android_kernel_motorola_sm6225/include/asm-blackfin/mach-bf533/irq.h

176 lines
5.4 KiB
C
Raw Normal View History

blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
/*
* File: include/asm-blackfin/mach-bf533/defBF532.h
* Based on:
* Author:
*
* Created:
* Description:
*
* Rev:
*
* Modified:
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING.
* If not, write to the Free Software Foundation,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef _BF533_IRQ_H_
#define _BF533_IRQ_H_
/*
* Interrupt source definitions
Event Source Core Event Name
Core Emulation **
Events (highest priority) EMU 0
Reset RST 1
NMI NMI 2
Exception EVX 3
Reserved -- 4
Hardware Error IVHW 5
Core Timer IVTMR 6 *
PLL Wakeup Interrupt IVG7 7
DMA Error (generic) IVG7 8
PPI Error Interrupt IVG7 9
SPORT0 Error Interrupt IVG7 10
SPORT1 Error Interrupt IVG7 11
SPI Error Interrupt IVG7 12
UART Error Interrupt IVG7 13
RTC Interrupt IVG8 14
DMA0 Interrupt (PPI) IVG8 15
DMA1 (SPORT0 RX) IVG9 16
DMA2 (SPORT0 TX) IVG9 17
DMA3 (SPORT1 RX) IVG9 18
DMA4 (SPORT1 TX) IVG9 19
DMA5 (PPI) IVG10 20
DMA6 (UART RX) IVG10 21
DMA7 (UART TX) IVG10 22
Timer0 IVG11 23
Timer1 IVG11 24
Timer2 IVG11 25
PF Interrupt A IVG12 26
PF Interrupt B IVG12 27
DMA8/9 Interrupt IVG13 28
DMA10/11 Interrupt IVG13 29
Watchdog Timer IVG13 30
Software Interrupt 1 IVG14 31
Software Interrupt 2 --
(lowest priority) IVG15 32 *
*/
#define SYS_IRQS 32
#define NR_PERI_INTS 24
/* The ABSTRACT IRQ definitions */
/** the first seven of the following are fixed, the rest you change if you need to **/
#define IRQ_EMU 0 /*Emulation */
#define IRQ_RST 1 /*reset */
#define IRQ_NMI 2 /*Non Maskable */
#define IRQ_EVX 3 /*Exception */
#define IRQ_UNUSED 4 /*- unused interrupt*/
#define IRQ_HWERR 5 /*Hardware Error */
#define IRQ_CORETMR 6 /*Core timer */
#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */
#define IRQ_DMA_ERROR 8 /*DMA Error (general) */
#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */
#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */
#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */
#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */
#define IRQ_UART_ERROR 13 /*UART Error Interrupt */
#define IRQ_RTC 14 /*RTC Interrupt */
#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */
#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */
#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */
#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */
#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */
#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */
#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */
#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */
#define IRQ_TMR0 23 /*Timer 0 */
#define IRQ_TMR1 24 /*Timer 1 */
#define IRQ_TMR2 25 /*Timer 2 */
#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */
#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */
#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */
#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */
#define IRQ_WATCH 30 /*Watch Dog Timer */
#define IRQ_SW_INT1 31 /*Software Int 1 */
#define IRQ_SW_INT2 32 /*Software Int 2 (reserved for SYSCALL) */
#define IRQ_PF0 33
#define IRQ_PF1 34
#define IRQ_PF2 35
#define IRQ_PF3 36
#define IRQ_PF4 37
#define IRQ_PF5 38
#define IRQ_PF6 39
#define IRQ_PF7 40
#define IRQ_PF8 41
#define IRQ_PF9 42
#define IRQ_PF10 43
#define IRQ_PF11 44
#define IRQ_PF12 45
#define IRQ_PF13 46
#define IRQ_PF14 47
#define IRQ_PF15 48
#define GPIO_IRQ_BASE IRQ_PF0
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
#define NR_IRQS (IRQ_PF15+1)
#define IVG7 7
#define IVG8 8
#define IVG9 9
#define IVG10 10
#define IVG11 11
#define IVG12 12
#define IVG13 13
#define IVG14 14
#define IVG15 15
/* IAR0 BIT FIELDS*/
#define RTC_ERROR_POS 28
#define UART_ERROR_POS 24
#define SPORT1_ERROR_POS 20
#define SPI_ERROR_POS 16
#define SPORT0_ERROR_POS 12
#define PPI_ERROR_POS 8
#define DMA_ERROR_POS 4
#define PLLWAKE_ERROR_POS 0
/* IAR1 BIT FIELDS*/
#define DMA7_UARTTX_POS 28
#define DMA6_UARTRX_POS 24
#define DMA5_SPI_POS 20
#define DMA4_SPORT1TX_POS 16
#define DMA3_SPORT1RX_POS 12
#define DMA2_SPORT0TX_POS 8
#define DMA1_SPORT0RX_POS 4
#define DMA0_PPI_POS 0
/* IAR2 BIT FIELDS*/
#define WDTIMER_POS 28
#define MEMDMA1_POS 24
#define MEMDMA0_POS 20
#define PFB_POS 16
#define PFA_POS 12
#define TIMER2_POS 8
#define TIMER1_POS 4
#define TIMER0_POS 0
#endif /* _BF533_IRQ_H_ */