MIPS: AR7: Make ar7_register_devices much more durable

[Ralf: Fixed up the rejects and changed all the new printk(KERN_...); to
pr_xxx() as suggested by Wu.]

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/920/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Alexander Clouter 2010-01-31 19:39:57 +00:00 committed by Ralf Baechle
parent 632b629c0c
commit 7084338eb8

View file

@ -529,115 +529,130 @@ static struct platform_device ar7_wdt = {
/*****************************************************************************
* Init
****************************************************************************/
static int __init ar7_register_devices(void)
static int __init ar7_register_uarts(void)
{
u16 chip_id;
int res;
u32 *bootcr, val;
#ifdef CONFIG_SERIAL_8250
static struct uart_port uart_port[2] __initdata;
static struct uart_port uart_port __initdata;
struct clk *bus_clk;
int res;
memset(uart_port, 0, sizeof(struct uart_port) * 2);
memset(&uart_port, 0, sizeof(struct uart_port));
bus_clk = clk_get(NULL, "bus");
if (IS_ERR(bus_clk))
panic("unable to get bus clk\n");
uart_port[0].type = PORT_16550A;
uart_port[0].line = 0;
uart_port[0].irq = AR7_IRQ_UART0;
uart_port[0].uartclk = clk_get_rate(bus_clk) / 2;
uart_port[0].iotype = UPIO_MEM32;
uart_port[0].mapbase = AR7_REGS_UART0;
uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
uart_port[0].regshift = 2;
res = early_serial_setup(&uart_port[0]);
uart_port.type = PORT_16550A;
uart_port.uartclk = clk_get_rate(bus_clk) / 2;
uart_port.iotype = UPIO_MEM32;
uart_port.regshift = 2;
uart_port.line = 0;
uart_port.irq = AR7_IRQ_UART0;
uart_port.mapbase = AR7_REGS_UART0;
uart_port.membase = ioremap(uart_port.mapbase, 256);
res = early_serial_setup(&uart_port);
if (res)
return res;
/* Only TNETD73xx have a second serial port */
if (ar7_has_second_uart()) {
uart_port[1].type = PORT_16550A;
uart_port[1].line = 1;
uart_port[1].irq = AR7_IRQ_UART1;
uart_port[1].uartclk = clk_get_rate(bus_clk) / 2;
uart_port[1].iotype = UPIO_MEM32;
uart_port[1].mapbase = UR8_REGS_UART1;
uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
uart_port[1].regshift = 2;
res = early_serial_setup(&uart_port[1]);
uart_port.line = 1;
uart_port.irq = AR7_IRQ_UART1;
uart_port.mapbase = UR8_REGS_UART1;
uart_port.membase = ioremap(uart_port.mapbase, 256);
res = early_serial_setup(&uart_port);
if (res)
return res;
}
#endif /* CONFIG_SERIAL_8250 */
#endif
return 0;
}
static int __init ar7_register_devices(void)
{
void __iomem *bootcr;
u32 val;
u16 chip_id;
int res;
res = ar7_register_uarts();
if (res)
pr_err("unable to setup uart(s): %d\n", res);
res = platform_device_register(&physmap_flash);
if (res)
return res;
pr_warning("unable to register physmap-flash: %d\n", res);
ar7_device_disable(vlynq_low_data.reset_bit);
res = platform_device_register(&vlynq_low);
if (res)
return res;
pr_warning("unable to register vlynq-low: %d\n", res);
if (ar7_has_high_vlynq()) {
ar7_device_disable(vlynq_high_data.reset_bit);
res = platform_device_register(&vlynq_high);
if (res)
return res;
pr_warning("unable to register vlynq-high: %d\n", res);
}
if (ar7_has_high_cpmac()) {
res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
if (res && res != -ENODEV)
return res;
cpmac_get_mac(1, cpmac_high_data.dev_addr);
res = platform_device_register(&cpmac_high);
if (res)
return res;
} else {
if (!res) {
cpmac_get_mac(1, cpmac_high_data.dev_addr);
res = platform_device_register(&cpmac_high);
if (res)
pr_warning("unable to register cpmac-high: %d\n", res);
} else
pr_warning("unable to add cpmac-high phy: %d\n", res);
} else
cpmac_low_data.phy_mask = 0xffffffff;
}
res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
if (res && res != -ENODEV)
return res;
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
if (res)
return res;
if (!res) {
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
if (res)
pr_warning("unable to register cpmac-low: %d\n", res);
} else
pr_warning("unable to add cpmac-low phy: %d\n", res);
detect_leds();
res = platform_device_register(&ar7_gpio_leds);
if (res)
return res;
pr_warning("unable to register leds: %d\n", res);
res = platform_device_register(&ar7_udc);
chip_id = ar7_chip_id();
switch (chip_id) {
case AR7_CHIP_7100:
case AR7_CHIP_7200:
ar7_wdt_res.start = AR7_REGS_WDT;
break;
case AR7_CHIP_7300:
ar7_wdt_res.start = UR8_REGS_WDT;
break;
default:
break;
}
ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
val = *bootcr;
iounmap(bootcr);
if (res)
pr_warning("unable to register usb slave: %d\n", res);
/* Register watchdog only if enabled in hardware */
if (val & AR7_WDT_HW_ENA)
res = platform_device_register(&ar7_wdt);
bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
val = readl(bootcr);
iounmap(bootcr);
if (val & AR7_WDT_HW_ENA) {
chip_id = ar7_chip_id();
switch (chip_id) {
case AR7_CHIP_7100:
case AR7_CHIP_7200:
ar7_wdt_res.start = AR7_REGS_WDT;
break;
case AR7_CHIP_7300:
ar7_wdt_res.start = UR8_REGS_WDT;
break;
default:
break;
}
return res;
ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
res = platform_device_register(&ar7_wdt);
if (res)
pr_warning("unable to register watchdog: %d\n", res);
}
return 0;
}
arch_initcall(ar7_register_devices);