2007-07-12 03:51:31 +02:00
|
|
|
/* ds.c: Domain Services driver for Logical Domains
|
|
|
|
*
|
|
|
|
* Copyright (C) 2007 David S. Miller <davem@davemloft.net>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/delay.h>
|
2007-07-13 00:55:55 +02:00
|
|
|
#include <linux/mutex.h>
|
2007-07-14 12:14:45 +02:00
|
|
|
#include <linux/kthread.h>
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
#include <linux/cpu.h>
|
2007-07-12 03:51:31 +02:00
|
|
|
|
|
|
|
#include <asm/ldc.h>
|
|
|
|
#include <asm/vio.h>
|
|
|
|
#include <asm/power.h>
|
2007-07-12 22:47:50 +02:00
|
|
|
#include <asm/mdesc.h>
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
#include <asm/head.h>
|
2007-07-16 12:49:40 +02:00
|
|
|
#include <asm/irq.h>
|
2007-07-12 03:51:31 +02:00
|
|
|
|
|
|
|
#define DRV_MODULE_NAME "ds"
|
|
|
|
#define PFX DRV_MODULE_NAME ": "
|
|
|
|
#define DRV_MODULE_VERSION "1.0"
|
|
|
|
#define DRV_MODULE_RELDATE "Jul 11, 2007"
|
|
|
|
|
|
|
|
static char version[] __devinitdata =
|
|
|
|
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
|
|
|
|
MODULE_DESCRIPTION("Sun LDOM domain services driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_VERSION(DRV_MODULE_VERSION);
|
|
|
|
|
|
|
|
struct ds_msg_tag {
|
|
|
|
__u32 type;
|
|
|
|
#define DS_INIT_REQ 0x00
|
|
|
|
#define DS_INIT_ACK 0x01
|
|
|
|
#define DS_INIT_NACK 0x02
|
|
|
|
#define DS_REG_REQ 0x03
|
|
|
|
#define DS_REG_ACK 0x04
|
|
|
|
#define DS_REG_NACK 0x05
|
|
|
|
#define DS_UNREG_REQ 0x06
|
|
|
|
#define DS_UNREG_ACK 0x07
|
|
|
|
#define DS_UNREG_NACK 0x08
|
|
|
|
#define DS_DATA 0x09
|
|
|
|
#define DS_NACK 0x0a
|
|
|
|
|
|
|
|
__u32 len;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Result codes */
|
|
|
|
#define DS_OK 0x00
|
|
|
|
#define DS_REG_VER_NACK 0x01
|
|
|
|
#define DS_REG_DUP 0x02
|
|
|
|
#define DS_INV_HDL 0x03
|
|
|
|
#define DS_TYPE_UNKNOWN 0x04
|
|
|
|
|
|
|
|
struct ds_version {
|
|
|
|
__u16 major;
|
|
|
|
__u16 minor;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_ver_req {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
struct ds_version ver;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_ver_ack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u16 minor;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_ver_nack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u16 major;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_reg_req {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
__u16 major;
|
|
|
|
__u16 minor;
|
|
|
|
char svc_id[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_reg_ack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
__u16 minor;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_reg_nack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
__u16 major;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_unreg_req {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_unreg_ack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_unreg_nack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_data {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_data_nack {
|
|
|
|
struct ds_msg_tag tag;
|
|
|
|
__u64 handle;
|
|
|
|
__u64 result;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_cap_state {
|
|
|
|
__u64 handle;
|
|
|
|
|
|
|
|
void (*data)(struct ldc_channel *lp,
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
struct ds_cap_state *cp,
|
2007-07-12 03:51:31 +02:00
|
|
|
void *buf, int len);
|
|
|
|
|
|
|
|
const char *service_id;
|
|
|
|
|
|
|
|
u8 state;
|
|
|
|
#define CAP_STATE_UNKNOWN 0x00
|
|
|
|
#define CAP_STATE_REG_SENT 0x01
|
|
|
|
#define CAP_STATE_REGISTERED 0x02
|
|
|
|
};
|
|
|
|
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
static void md_update_data(struct ldc_channel *lp, struct ds_cap_state *cp,
|
|
|
|
void *buf, int len);
|
|
|
|
static void domain_shutdown_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *cp,
|
|
|
|
void *buf, int len);
|
|
|
|
static void domain_panic_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *cp,
|
|
|
|
void *buf, int len);
|
2007-07-14 09:45:16 +02:00
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
static void dr_cpu_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *cp,
|
|
|
|
void *buf, int len);
|
2007-07-14 09:45:16 +02:00
|
|
|
#endif
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
static void ds_pri_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *cp,
|
|
|
|
void *buf, int len);
|
|
|
|
static void ds_var_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *cp,
|
|
|
|
void *buf, int len);
|
|
|
|
|
|
|
|
struct ds_cap_state ds_states[] = {
|
|
|
|
{
|
|
|
|
.service_id = "md-update",
|
|
|
|
.data = md_update_data,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.service_id = "domain-shutdown",
|
|
|
|
.data = domain_shutdown_data,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.service_id = "domain-panic",
|
|
|
|
.data = domain_panic_data,
|
|
|
|
},
|
2007-07-14 09:45:16 +02:00
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
{
|
|
|
|
.service_id = "dr-cpu",
|
|
|
|
.data = dr_cpu_data,
|
|
|
|
},
|
2007-07-14 09:45:16 +02:00
|
|
|
#endif
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
{
|
|
|
|
.service_id = "pri",
|
|
|
|
.data = ds_pri_data,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.service_id = "var-config",
|
|
|
|
.data = ds_var_data,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.service_id = "var-config-backup",
|
|
|
|
.data = ds_var_data,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static DEFINE_SPINLOCK(ds_lock);
|
|
|
|
|
|
|
|
struct ds_info {
|
|
|
|
struct ldc_channel *lp;
|
|
|
|
u8 hs_state;
|
|
|
|
#define DS_HS_START 0x01
|
|
|
|
#define DS_HS_DONE 0x02
|
|
|
|
|
|
|
|
void *rcv_buf;
|
|
|
|
int rcv_buf_len;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct ds_info *ds_info;
|
|
|
|
|
|
|
|
static struct ds_cap_state *find_cap(u64 handle)
|
|
|
|
{
|
|
|
|
unsigned int index = handle >> 32;
|
|
|
|
|
|
|
|
if (index >= ARRAY_SIZE(ds_states))
|
|
|
|
return NULL;
|
|
|
|
return &ds_states[index];
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct ds_cap_state *find_cap_by_string(const char *name)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ds_states); i++) {
|
|
|
|
if (strcmp(ds_states[i].service_id, name))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
return &ds_states[i];
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
static int __ds_send(struct ldc_channel *lp, void *data, int len)
|
2007-07-12 03:51:31 +02:00
|
|
|
{
|
|
|
|
int err, limit = 1000;
|
|
|
|
|
|
|
|
err = -EINVAL;
|
|
|
|
while (limit-- > 0) {
|
|
|
|
err = ldc_write(lp, data, len);
|
|
|
|
if (!err || (err != -EAGAIN))
|
|
|
|
break;
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
static int ds_send(struct ldc_channel *lp, void *data, int len)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
|
|
|
err = __ds_send(lp, data, len);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
struct ds_md_update_req {
|
|
|
|
__u64 req_num;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_md_update_res {
|
|
|
|
__u64 req_num;
|
|
|
|
__u32 result;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void md_update_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *dp,
|
|
|
|
void *buf, int len)
|
|
|
|
{
|
|
|
|
struct ds_data *dpkt = buf;
|
|
|
|
struct ds_md_update_req *rp;
|
|
|
|
struct {
|
|
|
|
struct ds_data data;
|
|
|
|
struct ds_md_update_res res;
|
|
|
|
} pkt;
|
|
|
|
|
|
|
|
rp = (struct ds_md_update_req *) (dpkt + 1);
|
|
|
|
|
2007-07-13 00:55:55 +02:00
|
|
|
printk(KERN_INFO PFX "Machine description update.\n");
|
2007-07-12 03:51:31 +02:00
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
mdesc_update();
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
|
|
|
pkt.data.tag.type = DS_DATA;
|
|
|
|
pkt.data.tag.len = sizeof(pkt) - sizeof(struct ds_msg_tag);
|
|
|
|
pkt.data.handle = dp->handle;
|
|
|
|
pkt.res.req_num = rp->req_num;
|
|
|
|
pkt.res.result = DS_OK;
|
|
|
|
|
|
|
|
ds_send(lp, &pkt, sizeof(pkt));
|
|
|
|
}
|
|
|
|
|
|
|
|
struct ds_shutdown_req {
|
|
|
|
__u64 req_num;
|
|
|
|
__u32 ms_delay;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_shutdown_res {
|
|
|
|
__u64 req_num;
|
|
|
|
__u32 result;
|
|
|
|
char reason[1];
|
|
|
|
};
|
|
|
|
|
|
|
|
static void domain_shutdown_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *dp,
|
|
|
|
void *buf, int len)
|
|
|
|
{
|
|
|
|
struct ds_data *dpkt = buf;
|
|
|
|
struct ds_shutdown_req *rp;
|
|
|
|
struct {
|
|
|
|
struct ds_data data;
|
|
|
|
struct ds_shutdown_res res;
|
|
|
|
} pkt;
|
|
|
|
|
|
|
|
rp = (struct ds_shutdown_req *) (dpkt + 1);
|
|
|
|
|
|
|
|
printk(KERN_ALERT PFX "Shutdown request from "
|
|
|
|
"LDOM manager received.\n");
|
|
|
|
|
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
|
|
|
pkt.data.tag.type = DS_DATA;
|
|
|
|
pkt.data.tag.len = sizeof(pkt) - sizeof(struct ds_msg_tag);
|
|
|
|
pkt.data.handle = dp->handle;
|
|
|
|
pkt.res.req_num = rp->req_num;
|
|
|
|
pkt.res.result = DS_OK;
|
|
|
|
pkt.res.reason[0] = 0;
|
|
|
|
|
|
|
|
ds_send(lp, &pkt, sizeof(pkt));
|
|
|
|
|
|
|
|
wake_up_powerd();
|
|
|
|
}
|
|
|
|
|
|
|
|
struct ds_panic_req {
|
|
|
|
__u64 req_num;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_panic_res {
|
|
|
|
__u64 req_num;
|
|
|
|
__u32 result;
|
|
|
|
char reason[1];
|
|
|
|
};
|
|
|
|
|
|
|
|
static void domain_panic_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *dp,
|
|
|
|
void *buf, int len)
|
|
|
|
{
|
|
|
|
struct ds_data *dpkt = buf;
|
|
|
|
struct ds_panic_req *rp;
|
|
|
|
struct {
|
|
|
|
struct ds_data data;
|
|
|
|
struct ds_panic_res res;
|
|
|
|
} pkt;
|
|
|
|
|
|
|
|
rp = (struct ds_panic_req *) (dpkt + 1);
|
|
|
|
|
2007-07-13 00:55:55 +02:00
|
|
|
printk(KERN_ALERT PFX "Panic request from "
|
|
|
|
"LDOM manager received.\n");
|
2007-07-12 03:51:31 +02:00
|
|
|
|
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
|
|
|
pkt.data.tag.type = DS_DATA;
|
|
|
|
pkt.data.tag.len = sizeof(pkt) - sizeof(struct ds_msg_tag);
|
|
|
|
pkt.data.handle = dp->handle;
|
|
|
|
pkt.res.req_num = rp->req_num;
|
|
|
|
pkt.res.result = DS_OK;
|
|
|
|
pkt.res.reason[0] = 0;
|
|
|
|
|
|
|
|
ds_send(lp, &pkt, sizeof(pkt));
|
|
|
|
|
|
|
|
panic("PANIC requested by LDOM manager.");
|
|
|
|
}
|
|
|
|
|
2007-07-14 09:45:16 +02:00
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
struct dr_cpu_tag {
|
2007-07-12 03:51:31 +02:00
|
|
|
__u64 req_num;
|
|
|
|
__u32 type;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
#define DR_CPU_CONFIGURE 0x43
|
|
|
|
#define DR_CPU_UNCONFIGURE 0x55
|
|
|
|
#define DR_CPU_FORCE_UNCONFIGURE 0x46
|
|
|
|
#define DR_CPU_STATUS 0x53
|
2007-07-12 03:51:31 +02:00
|
|
|
|
|
|
|
/* Responses */
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
#define DR_CPU_OK 0x6f
|
|
|
|
#define DR_CPU_ERROR 0x65
|
2007-07-12 03:51:31 +02:00
|
|
|
|
|
|
|
__u32 num_records;
|
|
|
|
};
|
|
|
|
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
struct dr_cpu_resp_entry {
|
|
|
|
__u32 cpu;
|
|
|
|
__u32 result;
|
|
|
|
#define DR_CPU_RES_OK 0x00
|
|
|
|
#define DR_CPU_RES_FAILURE 0x01
|
|
|
|
#define DR_CPU_RES_BLOCKED 0x02
|
|
|
|
#define DR_CPU_RES_CPU_NOT_RESPONDING 0x03
|
|
|
|
#define DR_CPU_RES_NOT_IN_MD 0x04
|
|
|
|
|
|
|
|
__u32 stat;
|
|
|
|
#define DR_CPU_STAT_NOT_PRESENT 0x00
|
|
|
|
#define DR_CPU_STAT_UNCONFIGURED 0x01
|
|
|
|
#define DR_CPU_STAT_CONFIGURED 0x02
|
|
|
|
|
|
|
|
__u32 str_off;
|
2007-07-12 03:51:31 +02:00
|
|
|
};
|
|
|
|
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
static void __dr_cpu_send_error(struct ds_cap_state *cp, struct ds_data *data)
|
|
|
|
{
|
|
|
|
struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1);
|
|
|
|
struct ds_info *dp = ds_info;
|
|
|
|
struct {
|
|
|
|
struct ds_data data;
|
|
|
|
struct dr_cpu_tag tag;
|
|
|
|
} pkt;
|
|
|
|
int msg_len;
|
|
|
|
|
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
|
|
|
pkt.data.tag.type = DS_DATA;
|
|
|
|
pkt.data.handle = cp->handle;
|
|
|
|
pkt.tag.req_num = tag->req_num;
|
|
|
|
pkt.tag.type = DR_CPU_ERROR;
|
|
|
|
pkt.tag.num_records = 0;
|
|
|
|
|
|
|
|
msg_len = (sizeof(struct ds_data) +
|
|
|
|
sizeof(struct dr_cpu_tag));
|
|
|
|
|
|
|
|
pkt.data.tag.len = msg_len - sizeof(struct ds_msg_tag);
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
__ds_send(dp->lp, &pkt, msg_len);
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static void dr_cpu_send_error(struct ds_cap_state *cp, struct ds_data *data)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
|
|
|
__dr_cpu_send_error(cp, data);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define CPU_SENTINEL 0xffffffff
|
|
|
|
|
|
|
|
static void purge_dups(u32 *list, u32 num_ents)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < num_ents; i++) {
|
|
|
|
u32 cpu = list[i];
|
|
|
|
unsigned int j;
|
|
|
|
|
|
|
|
if (cpu == CPU_SENTINEL)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
for (j = i + 1; j < num_ents; j++) {
|
|
|
|
if (list[j] == cpu)
|
|
|
|
list[j] = CPU_SENTINEL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dr_cpu_size_response(int ncpus)
|
|
|
|
{
|
|
|
|
return (sizeof(struct ds_data) +
|
|
|
|
sizeof(struct dr_cpu_tag) +
|
|
|
|
(sizeof(struct dr_cpu_resp_entry) * ncpus));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dr_cpu_init_response(struct ds_data *resp, u64 req_num,
|
|
|
|
u64 handle, int resp_len, int ncpus,
|
|
|
|
cpumask_t *mask, u32 default_stat)
|
|
|
|
{
|
|
|
|
struct dr_cpu_resp_entry *ent;
|
|
|
|
struct dr_cpu_tag *tag;
|
|
|
|
int i, cpu;
|
|
|
|
|
|
|
|
tag = (struct dr_cpu_tag *) (resp + 1);
|
|
|
|
ent = (struct dr_cpu_resp_entry *) (tag + 1);
|
|
|
|
|
|
|
|
resp->tag.type = DS_DATA;
|
|
|
|
resp->tag.len = resp_len - sizeof(struct ds_msg_tag);
|
|
|
|
resp->handle = handle;
|
|
|
|
tag->req_num = req_num;
|
|
|
|
tag->type = DR_CPU_OK;
|
|
|
|
tag->num_records = ncpus;
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
for_each_cpu_mask(cpu, *mask) {
|
|
|
|
ent[i].cpu = cpu;
|
|
|
|
ent[i].result = DR_CPU_RES_OK;
|
|
|
|
ent[i].stat = default_stat;
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
BUG_ON(i != ncpus);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dr_cpu_mark(struct ds_data *resp, int cpu, int ncpus,
|
|
|
|
u32 res, u32 stat)
|
|
|
|
{
|
|
|
|
struct dr_cpu_resp_entry *ent;
|
|
|
|
struct dr_cpu_tag *tag;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
tag = (struct dr_cpu_tag *) (resp + 1);
|
|
|
|
ent = (struct dr_cpu_resp_entry *) (tag + 1);
|
|
|
|
|
|
|
|
for (i = 0; i < ncpus; i++) {
|
|
|
|
if (ent[i].cpu != cpu)
|
|
|
|
continue;
|
|
|
|
ent[i].result = res;
|
|
|
|
ent[i].stat = stat;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dr_cpu_configure(struct ds_cap_state *cp, u64 req_num,
|
|
|
|
cpumask_t *mask)
|
|
|
|
{
|
|
|
|
struct ds_data *resp;
|
|
|
|
int resp_len, ncpus, cpu;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
ncpus = cpus_weight(*mask);
|
|
|
|
resp_len = dr_cpu_size_response(ncpus);
|
|
|
|
resp = kzalloc(resp_len, GFP_KERNEL);
|
|
|
|
if (!resp)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
dr_cpu_init_response(resp, req_num, cp->handle,
|
|
|
|
resp_len, ncpus, mask,
|
|
|
|
DR_CPU_STAT_CONFIGURED);
|
|
|
|
|
|
|
|
mdesc_fill_in_cpu_data(*mask);
|
|
|
|
|
|
|
|
for_each_cpu_mask(cpu, *mask) {
|
|
|
|
int err;
|
|
|
|
|
|
|
|
printk(KERN_INFO PFX "Starting cpu %d...\n", cpu);
|
|
|
|
err = cpu_up(cpu);
|
2007-07-14 12:14:45 +02:00
|
|
|
if (err) {
|
2007-07-15 11:02:01 +02:00
|
|
|
__u32 res = DR_CPU_RES_FAILURE;
|
|
|
|
__u32 stat = DR_CPU_STAT_UNCONFIGURED;
|
|
|
|
|
|
|
|
if (!cpu_present(cpu)) {
|
|
|
|
/* CPU not present in MD */
|
|
|
|
res = DR_CPU_RES_NOT_IN_MD;
|
|
|
|
stat = DR_CPU_STAT_NOT_PRESENT;
|
|
|
|
} else if (err == -ENODEV) {
|
|
|
|
/* CPU did not call in successfully */
|
|
|
|
res = DR_CPU_RES_CPU_NOT_RESPONDING;
|
|
|
|
}
|
|
|
|
|
2007-07-14 12:14:45 +02:00
|
|
|
printk(KERN_INFO PFX "CPU startup failed err=%d\n",
|
|
|
|
err);
|
2007-07-15 11:02:01 +02:00
|
|
|
dr_cpu_mark(resp, cpu, ncpus, res, stat);
|
2007-07-14 12:14:45 +02:00
|
|
|
}
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
2007-07-17 01:50:36 +02:00
|
|
|
__ds_send(ds_info->lp, resp, resp_len);
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
|
|
|
|
kfree(resp);
|
|
|
|
|
2007-07-16 12:49:40 +02:00
|
|
|
/* Redistribute IRQs, taking into account the new cpus. */
|
|
|
|
fixup_irqs();
|
|
|
|
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dr_cpu_unconfigure(struct ds_cap_state *cp, u64 req_num,
|
|
|
|
cpumask_t *mask)
|
|
|
|
{
|
|
|
|
struct ds_data *resp;
|
2007-07-16 12:49:40 +02:00
|
|
|
int resp_len, ncpus, cpu;
|
|
|
|
unsigned long flags;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
|
|
|
|
ncpus = cpus_weight(*mask);
|
|
|
|
resp_len = dr_cpu_size_response(ncpus);
|
|
|
|
resp = kzalloc(resp_len, GFP_KERNEL);
|
|
|
|
if (!resp)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
dr_cpu_init_response(resp, req_num, cp->handle,
|
|
|
|
resp_len, ncpus, mask,
|
|
|
|
DR_CPU_STAT_UNCONFIGURED);
|
|
|
|
|
2007-07-16 12:49:40 +02:00
|
|
|
for_each_cpu_mask(cpu, *mask) {
|
|
|
|
int err;
|
|
|
|
|
|
|
|
printk(KERN_INFO PFX "CPU[%d]: Shutting down cpu %d...\n",
|
|
|
|
smp_processor_id(), cpu);
|
|
|
|
err = cpu_down(cpu);
|
|
|
|
if (err)
|
|
|
|
dr_cpu_mark(resp, cpu, ncpus,
|
|
|
|
DR_CPU_RES_FAILURE,
|
|
|
|
DR_CPU_STAT_CONFIGURED);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
2007-07-17 01:50:36 +02:00
|
|
|
__ds_send(ds_info->lp, resp, resp_len);
|
2007-07-16 12:49:40 +02:00
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
kfree(resp);
|
|
|
|
|
2007-07-16 12:49:40 +02:00
|
|
|
return 0;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
}
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
static void dr_cpu_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *cp,
|
|
|
|
void *buf, int len)
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
{
|
2007-07-17 01:50:36 +02:00
|
|
|
struct ds_data *data = buf;
|
|
|
|
struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1);
|
|
|
|
u32 *cpu_list = (u32 *) (tag + 1);
|
|
|
|
u64 req_num = tag->req_num;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
cpumask_t mask;
|
2007-07-17 01:50:36 +02:00
|
|
|
unsigned int i;
|
|
|
|
int err;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
switch (tag->type) {
|
|
|
|
case DR_CPU_CONFIGURE:
|
|
|
|
case DR_CPU_UNCONFIGURE:
|
|
|
|
case DR_CPU_FORCE_UNCONFIGURE:
|
|
|
|
break;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
default:
|
|
|
|
dr_cpu_send_error(cp, data);
|
|
|
|
return;
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
}
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
purge_dups(cpu_list, tag->num_records);
|
2007-07-14 12:14:45 +02:00
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
cpus_clear(mask);
|
|
|
|
for (i = 0; i < tag->num_records; i++) {
|
|
|
|
if (cpu_list[i] == CPU_SENTINEL)
|
|
|
|
continue;
|
2007-07-14 12:14:45 +02:00
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
if (cpu_list[i] < NR_CPUS)
|
|
|
|
cpu_set(cpu_list[i], mask);
|
2007-07-14 12:14:45 +02:00
|
|
|
}
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
if (tag->type == DR_CPU_CONFIGURE)
|
|
|
|
err = dr_cpu_configure(cp, req_num, &mask);
|
|
|
|
else
|
|
|
|
err = dr_cpu_unconfigure(cp, req_num, &mask);
|
2007-07-12 03:51:31 +02:00
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
if (err)
|
|
|
|
dr_cpu_send_error(cp, data);
|
2007-07-12 03:51:31 +02:00
|
|
|
}
|
2007-07-17 01:50:36 +02:00
|
|
|
#endif /* CONFIG_HOTPLUG_CPU */
|
2007-07-12 03:51:31 +02:00
|
|
|
|
|
|
|
struct ds_pri_msg {
|
|
|
|
__u64 req_num;
|
|
|
|
__u64 type;
|
|
|
|
#define DS_PRI_REQUEST 0x00
|
|
|
|
#define DS_PRI_DATA 0x01
|
|
|
|
#define DS_PRI_UPDATE 0x02
|
|
|
|
};
|
|
|
|
|
|
|
|
static void ds_pri_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *dp,
|
|
|
|
void *buf, int len)
|
|
|
|
{
|
|
|
|
struct ds_data *dpkt = buf;
|
|
|
|
struct ds_pri_msg *rp;
|
|
|
|
|
|
|
|
rp = (struct ds_pri_msg *) (dpkt + 1);
|
|
|
|
|
2007-07-13 00:55:55 +02:00
|
|
|
printk(KERN_INFO PFX "PRI REQ [%lx:%lx], len=%d\n",
|
2007-07-12 03:51:31 +02:00
|
|
|
rp->req_num, rp->type, len);
|
|
|
|
}
|
|
|
|
|
2007-07-13 00:55:55 +02:00
|
|
|
struct ds_var_hdr {
|
|
|
|
__u32 type;
|
|
|
|
#define DS_VAR_SET_REQ 0x00
|
|
|
|
#define DS_VAR_DELETE_REQ 0x01
|
|
|
|
#define DS_VAR_SET_RESP 0x02
|
|
|
|
#define DS_VAR_DELETE_RESP 0x03
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_var_set_msg {
|
|
|
|
struct ds_var_hdr hdr;
|
|
|
|
char name_and_value[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_var_delete_msg {
|
|
|
|
struct ds_var_hdr hdr;
|
|
|
|
char name[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ds_var_resp {
|
|
|
|
struct ds_var_hdr hdr;
|
|
|
|
__u32 result;
|
|
|
|
#define DS_VAR_SUCCESS 0x00
|
|
|
|
#define DS_VAR_NO_SPACE 0x01
|
|
|
|
#define DS_VAR_INVALID_VAR 0x02
|
|
|
|
#define DS_VAR_INVALID_VAL 0x03
|
|
|
|
#define DS_VAR_NOT_PRESENT 0x04
|
|
|
|
};
|
|
|
|
|
|
|
|
static DEFINE_MUTEX(ds_var_mutex);
|
|
|
|
static int ds_var_doorbell;
|
|
|
|
static int ds_var_response;
|
|
|
|
|
|
|
|
static void ds_var_data(struct ldc_channel *lp,
|
|
|
|
struct ds_cap_state *dp,
|
|
|
|
void *buf, int len)
|
|
|
|
{
|
|
|
|
struct ds_data *dpkt = buf;
|
|
|
|
struct ds_var_resp *rp;
|
|
|
|
|
|
|
|
rp = (struct ds_var_resp *) (dpkt + 1);
|
|
|
|
|
|
|
|
if (rp->hdr.type != DS_VAR_SET_RESP &&
|
|
|
|
rp->hdr.type != DS_VAR_DELETE_RESP)
|
|
|
|
return;
|
|
|
|
|
|
|
|
ds_var_response = rp->result;
|
|
|
|
wmb();
|
|
|
|
ds_var_doorbell = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
void ldom_set_var(const char *var, const char *value)
|
|
|
|
{
|
|
|
|
struct ds_info *dp = ds_info;
|
|
|
|
struct ds_cap_state *cp;
|
|
|
|
|
|
|
|
cp = find_cap_by_string("var-config");
|
|
|
|
if (cp->state != CAP_STATE_REGISTERED)
|
|
|
|
cp = find_cap_by_string("var-config-backup");
|
|
|
|
|
|
|
|
if (cp->state == CAP_STATE_REGISTERED) {
|
|
|
|
union {
|
|
|
|
struct {
|
|
|
|
struct ds_data data;
|
|
|
|
struct ds_var_set_msg msg;
|
|
|
|
} header;
|
|
|
|
char all[512];
|
|
|
|
} pkt;
|
|
|
|
unsigned long flags;
|
|
|
|
char *base, *p;
|
|
|
|
int msg_len, loops;
|
|
|
|
|
|
|
|
memset(&pkt, 0, sizeof(pkt));
|
|
|
|
pkt.header.data.tag.type = DS_DATA;
|
|
|
|
pkt.header.data.handle = cp->handle;
|
|
|
|
pkt.header.msg.hdr.type = DS_VAR_SET_REQ;
|
|
|
|
base = p = &pkt.header.msg.name_and_value[0];
|
|
|
|
strcpy(p, var);
|
|
|
|
p += strlen(var) + 1;
|
|
|
|
strcpy(p, value);
|
|
|
|
p += strlen(value) + 1;
|
|
|
|
|
|
|
|
msg_len = (sizeof(struct ds_data) +
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
sizeof(struct ds_var_set_msg) +
|
|
|
|
(p - base));
|
2007-07-13 00:55:55 +02:00
|
|
|
msg_len = (msg_len + 3) & ~3;
|
|
|
|
pkt.header.data.tag.len = msg_len - sizeof(struct ds_msg_tag);
|
|
|
|
|
|
|
|
mutex_lock(&ds_var_mutex);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
|
|
|
ds_var_doorbell = 0;
|
|
|
|
ds_var_response = -1;
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
__ds_send(dp->lp, &pkt, msg_len);
|
2007-07-13 00:55:55 +02:00
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
|
|
|
|
loops = 1000;
|
|
|
|
while (ds_var_doorbell == 0) {
|
|
|
|
if (loops-- < 0)
|
|
|
|
break;
|
|
|
|
barrier();
|
|
|
|
udelay(100);
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&ds_var_mutex);
|
|
|
|
|
|
|
|
if (ds_var_doorbell == 0 ||
|
|
|
|
ds_var_response != DS_VAR_SUCCESS)
|
|
|
|
printk(KERN_ERR PFX "var-config [%s:%s] "
|
|
|
|
"failed, response(%d).\n",
|
|
|
|
var, value,
|
|
|
|
ds_var_response);
|
|
|
|
} else {
|
|
|
|
printk(KERN_ERR PFX "var-config not registered so "
|
|
|
|
"could not set (%s) variable to (%s).\n",
|
|
|
|
var, value);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void ldom_reboot(const char *boot_command)
|
|
|
|
{
|
|
|
|
/* Don't bother with any of this if the boot_command
|
|
|
|
* is empty.
|
|
|
|
*/
|
|
|
|
if (boot_command && strlen(boot_command)) {
|
|
|
|
char full_boot_str[256];
|
|
|
|
|
|
|
|
strcpy(full_boot_str, "boot ");
|
|
|
|
strcpy(full_boot_str + strlen("boot "), boot_command);
|
|
|
|
|
|
|
|
ldom_set_var("reboot-command", full_boot_str);
|
|
|
|
}
|
|
|
|
sun4v_mach_sir();
|
|
|
|
}
|
|
|
|
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
void ldom_power_off(void)
|
|
|
|
{
|
|
|
|
sun4v_mach_exit(0);
|
|
|
|
}
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
static void ds_conn_reset(struct ds_info *dp)
|
|
|
|
{
|
|
|
|
printk(KERN_ERR PFX "ds_conn_reset() from %p\n",
|
|
|
|
__builtin_return_address(0));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int register_services(struct ds_info *dp)
|
|
|
|
{
|
|
|
|
struct ldc_channel *lp = dp->lp;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ds_states); i++) {
|
|
|
|
struct {
|
|
|
|
struct ds_reg_req req;
|
|
|
|
u8 id_buf[256];
|
|
|
|
} pbuf;
|
|
|
|
struct ds_cap_state *cp = &ds_states[i];
|
|
|
|
int err, msg_len;
|
|
|
|
u64 new_count;
|
|
|
|
|
|
|
|
if (cp->state == CAP_STATE_REGISTERED)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
new_count = sched_clock() & 0xffffffff;
|
|
|
|
cp->handle = ((u64) i << 32) | new_count;
|
|
|
|
|
|
|
|
msg_len = (sizeof(struct ds_reg_req) +
|
|
|
|
strlen(cp->service_id));
|
|
|
|
|
|
|
|
memset(&pbuf, 0, sizeof(pbuf));
|
|
|
|
pbuf.req.tag.type = DS_REG_REQ;
|
|
|
|
pbuf.req.tag.len = (msg_len - sizeof(struct ds_msg_tag));
|
|
|
|
pbuf.req.handle = cp->handle;
|
|
|
|
pbuf.req.major = 1;
|
|
|
|
pbuf.req.minor = 0;
|
|
|
|
strcpy(pbuf.req.svc_id, cp->service_id);
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
err = __ds_send(lp, &pbuf, msg_len);
|
2007-07-12 03:51:31 +02:00
|
|
|
if (err > 0)
|
|
|
|
cp->state = CAP_STATE_REG_SENT;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ds_handshake(struct ds_info *dp, struct ds_msg_tag *pkt)
|
|
|
|
{
|
|
|
|
|
|
|
|
if (dp->hs_state == DS_HS_START) {
|
|
|
|
if (pkt->type != DS_INIT_ACK)
|
|
|
|
goto conn_reset;
|
|
|
|
|
|
|
|
dp->hs_state = DS_HS_DONE;
|
|
|
|
|
|
|
|
return register_services(dp);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dp->hs_state != DS_HS_DONE)
|
|
|
|
goto conn_reset;
|
|
|
|
|
|
|
|
if (pkt->type == DS_REG_ACK) {
|
|
|
|
struct ds_reg_ack *ap = (struct ds_reg_ack *) pkt;
|
|
|
|
struct ds_cap_state *cp = find_cap(ap->handle);
|
|
|
|
|
|
|
|
if (!cp) {
|
|
|
|
printk(KERN_ERR PFX "REG ACK for unknown handle %lx\n",
|
|
|
|
ap->handle);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
printk(KERN_INFO PFX "Registered %s service.\n",
|
|
|
|
cp->service_id);
|
|
|
|
cp->state = CAP_STATE_REGISTERED;
|
|
|
|
} else if (pkt->type == DS_REG_NACK) {
|
|
|
|
struct ds_reg_nack *np = (struct ds_reg_nack *) pkt;
|
|
|
|
struct ds_cap_state *cp = find_cap(np->handle);
|
|
|
|
|
|
|
|
if (!cp) {
|
|
|
|
printk(KERN_ERR PFX "REG NACK for "
|
|
|
|
"unknown handle %lx\n",
|
|
|
|
np->handle);
|
|
|
|
return 0;
|
|
|
|
}
|
[SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.
When new cpus are configured, the machine description is
updated. When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus. That code
also proceeds to update the SMT/multi-core scheduling bitmaps.
cpu_up() does all the work and we return the status back
over the DS channel.
CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:
1) A new trampoline mechanism. CPUs are booted straight
out of the hypervisor with MMU disabled and running in
physical addresses with no mappings installed in the TLB.
The new hvtramp.S code sets up the critical cpu state,
installs the locked TLB mappings for the kernel, and
turns the MMU on. It then proceeds to follow the logic
of the existing trampoline.S SMP cpu bringup code.
2) All calls into OBP have to be disallowed when domaining
is enabled. Since cpus boot straight into the kernel from
the hypervisor, OBP has no state about that cpu and therefore
cannot handle being invoked on that cpu.
Luckily it's only a handful of interfaces which can be called
after the OBP device tree is obtained. For example, rebooting,
halting, powering-off, and setting options node variables.
CPU removal support will require some infrastructure changes
here. Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue. workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed. Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.
Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed. So new code will be needed
to walk the active INO list and retarget those cpus as-needed.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 01:03:42 +02:00
|
|
|
printk(KERN_INFO PFX "Could not register %s service\n",
|
2007-07-12 03:51:31 +02:00
|
|
|
cp->service_id);
|
|
|
|
cp->state = CAP_STATE_UNKNOWN;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
conn_reset:
|
|
|
|
ds_conn_reset(dp);
|
|
|
|
return -ECONNRESET;
|
|
|
|
}
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
static void __send_ds_nack(struct ds_info *dp, u64 handle)
|
|
|
|
{
|
|
|
|
struct ds_data_nack nack = {
|
|
|
|
.tag = {
|
|
|
|
.type = DS_NACK,
|
|
|
|
.len = (sizeof(struct ds_data_nack) -
|
|
|
|
sizeof(struct ds_msg_tag)),
|
|
|
|
},
|
|
|
|
.handle = handle,
|
|
|
|
.result = DS_INV_HDL,
|
|
|
|
};
|
|
|
|
|
|
|
|
__ds_send(dp->lp, &nack, sizeof(nack));
|
|
|
|
}
|
|
|
|
|
|
|
|
static LIST_HEAD(ds_work_list);
|
|
|
|
static DECLARE_WAIT_QUEUE_HEAD(ds_wait);
|
|
|
|
|
|
|
|
struct ds_queue_entry {
|
|
|
|
struct list_head list;
|
|
|
|
int req_len;
|
|
|
|
int __pad;
|
|
|
|
u64 req[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
static void process_ds_work(void)
|
|
|
|
{
|
|
|
|
struct ds_queue_entry *qp, *tmp;
|
|
|
|
static struct ds_info *dp;
|
|
|
|
unsigned long flags;
|
|
|
|
LIST_HEAD(todo);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
|
|
|
list_splice(&ds_work_list, &todo);
|
|
|
|
INIT_LIST_HEAD(&ds_work_list);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
|
|
|
|
dp = ds_info;
|
|
|
|
|
|
|
|
list_for_each_entry_safe(qp, tmp, &todo, list) {
|
|
|
|
struct ds_data *dpkt = (struct ds_data *) qp->req;
|
|
|
|
struct ds_cap_state *cp = find_cap(dpkt->handle);
|
|
|
|
int req_len = qp->req_len;
|
|
|
|
|
|
|
|
if (!cp) {
|
|
|
|
printk(KERN_ERR PFX "Data for unknown handle %lu\n",
|
|
|
|
dpkt->handle);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
|
|
|
__send_ds_nack(dp, dpkt->handle);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
} else {
|
|
|
|
cp->data(dp->lp, cp, dpkt, req_len);
|
|
|
|
}
|
|
|
|
|
|
|
|
list_del(&qp->list);
|
|
|
|
kfree(qp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ds_thread(void *__unused)
|
|
|
|
{
|
|
|
|
DEFINE_WAIT(wait);
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
prepare_to_wait(&ds_wait, &wait, TASK_INTERRUPTIBLE);
|
|
|
|
if (list_empty(&ds_work_list))
|
|
|
|
schedule();
|
|
|
|
finish_wait(&ds_wait, &wait);
|
|
|
|
|
|
|
|
if (kthread_should_stop())
|
|
|
|
break;
|
|
|
|
|
|
|
|
process_ds_work();
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
static int ds_data(struct ds_info *dp, struct ds_msg_tag *pkt, int len)
|
|
|
|
{
|
|
|
|
struct ds_data *dpkt = (struct ds_data *) pkt;
|
2007-07-17 01:50:36 +02:00
|
|
|
struct ds_queue_entry *qp;
|
|
|
|
|
|
|
|
qp = kmalloc(sizeof(struct ds_queue_entry) + len, GFP_ATOMIC);
|
|
|
|
if (!qp) {
|
|
|
|
__send_ds_nack(dp, dpkt->handle);
|
2007-07-12 03:51:31 +02:00
|
|
|
} else {
|
2007-07-17 01:50:36 +02:00
|
|
|
memcpy(&qp->req, pkt, len);
|
|
|
|
list_add_tail(&qp->list, &ds_work_list);
|
|
|
|
wake_up(&ds_wait);
|
2007-07-12 03:51:31 +02:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ds_up(struct ds_info *dp)
|
|
|
|
{
|
|
|
|
struct ldc_channel *lp = dp->lp;
|
|
|
|
struct ds_ver_req req;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
req.tag.type = DS_INIT_REQ;
|
|
|
|
req.tag.len = sizeof(req) - sizeof(struct ds_msg_tag);
|
|
|
|
req.ver.major = 1;
|
|
|
|
req.ver.minor = 0;
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
err = __ds_send(lp, &req, sizeof(req));
|
2007-07-12 03:51:31 +02:00
|
|
|
if (err > 0)
|
|
|
|
dp->hs_state = DS_HS_START;
|
|
|
|
}
|
|
|
|
|
2007-07-18 08:12:20 +02:00
|
|
|
static void ds_reset(struct ds_info *dp)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
dp->hs_state = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ds_states); i++) {
|
|
|
|
struct ds_cap_state *cp = &ds_states[i];
|
|
|
|
|
|
|
|
cp->state = CAP_STATE_UNKNOWN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
static void ds_event(void *arg, int event)
|
|
|
|
{
|
|
|
|
struct ds_info *dp = arg;
|
|
|
|
struct ldc_channel *lp = dp->lp;
|
|
|
|
unsigned long flags;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ds_lock, flags);
|
|
|
|
|
|
|
|
if (event == LDC_EVENT_UP) {
|
|
|
|
ds_up(dp);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2007-07-18 08:12:20 +02:00
|
|
|
if (event == LDC_EVENT_RESET) {
|
|
|
|
ds_reset(dp);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
if (event != LDC_EVENT_DATA_READY) {
|
|
|
|
printk(KERN_WARNING PFX "Unexpected LDC event %d\n", event);
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = 0;
|
|
|
|
while (1) {
|
|
|
|
struct ds_msg_tag *tag;
|
|
|
|
|
|
|
|
err = ldc_read(lp, dp->rcv_buf, sizeof(*tag));
|
|
|
|
|
|
|
|
if (unlikely(err < 0)) {
|
|
|
|
if (err == -ECONNRESET)
|
|
|
|
ds_conn_reset(dp);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (err == 0)
|
|
|
|
break;
|
|
|
|
|
|
|
|
tag = dp->rcv_buf;
|
|
|
|
err = ldc_read(lp, tag + 1, tag->len);
|
|
|
|
|
|
|
|
if (unlikely(err < 0)) {
|
|
|
|
if (err == -ECONNRESET)
|
|
|
|
ds_conn_reset(dp);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (err < tag->len)
|
|
|
|
break;
|
|
|
|
|
|
|
|
if (tag->type < DS_DATA)
|
|
|
|
err = ds_handshake(dp, dp->rcv_buf);
|
|
|
|
else
|
|
|
|
err = ds_data(dp, dp->rcv_buf,
|
|
|
|
sizeof(*tag) + err);
|
|
|
|
if (err == -ECONNRESET)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&ds_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit ds_probe(struct vio_dev *vdev,
|
|
|
|
const struct vio_device_id *id)
|
|
|
|
{
|
|
|
|
static int ds_version_printed;
|
|
|
|
struct ldc_channel_config ds_cfg = {
|
|
|
|
.event = ds_event,
|
|
|
|
.mtu = 4096,
|
|
|
|
.mode = LDC_MODE_STREAM,
|
|
|
|
};
|
|
|
|
struct ldc_channel *lp;
|
|
|
|
struct ds_info *dp;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (ds_version_printed++ == 0)
|
|
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
|
|
|
|
dp = kzalloc(sizeof(*dp), GFP_KERNEL);
|
|
|
|
err = -ENOMEM;
|
|
|
|
if (!dp)
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
dp->rcv_buf = kzalloc(4096, GFP_KERNEL);
|
|
|
|
if (!dp->rcv_buf)
|
|
|
|
goto out_free_dp;
|
|
|
|
|
|
|
|
dp->rcv_buf_len = 4096;
|
|
|
|
|
2007-07-12 22:47:50 +02:00
|
|
|
ds_cfg.tx_irq = vdev->tx_irq;
|
|
|
|
ds_cfg.rx_irq = vdev->rx_irq;
|
2007-07-12 03:51:31 +02:00
|
|
|
|
2007-07-12 22:47:50 +02:00
|
|
|
lp = ldc_alloc(vdev->channel_id, &ds_cfg, dp);
|
2007-07-12 03:51:31 +02:00
|
|
|
if (IS_ERR(lp)) {
|
|
|
|
err = PTR_ERR(lp);
|
|
|
|
goto out_free_rcv_buf;
|
|
|
|
}
|
|
|
|
dp->lp = lp;
|
|
|
|
|
2007-07-12 08:22:55 +02:00
|
|
|
err = ldc_bind(lp, "DS");
|
2007-07-12 03:51:31 +02:00
|
|
|
if (err)
|
|
|
|
goto out_free_ldc;
|
|
|
|
|
2007-07-13 00:55:55 +02:00
|
|
|
ds_info = dp;
|
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
start_powerd();
|
|
|
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
out_free_ldc:
|
|
|
|
ldc_free(dp->lp);
|
|
|
|
|
|
|
|
out_free_rcv_buf:
|
|
|
|
kfree(dp->rcv_buf);
|
|
|
|
|
|
|
|
out_free_dp:
|
|
|
|
kfree(dp);
|
|
|
|
|
|
|
|
out_err:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ds_remove(struct vio_dev *vdev)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct vio_device_id ds_match[] = {
|
|
|
|
{
|
|
|
|
.type = "domain-services-port",
|
|
|
|
},
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct vio_driver ds_driver = {
|
|
|
|
.id_table = ds_match,
|
|
|
|
.probe = ds_probe,
|
|
|
|
.remove = ds_remove,
|
|
|
|
.driver = {
|
|
|
|
.name = "ds",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init ds_init(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ds_states); i++)
|
|
|
|
ds_states[i].handle = ((u64)i << 32);
|
|
|
|
|
2007-07-17 01:50:36 +02:00
|
|
|
kthread_run(ds_thread, NULL, "kldomd");
|
2007-07-14 12:14:45 +02:00
|
|
|
|
2007-07-12 03:51:31 +02:00
|
|
|
return vio_register_driver(&ds_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
subsys_initcall(ds_init);
|