pdc2027x: Switch properly to ioread/iowrite

Some iomap functions were still using readl/writel and friends which
happens to work on most platforms but is not correct.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Alan Cox 2007-09-20 15:07:12 +01:00 committed by Jeff Garzik
parent c645fd3425
commit d2a84f4789

View file

@ -273,7 +273,7 @@ static int pdc2027x_cable_detect(struct ata_port *ap)
u32 cgcr;
/* check cable detect results */
cgcr = readl(port_mmio(ap, PDC_GLOBAL_CTL));
cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL));
if (cgcr & (1 << 26))
goto cbl40;
@ -291,7 +291,7 @@ cbl40:
*/
static inline int pdc2027x_port_enabled(struct ata_port *ap)
{
return readb(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
}
/**
@ -383,16 +383,16 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
/* Set the PIO timing registers using value table for 133MHz */
PDPRINTK("Set pio regs... \n");
ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0));
ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
ctcr0 &= 0xffff0000;
ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 |
(pdc2027x_pio_timing_tbl[pio].value1 << 8);
writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 &= 0x00ffffff;
ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24);
writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
PDPRINTK("Set pio regs done\n");
@ -426,18 +426,18 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* If tHOLD is '1', the hardware will add half clock for data hold time.
* This code segment seems to be no effect. tHOLD will be overwritten below.
*/
ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1));
writel(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
}
PDPRINTK("Set udma regs... \n");
ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 &= 0xff000000;
ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 |
(pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) |
(pdc2027x_udma_timing_tbl[udma_mode].value2 << 16);
writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
PDPRINTK("Set udma regs done\n");
@ -449,13 +449,13 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
unsigned int mdma_mode = dma_mode & 0x07;
PDPRINTK("Set mdma regs... \n");
ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0));
ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
ctcr0 &= 0x0000ffff;
ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) |
(pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24);
writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
PDPRINTK("Set mdma regs done\n");
PDPRINTK("Set to mdma mode[%u] \n", mdma_mode);
@ -492,9 +492,9 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed
* Enable prefetch if the device support PIO only.
*/
if (dev->xfer_shift == ATA_SHIFT_PIO) {
u32 ctcr1 = readl(dev_mmio(ap, dev, PDC_CTCR1));
u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
ctcr1 |= (1 << 25);
writel(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
PDPRINTK("Turn on prefetch\n");
} else {
@ -559,12 +559,12 @@ static long pdc_read_counter(struct ata_host *host)
u32 bccrl, bccrh, bccrlv, bccrhv;
retry:
bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
/* Read the counter values again for verification */
bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
counter = (bccrh << 15) | bccrl;
@ -613,7 +613,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
/* Show the current clock value of PLL control register
* (maybe already configured by the firmware)
*/
pll_ctl = readw(mmio_base + PDC_PLL_CTL);
pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
PDPRINTK("pll_ctl[%X]\n", pll_ctl);
#endif
@ -653,8 +653,8 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl);
writew(pll_ctl, mmio_base + PDC_PLL_CTL);
readw(mmio_base + PDC_PLL_CTL); /* flush */
iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL);
ioread16(mmio_base + PDC_PLL_CTL); /* flush */
/* Wait the PLL circuit to be stable */
mdelay(30);
@ -664,7 +664,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
* Show the current clock value of PLL control register
* (maybe configured by the firmware)
*/
pll_ctl = readw(mmio_base + PDC_PLL_CTL);
pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
PDPRINTK("pll_ctl[%X]\n", pll_ctl);
#endif
@ -687,10 +687,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
long pll_clock, usec_elapsed;
/* Start the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
scr = ioread32(mmio_base + PDC_SYS_CTL);
PDPRINTK("scr[%X]\n", scr);
writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
readl(mmio_base + PDC_SYS_CTL); /* flush */
iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
ioread32(mmio_base + PDC_SYS_CTL); /* flush */
/* Read current counter value */
start_count = pdc_read_counter(host);
@ -704,10 +704,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
do_gettimeofday(&end_time);
/* Stop the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
scr = ioread32(mmio_base + PDC_SYS_CTL);
PDPRINTK("scr[%X]\n", scr);
writel(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
readl(mmio_base + PDC_SYS_CTL); /* flush */
iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
ioread32(mmio_base + PDC_SYS_CTL); /* flush */
/* calculate the input clock in Hz */
usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +