android_kernel_motorola_sm6225/arch/x86/kernel/time_64.c

140 lines
3.4 KiB
C
Raw Normal View History

/*
* "High Precision Event Timer" based timekeeping.
*
* Copyright (c) 1991,1992,1995 Linus Torvalds
* Copyright (c) 1994 Alan Modra
* Copyright (c) 1995 Markus Kuhn
* Copyright (c) 1996 Ingo Molnar
* Copyright (c) 1998 Andrea Arcangeli
* Copyright (c) 2002,2006 Vojtech Pavlik
* Copyright (c) 2003 Andi Kleen
* RTC support code taken from arch/i386/kernel/timers/time_hpet.c
*/
#include <linux/clockchips.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/time.h>
#include <asm/i8253.h>
#include <asm/hpet.h>
#include <asm/nmi.h>
#include <asm/vgtod.h>
#include <asm/time.h>
#include <asm/timer.h>
volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
unsigned long profile_pc(struct pt_regs *regs)
{
unsigned long pc = instruction_pointer(regs);
/* Assume the lock function has either no stack frame or a copy
of flags from PUSHF
Eflags always has bits 22 and up cleared unlike kernel addresses. */
if (!user_mode(regs) && in_lock_functions(pc)) {
unsigned long *sp = (unsigned long *)regs->sp;
if (sp[0] >> 22)
return sp[0];
if (sp[1] >> 22)
return sp[1];
}
return pc;
}
EXPORT_SYMBOL(profile_pc);
static irqreturn_t timer_event_interrupt(int irq, void *dev_id)
{
add_pda(irq0_irqs, 1);
global_clock_event->event_handler(global_clock_event);
return IRQ_HANDLED;
}
/* calibrate_cpu is used on systems with fixed rate TSCs to determine
* processor frequency */
#define TICK_COUNT 100000000
unsigned long __init native_calculate_cpu_khz(void)
{
int tsc_start, tsc_now;
int i, no_ctr_free;
unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
unsigned long flags;
for (i = 0; i < 4; i++)
if (avail_to_resrv_perfctr_nmi_bit(i))
break;
no_ctr_free = (i == 4);
if (no_ctr_free) {
i = 3;
rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
wrmsrl(MSR_K7_EVNTSEL3, 0);
rdmsrl(MSR_K7_PERFCTR3, pmc3);
} else {
reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
local_irq_save(flags);
/* start meauring cycles, incrementing from 0 */
wrmsrl(MSR_K7_PERFCTR0 + i, 0);
wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
rdtscl(tsc_start);
do {
rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
tsc_now = get_cycles_sync();
} while ((tsc_now - tsc_start) < TICK_COUNT);
local_irq_restore(flags);
if (no_ctr_free) {
wrmsrl(MSR_K7_EVNTSEL3, 0);
wrmsrl(MSR_K7_PERFCTR3, pmc3);
wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
} else {
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
return pmc_now * tsc_khz / (tsc_now - tsc_start);
}
static struct irqaction irq0 = {
.handler = timer_event_interrupt,
.flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
.mask = CPU_MASK_NONE,
.name = "timer"
};
void __init hpet_time_init(void)
{
if (!hpet_enable())
setup_pit_timer();
setup_irq(0, &irq0);
}
void __init time_init(void)
{
tsc_calibrate();
cpu_khz = tsc_khz;
if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 == 16)
cpu_khz = calculate_cpu_khz();
if (unsynchronized_tsc())
mark_tsc_unstable("TSCs unsynchronized");
if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
vgetcpu_mode = VGETCPU_RDTSCP;
else
vgetcpu_mode = VGETCPU_LSL;
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
[PATCH] clocksource init adjustments (fix bug #7426) This patch resolves the issue found here: http://bugme.osdl.org/show_bug.cgi?id=7426 The basic summary is: Currently we register most of i386/x86_64 clocksources at module_init time. Then we enable clocksource selection at late_initcall time. This causes some problems for drivers that use gettimeofday for init calibration routines (specifically the es1968 driver in this case), where durring module_init, the only clocksource available is the low-res jiffies clocksource. This may cause slight calibration errors, due to the small sampling time used. It should be noted that drivers that require fine grained time may not function on architectures that do not have better then jiffies resolution timekeeping (there are a few). However, this does not discount the reasonable need for such fine-grained timekeeping at init time. Thus the solution here is to register clocksources earlier (ideally when the hardware is being initialized), and then we enable clocksource selection at fs_initcall (before device_initcall). This patch should probably get some testing time in -mm, since clocksource selection is one of the most important issues for correct timekeeping, and I've only been able to test this on a few of my own boxes. Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 09:30:50 +01:00
init_tsc_clocksource();
late_time_init = choose_time_init();
}