2008-01-23 00:00:02 +01:00
|
|
|
/*
|
|
|
|
ads7828.c - lm_sensors driver for ads7828 12-bit 8-channel ADC
|
|
|
|
(C) 2007 EADS Astrium
|
|
|
|
|
|
|
|
This driver is based on the lm75 and other lm_sensors/hwmon drivers
|
|
|
|
|
|
|
|
Written by Steve Hardy <steve@linuxrealtime.co.uk>
|
|
|
|
|
|
|
|
Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program; if not, write to the Free Software
|
|
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/hwmon.h>
|
|
|
|
#include <linux/hwmon-sysfs.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
|
|
|
|
/* The ADS7828 registers */
|
|
|
|
#define ADS7828_NCH 8 /* 8 channels of 12-bit A-D supported */
|
|
|
|
#define ADS7828_CMD_SD_SE 0x80 /* Single ended inputs */
|
|
|
|
#define ADS7828_CMD_SD_DIFF 0x00 /* Differential inputs */
|
|
|
|
#define ADS7828_CMD_PD0 0x0 /* Power Down between A-D conversions */
|
|
|
|
#define ADS7828_CMD_PD1 0x04 /* Internal ref OFF && A-D ON */
|
|
|
|
#define ADS7828_CMD_PD2 0x08 /* Internal ref ON && A-D OFF */
|
|
|
|
#define ADS7828_CMD_PD3 0x0C /* Internal ref ON && A-D ON */
|
|
|
|
#define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */
|
|
|
|
|
|
|
|
/* Addresses to scan */
|
2008-02-18 04:28:03 +01:00
|
|
|
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
|
2008-01-23 00:00:02 +01:00
|
|
|
I2C_CLIENT_END };
|
|
|
|
|
|
|
|
/* Insmod parameters */
|
|
|
|
I2C_CLIENT_INSMOD_1(ads7828);
|
|
|
|
|
|
|
|
/* Other module parameters */
|
|
|
|
static int se_input = 1; /* Default is SE, 0 == diff */
|
|
|
|
static int int_vref = 1; /* Default is internal ref ON */
|
|
|
|
static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */
|
|
|
|
module_param(se_input, bool, S_IRUGO);
|
|
|
|
module_param(int_vref, bool, S_IRUGO);
|
|
|
|
module_param(vref_mv, int, S_IRUGO);
|
|
|
|
|
|
|
|
/* Global Variables */
|
|
|
|
static u8 ads7828_cmd_byte; /* cmd byte without channel bits */
|
|
|
|
static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */
|
|
|
|
|
|
|
|
/* Each client has this additional data */
|
|
|
|
struct ads7828_data {
|
|
|
|
struct i2c_client client;
|
|
|
|
struct device *hwmon_dev;
|
|
|
|
struct mutex update_lock; /* mutex protect updates */
|
|
|
|
char valid; /* !=0 if following fields are valid */
|
|
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
u16 adc_input[ADS7828_NCH]; /* ADS7828_NCH 12-bit samples */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Function declaration - necessary due to function dependencies */
|
|
|
|
static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind);
|
|
|
|
|
|
|
|
/* The ADS7828 returns the 12-bit sample in two bytes,
|
|
|
|
these are read as a word then byte-swapped */
|
|
|
|
static u16 ads7828_read_value(struct i2c_client *client, u8 reg)
|
|
|
|
{
|
|
|
|
return swab16(i2c_smbus_read_word_data(client, reg));
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u8 channel_cmd_byte(int ch)
|
|
|
|
{
|
|
|
|
/* cmd byte C2,C1,C0 - see datasheet */
|
|
|
|
u8 cmd = (((ch>>1) | (ch&0x01)<<2)<<4);
|
|
|
|
cmd |= ads7828_cmd_byte;
|
|
|
|
return cmd;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update data for the device (all 8 channels) */
|
|
|
|
static struct ads7828_data *ads7828_update_device(struct device *dev)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct ads7828_data *data = i2c_get_clientdata(client);
|
|
|
|
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|
|
|| !data->valid) {
|
|
|
|
unsigned int ch;
|
|
|
|
dev_dbg(&client->dev, "Starting ads7828 update\n");
|
|
|
|
|
|
|
|
for (ch = 0; ch < ADS7828_NCH; ch++) {
|
|
|
|
u8 cmd = channel_cmd_byte(ch);
|
|
|
|
data->adc_input[ch] = ads7828_read_value(client, cmd);
|
|
|
|
}
|
|
|
|
data->last_updated = jiffies;
|
|
|
|
data->valid = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
|
|
|
|
return data;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* sysfs callback function */
|
|
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *da,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
|
|
struct ads7828_data *data = ads7828_update_device(dev);
|
|
|
|
/* Print value (in mV as specified in sysfs-interface documentation) */
|
|
|
|
return sprintf(buf, "%d\n", (data->adc_input[attr->index] *
|
|
|
|
ads7828_lsb_resol)/1000);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define in_reg(offset)\
|
|
|
|
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in,\
|
|
|
|
NULL, offset)
|
|
|
|
|
|
|
|
in_reg(0);
|
|
|
|
in_reg(1);
|
|
|
|
in_reg(2);
|
|
|
|
in_reg(3);
|
|
|
|
in_reg(4);
|
|
|
|
in_reg(5);
|
|
|
|
in_reg(6);
|
|
|
|
in_reg(7);
|
|
|
|
|
|
|
|
static struct attribute *ads7828_attributes[] = {
|
|
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in7_input.dev_attr.attr,
|
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct attribute_group ads7828_group = {
|
|
|
|
.attrs = ads7828_attributes,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int ads7828_attach_adapter(struct i2c_adapter *adapter)
|
|
|
|
{
|
|
|
|
if (!(adapter->class & I2C_CLASS_HWMON))
|
|
|
|
return 0;
|
|
|
|
return i2c_probe(adapter, &addr_data, ads7828_detect);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ads7828_detach_client(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct ads7828_data *data = i2c_get_clientdata(client);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &ads7828_group);
|
|
|
|
i2c_detach_client(client);
|
|
|
|
kfree(i2c_get_clientdata(client));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This is the driver that will be inserted */
|
|
|
|
static struct i2c_driver ads7828_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "ads7828",
|
|
|
|
},
|
|
|
|
.attach_adapter = ads7828_attach_adapter,
|
|
|
|
.detach_client = ads7828_detach_client,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* This function is called by i2c_probe */
|
|
|
|
static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
|
|
{
|
|
|
|
struct i2c_client *client;
|
|
|
|
struct ads7828_data *data;
|
|
|
|
int err = 0;
|
|
|
|
const char *name = "";
|
|
|
|
|
|
|
|
/* Check we have a valid client */
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
/* OK. For now, we presume we have a valid client. We now create the
|
|
|
|
client structure, even though we cannot fill it completely yet.
|
|
|
|
But it allows us to access ads7828_read_value. */
|
|
|
|
data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL);
|
|
|
|
if (!data) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
|
|
|
|
client = &data->client;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
|
|
client->addr = address;
|
|
|
|
client->adapter = adapter;
|
|
|
|
client->driver = &ads7828_driver;
|
|
|
|
|
|
|
|
/* Now, we do the remaining detection. There is no identification
|
|
|
|
dedicated register so attempt to sanity check using knowledge of
|
|
|
|
the chip
|
|
|
|
- Read from the 8 channel addresses
|
|
|
|
- Check the top 4 bits of each result are not set (12 data bits)
|
|
|
|
*/
|
|
|
|
if (kind < 0) {
|
|
|
|
int ch;
|
|
|
|
for (ch = 0; ch < ADS7828_NCH; ch++) {
|
|
|
|
u16 in_data;
|
|
|
|
u8 cmd = channel_cmd_byte(ch);
|
|
|
|
in_data = ads7828_read_value(client, cmd);
|
|
|
|
if (in_data & 0xF000) {
|
|
|
|
printk(KERN_DEBUG
|
|
|
|
"%s : Doesn't look like an ads7828 device\n",
|
2008-04-30 09:54:57 +02:00
|
|
|
__func__);
|
2008-01-23 00:00:02 +01:00
|
|
|
goto exit_free;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Determine the chip type - only one kind supported! */
|
|
|
|
if (kind <= 0)
|
|
|
|
kind = ads7828;
|
|
|
|
|
|
|
|
if (kind == ads7828)
|
|
|
|
name = "ads7828";
|
|
|
|
|
|
|
|
/* Fill in the remaining client fields, put it into the global list */
|
|
|
|
strlcpy(client->name, name, I2C_NAME_SIZE);
|
|
|
|
|
|
|
|
mutex_init(&data->update_lock);
|
|
|
|
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
|
|
err = i2c_attach_client(client);
|
|
|
|
if (err)
|
|
|
|
goto exit_free;
|
|
|
|
|
|
|
|
/* Register sysfs hooks */
|
|
|
|
err = sysfs_create_group(&client->dev.kobj, &ads7828_group);
|
|
|
|
if (err)
|
|
|
|
goto exit_detach;
|
|
|
|
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
|
|
goto exit_remove;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
exit_remove:
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &ads7828_group);
|
|
|
|
exit_detach:
|
|
|
|
i2c_detach_client(client);
|
|
|
|
exit_free:
|
|
|
|
kfree(data);
|
|
|
|
exit:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init sensors_ads7828_init(void)
|
|
|
|
{
|
|
|
|
/* Initialize the command byte according to module parameters */
|
|
|
|
ads7828_cmd_byte = se_input ?
|
|
|
|
ADS7828_CMD_SD_SE : ADS7828_CMD_SD_DIFF;
|
|
|
|
ads7828_cmd_byte |= int_vref ?
|
|
|
|
ADS7828_CMD_PD3 : ADS7828_CMD_PD1;
|
|
|
|
|
|
|
|
/* Calculate the LSB resolution */
|
|
|
|
ads7828_lsb_resol = (vref_mv*1000)/4096;
|
|
|
|
|
|
|
|
return i2c_add_driver(&ads7828_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit sensors_ads7828_exit(void)
|
|
|
|
{
|
|
|
|
i2c_del_driver(&ads7828_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Steve Hardy <steve@linuxrealtime.co.uk>");
|
|
|
|
MODULE_DESCRIPTION("ADS7828 driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
module_init(sensors_ads7828_init);
|
|
|
|
module_exit(sensors_ads7828_exit);
|