2005-04-17 00:20:36 +02:00
|
|
|
|
/*
|
|
|
|
|
* intelfb
|
|
|
|
|
*
|
|
|
|
|
* Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
|
|
|
|
|
*
|
|
|
|
|
* Copyright <EFBFBD> 2002, 2003 David Dawes <dawes@xfree86.org>
|
|
|
|
|
* 2004 Sylvain Meyer
|
|
|
|
|
*
|
|
|
|
|
* This driver consists of two parts. The first part (intelfbdrv.c) provides
|
|
|
|
|
* the basic fbdev interfaces, is derived in part from the radeonfb and
|
|
|
|
|
* vesafb drivers, and is covered by the GPL. The second part (intelfbhw.c)
|
|
|
|
|
* provides the code to program the hardware. Most of it is derived from
|
|
|
|
|
* the i810/i830 XFree86 driver. The HW-specific code is covered here
|
|
|
|
|
* under a dual license (GPL and MIT/XFree86 license).
|
|
|
|
|
*
|
|
|
|
|
* Author: David Dawes
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
|
|
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
|
#include <linux/string.h>
|
|
|
|
|
#include <linux/mm.h>
|
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/fb.h>
|
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/pci.h>
|
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
|
#include <linux/pagemap.h>
|
2006-06-20 20:36:41 +02:00
|
|
|
|
#include <linux/interrupt.h>
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
|
|
|
|
#include "intelfb.h"
|
|
|
|
|
#include "intelfbhw.h"
|
|
|
|
|
|
2006-03-20 10:02:24 +01:00
|
|
|
|
struct pll_min_max {
|
2006-04-03 08:19:26 +02:00
|
|
|
|
int min_m, max_m, min_m1, max_m1;
|
|
|
|
|
int min_m2, max_m2, min_n, max_n;
|
|
|
|
|
int min_p, max_p, min_p1, max_p1;
|
|
|
|
|
int min_vco, max_vco, p_transition_clk, ref_clk;
|
2006-03-20 11:22:09 +01:00
|
|
|
|
int p_inc_lo, p_inc_hi;
|
2006-03-20 10:02:24 +01:00
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define PLLS_I8xx 0
|
|
|
|
|
#define PLLS_I9xx 1
|
|
|
|
|
#define PLLS_MAX 2
|
|
|
|
|
|
2006-03-24 02:31:14 +01:00
|
|
|
|
static struct pll_min_max plls[PLLS_MAX] = {
|
2006-04-03 08:19:26 +02:00
|
|
|
|
{ 108, 140, 18, 26,
|
|
|
|
|
6, 16, 3, 16,
|
|
|
|
|
4, 128, 0, 31,
|
|
|
|
|
930000, 1400000, 165000, 48000,
|
|
|
|
|
4, 2 }, //I8xx
|
|
|
|
|
|
|
|
|
|
{ 75, 120, 10, 20,
|
|
|
|
|
5, 9, 4, 7,
|
|
|
|
|
5, 80, 1, 8,
|
|
|
|
|
1400000, 2800000, 200000, 96000,
|
|
|
|
|
10, 5 } //I9xx
|
2006-03-20 10:02:24 +01:00
|
|
|
|
};
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
int
|
2006-03-20 10:26:45 +01:00
|
|
|
|
intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
|
2005-04-17 00:20:36 +02:00
|
|
|
|
{
|
|
|
|
|
u32 tmp;
|
2006-03-20 10:26:45 +01:00
|
|
|
|
if (!pdev || !dinfo)
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
|
|
switch (pdev->device) {
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_830M:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 830M";
|
|
|
|
|
dinfo->chipset = INTEL_830M;
|
|
|
|
|
dinfo->mobile = 1;
|
|
|
|
|
dinfo->pll_index = PLLS_I8xx;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_845G:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 845G";
|
|
|
|
|
dinfo->chipset = INTEL_845G;
|
|
|
|
|
dinfo->mobile = 0;
|
|
|
|
|
dinfo->pll_index = PLLS_I8xx;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_85XGM:
|
|
|
|
|
tmp = 0;
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->mobile = 1;
|
|
|
|
|
dinfo->pll_index = PLLS_I8xx;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
|
|
|
|
|
switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
|
|
|
|
|
INTEL_85X_VARIANT_MASK) {
|
|
|
|
|
case INTEL_VAR_855GME:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 855GME";
|
|
|
|
|
dinfo->chipset = INTEL_855GME;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_VAR_855GM:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 855GM";
|
|
|
|
|
dinfo->chipset = INTEL_855GM;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_VAR_852GME:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 852GME";
|
|
|
|
|
dinfo->chipset = INTEL_852GME;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_VAR_852GM:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 852GM";
|
|
|
|
|
dinfo->chipset = INTEL_852GM;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
default:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 852GM/855GM";
|
|
|
|
|
dinfo->chipset = INTEL_85XGM;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_865G:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 865G";
|
|
|
|
|
dinfo->chipset = INTEL_865G;
|
|
|
|
|
dinfo->mobile = 0;
|
|
|
|
|
dinfo->pll_index = PLLS_I8xx;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_915G:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 915G";
|
|
|
|
|
dinfo->chipset = INTEL_915G;
|
|
|
|
|
dinfo->mobile = 0;
|
|
|
|
|
dinfo->pll_index = PLLS_I9xx;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
2005-11-07 10:00:33 +01:00
|
|
|
|
case PCI_DEVICE_ID_INTEL_915GM:
|
2006-03-20 10:26:45 +01:00
|
|
|
|
dinfo->name = "Intel(R) 915GM";
|
|
|
|
|
dinfo->chipset = INTEL_915GM;
|
|
|
|
|
dinfo->mobile = 1;
|
|
|
|
|
dinfo->pll_index = PLLS_I9xx;
|
2005-11-07 10:00:33 +01:00
|
|
|
|
return 0;
|
2006-03-23 01:23:55 +01:00
|
|
|
|
case PCI_DEVICE_ID_INTEL_945G:
|
|
|
|
|
dinfo->name = "Intel(R) 945G";
|
|
|
|
|
dinfo->chipset = INTEL_945G;
|
|
|
|
|
dinfo->mobile = 0;
|
|
|
|
|
dinfo->pll_index = PLLS_I9xx;
|
|
|
|
|
return 0;
|
2006-03-23 11:53:05 +01:00
|
|
|
|
case PCI_DEVICE_ID_INTEL_945GM:
|
|
|
|
|
dinfo->name = "Intel(R) 945GM";
|
|
|
|
|
dinfo->chipset = INTEL_945GM;
|
|
|
|
|
dinfo->mobile = 1;
|
|
|
|
|
dinfo->pll_index = PLLS_I9xx;
|
|
|
|
|
return 0;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
default:
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
|
|
|
|
|
int *stolen_size)
|
|
|
|
|
{
|
|
|
|
|
struct pci_dev *bridge_dev;
|
|
|
|
|
u16 tmp;
|
2006-05-27 10:30:00 +02:00
|
|
|
|
int stolen_overhead;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
if (!pdev || !aperture_size || !stolen_size)
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
|
|
/* Find the bridge device. It is always 0:0.0 */
|
2006-10-20 23:36:00 +02:00
|
|
|
|
if (!(bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)))) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
ERR_MSG("cannot find bridge device\n");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Get the fb aperture size and "stolen" memory amount. */
|
|
|
|
|
tmp = 0;
|
|
|
|
|
pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
|
2006-10-20 23:36:00 +02:00
|
|
|
|
pci_dev_put(bridge_dev);
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
switch (pdev->device) {
|
2006-05-27 10:30:00 +02:00
|
|
|
|
case PCI_DEVICE_ID_INTEL_915G:
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_915GM:
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_945G:
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_945GM:
|
|
|
|
|
/* 915 and 945 chipsets support a 256MB aperture.
|
|
|
|
|
Aperture size is determined by inspected the
|
|
|
|
|
base address of the aperture. */
|
|
|
|
|
if (pci_resource_start(pdev, 2) & 0x08000000)
|
|
|
|
|
*aperture_size = MB(128);
|
|
|
|
|
else
|
|
|
|
|
*aperture_size = MB(256);
|
|
|
|
|
break;
|
|
|
|
|
default:
|
2005-04-17 00:20:36 +02:00
|
|
|
|
if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
|
|
|
|
|
*aperture_size = MB(64);
|
|
|
|
|
else
|
|
|
|
|
*aperture_size = MB(128);
|
2006-05-27 10:30:00 +02:00
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Stolen memory size is reduced by the GTT and the popup.
|
|
|
|
|
GTT is 1K per MB of aperture size, and popup is 4K. */
|
|
|
|
|
stolen_overhead = (*aperture_size / MB(1)) + 4;
|
|
|
|
|
switch(pdev->device) {
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_830M:
|
|
|
|
|
case PCI_DEVICE_ID_INTEL_845G:
|
2005-04-17 00:20:36 +02:00
|
|
|
|
switch (tmp & INTEL_830_GMCH_GMS_MASK) {
|
|
|
|
|
case INTEL_830_GMCH_GMS_STOLEN_512:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = KB(512) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_830_GMCH_GMS_STOLEN_1024:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(1) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_830_GMCH_GMS_STOLEN_8192:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(8) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_830_GMCH_GMS_LOCAL:
|
|
|
|
|
ERR_MSG("only local memory found\n");
|
|
|
|
|
return 1;
|
|
|
|
|
case INTEL_830_GMCH_GMS_DISABLED:
|
|
|
|
|
ERR_MSG("video memory is disabled\n");
|
|
|
|
|
return 1;
|
|
|
|
|
default:
|
|
|
|
|
ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
|
|
|
|
|
tmp & INTEL_830_GMCH_GMS_MASK);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
switch (tmp & INTEL_855_GMCH_GMS_MASK) {
|
|
|
|
|
case INTEL_855_GMCH_GMS_STOLEN_1M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(1) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_855_GMCH_GMS_STOLEN_4M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(4) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_855_GMCH_GMS_STOLEN_8M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(8) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_855_GMCH_GMS_STOLEN_16M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(16) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_855_GMCH_GMS_STOLEN_32M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(32) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_915G_GMCH_GMS_STOLEN_48M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(48) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_915G_GMCH_GMS_STOLEN_64M:
|
2006-05-27 10:30:00 +02:00
|
|
|
|
*stolen_size = MB(64) - KB(stolen_overhead);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
case INTEL_855_GMCH_GMS_DISABLED:
|
|
|
|
|
ERR_MSG("video memory is disabled\n");
|
|
|
|
|
return 0;
|
|
|
|
|
default:
|
|
|
|
|
ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
|
|
|
|
|
tmp & INTEL_855_GMCH_GMS_MASK);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_check_non_crt(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
int dvo = 0;
|
|
|
|
|
|
|
|
|
|
if (INREG(LVDS) & PORT_ENABLE)
|
|
|
|
|
dvo |= LVDS_PORT;
|
|
|
|
|
if (INREG(DVOA) & PORT_ENABLE)
|
|
|
|
|
dvo |= DVOA_PORT;
|
|
|
|
|
if (INREG(DVOB) & PORT_ENABLE)
|
|
|
|
|
dvo |= DVOB_PORT;
|
|
|
|
|
if (INREG(DVOC) & PORT_ENABLE)
|
|
|
|
|
dvo |= DVOC_PORT;
|
|
|
|
|
|
|
|
|
|
return dvo;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
const char *
|
|
|
|
|
intelfbhw_dvo_to_string(int dvo)
|
|
|
|
|
{
|
|
|
|
|
if (dvo & DVOA_PORT)
|
|
|
|
|
return "DVO port A";
|
|
|
|
|
else if (dvo & DVOB_PORT)
|
|
|
|
|
return "DVO port B";
|
|
|
|
|
else if (dvo & DVOC_PORT)
|
|
|
|
|
return "DVO port C";
|
|
|
|
|
else if (dvo & LVDS_PORT)
|
|
|
|
|
return "LVDS port";
|
|
|
|
|
else
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_validate_mode(struct intelfb_info *dinfo,
|
|
|
|
|
struct fb_var_screeninfo *var)
|
|
|
|
|
{
|
|
|
|
|
int bytes_per_pixel;
|
|
|
|
|
int tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_validate_mode\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
bytes_per_pixel = var->bits_per_pixel / 8;
|
|
|
|
|
if (bytes_per_pixel == 3)
|
|
|
|
|
bytes_per_pixel = 4;
|
|
|
|
|
|
|
|
|
|
/* Check if enough video memory. */
|
|
|
|
|
tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
|
|
|
|
|
if (tmp > dinfo->fb.size) {
|
|
|
|
|
WRN_MSG("Not enough video ram for mode "
|
|
|
|
|
"(%d KByte vs %d KByte).\n",
|
|
|
|
|
BtoKB(tmp), BtoKB(dinfo->fb.size));
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Check if x/y limits are OK. */
|
|
|
|
|
if (var->xres - 1 > HACTIVE_MASK) {
|
|
|
|
|
WRN_MSG("X resolution too large (%d vs %d).\n",
|
|
|
|
|
var->xres, HACTIVE_MASK + 1);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
if (var->yres - 1 > VACTIVE_MASK) {
|
|
|
|
|
WRN_MSG("Y resolution too large (%d vs %d).\n",
|
|
|
|
|
var->yres, VACTIVE_MASK + 1);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Check for interlaced/doublescan modes. */
|
|
|
|
|
if (var->vmode & FB_VMODE_INTERLACED) {
|
|
|
|
|
WRN_MSG("Mode is interlaced.\n");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
if (var->vmode & FB_VMODE_DOUBLE) {
|
|
|
|
|
WRN_MSG("Mode is double-scan.\n");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Check if clock is OK. */
|
|
|
|
|
tmp = 1000000000 / var->pixclock;
|
|
|
|
|
if (tmp < MIN_CLOCK) {
|
|
|
|
|
WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
|
|
|
|
|
(tmp + 500) / 1000, MIN_CLOCK / 1000);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
if (tmp > MAX_CLOCK) {
|
|
|
|
|
WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
|
|
|
|
|
(tmp + 500) / 1000, MAX_CLOCK / 1000);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
|
|
|
{
|
|
|
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
|
u32 offset, xoffset, yoffset;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_pan_display\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
xoffset = ROUND_DOWN_TO(var->xoffset, 8);
|
|
|
|
|
yoffset = var->yoffset;
|
|
|
|
|
|
|
|
|
|
if ((xoffset + var->xres > var->xres_virtual) ||
|
|
|
|
|
(yoffset + var->yres > var->yres_virtual))
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
offset = (yoffset * dinfo->pitch) +
|
|
|
|
|
(xoffset * var->bits_per_pixel) / 8;
|
|
|
|
|
|
|
|
|
|
offset += dinfo->fb.offset << 12;
|
|
|
|
|
|
2006-06-20 20:36:42 +02:00
|
|
|
|
dinfo->vsync.pan_offset = offset;
|
|
|
|
|
if ((var->activate & FB_ACTIVATE_VBL) && !intelfbhw_enable_irq(dinfo, 0)) {
|
|
|
|
|
dinfo->vsync.pan_display = 1;
|
|
|
|
|
} else {
|
|
|
|
|
dinfo->vsync.pan_display = 0;
|
|
|
|
|
OUTREG(DSPABASE, offset);
|
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Blank the screen. */
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_do_blank(int blank, struct fb_info *info)
|
|
|
|
|
{
|
|
|
|
|
struct intelfb_info *dinfo = GET_DINFO(info);
|
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Turn plane A on or off */
|
|
|
|
|
tmp = INREG(DSPACNTR);
|
|
|
|
|
if (blank)
|
|
|
|
|
tmp &= ~DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
else
|
|
|
|
|
tmp |= DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
OUTREG(DSPACNTR, tmp);
|
|
|
|
|
/* Flush */
|
|
|
|
|
tmp = INREG(DSPABASE);
|
|
|
|
|
OUTREG(DSPABASE, tmp);
|
|
|
|
|
|
|
|
|
|
/* Turn off/on the HW cursor */
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
|
|
|
|
|
#endif
|
|
|
|
|
if (dinfo->cursor_on) {
|
|
|
|
|
if (blank) {
|
|
|
|
|
intelfbhw_cursor_hide(dinfo);
|
|
|
|
|
} else {
|
|
|
|
|
intelfbhw_cursor_show(dinfo);
|
|
|
|
|
}
|
|
|
|
|
dinfo->cursor_on = 1;
|
|
|
|
|
}
|
|
|
|
|
dinfo->cursor_blanked = blank;
|
|
|
|
|
|
|
|
|
|
/* Set DPMS level */
|
|
|
|
|
tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
|
|
|
|
|
switch (blank) {
|
|
|
|
|
case FB_BLANK_UNBLANK:
|
|
|
|
|
case FB_BLANK_NORMAL:
|
|
|
|
|
tmp |= ADPA_DPMS_D0;
|
|
|
|
|
break;
|
|
|
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
|
|
|
tmp |= ADPA_DPMS_D1;
|
|
|
|
|
break;
|
|
|
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
|
|
|
tmp |= ADPA_DPMS_D2;
|
|
|
|
|
break;
|
|
|
|
|
case FB_BLANK_POWERDOWN:
|
|
|
|
|
tmp |= ADPA_DPMS_D3;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
OUTREG(ADPA, tmp);
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
|
|
|
|
|
unsigned red, unsigned green, unsigned blue,
|
|
|
|
|
unsigned transp)
|
|
|
|
|
{
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
|
|
|
|
|
regno, red, green, blue);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
u32 palette_reg = (dinfo->pipe == PIPE_A) ?
|
|
|
|
|
PALETTE_A : PALETTE_B;
|
|
|
|
|
|
|
|
|
|
OUTREG(palette_reg + (regno << 2),
|
|
|
|
|
(red << PALETTE_8_RED_SHIFT) |
|
|
|
|
|
(green << PALETTE_8_GREEN_SHIFT) |
|
|
|
|
|
(blue << PALETTE_8_BLUE_SHIFT));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_read_hw_state(struct intelfb_info *dinfo, struct intelfb_hwstate *hw,
|
|
|
|
|
int flag)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_read_hw_state\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!hw || !dinfo)
|
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
|
|
/* Read in as much of the HW state as possible. */
|
|
|
|
|
hw->vga0_divisor = INREG(VGA0_DIVISOR);
|
|
|
|
|
hw->vga1_divisor = INREG(VGA1_DIVISOR);
|
|
|
|
|
hw->vga_pd = INREG(VGAPD);
|
|
|
|
|
hw->dpll_a = INREG(DPLL_A);
|
|
|
|
|
hw->dpll_b = INREG(DPLL_B);
|
|
|
|
|
hw->fpa0 = INREG(FPA0);
|
|
|
|
|
hw->fpa1 = INREG(FPA1);
|
|
|
|
|
hw->fpb0 = INREG(FPB0);
|
|
|
|
|
hw->fpb1 = INREG(FPB1);
|
|
|
|
|
|
|
|
|
|
if (flag == 1)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
/* This seems to be a problem with the 852GM/855GM */
|
|
|
|
|
for (i = 0; i < PALETTE_8_ENTRIES; i++) {
|
|
|
|
|
hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
|
|
|
|
|
hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (flag == 2)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->htotal_a = INREG(HTOTAL_A);
|
|
|
|
|
hw->hblank_a = INREG(HBLANK_A);
|
|
|
|
|
hw->hsync_a = INREG(HSYNC_A);
|
|
|
|
|
hw->vtotal_a = INREG(VTOTAL_A);
|
|
|
|
|
hw->vblank_a = INREG(VBLANK_A);
|
|
|
|
|
hw->vsync_a = INREG(VSYNC_A);
|
|
|
|
|
hw->src_size_a = INREG(SRC_SIZE_A);
|
|
|
|
|
hw->bclrpat_a = INREG(BCLRPAT_A);
|
|
|
|
|
hw->htotal_b = INREG(HTOTAL_B);
|
|
|
|
|
hw->hblank_b = INREG(HBLANK_B);
|
|
|
|
|
hw->hsync_b = INREG(HSYNC_B);
|
|
|
|
|
hw->vtotal_b = INREG(VTOTAL_B);
|
|
|
|
|
hw->vblank_b = INREG(VBLANK_B);
|
|
|
|
|
hw->vsync_b = INREG(VSYNC_B);
|
|
|
|
|
hw->src_size_b = INREG(SRC_SIZE_B);
|
|
|
|
|
hw->bclrpat_b = INREG(BCLRPAT_B);
|
|
|
|
|
|
|
|
|
|
if (flag == 3)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->adpa = INREG(ADPA);
|
|
|
|
|
hw->dvoa = INREG(DVOA);
|
|
|
|
|
hw->dvob = INREG(DVOB);
|
|
|
|
|
hw->dvoc = INREG(DVOC);
|
|
|
|
|
hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
|
|
|
|
|
hw->dvob_srcdim = INREG(DVOB_SRCDIM);
|
|
|
|
|
hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
|
|
|
|
|
hw->lvds = INREG(LVDS);
|
|
|
|
|
|
|
|
|
|
if (flag == 4)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->pipe_a_conf = INREG(PIPEACONF);
|
|
|
|
|
hw->pipe_b_conf = INREG(PIPEBCONF);
|
|
|
|
|
hw->disp_arb = INREG(DISPARB);
|
|
|
|
|
|
|
|
|
|
if (flag == 5)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
|
|
|
|
|
hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
|
|
|
|
|
hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
|
|
|
|
|
hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
|
|
|
|
|
|
|
|
|
|
if (flag == 6)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
|
hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
|
|
|
|
|
hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (flag == 7)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->cursor_size = INREG(CURSOR_SIZE);
|
|
|
|
|
|
|
|
|
|
if (flag == 8)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->disp_a_ctrl = INREG(DSPACNTR);
|
|
|
|
|
hw->disp_b_ctrl = INREG(DSPBCNTR);
|
|
|
|
|
hw->disp_a_base = INREG(DSPABASE);
|
|
|
|
|
hw->disp_b_base = INREG(DSPBBASE);
|
|
|
|
|
hw->disp_a_stride = INREG(DSPASTRIDE);
|
|
|
|
|
hw->disp_b_stride = INREG(DSPBSTRIDE);
|
|
|
|
|
|
|
|
|
|
if (flag == 9)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->vgacntrl = INREG(VGACNTRL);
|
|
|
|
|
|
|
|
|
|
if (flag == 10)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
hw->add_id = INREG(ADD_ID);
|
|
|
|
|
|
|
|
|
|
if (flag == 11)
|
|
|
|
|
return flag;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
|
|
|
hw->swf0x[i] = INREG(SWF00 + (i << 2));
|
|
|
|
|
hw->swf1x[i] = INREG(SWF10 + (i << 2));
|
|
|
|
|
if (i < 3)
|
|
|
|
|
hw->swf3x[i] = INREG(SWF30 + (i << 2));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < 8; i++)
|
|
|
|
|
hw->fence[i] = INREG(FENCE + (i << 2));
|
|
|
|
|
|
|
|
|
|
hw->instpm = INREG(INSTPM);
|
|
|
|
|
hw->mem_mode = INREG(MEM_MODE);
|
|
|
|
|
hw->fw_blc_0 = INREG(FW_BLC_0);
|
|
|
|
|
hw->fw_blc_1 = INREG(FW_BLC_1);
|
|
|
|
|
|
2006-06-20 20:36:41 +02:00
|
|
|
|
hw->hwstam = INREG16(HWSTAM);
|
|
|
|
|
hw->ier = INREG16(IER);
|
|
|
|
|
hw->iir = INREG16(IIR);
|
|
|
|
|
hw->imr = INREG16(IMR);
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
2006-03-20 10:26:45 +01:00
|
|
|
|
static int calc_vclock3(int index, int m, int n, int p)
|
|
|
|
|
{
|
2006-03-23 02:30:05 +01:00
|
|
|
|
if (p == 0 || n == 0)
|
|
|
|
|
return 0;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
return plls[index].ref_clk * m / n / p;
|
2006-03-20 10:26:45 +01:00
|
|
|
|
}
|
2006-03-23 09:23:48 +01:00
|
|
|
|
|
2006-03-31 09:08:52 +02:00
|
|
|
|
static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2, int lvds)
|
2006-03-20 10:26:45 +01:00
|
|
|
|
{
|
2006-05-27 10:44:02 +02:00
|
|
|
|
struct pll_min_max *pll = &plls[index];
|
|
|
|
|
u32 m, vco, p;
|
|
|
|
|
|
|
|
|
|
m = (5 * (m1 + 2)) + (m2 + 2);
|
|
|
|
|
n += 2;
|
|
|
|
|
vco = pll->ref_clk * m / n;
|
|
|
|
|
|
|
|
|
|
if (index == PLLS_I8xx) {
|
|
|
|
|
p = ((p1 + 2) * (1 << (p2 + 1)));
|
|
|
|
|
} else {
|
|
|
|
|
p = ((p1) * (p2 ? 5 : 10));
|
2006-03-20 10:26:45 +01:00
|
|
|
|
}
|
2006-05-27 10:44:02 +02:00
|
|
|
|
return vco / p;
|
2006-03-20 10:26:45 +01:00
|
|
|
|
}
|
|
|
|
|
|
2006-08-22 02:12:58 +02:00
|
|
|
|
#if REGDUMP
|
2006-06-18 08:12:27 +02:00
|
|
|
|
static void
|
|
|
|
|
intelfbhw_get_p1p2(struct intelfb_info *dinfo, int dpll, int *o_p1, int *o_p2)
|
|
|
|
|
{
|
|
|
|
|
int p1, p2;
|
|
|
|
|
|
|
|
|
|
if (IS_I9XX(dinfo)) {
|
|
|
|
|
if (dpll & DPLL_P1_FORCE_DIV2)
|
|
|
|
|
p1 = 1;
|
|
|
|
|
else
|
|
|
|
|
p1 = (dpll >> DPLL_P1_SHIFT) & 0xff;
|
|
|
|
|
|
|
|
|
|
p1 = ffs(p1);
|
|
|
|
|
|
|
|
|
|
p2 = (dpll >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
|
|
|
|
|
} else {
|
|
|
|
|
if (dpll & DPLL_P1_FORCE_DIV2)
|
|
|
|
|
p1 = 0;
|
|
|
|
|
else
|
|
|
|
|
p1 = (dpll >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
|
|
|
|
|
p2 = (dpll >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*o_p1 = p1;
|
|
|
|
|
*o_p2 = p2;
|
|
|
|
|
}
|
2006-08-22 02:12:58 +02:00
|
|
|
|
#endif
|
2006-06-18 08:12:27 +02:00
|
|
|
|
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
void
|
|
|
|
|
intelfbhw_print_hw_state(struct intelfb_info *dinfo, struct intelfb_hwstate *hw)
|
|
|
|
|
{
|
|
|
|
|
#if REGDUMP
|
|
|
|
|
int i, m1, m2, n, p1, p2;
|
2006-03-20 10:26:45 +01:00
|
|
|
|
int index = dinfo->pll_index;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
DBG_MSG("intelfbhw_print_hw_state\n");
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2006-10-20 23:35:59 +02:00
|
|
|
|
if (!hw)
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return;
|
|
|
|
|
/* Read in as much of the HW state as possible. */
|
|
|
|
|
printk("hw state dump start\n");
|
|
|
|
|
printk(" VGA0_DIVISOR: 0x%08x\n", hw->vga0_divisor);
|
|
|
|
|
printk(" VGA1_DIVISOR: 0x%08x\n", hw->vga1_divisor);
|
|
|
|
|
printk(" VGAPD: 0x%08x\n", hw->vga_pd);
|
|
|
|
|
n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2006-06-18 08:12:27 +02:00
|
|
|
|
intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
|
2006-03-20 10:26:45 +01:00
|
|
|
|
m1, m2, n, p1, p2);
|
2006-03-23 09:23:48 +01:00
|
|
|
|
printk(" VGA0: clock is %d\n",
|
2006-03-31 09:08:52 +02:00
|
|
|
|
calc_vclock(index, m1, m2, n, p1, p2, 0));
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
2006-06-18 08:12:27 +02:00
|
|
|
|
|
|
|
|
|
intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
|
2006-03-20 10:26:45 +01:00
|
|
|
|
m1, m2, n, p1, p2);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
printk(" VGA1: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" DPLL_A: 0x%08x\n", hw->dpll_a);
|
|
|
|
|
printk(" DPLL_B: 0x%08x\n", hw->dpll_b);
|
|
|
|
|
printk(" FPA0: 0x%08x\n", hw->fpa0);
|
|
|
|
|
printk(" FPA1: 0x%08x\n", hw->fpa1);
|
|
|
|
|
printk(" FPB0: 0x%08x\n", hw->fpb0);
|
|
|
|
|
printk(" FPB1: 0x%08x\n", hw->fpb1);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2006-06-18 08:12:27 +02:00
|
|
|
|
intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
|
2006-03-20 10:26:45 +01:00
|
|
|
|
m1, m2, n, p1, p2);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
printk(" PLLA0: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
|
|
|
|
m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2006-06-18 08:12:27 +02:00
|
|
|
|
intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
|
2006-03-20 10:26:45 +01:00
|
|
|
|
m1, m2, n, p1, p2);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
printk(" PLLA1: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
#if 0
|
|
|
|
|
printk(" PALETTE_A:\n");
|
|
|
|
|
for (i = 0; i < PALETTE_8_ENTRIES)
|
2006-03-20 10:26:45 +01:00
|
|
|
|
printk(" %3d: 0x%08x\n", i, hw->palette_a[i]);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" PALETTE_B:\n");
|
|
|
|
|
for (i = 0; i < PALETTE_8_ENTRIES)
|
2006-03-20 10:26:45 +01:00
|
|
|
|
printk(" %3d: 0x%08x\n", i, hw->palette_b[i]);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
printk(" HTOTAL_A: 0x%08x\n", hw->htotal_a);
|
|
|
|
|
printk(" HBLANK_A: 0x%08x\n", hw->hblank_a);
|
|
|
|
|
printk(" HSYNC_A: 0x%08x\n", hw->hsync_a);
|
|
|
|
|
printk(" VTOTAL_A: 0x%08x\n", hw->vtotal_a);
|
|
|
|
|
printk(" VBLANK_A: 0x%08x\n", hw->vblank_a);
|
|
|
|
|
printk(" VSYNC_A: 0x%08x\n", hw->vsync_a);
|
|
|
|
|
printk(" SRC_SIZE_A: 0x%08x\n", hw->src_size_a);
|
|
|
|
|
printk(" BCLRPAT_A: 0x%08x\n", hw->bclrpat_a);
|
|
|
|
|
printk(" HTOTAL_B: 0x%08x\n", hw->htotal_b);
|
|
|
|
|
printk(" HBLANK_B: 0x%08x\n", hw->hblank_b);
|
|
|
|
|
printk(" HSYNC_B: 0x%08x\n", hw->hsync_b);
|
|
|
|
|
printk(" VTOTAL_B: 0x%08x\n", hw->vtotal_b);
|
|
|
|
|
printk(" VBLANK_B: 0x%08x\n", hw->vblank_b);
|
|
|
|
|
printk(" VSYNC_B: 0x%08x\n", hw->vsync_b);
|
|
|
|
|
printk(" SRC_SIZE_B: 0x%08x\n", hw->src_size_b);
|
|
|
|
|
printk(" BCLRPAT_B: 0x%08x\n", hw->bclrpat_b);
|
|
|
|
|
|
|
|
|
|
printk(" ADPA: 0x%08x\n", hw->adpa);
|
|
|
|
|
printk(" DVOA: 0x%08x\n", hw->dvoa);
|
|
|
|
|
printk(" DVOB: 0x%08x\n", hw->dvob);
|
|
|
|
|
printk(" DVOC: 0x%08x\n", hw->dvoc);
|
|
|
|
|
printk(" DVOA_SRCDIM: 0x%08x\n", hw->dvoa_srcdim);
|
|
|
|
|
printk(" DVOB_SRCDIM: 0x%08x\n", hw->dvob_srcdim);
|
|
|
|
|
printk(" DVOC_SRCDIM: 0x%08x\n", hw->dvoc_srcdim);
|
|
|
|
|
printk(" LVDS: 0x%08x\n", hw->lvds);
|
|
|
|
|
|
|
|
|
|
printk(" PIPEACONF: 0x%08x\n", hw->pipe_a_conf);
|
|
|
|
|
printk(" PIPEBCONF: 0x%08x\n", hw->pipe_b_conf);
|
|
|
|
|
printk(" DISPARB: 0x%08x\n", hw->disp_arb);
|
|
|
|
|
|
|
|
|
|
printk(" CURSOR_A_CONTROL: 0x%08x\n", hw->cursor_a_control);
|
|
|
|
|
printk(" CURSOR_B_CONTROL: 0x%08x\n", hw->cursor_b_control);
|
|
|
|
|
printk(" CURSOR_A_BASEADDR: 0x%08x\n", hw->cursor_a_base);
|
|
|
|
|
printk(" CURSOR_B_BASEADDR: 0x%08x\n", hw->cursor_b_base);
|
|
|
|
|
|
|
|
|
|
printk(" CURSOR_A_PALETTE: ");
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
|
printk("0x%08x", hw->cursor_a_palette[i]);
|
|
|
|
|
if (i < 3)
|
|
|
|
|
printk(", ");
|
|
|
|
|
}
|
|
|
|
|
printk("\n");
|
|
|
|
|
printk(" CURSOR_B_PALETTE: ");
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
|
printk("0x%08x", hw->cursor_b_palette[i]);
|
|
|
|
|
if (i < 3)
|
|
|
|
|
printk(", ");
|
|
|
|
|
}
|
|
|
|
|
printk("\n");
|
|
|
|
|
|
|
|
|
|
printk(" CURSOR_SIZE: 0x%08x\n", hw->cursor_size);
|
|
|
|
|
|
|
|
|
|
printk(" DSPACNTR: 0x%08x\n", hw->disp_a_ctrl);
|
|
|
|
|
printk(" DSPBCNTR: 0x%08x\n", hw->disp_b_ctrl);
|
|
|
|
|
printk(" DSPABASE: 0x%08x\n", hw->disp_a_base);
|
|
|
|
|
printk(" DSPBBASE: 0x%08x\n", hw->disp_b_base);
|
|
|
|
|
printk(" DSPASTRIDE: 0x%08x\n", hw->disp_a_stride);
|
|
|
|
|
printk(" DSPBSTRIDE: 0x%08x\n", hw->disp_b_stride);
|
|
|
|
|
|
|
|
|
|
printk(" VGACNTRL: 0x%08x\n", hw->vgacntrl);
|
|
|
|
|
printk(" ADD_ID: 0x%08x\n", hw->add_id);
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
|
|
|
printk(" SWF0%d 0x%08x\n", i,
|
|
|
|
|
hw->swf0x[i]);
|
|
|
|
|
}
|
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
|
|
|
printk(" SWF1%d 0x%08x\n", i,
|
|
|
|
|
hw->swf1x[i]);
|
|
|
|
|
}
|
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
|
printk(" SWF3%d 0x%08x\n", i,
|
2006-03-20 10:26:45 +01:00
|
|
|
|
hw->swf3x[i]);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
for (i = 0; i < 8; i++)
|
|
|
|
|
printk(" FENCE%d 0x%08x\n", i,
|
2006-03-20 10:26:45 +01:00
|
|
|
|
hw->fence[i]);
|
2006-03-23 09:23:48 +01:00
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk(" INSTPM 0x%08x\n", hw->instpm);
|
|
|
|
|
printk(" MEM_MODE 0x%08x\n", hw->mem_mode);
|
|
|
|
|
printk(" FW_BLC_0 0x%08x\n", hw->fw_blc_0);
|
|
|
|
|
printk(" FW_BLC_1 0x%08x\n", hw->fw_blc_1);
|
|
|
|
|
|
2006-06-20 20:36:41 +02:00
|
|
|
|
printk(" HWSTAM 0x%04x\n", hw->hwstam);
|
|
|
|
|
printk(" IER 0x%04x\n", hw->ier);
|
|
|
|
|
printk(" IIR 0x%04x\n", hw->iir);
|
|
|
|
|
printk(" IMR 0x%04x\n", hw->imr);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
printk("hw state dump end\n");
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
2006-03-23 09:23:48 +01:00
|
|
|
|
|
2006-03-20 10:26:45 +01:00
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
/* Split the M parameter into M1 and M2. */
|
|
|
|
|
static int
|
2006-03-20 10:02:24 +01:00
|
|
|
|
splitm(int index, unsigned int m, unsigned int *retm1, unsigned int *retm2)
|
2005-04-17 00:20:36 +02:00
|
|
|
|
{
|
|
|
|
|
int m1, m2;
|
2006-03-20 10:54:12 +01:00
|
|
|
|
int testm;
|
2006-05-27 10:44:02 +02:00
|
|
|
|
struct pll_min_max *pll = &plls[index];
|
|
|
|
|
|
2006-03-20 10:54:12 +01:00
|
|
|
|
/* no point optimising too much - brute force m */
|
2006-05-27 10:44:02 +02:00
|
|
|
|
for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
|
|
|
|
|
for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
|
2006-03-31 09:08:52 +02:00
|
|
|
|
testm = (5 * (m1 + 2)) + (m2 + 2);
|
2006-03-23 09:23:48 +01:00
|
|
|
|
if (testm == m) {
|
|
|
|
|
*retm1 = (unsigned int)m1;
|
|
|
|
|
*retm2 = (unsigned int)m2;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
2006-03-20 10:54:12 +01:00
|
|
|
|
return 1;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Split the P parameter into P1 and P2. */
|
|
|
|
|
static int
|
2006-03-20 10:02:24 +01:00
|
|
|
|
splitp(int index, unsigned int p, unsigned int *retp1, unsigned int *retp2)
|
2005-04-17 00:20:36 +02:00
|
|
|
|
{
|
|
|
|
|
int p1, p2;
|
2006-05-27 10:44:02 +02:00
|
|
|
|
struct pll_min_max *pll = &plls[index];
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
2006-03-23 09:23:48 +01:00
|
|
|
|
if (index == PLLS_I9xx) {
|
2006-04-03 08:19:26 +02:00
|
|
|
|
p2 = (p % 10) ? 1 : 0;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
|
|
|
|
p1 = p / (p2 ? 5 : 10);
|
|
|
|
|
|
2006-03-20 10:26:45 +01:00
|
|
|
|
*retp1 = (unsigned int)p1;
|
|
|
|
|
*retp2 = (unsigned int)p2;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-05-27 10:44:02 +02:00
|
|
|
|
if (p % 4 == 0)
|
|
|
|
|
p2 = 1;
|
|
|
|
|
else
|
|
|
|
|
p2 = 0;
|
|
|
|
|
p1 = (p / (1 << (p2 + 1))) - 2;
|
|
|
|
|
if (p % 4 == 0 && p1 < pll->min_p1) {
|
|
|
|
|
p2 = 0;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
p1 = (p / (1 << (p2 + 1))) - 2;
|
|
|
|
|
}
|
2006-05-27 10:44:02 +02:00
|
|
|
|
if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
|
|
|
|
|
(p1 + 2) * (1 << (p2 + 1)) != p) {
|
|
|
|
|
return 1;
|
|
|
|
|
} else {
|
|
|
|
|
*retp1 = (unsigned int)p1;
|
|
|
|
|
*retp2 = (unsigned int)p2;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
2006-03-20 10:02:24 +01:00
|
|
|
|
calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2, u32 *retn, u32 *retp1,
|
2005-04-17 00:20:36 +02:00
|
|
|
|
u32 *retp2, u32 *retclock)
|
|
|
|
|
{
|
2006-03-23 02:30:05 +01:00
|
|
|
|
u32 m1, m2, n, p1, p2, n1, testm;
|
|
|
|
|
u32 f_vco, p, p_best = 0, m, f_out = 0;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
u32 err_max, err_target, err_best = 10000000;
|
|
|
|
|
u32 n_best = 0, m_best = 0, f_best, f_err;
|
2006-04-03 08:19:26 +02:00
|
|
|
|
u32 p_min, p_max, p_inc, div_max;
|
|
|
|
|
struct pll_min_max *pll = &plls[index];
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
/* Accept 0.5% difference, but aim for 0.1% */
|
|
|
|
|
err_max = 5 * clock / 1000;
|
|
|
|
|
err_target = clock / 1000;
|
|
|
|
|
|
|
|
|
|
DBG_MSG("Clock is %d\n", clock);
|
|
|
|
|
|
2006-04-03 08:19:26 +02:00
|
|
|
|
div_max = pll->max_vco / clock;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
2006-04-03 08:19:26 +02:00
|
|
|
|
p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
|
|
|
|
|
p_min = p_inc;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
p_max = ROUND_DOWN_TO(div_max, p_inc);
|
2006-04-03 08:19:26 +02:00
|
|
|
|
if (p_min < pll->min_p)
|
|
|
|
|
p_min = pll->min_p;
|
|
|
|
|
if (p_max > pll->max_p)
|
|
|
|
|
p_max = pll->max_p;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
|
|
|
|
|
|
|
|
|
|
p = p_min;
|
|
|
|
|
do {
|
2006-03-20 10:02:24 +01:00
|
|
|
|
if (splitp(index, p, &p1, &p2)) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
WRN_MSG("cannot split p = %d\n", p);
|
|
|
|
|
p += p_inc;
|
|
|
|
|
continue;
|
|
|
|
|
}
|
2006-04-03 08:19:26 +02:00
|
|
|
|
n = pll->min_n;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
f_vco = clock * p;
|
|
|
|
|
|
|
|
|
|
do {
|
2006-04-03 08:19:26 +02:00
|
|
|
|
m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
|
|
|
|
|
if (m < pll->min_m)
|
|
|
|
|
m = pll->min_m + 1;
|
|
|
|
|
if (m > pll->max_m)
|
|
|
|
|
m = pll->max_m - 1;
|
2006-03-23 02:30:05 +01:00
|
|
|
|
for (testm = m - 1; testm <= m; testm++) {
|
2007-09-12 00:24:12 +02:00
|
|
|
|
f_out = calc_vclock3(index, testm, n, p);
|
2006-05-27 10:44:02 +02:00
|
|
|
|
if (splitm(index, testm, &m1, &m2)) {
|
2007-09-12 00:24:12 +02:00
|
|
|
|
WRN_MSG("cannot split m = %d\n",
|
|
|
|
|
testm);
|
2006-03-23 02:30:05 +01:00
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
if (clock > f_out)
|
|
|
|
|
f_err = clock - f_out;
|
|
|
|
|
else/* slightly bias the error for bigger clocks */
|
|
|
|
|
f_err = f_out - clock + 1;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
if (f_err < err_best) {
|
2006-05-27 10:44:02 +02:00
|
|
|
|
m_best = testm;
|
2006-03-23 02:30:05 +01:00
|
|
|
|
n_best = n;
|
|
|
|
|
p_best = p;
|
|
|
|
|
f_best = f_out;
|
|
|
|
|
err_best = f_err;
|
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
n++;
|
2006-04-03 08:19:26 +02:00
|
|
|
|
} while ((n <= pll->max_n) && (f_out >= clock));
|
2005-04-17 00:20:36 +02:00
|
|
|
|
p += p_inc;
|
|
|
|
|
} while ((p <= p_max));
|
|
|
|
|
|
|
|
|
|
if (!m_best) {
|
|
|
|
|
WRN_MSG("cannot find parameters for clock %d\n", clock);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
m = m_best;
|
|
|
|
|
n = n_best;
|
|
|
|
|
p = p_best;
|
2006-03-20 10:02:24 +01:00
|
|
|
|
splitm(index, m, &m1, &m2);
|
|
|
|
|
splitp(index, p, &p1, &p2);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
n1 = n - 2;
|
|
|
|
|
|
|
|
|
|
DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
|
|
|
|
|
"f: %d (%d), VCO: %d\n",
|
|
|
|
|
m, m1, m2, n, n1, p, p1, p2,
|
2006-03-23 09:23:48 +01:00
|
|
|
|
calc_vclock3(index, m, n, p),
|
2006-03-31 09:08:52 +02:00
|
|
|
|
calc_vclock(index, m1, m2, n1, p1, p2, 0),
|
2006-03-20 10:26:45 +01:00
|
|
|
|
calc_vclock3(index, m, n, p) * p);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
*retm1 = m1;
|
|
|
|
|
*retm2 = m2;
|
|
|
|
|
*retn = n1;
|
|
|
|
|
*retp1 = p1;
|
|
|
|
|
*retp2 = p2;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
*retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static __inline__ int
|
|
|
|
|
check_overflow(u32 value, u32 limit, const char *description)
|
|
|
|
|
{
|
|
|
|
|
if (value > limit) {
|
|
|
|
|
WRN_MSG("%s value %d exceeds limit %d\n",
|
|
|
|
|
description, value, limit);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* It is assumed that hw is filled in with the initial state information. */
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_mode_to_hw(struct intelfb_info *dinfo, struct intelfb_hwstate *hw,
|
|
|
|
|
struct fb_var_screeninfo *var)
|
|
|
|
|
{
|
|
|
|
|
int pipe = PIPE_A;
|
|
|
|
|
u32 *dpll, *fp0, *fp1;
|
|
|
|
|
u32 m1, m2, n, p1, p2, clock_target, clock;
|
|
|
|
|
u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
|
|
|
|
|
u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
|
|
|
|
|
u32 vsync_pol, hsync_pol;
|
|
|
|
|
u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
|
2006-05-27 10:17:52 +02:00
|
|
|
|
u32 stride_alignment;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
DBG_MSG("intelfbhw_mode_to_hw\n");
|
|
|
|
|
|
|
|
|
|
/* Disable VGA */
|
|
|
|
|
hw->vgacntrl |= VGA_DISABLE;
|
|
|
|
|
|
|
|
|
|
/* Check whether pipe A or pipe B is enabled. */
|
|
|
|
|
if (hw->pipe_a_conf & PIPECONF_ENABLE)
|
|
|
|
|
pipe = PIPE_A;
|
|
|
|
|
else if (hw->pipe_b_conf & PIPECONF_ENABLE)
|
|
|
|
|
pipe = PIPE_B;
|
|
|
|
|
|
|
|
|
|
/* Set which pipe's registers will be set. */
|
|
|
|
|
if (pipe == PIPE_B) {
|
|
|
|
|
dpll = &hw->dpll_b;
|
|
|
|
|
fp0 = &hw->fpb0;
|
|
|
|
|
fp1 = &hw->fpb1;
|
|
|
|
|
hs = &hw->hsync_b;
|
|
|
|
|
hb = &hw->hblank_b;
|
|
|
|
|
ht = &hw->htotal_b;
|
|
|
|
|
vs = &hw->vsync_b;
|
|
|
|
|
vb = &hw->vblank_b;
|
|
|
|
|
vt = &hw->vtotal_b;
|
|
|
|
|
ss = &hw->src_size_b;
|
|
|
|
|
pipe_conf = &hw->pipe_b_conf;
|
|
|
|
|
} else {
|
|
|
|
|
dpll = &hw->dpll_a;
|
|
|
|
|
fp0 = &hw->fpa0;
|
|
|
|
|
fp1 = &hw->fpa1;
|
|
|
|
|
hs = &hw->hsync_a;
|
|
|
|
|
hb = &hw->hblank_a;
|
|
|
|
|
ht = &hw->htotal_a;
|
|
|
|
|
vs = &hw->vsync_a;
|
|
|
|
|
vb = &hw->vblank_a;
|
|
|
|
|
vt = &hw->vtotal_a;
|
|
|
|
|
ss = &hw->src_size_a;
|
|
|
|
|
pipe_conf = &hw->pipe_a_conf;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Use ADPA register for sync control. */
|
|
|
|
|
hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
|
|
|
|
|
|
|
|
|
|
/* sync polarity */
|
|
|
|
|
hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
|
|
|
|
|
ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
|
|
|
|
|
vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
|
|
|
|
|
ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
|
|
|
|
|
hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
|
|
|
|
|
(ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
|
|
|
|
|
hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
|
|
|
|
|
(vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
|
|
|
|
|
|
|
|
|
|
/* Connect correct pipe to the analog port DAC */
|
|
|
|
|
hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
|
|
|
|
|
hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
|
|
|
|
|
|
|
|
|
|
/* Set DPMS state to D0 (on) */
|
|
|
|
|
hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
|
|
|
|
|
hw->adpa |= ADPA_DPMS_D0;
|
|
|
|
|
|
|
|
|
|
hw->adpa |= ADPA_DAC_ENABLE;
|
|
|
|
|
|
|
|
|
|
*dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
|
|
|
|
|
*dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
|
|
|
|
|
*dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
|
|
|
|
|
|
|
|
|
|
/* Desired clock in kHz */
|
|
|
|
|
clock_target = 1000000000 / var->pixclock;
|
|
|
|
|
|
2006-03-31 09:08:52 +02:00
|
|
|
|
if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
|
2006-03-23 09:23:48 +01:00
|
|
|
|
&n, &p1, &p2, &clock)) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
WRN_MSG("calc_pll_params failed\n");
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Check for overflow. */
|
|
|
|
|
if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
|
|
|
|
|
return 1;
|
|
|
|
|
if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
|
|
|
|
|
return 1;
|
|
|
|
|
if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
|
|
|
|
|
return 1;
|
|
|
|
|
if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
|
|
|
|
|
return 1;
|
|
|
|
|
if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
|
|
*dpll &= ~DPLL_P1_FORCE_DIV2;
|
|
|
|
|
*dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
|
|
|
|
|
(DPLL_P1_MASK << DPLL_P1_SHIFT));
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
|
|
|
|
if (IS_I9XX(dinfo)) {
|
|
|
|
|
*dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
|
|
|
|
|
*dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
|
|
|
|
|
} else {
|
|
|
|
|
*dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
|
|
|
|
|
}
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
*fp0 = (n << FP_N_DIVISOR_SHIFT) |
|
|
|
|
|
(m1 << FP_M1_DIVISOR_SHIFT) |
|
|
|
|
|
(m2 << FP_M2_DIVISOR_SHIFT);
|
|
|
|
|
*fp1 = *fp0;
|
|
|
|
|
|
|
|
|
|
hw->dvob &= ~PORT_ENABLE;
|
|
|
|
|
hw->dvoc &= ~PORT_ENABLE;
|
|
|
|
|
|
|
|
|
|
/* Use display plane A. */
|
|
|
|
|
hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
|
|
|
|
|
hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
|
|
|
|
|
switch (intelfb_var_to_depth(var)) {
|
|
|
|
|
case 8:
|
|
|
|
|
hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
|
|
|
|
|
break;
|
|
|
|
|
case 15:
|
|
|
|
|
hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
|
|
|
|
|
break;
|
|
|
|
|
case 16:
|
|
|
|
|
hw->disp_a_ctrl |= DISPPLANE_16BPP;
|
|
|
|
|
break;
|
|
|
|
|
case 24:
|
|
|
|
|
hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
|
|
|
|
|
hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
|
|
|
|
|
|
|
|
|
|
/* Set CRTC registers. */
|
|
|
|
|
hactive = var->xres;
|
|
|
|
|
hsync_start = hactive + var->right_margin;
|
|
|
|
|
hsync_end = hsync_start + var->hsync_len;
|
|
|
|
|
htotal = hsync_end + var->left_margin;
|
|
|
|
|
hblank_start = hactive;
|
|
|
|
|
hblank_end = htotal;
|
|
|
|
|
|
|
|
|
|
DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
|
|
|
|
|
hactive, hsync_start, hsync_end, htotal, hblank_start,
|
|
|
|
|
hblank_end);
|
|
|
|
|
|
|
|
|
|
vactive = var->yres;
|
|
|
|
|
vsync_start = vactive + var->lower_margin;
|
|
|
|
|
vsync_end = vsync_start + var->vsync_len;
|
|
|
|
|
vtotal = vsync_end + var->upper_margin;
|
|
|
|
|
vblank_start = vactive;
|
|
|
|
|
vblank_end = vtotal;
|
|
|
|
|
vblank_end = vsync_end + 1;
|
|
|
|
|
|
|
|
|
|
DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
|
|
|
|
|
vactive, vsync_start, vsync_end, vtotal, vblank_start,
|
|
|
|
|
vblank_end);
|
|
|
|
|
|
|
|
|
|
/* Adjust for register values, and check for overflow. */
|
|
|
|
|
hactive--;
|
|
|
|
|
if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
|
|
|
|
|
return 1;
|
|
|
|
|
hsync_start--;
|
|
|
|
|
if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
|
|
|
|
|
return 1;
|
|
|
|
|
hsync_end--;
|
|
|
|
|
if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
|
|
|
|
|
return 1;
|
|
|
|
|
htotal--;
|
|
|
|
|
if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
|
|
|
|
|
return 1;
|
|
|
|
|
hblank_start--;
|
|
|
|
|
if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
|
|
|
|
|
return 1;
|
|
|
|
|
hblank_end--;
|
|
|
|
|
if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
|
|
vactive--;
|
|
|
|
|
if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
|
|
|
|
|
return 1;
|
|
|
|
|
vsync_start--;
|
|
|
|
|
if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
|
|
|
|
|
return 1;
|
|
|
|
|
vsync_end--;
|
|
|
|
|
if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
|
|
|
|
|
return 1;
|
|
|
|
|
vtotal--;
|
|
|
|
|
if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
|
|
|
|
|
return 1;
|
|
|
|
|
vblank_start--;
|
|
|
|
|
if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
|
|
|
|
|
return 1;
|
|
|
|
|
vblank_end--;
|
|
|
|
|
if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
|
|
*ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
|
|
|
|
|
*hb = (hblank_start << HBLANKSTART_SHIFT) |
|
|
|
|
|
(hblank_end << HSYNCEND_SHIFT);
|
|
|
|
|
*hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
|
|
|
|
|
|
|
|
|
|
*vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
|
|
|
|
|
*vb = (vblank_start << VBLANKSTART_SHIFT) |
|
|
|
|
|
(vblank_end << VSYNCEND_SHIFT);
|
|
|
|
|
*vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
|
|
|
|
|
*ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
|
|
|
|
|
(vactive << SRC_SIZE_VERT_SHIFT);
|
|
|
|
|
|
2006-04-03 06:46:55 +02:00
|
|
|
|
hw->disp_a_stride = dinfo->pitch;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
DBG_MSG("pitch is %d\n", hw->disp_a_stride);
|
|
|
|
|
|
|
|
|
|
hw->disp_a_base = hw->disp_a_stride * var->yoffset +
|
|
|
|
|
var->xoffset * var->bits_per_pixel / 8;
|
|
|
|
|
|
|
|
|
|
hw->disp_a_base += dinfo->fb.offset << 12;
|
|
|
|
|
|
|
|
|
|
/* Check stride alignment. */
|
2006-05-27 10:17:52 +02:00
|
|
|
|
stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
|
|
|
|
|
STRIDE_ALIGNMENT;
|
|
|
|
|
if (hw->disp_a_stride % stride_alignment != 0) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
WRN_MSG("display stride %d has bad alignment %d\n",
|
2006-05-27 10:17:52 +02:00
|
|
|
|
hw->disp_a_stride, stride_alignment);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Set the palette to 8-bit mode. */
|
|
|
|
|
*pipe_conf &= ~PIPECONF_GAMMA;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Program a (non-VGA) video mode. */
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_program_mode(struct intelfb_info *dinfo,
|
|
|
|
|
const struct intelfb_hwstate *hw, int blank)
|
|
|
|
|
{
|
|
|
|
|
int pipe = PIPE_A;
|
|
|
|
|
u32 tmp;
|
|
|
|
|
const u32 *dpll, *fp0, *fp1, *pipe_conf;
|
|
|
|
|
const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
|
|
|
|
|
u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg;
|
|
|
|
|
u32 hsync_reg, htotal_reg, hblank_reg;
|
|
|
|
|
u32 vsync_reg, vtotal_reg, vblank_reg;
|
|
|
|
|
u32 src_size_reg;
|
2006-03-23 02:30:05 +01:00
|
|
|
|
u32 count, tmp_val[3];
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
/* Assume single pipe, display plane A, analog CRT. */
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_program_mode\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Disable VGA */
|
|
|
|
|
tmp = INREG(VGACNTRL);
|
|
|
|
|
tmp |= VGA_DISABLE;
|
|
|
|
|
OUTREG(VGACNTRL, tmp);
|
|
|
|
|
|
|
|
|
|
/* Check whether pipe A or pipe B is enabled. */
|
|
|
|
|
if (hw->pipe_a_conf & PIPECONF_ENABLE)
|
|
|
|
|
pipe = PIPE_A;
|
|
|
|
|
else if (hw->pipe_b_conf & PIPECONF_ENABLE)
|
|
|
|
|
pipe = PIPE_B;
|
|
|
|
|
|
|
|
|
|
dinfo->pipe = pipe;
|
|
|
|
|
|
|
|
|
|
if (pipe == PIPE_B) {
|
|
|
|
|
dpll = &hw->dpll_b;
|
|
|
|
|
fp0 = &hw->fpb0;
|
|
|
|
|
fp1 = &hw->fpb1;
|
|
|
|
|
pipe_conf = &hw->pipe_b_conf;
|
|
|
|
|
hs = &hw->hsync_b;
|
|
|
|
|
hb = &hw->hblank_b;
|
|
|
|
|
ht = &hw->htotal_b;
|
|
|
|
|
vs = &hw->vsync_b;
|
|
|
|
|
vb = &hw->vblank_b;
|
|
|
|
|
vt = &hw->vtotal_b;
|
|
|
|
|
ss = &hw->src_size_b;
|
|
|
|
|
dpll_reg = DPLL_B;
|
|
|
|
|
fp0_reg = FPB0;
|
|
|
|
|
fp1_reg = FPB1;
|
|
|
|
|
pipe_conf_reg = PIPEBCONF;
|
|
|
|
|
hsync_reg = HSYNC_B;
|
|
|
|
|
htotal_reg = HTOTAL_B;
|
|
|
|
|
hblank_reg = HBLANK_B;
|
|
|
|
|
vsync_reg = VSYNC_B;
|
|
|
|
|
vtotal_reg = VTOTAL_B;
|
|
|
|
|
vblank_reg = VBLANK_B;
|
|
|
|
|
src_size_reg = SRC_SIZE_B;
|
|
|
|
|
} else {
|
|
|
|
|
dpll = &hw->dpll_a;
|
|
|
|
|
fp0 = &hw->fpa0;
|
|
|
|
|
fp1 = &hw->fpa1;
|
|
|
|
|
pipe_conf = &hw->pipe_a_conf;
|
|
|
|
|
hs = &hw->hsync_a;
|
|
|
|
|
hb = &hw->hblank_a;
|
|
|
|
|
ht = &hw->htotal_a;
|
|
|
|
|
vs = &hw->vsync_a;
|
|
|
|
|
vb = &hw->vblank_a;
|
|
|
|
|
vt = &hw->vtotal_a;
|
|
|
|
|
ss = &hw->src_size_a;
|
|
|
|
|
dpll_reg = DPLL_A;
|
|
|
|
|
fp0_reg = FPA0;
|
|
|
|
|
fp1_reg = FPA1;
|
|
|
|
|
pipe_conf_reg = PIPEACONF;
|
|
|
|
|
hsync_reg = HSYNC_A;
|
|
|
|
|
htotal_reg = HTOTAL_A;
|
|
|
|
|
hblank_reg = HBLANK_A;
|
|
|
|
|
vsync_reg = VSYNC_A;
|
|
|
|
|
vtotal_reg = VTOTAL_A;
|
|
|
|
|
vblank_reg = VBLANK_A;
|
|
|
|
|
src_size_reg = SRC_SIZE_A;
|
|
|
|
|
}
|
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
/* turn off pipe */
|
|
|
|
|
tmp = INREG(pipe_conf_reg);
|
|
|
|
|
tmp &= ~PIPECONF_ENABLE;
|
|
|
|
|
OUTREG(pipe_conf_reg, tmp);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
count = 0;
|
2006-03-23 09:23:48 +01:00
|
|
|
|
do {
|
2006-03-31 09:08:52 +02:00
|
|
|
|
tmp_val[count%3] = INREG(0x70000);
|
|
|
|
|
if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1]==tmp_val[2]))
|
|
|
|
|
break;
|
|
|
|
|
count++;
|
|
|
|
|
udelay(1);
|
|
|
|
|
if (count % 200 == 0) {
|
|
|
|
|
tmp = INREG(pipe_conf_reg);
|
|
|
|
|
tmp &= ~PIPECONF_ENABLE;
|
|
|
|
|
OUTREG(pipe_conf_reg, tmp);
|
|
|
|
|
}
|
2006-03-23 02:30:05 +01:00
|
|
|
|
} while(count < 2000);
|
|
|
|
|
|
|
|
|
|
OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
/* Disable planes A and B. */
|
|
|
|
|
tmp = INREG(DSPACNTR);
|
|
|
|
|
tmp &= ~DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
OUTREG(DSPACNTR, tmp);
|
|
|
|
|
tmp = INREG(DSPBCNTR);
|
|
|
|
|
tmp &= ~DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
OUTREG(DSPBCNTR, tmp);
|
|
|
|
|
|
2006-03-31 09:08:52 +02:00
|
|
|
|
/* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
|
2005-04-17 00:20:36 +02:00
|
|
|
|
mdelay(20);
|
|
|
|
|
|
2006-05-27 10:56:02 +02:00
|
|
|
|
OUTREG(DVOB, INREG(DVOB) & ~PORT_ENABLE);
|
|
|
|
|
OUTREG(DVOC, INREG(DVOC) & ~PORT_ENABLE);
|
|
|
|
|
OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
/* Disable Sync */
|
|
|
|
|
tmp = INREG(ADPA);
|
|
|
|
|
tmp &= ~ADPA_DPMS_CONTROL_MASK;
|
|
|
|
|
tmp |= ADPA_DPMS_D3;
|
|
|
|
|
OUTREG(ADPA, tmp);
|
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
/* do some funky magic - xyzzy */
|
|
|
|
|
OUTREG(0x61204, 0xabcd0000);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
/* turn off PLL */
|
|
|
|
|
tmp = INREG(dpll_reg);
|
2007-09-19 07:46:34 +02:00
|
|
|
|
tmp &= ~DPLL_VCO_ENABLE;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
OUTREG(dpll_reg, tmp);
|
|
|
|
|
|
|
|
|
|
/* Set PLL parameters */
|
|
|
|
|
OUTREG(fp0_reg, *fp0);
|
|
|
|
|
OUTREG(fp1_reg, *fp1);
|
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
/* Enable PLL */
|
2006-05-27 10:56:02 +02:00
|
|
|
|
OUTREG(dpll_reg, *dpll);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
/* Set DVOs B/C */
|
|
|
|
|
OUTREG(DVOB, hw->dvob);
|
|
|
|
|
OUTREG(DVOC, hw->dvoc);
|
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
/* undo funky magic */
|
|
|
|
|
OUTREG(0x61204, 0x00000000);
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
/* Set ADPA */
|
2006-03-23 02:30:05 +01:00
|
|
|
|
OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
|
|
|
|
|
|
2006-03-23 02:30:05 +01:00
|
|
|
|
/* Set pipe parameters */
|
|
|
|
|
OUTREG(hsync_reg, *hs);
|
|
|
|
|
OUTREG(hblank_reg, *hb);
|
|
|
|
|
OUTREG(htotal_reg, *ht);
|
|
|
|
|
OUTREG(vsync_reg, *vs);
|
|
|
|
|
OUTREG(vblank_reg, *vb);
|
|
|
|
|
OUTREG(vtotal_reg, *vt);
|
|
|
|
|
OUTREG(src_size_reg, *ss);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
|
|
|
|
|
/* Enable pipe */
|
|
|
|
|
OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
|
|
|
|
|
|
|
|
|
|
/* Enable sync */
|
|
|
|
|
tmp = INREG(ADPA);
|
|
|
|
|
tmp &= ~ADPA_DPMS_CONTROL_MASK;
|
|
|
|
|
tmp |= ADPA_DPMS_D0;
|
|
|
|
|
OUTREG(ADPA, tmp);
|
|
|
|
|
|
|
|
|
|
/* setup display plane */
|
|
|
|
|
if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
|
|
|
|
|
/*
|
|
|
|
|
* i830M errata: the display plane must be enabled
|
|
|
|
|
* to allow writes to the other bits in the plane
|
|
|
|
|
* control register.
|
|
|
|
|
*/
|
|
|
|
|
tmp = INREG(DSPACNTR);
|
|
|
|
|
if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
|
|
|
|
|
tmp |= DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
OUTREG(DSPACNTR, tmp);
|
|
|
|
|
OUTREG(DSPACNTR,
|
|
|
|
|
hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
|
|
|
|
|
mdelay(1);
|
2006-03-31 09:08:52 +02:00
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
|
|
|
|
|
OUTREG(DSPASTRIDE, hw->disp_a_stride);
|
|
|
|
|
OUTREG(DSPABASE, hw->disp_a_base);
|
|
|
|
|
|
|
|
|
|
/* Enable plane */
|
|
|
|
|
if (!blank) {
|
|
|
|
|
tmp = INREG(DSPACNTR);
|
|
|
|
|
tmp |= DISPPLANE_PLANE_ENABLE;
|
|
|
|
|
OUTREG(DSPACNTR, tmp);
|
|
|
|
|
OUTREG(DSPABASE, hw->disp_a_base);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* forward declarations */
|
|
|
|
|
static void refresh_ring(struct intelfb_info *dinfo);
|
|
|
|
|
static void reset_state(struct intelfb_info *dinfo);
|
|
|
|
|
static void do_flush(struct intelfb_info *dinfo);
|
|
|
|
|
|
2007-05-08 09:37:25 +02:00
|
|
|
|
static u32 get_ring_space(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
u32 ring_space;
|
|
|
|
|
|
|
|
|
|
if (dinfo->ring_tail >= dinfo->ring_head)
|
|
|
|
|
ring_space = dinfo->ring.size -
|
|
|
|
|
(dinfo->ring_tail - dinfo->ring_head);
|
|
|
|
|
else
|
|
|
|
|
ring_space = dinfo->ring_head - dinfo->ring_tail;
|
|
|
|
|
|
|
|
|
|
if (ring_space > RING_MIN_FREE)
|
|
|
|
|
ring_space -= RING_MIN_FREE;
|
|
|
|
|
else
|
|
|
|
|
ring_space = 0;
|
|
|
|
|
|
|
|
|
|
return ring_space;
|
|
|
|
|
}
|
|
|
|
|
|
2005-04-17 00:20:36 +02:00
|
|
|
|
static int
|
|
|
|
|
wait_ring(struct intelfb_info *dinfo, int n)
|
|
|
|
|
{
|
|
|
|
|
int i = 0;
|
|
|
|
|
unsigned long end;
|
|
|
|
|
u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("wait_ring: %d\n", n);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
end = jiffies + (HZ * 3);
|
|
|
|
|
while (dinfo->ring_space < n) {
|
2006-06-23 07:05:39 +02:00
|
|
|
|
dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
|
2007-05-08 09:37:25 +02:00
|
|
|
|
dinfo->ring_space = get_ring_space(dinfo);
|
|
|
|
|
|
2006-06-23 07:05:39 +02:00
|
|
|
|
if (dinfo->ring_head != last_head) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
end = jiffies + (HZ * 3);
|
2006-06-23 07:05:39 +02:00
|
|
|
|
last_head = dinfo->ring_head;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
i++;
|
|
|
|
|
if (time_before(end, jiffies)) {
|
|
|
|
|
if (!i) {
|
|
|
|
|
/* Try again */
|
|
|
|
|
reset_state(dinfo);
|
|
|
|
|
refresh_ring(dinfo);
|
|
|
|
|
do_flush(dinfo);
|
|
|
|
|
end = jiffies + (HZ * 3);
|
|
|
|
|
i = 1;
|
|
|
|
|
} else {
|
|
|
|
|
WRN_MSG("ring buffer : space: %d wanted %d\n",
|
|
|
|
|
dinfo->ring_space, n);
|
|
|
|
|
WRN_MSG("lockup - turning off hardware "
|
|
|
|
|
"acceleration\n");
|
|
|
|
|
dinfo->ring_lockup = 1;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
udelay(1);
|
|
|
|
|
}
|
|
|
|
|
return i;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
do_flush(struct intelfb_info *dinfo) {
|
|
|
|
|
START_RING(2);
|
|
|
|
|
OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
|
|
|
|
|
OUT_RING(MI_NOOP);
|
|
|
|
|
ADVANCE_RING();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_do_sync(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_do_sync\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!dinfo->accel)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Send a flush, then wait until the ring is empty. This is what
|
|
|
|
|
* the XFree86 driver does, and actually it doesn't seem a lot worse
|
|
|
|
|
* than the recommended method (both have problems).
|
|
|
|
|
*/
|
|
|
|
|
do_flush(dinfo);
|
|
|
|
|
wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
|
|
|
|
|
dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
refresh_ring(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("refresh_ring\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
2006-06-23 07:05:39 +02:00
|
|
|
|
dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
|
2005-04-17 00:20:36 +02:00
|
|
|
|
dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
|
2007-05-08 09:37:25 +02:00
|
|
|
|
dinfo->ring_space = get_ring_space(dinfo);
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
reset_state(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("reset_state\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < FENCE_NUM; i++)
|
|
|
|
|
OUTREG(FENCE + (i << 2), 0);
|
|
|
|
|
|
|
|
|
|
/* Flush the ring buffer if it's enabled. */
|
|
|
|
|
tmp = INREG(PRI_RING_LENGTH);
|
|
|
|
|
if (tmp & RING_ENABLE) {
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("reset_state: ring was enabled\n");
|
|
|
|
|
#endif
|
|
|
|
|
refresh_ring(dinfo);
|
|
|
|
|
intelfbhw_do_sync(dinfo);
|
|
|
|
|
DO_RING_IDLE();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OUTREG(PRI_RING_LENGTH, 0);
|
|
|
|
|
OUTREG(PRI_RING_HEAD, 0);
|
|
|
|
|
OUTREG(PRI_RING_TAIL, 0);
|
|
|
|
|
OUTREG(PRI_RING_START, 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Stop the 2D engine, and turn off the ring buffer. */
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_2d_stop(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n", dinfo->accel,
|
|
|
|
|
dinfo->ring_active);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!dinfo->accel)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
dinfo->ring_active = 0;
|
|
|
|
|
reset_state(dinfo);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Enable the ring buffer, and initialise the 2D engine.
|
|
|
|
|
* It is assumed that the graphics engine has been stopped by previously
|
|
|
|
|
* calling intelfb_2d_stop().
|
|
|
|
|
*/
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_2d_start(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
|
|
|
|
|
dinfo->accel, dinfo->ring_active);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!dinfo->accel)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/* Initialise the primary ring buffer. */
|
|
|
|
|
OUTREG(PRI_RING_LENGTH, 0);
|
|
|
|
|
OUTREG(PRI_RING_TAIL, 0);
|
|
|
|
|
OUTREG(PRI_RING_HEAD, 0);
|
|
|
|
|
|
|
|
|
|
OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
|
|
|
|
|
OUTREG(PRI_RING_LENGTH,
|
|
|
|
|
((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
|
|
|
|
|
RING_NO_REPORT | RING_ENABLE);
|
|
|
|
|
refresh_ring(dinfo);
|
|
|
|
|
dinfo->ring_active = 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* 2D fillrect (solid fill or invert) */
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w, u32 h,
|
|
|
|
|
u32 color, u32 pitch, u32 bpp, u32 rop)
|
|
|
|
|
{
|
|
|
|
|
u32 br00, br09, br13, br14, br16;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
|
|
|
|
|
"rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
br00 = COLOR_BLT_CMD;
|
|
|
|
|
br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
|
|
|
|
|
br13 = (rop << ROP_SHIFT) | pitch;
|
|
|
|
|
br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
|
|
|
|
|
br16 = color;
|
|
|
|
|
|
|
|
|
|
switch (bpp) {
|
|
|
|
|
case 8:
|
|
|
|
|
br13 |= COLOR_DEPTH_8;
|
|
|
|
|
break;
|
|
|
|
|
case 16:
|
|
|
|
|
br13 |= COLOR_DEPTH_16;
|
|
|
|
|
break;
|
|
|
|
|
case 32:
|
|
|
|
|
br13 |= COLOR_DEPTH_32;
|
|
|
|
|
br00 |= WRITE_ALPHA | WRITE_RGB;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
START_RING(6);
|
|
|
|
|
OUT_RING(br00);
|
|
|
|
|
OUT_RING(br13);
|
|
|
|
|
OUT_RING(br14);
|
|
|
|
|
OUT_RING(br09);
|
|
|
|
|
OUT_RING(br16);
|
|
|
|
|
OUT_RING(MI_NOOP);
|
|
|
|
|
ADVANCE_RING();
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
|
|
|
|
|
dinfo->ring_tail, dinfo->ring_space);
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
|
|
|
|
|
u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
|
|
|
|
|
{
|
|
|
|
|
u32 br00, br09, br11, br12, br13, br22, br23, br26;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
|
|
|
|
|
curx, cury, dstx, dsty, w, h, pitch, bpp);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
br00 = XY_SRC_COPY_BLT_CMD;
|
|
|
|
|
br09 = dinfo->fb_start;
|
|
|
|
|
br11 = (pitch << PITCH_SHIFT);
|
|
|
|
|
br12 = dinfo->fb_start;
|
|
|
|
|
br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
|
|
|
|
|
br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
|
|
|
|
|
br23 = ((dstx + w) << WIDTH_SHIFT) |
|
|
|
|
|
((dsty + h) << HEIGHT_SHIFT);
|
|
|
|
|
br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
|
|
|
|
|
|
|
|
|
|
switch (bpp) {
|
|
|
|
|
case 8:
|
|
|
|
|
br13 |= COLOR_DEPTH_8;
|
|
|
|
|
break;
|
|
|
|
|
case 16:
|
|
|
|
|
br13 |= COLOR_DEPTH_16;
|
|
|
|
|
break;
|
|
|
|
|
case 32:
|
|
|
|
|
br13 |= COLOR_DEPTH_32;
|
|
|
|
|
br00 |= WRITE_ALPHA | WRITE_RGB;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
START_RING(8);
|
|
|
|
|
OUT_RING(br00);
|
|
|
|
|
OUT_RING(br13);
|
|
|
|
|
OUT_RING(br22);
|
|
|
|
|
OUT_RING(br23);
|
|
|
|
|
OUT_RING(br09);
|
|
|
|
|
OUT_RING(br26);
|
|
|
|
|
OUT_RING(br11);
|
|
|
|
|
OUT_RING(br12);
|
|
|
|
|
ADVANCE_RING();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
|
|
|
|
|
u32 h, const u8* cdat, u32 x, u32 y, u32 pitch, u32 bpp)
|
|
|
|
|
{
|
|
|
|
|
int nbytes, ndwords, pad, tmp;
|
|
|
|
|
u32 br00, br09, br13, br18, br19, br22, br23;
|
|
|
|
|
int dat, ix, iy, iw;
|
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* size in bytes of a padded scanline */
|
|
|
|
|
nbytes = ROUND_UP_TO(w, 16) / 8;
|
|
|
|
|
|
|
|
|
|
/* Total bytes of padded scanline data to write out. */
|
|
|
|
|
nbytes = nbytes * h;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Check if the glyph data exceeds the immediate mode limit.
|
|
|
|
|
* It would take a large font (1K pixels) to hit this limit.
|
|
|
|
|
*/
|
|
|
|
|
if (nbytes > MAX_MONO_IMM_SIZE)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
/* Src data is packaged a dword (32-bit) at a time. */
|
|
|
|
|
ndwords = ROUND_UP_TO(nbytes, 4) / 4;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Ring has to be padded to a quad word. But because the command starts
|
|
|
|
|
with 7 bytes, pad only if there is an even number of ndwords
|
|
|
|
|
*/
|
|
|
|
|
pad = !(ndwords % 2);
|
|
|
|
|
|
|
|
|
|
tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
|
|
|
|
|
br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
|
|
|
|
|
br09 = dinfo->fb_start;
|
|
|
|
|
br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
|
|
|
|
|
br18 = bg;
|
|
|
|
|
br19 = fg;
|
|
|
|
|
br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
|
|
|
|
|
br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
|
|
|
|
|
|
|
|
|
|
switch (bpp) {
|
|
|
|
|
case 8:
|
|
|
|
|
br13 |= COLOR_DEPTH_8;
|
|
|
|
|
break;
|
|
|
|
|
case 16:
|
|
|
|
|
br13 |= COLOR_DEPTH_16;
|
|
|
|
|
break;
|
|
|
|
|
case 32:
|
|
|
|
|
br13 |= COLOR_DEPTH_32;
|
|
|
|
|
br00 |= WRITE_ALPHA | WRITE_RGB;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
START_RING(8 + ndwords);
|
|
|
|
|
OUT_RING(br00);
|
|
|
|
|
OUT_RING(br13);
|
|
|
|
|
OUT_RING(br22);
|
|
|
|
|
OUT_RING(br23);
|
|
|
|
|
OUT_RING(br09);
|
|
|
|
|
OUT_RING(br18);
|
|
|
|
|
OUT_RING(br19);
|
|
|
|
|
ix = iy = 0;
|
|
|
|
|
iw = ROUND_UP_TO(w, 8) / 8;
|
|
|
|
|
while (ndwords--) {
|
|
|
|
|
dat = 0;
|
|
|
|
|
for (j = 0; j < 2; ++j) {
|
|
|
|
|
for (i = 0; i < 2; ++i) {
|
|
|
|
|
if (ix != iw || i == 0)
|
|
|
|
|
dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
|
|
|
|
|
}
|
|
|
|
|
if (ix == iw && iy != (h-1)) {
|
|
|
|
|
ix = 0;
|
|
|
|
|
++iy;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
OUT_RING(dat);
|
|
|
|
|
}
|
|
|
|
|
if (pad)
|
|
|
|
|
OUT_RING(MI_NOOP);
|
|
|
|
|
ADVANCE_RING();
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* HW cursor functions. */
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_init(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_init\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
2006-03-31 09:08:52 +02:00
|
|
|
|
if (dinfo->mobile || IS_I9XX(dinfo)) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
if (!dinfo->cursor.physical)
|
|
|
|
|
return;
|
|
|
|
|
tmp = INREG(CURSOR_A_CONTROL);
|
|
|
|
|
tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
|
|
|
|
|
CURSOR_MEM_TYPE_LOCAL |
|
|
|
|
|
(1 << CURSOR_PIPE_SELECT_SHIFT));
|
|
|
|
|
tmp |= CURSOR_MODE_DISABLE;
|
|
|
|
|
OUTREG(CURSOR_A_CONTROL, tmp);
|
|
|
|
|
OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
|
|
|
|
|
} else {
|
|
|
|
|
tmp = INREG(CURSOR_CONTROL);
|
|
|
|
|
tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
|
|
|
|
|
CURSOR_ENABLE | CURSOR_STRIDE_MASK);
|
|
|
|
|
tmp = CURSOR_FORMAT_3C;
|
|
|
|
|
OUTREG(CURSOR_CONTROL, tmp);
|
|
|
|
|
OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
|
|
|
|
|
tmp = (64 << CURSOR_SIZE_H_SHIFT) |
|
|
|
|
|
(64 << CURSOR_SIZE_V_SHIFT);
|
|
|
|
|
OUTREG(CURSOR_SIZE, tmp);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_hide(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_hide\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
dinfo->cursor_on = 0;
|
2006-03-31 09:08:52 +02:00
|
|
|
|
if (dinfo->mobile || IS_I9XX(dinfo)) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
if (!dinfo->cursor.physical)
|
|
|
|
|
return;
|
|
|
|
|
tmp = INREG(CURSOR_A_CONTROL);
|
|
|
|
|
tmp &= ~CURSOR_MODE_MASK;
|
|
|
|
|
tmp |= CURSOR_MODE_DISABLE;
|
|
|
|
|
OUTREG(CURSOR_A_CONTROL, tmp);
|
|
|
|
|
/* Flush changes */
|
|
|
|
|
OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
|
|
|
|
|
} else {
|
|
|
|
|
tmp = INREG(CURSOR_CONTROL);
|
|
|
|
|
tmp &= ~CURSOR_ENABLE;
|
|
|
|
|
OUTREG(CURSOR_CONTROL, tmp);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_show(struct intelfb_info *dinfo)
|
|
|
|
|
{
|
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_show\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
dinfo->cursor_on = 1;
|
|
|
|
|
|
|
|
|
|
if (dinfo->cursor_blanked)
|
|
|
|
|
return;
|
|
|
|
|
|
2006-03-31 09:08:52 +02:00
|
|
|
|
if (dinfo->mobile || IS_I9XX(dinfo)) {
|
2005-04-17 00:20:36 +02:00
|
|
|
|
if (!dinfo->cursor.physical)
|
|
|
|
|
return;
|
|
|
|
|
tmp = INREG(CURSOR_A_CONTROL);
|
|
|
|
|
tmp &= ~CURSOR_MODE_MASK;
|
|
|
|
|
tmp |= CURSOR_MODE_64_4C_AX;
|
|
|
|
|
OUTREG(CURSOR_A_CONTROL, tmp);
|
|
|
|
|
/* Flush changes */
|
|
|
|
|
OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
|
|
|
|
|
} else {
|
|
|
|
|
tmp = INREG(CURSOR_CONTROL);
|
|
|
|
|
tmp |= CURSOR_ENABLE;
|
|
|
|
|
OUTREG(CURSOR_CONTROL, tmp);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
|
|
|
|
|
{
|
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
2006-03-31 09:08:52 +02:00
|
|
|
|
* Sets the position. The coordinates are assumed to already
|
|
|
|
|
* have any offset adjusted. Assume that the cursor is never
|
2005-04-17 00:20:36 +02:00
|
|
|
|
* completely off-screen, and that x, y are always >= 0.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
|
|
|
|
|
((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
|
|
|
|
|
OUTREG(CURSOR_A_POSITION, tmp);
|
2006-03-23 03:06:32 +01:00
|
|
|
|
|
2006-03-31 09:08:52 +02:00
|
|
|
|
if (IS_I9XX(dinfo)) {
|
2006-03-23 03:06:32 +01:00
|
|
|
|
OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
|
|
|
|
|
}
|
2005-04-17 00:20:36 +02:00
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
|
|
|
|
|
{
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_setcolor\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
|
|
|
|
|
OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
|
|
|
|
|
OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
|
|
|
|
|
OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
|
|
|
|
|
u8 *data)
|
|
|
|
|
{
|
|
|
|
|
u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
|
|
|
|
|
int i, j, w = width / 8;
|
|
|
|
|
int mod = width % 8, t_mask, d_mask;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_load\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!dinfo->cursor.virtual)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
t_mask = 0xff >> mod;
|
|
|
|
|
d_mask = ~(0xff >> mod);
|
|
|
|
|
for (i = height; i--; ) {
|
|
|
|
|
for (j = 0; j < w; j++) {
|
|
|
|
|
writeb(0x00, addr + j);
|
|
|
|
|
writeb(*(data++), addr + j+8);
|
|
|
|
|
}
|
|
|
|
|
if (mod) {
|
|
|
|
|
writeb(t_mask, addr + j);
|
|
|
|
|
writeb(*(data++) & d_mask, addr + j+8);
|
|
|
|
|
}
|
|
|
|
|
addr += 16;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_cursor_reset(struct intelfb_info *dinfo) {
|
|
|
|
|
u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
|
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
|
|
#if VERBOSE > 0
|
|
|
|
|
DBG_MSG("intelfbhw_cursor_reset\n");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (!dinfo->cursor.virtual)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
for (i = 64; i--; ) {
|
|
|
|
|
for (j = 0; j < 8; j++) {
|
|
|
|
|
writeb(0xff, addr + j+0);
|
|
|
|
|
writeb(0x00, addr + j+8);
|
|
|
|
|
}
|
|
|
|
|
addr += 16;
|
|
|
|
|
}
|
|
|
|
|
}
|
2006-06-20 20:36:41 +02:00
|
|
|
|
|
|
|
|
|
static irqreturn_t
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:55:46 +02:00
|
|
|
|
intelfbhw_irq(int irq, void *dev_id) {
|
2006-06-20 20:36:41 +02:00
|
|
|
|
int handled = 0;
|
|
|
|
|
u16 tmp;
|
|
|
|
|
struct intelfb_info *dinfo = (struct intelfb_info *)dev_id;
|
|
|
|
|
|
|
|
|
|
spin_lock(&dinfo->int_lock);
|
|
|
|
|
|
|
|
|
|
tmp = INREG16(IIR);
|
|
|
|
|
tmp &= VSYNC_PIPE_A_INTERRUPT;
|
|
|
|
|
|
|
|
|
|
if (tmp == 0) {
|
|
|
|
|
spin_unlock(&dinfo->int_lock);
|
|
|
|
|
return IRQ_RETVAL(handled);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OUTREG16(IIR, tmp);
|
|
|
|
|
|
|
|
|
|
if (tmp & VSYNC_PIPE_A_INTERRUPT) {
|
|
|
|
|
dinfo->vsync.count++;
|
2006-06-20 20:36:42 +02:00
|
|
|
|
if (dinfo->vsync.pan_display) {
|
|
|
|
|
dinfo->vsync.pan_display = 0;
|
|
|
|
|
OUTREG(DSPABASE, dinfo->vsync.pan_offset);
|
|
|
|
|
}
|
2006-06-20 20:36:41 +02:00
|
|
|
|
wake_up_interruptible(&dinfo->vsync.wait);
|
|
|
|
|
handled = 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
spin_unlock(&dinfo->int_lock);
|
|
|
|
|
|
|
|
|
|
return IRQ_RETVAL(handled);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_enable_irq(struct intelfb_info *dinfo, int reenable) {
|
|
|
|
|
|
|
|
|
|
if (!test_and_set_bit(0, &dinfo->irq_flags)) {
|
2007-02-14 09:33:16 +01:00
|
|
|
|
if (request_irq(dinfo->pdev->irq, intelfbhw_irq, IRQF_SHARED,
|
|
|
|
|
"intelfb", dinfo)) {
|
2006-06-20 20:36:41 +02:00
|
|
|
|
clear_bit(0, &dinfo->irq_flags);
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
spin_lock_irq(&dinfo->int_lock);
|
|
|
|
|
OUTREG16(HWSTAM, 0xfffe);
|
|
|
|
|
OUTREG16(IMR, 0x0);
|
|
|
|
|
OUTREG16(IER, VSYNC_PIPE_A_INTERRUPT);
|
|
|
|
|
spin_unlock_irq(&dinfo->int_lock);
|
|
|
|
|
} else if (reenable) {
|
|
|
|
|
u16 ier;
|
|
|
|
|
|
|
|
|
|
spin_lock_irq(&dinfo->int_lock);
|
|
|
|
|
ier = INREG16(IER);
|
|
|
|
|
if ((ier & VSYNC_PIPE_A_INTERRUPT)) {
|
|
|
|
|
DBG_MSG("someone disabled the IRQ [%08X]\n", ier);
|
|
|
|
|
OUTREG(IER, VSYNC_PIPE_A_INTERRUPT);
|
|
|
|
|
}
|
|
|
|
|
spin_unlock_irq(&dinfo->int_lock);
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
intelfbhw_disable_irq(struct intelfb_info *dinfo) {
|
|
|
|
|
u16 tmp;
|
|
|
|
|
|
|
|
|
|
if (test_and_clear_bit(0, &dinfo->irq_flags)) {
|
2006-06-20 20:36:42 +02:00
|
|
|
|
if (dinfo->vsync.pan_display) {
|
|
|
|
|
dinfo->vsync.pan_display = 0;
|
|
|
|
|
OUTREG(DSPABASE, dinfo->vsync.pan_offset);
|
|
|
|
|
}
|
2006-06-20 20:36:41 +02:00
|
|
|
|
spin_lock_irq(&dinfo->int_lock);
|
|
|
|
|
OUTREG16(HWSTAM, 0xffff);
|
|
|
|
|
OUTREG16(IMR, 0xffff);
|
|
|
|
|
OUTREG16(IER, 0x0);
|
|
|
|
|
|
|
|
|
|
tmp = INREG16(IIR);
|
|
|
|
|
OUTREG16(IIR, tmp);
|
|
|
|
|
spin_unlock_irq(&dinfo->int_lock);
|
|
|
|
|
|
|
|
|
|
free_irq(dinfo->pdev->irq, dinfo);
|
|
|
|
|
}
|
|
|
|
|
}
|
2006-06-20 20:36:42 +02:00
|
|
|
|
|
|
|
|
|
int
|
|
|
|
|
intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe) {
|
|
|
|
|
struct intelfb_vsync *vsync;
|
|
|
|
|
unsigned int count;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
switch (pipe) {
|
|
|
|
|
case 0:
|
|
|
|
|
vsync = &dinfo->vsync;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
return -ENODEV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ret = intelfbhw_enable_irq(dinfo, 0);
|
|
|
|
|
if (ret) {
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
count = vsync->count;
|
|
|
|
|
ret = wait_event_interruptible_timeout(vsync->wait, count != vsync->count, HZ/10);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
if (ret == 0) {
|
|
|
|
|
intelfbhw_enable_irq(dinfo, 1);
|
|
|
|
|
DBG_MSG("wait_for_vsync timed out!\n");
|
|
|
|
|
return -ETIMEDOUT;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|