x86: unify ack_apic_edge

use code in 64 to replace
	move_native_irq(irq, desc);
in 32 bit

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Yinghai Lu 2008-08-19 20:50:48 -07:00 committed by Ingo Molnar
parent 4e738e2f30
commit 3eb2cce84b

View file

@ -389,7 +389,6 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned
writel(value, &io_apic->data);
}
#ifdef CONFIG_X86_64
static bool io_apic_level_ack_pending(unsigned int irq)
{
struct irq_pin_list *entry;
@ -419,7 +418,6 @@ static bool io_apic_level_ack_pending(unsigned int irq)
return false;
}
#endif
union entry_union {
struct { u32 w1, w2; };
@ -2398,9 +2396,16 @@ static void ack_apic_edge(unsigned int irq)
ack_APIC_irq();
}
#ifdef CONFIG_X86_64
#ifdef CONFIG_X86_32
atomic_t irq_mis_count;
#endif
static void ack_apic_level(unsigned int irq)
{
#ifdef CONFIG_X86_32
unsigned long v;
int i;
#endif
int do_unmask_irq = 0;
irq_complete_move(irq);
@ -2412,6 +2417,31 @@ static void ack_apic_level(unsigned int irq)
}
#endif
#ifdef CONFIG_X86_32
/*
* It appears there is an erratum which affects at least version 0x11
* of I/O APIC (that's the 82093AA and cores integrated into various
* chipsets). Under certain conditions a level-triggered interrupt is
* erroneously delivered as edge-triggered one but the respective IRR
* bit gets set nevertheless. As a result the I/O unit expects an EOI
* message but it will never arrive and further interrupts are blocked
* from the source. The exact reason is so far unknown, but the
* phenomenon was observed when two consecutive interrupt requests
* from a given source get delivered to the same CPU and the source is
* temporarily disabled in between.
*
* A workaround is to simulate an EOI message manually. We achieve it
* by setting the trigger mode to edge and then to level when the edge
* trigger mode gets detected in the TMR of a local APIC for a
* level-triggered interrupt. We mask the source for the time of the
* operation to prevent an edge-triggered interrupt escaping meanwhile.
* The idea is from Manfred Spraul. --macro
*/
i = irq_cfg(irq)->vector;
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
#endif
/*
* We must acknowledge the irq before we move it or the acknowledge will
* not propagate properly.
@ -2450,41 +2480,8 @@ static void ack_apic_level(unsigned int irq)
move_masked_irq(irq);
unmask_IO_APIC_irq(irq);
}
}
#else
atomic_t irq_mis_count;
static void ack_apic_level(unsigned int irq)
{
unsigned long v;
int i;
irq_complete_move(irq);
move_native_irq(irq);
/*
* It appears there is an erratum which affects at least version 0x11
* of I/O APIC (that's the 82093AA and cores integrated into various
* chipsets). Under certain conditions a level-triggered interrupt is
* erroneously delivered as edge-triggered one but the respective IRR
* bit gets set nevertheless. As a result the I/O unit expects an EOI
* message but it will never arrive and further interrupts are blocked
* from the source. The exact reason is so far unknown, but the
* phenomenon was observed when two consecutive interrupt requests
* from a given source get delivered to the same CPU and the source is
* temporarily disabled in between.
*
* A workaround is to simulate an EOI message manually. We achieve it
* by setting the trigger mode to edge and then to level when the edge
* trigger mode gets detected in the TMR of a local APIC for a
* level-triggered interrupt. We mask the source for the time of the
* operation to prevent an edge-triggered interrupt escaping meanwhile.
* The idea is from Manfred Spraul. --macro
*/
i = irq_cfg(irq)->vector;
v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
ack_APIC_irq();
#ifdef CONFIG_X86_32
if (!(v & (1 << (i & 0x1f)))) {
atomic_inc(&irq_mis_count);
spin_lock(&ioapic_lock);
@ -2492,8 +2489,8 @@ static void ack_apic_level(unsigned int irq)
__unmask_and_level_IO_APIC_irq(irq);
spin_unlock(&ioapic_lock);
}
}
#endif
}
static struct irq_chip ioapic_chip __read_mostly = {
.name = "IO-APIC",