note_to_freq(base_note)-guspatch.base_note))
|
|||
|
|
base_note++;
|
|||
|
|
|
|||
|
|
printk(KERN_DEBUG "ref freq=%d,base note=%d\n",
|
|||
|
|
guspatch.base_freq,
|
|||
|
|
base_note);
|
|||
|
|
|
|||
|
|
sampp->FrequencyBias = (29550 - log2_2048(guspatch.base_freq)
|
|||
|
|
+ base_note*171);
|
|||
|
|
printk(KERN_DEBUG "Freq Bias is %d\n", sampp->FrequencyBias);
|
|||
|
|
sampp->Loop=(guspatch.mode & WAVE_LOOPING) ? 1:0;
|
|||
|
|
sampp->sampleStartOffset.Fraction=0;
|
|||
|
|
sampp->sampleStartOffset.Integer=0;
|
|||
|
|
sampp->loopStartOffset.Fraction=0;
|
|||
|
|
sampp->loopStartOffset.Integer=guspatch.loop_start
|
|||
|
|
>>((guspatch.mode&WAVE_16_BITS) ? 1:0);
|
|||
|
|
sampp->loopEndOffset.Fraction=0;
|
|||
|
|
sampp->loopEndOffset.Integer=guspatch.loop_end
|
|||
|
|
>>((guspatch.mode&WAVE_16_BITS) ? 1:0);
|
|||
|
|
sampp->sampleEndOffset.Fraction=0;
|
|||
|
|
sampp->sampleEndOffset.Integer=guspatch.len >> (guspatch.mode&1);
|
|||
|
|
sampp->Bidirectional=(guspatch.mode&WAVE_BIDIR_LOOP) ? 1:0;
|
|||
|
|
sampp->Reverse=(guspatch.mode&WAVE_LOOP_BACK) ? 1:0;
|
|||
|
|
|
|||
|
|
/* Now ship it down */
|
|||
|
|
|
|||
|
|
wavefront_send_sample (samp,
|
|||
|
|
(unsigned short __user *) &(addr)[sizeof_patch],
|
|||
|
|
(guspatch.mode & WAVE_UNSIGNED) ? 1:0);
|
|||
|
|
wavefront_send_patch (pat);
|
|||
|
|
wavefront_send_program (prog);
|
|||
|
|
|
|||
|
|
/* Now pan as best we can ... use the slave/internal MIDI device
|
|||
|
|
number if it exists (since it talks to the WaveFront), or the
|
|||
|
|
master otherwise.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (dev.mididev > 0) {
|
|||
|
|
midi_synth_controller (dev.mididev, guspatch.instr_no, 10,
|
|||
|
|
((guspatch.panning << 4) > 127) ?
|
|||
|
|
127 : (guspatch.panning << 4));
|
|||
|
|
}
|
|||
|
|
rc = 0;
|
|||
|
|
|
|||
|
|
free_fail:
|
|||
|
|
kfree(samp);
|
|||
|
|
return rc;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_load_patch (const char __user *addr)
|
|||
|
|
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
wavefront_patch_info header;
|
|||
|
|
|
|||
|
|
if (copy_from_user (&header, addr, sizeof(wavefront_patch_info) -
|
|||
|
|
sizeof(wavefront_any))) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "bad address for load patch.\n");
|
|||
|
|
return -EFAULT;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_LOAD_PATCH, "download "
|
|||
|
|
"Sample type: %d "
|
|||
|
|
"Sample number: %d "
|
|||
|
|
"Sample size: %d\n",
|
|||
|
|
header.subkey,
|
|||
|
|
header.number,
|
|||
|
|
header.size);
|
|||
|
|
|
|||
|
|
switch (header.subkey) {
|
|||
|
|
case WF_ST_SAMPLE: /* sample or sample_header, based on patch->size */
|
|||
|
|
|
|||
|
|
if (copy_from_user((unsigned char *) &header.hdr.s,
|
|||
|
|
(unsigned char __user *) header.hdrptr,
|
|||
|
|
sizeof (wavefront_sample)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
return wavefront_send_sample (&header, header.dataptr, 0);
|
|||
|
|
|
|||
|
|
case WF_ST_MULTISAMPLE:
|
|||
|
|
|
|||
|
|
if (copy_from_user(&header.hdr.s, header.hdrptr,
|
|||
|
|
sizeof(wavefront_multisample)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
return wavefront_send_multisample (&header);
|
|||
|
|
|
|||
|
|
|
|||
|
|
case WF_ST_ALIAS:
|
|||
|
|
|
|||
|
|
if (copy_from_user(&header.hdr.a, header.hdrptr,
|
|||
|
|
sizeof (wavefront_alias)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
return wavefront_send_alias (&header);
|
|||
|
|
|
|||
|
|
case WF_ST_DRUM:
|
|||
|
|
if (copy_from_user(&header.hdr.d, header.hdrptr,
|
|||
|
|
sizeof (wavefront_drum)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
return wavefront_send_drum (&header);
|
|||
|
|
|
|||
|
|
case WF_ST_PATCH:
|
|||
|
|
if (copy_from_user(&header.hdr.p, header.hdrptr,
|
|||
|
|
sizeof (wavefront_patch)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
return wavefront_send_patch (&header);
|
|||
|
|
|
|||
|
|
case WF_ST_PROGRAM:
|
|||
|
|
if (copy_from_user(&header.hdr.pr, header.hdrptr,
|
|||
|
|
sizeof (wavefront_program)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
return wavefront_send_program (&header);
|
|||
|
|
|
|||
|
|
default:
|
|||
|
|
printk (KERN_ERR LOGNAME "unknown patch type %d.\n",
|
|||
|
|
header.subkey);
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/***********************************************************************
|
|||
|
|
WaveFront: /dev/sequencer{,2} and other hardware-dependent interfaces
|
|||
|
|
***********************************************************************/
|
|||
|
|
|
|||
|
|
static void
|
|||
|
|
process_sample_hdr (UCHAR8 *buf)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
wavefront_sample s;
|
|||
|
|
UCHAR8 *ptr;
|
|||
|
|
|
|||
|
|
ptr = buf;
|
|||
|
|
|
|||
|
|
/* The board doesn't send us an exact copy of a "wavefront_sample"
|
|||
|
|
in response to an Upload Sample Header command. Instead, we
|
|||
|
|
have to convert the data format back into our data structure,
|
|||
|
|
just as in the Download Sample command, where we have to do
|
|||
|
|
something very similar in the reverse direction.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
*((UINT32 *) &s.sampleStartOffset) = demunge_int32 (ptr, 4); ptr += 4;
|
|||
|
|
*((UINT32 *) &s.loopStartOffset) = demunge_int32 (ptr, 4); ptr += 4;
|
|||
|
|
*((UINT32 *) &s.loopEndOffset) = demunge_int32 (ptr, 4); ptr += 4;
|
|||
|
|
*((UINT32 *) &s.sampleEndOffset) = demunge_int32 (ptr, 4); ptr += 4;
|
|||
|
|
*((UINT32 *) &s.FrequencyBias) = demunge_int32 (ptr, 3); ptr += 3;
|
|||
|
|
|
|||
|
|
s.SampleResolution = *ptr & 0x3;
|
|||
|
|
s.Loop = *ptr & 0x8;
|
|||
|
|
s.Bidirectional = *ptr & 0x10;
|
|||
|
|
s.Reverse = *ptr & 0x40;
|
|||
|
|
|
|||
|
|
/* Now copy it back to where it came from */
|
|||
|
|
|
|||
|
|
memcpy (buf, (unsigned char *) &s, sizeof (wavefront_sample));
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_synth_control (int cmd, wavefront_control *wc)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char patchnumbuf[2];
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
DPRINT (WF_DEBUG_CMD, "synth control with "
|
|||
|
|
"cmd 0x%x\n", wc->cmd);
|
|||
|
|
|
|||
|
|
/* Pre-handling of or for various commands */
|
|||
|
|
|
|||
|
|
switch (wc->cmd) {
|
|||
|
|
case WFC_DISABLE_INTERRUPTS:
|
|||
|
|
printk (KERN_INFO LOGNAME "interrupts disabled.\n");
|
|||
|
|
outb (0x80|0x20, dev.control_port);
|
|||
|
|
dev.interrupts_on = 0;
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_ENABLE_INTERRUPTS:
|
|||
|
|
printk (KERN_INFO LOGNAME "interrupts enabled.\n");
|
|||
|
|
outb (0x80|0x40|0x20, dev.control_port);
|
|||
|
|
dev.interrupts_on = 1;
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_INTERRUPT_STATUS:
|
|||
|
|
wc->rbuf[0] = dev.interrupts_on;
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_ROMSAMPLES_RDONLY:
|
|||
|
|
dev.rom_samples_rdonly = wc->wbuf[0];
|
|||
|
|
wc->status = 0;
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_IDENTIFY_SLOT_TYPE:
|
|||
|
|
i = wc->wbuf[0] | (wc->wbuf[1] << 7);
|
|||
|
|
if (i <0 || i >= WF_MAX_SAMPLE) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "invalid slot ID %d\n",
|
|||
|
|
i);
|
|||
|
|
wc->status = EINVAL;
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
wc->rbuf[0] = dev.sample_status[i];
|
|||
|
|
wc->status = 0;
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_DEBUG_DRIVER:
|
|||
|
|
dev.debug = wc->wbuf[0];
|
|||
|
|
printk (KERN_INFO LOGNAME "debug = 0x%x\n", dev.debug);
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_FX_IOCTL:
|
|||
|
|
wffx_ioctl ((wavefront_fx_info *) &wc->wbuf[0]);
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_PATCH:
|
|||
|
|
munge_int32 (*((UINT32 *) wc->wbuf), patchnumbuf, 2);
|
|||
|
|
memcpy (wc->wbuf, patchnumbuf, 2);
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_MULTISAMPLE:
|
|||
|
|
/* multisamples have to be handled differently, and
|
|||
|
|
cannot be dealt with properly by wavefront_cmd() alone.
|
|||
|
|
*/
|
|||
|
|
wc->status = wavefront_fetch_multisample
|
|||
|
|
((wavefront_patch_info *) wc->rbuf);
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_SAMPLE_ALIAS:
|
|||
|
|
printk (KERN_INFO LOGNAME "support for sample alias upload "
|
|||
|
|
"being considered.\n");
|
|||
|
|
wc->status = EINVAL;
|
|||
|
|
return -EINVAL;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
wc->status = wavefront_cmd (wc->cmd, wc->rbuf, wc->wbuf);
|
|||
|
|
|
|||
|
|
/* Post-handling of certain commands.
|
|||
|
|
|
|||
|
|
In particular, if the command was an upload, demunge the data
|
|||
|
|
so that the user-level doesn't have to think about it.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (wc->status == 0) {
|
|||
|
|
switch (wc->cmd) {
|
|||
|
|
/* intercept any freemem requests so that we know
|
|||
|
|
we are always current with the user-level view
|
|||
|
|
of things.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
case WFC_REPORT_FREE_MEMORY:
|
|||
|
|
dev.freemem = demunge_int32 (wc->rbuf, 4);
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_PATCH:
|
|||
|
|
demunge_buf (wc->rbuf, wc->rbuf, WF_PATCH_BYTES);
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_PROGRAM:
|
|||
|
|
demunge_buf (wc->rbuf, wc->rbuf, WF_PROGRAM_BYTES);
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_EDRUM_PROGRAM:
|
|||
|
|
demunge_buf (wc->rbuf, wc->rbuf, WF_DRUM_BYTES - 1);
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_SAMPLE_HEADER:
|
|||
|
|
process_sample_hdr (wc->rbuf);
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_UPLOAD_SAMPLE_ALIAS:
|
|||
|
|
printk (KERN_INFO LOGNAME "support for "
|
|||
|
|
"sample aliases still "
|
|||
|
|
"being considered.\n");
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_VMIDI_OFF:
|
|||
|
|
if (virtual_midi_disable () < 0) {
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case WFC_VMIDI_ON:
|
|||
|
|
if (virtual_midi_enable () < 0) {
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
|
|||
|
|
/***********************************************************************/
|
|||
|
|
/* WaveFront: Linux file system interface (for access via raw synth) */
|
|||
|
|
/***********************************************************************/
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_open (struct inode *inode, struct file *file)
|
|||
|
|
{
|
|||
|
|
/* XXX fix me */
|
|||
|
|
dev.opened = file->f_flags;
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_release(struct inode *inode, struct file *file)
|
|||
|
|
{
|
|||
|
|
lock_kernel();
|
|||
|
|
dev.opened = 0;
|
|||
|
|
dev.debug = 0;
|
|||
|
|
unlock_kernel();
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_ioctl(struct inode *inode, struct file *file,
|
|||
|
|
unsigned int cmd, unsigned long arg)
|
|||
|
|
{
|
|||
|
|
wavefront_control wc;
|
|||
|
|
int err;
|
|||
|
|
|
|||
|
|
switch (cmd) {
|
|||
|
|
|
|||
|
|
case WFCTL_WFCMD:
|
|||
|
|
if (copy_from_user(&wc, (void __user *) arg, sizeof (wc)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
|
|||
|
|
if ((err = wavefront_synth_control (cmd, &wc)) == 0) {
|
|||
|
|
if (copy_to_user ((void __user *) arg, &wc, sizeof (wc)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return err;
|
|||
|
|
|
|||
|
|
case WFCTL_LOAD_SPP:
|
|||
|
|
return wavefront_load_patch ((const char __user *) arg);
|
|||
|
|
|
|||
|
|
default:
|
|||
|
|
printk (KERN_WARNING LOGNAME "invalid ioctl %#x\n", cmd);
|
|||
|
|
return -(EINVAL);
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static /*const*/ struct file_operations wavefront_fops = {
|
|||
|
|
.owner = THIS_MODULE,
|
|||
|
|
.llseek = no_llseek,
|
|||
|
|
.ioctl = wavefront_ioctl,
|
|||
|
|
.open = wavefront_open,
|
|||
|
|
.release = wavefront_release,
|
|||
|
|
};
|
|||
|
|
|
|||
|
|
|
|||
|
|
/***********************************************************************/
|
|||
|
|
/* WaveFront: OSS installation and support interface */
|
|||
|
|
/***********************************************************************/
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
|
|||
|
|
static struct synth_info wavefront_info =
|
|||
|
|
{"Turtle Beach WaveFront", 0, SYNTH_TYPE_SAMPLE, SAMPLE_TYPE_WAVEFRONT,
|
|||
|
|
0, 32, 0, 0, SYNTH_CAP_INPUT};
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_oss_open (int devno, int mode)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
dev.opened = mode;
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static void
|
|||
|
|
wavefront_oss_close (int devno)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
dev.opened = 0;
|
|||
|
|
dev.debug = 0;
|
|||
|
|
return;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_oss_ioctl (int devno, unsigned int cmd, void __user * arg)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
wavefront_control wc;
|
|||
|
|
int err;
|
|||
|
|
|
|||
|
|
switch (cmd) {
|
|||
|
|
case SNDCTL_SYNTH_INFO:
|
|||
|
|
if(copy_to_user(arg, &wavefront_info, sizeof (wavefront_info)))
|
|||
|
|
return -EFAULT;
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case SNDCTL_SEQ_RESETSAMPLES:
|
|||
|
|
// printk (KERN_WARNING LOGNAME "driver cannot reset samples.\n");
|
|||
|
|
return 0; /* don't force an error */
|
|||
|
|
|
|||
|
|
case SNDCTL_SEQ_PERCMODE:
|
|||
|
|
return 0; /* don't force an error */
|
|||
|
|
|
|||
|
|
case SNDCTL_SYNTH_MEMAVL:
|
|||
|
|
if ((dev.freemem = wavefront_freemem ()) < 0) {
|
|||
|
|
printk (KERN_ERR LOGNAME "cannot get memory size\n");
|
|||
|
|
return -EIO;
|
|||
|
|
} else {
|
|||
|
|
return dev.freemem;
|
|||
|
|
}
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
case SNDCTL_SYNTH_CONTROL:
|
|||
|
|
if(copy_from_user (&wc, arg, sizeof (wc)))
|
|||
|
|
err = -EFAULT;
|
|||
|
|
else if ((err = wavefront_synth_control (cmd, &wc)) == 0) {
|
|||
|
|
if(copy_to_user (arg, &wc, sizeof (wc)))
|
|||
|
|
err = -EFAULT;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return err;
|
|||
|
|
|
|||
|
|
default:
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_oss_load_patch (int devno, int format, const char __user *addr,
|
|||
|
|
int offs, int count, int pmgr_flag)
|
|||
|
|
{
|
|||
|
|
|
|||
|
|
if (format == SYSEX_PATCH) { /* Handled by midi_synth.c */
|
|||
|
|
if (midi_load_patch == NULL) {
|
|||
|
|
printk (KERN_ERR LOGNAME
|
|||
|
|
"SYSEX not loadable: "
|
|||
|
|
"no midi patch loader!\n");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return midi_load_patch (devno, format, addr,
|
|||
|
|
offs, count, pmgr_flag);
|
|||
|
|
|
|||
|
|
} else if (format == GUS_PATCH) {
|
|||
|
|
return wavefront_load_gus_patch (devno, format,
|
|||
|
|
addr, offs, count, pmgr_flag);
|
|||
|
|
|
|||
|
|
} else if (format != WAVEFRONT_PATCH) {
|
|||
|
|
printk (KERN_ERR LOGNAME "unknown patch format %d\n", format);
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (count < sizeof (wavefront_patch_info)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "sample header too short\n");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* "addr" points to a user-space wavefront_patch_info */
|
|||
|
|
|
|||
|
|
return wavefront_load_patch (addr);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static struct synth_operations wavefront_operations =
|
|||
|
|
{
|
|||
|
|
.owner = THIS_MODULE,
|
|||
|
|
.id = "WaveFront",
|
|||
|
|
.info = &wavefront_info,
|
|||
|
|
.midi_dev = 0,
|
|||
|
|
.synth_type = SYNTH_TYPE_SAMPLE,
|
|||
|
|
.synth_subtype = SAMPLE_TYPE_WAVEFRONT,
|
|||
|
|
.open = wavefront_oss_open,
|
|||
|
|
.close = wavefront_oss_close,
|
|||
|
|
.ioctl = wavefront_oss_ioctl,
|
|||
|
|
.kill_note = midi_synth_kill_note,
|
|||
|
|
.start_note = midi_synth_start_note,
|
|||
|
|
.set_instr = midi_synth_set_instr,
|
|||
|
|
.reset = midi_synth_reset,
|
|||
|
|
.load_patch = midi_synth_load_patch,
|
|||
|
|
.aftertouch = midi_synth_aftertouch,
|
|||
|
|
.controller = midi_synth_controller,
|
|||
|
|
.panning = midi_synth_panning,
|
|||
|
|
.bender = midi_synth_bender,
|
|||
|
|
.setup_voice = midi_synth_setup_voice
|
|||
|
|
};
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_STATIC_INSTALL
|
|||
|
|
|
|||
|
|
static void __init attach_wavefront (struct address_info *hw_config)
|
|||
|
|
{
|
|||
|
|
(void) install_wavefront ();
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init probe_wavefront (struct address_info *hw_config)
|
|||
|
|
{
|
|||
|
|
return !detect_wavefront (hw_config->irq, hw_config->io_base);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static void __exit unload_wavefront (struct address_info *hw_config)
|
|||
|
|
{
|
|||
|
|
(void) uninstall_wavefront ();
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
#endif /* OSS_SUPPORT_STATIC_INSTALL */
|
|||
|
|
|
|||
|
|
/***********************************************************************/
|
|||
|
|
/* WaveFront: Linux modular sound kernel installation interface */
|
|||
|
|
/***********************************************************************/
|
|||
|
|
|
|||
|
|
static irqreturn_t
|
|||
|
|
wavefrontintr(int irq, void *dev_id, struct pt_regs *dummy)
|
|||
|
|
{
|
|||
|
|
struct wf_config *hw = dev_id;
|
|||
|
|
|
|||
|
|
/*
|
|||
|
|
Some comments on interrupts. I attempted a version of this
|
|||
|
|
driver that used interrupts throughout the code instead of
|
|||
|
|
doing busy and/or sleep-waiting. Alas, it appears that once
|
|||
|
|
the Motorola firmware is downloaded, the card *never*
|
|||
|
|
generates an RX interrupt. These are successfully generated
|
|||
|
|
during firmware loading, and after that wavefront_status()
|
|||
|
|
reports that an interrupt is pending on the card from time
|
|||
|
|
to time, but it never seems to be delivered to this
|
|||
|
|
driver. Note also that wavefront_status() continues to
|
|||
|
|
report that RX interrupts are enabled, suggesting that I
|
|||
|
|
didn't goof up and disable them by mistake.
|
|||
|
|
|
|||
|
|
Thus, I stepped back to a prior version of
|
|||
|
|
wavefront_wait(), the only place where this really
|
|||
|
|
matters. Its sad, but I've looked through the code to check
|
|||
|
|
on things, and I really feel certain that the Motorola
|
|||
|
|
firmware prevents RX-ready interrupts.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if ((wavefront_status() & (STAT_INTR_READ|STAT_INTR_WRITE)) == 0) {
|
|||
|
|
return IRQ_NONE;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
hw->irq_ok = 1;
|
|||
|
|
hw->irq_cnt++;
|
|||
|
|
wake_up_interruptible (&hw->interrupt_sleeper);
|
|||
|
|
return IRQ_HANDLED;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* STATUS REGISTER
|
|||
|
|
|
|||
|
|
0 Host Rx Interrupt Enable (1=Enabled)
|
|||
|
|
1 Host Rx Register Full (1=Full)
|
|||
|
|
2 Host Rx Interrupt Pending (1=Interrupt)
|
|||
|
|
3 Unused
|
|||
|
|
4 Host Tx Interrupt (1=Enabled)
|
|||
|
|
5 Host Tx Register empty (1=Empty)
|
|||
|
|
6 Host Tx Interrupt Pending (1=Interrupt)
|
|||
|
|
7 Unused
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_interrupt_bits (int irq)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int bits;
|
|||
|
|
|
|||
|
|
switch (irq) {
|
|||
|
|
case 9:
|
|||
|
|
bits = 0x00;
|
|||
|
|
break;
|
|||
|
|
case 5:
|
|||
|
|
bits = 0x08;
|
|||
|
|
break;
|
|||
|
|
case 12:
|
|||
|
|
bits = 0x10;
|
|||
|
|
break;
|
|||
|
|
case 15:
|
|||
|
|
bits = 0x18;
|
|||
|
|
break;
|
|||
|
|
|
|||
|
|
default:
|
|||
|
|
printk (KERN_WARNING LOGNAME "invalid IRQ %d\n", irq);
|
|||
|
|
bits = -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return bits;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static void
|
|||
|
|
wavefront_should_cause_interrupt (int val, int port, int timeout)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned long flags;
|
|||
|
|
|
|||
|
|
/* this will not help on SMP - but at least it compiles */
|
|||
|
|
spin_lock_irqsave(&lock, flags);
|
|||
|
|
dev.irq_ok = 0;
|
|||
|
|
outb (val,port);
|
|||
|
|
interruptible_sleep_on_timeout (&dev.interrupt_sleeper, timeout);
|
|||
|
|
spin_unlock_irqrestore(&lock,flags);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init wavefront_hw_reset (void)
|
|||
|
|
{
|
|||
|
|
int bits;
|
|||
|
|
int hwv[2];
|
|||
|
|
unsigned long irq_mask;
|
|||
|
|
short reported_irq;
|
|||
|
|
|
|||
|
|
/* IRQ already checked in init_module() */
|
|||
|
|
|
|||
|
|
bits = wavefront_interrupt_bits (dev.irq);
|
|||
|
|
|
|||
|
|
printk (KERN_DEBUG LOGNAME "autodetecting WaveFront IRQ\n");
|
|||
|
|
|
|||
|
|
irq_mask = probe_irq_on ();
|
|||
|
|
|
|||
|
|
outb (0x0, dev.control_port);
|
|||
|
|
outb (0x80 | 0x40 | bits, dev.data_port);
|
|||
|
|
wavefront_should_cause_interrupt(0x80|0x40|0x10|0x1,
|
|||
|
|
dev.control_port,
|
|||
|
|
(reset_time*HZ)/100);
|
|||
|
|
|
|||
|
|
reported_irq = probe_irq_off (irq_mask);
|
|||
|
|
|
|||
|
|
if (reported_irq != dev.irq) {
|
|||
|
|
if (reported_irq == 0) {
|
|||
|
|
printk (KERN_ERR LOGNAME
|
|||
|
|
"No unassigned interrupts detected "
|
|||
|
|
"after h/w reset\n");
|
|||
|
|
} else if (reported_irq < 0) {
|
|||
|
|
printk (KERN_ERR LOGNAME
|
|||
|
|
"Multiple unassigned interrupts detected "
|
|||
|
|
"after h/w reset\n");
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_ERR LOGNAME "autodetected IRQ %d not the "
|
|||
|
|
"value provided (%d)\n", reported_irq,
|
|||
|
|
dev.irq);
|
|||
|
|
}
|
|||
|
|
dev.irq = -1;
|
|||
|
|
return 1;
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_INFO LOGNAME "autodetected IRQ at %d\n",
|
|||
|
|
reported_irq);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (request_irq (dev.irq, wavefrontintr,
|
|||
|
|
SA_INTERRUPT|SA_SHIRQ,
|
|||
|
|
"wavefront synth", &dev) < 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "IRQ %d not available!\n",
|
|||
|
|
dev.irq);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* try reset of port */
|
|||
|
|
|
|||
|
|
outb (0x0, dev.control_port);
|
|||
|
|
|
|||
|
|
/* At this point, the board is in reset, and the H/W initialization
|
|||
|
|
register is accessed at the same address as the data port.
|
|||
|
|
|
|||
|
|
Bit 7 - Enable IRQ Driver
|
|||
|
|
0 - Tri-state the Wave-Board drivers for the PC Bus IRQs
|
|||
|
|
1 - Enable IRQ selected by bits 5:3 to be driven onto the PC Bus.
|
|||
|
|
|
|||
|
|
Bit 6 - MIDI Interface Select
|
|||
|
|
|
|||
|
|
0 - Use the MIDI Input from the 26-pin WaveBlaster
|
|||
|
|
compatible header as the serial MIDI source
|
|||
|
|
1 - Use the MIDI Input from the 9-pin D connector as the
|
|||
|
|
serial MIDI source.
|
|||
|
|
|
|||
|
|
Bits 5:3 - IRQ Selection
|
|||
|
|
0 0 0 - IRQ 2/9
|
|||
|
|
0 0 1 - IRQ 5
|
|||
|
|
0 1 0 - IRQ 12
|
|||
|
|
0 1 1 - IRQ 15
|
|||
|
|
1 0 0 - Reserved
|
|||
|
|
1 0 1 - Reserved
|
|||
|
|
1 1 0 - Reserved
|
|||
|
|
1 1 1 - Reserved
|
|||
|
|
|
|||
|
|
Bits 2:1 - Reserved
|
|||
|
|
Bit 0 - Disable Boot ROM
|
|||
|
|
0 - memory accesses to 03FC30-03FFFFH utilize the internal Boot ROM
|
|||
|
|
1 - memory accesses to 03FC30-03FFFFH are directed to external
|
|||
|
|
storage.
|
|||
|
|
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
/* configure hardware: IRQ, enable interrupts,
|
|||
|
|
plus external 9-pin MIDI interface selected
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
outb (0x80 | 0x40 | bits, dev.data_port);
|
|||
|
|
|
|||
|
|
/* CONTROL REGISTER
|
|||
|
|
|
|||
|
|
0 Host Rx Interrupt Enable (1=Enabled) 0x1
|
|||
|
|
1 Unused 0x2
|
|||
|
|
2 Unused 0x4
|
|||
|
|
3 Unused 0x8
|
|||
|
|
4 Host Tx Interrupt Enable 0x10
|
|||
|
|
5 Mute (0=Mute; 1=Play) 0x20
|
|||
|
|
6 Master Interrupt Enable (1=Enabled) 0x40
|
|||
|
|
7 Master Reset (0=Reset; 1=Run) 0x80
|
|||
|
|
|
|||
|
|
Take us out of reset, mute output, master + TX + RX interrupts on.
|
|||
|
|
|
|||
|
|
We'll get an interrupt presumably to tell us that the TX
|
|||
|
|
register is clear.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
wavefront_should_cause_interrupt(0x80|0x40|0x10|0x1,
|
|||
|
|
dev.control_port,
|
|||
|
|
(reset_time*HZ)/100);
|
|||
|
|
|
|||
|
|
/* Note: data port is now the data port, not the h/w initialization
|
|||
|
|
port.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (!dev.irq_ok) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"intr not received after h/w un-reset.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.interrupts_on = 1;
|
|||
|
|
|
|||
|
|
/* Note: data port is now the data port, not the h/w initialization
|
|||
|
|
port.
|
|||
|
|
|
|||
|
|
At this point, only "HW VERSION" or "DOWNLOAD OS" commands
|
|||
|
|
will work. So, issue one of them, and wait for TX
|
|||
|
|
interrupt. This can take a *long* time after a cold boot,
|
|||
|
|
while the ISC ROM does its RAM test. The SDK says up to 4
|
|||
|
|
seconds - with 12MB of RAM on a Tropez+, it takes a lot
|
|||
|
|
longer than that (~16secs). Note that the card understands
|
|||
|
|
the difference between a warm and a cold boot, so
|
|||
|
|
subsequent ISC2115 reboots (say, caused by module
|
|||
|
|
reloading) will get through this much faster.
|
|||
|
|
|
|||
|
|
XXX Interesting question: why is no RX interrupt received first ?
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
wavefront_should_cause_interrupt(WFC_HARDWARE_VERSION,
|
|||
|
|
dev.data_port, ramcheck_time*HZ);
|
|||
|
|
|
|||
|
|
if (!dev.irq_ok) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"post-RAM-check interrupt not received.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (!wavefront_wait (STAT_CAN_READ)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"no response to HW version cmd.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if ((hwv[0] = wavefront_read ()) == -1) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"board not responding correctly.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (hwv[0] == 0xFF) { /* NAK */
|
|||
|
|
|
|||
|
|
/* Board's RAM test failed. Try to read error code,
|
|||
|
|
and tell us about it either way.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if ((hwv[0] = wavefront_read ()) == -1) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "on-board RAM test failed "
|
|||
|
|
"(bad error code).\n");
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_WARNING LOGNAME "on-board RAM test failed "
|
|||
|
|
"(error code: 0x%x).\n",
|
|||
|
|
hwv[0]);
|
|||
|
|
}
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* We're OK, just get the next byte of the HW version response */
|
|||
|
|
|
|||
|
|
if ((hwv[1] = wavefront_read ()) == -1) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "incorrect h/w response.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
printk (KERN_INFO LOGNAME "hardware version %d.%d\n",
|
|||
|
|
hwv[0], hwv[1]);
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
|
|||
|
|
gone_bad:
|
|||
|
|
if (dev.irq >= 0) {
|
|||
|
|
free_irq (dev.irq, &dev);
|
|||
|
|
dev.irq = -1;
|
|||
|
|
}
|
|||
|
|
return (1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init detect_wavefront (int irq, int io_base)
|
|||
|
|
{
|
|||
|
|
unsigned char rbuf[4], wbuf[4];
|
|||
|
|
|
|||
|
|
/* TB docs say the device takes up 8 ports, but we know that
|
|||
|
|
if there is an FX device present (i.e. a Tropez+) it really
|
|||
|
|
consumes 16.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (check_region (io_base, 16)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "IO address range 0x%x - 0x%x "
|
|||
|
|
"already in use - ignored\n", dev.base,
|
|||
|
|
dev.base+15);
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.irq = irq;
|
|||
|
|
dev.base = io_base;
|
|||
|
|
dev.israw = 0;
|
|||
|
|
dev.debug = debug_default;
|
|||
|
|
dev.interrupts_on = 0;
|
|||
|
|
dev.irq_cnt = 0;
|
|||
|
|
dev.rom_samples_rdonly = 1; /* XXX default lock on ROM sample slots */
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_FIRMWARE_VERSION, rbuf, wbuf) == 0) {
|
|||
|
|
|
|||
|
|
dev.fw_version[0] = rbuf[0];
|
|||
|
|
dev.fw_version[1] = rbuf[1];
|
|||
|
|
printk (KERN_INFO LOGNAME
|
|||
|
|
"firmware %d.%d already loaded.\n",
|
|||
|
|
rbuf[0], rbuf[1]);
|
|||
|
|
|
|||
|
|
/* check that a command actually works */
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_HARDWARE_VERSION,
|
|||
|
|
rbuf, wbuf) == 0) {
|
|||
|
|
dev.hw_version[0] = rbuf[0];
|
|||
|
|
dev.hw_version[1] = rbuf[1];
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_WARNING LOGNAME "not raw, but no "
|
|||
|
|
"hardware version!\n");
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (!wf_raw) {
|
|||
|
|
return 1;
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_INFO LOGNAME
|
|||
|
|
"reloading firmware anyway.\n");
|
|||
|
|
dev.israw = 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
|
|||
|
|
dev.israw = 1;
|
|||
|
|
printk (KERN_INFO LOGNAME
|
|||
|
|
"no response to firmware probe, assume raw.\n");
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
init_waitqueue_head (&dev.interrupt_sleeper);
|
|||
|
|
|
|||
|
|
if (wavefront_hw_reset ()) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "hardware reset failed\n");
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Check for FX device, present only on Tropez+ */
|
|||
|
|
|
|||
|
|
dev.has_fx = (detect_wffx () == 0);
|
|||
|
|
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
#include "os.h"
|
|||
|
|
#include <linux/fs.h>
|
|||
|
|
#include <linux/mm.h>
|
|||
|
|
#include <linux/slab.h>
|
|||
|
|
#include <asm/uaccess.h>
|
|||
|
|
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wavefront_download_firmware (char *path)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned char section[WF_SECTION_MAX];
|
|||
|
|
char section_length; /* yes, just a char; max value is WF_SECTION_MAX */
|
|||
|
|
int section_cnt_downloaded = 0;
|
|||
|
|
int fd;
|
|||
|
|
int c;
|
|||
|
|
int i;
|
|||
|
|
mm_segment_t fs;
|
|||
|
|
|
|||
|
|
/* This tries to be a bit cleverer than the stuff Alan Cox did for
|
|||
|
|
the generic sound firmware, in that it actually knows
|
|||
|
|
something about the structure of the Motorola firmware. In
|
|||
|
|
particular, it uses a version that has been stripped of the
|
|||
|
|
20K of useless header information, and had section lengths
|
|||
|
|
added, making it possible to load the entire OS without any
|
|||
|
|
[kv]malloc() activity, since the longest entity we ever read is
|
|||
|
|
42 bytes (well, WF_SECTION_MAX) long.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
fs = get_fs();
|
|||
|
|
set_fs (get_ds());
|
|||
|
|
|
|||
|
|
if ((fd = sys_open (path, 0, 0)) < 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "Unable to load \"%s\".\n",
|
|||
|
|
path);
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
while (1) {
|
|||
|
|
int x;
|
|||
|
|
|
|||
|
|
if ((x = sys_read (fd, §ion_length, sizeof (section_length))) !=
|
|||
|
|
sizeof (section_length)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "firmware read error.\n");
|
|||
|
|
goto failure;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (section_length == 0) {
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (sys_read (fd, section, section_length) != section_length) {
|
|||
|
|
printk (KERN_ERR LOGNAME "firmware section "
|
|||
|
|
"read error.\n");
|
|||
|
|
goto failure;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Send command */
|
|||
|
|
|
|||
|
|
if (wavefront_write (WFC_DOWNLOAD_OS)) {
|
|||
|
|
goto failure;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0; i < section_length; i++) {
|
|||
|
|
if (wavefront_write (section[i])) {
|
|||
|
|
goto failure;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* get ACK */
|
|||
|
|
|
|||
|
|
if (wavefront_wait (STAT_CAN_READ)) {
|
|||
|
|
|
|||
|
|
if ((c = inb (dev.data_port)) != WF_ACK) {
|
|||
|
|
|
|||
|
|
printk (KERN_ERR LOGNAME "download "
|
|||
|
|
"of section #%d not "
|
|||
|
|
"acknowledged, ack = 0x%x\n",
|
|||
|
|
section_cnt_downloaded + 1, c);
|
|||
|
|
goto failure;
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
printk (KERN_ERR LOGNAME "time out for firmware ACK.\n");
|
|||
|
|
goto failure;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
sys_close (fd);
|
|||
|
|
set_fs (fs);
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
failure:
|
|||
|
|
sys_close (fd);
|
|||
|
|
set_fs (fs);
|
|||
|
|
printk (KERN_ERR "\nWaveFront: firmware download failed!!!\n");
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init wavefront_config_midi (void)
|
|||
|
|
{
|
|||
|
|
unsigned char rbuf[4], wbuf[4];
|
|||
|
|
|
|||
|
|
if (detect_wf_mpu (dev.irq, dev.base) < 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"could not find working MIDI device\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if ((dev.mididev = install_wf_mpu ()) < 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"MIDI interfaces not configured\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Route external MIDI to WaveFront synth (by default) */
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_MISYNTH_ON, rbuf, wbuf)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"cannot enable MIDI-IN to synth routing.\n");
|
|||
|
|
/* XXX error ? */
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
/* Get the regular MIDI patch loading function, so we can
|
|||
|
|
use it if we ever get handed a SYSEX patch. This is
|
|||
|
|
unlikely, because its so damn slow, but we may as well
|
|||
|
|
leave this functionality from maui.c behind, since it
|
|||
|
|
could be useful for sequencer applications that can
|
|||
|
|
only use MIDI to do patch loading.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (midi_devs[dev.mididev]->converter != NULL) {
|
|||
|
|
midi_load_patch = midi_devs[dev.mididev]->converter->load_patch;
|
|||
|
|
midi_devs[dev.mididev]->converter->load_patch =
|
|||
|
|
&wavefront_oss_load_patch;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
|
|||
|
|
/* Turn on Virtual MIDI, but first *always* turn it off,
|
|||
|
|
since otherwise consectutive reloads of the driver will
|
|||
|
|
never cause the hardware to generate the initial "internal" or
|
|||
|
|
"external" source bytes in the MIDI data stream. This
|
|||
|
|
is pretty important, since the internal hardware generally will
|
|||
|
|
be used to generate none or very little MIDI output, and
|
|||
|
|
thus the only source of MIDI data is actually external. Without
|
|||
|
|
the switch bytes, the driver will think it all comes from
|
|||
|
|
the internal interface. Duh.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_VMIDI_OFF, rbuf, wbuf)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"virtual MIDI mode not disabled\n");
|
|||
|
|
return 0; /* We're OK, but missing the external MIDI dev */
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if ((dev.ext_mididev = virtual_midi_enable ()) < 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "no virtual MIDI access.\n");
|
|||
|
|
} else {
|
|||
|
|
if (wavefront_cmd (WFC_VMIDI_ON, rbuf, wbuf)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"cannot enable virtual MIDI mode.\n");
|
|||
|
|
virtual_midi_disable ();
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init wavefront_do_reset (int atboot)
|
|||
|
|
{
|
|||
|
|
char voices[1];
|
|||
|
|
|
|||
|
|
if (!atboot && wavefront_hw_reset ()) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "hw reset failed.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (dev.israw) {
|
|||
|
|
if (wavefront_download_firmware (ospath)) {
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
dev.israw = 0;
|
|||
|
|
|
|||
|
|
/* Wait for the OS to get running. The protocol for
|
|||
|
|
this is non-obvious, and was determined by
|
|||
|
|
using port-IO tracing in DOSemu and some
|
|||
|
|
experimentation here.
|
|||
|
|
|
|||
|
|
Rather than using timed waits, use interrupts creatively.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
wavefront_should_cause_interrupt (WFC_NOOP,
|
|||
|
|
dev.data_port,
|
|||
|
|
(osrun_time*HZ));
|
|||
|
|
|
|||
|
|
if (!dev.irq_ok) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"no post-OS interrupt.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Now, do it again ! */
|
|||
|
|
|
|||
|
|
wavefront_should_cause_interrupt (WFC_NOOP,
|
|||
|
|
dev.data_port, (10*HZ));
|
|||
|
|
|
|||
|
|
if (!dev.irq_ok) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"no post-OS interrupt(2).\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* OK, no (RX/TX) interrupts any more, but leave mute
|
|||
|
|
in effect.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
outb (0x80|0x40, dev.control_port);
|
|||
|
|
|
|||
|
|
/* No need for the IRQ anymore */
|
|||
|
|
|
|||
|
|
free_irq (dev.irq, &dev);
|
|||
|
|
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (dev.has_fx && fx_raw) {
|
|||
|
|
wffx_init ();
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* SETUPSND.EXE asks for sample memory config here, but since i
|
|||
|
|
have no idea how to interpret the result, we'll forget
|
|||
|
|
about it.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if ((dev.freemem = wavefront_freemem ()) < 0) {
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
printk (KERN_INFO LOGNAME "available DRAM %dk\n", dev.freemem / 1024);
|
|||
|
|
|
|||
|
|
if (wavefront_write (0xf0) ||
|
|||
|
|
wavefront_write (1) ||
|
|||
|
|
(wavefront_read () < 0)) {
|
|||
|
|
dev.debug = 0;
|
|||
|
|
printk (KERN_WARNING LOGNAME "MPU emulation mode not set.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
voices[0] = 32;
|
|||
|
|
|
|||
|
|
if (wavefront_cmd (WFC_SET_NVOICES, NULL, voices)) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"cannot set number of voices to 32.\n");
|
|||
|
|
goto gone_bad;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
gone_bad:
|
|||
|
|
/* reset that sucker so that it doesn't bother us. */
|
|||
|
|
|
|||
|
|
outb (0x0, dev.control_port);
|
|||
|
|
dev.interrupts_on = 0;
|
|||
|
|
if (dev.irq >= 0) {
|
|||
|
|
free_irq (dev.irq, &dev);
|
|||
|
|
}
|
|||
|
|
return 1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init wavefront_init (int atboot)
|
|||
|
|
{
|
|||
|
|
int samples_are_from_rom;
|
|||
|
|
|
|||
|
|
if (dev.israw) {
|
|||
|
|
samples_are_from_rom = 1;
|
|||
|
|
} else {
|
|||
|
|
/* XXX is this always true ? */
|
|||
|
|
samples_are_from_rom = 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (dev.israw || fx_raw) {
|
|||
|
|
if (wavefront_do_reset (atboot)) {
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
wavefront_get_sample_status (samples_are_from_rom);
|
|||
|
|
wavefront_get_program_status ();
|
|||
|
|
wavefront_get_patch_status ();
|
|||
|
|
|
|||
|
|
/* Start normal operation: unreset, master interrupt enabled, no mute
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
outb (0x80|0x40|0x20, dev.control_port);
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int __init install_wavefront (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
if ((dev.synth_dev = register_sound_synth (&wavefront_fops, -1)) < 0) {
|
|||
|
|
printk (KERN_ERR LOGNAME "cannot register raw synth\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
if ((dev.oss_dev = sound_alloc_synthdev()) == -1) {
|
|||
|
|
printk (KERN_ERR LOGNAME "Too many sequencers\n");
|
|||
|
|
return -1;
|
|||
|
|
} else {
|
|||
|
|
synth_devs[dev.oss_dev] = &wavefront_operations;
|
|||
|
|
}
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
|
|||
|
|
if (wavefront_init (1) < 0) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "initialization failed.\n");
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
sound_unload_synthdev (dev.oss_dev);
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
request_region (dev.base+2, 6, "wavefront synth");
|
|||
|
|
|
|||
|
|
if (dev.has_fx) {
|
|||
|
|
request_region (dev.base+8, 8, "wavefront fx");
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (wavefront_config_midi ()) {
|
|||
|
|
printk (KERN_WARNING LOGNAME "could not initialize MIDI.\n");
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return dev.oss_dev;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static void __exit uninstall_wavefront (void)
|
|||
|
|
{
|
|||
|
|
/* the first two i/o addresses are freed by the wf_mpu code */
|
|||
|
|
release_region (dev.base+2, 6);
|
|||
|
|
|
|||
|
|
if (dev.has_fx) {
|
|||
|
|
release_region (dev.base+8, 8);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
unregister_sound_synth (dev.synth_dev);
|
|||
|
|
|
|||
|
|
#if OSS_SUPPORT_LEVEL & OSS_SUPPORT_SEQ
|
|||
|
|
sound_unload_synthdev (dev.oss_dev);
|
|||
|
|
#endif /* OSS_SUPPORT_SEQ */
|
|||
|
|
uninstall_wf_mpu ();
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/***********************************************************************/
|
|||
|
|
/* WaveFront FX control */
|
|||
|
|
/***********************************************************************/
|
|||
|
|
|
|||
|
|
#include "yss225.h"
|
|||
|
|
|
|||
|
|
/* Control bits for the Load Control Register
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#define FX_LSB_TRANSFER 0x01 /* transfer after DSP LSB byte written */
|
|||
|
|
#define FX_MSB_TRANSFER 0x02 /* transfer after DSP MSB byte written */
|
|||
|
|
#define FX_AUTO_INCR 0x04 /* auto-increment DSP address after transfer */
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wffx_idle (void)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
unsigned int x = 0x80;
|
|||
|
|
|
|||
|
|
for (i = 0; i < 1000; i++) {
|
|||
|
|
x = inb (dev.fx_status);
|
|||
|
|
if ((x & 0x80) == 0) {
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (x & 0x80) {
|
|||
|
|
printk (KERN_ERR LOGNAME "FX device never idle.\n");
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return (1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
int __init detect_wffx (void)
|
|||
|
|
{
|
|||
|
|
/* This is a crude check, but its the best one I have for now.
|
|||
|
|
Certainly on the Maui and the Tropez, wffx_idle() will
|
|||
|
|
report "never idle", which suggests that this test should
|
|||
|
|
work OK.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
if (inb (dev.fx_status) & 0x80) {
|
|||
|
|
printk (KERN_INFO LOGNAME "Hmm, probably a Maui or Tropez.\n");
|
|||
|
|
return -1;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
void
|
|||
|
|
wffx_mute (int onoff)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
if (!wffx_idle()) {
|
|||
|
|
return;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (onoff ? 0x02 : 0x00, dev.fx_op);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wffx_memset (int page,
|
|||
|
|
int addr, int cnt, unsigned short *data)
|
|||
|
|
{
|
|||
|
|
if (page < 0 || page > 7) {
|
|||
|
|
printk (KERN_ERR LOGNAME "FX memset: "
|
|||
|
|
"page must be >= 0 and <= 7\n");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (addr < 0 || addr > 0x7f) {
|
|||
|
|
printk (KERN_ERR LOGNAME "FX memset: "
|
|||
|
|
"addr must be >= 0 and <= 7f\n");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (cnt == 1) {
|
|||
|
|
|
|||
|
|
outb (FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (page, dev.fx_dsp_page);
|
|||
|
|
outb (addr, dev.fx_dsp_addr);
|
|||
|
|
outb ((data[0] >> 8), dev.fx_dsp_msb);
|
|||
|
|
outb ((data[0] & 0xff), dev.fx_dsp_lsb);
|
|||
|
|
|
|||
|
|
printk (KERN_INFO LOGNAME "FX: addr %d:%x set to 0x%x\n",
|
|||
|
|
page, addr, data[0]);
|
|||
|
|
|
|||
|
|
} else {
|
|||
|
|
int i;
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (page, dev.fx_dsp_page);
|
|||
|
|
outb (addr, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < cnt; i++) {
|
|||
|
|
outb ((data[i] >> 8), dev.fx_dsp_msb);
|
|||
|
|
outb ((data[i] & 0xff), dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle ()) {
|
|||
|
|
break;
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (i != cnt) {
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"FX memset "
|
|||
|
|
"(0x%x, 0x%x, %p, %d) incomplete\n",
|
|||
|
|
page, addr, data, cnt);
|
|||
|
|
return -(EIO);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int
|
|||
|
|
wffx_ioctl (wavefront_fx_info *r)
|
|||
|
|
|
|||
|
|
{
|
|||
|
|
unsigned short page_data[256];
|
|||
|
|
unsigned short *pd;
|
|||
|
|
|
|||
|
|
switch (r->request) {
|
|||
|
|
case WFFX_MUTE:
|
|||
|
|
wffx_mute (r->data[0]);
|
|||
|
|
return 0;
|
|||
|
|
|
|||
|
|
case WFFX_MEMSET:
|
|||
|
|
|
|||
|
|
if (r->data[2] <= 0) {
|
|||
|
|
printk (KERN_ERR LOGNAME "cannot write "
|
|||
|
|
"<= 0 bytes to FX\n");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
} else if (r->data[2] == 1) {
|
|||
|
|
pd = (unsigned short *) &r->data[3];
|
|||
|
|
} else {
|
|||
|
|
if (r->data[2] > sizeof (page_data)) {
|
|||
|
|
printk (KERN_ERR LOGNAME "cannot write "
|
|||
|
|
"> 255 bytes to FX\n");
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
if (copy_from_user(page_data,
|
|||
|
|
(unsigned char __user *)r->data[3],
|
|||
|
|
r->data[2]))
|
|||
|
|
return -EFAULT;
|
|||
|
|
pd = page_data;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return wffx_memset (r->data[0], /* page */
|
|||
|
|
r->data[1], /* addr */
|
|||
|
|
r->data[2], /* cnt */
|
|||
|
|
pd);
|
|||
|
|
|
|||
|
|
default:
|
|||
|
|
printk (KERN_WARNING LOGNAME
|
|||
|
|
"FX: ioctl %d not yet supported\n",
|
|||
|
|
r->request);
|
|||
|
|
return -(EINVAL);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* YSS225 initialization.
|
|||
|
|
|
|||
|
|
This code was developed using DOSEMU. The Turtle Beach SETUPSND
|
|||
|
|
utility was run with I/O tracing in DOSEMU enabled, and a reconstruction
|
|||
|
|
of the port I/O done, using the Yamaha faxback document as a guide
|
|||
|
|
to add more logic to the code. Its really pretty weird.
|
|||
|
|
|
|||
|
|
There was an alternative approach of just dumping the whole I/O
|
|||
|
|
sequence as a series of port/value pairs and a simple loop
|
|||
|
|
that output it. However, I hope that eventually I'll get more
|
|||
|
|
control over what this code does, and so I tried to stick with
|
|||
|
|
a somewhat "algorithmic" approach.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
static int __init wffx_init (void)
|
|||
|
|
{
|
|||
|
|
int i;
|
|||
|
|
int j;
|
|||
|
|
|
|||
|
|
/* Set all bits for all channels on the MOD unit to zero */
|
|||
|
|
/* XXX But why do this twice ? */
|
|||
|
|
|
|||
|
|
for (j = 0; j < 2; j++) {
|
|||
|
|
for (i = 0x10; i <= 0xff; i++) {
|
|||
|
|
|
|||
|
|
if (!wffx_idle ()) {
|
|||
|
|
return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x0, dev.fx_mod_data);
|
|||
|
|
}
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x02, dev.fx_op); /* mute on */
|
|||
|
|
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x44, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x42, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x43, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x7c, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x7e, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x46, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x49, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x47, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x4a, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
|
|||
|
|
/* either because of stupidity by TB's programmers, or because it
|
|||
|
|
actually does something, rezero the MOD page.
|
|||
|
|
*/
|
|||
|
|
for (i = 0x10; i <= 0xff; i++) {
|
|||
|
|
|
|||
|
|
if (!wffx_idle ()) {
|
|||
|
|
return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x0, dev.fx_mod_data);
|
|||
|
|
}
|
|||
|
|
/* load page zero */
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x00, dev.fx_dsp_page);
|
|||
|
|
outb (0x00, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_zero); i += 2) {
|
|||
|
|
outb (page_zero[i], dev.fx_dsp_msb);
|
|||
|
|
outb (page_zero[i+1], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Now load page one */
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x01, dev.fx_dsp_page);
|
|||
|
|
outb (0x00, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_one); i += 2) {
|
|||
|
|
outb (page_one[i], dev.fx_dsp_msb);
|
|||
|
|
outb (page_one[i+1], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x02, dev.fx_dsp_page);
|
|||
|
|
outb (0x00, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_two); i++) {
|
|||
|
|
outb (page_two[i], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x03, dev.fx_dsp_page);
|
|||
|
|
outb (0x00, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_three); i++) {
|
|||
|
|
outb (page_three[i], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x04, dev.fx_dsp_page);
|
|||
|
|
outb (0x00, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_four); i++) {
|
|||
|
|
outb (page_four[i], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Load memory area (page six) */
|
|||
|
|
|
|||
|
|
outb (FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x06, dev.fx_dsp_page);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_six); i += 3) {
|
|||
|
|
outb (page_six[i], dev.fx_dsp_addr);
|
|||
|
|
outb (page_six[i+1], dev.fx_dsp_msb);
|
|||
|
|
outb (page_six[i+2], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x00, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_seven); i += 2) {
|
|||
|
|
outb (page_seven[i], dev.fx_dsp_msb);
|
|||
|
|
outb (page_seven[i+1], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Now setup the MOD area. We do this algorithmically in order to
|
|||
|
|
save a little data space. It could be done in the same fashion
|
|||
|
|
as the "pages".
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
for (i = 0x00; i <= 0x0f; i++) {
|
|||
|
|
outb (0x01, dev.fx_mod_addr);
|
|||
|
|
outb (i, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x02, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0xb0; i <= 0xbf; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x20, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0xf0; i <= 0xff; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x20, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0x10; i <= 0x1d; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0xff, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x1e, dev.fx_mod_addr);
|
|||
|
|
outb (0x40, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
for (i = 0x1f; i <= 0x2d; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0xff, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x2e, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
for (i = 0x2f; i <= 0x3e; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x3f, dev.fx_mod_addr);
|
|||
|
|
outb (0x20, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
for (i = 0x40; i <= 0x4d; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x4e, dev.fx_mod_addr);
|
|||
|
|
outb (0x0e, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x4f, dev.fx_mod_addr);
|
|||
|
|
outb (0x0e, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
|
|||
|
|
for (i = 0x50; i <= 0x6b; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x6c, dev.fx_mod_addr);
|
|||
|
|
outb (0x40, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
outb (0x6d, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
outb (0x6e, dev.fx_mod_addr);
|
|||
|
|
outb (0x40, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
outb (0x6f, dev.fx_mod_addr);
|
|||
|
|
outb (0x40, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
for (i = 0x70; i <= 0x7f; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0xc0, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0x80; i <= 0xaf; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0xc0; i <= 0xdd; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0xde, dev.fx_mod_addr);
|
|||
|
|
outb (0x10, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0xdf, dev.fx_mod_addr);
|
|||
|
|
outb (0x10, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
for (i = 0xe0; i <= 0xef; i++) {
|
|||
|
|
outb (i, dev.fx_mod_addr);
|
|||
|
|
outb (0x00, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0x00; i <= 0x0f; i++) {
|
|||
|
|
outb (0x01, dev.fx_mod_addr);
|
|||
|
|
outb (i, dev.fx_mod_data);
|
|||
|
|
outb (0x02, dev.fx_mod_addr);
|
|||
|
|
outb (0x01, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x02, dev.fx_op); /* mute on */
|
|||
|
|
|
|||
|
|
/* Now set the coefficients and so forth for the programs above */
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (coefficients); i += 4) {
|
|||
|
|
outb (coefficients[i], dev.fx_dsp_page);
|
|||
|
|
outb (coefficients[i+1], dev.fx_dsp_addr);
|
|||
|
|
outb (coefficients[i+2], dev.fx_dsp_msb);
|
|||
|
|
outb (coefficients[i+3], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
/* Some settings (?) that are too small to bundle into loops */
|
|||
|
|
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x1e, dev.fx_mod_addr);
|
|||
|
|
outb (0x14, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0xde, dev.fx_mod_addr);
|
|||
|
|
outb (0x20, dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0xdf, dev.fx_mod_addr);
|
|||
|
|
outb (0x20, dev.fx_mod_data);
|
|||
|
|
|
|||
|
|
/* some more coefficients */
|
|||
|
|
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x06, dev.fx_dsp_page);
|
|||
|
|
outb (0x78, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x40, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x03, dev.fx_dsp_addr);
|
|||
|
|
outb (0x0f, dev.fx_dsp_msb);
|
|||
|
|
outb (0xff, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x0b, dev.fx_dsp_addr);
|
|||
|
|
outb (0x0f, dev.fx_dsp_msb);
|
|||
|
|
outb (0xff, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x02, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x0a, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x46, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x49, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
|
|||
|
|
/* Now, for some strange reason, lets reload every page
|
|||
|
|
and all the coefficients over again. I have *NO* idea
|
|||
|
|
why this is done. I do know that no sound is produced
|
|||
|
|
is this phase is omitted.
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x00, dev.fx_dsp_page);
|
|||
|
|
outb (0x10, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_zero_v2); i += 2) {
|
|||
|
|
outb (page_zero_v2[i], dev.fx_dsp_msb);
|
|||
|
|
outb (page_zero_v2[i+1], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x01, dev.fx_dsp_page);
|
|||
|
|
outb (0x10, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_one_v2); i += 2) {
|
|||
|
|
outb (page_one_v2[i], dev.fx_dsp_msb);
|
|||
|
|
outb (page_one_v2[i+1], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x02, dev.fx_dsp_page);
|
|||
|
|
outb (0x10, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_two_v2); i++) {
|
|||
|
|
outb (page_two_v2[i], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x03, dev.fx_dsp_page);
|
|||
|
|
outb (0x10, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_three_v2); i++) {
|
|||
|
|
outb (page_three_v2[i], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x04, dev.fx_dsp_page);
|
|||
|
|
outb (0x10, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_four_v2); i++) {
|
|||
|
|
outb (page_four_v2[i], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x06, dev.fx_dsp_page);
|
|||
|
|
|
|||
|
|
/* Page six v.2 is algorithmic */
|
|||
|
|
|
|||
|
|
for (i = 0x10; i <= 0x3e; i += 2) {
|
|||
|
|
outb (i, dev.fx_dsp_addr);
|
|||
|
|
outb (0x00, dev.fx_dsp_msb);
|
|||
|
|
outb (0x00, dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (FX_AUTO_INCR|FX_LSB_TRANSFER, dev.fx_lcr);
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
outb (0x10, dev.fx_dsp_addr);
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (page_seven_v2); i += 2) {
|
|||
|
|
outb (page_seven_v2[i], dev.fx_dsp_msb);
|
|||
|
|
outb (page_seven_v2[i+1], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0x00; i < sizeof(mod_v2); i += 2) {
|
|||
|
|
outb (mod_v2[i], dev.fx_mod_addr);
|
|||
|
|
outb (mod_v2[i+1], dev.fx_mod_data);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (coefficients2); i += 4) {
|
|||
|
|
outb (coefficients2[i], dev.fx_dsp_page);
|
|||
|
|
outb (coefficients2[i+1], dev.fx_dsp_addr);
|
|||
|
|
outb (coefficients2[i+2], dev.fx_dsp_msb);
|
|||
|
|
outb (coefficients2[i+3], dev.fx_dsp_lsb);
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
for (i = 0; i < sizeof (coefficients3); i += 2) {
|
|||
|
|
int x;
|
|||
|
|
|
|||
|
|
outb (0x07, dev.fx_dsp_page);
|
|||
|
|
x = (i % 4) ? 0x4e : 0x4c;
|
|||
|
|
outb (x, dev.fx_dsp_addr);
|
|||
|
|
outb (coefficients3[i], dev.fx_dsp_msb);
|
|||
|
|
outb (coefficients3[i+1], dev.fx_dsp_lsb);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
outb (0x00, dev.fx_op); /* mute off */
|
|||
|
|
if (!wffx_idle()) return (-1);
|
|||
|
|
|
|||
|
|
return (0);
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static int io = -1;
|
|||
|
|
static int irq = -1;
|
|||
|
|
|
|||
|
|
MODULE_AUTHOR ("Paul Barton-Davis <pbd@op.net>");
|
|||
|
|
MODULE_DESCRIPTION ("Turtle Beach WaveFront Linux Driver");
|
|||
|
|
MODULE_LICENSE("GPL");
|
|||
|
|
module_param (io, int, 0);
|
|||
|
|
module_param (irq, int, 0);
|
|||
|
|
|
|||
|
|
static int __init init_wavfront (void)
|
|||
|
|
{
|
|||
|
|
printk ("Turtle Beach WaveFront Driver\n"
|
|||
|
|
"Copyright (C) by Hannu Solvainen, "
|
|||
|
|
"Paul Barton-Davis 1993-1998.\n");
|
|||
|
|
|
|||
|
|
/* XXX t'would be lovely to ask the CS4232 for these values, eh ? */
|
|||
|
|
|
|||
|
|
if (io == -1 || irq == -1) {
|
|||
|
|
printk (KERN_INFO LOGNAME "irq and io options must be set.\n");
|
|||
|
|
return -EINVAL;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (wavefront_interrupt_bits (irq) < 0) {
|
|||
|
|
printk (KERN_INFO LOGNAME
|
|||
|
|
"IRQ must be 9, 5, 12 or 15 (not %d)\n", irq);
|
|||
|
|
return -ENODEV;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (detect_wavefront (irq, io) < 0) {
|
|||
|
|
return -ENODEV;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
if (install_wavefront () < 0) {
|
|||
|
|
return -EIO;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
return 0;
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
static void __exit cleanup_wavfront (void)
|
|||
|
|
{
|
|||
|
|
uninstall_wavefront ();
|
|||
|
|
}
|
|||
|
|
|
|||
|
|
module_init(init_wavfront);
|
|||
|
|
module_exit(cleanup_wavfront);
|