android_kernel_motorola_sm6225/arch/um/include/kern_util.h

121 lines
4.2 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#ifndef __KERN_UTIL_H__
#define __KERN_UTIL_H__
#include "sysdep/ptrace.h"
[PATCH] uml: S390 preparation, abstract host page fault data This patch removes the arch-specific fault/trap-infos from thread and skas-regs. It adds a new struct faultinfo, that is arch-specific defined in sysdep/faultinfo.h. The structure is inserted in thread.arch and thread.regs.skas and thread.regs.tt Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo to thread.arch.faultinfo with one simple assignment. Also, the number of macros necessary is reduced to FAULT_ADDRESS(struct faultinfo) extracts the faulting address from faultinfo FAULT_WRITE(struct faultinfo) extracts the "is_write" flag SEGV_IS_FIXABLE(struct faultinfo) is true for the fixable segvs, i.e. (TRAP == 14) on i386 UPT_FAULTINFO(regs) result is (struct faultinfo *) to the faultinfo in regs->skas.faultinfo GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *) copies the relevant parts of the sigcontext to struct faultinfo. On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is missing, because segv-stub will provide the info. The benefit of the change is, that in case of a non-fixable SIGSEGV, we can give user processes a SIGSEGV, instead of possibly looping on pagefault handling. Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(), I changed segv() to call arch_fixup() only, if !is_user. Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06 01:15:31 +02:00
#include "sysdep/faultinfo.h"
typedef void (*kern_hndl)(int, union uml_pt_regs *);
struct kern_handlers {
kern_hndl relay_signal;
kern_hndl winch;
kern_hndl bus_handler;
kern_hndl page_fault;
kern_hndl sigio_handler;
kern_hndl timer_handler;
};
extern const struct kern_handlers handlinfo_kern;
extern int ncpus;
extern char *gdb_init;
extern int kmalloc_ok;
extern int jail;
extern int nsyscalls;
#define UML_ROUND_DOWN(addr) ((void *)(((unsigned long) addr) & PAGE_MASK))
#define UML_ROUND_UP(addr) \
UML_ROUND_DOWN(((unsigned long) addr) + PAGE_SIZE - 1)
extern int kernel_fork(unsigned long flags, int (*fn)(void *), void * arg);
extern unsigned long stack_sp(unsigned long page);
extern int kernel_thread_proc(void *data);
extern void syscall_segv(int sig);
extern int current_pid(void);
extern unsigned long alloc_stack(int order, int atomic);
extern int do_signal(void);
extern int is_stack_fault(unsigned long sp);
[PATCH] uml: S390 preparation, abstract host page fault data This patch removes the arch-specific fault/trap-infos from thread and skas-regs. It adds a new struct faultinfo, that is arch-specific defined in sysdep/faultinfo.h. The structure is inserted in thread.arch and thread.regs.skas and thread.regs.tt Now, segv and other trap-handlers can copy the contents from regs.X.faultinfo to thread.arch.faultinfo with one simple assignment. Also, the number of macros necessary is reduced to FAULT_ADDRESS(struct faultinfo) extracts the faulting address from faultinfo FAULT_WRITE(struct faultinfo) extracts the "is_write" flag SEGV_IS_FIXABLE(struct faultinfo) is true for the fixable segvs, i.e. (TRAP == 14) on i386 UPT_FAULTINFO(regs) result is (struct faultinfo *) to the faultinfo in regs->skas.faultinfo GET_FAULTINFO_FROM_SC(struct faultinfo, struct sigcontext *) copies the relevant parts of the sigcontext to struct faultinfo. On SIGSEGV, call user_signal() instead of handle_segv(), if the architecture provides the information needed in PTRACE_FAULTINFO, or if PTRACE_FAULTINFO is missing, because segv-stub will provide the info. The benefit of the change is, that in case of a non-fixable SIGSEGV, we can give user processes a SIGSEGV, instead of possibly looping on pagefault handling. Since handle_segv() sikked arch_fixup() implicitly by passing ip==0 to segv(), I changed segv() to call arch_fixup() only, if !is_user. Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06 01:15:31 +02:00
extern unsigned long segv(struct faultinfo fi, unsigned long ip,
int is_user, void *sc);
extern int handle_page_fault(unsigned long address, unsigned long ip,
int is_write, int is_user, int *code_out);
extern void syscall_ready(void);
extern void set_tracing(void *t, int tracing);
extern int is_tracing(void *task);
extern int segv_syscall(void);
extern void kern_finish_exec(void *task, int new_pid, unsigned long stack);
extern int page_size(void);
extern unsigned long page_mask(void);
extern int need_finish_fork(void);
extern void free_stack(unsigned long stack, int order);
extern void add_input_request(int op, void (*proc)(int), void *arg);
extern char *current_cmd(void);
extern void timer_handler(int sig, union uml_pt_regs *regs);
extern int set_signals(int enable);
extern void force_sigbus(void);
extern int pid_to_processor_id(int pid);
extern void deliver_signals(void *t);
extern int next_trap_index(int max);
extern void default_idle(void);
extern void finish_fork(void);
extern void paging_init(void);
extern void init_flush_vm(void);
extern void *syscall_sp(void *t);
extern void syscall_trace(union uml_pt_regs *regs, int entryexit);
extern int hz(void);
extern unsigned int do_IRQ(int irq, union uml_pt_regs *regs);
extern int external_pid(void *t);
extern void interrupt_end(void);
extern void initial_thread_cb(void (*proc)(void *), void *arg);
extern int debugger_signal(int status, int pid);
extern void debugger_parent_signal(int status, int pid);
extern void child_signal(int pid, int status);
extern int init_ptrace_proxy(int idle_pid, int startup, int stop);
extern int init_parent_proxy(int pid);
extern int singlestepping(void *t);
extern void check_stack_overflow(void *ptr);
extern void relay_signal(int sig, union uml_pt_regs *regs);
extern void not_implemented(void);
extern int user_context(unsigned long sp);
extern void timer_irq(union uml_pt_regs *regs);
extern void unprotect_stack(unsigned long stack);
extern void do_uml_exitcalls(void);
extern int attach_debugger(int idle_pid, int pid, int stop);
extern int config_gdb(char *str);
extern int remove_gdb(void);
extern char *uml_strdup(char *string);
extern void unprotect_kernel_mem(void);
extern void protect_kernel_mem(void);
extern void uml_cleanup(void);
extern void set_current(void *t);
extern void lock_signalled_task(void *t);
extern void IPI_handler(int cpu);
extern int jail_setup(char *line, int *add);
extern void *get_init_task(void);
extern int clear_user_proc(void *buf, int size);
extern int copy_to_user_proc(void *to, void *from, int size);
extern int copy_from_user_proc(void *to, void *from, int size);
extern int strlen_user_proc(char *str);
extern long execute_syscall(void *r);
extern int smp_sigio_handler(void);
extern void *get_current(void);
extern struct task_struct *get_task(int pid, int require);
extern void machine_halt(void);
extern int is_syscall(unsigned long addr);
[PATCH] uml: clean arch_switch usage Call arch_switch also in switch_to_skas, even if it's, for now, a no-op for that case (and mark this in the comment); this will change soon. Also, arch_switch for TT mode is actually useless when the PT proxy (a complicate debugging instrumentation for TT mode) is not enabled. In fact, it only calls update_debugregs, which checks debugregs_seq against seq (to check if the registers are up-to-date - seq here means a "version number" of the registers). If the ptrace proxy is not enabled, debugregs_seq always stays 0 and update_debugregs will be a no-op. So, optimize this out (the compiler can't do it). Also, I've been disappointed by the fact that it would make a lot of sense if, after calling a successful update_debugregs(current->thread.arch.debugregs_seq), current->thread.arch.debugregs_seq were updated with the new debugregs_seq. But this is not done. Is this a bug or a feature? For all purposes, it seems a bug (otherwise the whole mechanism does not make sense, which is also a possibility to check), which causes some performance only problems (not correctness), since we write_debugregs when not needed. Also, as suggested by Jeff, remove a redundant enabling of SIGVTALRM, comprised in the subsequent local_irq_enable(). I'm just a bit dubious if ordering matters there... Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:30:21 +02:00
extern void free_irq(unsigned int, void *);
extern int cpu(void);
extern void time_init_kern(void);
/* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */
extern int __cant_sleep(void);
extern void sigio_handler(int sig, union uml_pt_regs *regs);
#endif