android_kernel_motorola_sm6225/drivers/bluetooth/btuart_cs.c

765 lines
16 KiB
C
Raw Normal View History

/*
*
* Driver for Bluetooth PCMCIA cards with HCI UART interface
*
* Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The initial developer of the original code is David A. Hinds
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
#include <linux/string.h>
#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/io.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
/* ======================== Module parameters ======================== */
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface");
MODULE_LICENSE("GPL");
/* ======================== Local structures ======================== */
typedef struct btuart_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct hci_dev *hdev;
spinlock_t lock; /* For serializing operations */
struct sk_buff_head txq;
unsigned long tx_state;
unsigned long rx_state;
unsigned long rx_count;
struct sk_buff *rx_skb;
} btuart_info_t;
static int btuart_config(struct pcmcia_device *link);
static void btuart_release(struct pcmcia_device *link);
static void btuart_detach(struct pcmcia_device *p_dev);
/* Maximum baud rate */
#define SPEED_MAX 115200
/* Default baud rate: 57600, 115200, 230400 or 460800 */
#define DEFAULT_BAUD_RATE 115200
/* Transmit states */
#define XMIT_SENDING 1
#define XMIT_WAKEUP 2
#define XMIT_WAITING 8
/* Receiver states */
#define RECV_WAIT_PACKET_TYPE 0
#define RECV_WAIT_EVENT_HEADER 1
#define RECV_WAIT_ACL_HEADER 2
#define RECV_WAIT_SCO_HEADER 3
#define RECV_WAIT_DATA 4
/* ======================== Interrupt handling ======================== */
static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
{
int actual = 0;
/* Tx FIFO should be empty */
if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
return 0;
/* Fill FIFO with current frame */
while ((fifo_size-- > 0) && (actual < len)) {
/* Transmit next byte */
outb(buf[actual], iobase + UART_TX);
actual++;
}
return actual;
}
static void btuart_write_wakeup(btuart_info_t *info)
{
if (!info) {
BT_ERR("Unknown device");
return;
}
if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
set_bit(XMIT_WAKEUP, &(info->tx_state));
return;
}
do {
register unsigned int iobase = info->p_dev->io.BasePort1;
register struct sk_buff *skb;
register int len;
clear_bit(XMIT_WAKEUP, &(info->tx_state));
if (!pcmcia_dev_present(info->p_dev))
return;
if (!(skb = skb_dequeue(&(info->txq))))
break;
/* Send frame */
len = btuart_write(iobase, 16, skb->data, skb->len);
set_bit(XMIT_WAKEUP, &(info->tx_state));
if (len == skb->len) {
kfree_skb(skb);
} else {
skb_pull(skb, len);
skb_queue_head(&(info->txq), skb);
}
info->hdev->stat.byte_tx += len;
} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
clear_bit(XMIT_SENDING, &(info->tx_state));
}
static void btuart_receive(btuart_info_t *info)
{
unsigned int iobase;
int boguscount = 0;
if (!info) {
BT_ERR("Unknown device");
return;
}
iobase = info->p_dev->io.BasePort1;
do {
info->hdev->stat.byte_rx++;
/* Allocate packet */
if (info->rx_skb == NULL) {
info->rx_state = RECV_WAIT_PACKET_TYPE;
info->rx_count = 0;
if (!(info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC))) {
BT_ERR("Can't allocate mem for new packet");
return;
}
}
if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
info->rx_skb->dev = (void *) info->hdev;
bt_cb(info->rx_skb)->pkt_type = inb(iobase + UART_RX);
switch (bt_cb(info->rx_skb)->pkt_type) {
case HCI_EVENT_PKT:
info->rx_state = RECV_WAIT_EVENT_HEADER;
info->rx_count = HCI_EVENT_HDR_SIZE;
break;
case HCI_ACLDATA_PKT:
info->rx_state = RECV_WAIT_ACL_HEADER;
info->rx_count = HCI_ACL_HDR_SIZE;
break;
case HCI_SCODATA_PKT:
info->rx_state = RECV_WAIT_SCO_HEADER;
info->rx_count = HCI_SCO_HDR_SIZE;
break;
default:
/* Unknown packet */
BT_ERR("Unknown HCI packet with type 0x%02x received", bt_cb(info->rx_skb)->pkt_type);
info->hdev->stat.err_rx++;
clear_bit(HCI_RUNNING, &(info->hdev->flags));
kfree_skb(info->rx_skb);
info->rx_skb = NULL;
break;
}
} else {
*skb_put(info->rx_skb, 1) = inb(iobase + UART_RX);
info->rx_count--;
if (info->rx_count == 0) {
int dlen;
struct hci_event_hdr *eh;
struct hci_acl_hdr *ah;
struct hci_sco_hdr *sh;
switch (info->rx_state) {
case RECV_WAIT_EVENT_HEADER:
eh = (struct hci_event_hdr *)(info->rx_skb->data);
info->rx_state = RECV_WAIT_DATA;
info->rx_count = eh->plen;
break;
case RECV_WAIT_ACL_HEADER:
ah = (struct hci_acl_hdr *)(info->rx_skb->data);
dlen = __le16_to_cpu(ah->dlen);
info->rx_state = RECV_WAIT_DATA;
info->rx_count = dlen;
break;
case RECV_WAIT_SCO_HEADER:
sh = (struct hci_sco_hdr *)(info->rx_skb->data);
info->rx_state = RECV_WAIT_DATA;
info->rx_count = sh->dlen;
break;
case RECV_WAIT_DATA:
hci_recv_frame(info->rx_skb);
info->rx_skb = NULL;
break;
}
}
}
/* Make sure we don't stay here too long */
if (boguscount++ > 16)
break;
} while (inb(iobase + UART_LSR) & UART_LSR_DR);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:55:46 +02:00
static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
{
btuart_info_t *info = dev_inst;
unsigned int iobase;
int boguscount = 0;
int iir, lsr;
if (!info || !info->hdev) {
BT_ERR("Call of irq %d for unknown device", irq);
return IRQ_NONE;
}
iobase = info->p_dev->io.BasePort1;
spin_lock(&(info->lock));
iir = inb(iobase + UART_IIR) & UART_IIR_ID;
while (iir) {
/* Clear interrupt */
lsr = inb(iobase + UART_LSR);
switch (iir) {
case UART_IIR_RLSI:
BT_ERR("RLSI");
break;
case UART_IIR_RDI:
/* Receive interrupt */
btuart_receive(info);
break;
case UART_IIR_THRI:
if (lsr & UART_LSR_THRE) {
/* Transmitter ready for data */
btuart_write_wakeup(info);
}
break;
default:
BT_ERR("Unhandled IIR=%#x", iir);
break;
}
/* Make sure we don't stay here too long */
if (boguscount++ > 100)
break;
iir = inb(iobase + UART_IIR) & UART_IIR_ID;
}
spin_unlock(&(info->lock));
return IRQ_HANDLED;
}
static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
{
unsigned long flags;
unsigned int iobase;
int fcr; /* FIFO control reg */
int lcr; /* Line control reg */
int divisor;
if (!info) {
BT_ERR("Unknown device");
return;
}
iobase = info->p_dev->io.BasePort1;
spin_lock_irqsave(&(info->lock), flags);
/* Turn off interrupts */
outb(0, iobase + UART_IER);
divisor = SPEED_MAX / speed;
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
/*
* Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and
* almost 1,7 ms at 19200 bps. At speeds above that we can just forget
* about this timeout since it will always be fast enough.
*/
if (speed < 38400)
fcr |= UART_FCR_TRIGGER_1;
else
fcr |= UART_FCR_TRIGGER_14;
/* Bluetooth cards use 8N1 */
lcr = UART_LCR_WLEN8;
outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */
outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */
outb(divisor >> 8, iobase + UART_DLM);
outb(lcr, iobase + UART_LCR); /* Set 8N1 */
outb(fcr, iobase + UART_FCR); /* Enable FIFO's */
/* Turn on interrups */
outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
spin_unlock_irqrestore(&(info->lock), flags);
}
/* ======================== HCI interface ======================== */
static int btuart_hci_flush(struct hci_dev *hdev)
{
btuart_info_t *info = (btuart_info_t *)(hdev->driver_data);
/* Drop TX queue */
skb_queue_purge(&(info->txq));
return 0;
}
static int btuart_hci_open(struct hci_dev *hdev)
{
set_bit(HCI_RUNNING, &(hdev->flags));
return 0;
}
static int btuart_hci_close(struct hci_dev *hdev)
{
if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
return 0;
btuart_hci_flush(hdev);
return 0;
}
static int btuart_hci_send_frame(struct sk_buff *skb)
{
btuart_info_t *info;
struct hci_dev *hdev = (struct hci_dev *)(skb->dev);
if (!hdev) {
BT_ERR("Frame for unknown HCI device (hdev=NULL)");
return -ENODEV;
}
info = (btuart_info_t *)(hdev->driver_data);
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
hdev->stat.acl_tx++;
break;
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
};
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
skb_queue_tail(&(info->txq), skb);
btuart_write_wakeup(info);
return 0;
}
static void btuart_hci_destruct(struct hci_dev *hdev)
{
}
static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* ======================== Card services HCI interaction ======================== */
static int btuart_open(btuart_info_t *info)
{
unsigned long flags;
unsigned int iobase = info->p_dev->io.BasePort1;
struct hci_dev *hdev;
spin_lock_init(&(info->lock));
skb_queue_head_init(&(info->txq));
info->rx_state = RECV_WAIT_PACKET_TYPE;
info->rx_count = 0;
info->rx_skb = NULL;
/* Initialize HCI device */
hdev = hci_alloc_dev();
if (!hdev) {
BT_ERR("Can't allocate HCI device");
return -ENOMEM;
}
info->hdev = hdev;
hdev->type = HCI_PCCARD;
hdev->driver_data = info;
SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
hdev->open = btuart_hci_open;
hdev->close = btuart_hci_close;
hdev->flush = btuart_hci_flush;
hdev->send = btuart_hci_send_frame;
hdev->destruct = btuart_hci_destruct;
hdev->ioctl = btuart_hci_ioctl;
hdev->owner = THIS_MODULE;
spin_lock_irqsave(&(info->lock), flags);
/* Reset UART */
outb(0, iobase + UART_MCR);
/* Turn off interrupts */
outb(0, iobase + UART_IER);
/* Initialize UART */
outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
/* Turn on interrupts */
// outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
spin_unlock_irqrestore(&(info->lock), flags);
btuart_change_speed(info, DEFAULT_BAUD_RATE);
/* Timeout before it is safe to send the first HCI packet */
msleep(1000);
/* Register HCI device */
if (hci_register_dev(hdev) < 0) {
BT_ERR("Can't register HCI device");
info->hdev = NULL;
hci_free_dev(hdev);
return -ENODEV;
}
return 0;
}
static int btuart_close(btuart_info_t *info)
{
unsigned long flags;
unsigned int iobase = info->p_dev->io.BasePort1;
struct hci_dev *hdev = info->hdev;
if (!hdev)
return -ENODEV;
btuart_hci_close(hdev);
spin_lock_irqsave(&(info->lock), flags);
/* Reset UART */
outb(0, iobase + UART_MCR);
/* Turn off interrupts */
outb(0, iobase + UART_IER);
spin_unlock_irqrestore(&(info->lock), flags);
if (hci_unregister_dev(hdev) < 0)
BT_ERR("Can't unregister HCI device %s", hdev->name);
hci_free_dev(hdev);
return 0;
}
static int btuart_probe(struct pcmcia_device *link)
{
btuart_info_t *info;
/* Create new info device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->p_dev = link;
link->priv = info;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 8;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = btuart_interrupt;
link->irq.Instance = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
return btuart_config(link);
}
static void btuart_detach(struct pcmcia_device *link)
{
btuart_info_t *info = link->priv;
btuart_release(link);
kfree(info);
}
static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
{
int i;
i = pcmcia_get_tuple_data(handle, tuple);
if (i != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
{
if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
return CS_NO_MORE_ITEMS;
return get_tuple(handle, tuple, parse);
}
static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
{
if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
return CS_NO_MORE_ITEMS;
return get_tuple(handle, tuple, parse);
}
static int btuart_config(struct pcmcia_device *link)
{
static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i, j, try;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(link, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(link, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(link, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
&& ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
BT_ERR("No usable port range found");
cs_error(link, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
if (btuart_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:
btuart_release(link);
return -ENODEV;
}
static void btuart_release(struct pcmcia_device *link)
{
btuart_info_t *info = link->priv;
btuart_close(info);
pcmcia_disable_device(link);
}
static struct pcmcia_device_id btuart_ids[] = {
/* don't use this driver. Use serial_cs + hci_uart instead */
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, btuart_ids);
static struct pcmcia_driver btuart_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "btuart_cs",
},
.probe = btuart_probe,
.remove = btuart_detach,
.id_table = btuart_ids,
};
static int __init init_btuart_cs(void)
{
return pcmcia_register_driver(&btuart_driver);
}
static void __exit exit_btuart_cs(void)
{
pcmcia_unregister_driver(&btuart_driver);
}
module_init(init_btuart_cs);
module_exit(exit_btuart_cs);