USB: dummy-hcd: fix power budget for SuperSpeed mode

commit 2636d49b64671d3d90ecc4daf971b58df3956519 upstream.

The power budget for SuperSpeed mode should be 900 mA
according to USB specification, so set the power budget
to 900mA for dummy_start_ss which is only used for
SuperSpeed mode.

If the max power consumption of SuperSpeed device is
larger than 500 mA, insufficient available bus power
error happens in usb_choose_configuration function
when the device connects to dummy hcd.

Signed-off-by: Jacky Cao <Jacky.Cao@sony.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/16EA1F625E922C43B00B9D82250220500871CDE5@APYOKXMS108.ap.sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Jacky.Cao@sony.com 2019-09-05 04:11:57 +00:00 committed by Greg Kroah-Hartman
parent ab8d87d14d
commit 3b089cef3c

View file

@ -48,6 +48,7 @@
#define DRIVER_VERSION "02 May 2005"
#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
#define POWER_BUDGET_3 900 /* in mA */
static const char driver_name[] = "dummy_hcd";
static const char driver_desc[] = "USB Host+Gadget Emulator";
@ -2446,7 +2447,7 @@ static int dummy_start_ss(struct dummy_hcd *dum_hcd)
dum_hcd->rh_state = DUMMY_RH_RUNNING;
dum_hcd->stream_en_ep = 0;
INIT_LIST_HEAD(&dum_hcd->urbp_list);
dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET;
dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
#ifdef CONFIG_USB_OTG