V4L/DVB (8455): gspca_sonixb sn9c103 + ov7630 autoexposure and cleanup

Andoni Zubimendi has been doing some testing with his sn9c103 cam with
ov7630 sensor, and with this patch the exposure setting and autoexposure now
work.

This patch also removes some special cases in the shared ov6650 / ov7630 code
which now are handled the same for both sensors and it adds a new special case
which stops us from changing the hsync / vsync polarity settings from their
default on the ov7630 (which we were doing as a side-effect of using the ov6650
exposure code for the ov7630).

Last this patch removes the superficial difference between the OV7630 and
OV7630_3 sensors.

Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Hans de Goede 2008-07-22 07:09:33 -03:00 committed by Mauro Carvalho Chehab
parent c5e0bd1a98
commit 6af492e566

View file

@ -41,6 +41,7 @@ struct sd {
unsigned char brightness;
unsigned char autogain;
unsigned char autogain_ignore_frames;
unsigned char frames_to_drop;
unsigned char freq; /* light freq filter setting */
unsigned char saturation;
unsigned char hue;
@ -51,13 +52,13 @@ struct sd {
#define SENSOR_HV7131R 0
#define SENSOR_OV6650 1
#define SENSOR_OV7630 2
#define SENSOR_OV7630_3 3
#define SENSOR_PAS106 4
#define SENSOR_PAS202 5
#define SENSOR_TAS5110 6
#define SENSOR_TAS5130CXX 7
#define SENSOR_PAS106 3
#define SENSOR_PAS202 4
#define SENSOR_TAS5110 5
#define SENSOR_TAS5130CXX 6
char sensor_has_gain;
__u8 sensor_addr;
__u8 reg11;
};
#define COMP2 0x8f
@ -318,7 +319,7 @@ static const __u8 initOv7630_3[] = {
0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, 0x80, /* r21 .. r28 */
0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff /* r29 .. r30 */
};
static const __u8 ov7630_sensor_init_com[][8] = {
static const __u8 ov7630_sensor_init[][8] = {
{0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10},
{0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10},
/* {0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10}, jfm */
@ -339,17 +340,6 @@ static const __u8 ov7630_sensor_init_com[][8] = {
{0xa0, 0x21, 0x7d, 0xf7, 0x8e, 0x00, 0x30, 0x10},
{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
};
static const __u8 ov7630_sensor_init[][8] = {
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 200ms */
{0xa0, 0x21, 0x11, 0x01, 0xbd, 0x06, 0xf6, 0x10}, /* jfm */
{0xa0, 0x21, 0x10, 0x57, 0xbd, 0x06, 0xf6, 0x16},
{0xa0, 0x21, 0x76, 0x02, 0xbd, 0x06, 0xf6, 0x16},
{0xa0, 0x21, 0x00, 0x10, 0xbd, 0x06, 0xf6, 0x15}, /* gain */
};
static const __u8 ov7630_sensor_init_3[][8] = {
{0xa0, 0x21, 0x2a, 0xa0, 0x00, 0x00, 0x00, 0x10},
{0xa0, 0x21, 0x2a, 0x80, 0x00, 0x00, 0x00, 0x10},
};
static const __u8 initPas106[] = {
0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
@ -539,7 +529,6 @@ static void setbrightness(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
case SENSOR_OV6650:
case SENSOR_OV7630_3:
case SENSOR_OV7630: {
__u8 i2cOV[] =
{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
@ -632,7 +621,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
case SENSOR_OV6650:
gain >>= 1;
/* fall thru */
case SENSOR_OV7630_3: {
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
i2c[1] = sd->sensor_addr;
@ -687,7 +676,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
break;
}
case SENSOR_OV6650:
case SENSOR_OV7630_3: {
case SENSOR_OV7630: {
/* The ov6650 / ov7630 have 2 registers which both influence
exposure, register 11, whose low nibble sets the nr off fps
according to: fps = 30 / (low_nibble + 1)
@ -702,16 +691,20 @@ static void setexposure(struct gspca_dev *gspca_dev)
The code maps our 0 - 510 ms exposure ctrl to these 2
registers, trying to keep fps as high as possible.
*/
__u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0xc0, 0x00, 0x00, 0x10};
int reg10, reg11;
__u8 i2c[] = {0xb0, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10};
int reg10, reg11, reg10_max;
/* ov6645 datasheet says reg10_max is 9a, but that uses
tline * 2 * reg10 as formula for calculating texpo, the
ov6650 probably uses the same formula as the 7730 which uses
tline * 4 * reg10, which explains why the reg10max we've
found experimentally for the ov6650 is exactly half that of
the ov6645. The ov7630 datasheet says the max is 0x41. */
const int reg10_max = (sd->sensor == SENSOR_OV6650)
? 0x4d : 0x41;
if (sd->sensor == SENSOR_OV6650) {
reg10_max = 0x4d;
i2c[4] = 0xc0; /* OV6650 needs non default vsync pol */
} else
reg10_max = 0x41;
reg11 = (60 * sd->exposure + 999) / 1000;
if (reg11 < 1)
@ -732,20 +725,23 @@ static void setexposure(struct gspca_dev *gspca_dev)
else if (reg10 > reg10_max)
reg10 = reg10_max;
/* In 640x480, if the reg11 has less than 3, the image is
unstable (not enough bandwidth). */
if (gspca_dev->width == 640 && reg11 < 3)
reg11 = 3;
/* Write reg 10 and reg11 low nibble */
i2c[1] = sd->sensor_addr;
i2c[3] = reg10;
i2c[4] |= reg11 - 1;
if (sd->sensor == SENSOR_OV7630_3) {
__u8 reg76 = reg10 & 0x03;
__u8 i2c_reg76[] = {0xa0, 0x21, 0x76, 0x00,
0x00, 0x00, 0x00, 0x10};
reg10 >>= 2;
i2c_reg76[3] = reg76;
if (i2c_w(gspca_dev, i2c_reg76) < 0)
PDEBUG(D_ERR, "i2c error exposure");
}
if (i2c_w(gspca_dev, i2c) < 0)
/* If register 11 didn't change, don't change it */
if (sd->reg11 == reg11 )
i2c[0] = 0xa0;
if (i2c_w(gspca_dev, i2c) == 0)
sd->reg11 = reg11;
else
PDEBUG(D_ERR, "i2c error exposure");
break;
}
@ -758,11 +754,11 @@ static void setfreq(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
case SENSOR_OV6650:
case SENSOR_OV7630_3: {
case SENSOR_OV7630: {
/* Framerate adjust register for artificial light 50 hz flicker
compensation, identical to ov6630 0x2b register, see ov6630
datasheet.
0x4f -> (30 fps -> 25 fps), 0x00 -> no adjustment */
compensation, for the ov6650 this is identical to ov6630
0x2b register, see ov6630 datasheet.
0x4f / 0x8a -> (30 fps -> 25 fps), 0x00 -> no adjustment */
__u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10};
switch (sd->freq) {
default:
@ -789,7 +785,6 @@ static void setsaturation(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
/* case SENSOR_OV6650: */
case SENSOR_OV7630_3:
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10};
i2c[1] = sd->sensor_addr;
@ -810,7 +805,6 @@ static void sethue(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
/* case SENSOR_OV6650: */
case SENSOR_OV7630_3:
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 0x10};
i2c[1] = sd->sensor_addr;
@ -830,7 +824,6 @@ static void setcontrast(struct gspca_dev *gspca_dev)
switch (sd->sensor) {
/* case SENSOR_OV6650: */
case SENSOR_OV7630_3:
case SENSOR_OV7630: {
__u8 i2c[] = {0xa0, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x10};
i2c[1] = sd->sensor_addr;
@ -880,8 +873,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
sd->fr_h_sz = 12; /* default size of the frame header */
sd->sd_desc.nctrls = 2; /* default nb of ctrls */
sd->autogain = AUTOGAIN_DEF; /* default is autogain active */
product = id->idProduct;
/* switch (id->idVendor) { */
/* case 0x0c45: * Sonix */
@ -912,17 +903,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
case 0x6019: /* SN9C101 */
case 0x602c: /* SN9C102 */
case 0x602e: /* SN9C102 */
case 0x60b0: /* SN9C103 */
sd->sensor = SENSOR_OV7630;
sd->sensor_addr = 0x21;
break;
case 0x60b0: /* SN9C103 */
sd->sensor = SENSOR_OV7630_3;
sd->sensor_addr = 0x21;
sd->fr_h_sz = 18; /* size of frame header */
sd->sensor_has_gain = 1;
sd->sd_desc.nctrls = 8;
sd->sd_desc.nctrls = 5;
sd->sd_desc.dq_callback = do_autogain;
sd->autogain = 0;
if (product == 0x60b0)
sd->fr_h_sz = 18; /* size of frame header */
break;
case 0x6024: /* SN9C102 */
case 0x6025: /* SN9C102 */
@ -948,7 +936,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
if (!sif) {
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
if (sd->sensor == SENSOR_OV7630_3) {
if (product == 0x60b0) { /* SN9C103 with OV7630 */
/* We only have 320x240 & 640x480 */
cam->cam_mode++;
cam->nmodes--;
@ -960,12 +948,15 @@ static int sd_config(struct gspca_dev *gspca_dev,
sd->brightness = BRIGHTNESS_DEF;
sd->gain = GAIN_DEF;
sd->exposure = EXPOSURE_DEF;
sd->autogain = AUTOGAIN_DEF;
sd->freq = FREQ_DEF;
sd->contrast = CONTRAST_DEF;
sd->saturation = SATURATION_DEF;
sd->hue = HUE_DEF;
if (sd->sensor == SENSOR_OV7630_3) /* jfm: from win trace */
if (product == 0x60b0) /* SN9C103 with OV7630 */
reg_w(gspca_dev, 0x01, probe_ov7630, sizeof probe_ov7630);
return 0;
}
@ -999,7 +990,7 @@ static void pas106_i2cinit(struct gspca_dev *gspca_dev)
static void sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int mode, l;
int mode, l = 0x1f;
const __u8 *sn9c10x;
__u8 reg01, reg17;
__u8 reg17_19[3];
@ -1019,13 +1010,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
reg17_19[2] = 0x20;
break;
case SENSOR_OV7630:
sn9c10x = initOv7630;
reg17_19[0] = 0x68;
reg17_19[1] = (mode << 4) | COMP2;
reg17_19[2] = MCK_INIT1;
break;
case SENSOR_OV7630_3:
sn9c10x = initOv7630_3;
if (sd->fr_h_sz == 18) { /* SN9C103 */
sn9c10x = initOv7630_3;
l = sizeof initOv7630_3;
} else
sn9c10x = initOv7630;
reg17_19[0] = 0x68;
reg17_19[1] = (mode << 4) | COMP2;
reg17_19[2] = MCK_INIT1;
@ -1056,30 +1045,22 @@ static void sd_start(struct gspca_dev *gspca_dev)
reg17_19[2] = mode ? 0x23 : 0x43;
break;
}
switch (sd->sensor) {
case SENSOR_OV7630:
/* Special case for SN9C101/2 with OV 7630 */
/* HDG: is this really necessary we overwrite the values immediately
afterwards with the ones from the template ?? */
if (sd->sensor == SENSOR_OV7630 && sd->fr_h_sz == 12) {
reg01 = 0x06;
reg17 = 0x29;
l = sizeof initOv7630;
break;
case SENSOR_OV7630_3:
reg01 = 0x44;
reg17 = 0x68;
l = sizeof initOv7630_3;
break;
default:
} else {
reg01 = sn9c10x[0];
reg17 = sn9c10x[0x17 - 1];
l = 0x1f;
break;
}
/* reg 0x01 bit 2 video transfert on */
reg_w(gspca_dev, 0x01, &reg01, 1);
/* reg 0x17 SensorClk enable inv Clk 0x60 */
reg_w(gspca_dev, 0x17, &reg17, 1);
/*fixme: for ov7630 102
reg_w(gspca_dev, 0x01, {0x06, sn9c10x[1]}, 2); */
/* Set the registers from the template */
reg_w_big(gspca_dev, 0x01, sn9c10x, l);
switch (sd->sensor) {
@ -1092,17 +1073,13 @@ static void sd_start(struct gspca_dev *gspca_dev)
sizeof ov6650_sensor_init);
break;
case SENSOR_OV7630:
i2c_w_vector(gspca_dev, ov7630_sensor_init_com,
sizeof ov7630_sensor_init_com);
msleep(200);
i2c_w_vector(gspca_dev, ov7630_sensor_init,
sizeof ov7630_sensor_init);
break;
case SENSOR_OV7630_3:
i2c_w_vector(gspca_dev, ov7630_sensor_init_com,
sizeof ov7630_sensor_init_com);
msleep(200);
i2c_w(gspca_dev, ov7630_sensor_init_3[mode]);
if (sd->fr_h_sz == 18) { /* SN9C103 */
const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
0x00, 0x00, 0x10 };
i2c_w(gspca_dev, i2c);
}
break;
case SENSOR_PAS106:
pas106_i2cinit(gspca_dev);
@ -1142,6 +1119,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0x18, &reg17_19[1], 2);
msleep(20);
sd->reg11 = -1;
setgain(gspca_dev);
setbrightness(gspca_dev);
setexposure(gspca_dev);
@ -1150,6 +1129,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
sethue(gspca_dev);
setcontrast(gspca_dev);
sd->frames_to_drop = 0;
sd->autogain_ignore_frames = 0;
atomic_set(&sd->avg_lum, -1);
}
@ -1195,21 +1175,31 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
&& data[3 + i] == 0xc4
&& data[4 + i] == 0xc4
&& data[5 + i] == 0x96) { /* start of frame */
frame = gspca_frame_add(gspca_dev, LAST_PACKET,
frame, data, 0);
int lum = -1;
int pkt_type = LAST_PACKET;
if (len - i < sd->fr_h_sz) {
atomic_set(&sd->avg_lum, -1);
PDEBUG(D_STREAM, "packet too short to"
" get avg brightness");
} else if (sd->fr_h_sz == 12) {
atomic_set(&sd->avg_lum,
data[i + 8] +
(data[i + 9] << 8));
lum = data[i + 8] + (data[i + 9] << 8);
} else {
atomic_set(&sd->avg_lum,
data[i + 9] +
(data[i + 10] << 8));
lum = data[i + 9] +
(data[i + 10] << 8);
}
if (lum == 0) {
lum = -1;
sd->frames_to_drop = 2;
}
atomic_set(&sd->avg_lum, lum);
if (sd->frames_to_drop) {
sd->frames_to_drop--;
pkt_type = DISCARD_PACKET;
}
frame = gspca_frame_add(gspca_dev, pkt_type,
frame, data, 0);
data += i + sd->fr_h_sz;
len -= i + sd->fr_h_sz;
gspca_frame_add(gspca_dev, FIRST_PACKET,