ide-cd: remove needless zeroing of 'info' fields from ide_cdrom_setup()

ide_cd_probe() zeroes 'info' prior to calling ide_cdrom_setup() so there
is no need to explicitly zero 'info' fields in the latter function.

Ditto for fields of CDROM_STATE_FLAGS(), CDROM_CONFIG_FLAGS() and 'cdi'
(all are embedded in 'info').

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2008-02-01 23:09:19 +01:00
parent f17b0e02c0
commit b8d25dee3b

View file

@ -2865,30 +2865,16 @@ int ide_cdrom_setup (ide_drive_t *drive)
drive->special.all = 0;
CDROM_STATE_FLAGS(drive)->media_changed = 1;
CDROM_STATE_FLAGS(drive)->toc_valid = 0;
CDROM_STATE_FLAGS(drive)->door_locked = 0;
#if NO_DOOR_LOCKING
CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
#else
CDROM_CONFIG_FLAGS(drive)->no_doorlock = 0;
#endif
CDROM_CONFIG_FLAGS(drive)->drq_interrupt = ((drive->id->config & 0x0060) == 0x20);
CDROM_CONFIG_FLAGS(drive)->is_changer = 0;
CDROM_CONFIG_FLAGS(drive)->cd_r = 0;
CDROM_CONFIG_FLAGS(drive)->cd_rw = 0;
CDROM_CONFIG_FLAGS(drive)->test_write = 0;
CDROM_CONFIG_FLAGS(drive)->dvd = 0;
CDROM_CONFIG_FLAGS(drive)->dvd_r = 0;
CDROM_CONFIG_FLAGS(drive)->dvd_ram = 0;
if ((drive->id->config & 0x0060) == 0x20)
CDROM_CONFIG_FLAGS(drive)->drq_interrupt = 1;
CDROM_CONFIG_FLAGS(drive)->no_eject = 1;
CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 0;
CDROM_CONFIG_FLAGS(drive)->audio_play = 0;
CDROM_CONFIG_FLAGS(drive)->close_tray = 1;
/* limit transfer size per interrupt. */
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 0;
/* a testament to the nice quality of Samsung drives... */
if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2430"))
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
@ -2899,16 +2885,6 @@ int ide_cdrom_setup (ide_drive_t *drive)
CDROM_CONFIG_FLAGS(drive)->no_speed_select = 1;
#if ! STANDARD_ATAPI
/* by default Sanyo 3 CD changer support is turned off and
ATAPI Rev 2.2+ standard support for CD changers is used */
cdi->sanyo_slot = 0;
CDROM_CONFIG_FLAGS(drive)->nec260 = 0;
CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 0;
CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 0;
CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 0;
CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 0;
if (strcmp (drive->id->model, "V003S0DS") == 0 &&
drive->id->fw_rev[4] == '1' &&
drive->id->fw_rev[6] <= '2') {
@ -2942,8 +2918,10 @@ int ide_cdrom_setup (ide_drive_t *drive)
CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
}
/* Sanyo 3 CD changer uses a non-standard command
for CD changing */
/*
* Sanyo 3 CD changer uses a non-standard command for CD changing
* (by default standard ATAPI support for CD changers is used).
*/
else if ((strcmp(drive->id->model, "CD-ROM CDR-C3 G") == 0) ||
(strcmp(drive->id->model, "CD-ROM CDR-C3G") == 0) ||
(strcmp(drive->id->model, "CD-ROM CDR_C36") == 0)) {
@ -2952,14 +2930,6 @@ int ide_cdrom_setup (ide_drive_t *drive)
}
#endif /* not STANDARD_ATAPI */
info->toc = NULL;
info->buffer = NULL;
info->sector_buffered = 0;
info->nsectors_buffered = 0;
info->changer_info = NULL;
info->last_block = 0;
info->start_seek = 0;
nslots = ide_cdrom_probe_capabilities (drive);
/*