ARM: S5PV210: move debug-macro.S into the common space

Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Tomasz Figa 2014-07-03 14:39:41 +02:00 committed by Kukjin Kim
parent 0a90d4d62c
commit 7bab7d9e11
2 changed files with 18 additions and 17 deletions

View file

@ -617,6 +617,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -627,6 +628,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -637,6 +639,7 @@ choice
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S3C24XX_UART if ARCH_S3C24XX
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -644,8 +647,9 @@ choice
by the boot-loader before use.
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
select DEBUG_EXYNOS_UART
depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
select DEBUG_S5PV210_UART if ARCH_S5PV210
bool "Use Samsung S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
@ -937,6 +941,9 @@ config DEBUG_S3C2410_UART
config DEBUG_S3C24XX_UART
bool
config DEBUG_S5PV210_UART
bool
config DEBUG_OMAP2PLUS_UART
bool
depends on ARCH_OMAP2PLUS
@ -997,6 +1004,7 @@ config DEBUG_LL_INCLUDE
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default "debug/sti.S" if DEBUG_STI_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART

View file

@ -1,9 +1,6 @@
/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -12,8 +9,9 @@
/* pull in the relevant register and map files. */
#include <linux/serial_s3c.h>
#include <mach/map.h>
#define S3C_ADDR_BASE 0xF6000000
#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000
#define S5PV210_PA_UART 0xe2900000
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
@ -22,8 +20,8 @@
*/
.macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
ldr \rp, =S5PV210_PA_UART
ldr \rv, =S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
@ -33,9 +31,4 @@
#define fifo_full fifo_full_s5pv210
#define fifo_level fifo_level_s5pv210
/* include the reset of the code which will do the work, we're only
* compiling for a single cpu processor type so the default of s3c2440
* will be fine with us.
*/
#include <debug/samsung.S>