bnx2x: Fix 54618se LED behavior

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Yaniv Rosner 2011-10-27 05:09:48 +00:00 committed by David S. Miller
parent ce7c048928
commit 001cea77b9

View file

@ -5994,7 +5994,13 @@ int bnx2x_set_led(struct link_params *params,
SHARED_HW_CFG_LED_MAC1);
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE));
if (params->phy[EXT_PHY1].type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE)
EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp & 0xfff1);
else {
EMAC_WR(bp, EMAC_REG_EMAC_LED,
(tmp | EMAC_LED_OVERRIDE));
}
break;
case LED_MODE_OPER:
@ -6047,8 +6053,15 @@ int bnx2x_set_led(struct link_params *params,
else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
hw_led_mode);
} else if ((params->phy[EXT_PHY1].type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) &&
(mode != LED_MODE_OPER)) {
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED, tmp | 0x3);
} else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
hw_led_mode);
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
/* Set blinking rate to ~15.9Hz */
@ -6060,8 +6073,13 @@ int bnx2x_set_led(struct link_params *params,
LED_BLINK_RATE_VAL_E1X_E2);
REG_WR(bp, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 +
port*4, 1);
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp & (~EMAC_LED_OVERRIDE)));
if ((params->phy[EXT_PHY1].type !=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE) &&
(mode != LED_MODE_OPER)) {
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED,
(tmp & (~EMAC_LED_OVERRIDE)));
}
if (CHIP_IS_E1(bp) &&
((speed == SPEED_2500) ||
@ -10309,22 +10327,6 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
return 0;
}
static void bnx2x_54618se_set_link_led(struct bnx2x_phy *phy,
struct link_params *params, u8 mode)
{
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "54618SE set link led (mode=%x)\n", mode);
switch (mode) {
case LED_MODE_FRONT_PANEL_OFF:
case LED_MODE_OFF:
case LED_MODE_OPER:
case LED_MODE_ON:
default:
break;
}
return;
}
static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
struct link_params *params)
{
@ -11101,7 +11103,7 @@ static struct bnx2x_phy phy_54618se = {
.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
.set_link_led = (set_link_led_t)bnx2x_54618se_set_link_led,
.set_link_led = (set_link_led_t)NULL,
.phy_specific_func = (phy_specific_func_t)NULL
};
/*****************************************************************/