diff --git a/Documentation/ABI/testing/sysfs-block-bcache b/Documentation/ABI/testing/sysfs-block-bcache new file mode 100644 index 000000000000..9e4bbc5d51fd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-bcache @@ -0,0 +1,156 @@ +What: /sys/block//bcache/unregister +Date: November 2010 +Contact: Kent Overstreet +Description: + A write to this file causes the backing device or cache to be + unregistered. If a backing device had dirty data in the cache, + writeback mode is automatically disabled and all dirty data is + flushed before the device is unregistered. Caches unregister + all associated backing devices before unregistering themselves. + +What: /sys/block//bcache/clear_stats +Date: November 2010 +Contact: Kent Overstreet +Description: + Writing to this file resets all the statistics for the device. + +What: /sys/block//bcache/cache +Date: November 2010 +Contact: Kent Overstreet +Description: + For a backing device that has cache, a symlink to + the bcache/ dir of that cache. + +What: /sys/block//bcache/cache_hits +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: integer number of full cache hits, + counted per bio. A partial cache hit counts as a miss. + +What: /sys/block//bcache/cache_misses +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: integer number of cache misses. + +What: /sys/block//bcache/cache_hit_ratio +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: cache hits as a percentage. + +What: /sys/block//bcache/sequential_cutoff +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: Threshold past which sequential IO will + skip the cache. Read and written as bytes in human readable + units (i.e. echo 10M > sequntial_cutoff). + +What: /sys/block//bcache/bypassed +Date: November 2010 +Contact: Kent Overstreet +Description: + Sum of all reads and writes that have bypassed the cache (due + to the sequential cutoff). Expressed as bytes in human + readable units. + +What: /sys/block//bcache/writeback +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: When on, writeback caching is enabled and + writes will be buffered in the cache. When off, caching is in + writethrough mode; reads and writes will be added to the + cache but no write buffering will take place. + +What: /sys/block//bcache/writeback_running +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: when off, dirty data will not be written + from the cache to the backing device. The cache will still be + used to buffer writes until it is mostly full, at which point + writes transparently revert to writethrough mode. Intended only + for benchmarking/testing. + +What: /sys/block//bcache/writeback_delay +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: In writeback mode, when dirty data is + written to the cache and the cache held no dirty data for that + backing device, writeback from cache to backing device starts + after this delay, expressed as an integer number of seconds. + +What: /sys/block//bcache/writeback_percent +Date: November 2010 +Contact: Kent Overstreet +Description: + For backing devices: If nonzero, writeback from cache to + backing device only takes place when more than this percentage + of the cache is used, allowing more write coalescing to take + place and reducing total number of writes sent to the backing + device. Integer between 0 and 40. + +What: /sys/block//bcache/synchronous +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, a boolean that allows synchronous mode to be + switched on and off. In synchronous mode all writes are ordered + such that the cache can reliably recover from unclean shutdown; + if disabled bcache will not generally wait for writes to + complete but if the cache is not shut down cleanly all data + will be discarded from the cache. Should not be turned off with + writeback caching enabled. + +What: /sys/block//bcache/discard +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, a boolean allowing discard/TRIM to be turned off + or back on if the device supports it. + +What: /sys/block//bcache/bucket_size +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, bucket size in human readable units, as set at + cache creation time; should match the erase block size of the + SSD for optimal performance. + +What: /sys/block//bcache/nbuckets +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, the number of usable buckets. + +What: /sys/block//bcache/tree_depth +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, height of the btree excluding leaf nodes (i.e. a + one node tree will have a depth of 0). + +What: /sys/block//bcache/btree_cache_size +Date: November 2010 +Contact: Kent Overstreet +Description: + Number of btree buckets/nodes that are currently cached in + memory; cache dynamically grows and shrinks in response to + memory pressure from the rest of the system. + +What: /sys/block//bcache/written +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, total amount of data in human readable units + written to the cache, excluding all metadata. + +What: /sys/block//bcache/btree_written +Date: November 2010 +Contact: Kent Overstreet +Description: + For a cache, sum of all btree writes in human readable units. diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index cd9213ccf3dc..0a306476424e 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -66,27 +66,7 @@ current_snap The current snapshot for which the device is mapped. -snap_* - - A directory per each snapshot - parent Information identifying the pool, image, and snapshot id for the parent image in a layered rbd image (format 2 only). - -Entries under /sys/bus/rbd/devices//snap_ -------------------------------------------------------------- - -snap_id - - The rados internal snapshot id assigned for this snapshot - -snap_size - - The size of the image when this snapshot was taken. - -snap_features - - A hexadecimal encoding of the feature bits for this snapshot. - diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index 938ef71e2035..3105644b3bfc 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -14,8 +14,7 @@ Description: The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond to each /dev/mtdX character device. These may represent physical/simulated flash devices, partitions on a flash - device, or concatenated flash devices. They exist regardless - of whether CONFIG_MTD_CHAR is actually enabled. + device, or concatenated flash devices. What: /sys/class/mtd/mtdXro/ Date: April 2009 @@ -23,8 +22,7 @@ KernelVersion: 2.6.29 Contact: linux-mtd@lists.infradead.org Description: These directories provide the corresponding read-only device - nodes for /sys/class/mtd/mtdX/ . They are only created - (for the benefit of udev) if CONFIG_MTD_CHAR is enabled. + nodes for /sys/class/mtd/mtdX/ . What: /sys/class/mtd/mtdX/dev Date: April 2009 diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 94a656131885..d9be7a97dff3 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -66,6 +66,83 @@ the ACPI device explicitly to acpi_platform_device_ids list defined in drivers/acpi/acpi_platform.c. This limitation is only for the platform devices, SPI and I2C devices are created automatically as described below. +DMA support +~~~~~~~~~~~ +DMA controllers enumerated via ACPI should be registered in the system to +provide generic access to their resources. For example, a driver that would +like to be accessible to slave devices via generic API call +dma_request_slave_channel() must register itself at the end of the probe +function like this: + + err = devm_acpi_dma_controller_register(dev, xlate_func, dw); + /* Handle the error if it's not a case of !CONFIG_ACPI */ + +and implement custom xlate function if needed (usually acpi_dma_simple_xlate() +is enough) which converts the FixedDMA resource provided by struct +acpi_dma_spec into the corresponding DMA channel. A piece of code for that case +could look like: + + #ifdef CONFIG_ACPI + struct filter_args { + /* Provide necessary information for the filter_func */ + ... + }; + + static bool filter_func(struct dma_chan *chan, void *param) + { + /* Choose the proper channel */ + ... + } + + static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) + { + dma_cap_mask_t cap; + struct filter_args args; + + /* Prepare arguments for filter_func */ + ... + return dma_request_channel(cap, filter_func, &args); + } + #else + static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec, + struct acpi_dma *adma) + { + return NULL; + } + #endif + +dma_request_slave_channel() will call xlate_func() for each registered DMA +controller. In the xlate function the proper channel must be chosen based on +information in struct acpi_dma_spec and the properties of the controller +provided by struct acpi_dma. + +Clients must call dma_request_slave_channel() with the string parameter that +corresponds to a specific FixedDMA resource. By default "tx" means the first +entry of the FixedDMA resource array, "rx" means the second entry. The table +below shows a layout: + + Device (I2C0) + { + ... + Method (_CRS, 0, NotSerialized) + { + Name (DBUF, ResourceTemplate () + { + FixedDMA (0x0018, 0x0004, Width32bit, _Y48) + FixedDMA (0x0019, 0x0005, Width32bit, ) + }) + ... + } + } + +So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in +this example. + +In robust cases the client unfortunately needs to call +acpi_dma_request_slave_chan_by_index() directly and therefore choose the +specific FixedDMA resource by its index. + SPI serial bus support ~~~~~~~~~~~~~~~~~~~~~~ Slave devices behind SPI bus have SpiSerialBus resource attached to them. @@ -199,6 +276,8 @@ the device to the driver. For example: { Name (SBUF, ResourceTemplate() { + ... + // Used to power on/off the device GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) @@ -206,10 +285,20 @@ the device to the driver. For example: // Pin List 0x0055 } + + // Interrupt for the device + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, + 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) + { + // Pin list + 0x0058 + } + ... - Return (SBUF) } + + Return (SBUF) } These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" @@ -220,6 +309,24 @@ The driver can do this by including and then calling acpi_get_gpio(path, gpio). This will return the Linux GPIO number or negative errno if there was no translation found. +In a simple case of just getting the Linux GPIO number from device +resources one can use acpi_get_gpio_by_index() helper function. It takes +pointer to the device and index of the GpioIo/GpioInt descriptor in the +device resources list. For example: + + int gpio_irq, gpio_power; + int ret; + + gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL); + if (gpio_irq < 0) + /* handle error */ + + gpio_power = acpi_get_gpio_by_index(dev, 0, NULL); + if (gpio_power < 0) + /* handle error */ + + /* Now we can use the GPIO numbers */ + Other GpioIo parameters must be converted first by the driver to be suitable to the gpiolib before passing them. diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt new file mode 100644 index 000000000000..77db8809bd96 --- /dev/null +++ b/Documentation/bcache.txt @@ -0,0 +1,431 @@ +Say you've got a big slow raid 6, and an X-25E or three. Wouldn't it be +nice if you could use them as cache... Hence bcache. + +Wiki and git repositories are at: + http://bcache.evilpiepirate.org + http://evilpiepirate.org/git/linux-bcache.git + http://evilpiepirate.org/git/bcache-tools.git + +It's designed around the performance characteristics of SSDs - it only allocates +in erase block sized buckets, and it uses a hybrid btree/log to track cached +extants (which can be anywhere from a single sector to the bucket size). It's +designed to avoid random writes at all costs; it fills up an erase block +sequentially, then issues a discard before reusing it. + +Both writethrough and writeback caching are supported. Writeback defaults to +off, but can be switched on and off arbitrarily at runtime. Bcache goes to +great lengths to protect your data - it reliably handles unclean shutdown. (It +doesn't even have a notion of a clean shutdown; bcache simply doesn't return +writes as completed until they're on stable storage). + +Writeback caching can use most of the cache for buffering writes - writing +dirty data to the backing device is always done sequentially, scanning from the +start to the end of the index. + +Since random IO is what SSDs excel at, there generally won't be much benefit +to caching large sequential IO. Bcache detects sequential IO and skips it; +it also keeps a rolling average of the IO sizes per task, and as long as the +average is above the cutoff it will skip all IO from that task - instead of +caching the first 512k after every seek. Backups and large file copies should +thus entirely bypass the cache. + +In the event of a data IO error on the flash it will try to recover by reading +from disk or invalidating cache entries. For unrecoverable errors (meta data +or dirty data), caching is automatically disabled; if dirty data was present +in the cache it first disables writeback caching and waits for all dirty data +to be flushed. + +Getting started: +You'll need make-bcache from the bcache-tools repository. Both the cache device +and backing device must be formatted before use. + make-bcache -B /dev/sdb + make-bcache -C /dev/sdc + +make-bcache has the ability to format multiple devices at the same time - if +you format your backing devices and cache device at the same time, you won't +have to manually attach: + make-bcache -B /dev/sda /dev/sdb -C /dev/sdc + +To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register: + + echo /dev/sdb > /sys/fs/bcache/register + echo /dev/sdc > /sys/fs/bcache/register + +To register your bcache devices automatically, you could add something like +this to an init script: + + echo /dev/sd* > /sys/fs/bcache/register_quiet + +It'll look for bcache superblocks and ignore everything that doesn't have one. + +Registering the backing device makes the bcache show up in /dev; you can now +format it and use it as normal. But the first time using a new bcache device, +it'll be running in passthrough mode until you attach it to a cache. See the +section on attaching. + +The devices show up at /dev/bcacheN, and can be controlled via sysfs from +/sys/block/bcacheN/bcache: + + mkfs.ext4 /dev/bcache0 + mount /dev/bcache0 /mnt + +Cache devices are managed as sets; multiple caches per set isn't supported yet +but will allow for mirroring of metadata and dirty data in the future. Your new +cache set shows up as /sys/fs/bcache/ + +ATTACHING: + +After your cache device and backing device are registered, the backing device +must be attached to your cache set to enable caching. Attaching a backing +device to a cache set is done thusly, with the UUID of the cache set in +/sys/fs/bcache: + + echo > /sys/block/bcache0/bcache/attach + +This only has to be done once. The next time you reboot, just reregister all +your bcache devices. If a backing device has data in a cache somewhere, the +/dev/bcache# device won't be created until the cache shows up - particularly +important if you have writeback caching turned on. + +If you're booting up and your cache device is gone and never coming back, you +can force run the backing device: + + echo 1 > /sys/block/sdb/bcache/running + +(You need to use /sys/block/sdb (or whatever your backing device is called), not +/sys/block/bcache0, because bcache0 doesn't exist yet. If you're using a +partition, the bcache directory would be at /sys/block/sdb/sdb2/bcache) + +The backing device will still use that cache set if it shows up in the future, +but all the cached data will be invalidated. If there was dirty data in the +cache, don't expect the filesystem to be recoverable - you will have massive +filesystem corruption, though ext4's fsck does work miracles. + +ERROR HANDLING: + +Bcache tries to transparently handle IO errors to/from the cache device without +affecting normal operation; if it sees too many errors (the threshold is +configurable, and defaults to 0) it shuts down the cache device and switches all +the backing devices to passthrough mode. + + - For reads from the cache, if they error we just retry the read from the + backing device. + + - For writethrough writes, if the write to the cache errors we just switch to + invalidating the data at that lba in the cache (i.e. the same thing we do for + a write that bypasses the cache) + + - For writeback writes, we currently pass that error back up to the + filesystem/userspace. This could be improved - we could retry it as a write + that skips the cache so we don't have to error the write. + + - When we detach, we first try to flush any dirty data (if we were running in + writeback mode). It currently doesn't do anything intelligent if it fails to + read some of the dirty data, though. + +TROUBLESHOOTING PERFORMANCE: + +Bcache has a bunch of config options and tunables. The defaults are intended to +be reasonable for typical desktop and server workloads, but they're not what you +want for getting the best possible numbers when benchmarking. + + - Bad write performance + + If write performance is not what you expected, you probably wanted to be + running in writeback mode, which isn't the default (not due to a lack of + maturity, but simply because in writeback mode you'll lose data if something + happens to your SSD) + + # echo writeback > /sys/block/bcache0/cache_mode + + - Bad performance, or traffic not going to the SSD that you'd expect + + By default, bcache doesn't cache everything. It tries to skip sequential IO - + because you really want to be caching the random IO, and if you copy a 10 + gigabyte file you probably don't want that pushing 10 gigabytes of randomly + accessed data out of your cache. + + But if you want to benchmark reads from cache, and you start out with fio + writing an 8 gigabyte test file - so you want to disable that. + + # echo 0 > /sys/block/bcache0/bcache/sequential_cutoff + + To set it back to the default (4 mb), do + + # echo 4M > /sys/block/bcache0/bcache/sequential_cutoff + + - Traffic's still going to the spindle/still getting cache misses + + In the real world, SSDs don't always keep up with disks - particularly with + slower SSDs, many disks being cached by one SSD, or mostly sequential IO. So + you want to avoid being bottlenecked by the SSD and having it slow everything + down. + + To avoid that bcache tracks latency to the cache device, and gradually + throttles traffic if the latency exceeds a threshold (it does this by + cranking down the sequential bypass). + + You can disable this if you need to by setting the thresholds to 0: + + # echo 0 > /sys/fs/bcache//congested_read_threshold_us + # echo 0 > /sys/fs/bcache//congested_write_threshold_us + + The default is 2000 us (2 milliseconds) for reads, and 20000 for writes. + + - Still getting cache misses, of the same data + + One last issue that sometimes trips people up is actually an old bug, due to + the way cache coherency is handled for cache misses. If a btree node is full, + a cache miss won't be able to insert a key for the new data and the data + won't be written to the cache. + + In practice this isn't an issue because as soon as a write comes along it'll + cause the btree node to be split, and you need almost no write traffic for + this to not show up enough to be noticable (especially since bcache's btree + nodes are huge and index large regions of the device). But when you're + benchmarking, if you're trying to warm the cache by reading a bunch of data + and there's no other traffic - that can be a problem. + + Solution: warm the cache by doing writes, or use the testing branch (there's + a fix for the issue there). + +SYSFS - BACKING DEVICE: + +attach + Echo the UUID of a cache set to this file to enable caching. + +cache_mode + Can be one of either writethrough, writeback, writearound or none. + +clear_stats + Writing to this file resets the running total stats (not the day/hour/5 minute + decaying versions). + +detach + Write to this file to detach from a cache set. If there is dirty data in the + cache, it will be flushed first. + +dirty_data + Amount of dirty data for this backing device in the cache. Continuously + updated unlike the cache set's version, but may be slightly off. + +label + Name of underlying device. + +readahead + Size of readahead that should be performed. Defaults to 0. If set to e.g. + 1M, it will round cache miss reads up to that size, but without overlapping + existing cache entries. + +running + 1 if bcache is running (i.e. whether the /dev/bcache device exists, whether + it's in passthrough mode or caching). + +sequential_cutoff + A sequential IO will bypass the cache once it passes this threshhold; the + most recent 128 IOs are tracked so sequential IO can be detected even when + it isn't all done at once. + +sequential_merge + If non zero, bcache keeps a list of the last 128 requests submitted to compare + against all new requests to determine which new requests are sequential + continuations of previous requests for the purpose of determining sequential + cutoff. This is necessary if the sequential cutoff value is greater than the + maximum acceptable sequential size for any single request. + +state + The backing device can be in one of four different states: + + no cache: Has never been attached to a cache set. + + clean: Part of a cache set, and there is no cached dirty data. + + dirty: Part of a cache set, and there is cached dirty data. + + inconsistent: The backing device was forcibly run by the user when there was + dirty data cached but the cache set was unavailable; whatever data was on the + backing device has likely been corrupted. + +stop + Write to this file to shut down the bcache device and close the backing + device. + +writeback_delay + When dirty data is written to the cache and it previously did not contain + any, waits some number of seconds before initiating writeback. Defaults to + 30. + +writeback_percent + If nonzero, bcache tries to keep around this percentage of the cache dirty by + throttling background writeback and using a PD controller to smoothly adjust + the rate. + +writeback_rate + Rate in sectors per second - if writeback_percent is nonzero, background + writeback is throttled to this rate. Continuously adjusted by bcache but may + also be set by the user. + +writeback_running + If off, writeback of dirty data will not take place at all. Dirty data will + still be added to the cache until it is mostly full; only meant for + benchmarking. Defaults to on. + +SYSFS - BACKING DEVICE STATS: + +There are directories with these numbers for a running total, as well as +versions that decay over the past day, hour and 5 minutes; they're also +aggregated in the cache set directory as well. + +bypassed + Amount of IO (both reads and writes) that has bypassed the cache + +cache_hits +cache_misses +cache_hit_ratio + Hits and misses are counted per individual IO as bcache sees them; a + partial hit is counted as a miss. + +cache_bypass_hits +cache_bypass_misses + Hits and misses for IO that is intended to skip the cache are still counted, + but broken out here. + +cache_miss_collisions + Counts instances where data was going to be inserted into the cache from a + cache miss, but raced with a write and data was already present (usually 0 + since the synchronization for cache misses was rewritten) + +cache_readaheads + Count of times readahead occured. + +SYSFS - CACHE SET: + +average_key_size + Average data per key in the btree. + +bdev<0..n> + Symlink to each of the attached backing devices. + +block_size + Block size of the cache devices. + +btree_cache_size + Amount of memory currently used by the btree cache + +bucket_size + Size of buckets + +cache<0..n> + Symlink to each of the cache devices comprising this cache set. + +cache_available_percent + Percentage of cache device free. + +clear_stats + Clears the statistics associated with this cache + +dirty_data + Amount of dirty data is in the cache (updated when garbage collection runs). + +flash_vol_create + Echoing a size to this file (in human readable units, k/M/G) creates a thinly + provisioned volume backed by the cache set. + +io_error_halflife +io_error_limit + These determines how many errors we accept before disabling the cache. + Each error is decayed by the half life (in # ios). If the decaying count + reaches io_error_limit dirty data is written out and the cache is disabled. + +journal_delay_ms + Journal writes will delay for up to this many milliseconds, unless a cache + flush happens sooner. Defaults to 100. + +root_usage_percent + Percentage of the root btree node in use. If this gets too high the node + will split, increasing the tree depth. + +stop + Write to this file to shut down the cache set - waits until all attached + backing devices have been shut down. + +tree_depth + Depth of the btree (A single node btree has depth 0). + +unregister + Detaches all backing devices and closes the cache devices; if dirty data is + present it will disable writeback caching and wait for it to be flushed. + +SYSFS - CACHE SET INTERNAL: + +This directory also exposes timings for a number of internal operations, with +separate files for average duration, average frequency, last occurence and max +duration: garbage collection, btree read, btree node sorts and btree splits. + +active_journal_entries + Number of journal entries that are newer than the index. + +btree_nodes + Total nodes in the btree. + +btree_used_percent + Average fraction of btree in use. + +bset_tree_stats + Statistics about the auxiliary search trees + +btree_cache_max_chain + Longest chain in the btree node cache's hash table + +cache_read_races + Counts instances where while data was being read from the cache, the bucket + was reused and invalidated - i.e. where the pointer was stale after the read + completed. When this occurs the data is reread from the backing device. + +trigger_gc + Writing to this file forces garbage collection to run. + +SYSFS - CACHE DEVICE: + +block_size + Minimum granularity of writes - should match hardware sector size. + +btree_written + Sum of all btree writes, in (kilo/mega/giga) bytes + +bucket_size + Size of buckets + +cache_replacement_policy + One of either lru, fifo or random. + +discard + Boolean; if on a discard/TRIM will be issued to each bucket before it is + reused. Defaults to off, since SATA TRIM is an unqueued command (and thus + slow). + +freelist_percent + Size of the freelist as a percentage of nbuckets. Can be written to to + increase the number of buckets kept on the freelist, which lets you + artificially reduce the size of the cache at runtime. Mostly for testing + purposes (i.e. testing how different size caches affect your hit rate), but + since buckets are discarded when they move on to the freelist will also make + the SSD's garbage collection easier by effectively giving it more reserved + space. + +io_errors + Number of errors that have occured, decayed by io_error_halflife. + +metadata_written + Sum of all non data writes (btree writes and all other metadata). + +nbuckets + Total buckets in this cache + +priority_stats + Statistics about how recently data in the cache has been accessed. This can + reveal your working set size. + +written + Sum of all data that has been written to the cache; comparison with + btree_written gives the amount of write inflation in bcache. diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index a5eb7d19a65d..9887f0414c16 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -5,7 +5,7 @@ The main aim of CFQ scheduler is to provide a fair allocation of the disk I/O bandwidth for all the processes which requests an I/O operation. CFQ maintains the per process queue for the processes which request I/O -operation(syncronous requests). In case of asynchronous requests, all the +operation(synchronous requests). In case of asynchronous requests, all the requests from all the processes are batched together according to their process's I/O priority. @@ -66,6 +66,47 @@ This parameter is used to set the timeout of synchronous requests. Default value of this is 124ms. In case to favor synchronous requests over asynchronous one, this value should be decreased relative to fifo_expire_async. +group_idle +----------- +This parameter forces idling at the CFQ group level instead of CFQ +queue level. This was introduced after after a bottleneck was observed +in higher end storage due to idle on sequential queue and allow dispatch +from a single queue. The idea with this parameter is that it can be run with +slice_idle=0 and group_idle=8, so that idling does not happen on individual +queues in the group but happens overall on the group and thus still keeps the +IO controller working. +Not idling on individual queues in the group will dispatch requests from +multiple queues in the group at the same time and achieve higher throughput +on higher end storage. + +Default value for this parameter is 8ms. + +latency +------- +This parameter is used to enable/disable the latency mode of the CFQ +scheduler. If latency mode (called low_latency) is enabled, CFQ tries +to recompute the slice time for each process based on the target_latency set +for the system. This favors fairness over throughput. Disabling low +latency (setting it to 0) ignores target latency, allowing each process in the +system to get a full time slice. + +By default low latency mode is enabled. + +target_latency +-------------- +This parameter is used to calculate the time slice for a process if cfq's +latency mode is enabled. It will ensure that sync requests have an estimated +latency. But if sequential workload is higher(e.g. sequential read), +then to meet the latency constraints, throughput may decrease because of less +time for each process to issue I/O request before the cfq queue is switched. + +Though this can be overcome by disabling the latency_mode, it may increase +the read latency for some applications. This parameter allows for changing +target_latency through the sysfs interface which can provide the balanced +throughput and read latency. + +Default value for target_latency is 300ms. + slice_async ----------- This parameter is same as of slice_sync but for asynchronous queue. The @@ -98,8 +139,8 @@ in the device exceeds this parameter. This parameter is used for synchronous request. In case of storage with several disk, this setting can limit the parallel -processing of request. Therefore, increasing the value can imporve the -performace although this can cause the latency of some I/O to increase due +processing of request. Therefore, increasing the value can improve the +performance although this can cause the latency of some I/O to increase due to more number of requests. CFQ Group scheduling diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 09027a9fece5..ddf4f93967a9 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -480,7 +480,9 @@ memory.stat file includes following statistics # per-memory cgroup local status cache - # of bytes of page cache memory. -rss - # of bytes of anonymous and swap cache memory. +rss - # of bytes of anonymous and swap cache memory (includes + transparent hugepages). +rss_huge - # of bytes of anonymous transparent hugepages. mapped_file - # of bytes of mapped file (includes tmpfs/shmem) pgpgin - # of charging events to the memory cgroup. The charging event happens each time a page is accounted as either mapped diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt index dffa2d620d6d..18de78599dd4 100644 --- a/Documentation/coccinelle.txt +++ b/Documentation/coccinelle.txt @@ -114,7 +114,7 @@ To apply Coccinelle to a specific directory, M= can be used. For example, to check drivers/net/wireless/ one may write: make coccicheck M=drivers/net/wireless/ - + To apply Coccinelle on a file basis, instead of a directory basis, the following command may be used: @@ -134,6 +134,15 @@ MODE variable explained above. In this mode, there is no information about semantic patches displayed, and no commit message proposed. + Additional flags +~~~~~~~~~~~~~~~~~~ + +Additional flags can be passed to spatch through the SPFLAGS +variable. + + make SPFLAGS=--use_glimpse coccicheck + +See spatch --help to learn more about spatch options. Proposing new semantic patches ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt index 6888a5efc860..c0105de55cbd 100644 --- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt +++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt @@ -6,6 +6,7 @@ provided by Arteris. Required properties: - compatible : Should be "ti,omap3-l3-smx" for OMAP3 family Should be "ti,omap4-l3-noc" for OMAP4 family +- reg: Contains L3 register address range for each noc domain. - ti,hwmods: "l3_main_1", ... One hwmod for each noc domain. Examples: diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt index 8732d4d41f8b..d02e27c764ec 100644 --- a/Documentation/devicetree/bindings/arm/omap/timer.txt +++ b/Documentation/devicetree/bindings/arm/omap/timer.txt @@ -1,7 +1,20 @@ OMAP Timer bindings Required properties: -- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers. +- compatible: Should be set to one of the below. Please note that + OMAP44xx devices have timer instances that are 100% + register compatible with OMAP3xxx devices as well as + newer timers that are not 100% register compatible. + So for OMAP44xx devices timer instances may use + different compatible strings. + + ti,omap2420-timer (applicable to OMAP24xx devices) + ti,omap3430-timer (applicable to OMAP3xxx/44xx devices) + ti,omap4430-timer (applicable to OMAP44xx devices) + ti,omap5430-timer (applicable to OMAP543x devices) + ti,am335x-timer (applicable to AM335x devices) + ti,am335x-timer-1ms (applicable to AM335x devices) + - reg: Contains timer register address range (base address and length). - interrupts: Contains the interrupt information for the timer. The @@ -22,7 +35,7 @@ Optional properties: Example: timer12: timer@48304000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48304000 0x400>; interrupts = <95>; ti,hwmods = "timer12" diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt index 64fc82bc8928..0df6acacfaea 100644 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ b/Documentation/devicetree/bindings/arm/primecell.txt @@ -16,14 +16,31 @@ Optional properties: - clocks : From common clock binding. First clock is phandle to clock for apb pclk. Additional clocks are optional and specific to those peripherals. - clock-names : From common clock binding. Shall be "apb_pclk" for first clock. +- dmas : From common DMA binding. If present, refers to one or more dma channels. +- dma-names : From common DMA binding, needs to match the 'dmas' property. + Devices with exactly one receive and transmit channel shall name + these "rx" and "tx", respectively. +- pinctrl- : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt +- pinctrl-names : Names corresponding to the numbered pinctrl states +- interrupts : one or more interrupt specifiers +- interrupt-names : names corresponding to the interrupts properties Example: serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; arm,primecell-periphid = <0x00341011>; + clocks = <&pclk>; clock-names = "apb_pclk"; - + + dmas = <&dma-controller 4>, <&dma-controller 5>; + dma-names = "rx", "tx"; + + pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; + pinctrl-names = "default","sleep"; + + interrupts = <0 11 0x4>; }; diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt new file mode 100644 index 000000000000..5039c0a12f55 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -0,0 +1,7 @@ +SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) + +Properties: + - name : should be 'sysreg'; + - compatible : should contain "samsung,-sysreg", "syscon"; + For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; + - reg : offset and length of the register set. diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt index 95ec7f825ede..2aff154be84e 100644 --- a/Documentation/devicetree/bindings/ata/pata-arasan.txt +++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt @@ -6,6 +6,26 @@ Required properties: - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - interrupt: Should contain the CF interrupt number +- clock-frequency: Interface clock rate, in Hz, one of + 25000000 + 33000000 + 40000000 + 50000000 + 66000000 + 75000000 + 100000000 + 125000000 + 150000000 + 166000000 + 200000000 + +Optional properties: +- arasan,broken-udma: if present, UDMA mode is unusable +- arasan,broken-mwdma: if present, MWDMA mode is unusable +- arasan,broken-pio: if present, PIO mode is unusable +- dmas: one DMA channel, as described in bindings/dma/dma.txt + required unless both UDMA and MWDMA mode are broken +- dma-names: the corresponding channel name, must be "data" Example: @@ -14,4 +34,6 @@ Example: reg = <0xfc000000 0x1000>; interrupt-parent = <&vic1>; interrupts = <12>; + dmas = <&dma-controller 23>; + dma-names = "data"; }; diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt index 2a0c904c46ae..d71b4b2c077d 100644 --- a/Documentation/devicetree/bindings/clock/imx5-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt @@ -38,7 +38,6 @@ clocks and IDs. usb_phy_podf 23 cpu_podf 24 di_pred 25 - tve_di 26 tve_s 27 uart1_ipg_gate 28 uart1_per_gate 29 @@ -172,6 +171,19 @@ clocks and IDs. can1_serial_gate 157 can1_ipg_gate 158 owire_gate 159 + gpu3d_s 160 + gpu2d_s 161 + gpu3d_gate 162 + gpu2d_gate 163 + garb_gate 164 + cko1_sel 165 + cko1_podf 166 + cko1 167 + cko2_sel 168 + cko2_podf 169 + cko2 170 + srtc_gate 171 + pata_gate 172 Examples (for mx53): diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 969b38e06ad3..6deb6fd1c7cd 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -205,6 +205,9 @@ clocks and IDs. enet_ref 190 usbphy1_gate 191 usbphy2_gate 192 + pll4_post_div 193 + pll5_post_div 194 + pll5_video_div 195 Examples: diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index 3c046ee6e8b5..c80e8a3402f0 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -1,14 +1,39 @@ * Atmel Direct Memory Access Controller (DMA) Required properties: -- compatible: Should be "atmel,-dma" -- reg: Should contain DMA registers location and length -- interrupts: Should contain DMA interrupt +- compatible: Should be "atmel,-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain DMA interrupt. +- #dma-cells: Must be <2>, used to represent the number of integer cells in +the dmas property of client devices. -Examples: +Example: -dma@ffffec00 { +dma0: dma@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21>; + #dma-cells = <2>; +}; + +DMA clients connected to the Atmel DMA controller must use the format +described in the dma.txt file, using a three-cell specifier for each channel: +a phandle plus two interger cells. +The three cells in order are: + +1. A phandle pointing to the DMA controller. +2. The memory interface (16 most significant bits), the peripheral interface +(16 less significant bits). +3. The peripheral identifier for the hardware handshaking interface. The +identifier can be different for tx and rx. + +Example: + +i2c0@i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + dmas = <&dma0 1 7>, + <&dma0 1 8>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt index ded0398d3bdc..a4873e5e3e36 100644 --- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -3,17 +3,58 @@ Required properties: - compatible : Should be "fsl,-dma-apbh" or "fsl,-dma-apbx" - reg : Should contain registers location and length +- interrupts : Should contain the interrupt numbers of DMA channels. + If a channel is empty/reserved, 0 should be filled in place. +- #dma-cells : Must be <1>. The number cell specifies the channel ID. +- dma-channels : Number of channels supported by the DMA controller + +Optional properties: +- interrupt-names : Name of DMA channel interrupts Supported chips: imx23, imx28. Examples: -dma-apbh@80004000 { + +dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; + interrupts = <82 83 84 85 + 88 88 88 88 + 88 88 88 88 + 87 86 0 0>; + interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", + "gpmi0", "gmpi1", "gpmi2", "gmpi3", + "gpmi4", "gmpi5", "gpmi6", "gmpi7", + "hsadc", "lcdif", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; }; -dma-apbx@80024000 { +dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; + interrupts = <78 79 66 0 + 80 81 68 69 + 70 71 72 73 + 74 75 76 77>; + interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + "saif0", "saif1", "i2c0", "i2c1", + "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", + "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; + #dma-cells = <1>; + dma-channels = <16>; +}; + +DMA clients connected to the MXS DMA controller must use the format +described in the dma.txt file. + +Examples: + +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; }; diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt index b41e5e52a676..96ec5179c8a0 100644 --- a/Documentation/devicetree/bindings/fb/mxsfb.txt +++ b/Documentation/devicetree/bindings/fb/mxsfb.txt @@ -5,9 +5,16 @@ Required properties: imx23 and imx28. - reg: Address and length of the register set for lcdif - interrupts: Should contain lcdif interrupts +- display : phandle to display node (see below for details) -Optional properties: -- panel-enable-gpios : Should specify the gpio for panel enable +* display node + +Required properties: +- bits-per-pixel : <16> for RGB565, <32> for RGB888/666. +- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>. + +Required sub-node: +- display-timings : Refer to binding doc display-timing.txt for details. Examples: @@ -15,5 +22,28 @@ lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; - panel-enable-gpios = <&gpio3 30 0>; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <164>; + hback-porch = <89>; + hsync-len = <10>; + vback-porch = <23>; + vfront-porch = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt new file mode 100644 index 000000000000..e466598105fc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt @@ -0,0 +1,26 @@ +Aeroflex Gaisler GRGPIO General Purpose I/O cores. + +The GRGPIO GPIO core is available in the GRLIB VHDL IP core library. + +Note: In the ordinary environment for the GRGPIO core, a Leon SPARC system, +these properties are built from information in the AMBA plug&play. + +Required properties: + +- name : Should be "GAISLER_GPIO" or "01_01a" + +- reg : Address and length of the register set for the device + +- interrupts : Interrupt numbers for this device + +Optional properties: + +- nbits : The number of gpio lines. If not present driver assumes 32 lines. + +- irqmap : An array with an index for each gpio line. An index is either a valid + index into the interrupts property array, or 0xffffffff that indicates + no irq for that line. Driver provides no interrupt support if not + present. + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt new file mode 100644 index 000000000000..629d0ef17308 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -0,0 +1,47 @@ +Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for +8-/16-bit I/O expander with serial interface (I2C/SPI) + +Required properties: +- compatible : Should be + - "mcp,mcp23s08" for 8 GPIO SPI version + - "mcp,mcp23s17" for 16 GPIO SPI version + - "mcp,mcp23008" for 8 GPIO I2C version or + - "mcp,mcp23017" for 16 GPIO I2C version of the chip +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. Flags are currently unused. +- gpio-controller : Marks the device node as a GPIO controller. +- reg : For an address on its bus. I2C uses this a the I2C address of the chip. + SPI uses this to specify the chipselect line which the chip is + connected to. The driver and the SPI variant of the chip support + multiple chips on the same chipselect. Have a look at + mcp,spi-present-mask below. + +Required device specific properties (only for SPI chips): +- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI + chips - as the name suggests. Multiple SPI chips can share the same + SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a + chip connected with the corresponding spi address set. For example if + you have a chip with address 3 connected, you have to set bit3 to 1, + which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not + possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at + least one bit to 1 for SPI chips. +- spi-max-frequency = The maximum frequency this chip is able to handle + +Example I2C: +gpiom1: gpio@20 { + compatible = "mcp,mcp23017"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; +}; + +Example SPI: +gpiom1: gpio@0 { + compatible = "mcp,mcp23s17"; + gpio-controller; + #gpio-cells = <2>; + spi-present-mask = <0x01>; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt index bff51a2fee1e..8d950522e7fa 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -5,12 +5,12 @@ Required properties: - "ti,omap2-gpio" for OMAP2 controllers - "ti,omap3-gpio" for OMAP3 controllers - "ti,omap4-gpio" for OMAP4 controllers +- gpio-controller : Marks the device node as a GPIO controller. - #gpio-cells : Should be two. - first cell is the pin number - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. +- interrupt-controller: Mark the device node as an interrupt controller. - #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is used to specify flags: bits[3:0] trigger type and level flags: @@ -20,8 +20,11 @@ Required properties: 8 = active low level-sensitive. OMAP specific properties: -- ti,hwmods: Name of the hwmod associated to the GPIO: - "gpio", being the 1-based instance number from the HW spec +- ti,hwmods: Name of the hwmod associated to the GPIO: + "gpio", being the 1-based instance number + from the HW spec. +- ti,gpio-always-on: Indicates if a GPIO bank is always powered and + so will never lose its logic state. Example: @@ -29,8 +32,8 @@ Example: gpio4: gpio4 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; - #gpio-cells = <2>; gpio-controller; - #interrupt-cells = <2>; + #gpio-cells = <2>; interrupt-controller; + #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt new file mode 100644 index 000000000000..2b14a940eb75 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt @@ -0,0 +1,20 @@ +* Samsung 2D Graphics Accelerator + +Required properties: + - compatible : value should be one among the following: + (a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC + (b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs + (c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC + + - reg : Physical base address of the IP registers and length of memory + mapped region. + + - interrupts : G2D interrupt number to the CPU. + +Example: + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt index 7a3fe9e5f4cb..4e1c8ac01eba 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -3,10 +3,13 @@ Required properties: - compatible: Should be "fsl,-i2c" - reg: Should contain registers location and length -- interrupts: Should contain ERROR and DMA interrupts +- interrupts: Should contain ERROR interrupt number - clock-frequency: Desired I2C bus clock frequency in Hz. Only 100000Hz and 400000Hz modes are supported. -- fsl,i2c-dma-channel: APBX DMA channel for the I2C +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and I2C DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Examples: @@ -15,7 +18,8 @@ i2c0: i2c@80058000 { #size-cells = <0>; compatible = "fsl,imx28-i2c"; reg = <0x80058000 2000>; - interrupts = <111 68>; + interrupts = <111>; clock-frequency = <100000>; - fsl,i2c-dma-channel = <6>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt new file mode 100644 index 000000000000..ef77cc7a0e46 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -0,0 +1,60 @@ +NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver. + +Required properties: +- compatible : should be: + "nvidia,tegra114-i2c" + "nvidia,tegra30-i2c" + "nvidia,tegra20-i2c" + "nvidia,tegra20-i2c-dvc" + Details of compatible are as follows: + nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C + controller. This only support master mode of I2C communication. Register + interface/offset and interrupts handling are different than generic I2C + controller. Driver of DVC I2C controller is only compatible with + "nvidia,tegra20-i2c-dvc". + nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support + master and slave mode of I2C communication. The i2c-tegra driver only + support master mode of I2C communication. Driver of I2C controller is + only compatible with "nvidia,tegra20-i2c". + nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is + very much similar to Tegra20 I2C controller with additional feature: + Continue Transfer Support. This feature helps to implement M_NO_START + as per I2C core API transfer flags. Driver of I2C controller is + compatible with "nvidia,tegra30-i2c" to enable the continue transfer + support. This is also compatible with "nvidia,tegra20-i2c" without + continue transfer support. + nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is + very much similar to Tegra30 I2C controller with some hardware + modification: + - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and + fast-clk. Tegra114 has only one clock source called as div-clk and + hence clock mechanism is changed in I2C controller. + - Tegra30/Tegra20 I2C controller has enabled per packet transfer by + default and there is no way to disable it. Tegra114 has this + interrupt disable by default and SW need to enable explicitly. + Due to above changes, Tegra114 I2C driver makes incompatible with + previous hardware driver. Hence, tegra114 I2C controller is compatible + with "nvidia,tegra114-i2c". +- reg: Should contain I2C controller registers physical address and length. +- interrupts: Should contain I2C controller interrupts. +- address-cells: Address cells for I2C device address. +- size-cells: Size of the I2C device address. +- clocks: Clock ID as per + Documentation/devicetree/bindings/clock/tegra.txt + for I2C controller. +- clock-names: Name of the clock: + Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk". + Tegra114 I2C controller: "div-clk". + +Example: + + i2c@7000c000 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>, <&tegra_car 124>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/input/cros-ec-keyb.txt b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt new file mode 100644 index 000000000000..0f6355ce39b5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cros-ec-keyb.txt @@ -0,0 +1,72 @@ +ChromeOS EC Keyboard + +Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on +a separate EC (Embedded Controller) device. It provides a message for reading +key scans from the EC. These are then converted into keycodes for processing +by the kernel. + +This binding is based on matrix-keymap.txt and extends/modifies it as follows: + +Required properties: +- compatible: "google,cros-ec-keyb" + +Optional properties: +- google,needs-ghost-filter: True to enable a ghost filter for the matrix +keyboard. This is recommended if the EC does not have its own logic or +hardware for this. + + +Example: + +cros-ec-keyb { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + /* + * Keymap entries take the form of 0xRRCCKKKK where + * RR=Row CC=Column KKKK=Key Code + * The values below are for a US keyboard layout and + * are taken from the Linux driver. Note that the + * 102ND key is not used for US keyboards. + */ + linux,keymap = < + /* CAPSLCK F1 B F10 */ + 0x0001003a 0x0002003b 0x00030030 0x00040044 + /* N = R_ALT ESC */ + 0x00060031 0x0008000d 0x000a0064 0x01010001 + /* F4 G F7 H */ + 0x0102003e 0x01030022 0x01040041 0x01060023 + /* ' F9 BKSPACE L_CTRL */ + 0x01080028 0x01090043 0x010b000e 0x0200001d + /* TAB F3 T F6 */ + 0x0201000f 0x0202003d 0x02030014 0x02040040 + /* ] Y 102ND [ */ + 0x0205001b 0x02060015 0x02070056 0x0208001a + /* F8 GRAVE F2 5 */ + 0x02090042 0x03010029 0x0302003c 0x03030006 + /* F5 6 - \ */ + 0x0304003f 0x03060007 0x0308000c 0x030b002b + /* R_CTRL A D F */ + 0x04000061 0x0401001e 0x04020020 0x04030021 + /* S K J ; */ + 0x0404001f 0x04050025 0x04060024 0x04080027 + /* L ENTER Z C */ + 0x04090026 0x040b001c 0x0501002c 0x0502002e + /* V X , M */ + 0x0503002f 0x0504002d 0x05050033 0x05060032 + /* L_SHIFT / . SPACE */ + 0x0507002a 0x05080035 0x05090034 0x050B0039 + /* 1 3 4 2 */ + 0x06010002 0x06020004 0x06030005 0x06040003 + /* 8 7 0 9 */ + 0x06050009 0x06060008 0x0608000b 0x0609000a + /* L_ALT DOWN RIGHT Q */ + 0x060a0038 0x060b006c 0x060c006a 0x07010010 + /* E R W I */ + 0x07020012 0x07030013 0x07040011 0x07050017 + /* U R_SHIFT P O */ + 0x07060016 0x07070036 0x07080019 0x07090018 + /* UP LEFT */ + 0x070b0067 0x070c0069>; +}; diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt new file mode 100644 index 000000000000..d98cf18c721c --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/as3711.txt @@ -0,0 +1,73 @@ +AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power +supplies, a battery charger and an RTC. So far only bindings for the two stepup +DCDC converters are defined. Other DCDC and LDO supplies are configured, using +standard regulator properties, they must belong to a sub-node, called +"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter +configuration should be placed in a subnode, called "backlight." + +Compulsory properties: +- compatible : must be "ams,as3711" +- reg : specifies the I2C address + +To use the SU1 converter as a backlight source the following two properties must +be provided: +- su1-dev : framebuffer phandle +- su1-max-uA : maximum current + +To use the SU2 converter as a backlight source the following two properties must +be provided: +- su2-dev : framebuffer phandle +- su1-max-uA : maximum current + +Additionally one of these properties must be provided to select the type of +feedback used: +- su2-feedback-voltage : voltage feedback is used +- su2-feedback-curr1 : CURR1 input used for current feedback +- su2-feedback-curr2 : CURR2 input used for current feedback +- su2-feedback-curr3 : CURR3 input used for current feedback +- su2-feedback-curr-auto: automatic current feedback selection + +and one of these to select the over-voltage protection pin +- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection +- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection +- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection +- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection + +If "su2-feedback-curr-auto" is selected, one or more of the following properties +have to be specified: +- su2-auto-curr1 : use CURR1 input for current feedback +- su2-auto-curr2 : use CURR2 input for current feedback +- su2-auto-curr3 : use CURR3 input for current feedback + +Example: + +as3711@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt new file mode 100644 index 000000000000..e0e59c58a1f9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -0,0 +1,56 @@ +ChromeOS Embedded Controller + +Google's ChromeOS EC is a Cortex-M device which talks to the AP and +implements various function such as keyboard and battery charging. + +The EC can be connect through various means (I2C, SPI, LPC) and the +compatible string used depends on the inteface. Each connection method has +its own driver which connects to the top level interface-agnostic EC driver. +Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to +the top-level driver. + +Required properties (I2C): +- compatible: "google,cros-ec-i2c" +- reg: I2C slave address + +Required properties (SPI): +- compatible: "google,cros-ec-spi" +- reg: SPI chip select + +Required properties (LPC): +- compatible: "google,cros-ec-lpc" +- reg: List of (IO address, size) pairs defining the interface uses + + +Example for I2C: + +i2c@12CA0000 { + cros-ec@1e { + reg = <0x1e>; + compatible = "google,cros-ec-i2c"; + interrupts = <14 0>; + interrupt-parent = <&wakeup_eint>; + wakeup-source; + }; + + +Example for SPI: + +spi@131b0000 { + ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0x0>; + interrupts = <14 0>; + interrupt-parent = <&wakeup_eint>; + wakeup-source; + spi-max-frequency = <5000000>; + controller-data { + cs-gpio = <&gpf0 3 4 3 0>; + samsung,spi-cs; + samsung,spi-feedback-delay = <2>; + }; + }; +}; + + +Example for LPC is not supplied as it is not yet implemented. diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt new file mode 100644 index 000000000000..b381fa696bf9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt @@ -0,0 +1,80 @@ +OMAP HS USB Host + +Required properties: + +- compatible: should be "ti,usbhs-host" +- reg: should contain one register range i.e. start and length +- ti,hwmods: must contain "usb_host_hs" + +Optional properties: + +- num-ports: number of USB ports. Usually this is automatically detected + from the IP's revision register but can be overridden by specifying + this property. A maximum of 3 ports are supported at the moment. + +- portN-mode: String specifying the port mode for port N, where N can be + from 1 to 3. If the port mode is not specified, that port is treated + as unused. When specified, it must be one of the following. + "ehci-phy", + "ehci-tll", + "ehci-hsic", + "ohci-phy-6pin-datse0", + "ohci-phy-6pin-dpdm", + "ohci-phy-3pin-datse0", + "ohci-phy-4pin-dpdm", + "ohci-tll-6pin-datse0", + "ohci-tll-6pin-dpdm", + "ohci-tll-3pin-datse0", + "ohci-tll-4pin-dpdm", + "ohci-tll-2pin-datse0", + "ohci-tll-2pin-dpdm", + +- single-ulpi-bypass: Must be present if the controller contains a single + ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 + +Required properties if child node exists: + +- #address-cells: Must be 1 +- #size-cells: Must be 1 +- ranges: must be present + +Properties for children: + +The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. +See Documentation/devicetree/bindings/usb/omap-ehci.txt and +omap3-ohci.txt + +Example for OMAP4: + +usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; + reg = <0x4a064800 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 76 0x4>; + }; + + usbhsehci: ehci@4a064c00 { + compatible = "ti,ehci-omap", "usb-ehci"; + reg = <0x4a064c00 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 77 0x4>; + }; +}; + +&usbhshost { + port1-mode = "ehci-phy"; + port2-mode = "ehci-tll"; + port3-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy 0 &hsusb3_phy>; +}; diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt new file mode 100644 index 000000000000..62fe69724e3b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/omap-usb-tll.txt @@ -0,0 +1,17 @@ +OMAP HS USB Host TLL (Transceiver-Less Interface) + +Required properties: + +- compatible : should be "ti,usbhs-tll" +- reg : should contain one register range i.e. start and length +- interrupts : should contain the TLL module's interrupt +- ti,hwmod : must contain "usb_tll_hs" + +Example: + + usbhstll: usbhstll@4a062000 { + compatible = "ti,usbhs-tll"; + reg = <0x4a062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; + }; diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt new file mode 100644 index 000000000000..b35a8d04f8b6 --- /dev/null +++ b/Documentation/devicetree/bindings/mips/ralink.txt @@ -0,0 +1,17 @@ +Ralink MIPS SoC device tree bindings + +1. SoCs + +Each device tree must specify a compatible value for the Ralink SoC +it uses in the compatible property of the root node. The compatible +value must be one of the following values: + + ralink,rt2880-soc + ralink,rt3050-soc + ralink,rt3052-soc + ralink,rt3350-soc + ralink,rt3352-soc + ralink,rt3883-soc + ralink,rt5350-soc + ralink,mt7620a-soc + ralink,mt7620n-soc diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt index 54949f6faede..515addc20070 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -9,15 +9,19 @@ and the properties used by the mxsmmc driver. Required properties: - compatible: Should be "fsl,-mmc". The supported chips include imx23 and imx28. -- interrupts: Should contain ERROR and DMA interrupts -- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- interrupts: Should contain ERROR interrupt number +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SSP DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Examples: ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; reg = <0x80010000 2000>; - interrupts = <96 82>; - fsl,ssp-dma-channel = <0>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index e7f8d7ed47eb..6a983c1d87cd 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -56,20 +56,20 @@ Example for an AM33xx board: nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; - gpmc,sync-clk = <0>; - gpmc,cs-on = <0>; - gpmc,cs-rd-off = <44>; - gpmc,cs-wr-off = <44>; - gpmc,adv-on = <6>; - gpmc,adv-rd-off = <34>; - gpmc,adv-wr-off = <44>; - gpmc,we-off = <40>; - gpmc,oe-off = <54>; - gpmc,access = <64>; - gpmc,rd-cycle = <82>; - gpmc,wr-cycle = <82>; - gpmc,wr-access = <40>; - gpmc,wr-data-mux-bus = <0>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index 3fb3f9015365..551b2a179d01 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -7,10 +7,12 @@ Required properties: - compatible : should be "fsl,-gpmi-nand" - reg : should contain registers location and length for gpmi and bch. - reg-names: Should contain the reg names "gpmi-nand" and "bch" - - interrupts : The first is the DMA interrupt number for GPMI. - The second is the BCH interrupt number. - - interrupt-names : The interrupt names "gpmi-dma", "bch"; - - fsl,gpmi-dma-channel : Should contain the dma channel it uses. + - interrupts : BCH interrupt number. + - interrupt-names : Should be "bch". + - dmas: DMA specifier, consisting of a phandle to DMA controller node + and GPMI DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. + - dma-names: Must be "rx-tx". Optional properties: - nand-on-flash-bbt: boolean to enable on flash bbt option if not @@ -27,9 +29,10 @@ gpmi-nand@8000c000 { #size-cells = <1>; reg = <0x8000c000 2000>, <0x8000a000 2000>; reg-names = "gpmi-nand", "bch"; - interrupts = <88>, <41>; - interrupt-names = "gpmi-dma", "bch"; - fsl,gpmi-dma-channel = <4>; + interrupts = <41>; + interrupt-names = "bch"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; partition@0 { ... diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index 6e1f61f1e789..9315ac96b49b 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -5,8 +5,12 @@ on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -#address-cells & #size-cells must both be present in the mtd device and be -equal to 1. +#address-cells & #size-cells must both be present in the mtd device. There are +two valid values for both: +<1>: for partitions that require a single 32-bit cell to represent their + size/address (aka the value is below 4 GiB) +<2>: for partitions that require two 32-bit cells to represent their + size/address (aka the value is 4 GiB or greater). Required properties: - reg : The partition's offset and size within the mtd bank. @@ -36,3 +40,31 @@ flash@0 { reg = <0x0100000 0x200000>; }; }; + +flash@1 { + #address-cells = <1>; + #size-cells = <2>; + + /* a 4 GiB partition */ + partition@0 { + label = "filesystem"; + reg = <0x00000000 0x1 0x00000000>; + }; +}; + +flash@2 { + #address-cells = <2>; + #size-cells = <2>; + + /* an 8 GiB partition */ + partition@0 { + label = "filesystem #1"; + reg = <0x0 0x00000000 0x2 0x00000000>; + }; + + /* a 4 GiB partition */ + partition@200000000 { + label = "filesystem #2"; + reg = <0x2 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index 24cb4e46f675..ace4a64b3695 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -26,16 +26,16 @@ Required properties: - bank-width: Address width of the device in bytes. GPMC supports 8-bit and 16-bit devices and so must be either 1 or 2 bytes. - compatible: Compatible string property for the ethernet child device. -- gpmc,cs-on: Chip-select assertion time -- gpmc,cs-rd-off: Chip-select de-assertion time for reads -- gpmc,cs-wr-off: Chip-select de-assertion time for writes -- gpmc,oe-on: Output-enable assertion time -- gpmc,oe-off Output-enable de-assertion time -- gpmc,we-on: Write-enable assertion time -- gpmc,we-off: Write-enable de-assertion time -- gpmc,access: Start cycle to first data capture (read access) -- gpmc,rd-cycle: Total read cycle time -- gpmc,wr-cycle: Total write cycle time +- gpmc,cs-on-ns: Chip-select assertion time +- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads +- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes +- gpmc,oe-on-ns: Output-enable assertion time +- gpmc,oe-off-ns: Output-enable de-assertion time +- gpmc,we-on-ns: Write-enable assertion time +- gpmc,we-off-ns: Write-enable de-assertion time +- gpmc,access-ns: Start cycle to first data capture (read access) +- gpmc,rd-cycle-ns: Total read cycle time +- gpmc,wr-cycle-ns: Total write cycle time - reg: Chip-select, base address (relative to chip-select) and size of the memory mapped for the device. Note that base address will be typically 0 as this @@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 { bank-width = <2>; gpmc,mux-add-data; - gpmc,cs-on = <0>; - gpmc,cs-rd-off = <186>; - gpmc,cs-wr-off = <186>; - gpmc,adv-on = <12>; - gpmc,adv-rd-off = <48>; - gpmc,adv-wr-off = <48>; - gpmc,oe-on = <54>; - gpmc,oe-off = <168>; - gpmc,we-on = <54>; - gpmc,we-off = <168>; - gpmc,rd-cycle = <186>; - gpmc,wr-cycle = <186>; - gpmc,access = <114>; - gpmc,page-burst-access = <6>; - gpmc,bus-turnaround = <12>; - gpmc,cycle2cycle-delay = <18>; - gpmc,wr-data-mux-bus = <90>; - gpmc,wr-access = <186>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt index 44afa0e5057d..4ff65047bb9a 100644 --- a/Documentation/devicetree/bindings/net/macb.txt +++ b/Documentation/devicetree/bindings/net/macb.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". - Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on + Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt index f7e8e8f4d9a3..3077370c89af 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt @@ -70,6 +70,10 @@ Optional subnode-properties: 0: Disable the internal pull-up 1: Enable the internal pull-up +Note that when enabling the pull-up, the internal pad keeper gets disabled. +Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up +will only disable the internal pad keeper. + Examples: pinctrl@80018000 { diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.txt b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt new file mode 100644 index 000000000000..ac67c687a327 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.txt @@ -0,0 +1,43 @@ +* Samsung PWM timers + +Samsung SoCs contain PWM timer blocks which can be used for system clock source +and clock event timers, as well as to drive SoC outputs with PWM signal. Each +PWM timer block provides 5 PWM channels (not all of them can drive physical +outputs - see SoC and board manual). + +Be aware that the clocksource driver supports only uniprocessor systems. + +Required properties: +- compatible : should be one of following: + samsung,s3c2410-pwm - for 16-bit timers present on S3C24xx SoCs + samsung,s3c6400-pwm - for 32-bit timers present on S3C64xx SoCs + samsung,s5p6440-pwm - for 32-bit timers present on S5P64x0 SoCs + samsung,s5pc100-pwm - for 32-bit timers present on S5PC100, S5PV210, + Exynos4210 rev0 SoCs + samsung,exynos4210-pwm - for 32-bit timers present on Exynos4210, + Exynos4x12 and Exynos5250 SoCs +- reg: base address and size of register area +- interrupts: list of timer interrupts (one interrupt per timer, starting at + timer 0) +- #pwm-cells: number of cells used for PWM specifier - must be 3 + the specifier format is as follows: + - phandle to PWM controller node + - index of PWM channel (from 0 to 4) + - PWM signal period in nanoseconds + - bitmask of optional PWM flags: + 0x1 - invert PWM signal + +Optional properties: +- samsung,pwm-outputs: list of PWM channels used as PWM outputs on particular + platform - an array of up to 5 elements being indices of PWM channels + (from 0 to 4), the order does not matter. + +Example: + pwm@7f006000 { + compatible = "samsung,s3c6400-pwm"; + reg = <0x7f006000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <23>, <24>, <25>, <27>, <28>; + samsung,pwm-outputs = <0>, <1>; + #pwm-cells = <3>; + } diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt index 131e8c11d26f..681afad73778 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt @@ -1,7 +1,9 @@ TI SOC ECAP based APWM controller Required properties: -- compatible: Must be "ti,am33xx-ecap" +- compatible: Must be "ti,-ecap". + for am33xx - compatible = "ti,am33xx-ecap"; + for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap"; - #pwm-cells: Should be 3. Number of cells being used to specify PWM property. First cell specifies the per-chip index of the PWM to use, the second cell is the period in nanoseconds and bit 0 in the third cell is used to @@ -15,9 +17,15 @@ Optional properties: Example: -ecap0: ecap@0 { +ecap0: ecap@0 { /* ECAP on am33xx */ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; }; + +ecap0: ecap@0 { /* ECAP on da850 */ + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x306000 0x80>; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt index 4fc7079d822e..337c6fc65d3f 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt @@ -1,7 +1,9 @@ TI SOC EHRPWM based PWM controller Required properties: -- compatible : Must be "ti,am33xx-ehrpwm" +- compatible: Must be "ti,-ehrpwm". + for am33xx - compatible = "ti,am33xx-ehrpwm"; + for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; - #pwm-cells: Should be 3. Number of cells being used to specify PWM property. First cell specifies the per-chip index of the PWM to use, the second cell is the period in nanoseconds and bit 0 in the third cell is used to @@ -15,9 +17,15 @@ Optional properties: Example: -ehrpwm0: ehrpwm@0 { +ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */ compatible = "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x100>; ti,hwmods = "ehrpwm0"; }; + +ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */ + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x300000 0x2000>; +}; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt new file mode 100644 index 000000000000..13301777e11c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt @@ -0,0 +1,49 @@ +Freescale i.MX System Reset Controller +====================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "fsl,-src" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain SRC interrupt and CPU WDOG interrupt, + in this order. +- #reset-cells: 1, see below + +example: + +src: src@020d8000 { + compatible = "fsl,imx6q-src"; + reg = <0x020d8000 0x4000>; + interrupts = <0 91 0x04 0 96 0x04>; + #reset-cells = <1>; +}; + +Specifying reset lines connected to IP modules +============================================== + +The system reset controller can be used to reset the GPU, VPU, +IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device +nodes should specify the reset line on the SRC in their resets +property, containing a phandle to the SRC device node and a +RESET_INDEX specifying which module to reset, as described in +reset.txt + +example: + + ipu1: ipu@02400000 { + resets = <&src 2>; + }; + ipu2: ipu@02800000 { + resets = <&src 4>; + }; + +The following RESET_INDEX values are valid for i.MX5: +GPU_RESET 0 +VPU_RESET 1 +IPU1_RESET 2 +OPEN_VG_RESET 3 +The following additional RESET_INDEX value is valid for i.MX6: +IPU2_RESET 4 diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt new file mode 100644 index 000000000000..5d2e840ae65c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/pl011.txt @@ -0,0 +1,17 @@ +* ARM AMBA Primecell PL011 serial UART + +Required properties: +- compatible: must be "arm,primecell", "arm,pl011" +- reg: exactly one register range with length 0x1000 +- interrupts: exactly one interrupt specifier + +Optional properties: +- pinctrl: When present, must have one state named "sleep" + and one state named "default" +- clocks: When present, must refer to exactly one clock named + "apb_pclk" +- dmas: When present, may have one or two dma channels. + The first one must be named "rx", the second one + must be named "tx". + +See also bindings/arm/primecell.txt diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt index b77a97c9101e..05ffecb57103 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt @@ -2,6 +2,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-alc5632" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pll_a" (The Tegra clock of that name), + "pll_a_out0" (The Tegra clock of that name), + "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, @@ -56,4 +61,7 @@ sound { nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&alc5632>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt index 04b14cfb1f16..ef1fe7358279 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt @@ -2,6 +2,11 @@ NVIDIA Tegra audio complex for TrimSlice Required properties: - compatible : "nvidia,tegra-audio-trimslice" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pll_a" (The Tegra clock of that name), + "pll_a_out0" (The Tegra clock of that name), + "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,i2s-controller : The phandle of the Tegra I2S1 controller - nvidia,audio-codec : The phandle of the WM8903 audio codec @@ -11,4 +16,6 @@ sound { compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt index c4dd39ce6165..d14510613a7f 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt @@ -2,6 +2,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm8753" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pll_a" (The Tegra clock of that name), + "pll_a_out0" (The Tegra clock of that name), + "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, @@ -50,5 +55,8 @@ sound { nvidia,i2s-controller = <&i2s1>; nvidia,audio-codec = <&wm8753>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt index d5b0da8bf1d8..3bf722deb722 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt @@ -2,6 +2,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm8903" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pll_a" (The Tegra clock of that name), + "pll_a_out0" (The Tegra clock of that name), + "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, @@ -67,5 +72,8 @@ sound { nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt index be35d34e8b26..ad589b163639 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt @@ -2,6 +2,11 @@ NVIDIA Tegra audio complex Required properties: - compatible : "nvidia,tegra-audio-wm9712" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must include the following entries: + "pll_a" (The Tegra clock of that name), + "pll_a_out0" (The Tegra clock of that name), + "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) - nvidia,model : The user-visible name of this sound complex. - nvidia,audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, @@ -48,4 +53,7 @@ sound { "Mic", "MIC1"; nvidia,ac97-controller = <&ac97>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt index 7a7eb1e7bda6..f2f3e80934d2 100644 --- a/Documentation/devicetree/bindings/sound/wm8994.txt +++ b/Documentation/devicetree/bindings/sound/wm8994.txt @@ -5,14 +5,70 @@ on the board). Required properties: - - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958" + - compatible : One of "wlf,wm1811", "wlf,wm8994" or "wlf,wm8958". - reg : the I2C address of the device for I2C, the chip select number for SPI. + - gpio-controller : Indicates this device is a GPIO controller. + - #gpio-cells : Must be 2. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + + - AVDD2-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply, + SPKVDD1-supply, SPKVDD2-supply : power supplies for the device, as covered + in Documentation/devicetree/bindings/regulator/regulator.txt + +Optional properties: + + - interrupts : The interrupt line the IRQ signal for the device is + connected to. This is optional, if it is not connected then none + of the interrupt related properties should be specified. + - interrupt-controller : These devices contain interrupt controllers + and may provide interrupt services to other devices if they have an + interrupt line connected. + - interrupt-parent : The parent interrupt controller. + - #interrupt-cells: the number of cells to describe an IRQ, this should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupts.txt + + - wlf,gpio-cfg : A list of GPIO configuration register values. If absent, + no configuration of these registers is performed. If any value is + over 0xffff then the register will be left as default. If present 11 + values must be supplied. + + - wlf,micbias-cfg : Two MICBIAS register values for WM1811 or + WM8958. If absent the register defaults will be used. + + - wlf,ldo1ena : GPIO specifier for control of LDO1ENA input to device. + - wlf,ldo2ena : GPIO specifier for control of LDO2ENA input to device. + + - wlf,lineout1-se : If present LINEOUT1 is in single ended mode. + - wlf,lineout2-se : If present LINEOUT2 is in single ended mode. + + - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback + connected. + - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback + connected. + + - wlf,ldoena-always-driven : If present LDOENA is always driven. + Example: codec: wm8994@1a { compatible = "wlf,wm8994"; reg = <0x1a>; + + gpio-controller; + #gpio-cells = <2>; + + lineout1-se; + + AVDD2-supply = <®ulator>; + CPVDD-supply = <®ulator>; + DBVDD1-supply = <®ulator>; + DBVDD2-supply = <®ulator>; + DBVDD3-supply = <®ulator>; + SPKVDD1-supply = <®ulator>; + SPKVDD2-supply = <®ulator>; }; diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt index e2e13957c2a4..3499b73293c2 100644 --- a/Documentation/devicetree/bindings/spi/mxs-spi.txt +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt @@ -3,8 +3,11 @@ Required properties: - compatible: Should be "fsl,-spi", where soc is "imx23" or "imx28" - reg: Offset and length of the register set for the device -- interrupts: Should contain SSP interrupts (error irq first, dma irq second) -- fsl,ssp-dma-channel: APBX DMA channel for the SSP +- interrupts: Should contain SSP ERROR interrupt +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SSP DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". Optional properties: - clock-frequency : Input clock frequency to the SPI block in Hz. @@ -17,6 +20,7 @@ ssp0: ssp@80010000 { #size-cells = <0>; compatible = "fsl,imx28-spi"; reg = <0x80010000 0x2000>; - interrupts = <96 82>; - fsl,ssp-dma-channel = <0>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; }; diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt new file mode 100644 index 000000000000..6d0ac8d0ad9b --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -0,0 +1,51 @@ +Davinci SPI controller device bindings + +Required properties: +- #address-cells: number of cells required to define a chip select + address on the SPI bus. Should be set to 1. +- #size-cells: should be zero. +- compatible: + - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family + - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family +- reg: Offset and length of SPI controller register space +- num-cs: Number of chip selects +- ti,davinci-spi-intr-line: interrupt line used to connect the SPI + IP to the interrupt controller within the SoC. Possible values + are 0 and 1. Manual says one of the two possible interrupt + lines can be tied to the interrupt controller. Set this + based on a specifc SoC configuration. +- interrupts: interrupt number mapped to CPU. +- clocks: spi clk phandle + +Example of a NOR flash slave device (n25q032) connected to DaVinci +SPI controller device over the SPI bus. + +spi0:spi@20BF0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,dm6446-spi"; + reg = <0x20BF0000 0x1000>; + num-cs = <4>; + ti,davinci-spi-intr-line = <0>; + interrupts = <338>; + clocks = <&clkspi>; + + flash: n25q032@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p32"; + spi-max-frequency = <25000000>; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "test"; + reg = <0x80000 0x380000>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt index f158fd31cfda..22ed6797216d 100644 --- a/Documentation/devicetree/bindings/spi/spi_pl022.txt +++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt @@ -16,6 +16,11 @@ Optional properties: device will be suspended immediately - pl022,rt : indicates the controller should run the message pump with realtime priority to minimise the transfer latency on the bus (boolean) +- dmas : Two or more DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt +- dma-names: Names for the dma channels, if present. There must be at + least one channel named "tx" for transmit and named "rx" for + receive. SPI slave nodes must be children of the SPI master node and can @@ -32,3 +37,34 @@ contain the following properties. - pl022,wait-state : Microwire interface: Wait state - pl022,duplex : Microwire interface: Full/Half duplex + +Example: + + spi@e0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xe0100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 31 0x4>; + dmas = <&dma-controller 23 1>, + <&dma-controller 24 0>; + dma-names = "rx", "tx"; + + m25p80@1 { + compatible = "st,m25p80"; + reg = <1>; + spi-max-frequency = <12000000>; + spi-cpol; + spi-cpha; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable; + pl022,com-mode = <0x2>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + pl022,ctrl-len = <0x11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; + }; + diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt index 8071ac20d4b3..b876d4925a57 100644 --- a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt @@ -8,6 +8,8 @@ Required properties: - interrupts: Should contain sync interrupt and error interrupt, in this order. - #crtc-cells: 1, See below +- resets: phandle pointing to the system reset controller and + reset line index, see reset/fsl,imx-src.txt for details example: @@ -16,6 +18,7 @@ ipu: ipu@18000000 { compatible = "fsl,imx53-ipu"; reg = <0x18000000 0x080000000>; interrupts = <11 10>; + resets = <&src 2>; }; Parallel display support diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt new file mode 100644 index 000000000000..fff93d5f92de --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -0,0 +1,22 @@ +* Marvell Armada 370/XP thermal management + +Required properties: + +- compatible: Should be set to one of the following: + marvell,armada370-thermal + marvell,armadaxp-thermal + +- reg: Device's register space. + Two entries are expected, see the examples below. + The first one is required for the sensor register; + the second one is required for the control register + to be used for sensor initialization (a.k.a. calibration). + +Example: + + thermal@d0018300 { + compatible = "marvell,armada370-thermal"; + reg = <0xd0018300 0x4 + 0xd0018304 0x4>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt new file mode 100644 index 000000000000..5cd8eee74af1 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/arm,sp804.txt @@ -0,0 +1,29 @@ +ARM sp804 Dual Timers +--------------------------------------- + +Required properties: +- compatible: Should be "arm,sp804" & "arm,primecell" +- interrupts: Should contain the list of Dual Timer interrupts. This is the + interrupt for timer 1 and timer 2. In the case of a single entry, it is + the combined interrupt or if "arm,sp804-has-irq" is present that + specifies which timer interrupt is connected. +- reg: Should contain location and length for dual timer register. +- clocks: clocks driving the dual timer hardware. This list should be 1 or 3 + clocks. With 3 clocks, the order is timer0 clock, timer1 clock, + apb_pclk. A single clock can also be specified if the same clock is + used for all clock inputs. + +Optional properties: +- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this + specifies if the irq connection is for timer 1 or timer 2. A value of 1 + or 2 should be used. + +Example: + + timer0: timer@fc800000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xfc800000 0x1000>; + interrupts = <0 0 4>, <0 1 4>; + clocks = <&timclk1 &timclk2 &pclk>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt index 273a8d5b3300..2c00ec64628e 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt @@ -5,20 +5,18 @@ Required properties: imx23 and imx28. - reg : Address and length of the register set for the device - interrupts : Should contain the auart interrupt numbers - -Optional properties: -- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other - is for TX. If you add this property, it also means that you - will enable the DMA support for the auart. - Note: due to the hardware bug in imx23(see errata : 2836), - only the imx28 can enable the DMA support for the auart. +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and AUART DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: "rx" for RX channel, "tx" for TX channel. Example: auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; - interrupts = <112 70 71>; - fsl,auart-dma-channel = <8 9>; + interrupts = <112>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; }; Note: Each auart port should have an alias correctly numbered in "aliases" diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt index f66fcddba46f..b3abde736017 100644 --- a/Documentation/devicetree/bindings/usb/exynos-usb.txt +++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt @@ -10,6 +10,8 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". Optional properties: - samsung,vbus-gpio: if present, specifies the GPIO that @@ -22,6 +24,9 @@ Example: reg = <0x12110000 0x100>; interrupts = <0 71 0>; samsung,vbus-gpio = <&gpx2 6 1 3 3>; + + clocks = <&clock 285>; + clock-names = "usbhost"; }; OHCI @@ -31,10 +36,15 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. + - clocks: from common clock binding: handle to usb clock. + - clock-names: from common clock binding: Shall be "usbhost". Example: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 662f0f1d2315..d4769f343d6c 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -18,6 +18,7 @@ OMAP MUSB GLUE represents PERIPHERAL. - power : Should be "50". This signifies the controller can supply upto 100mA when operating in host mode. + - usb-phy : the phandle for the PHY device Optional properties: - ctrl-module : phandle of the control module this glue uses to write to diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 4d1919bf2332..6931c4348d24 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -42,6 +42,7 @@ onnn ON Semiconductor Corp. picochip Picochip Ltd powervr PowerVR (deprecated, use img) qcom Qualcomm, Inc. +ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt similarity index 100% rename from Documentation/devicetree/bindings/drm/exynos/hdmi.txt rename to Documentation/devicetree/bindings/video/exynos_hdmi.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt similarity index 100% rename from Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt rename to Documentation/devicetree/bindings/video/exynos_hdmiddc.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt similarity index 100% rename from Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt rename to Documentation/devicetree/bindings/video/exynos_hdmiphy.txt diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt similarity index 100% rename from Documentation/devicetree/bindings/drm/exynos/mixer.txt rename to Documentation/devicetree/bindings/video/exynos_mixer.txt diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt new file mode 100644 index 000000000000..778838a0336a --- /dev/null +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt @@ -0,0 +1,65 @@ +Device-Tree bindings for Samsung SoC display controller (FIMD) + +FIMD (Fully Interactive Mobile Display) is the Display Controller for the +Samsung series of SoCs which transfers the image data from a video memory +buffer to an external LCD interface. + +Required properties: +- compatible: value should be one of the following + "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ + "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ + "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */ + "samsung,s5pc100-fimd"; /* for S5PC100 SoC */ + "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ + "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ + "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */ + +- reg: physical base address and length of the FIMD registers set. + +- interrupt-parent: should be the phandle of the fimd controller's + parent interrupt controller. + +- interrupts: should contain a list of all FIMD IP block interrupts in the + order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier + format depends on the interrupt controller used. + +- interrupt-names: should contain the interrupt names: "fifo", "vsync", + "lcd_sys", in the same order as they were listed in the interrupts + property. + +- pinctrl-0: pin control group to be used for this controller. + +- pinctrl-names: must contain a "default" entry. + +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. + +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "sclk_fimd" and "fimd". + +Optional Properties: +- samsung,power-domain: a phandle to FIMD power domain node. + +Example: + +SoC specific DT entry: + + fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock 140>, <&clock 283>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + status = "disabled"; + }; + +Board specific DT entry: + + fimd@11c00000 { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt new file mode 100644 index 000000000000..3ea460583111 --- /dev/null +++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt @@ -0,0 +1,25 @@ +Simple Framebuffer + +A simple frame-buffer describes a raw memory region that may be rendered to, +with the assumption that the display hardware has already been set up to scan +out from that buffer. + +Required properties: +- compatible: "simple-framebuffer" +- reg: Should contain the location and size of the framebuffer memory. +- width: The width of the framebuffer in pixels. +- height: The height of the framebuffer in pixels. +- stride: The number of bytes in each line of the framebuffer. +- format: The format of the framebuffer surface. Valid values are: + - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b). + +Example: + + framebuffer { + compatible = "simple-framebuffer"; + reg = <0x1d385000 (1600 * 1200 * 2)>; + width = <1600>; + height = <1200>; + stride = <(1600 * 2)>; + format = "r5g6b5"; + }; diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index ef9d06c9f8fd..0efedaad5165 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -191,9 +191,11 @@ Linux it will look something like this: }; The bootargs property contains the kernel arguments, and the initrd-* -properties define the address and size of an initrd blob. The -chosen node may also optionally contain an arbitrary number of -additional properties for platform-specific configuration data. +properties define the address and size of an initrd blob. Note that +initrd-end is the first address after the initrd image, so this doesn't +match the usual semantic of struct resource. The chosen node may also +optionally contain an arbitrary number of additional properties for +platform-specific configuration data. During early boot, the architecture setup code calls of_scan_flat_dt() several times with different helper callbacks to parse device tree diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt new file mode 100644 index 000000000000..279ac0a8c5b1 --- /dev/null +++ b/Documentation/dmatest.txt @@ -0,0 +1,81 @@ + DMA Test Guide + ============== + + Andy Shevchenko + +This small document introduces how to test DMA drivers using dmatest module. + + Part 1 - How to build the test module + +The menuconfig contains an option that could be found by following path: + Device Drivers -> DMA Engine support -> DMA Test client + +In the configuration file the option called CONFIG_DMATEST. The dmatest could +be built as module or inside kernel. Let's consider those cases. + + Part 2 - When dmatest is built as a module... + +After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest +folder with nodes will be created. They are the same as module parameters with +addition of the 'run' node that controls run and stop phases of the test. + +Note that in this case test will not run on load automatically. + +Example of usage: + % echo dma0chan0 > /sys/kernel/debug/dmatest/channel + % echo 2000 > /sys/kernel/debug/dmatest/timeout + % echo 1 > /sys/kernel/debug/dmatest/iterations + % echo 1 > /sys/kernel/debug/dmatest/run + +Hint: available channel list could be extracted by running the following +command: + % ls -1 /sys/class/dma/ + +After a while you will start to get messages about current status or error like +in the original code. + +Note that running a new test will stop any in progress test. + +The following command should return actual state of the test. + % cat /sys/kernel/debug/dmatest/run + +To wait for test done the user may perform a busy loop that checks the state. + + % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] + > do + > echo -n "." + > sleep 1 + > done + > echo + + Part 3 - When built-in in the kernel... + +The module parameters that is supplied to the kernel command line will be used +for the first performed test. After user gets a control, the test could be +interrupted or re-run with same or different parameters. For the details see +the above section "Part 2 - When dmatest is built as a module..." + +In both cases the module parameters are used as initial values for the test case. +You always could check them at run-time by running + % grep -H . /sys/module/dmatest/parameters/* + + Part 4 - Gathering the test results + +The module provides a storage for the test results in the memory. The gathered +data could be used after test is done. + +The special file 'results' in the debugfs represents gathered data of the in +progress test. The messages collected are printed to the kernel log as well. + +Example of output: + % cat /sys/kernel/debug/dmatest/results + dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) + +The message format is unified across the different types of errors. A number in +the parens represents additional information, e.g. error code, error counter, +or status. + +Comparison between buffers is stored to the dedicated structure. + +Note that the verify result is now accessible only via file 'results' in the +debugfs. diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index 7671352216f1..b349d57b76ea 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -1,8 +1,8 @@ - BTRFS - ===== +BTRFS +===== -Btrfs is a new copy on write filesystem for Linux aimed at +Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. Initially developed by Oracle, Btrfs is licensed under the GPL and open for contribution from anyone. @@ -34,9 +34,175 @@ The main Btrfs features include: * Online filesystem defragmentation +Mount Options +============= - MAILING LIST - ============ +When mounting a btrfs filesystem, the following option are accepted. +Unless otherwise specified, all options default to off. + + alloc_start= + Debugging option to force all block allocations above a certain + byte threshold on each block device. The value is specified in + bytes, optionally with a K, M, or G suffix, case insensitive. + Default is 1MB. + + autodefrag + Detect small random writes into files and queue them up for the + defrag process. Works best for small files; Not well suited for + large database workloads. + + check_int + check_int_data + check_int_print_mask= + These debugging options control the behavior of the integrity checking + module (the BTRFS_FS_CHECK_INTEGRITY config option required). + + check_int enables the integrity checker module, which examines all + block write requests to ensure on-disk consistency, at a large + memory and CPU cost. + + check_int_data includes extent data in the integrity checks, and + implies the check_int option. + + check_int_print_mask takes a bitmask of BTRFSIC_PRINT_MASK_* values + as defined in fs/btrfs/check-integrity.c, to control the integrity + checker module behavior. + + See comments at the top of fs/btrfs/check-integrity.c for more info. + + compress + compress= + compress-force + compress-force= + Control BTRFS file data compression. Type may be specified as "zlib" + "lzo" or "no" (for no compression, used for remounting). If no type + is specified, zlib is used. If compress-force is specified, + all files will be compressed, whether or not they compress well. + If compression is enabled, nodatacow and nodatasum are disabled. + + degraded + Allow mounts to continue with missing devices. A read-write mount may + fail with too many devices missing, for example if a stripe member + is completely missing. + + device= + Specify a device during mount so that ioctls on the control device + can be avoided. Especialy useful when trying to mount a multi-device + setup as root. May be specified multiple times for multiple devices. + + discard + Issue frequent commands to let the block device reclaim space freed by + the filesystem. This is useful for SSD devices, thinly provisioned + LUNs and virtual machine images, but may have a significant + performance impact. (The fstrim command is also available to + initiate batch trims from userspace). + + enospc_debug + Debugging option to be more verbose in some ENOSPC conditions. + + fatal_errors= + Action to take when encountering a fatal error: + "bug" - BUG() on a fatal error. This is the default. + "panic" - panic() on a fatal error. + + flushoncommit + The 'flushoncommit' mount option forces any data dirtied by a write in a + prior transaction to commit as part of the current commit. This makes + the committed state a fully consistent view of the file system from the + application's perspective (i.e., it includes all completed file system + operations). This was previously the behavior only when a snapshot is + created. + + inode_cache + Enable free inode number caching. Defaults to off due to an overflow + problem when the free space crcs don't fit inside a single page. + + max_inline= + Specify the maximum amount of space, in bytes, that can be inlined in + a metadata B-tree leaf. The value is specified in bytes, optionally + with a K, M, or G suffix, case insensitive. In practice, this value + is limited by the root sector size, with some space unavailable due + to leaf headers. For a 4k sectorsize, max inline data is ~3900 bytes. + + metadata_ratio= + Specify that 1 metadata chunk should be allocated after every + data chunks. Off by default. + + noacl + Disable support for Posix Access Control Lists (ACLs). See the + acl(5) manual page for more information about ACLs. + + nobarrier + Disables the use of block layer write barriers. Write barriers ensure + that certain IOs make it through the device cache and are on persistent + storage. If used on a device with a volatile (non-battery-backed) + write-back cache, this option will lead to filesystem corruption on a + system crash or power loss. + + nodatacow + Disable data copy-on-write for newly created files. Implies nodatasum, + and disables all compression. + + nodatasum + Disable data checksumming for newly created files. + + notreelog + Disable the tree logging used for fsync and O_SYNC writes. + + recovery + Enable autorecovery attempts if a bad tree root is found at mount time. + Currently this scans a list of several previous tree roots and tries to + use the first readable. + + skip_balance + Skip automatic resume of interrupted balance operation after mount. + May be resumed with "btrfs balance resume." + + space_cache (*) + Enable the on-disk freespace cache. + nospace_cache + Disable freespace cache loading without clearing the cache. + clear_cache + Force clearing and rebuilding of the disk space cache if something + has gone wrong. + + ssd + nossd + ssd_spread + Options to control ssd allocation schemes. By default, BTRFS will + enable or disable ssd allocation heuristics depending on whether a + rotational or nonrotational disk is in use. The ssd and nossd options + can override this autodetection. + + The ssd_spread mount option attempts to allocate into big chunks + of unused space, and may perform better on low-end ssds. ssd_spread + implies ssd, enabling all other ssd heuristics as well. + + subvol= + Mount subvolume at rather than the root subvolume. is + relative to the top level subvolume. + + subvolid= + Mount subvolume specified by an ID number rather than the root subvolume. + This allows mounting of subvolumes which are not in the root of the mounted + filesystem. + You can use "btrfs subvolume list" to see subvolume ID numbers. + + subvolrootid= (deprecated) + Mount subvolume specified by rather than the root subvolume. + This allows mounting of subvolumes which are not in the root of the mounted + filesystem. + You can use "btrfs subvolume show " to see the object ID for a subvolume. + + thread_pool= + The number of worker threads to allocate. The default number is equal + to the number of CPUs + 2, or 8, whichever is smaller. + + user_subvol_rm_allowed + Allow subvolumes to be deleted by a non-root user. Use with caution. + +MAILING LIST +============ There is a Btrfs mailing list hosted on vger.kernel.org. You can find details on how to subscribe here: @@ -49,8 +215,8 @@ http://dir.gmane.org/gmane.comp.file-systems.btrfs - IRC - === +IRC +=== Discussion of Btrfs also occurs on the #btrfs channel of the Freenode IRC network. diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index dcf338e62b71..bd3c56c67380 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -146,7 +146,7 @@ USAGE Format options -------------- --l [label] : Give a volume label, up to 256 unicode name. +-l [label] : Give a volume label, up to 512 unicode name. -a [0 or 1] : Split start location of each area for heap-based allocation. 1 is set by default, which performs this. -o [int] : Set overprovision ratio in percent over volume size. @@ -156,6 +156,8 @@ Format options -z [int] : Set the number of sections per zone. 1 is set by default. -e [str] : Set basic extension list. e.g. "mp3,gif,mov" +-t [0 or 1] : Disable discard command or not. + 1 is set by default, which conducts discard. ================================================================================ DESIGN diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 77a1d11af723..6f83fa965b4b 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -72,11 +72,11 @@ in this document, but drivers acting as clients to the GPIO interface must not care how it's implemented.) That said, if the convention is supported on their platform, drivers should -use it when possible. Platforms must declare GENERIC_GPIO support in their -Kconfig (boolean true), and provide an file. Drivers that can't -work without standard GPIO calls should have Kconfig entries which depend -on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as -optimized-away stubs, when drivers use the include file: +use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or +ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without +standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The +GPIO calls are available, either as "real code" or as optimized-away stubs, +when drivers use the include file: #include diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt index b8b77bbc784f..3f429ed8b3b8 100644 --- a/Documentation/kbuild/kconfig.txt +++ b/Documentation/kbuild/kconfig.txt @@ -89,6 +89,42 @@ These examples will disable most options (allnoconfig) but enable or disable the options that are explicitly listed in the specified mini-config files. +______________________________________________________________________ +Environment variables for 'randconfig' + +KCONFIG_SEED +-------------------------------------------------- +You can set this to the integer value used to seed the RNG, if you want +to somehow debug the behaviour of the kconfig parser/frontends. +If not set, the current time will be used. + +KCONFIG_PROBABILITY +-------------------------------------------------- +This variable can be used to skew the probabilities. This variable can +be unset or empty, or set to three different formats: + KCONFIG_PROBABILITY y:n split y:m:n split + ----------------------------------------------------------------- + unset or empty 50 : 50 33 : 33 : 34 + N N : 100-N N/2 : N/2 : 100-N + [1] N:M N+M : 100-(N+M) N : M : 100-(N+M) + [2] N:M:L N : 100-N M : L : 100-(M+L) + +where N, M and L are integers (in base 10) in the range [0,100], and so +that: + [1] N+M is in the range [0,100] + [2] M+L is in the range [0,100] + +Examples: + KCONFIG_PROBABILITY=10 + 10% of booleans will be set to 'y', 90% to 'n' + 5% of tristates will be set to 'y', 5% to 'm', 90% to 'n' + KCONFIG_PROBABILITY=15:25 + 40% of booleans will be set to 'y', 60% to 'n' + 15% of tristates will be set to 'y', 25% to 'm', 60% to 'n' + KCONFIG_PROBABILITY=10:15:15 + 10% of booleans will be set to 'y', 90% to 'n' + 15% of tristates will be set to 'y', 15% to 'm', 70% to 'n' + ______________________________________________________________________ Environment variables for 'silentoldconfig' diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 5198b742fde1..d567a7cc552b 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -593,7 +593,7 @@ more details, with real examples. Example: #Makefile - LDFLAGS_vmlinux += $(call really-ld-option, -X) + LDFLAGS_vmlinux += $(call ld-option, -X) === 4 Host Program support @@ -921,8 +921,9 @@ When kbuild executes, the following steps are followed (roughly): Often, the KBUILD_CFLAGS variable depends on the configuration. Example: - #arch/x86/Makefile - cflags-$(CONFIG_M386) += -march=i386 + #arch/x86/boot/compressed/Makefile + cflags-$(CONFIG_X86_32) := -march=i386 + cflags-$(CONFIG_X86_64) := -mcmodel=small KBUILD_CFLAGS += $(cflags-y) Many arch Makefiles dynamically run the target C compiler to diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8920f9f5fa9e..6e3b18a8afc6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1277,6 +1277,20 @@ bytes respectively. Such letter suffixes can also be entirely omitted. iucv= [HW,NET] + ivrs_ioapic [HW,X86_64] + Provide an override to the IOAPIC-ID<->DEVICE-ID + mapping provided in the IVRS ACPI table. For + example, to map IOAPIC-ID decimal 10 to + PCI device 00:14.0 write the parameter as: + ivrs_ioapic[10]=00:14.0 + + ivrs_hpet [HW,X86_64] + Provide an override to the HPET-ID<->DEVICE-ID + mapping provided in the IVRS ACPI table. For + example, to map HPET-ID decimal 0 to + PCI device 00:14.0 write the parameter as: + ivrs_hpet[0]=00:14.0 + js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. @@ -2991,6 +3005,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Force threading of all interrupt handlers except those marked explicitly IRQF_NO_THREAD. + tmem [KNL,XEN] + Enable the Transcendent memory driver if built-in. + + tmem.cleancache=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the cleancache + API to send anonymous pages to the hypervisor. + + tmem.frontswap=0|1 [KNL, XEN] + Default is on (1). Disable the usage of the frontswap + API to send swap pages to the hypervisor. If disabled + the selfballooning and selfshrinking are force disabled. + + tmem.selfballooning=0|1 [KNL, XEN] + Default is on (1). Disable the driving of swap pages + to the hypervisor. + + tmem.selfshrinking=0|1 [KNL, XEN] + Default is on (1). Partial swapoff that immediately + transfers pages from Xen hypervisor back to the + kernel based on different criteria. + topology= [S390] Format: {off | on} Specify if the kernel should make use of the cpu diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt new file mode 100644 index 000000000000..cbf7ae412da4 --- /dev/null +++ b/Documentation/kernel-per-CPU-kthreads.txt @@ -0,0 +1,202 @@ +REDUCING OS JITTER DUE TO PER-CPU KTHREADS + +This document lists per-CPU kthreads in the Linux kernel and presents +options to control their OS jitter. Note that non-per-CPU kthreads are +not listed here. To reduce OS jitter from non-per-CPU kthreads, bind +them to a "housekeeping" CPU dedicated to such work. + + +REFERENCES + +o Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. + +o Documentation/cgroups: Using cgroups to bind tasks to sets of CPUs. + +o man taskset: Using the taskset command to bind tasks to sets + of CPUs. + +o man sched_setaffinity: Using the sched_setaffinity() system + call to bind tasks to sets of CPUs. + +o /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state, + writing "0" to offline and "1" to online. + +o In order to locate kernel-generated OS jitter on CPU N: + + cd /sys/kernel/debug/tracing + echo 1 > max_graph_depth # Increase the "1" for more detail + echo function_graph > current_tracer + # run workload + cat per_cpu/cpuN/trace + + +KTHREADS + +Name: ehca_comp/%u +Purpose: Periodically process Infiniband-related work. +To reduce its OS jitter, do any of the following: +1. Don't use eHCA Infiniband hardware, instead choosing hardware + that does not require per-CPU kthreads. This will prevent these + kthreads from being created in the first place. (This will + work for most people, as this hardware, though important, is + relatively old and is produced in relatively low unit volumes.) +2. Do all eHCA-Infiniband-related work on other CPUs, including + interrupts. +3. Rework the eHCA driver so that its per-CPU kthreads are + provisioned only on selected CPUs. + + +Name: irq/%d-%s +Purpose: Handle threaded interrupts. +To reduce its OS jitter, do the following: +1. Use irq affinity to force the irq threads to execute on + some other CPU. + +Name: kcmtpd_ctr_%d +Purpose: Handle Bluetooth work. +To reduce its OS jitter, do one of the following: +1. Don't use Bluetooth, in which case these kthreads won't be + created in the first place. +2. Use irq affinity to force Bluetooth-related interrupts to + occur on some other CPU and furthermore initiate all + Bluetooth activity on some other CPU. + +Name: ksoftirqd/%u +Purpose: Execute softirq handlers when threaded or when under heavy load. +To reduce its OS jitter, each softirq vector must be handled +separately as follows: +TIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by forcing + both kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. After boot completes, force + the CPU offline, then bring it back online. This forces + recurring timers to migrate elsewhere. If you are concerned + with multiple CPUs, force them all offline before bringing the + first one back online. Once you have onlined the CPUs in question, + do not offline any other CPUs, because doing so could force the + timer back onto one of the CPUs in question. +NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following: +1. Force networking interrupts onto other CPUs. +2. Initiate any network I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +BLOCK_IOPOLL_SOFTIRQ: Do all of the following: +1. Force block-device interrupts onto some other CPU. +2. Initiate any block I/O and block-I/O polling on other CPUs. +3. Once your application has started, prevent CPU-hotplug operations + from being initiated from tasks that might run on the CPU to + be de-jittered. (It is OK to force this CPU offline and then + bring it back online before you start your application.) +TASKLET_SOFTIRQ: Do one or more of the following: +1. Avoid use of drivers that use tasklets. (Such drivers will contain + calls to things like tasklet_schedule().) +2. Convert all drivers that you must use from tasklets to workqueues. +3. Force interrupts for drivers using tasklets onto other CPUs, + and also do I/O involving these drivers on other CPUs. +SCHED_SOFTIRQ: Do all of the following: +1. Avoid sending scheduler IPIs to the CPU to be de-jittered, + for example, ensure that at most one runnable kthread is present + on that CPU. If a thread that expects to run on the de-jittered + CPU awakens, the scheduler will send an IPI that can result in + a subsequent SCHED_SOFTIRQ. +2. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using the + "nohz_full=" boot parameter. This reduces the number of + scheduler-clock interrupts that the de-jittered CPU receives, + minimizing its chances of being selected to do the load balancing + work that runs in SCHED_SOFTIRQ context. +3. To the extent possible, keep the CPU out of the kernel when it + is non-idle, for example, by avoiding system calls and by + forcing both kernel threads and interrupts to execute elsewhere. + This further reduces the number of scheduler-clock interrupts + received by the de-jittered CPU. +HRTIMER_SOFTIRQ: Do all of the following: +1. To the extent possible, keep the CPU out of the kernel when it + is non-idle. For example, avoid system calls and force both + kernel threads and interrupts to execute elsewhere. +2. Build with CONFIG_HOTPLUG_CPU=y. Once boot completes, force the + CPU offline, then bring it back online. This forces recurring + timers to migrate elsewhere. If you are concerned with multiple + CPUs, force them all offline before bringing the first one + back online. Once you have onlined the CPUs in question, do not + offline any other CPUs, because doing so could force the timer + back onto one of the CPUs in question. +RCU_SOFTIRQ: Do at least one of the following: +1. Offload callbacks and keep the CPU in either dyntick-idle or + adaptive-ticks state by doing all of the following: + a. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y, + CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU + to be de-jittered is marked as an adaptive-ticks CPU using + the "nohz_full=" boot parameter. Bind the rcuo kthreads + to housekeeping CPUs, which can tolerate OS jitter. + b. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. +2. Enable RCU to do its processing remotely via dyntick-idle by + doing all of the following: + a. Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y. + b. Ensure that the CPU goes idle frequently, allowing other + CPUs to detect that it has passed through an RCU quiescent + state. If the kernel is built with CONFIG_NO_HZ_FULL=y, + userspace execution also allows other CPUs to detect that + the CPU in question has passed through a quiescent state. + c. To the extent possible, keep the CPU out of the kernel + when it is non-idle, for example, by avoiding system + calls and by forcing both kernel threads and interrupts + to execute elsewhere. + +Name: rcuc/%u +Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels. +To reduce its OS jitter, do at least one of the following: +1. Build the kernel with CONFIG_PREEMPT=n. This prevents these + kthreads from being created in the first place, and also obviates + the need for RCU priority boosting. This approach is feasible + for workloads that do not require high degrees of responsiveness. +2. Build the kernel with CONFIG_RCU_BOOST=n. This prevents these + kthreads from being created in the first place. This approach + is feasible only if your workload never requires RCU priority + boosting, for example, if you ensure frequent idle time on all + CPUs that might execute within the kernel. +3. Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y, + which offloads all RCU callbacks to kthreads that can be moved + off of CPUs susceptible to OS jitter. This approach prevents the + rcuc/%u kthreads from having any work to do, so that they are + never awakened. +4. Ensure that the CPU never enters the kernel, and, in particular, + avoid initiating any CPU hotplug operations on this CPU. This is + another way of preventing any callbacks from being queued on the + CPU, again preventing the rcuc/%u kthreads from having any work + to do. + +Name: rcuob/%d, rcuop/%d, and rcuos/%d +Purpose: Offload RCU callbacks from the corresponding CPU. +To reduce its OS jitter, do at least one of the following: +1. Use affinity, cgroups, or other mechanism to force these kthreads + to execute on some other CPU. +2. Build with CONFIG_RCU_NOCB_CPUS=n, which will prevent these + kthreads from being created in the first place. However, please + note that this will not eliminate OS jitter, but will instead + shift it to RCU_SOFTIRQ. + +Name: watchdog/%u +Purpose: Detect software lockups on each CPU. +To reduce its OS jitter, do at least one of the following: +1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these + kthreads from being created in the first place. +2. Echo a zero to /proc/sys/kernel/watchdog to disable the + watchdog timer. +3. Echo a large number of /proc/sys/kernel/watchdog_thresh in + order to reduce the frequency of OS jitter due to the watchdog + timer down to a level that is acceptable for your workload. diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX index 5246090ef15c..1ecd1596633e 100644 --- a/Documentation/leds/00-INDEX +++ b/Documentation/leds/00-INDEX @@ -6,6 +6,8 @@ leds-lp5521.txt - notes on how to use the leds-lp5521 driver. leds-lp5523.txt - notes on how to use the leds-lp5523 driver. +leds-lp5562.txt + - notes on how to use the leds-lp5562 driver. leds-lp55xx.txt - description about lp55xx common driver. leds-lm3556.txt diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt index 270f57196339..79e4c2e6e5e8 100644 --- a/Documentation/leds/leds-lp5521.txt +++ b/Documentation/leds/leds-lp5521.txt @@ -81,22 +81,3 @@ static struct lp55xx_platform_data lp5521_platform_data = { If the current is set to 0 in the platform data, that channel is disabled and it is not visible in the sysfs. - -The 'update_config' : CONFIG register (ADDR 08h) -This value is platform-specific data. -If update_config is not defined, the CONFIG register is set with -'LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'. -(Enable auto-powersave, set charge pump to auto, red to battery) - -example of update_config : - -#define LP5521_CONFIGS (LP5521_PWM_HF | LP5521_PWRSAVE_EN | \ - LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT | \ - LP5521_CLK_INT) - -static struct lp55xx_platform_data lp5521_pdata = { - .led_config = lp5521_led_config, - .num_channels = ARRAY_SIZE(lp5521_led_config), - .clock_mode = LP55XX_CLOCK_INT, - .update_config = LP5521_CONFIGS, -}; diff --git a/Documentation/leds/leds-lp5562.txt b/Documentation/leds/leds-lp5562.txt new file mode 100644 index 000000000000..5a823ff6b393 --- /dev/null +++ b/Documentation/leds/leds-lp5562.txt @@ -0,0 +1,120 @@ +Kernel driver for LP5562 +======================== + +* TI LP5562 LED Driver + +Author: Milo(Woogyom) Kim + +Description + + LP5562 can drive up to 4 channels. R/G/B and White. + LEDs can be controlled directly via the led class control interface. + + All four channels can be also controlled using the engine micro programs. + LP5562 has the internal program memory for running various LED patterns. + For the details, please refer to 'firmware' section in leds-lp55xx.txt + +Device attribute: engine_mux + + 3 Engines are allocated in LP5562, but the number of channel is 4. + Therefore each channel should be mapped to the engine number. + Value : RGB or W + + This attribute is used for programming LED data with the firmware interface. + Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux, + so additional sysfs is required. + + LED Map + Red ... Engine 1 (fixed) + Green ... Engine 2 (fixed) + Blue ... Engine 3 (fixed) + White ... Engine 1 or 2 or 3 (selective) + +How to load the program data using engine_mux + + Before loading the LP5562 program data, engine_mux should be written between + the engine selection and loading the firmware. + Engine mux has two different mode, RGB and W. + RGB is used for loading RGB program data, W is used for W program data. + + For example, run blinking green channel pattern, + echo 2 > /sys/bus/i2c/devices/xxxx/select_engine # 2 is for green channel + echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux # engine mux for RGB + echo 1 > /sys/class/firmware/lp5562/loading + echo "4000600040FF6000" > /sys/class/firmware/lp5562/data + echo 0 > /sys/class/firmware/lp5562/loading + echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + + To run a blinking white pattern, + echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine + echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux + echo 1 > /sys/class/firmware/lp5562/loading + echo "4000600040FF6000" > /sys/class/firmware/lp5562/data + echo 0 > /sys/class/firmware/lp5562/loading + echo 1 > /sys/bus/i2c/devices/xxxx/run_engine + +How to load the predefined patterns + + Please refer to 'leds-lp55xx.txt" + +Setting Current of Each Channel + + Like LP5521 and LP5523/55231, LP5562 provides LED current settings. + The 'led_current' and 'max_current' are used. + +(Example of Platform data) + +To configure the platform specific data, lp55xx_platform_data structure is used. + +static struct lp55xx_led_config lp5562_led_config[] = { + { + .name = "R", + .chan_nr = 0, + .led_current = 20, + .max_current = 40, + }, + { + .name = "G", + .chan_nr = 1, + .led_current = 20, + .max_current = 40, + }, + { + .name = "B", + .chan_nr = 2, + .led_current = 20, + .max_current = 40, + }, + { + .name = "W", + .chan_nr = 3, + .led_current = 20, + .max_current = 40, + }, +}; + +static int lp5562_setup(void) +{ + /* setup HW resources */ +} + +static void lp5562_release(void) +{ + /* Release HW resources */ +} + +static void lp5562_enable(bool state) +{ + /* Control of chip enable signal */ +} + +static struct lp55xx_platform_data lp5562_platform_data = { + .led_config = lp5562_led_config, + .num_channels = ARRAY_SIZE(lp5562_led_config), + .setup_resources = lp5562_setup, + .release_resources = lp5562_release, + .enable = lp5562_enable, +}; + +If the current is set to 0 in the platform data, that channel is +disabled and it is not visible in the sysfs. diff --git a/Documentation/leds/leds-lp55xx.txt b/Documentation/leds/leds-lp55xx.txt index ced41868d2d1..eec8fa2ffe4e 100644 --- a/Documentation/leds/leds-lp55xx.txt +++ b/Documentation/leds/leds-lp55xx.txt @@ -5,7 +5,7 @@ Authors: Milo(Woogyom) Kim Description ----------- -LP5521, LP5523/55231 have common features as below. +LP5521, LP5523/55231 and LP5562 have common features as below. Register access via the I2C Device initialization/deinitialization @@ -116,3 +116,47 @@ To support this, 'run_engine' and 'firmware_cb' are configurable in each driver. run_engine : Control the selected engine firmware_cb : The callback function after loading the firmware is done. Chip specific commands for loading and updating program memory. + +( Predefined pattern data ) + +Without the firmware interface, LP55xx driver provides another method for +loading a LED pattern. That is 'predefined' pattern. +A predefined pattern is defined in the platform data and load it(or them) +via the sysfs if needed. +To use the predefined pattern concept, 'patterns' and 'num_patterns' should be +configured. + + Example of predefined pattern data: + + /* mode_1: blinking data */ + static const u8 mode_1[] = { + 0x40, 0x00, 0x60, 0x00, 0x40, 0xFF, 0x60, 0x00, + }; + + /* mode_2: always on */ + static const u8 mode_2[] = { 0x40, 0xFF, }; + + struct lp55xx_predef_pattern board_led_patterns[] = { + { + .r = mode_1, + .size_r = ARRAY_SIZE(mode_1), + }, + { + .b = mode_2, + .size_b = ARRAY_SIZE(mode_2), + }, + } + + struct lp55xx_platform_data lp5562_pdata = { + ... + .patterns = board_led_patterns, + .num_patterns = ARRAY_SIZE(board_led_patterns), + }; + +Then, mode_1 and mode_2 can be run via through the sysfs. + + echo 1 > /sys/bus/i2c/devices/xxxx/led_pattern # red blinking LED pattern + echo 2 > /sys/bus/i2c/devices/xxxx/led_pattern # blue LED always on + +To stop running pattern, + echo 0 > /sys/bus/i2c/devices/xxxx/led_pattern diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 504dfe4d52eb..a66c9821b5ce 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -268,7 +268,7 @@ situations. System Power Management Phases ------------------------------ Suspending or resuming the system is done in several phases. Different phases -are used for standby or memory sleep states ("suspend-to-RAM") and the +are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the hibernation state ("suspend-to-disk"). Each phase involves executing callbacks for every device before the next phase begins. Not all busses or classes support all these callbacks and not all drivers use all the callbacks. The @@ -309,7 +309,8 @@ execute the corresponding method from dev->driver->pm instead if there is one. Entering System Suspend ----------------------- -When the system goes into the standby or memory sleep state, the phases are: +When the system goes into the freeze, standby or memory sleep state, +the phases are: prepare, suspend, suspend_late, suspend_noirq. @@ -368,7 +369,7 @@ the devices that were suspended. Leaving System Suspend ---------------------- -When resuming from standby or memory sleep, the phases are: +When resuming from freeze, standby or memory sleep, the phases are: resume_noirq, resume_early, resume, complete. @@ -433,8 +434,8 @@ the system log. Entering Hibernation -------------------- -Hibernating the system is more complicated than putting it into the standby or -memory sleep state, because it involves creating and saving a system image. +Hibernating the system is more complicated than putting it into the other +sleep states, because it involves creating and saving a system image. Therefore there are more phases for hibernation, with a different set of callbacks. These phases always run after tasks have been frozen and memory has been freed. @@ -485,8 +486,8 @@ image forms an atomic snapshot of the system state. At this point the system image is saved, and the devices then need to be prepared for the upcoming system shutdown. This is much like suspending them -before putting the system into the standby or memory sleep state, and the phases -are similar. +before putting the system into the freeze, standby or memory sleep state, +and the phases are similar. 9. The prepare phase is discussed above. diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index c537834af005..f1f0f59a7c47 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -7,8 +7,8 @@ running. The interface exists in /sys/power/ directory (assuming sysfs is mounted at /sys). /sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'standby' -(Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' +returns what states are supported, which is hard-coded to 'freeze', +'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' (Suspend-to-Disk). Writing to this file one of those strings causes the system to diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt index c2a4a346c0d9..a81fa254303d 100644 --- a/Documentation/power/notifiers.txt +++ b/Documentation/power/notifiers.txt @@ -15,8 +15,10 @@ A suspend/hibernation notifier may be used for this purpose. The subsystems or drivers having such needs can register suspend notifiers that will be called upon the following events by the PM core: -PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will - be frozen immediately. +PM_HIBERNATION_PREPARE The system is going to hibernate, tasks will be frozen + immediately. This is different from PM_SUSPEND_PREPARE + below because here we do additional work between notifiers + and drivers freezing. PM_POST_HIBERNATION The system memory state has been restored from a hibernation image or an error occurred during diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 4416b28630df..442d43df9b25 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -2,12 +2,26 @@ System Power Management States -The kernel supports three power management states generically, though -each is dependent on platform support code to implement the low-level -details for each state. This file describes each state, what they are +The kernel supports four power management states generically, though +one is generic and the other three are dependent on platform support +code to implement the low-level details for each state. +This file describes each state, what they are commonly called, what ACPI state they map to, and what string to write to /sys/power/state to enter that state +state: Freeze / Low-Power Idle +ACPI state: S0 +String: "freeze" + +This state is a generic, pure software, light-weight, low-power state. +It allows more energy to be saved relative to idle by freezing user +space and putting all I/O devices into low-power states (possibly +lower-power than available at run time), such that the processors can +spend more time in their idle states. +This state can be used for platforms without Standby/Suspend-to-RAM +support, or it can be used in addition to Suspend-to-RAM (memory sleep) +to provide reduced resume latency. + State: Standby / Power-On Suspend ACPI State: S1 @@ -22,9 +36,6 @@ We try to put devices in a low-power state equivalent to D1, which also offers low power savings, but low resume latency. Not all devices support D1, and those that don't are left on. -A transition from Standby to the On state should take about 1-2 -seconds. - State: Suspend-to-RAM ACPI State: S3 @@ -42,9 +53,6 @@ transition back to the On state. For at least ACPI, STR requires some minimal boot-strapping code to resume the system from STR. This may be true on other platforms. -A transition from Suspend-to-RAM to the On state should take about -3-5 seconds. - State: Suspend-to-disk ACPI State: S4 @@ -74,7 +82,3 @@ low-power state (like ACPI S4), or it may simply power down. Powering down offers greater savings, and allows this mechanism to work on any system. However, entering a real low-power state allows the user to trigger wake up events (e.g. pressing a key or opening a laptop lid). - -A transition from Suspend-to-Disk to the On state should take about 30 -seconds, though it's typically a bit more with the current -implementation. diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index c75694b35d08..a9c16c979da2 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network. In order to initialize the RapidIO subsystem, a platform must initialize and register at least one master port within the RapidIO network. To register mport within the subsystem controller driver initialization code calls function -rio_register_mport() for each available master port. After all active master -ports are registered with a RapidIO subsystem, the rio_init_mports() routine -is called to perform enumeration and discovery. +rio_register_mport() for each available master port. -In the current PowerPC-based implementation a subsys_initcall() is specified to -perform controller initialization and mport registration. At the end it directly -calls rio_init_mports() to execute RapidIO enumeration and discovery. +RapidIO subsystem uses subsys_initcall() or device_initcall() to perform +controller initialization (depending on controller device type). + +After all active master ports are registered with a RapidIO subsystem, +an enumeration and/or discovery routine may be called automatically or +by user-space command. 4. Enumeration and Discovery ---------------------------- -When rio_init_mports() is called it scans a list of registered master ports and -calls an enumeration or discovery routine depending on the configured role of a -master port: host or agent. +4.1 Overview +------------ + +RapidIO subsystem configuration options allow users to specify enumeration and +discovery methods as statically linked components or loadable modules. +An enumeration/discovery method implementation and available input parameters +define how any given method can be attached to available RapidIO mports: +simply to all available mports OR individually to the specified mport device. + +Depending on selected enumeration/discovery build configuration, there are +several methods to initiate an enumeration and/or discovery process: + + (a) Statically linked enumeration and discovery process can be started + automatically during kernel initialization time using corresponding module + parameters. This was the original method used since introduction of RapidIO + subsystem. Now this method relies on enumerator module parameter which is + 'rio-scan.scan' for existing basic enumeration/discovery method. + When automatic start of enumeration/discovery is used a user has to ensure + that all discovering endpoints are started before the enumerating endpoint + and are waiting for enumeration to be completed. + Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering + endpoint waits for enumeration to be completed. If the specified timeout + expires the discovery process is terminated without obtaining RapidIO network + information. NOTE: a timed out discovery process may be restarted later using + a user-space command as it is described later if the given endpoint was + enumerated successfully. + + (b) Statically linked enumeration and discovery process can be started by + a command from user space. This initiation method provides more flexibility + for a system startup compared to the option (a) above. After all participating + endpoints have been successfully booted, an enumeration process shall be + started first by issuing a user-space command, after an enumeration is + completed a discovery process can be started on all remaining endpoints. + + (c) Modular enumeration and discovery process can be started by a command from + user space. After an enumeration/discovery module is loaded, a network scan + process can be started by issuing a user-space command. + Similar to the option (b) above, an enumerator has to be started first. + + (d) Modular enumeration and discovery process can be started by a module + initialization routine. In this case an enumerating module shall be loaded + first. + +When a network scan process is started it calls an enumeration or discovery +routine depending on the configured role of a master port: host or agent. Enumeration is performed by a master port if it is configured as a host port by assigning a host device ID greater than or equal to zero. A host device ID is @@ -104,8 +147,58 @@ for it. The enumeration and discovery routines use RapidIO maintenance transactions to access the configuration space of devices. -The enumeration process is implemented according to the enumeration algorithm -outlined in the RapidIO Interconnect Specification: Annex I [1]. +4.2 Automatic Start of Enumeration and Discovery +------------------------------------------------ + +Automatic enumeration/discovery start method is applicable only to built-in +enumeration/discovery RapidIO configuration selection. To enable automatic +enumeration/discovery start by existing basic enumerator method set use boot +command line parameter "rio-scan.scan=1". + +This configuration requires synchronized start of all RapidIO endpoints that +form a network which will be enumerated/discovered. Discovering endpoints have +to be started before an enumeration starts to ensure that all RapidIO +controllers have been initialized and are ready to be discovered. Configuration +parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which +a discovering endpoint will wait for enumeration to be completed. + +When automatic enumeration/discovery start is selected, basic method's +initialization routine calls rio_init_mports() to perform enumeration or +discovery for all known mport devices. + +Depending on RapidIO network size and configuration this automatic +enumeration/discovery start method may be difficult to use due to the +requirement for synchronized start of all endpoints. + +4.3 User-space Start of Enumeration and Discovery +------------------------------------------------- + +User-space start of enumeration and discovery can be used with built-in and +modular build configurations. For user-space controlled start RapidIO subsystem +creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate +an enumeration or discovery process on specific mport device, a user needs to +write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a +sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device +registration. For example for machine with single RapidIO controller, mport_ID +for that controller always will be 0. + +To initiate RapidIO enumeration/discovery on all available mports a user may +write '-1' (or RIO_MPORT_ANY) into the scan attribute file. + +4.4 Basic Enumeration Method +---------------------------- + +This is an original enumeration/discovery method which is available since +first release of RapidIO subsystem code. The enumeration process is +implemented according to the enumeration algorithm outlined in the RapidIO +Interconnect Specification: Annex I [1]. + +This method can be configured as statically linked or loadable module. +The method's single parameter "scan" allows to trigger the enumeration/discovery +process from module initialization routine. + +This enumeration/discovery method can be started only once and does not support +unloading if it is built as a module. The enumeration process traverses the network using a recursive depth-first algorithm. When a new device is found, the enumerator takes ownership of that @@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed, an agent skips RapidIO discovery and continues with remaining kernel initialization. +4.5 Adding New Enumeration/Discovery Method +------------------------------------------- + +RapidIO subsystem code organization allows addition of new enumeration/discovery +methods as new configuration options without significant impact to to the core +RapidIO code. + +A new enumeration/discovery method has to be attached to one or more mport +devices before an enumeration/discovery process can be started. Normally, +method's module initialization routine calls rio_register_scan() to attach +an enumerator to a specified mport device (or devices). The basic enumerator +implementation demonstrates this process. + 5. References ------------- diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt index 97f71ce575d6..19878179da4c 100644 --- a/Documentation/rapidio/sysfs.txt +++ b/Documentation/rapidio/sysfs.txt @@ -88,3 +88,20 @@ that exports additional attributes. IDT_GEN2: errlog - reads contents of device error log until it is empty. + + +5. RapidIO Bus Attributes +------------------------- + +RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific +attribute: + + scan - allows to trigger enumeration discovery process from user space. This + is a write-only attribute. To initiate an enumeration or discovery + process on specific mport device, a user needs to write mport_ID (not + RapidIO destination ID) into this file. The mport_ID is a sequential + number (0 ... RIO_MAX_MPORTS) assigned to the mport device. + For example, for a machine with a single RapidIO controller, mport_ID + for that controller always will be 0. + To initiate RapidIO enumeration/discovery on all available mports + a user must write '-1' (or RIO_MPORT_ANY) into this attribute file. diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO index d378cba66456..6e0f63f343b4 100644 --- a/Documentation/s390/CommonIO +++ b/Documentation/s390/CommonIO @@ -8,9 +8,9 @@ Command line parameters Enable logging of debug information in case of ccw device timeouts. -* cio_ignore = {all} | - { | } | - {! | !} +* cio_ignore = device[,device[,..]] + + device := {all | [!]ipldev | [!]condev | [!] | [!]-} The given devices will be ignored by the common I/O-layer; no detection and device sensing will be done on any of those devices. The subchannel to @@ -24,8 +24,10 @@ Command line parameters device numbers (0xabcd or abcd, for 2.4 backward compatibility). If you give a device number 0xabcd, it will be interpreted as 0.0.abcd. - You can use the 'all' keyword to ignore all devices. - The '!' operator will cause the I/O-layer to _not_ ignore a device. + You can use the 'all' keyword to ignore all devices. The 'ipldev' and 'condev' + keywords can be used to refer to the CCW based boot device and CCW console + device respectively (these are probably useful only when combined with the '!' + operator). The '!' operator will cause the I/O-layer to _not_ ignore a device. The command line is parsed from left to right. For example, diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation index b73bbfb697bb..36a3e79c1203 100644 --- a/Documentation/thermal/exynos_thermal_emulation +++ b/Documentation/thermal/exynos_thermal_emulation @@ -13,11 +13,11 @@ Thermal emulation mode supports software debug for TMU's operation. User can set manually with software code and TMU will read current temperature from user value not from sensor's value. -Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available. -When it's enabled, sysfs node will be created under -/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'. +Enabling CONFIG_THERMAL_EMULATION option will make this support available. +When it's enabled, sysfs node will be created as +/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp. -The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any +The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any temperature you want to update to sysfs node, it automatically enable emulation mode and current temperature will be changed into it. (Exynos also supports user changable delay time which would be used to delay of diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 6859661c9d31..a71bd5b90fe8 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -31,15 +31,17 @@ temperature) and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *type, int trips, int mask, void *devdata, - struct thermal_zone_device_ops *ops) + struct thermal_zone_device_ops *ops, + const struct thermal_zone_params *tzp, + int passive_delay, int polling_delay)) This interface function adds a new thermal zone device (sensor) to /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the thermal cooling devices registered at the same time. - name: the thermal zone name. + type: the thermal zone type. trips: the total number of trip points this thermal zone supports. mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable. devdata: device private data @@ -57,6 +59,12 @@ temperature) and throttle appropriate devices. will be fired. .set_emul_temp: set the emulation temperature which helps in debugging different threshold temperature points. + tzp: thermal zone platform parameters. + passive_delay: number of milliseconds to wait between polls when + performing passive cooling. + polling_delay: number of milliseconds to wait between polls when checking + whether trip points have been crossed (0 for interrupt driven systems). + 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) @@ -265,6 +273,10 @@ emul_temp Unit: millidegree Celsius WO, Optional + WARNING: Be careful while enabling this option on production systems, + because userland can easily disable the thermal policy by simply + flooding this sysfs node with low temperature values. + ***************************** * Cooling device attributes * ***************************** @@ -363,7 +375,7 @@ This function returns the thermal_instance corresponding to a given {thermal_zone, cooling_device, trip_point} combination. Returns NULL if such an instance does not exist. -5.3:notify_thermal_framework: +5.3:thermal_notify_framework: This function handles the trip events from sensor drivers. It starts throttling the cooling devices according to the policy configured. For CRITICAL and HOT trip points, this notifies the respective drivers, @@ -375,11 +387,3 @@ platform data is provided, this uses the step_wise throttling policy. This function serves as an arbitrator to set the state of a cooling device. It sets the cooling device to the deepest cooling state if possible. - -5.5:thermal_register_governor: -This function lets the various thermal governors to register themselves -with the Thermal framework. At run time, depending on a zone's platform -data, a particular governor is used for throttling. - -5.6:thermal_unregister_governor: -This function unregisters a governor from the thermal framework. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 119358dfb742..5f91eda91647 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1486,15 +1486,23 @@ struct kvm_ioeventfd { __u8 pad[36]; }; +For the special case of virtio-ccw devices on s390, the ioevent is matched +to a subchannel/virtqueue tuple instead. + The following flags are defined: #define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) #define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) #define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) +#define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ + (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) If datamatch flag is set, the event will be signaled only if the written value to the registered address is equal to datamatch in struct kvm_ioeventfd. +For virtio-ccw devices, addr contains the subchannel id and datamatch the +virtqueue index. + 4.60 KVM_DIRTY_TLB @@ -1780,27 +1788,48 @@ registers, find a list below: PPC | KVM_REG_PPC_VPA_DTL | 128 PPC | KVM_REG_PPC_EPCR | 32 PPC | KVM_REG_PPC_EPR | 32 + PPC | KVM_REG_PPC_TCR | 32 + PPC | KVM_REG_PPC_TSR | 32 + PPC | KVM_REG_PPC_OR_TSR | 32 + PPC | KVM_REG_PPC_CLEAR_TSR | 32 + PPC | KVM_REG_PPC_MAS0 | 32 + PPC | KVM_REG_PPC_MAS1 | 32 + PPC | KVM_REG_PPC_MAS2 | 64 + PPC | KVM_REG_PPC_MAS7_3 | 64 + PPC | KVM_REG_PPC_MAS4 | 32 + PPC | KVM_REG_PPC_MAS6 | 32 + PPC | KVM_REG_PPC_MMUCFG | 32 + PPC | KVM_REG_PPC_TLB0CFG | 32 + PPC | KVM_REG_PPC_TLB1CFG | 32 + PPC | KVM_REG_PPC_TLB2CFG | 32 + PPC | KVM_REG_PPC_TLB3CFG | 32 + PPC | KVM_REG_PPC_TLB0PS | 32 + PPC | KVM_REG_PPC_TLB1PS | 32 + PPC | KVM_REG_PPC_TLB2PS | 32 + PPC | KVM_REG_PPC_TLB3PS | 32 + PPC | KVM_REG_PPC_EPTCFG | 32 + PPC | KVM_REG_PPC_ICP_STATE | 64 ARM registers are mapped using the lower 32 bits. The upper 16 of that is the register group type, or coprocessor number: ARM core registers have the following id bit patterns: - 0x4002 0000 0010 + 0x4020 0000 0010 ARM 32-bit CP15 registers have the following id bit patterns: - 0x4002 0000 000F + 0x4020 0000 000F ARM 64-bit CP15 registers have the following id bit patterns: - 0x4003 0000 000F + 0x4030 0000 000F ARM CCSIDR registers are demultiplexed by CSSELR value: - 0x4002 0000 0011 00 + 0x4020 0000 0011 00 ARM 32-bit VFP control registers have the following id bit patterns: - 0x4002 0000 0012 1 + 0x4020 0000 0012 1 ARM 64-bit FP registers have the following id bit patterns: - 0x4002 0000 0012 0 + 0x4030 0000 0012 0 4.69 KVM_GET_ONE_REG @@ -2161,6 +2190,76 @@ header; first `n_valid' valid entries with contents from the data written, then `n_invalid' invalid entries, invalidating any previously valid entries found. +4.79 KVM_CREATE_DEVICE + +Capability: KVM_CAP_DEVICE_CTRL +Type: vm ioctl +Parameters: struct kvm_create_device (in/out) +Returns: 0 on success, -1 on error +Errors: + ENODEV: The device type is unknown or unsupported + EEXIST: Device already created, and this type of device may not + be instantiated multiple times + + Other error conditions may be defined by individual device types or + have their standard meanings. + +Creates an emulated device in the kernel. The file descriptor returned +in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR. + +If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the +device type is supported (not necessarily whether it can be created +in the current vm). + +Individual devices should not define flags. Attributes should be used +for specifying any behavior that is not implied by the device type +number. + +struct kvm_create_device { + __u32 type; /* in: KVM_DEV_TYPE_xxx */ + __u32 fd; /* out: device handle */ + __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ +}; + +4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR + +Capability: KVM_CAP_DEVICE_CTRL +Type: device ioctl +Parameters: struct kvm_device_attr +Returns: 0 on success, -1 on error +Errors: + ENXIO: The group or attribute is unknown/unsupported for this device + EPERM: The attribute cannot (currently) be accessed this way + (e.g. read-only attribute, or attribute that only makes + sense when the device is in a different state) + + Other error conditions may be defined by individual device types. + +Gets/sets a specified piece of device configuration and/or state. The +semantics are device-specific. See individual device documentation in +the "devices" directory. As with ONE_REG, the size of the data +transferred is defined by the particular attribute. + +struct kvm_device_attr { + __u32 flags; /* no flags currently defined */ + __u32 group; /* device-defined */ + __u64 attr; /* group-defined */ + __u64 addr; /* userspace address of attr data */ +}; + +4.81 KVM_HAS_DEVICE_ATTR + +Capability: KVM_CAP_DEVICE_CTRL +Type: device ioctl +Parameters: struct kvm_device_attr +Returns: 0 on success, -1 on error +Errors: + ENXIO: The group or attribute is unknown/unsupported for this device + +Tests whether a device supports a particular attribute. A successful +return indicates the attribute is implemented. It does not necessarily +indicate that the attribute can be read or written in the device's +current state. "addr" is ignored. 4.77 KVM_ARM_VCPU_INIT @@ -2243,6 +2342,25 @@ and distributor interface, the ioctl must be called after calling KVM_CREATE_IRQCHIP, but before calling KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the base addresses will return -EEXIST. +4.82 KVM_PPC_RTAS_DEFINE_TOKEN + +Capability: KVM_CAP_PPC_RTAS +Architectures: ppc +Type: vm ioctl +Parameters: struct kvm_rtas_token_args +Returns: 0 on success, -1 on error + +Defines a token value for a RTAS (Run Time Abstraction Services) +service in order to allow it to be handled in the kernel. The +argument struct gives the name of the service, which must be the name +of a service that has a kernel-side implementation. If the token +value is non-zero, it will be associated with that service, and +subsequent RTAS calls by the guest specifying that token will be +handled by the kernel. If the token value is 0, then any token +associated with the service will be forgotten, and subsequent RTAS +calls by the guest for that service will be passed to userspace to be +handled. + 5. The kvm_run structure ------------------------ @@ -2646,3 +2764,19 @@ to receive the topmost interrupt vector. When disabled (args[0] == 0), behavior is as if this facility is unsupported. When this capability is enabled, KVM_EXIT_EPR can occur. + +6.6 KVM_CAP_IRQ_MPIC + +Architectures: ppc +Parameters: args[0] is the MPIC device fd + args[1] is the MPIC CPU number for this vcpu + +This capability connects the vcpu to an in-kernel MPIC device. + +6.7 KVM_CAP_IRQ_XICS + +Architectures: ppc +Parameters: args[0] is the XICS device fd + args[1] is the XICS CPU number (server ID) for this vcpu + +This capability connects the vcpu to an in-kernel XICS device. diff --git a/Documentation/virtual/kvm/devices/README b/Documentation/virtual/kvm/devices/README new file mode 100644 index 000000000000..34a69834124a --- /dev/null +++ b/Documentation/virtual/kvm/devices/README @@ -0,0 +1 @@ +This directory contains specific device bindings for KVM_CAP_DEVICE_CTRL. diff --git a/Documentation/virtual/kvm/devices/mpic.txt b/Documentation/virtual/kvm/devices/mpic.txt new file mode 100644 index 000000000000..8257397adc3c --- /dev/null +++ b/Documentation/virtual/kvm/devices/mpic.txt @@ -0,0 +1,53 @@ +MPIC interrupt controller +========================= + +Device types supported: + KVM_DEV_TYPE_FSL_MPIC_20 Freescale MPIC v2.0 + KVM_DEV_TYPE_FSL_MPIC_42 Freescale MPIC v4.2 + +Only one MPIC instance, of any type, may be instantiated. The created +MPIC will act as the system interrupt controller, connecting to each +vcpu's interrupt inputs. + +Groups: + KVM_DEV_MPIC_GRP_MISC + Attributes: + KVM_DEV_MPIC_BASE_ADDR (rw, 64-bit) + Base address of the 256 KiB MPIC register space. Must be + naturally aligned. A value of zero disables the mapping. + Reset value is zero. + + KVM_DEV_MPIC_GRP_REGISTER (rw, 32-bit) + Access an MPIC register, as if the access were made from the guest. + "attr" is the byte offset into the MPIC register space. Accesses + must be 4-byte aligned. + + MSIs may be signaled by using this attribute group to write + to the relevant MSIIR. + + KVM_DEV_MPIC_GRP_IRQ_ACTIVE (rw, 32-bit) + IRQ input line for each standard openpic source. 0 is inactive and 1 + is active, regardless of interrupt sense. + + For edge-triggered interrupts: Writing 1 is considered an activating + edge, and writing 0 is ignored. Reading returns 1 if a previously + signaled edge has not been acknowledged, and 0 otherwise. + + "attr" is the IRQ number. IRQ numbers for standard sources are the + byte offset of the relevant IVPR from EIVPR0, divided by 32. + +IRQ Routing: + + The MPIC emulation supports IRQ routing. Only a single MPIC device can + be instantiated. Once that device has been created, it's available as + irqchip id 0. + + This irqchip 0 has 256 interrupt pins, which expose the interrupts in + the main array of interrupt sources (a.k.a. "SRC" interrupts). + + The numbering is the same as the MPIC device tree binding -- based on + the register offset from the beginning of the sources array, without + regard to any subdivisions in chip documentation such as "internal" + or "external" interrupts. + + Access to non-SRC interrupts is not implemented through IRQ routing mechanisms. diff --git a/Documentation/virtual/kvm/devices/xics.txt b/Documentation/virtual/kvm/devices/xics.txt new file mode 100644 index 000000000000..42864935ac5d --- /dev/null +++ b/Documentation/virtual/kvm/devices/xics.txt @@ -0,0 +1,66 @@ +XICS interrupt controller + +Device type supported: KVM_DEV_TYPE_XICS + +Groups: + KVM_DEV_XICS_SOURCES + Attributes: One per interrupt source, indexed by the source number. + +This device emulates the XICS (eXternal Interrupt Controller +Specification) defined in PAPR. The XICS has a set of interrupt +sources, each identified by a 20-bit source number, and a set of +Interrupt Control Presentation (ICP) entities, also called "servers", +each associated with a virtual CPU. + +The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH +capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and +the interrupt server number (i.e. the vcpu number from the XICS's +point of view) in args[1] of the kvm_enable_cap struct. Each ICP has +64 bits of state which can be read and written using the +KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu. The 64 bit +state word has the following bitfields, starting at the +least-significant end of the word: + +* Unused, 16 bits + +* Pending interrupt priority, 8 bits + Zero is the highest priority, 255 means no interrupt is pending. + +* Pending IPI (inter-processor interrupt) priority, 8 bits + Zero is the highest priority, 255 means no IPI is pending. + +* Pending interrupt source number, 24 bits + Zero means no interrupt pending, 2 means an IPI is pending + +* Current processor priority, 8 bits + Zero is the highest priority, meaning no interrupts can be + delivered, and 255 is the lowest priority. + +Each source has 64 bits of state that can be read and written using +the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the +KVM_DEV_XICS_SOURCES attribute group, with the attribute number being +the interrupt source number. The 64 bit state word has the following +bitfields, starting from the least-significant end of the word: + +* Destination (server number), 32 bits + This specifies where the interrupt should be sent, and is the + interrupt server number specified for the destination vcpu. + +* Priority, 8 bits + This is the priority specified for this interrupt source, where 0 is + the highest priority and 255 is the lowest. An interrupt with a + priority of 255 will never be delivered. + +* Level sensitive flag, 1 bit + This bit is 1 for a level-sensitive interrupt source, or 0 for + edge-sensitive (or MSI). + +* Masked flag, 1 bit + This bit is set to 1 if the interrupt is masked (cannot be delivered + regardless of its priority), for example by the ibm,int-off RTAS + call, or 0 if it is not masked. + +* Pending flag, 1 bit + This bit is 1 if the source has a pending interrupt, otherwise 0. + +Only one XICS instance may be created per VM. diff --git a/Documentation/xtensa/mmu.txt b/Documentation/xtensa/mmu.txt new file mode 100644 index 000000000000..2b1af7606d57 --- /dev/null +++ b/Documentation/xtensa/mmu.txt @@ -0,0 +1,46 @@ +MMUv3 initialization sequence. + +The code in the initialize_mmu macro sets up MMUv3 memory mapping +identically to MMUv2 fixed memory mapping. Depending on +CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is +located in one of the following address ranges: + + 0xF0000000..0xFFFFFFFF (will keep same address in MMU v2 layout; + typically ROM) + 0x00000000..0x07FFFFFF (system RAM; this code is actually linked + at 0xD0000000..0xD7FFFFFF [cached] + or 0xD8000000..0xDFFFFFFF [uncached]; + in any case, initially runs elsewhere + than linked, so have to be careful) + +The code has the following assumptions: + This code fragment is run only on an MMU v3. + TLBs are in their reset state. + ITLBCFG and DTLBCFG are zero (reset state). + RASID is 0x04030201 (reset state). + PS.RING is zero (reset state). + LITBASE is zero (reset state, PC-relative literals); required to be PIC. + +TLB setup proceeds along the following steps. + + Legend: + VA = virtual address (two upper nibbles of it); + PA = physical address (two upper nibbles of it); + pc = physical range that contains this code; + +After step 2, we jump to virtual address in 0x40000000..0x5fffffff +that corresponds to next instruction to execute in this code. +After step 4, we jump to intended (linked) address of this code. + + Step 0 Step1 Step 2 Step3 Step 4 Step5 + ============ ===== ============ ===== ============ ===== + VA PA PA VA PA PA VA PA PA + ------ -- -- ------ -- -- ------ -- -- + E0..FF -> E0 -> E0 E0..FF -> E0 F0..FF -> F0 -> F0 + C0..DF -> C0 -> C0 C0..DF -> C0 E0..EF -> F0 -> F0 + A0..BF -> A0 -> A0 A0..BF -> A0 D8..DF -> 00 -> 00 + 80..9F -> 80 -> 80 80..9F -> 80 D0..D7 -> 00 -> 00 + 60..7F -> 60 -> 60 60..7F -> 60 + 40..5F -> 40 40..5F -> pc -> pc 40..5F -> pc + 20..3F -> 20 -> 20 20..3F -> 20 + 00..1F -> 00 -> 00 00..1F -> 00 diff --git a/Documentation/zh_CN/gpio.txt b/Documentation/zh_CN/gpio.txt index 4fa7b4e6f856..d5b8f01833f4 100644 --- a/Documentation/zh_CN/gpio.txt +++ b/Documentation/zh_CN/gpio.txt @@ -84,10 +84,10 @@ GPIO 公约 控制器的抽象函数来实现它。(有一些可选的代码能支持这种策略的实现,本文档 后面会介绍，但作为 GPIO 接口的客户端驱动程序必须与它的实现无关。) -也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。平台 -必须在 Kconfig 中声明对 GENERIC_GPIO的支持 (布尔型 true)，并提供 -一个 文件。那些调用标准 GPIO 函数的驱动应该在 Kconfig -入口中声明依赖GENERIC_GPIO。当驱动包含文件: +也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。同时，平台 +必须在 Kconfig 中选择 ARCH_REQUIRE_GPIOLIB 或者 ARCH_WANT_OPTIONAL_GPIOLIB +选项。那些调用标准 GPIO 函数的驱动应该在 Kconfig 入口中声明依赖GENERIC_GPIO。 +当驱动包含文件: #include diff --git a/MAINTAINERS b/MAINTAINERS index e1f5fac1838e..fd3a495a0005 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1620,6 +1620,13 @@ W: http://www.baycom.org/~tom/ham/ham.html S: Maintained F: drivers/net/hamradio/baycom* +BCACHE (BLOCK LAYER CACHE) +M: Kent Overstreet +L: linux-bcache@vger.kernel.org +W: http://bcache.evilpiepirate.org +S: Maintained: +F: drivers/md/bcache/ + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt @@ -3858,9 +3865,16 @@ M: K. Y. Srinivasan M: Haiyang Zhang L: devel@linuxdriverproject.org S: Maintained -F: drivers/hv/ +F: arch/x86/include/asm/mshyperv.h +F: arch/x86/include/uapi/asm/hyperv.h +F: arch/x86/kernel/cpu/mshyperv.c F: drivers/hid/hid-hyperv.c +F: drivers/hv/ F: drivers/net/hyperv/ +F: drivers/scsi/storvsc_drv.c +F: drivers/video/hyperv_fb.c +F: include/linux/hyperv.h +F: tools/hv/ I2C OVER PARALLEL PORT M: Jean Delvare @@ -4634,12 +4648,13 @@ F: include/linux/sunrpc/ F: include/uapi/linux/sunrpc/ KERNEL VIRTUAL MACHINE (KVM) -M: Marcelo Tosatti M: Gleb Natapov +M: Paolo Bonzini L: kvm@vger.kernel.org -W: http://kvm.qumranet.com +W: http://linux-kvm.org S: Supported -F: Documentation/*/kvm.txt +F: Documentation/*/kvm*.txt +F: Documentation/virtual/kvm/ F: arch/*/kvm/ F: arch/*/include/asm/kvm* F: include/linux/kvm* @@ -4969,6 +4984,13 @@ S: Maintained F: Documentation/hwmon/lm90 F: drivers/hwmon/lm90.c +LM95234 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/lm95234 +F: drivers/hwmon/lm95234.c + LME2510 MEDIA DRIVER M: Malcolm Priestley L: linux-media@vger.kernel.org @@ -5502,18 +5524,18 @@ F: Documentation/networking/s2io.txt F: Documentation/networking/vxge.txt F: drivers/net/ethernet/neterion/ -NETFILTER/IPTABLES/IPCHAINS -P: Harald Welte -P: Jozsef Kadlecsik +NETFILTER/IPTABLES M: Pablo Neira Ayuso M: Patrick McHardy +M: Jozsef Kadlecsik L: netfilter-devel@vger.kernel.org L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://1984.lsi.us.es/nf -T: git git://1984.lsi.us.es/nf-next +Q: http://patchwork.ozlabs.org/project/netfilter-devel/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -6062,6 +6084,7 @@ L: linux-parisc@vger.kernel.org W: http://www.parisc-linux.org/ Q: http://patchwork.kernel.org/project/linux-parisc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ F: drivers/parisc/ @@ -6716,6 +6739,14 @@ F: drivers/remoteproc/ F: Documentation/remoteproc.txt F: include/linux/remoteproc.h +REMOTE PROCESSOR MESSAGING (RPMSG) SUBSYSTEM +M: Ohad Ben-Cohen +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg.git +S: Maintained +F: drivers/rpmsg/ +F: Documentation/rpmsg.txt +F: include/linux/rpmsg.h + RFKILL M: Johannes Berg L: linux-wireless@vger.kernel.org @@ -7140,9 +7171,9 @@ F: drivers/misc/phantom.c F: include/uapi/linux/phantom.h SERIAL ATA (SATA) SUBSYSTEM -M: Jeff Garzik +M: Tejun Heo L: linux-ide@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git S: Supported F: drivers/ata/ F: include/linux/ata.h @@ -7839,7 +7870,7 @@ L: linux-scsi@vger.kernel.org L: target-devel@vger.kernel.org L: http://groups.google.com/group/linux-iscsi-target-dev W: http://www.linux-iscsi.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core.git master +T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master S: Supported F: drivers/target/ F: include/target/ @@ -8014,11 +8045,14 @@ F: arch/xtensa/ THERMAL M: Zhang Rui +M: Eduardo Valentin L: linux-pm@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git +Q: https://patchwork.kernel.org/project/linux-pm/list/ S: Supported F: drivers/thermal/ F: include/linux/thermal.h +F: include/linux/cpu_cooling.h THINGM BLINK(1) USB RGB LED DRIVER M: Vivien Didelot @@ -8164,6 +8198,13 @@ F: drivers/mmc/host/sh_mobile_sdhi.c F: include/linux/mmc/tmio.h F: include/linux/mmc/sh_mobile_sdhi.h +TMP401 HARDWARE MONITOR DRIVER +M: Guenter Roeck +L: lm-sensors@lm-sensors.org +S: Maintained +F: Documentation/hwmon/tmp401 +F: drivers/hwmon/tmp401.c + TMPFS (SHMEM FILESYSTEM) M: Hugh Dickins L: linux-mm@kvack.org diff --git a/Makefile b/Makefile index 878d7aa3d2dd..73e20dba55c1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 -PATCHLEVEL = 9 +PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc3 NAME = Unicycling Gorilla # *DOCUMENTATION* @@ -757,6 +757,8 @@ export KBUILD_VMLINUX_INIT := $(head-y) $(init-y) export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds export LDFLAGS_vmlinux +# used by scripts/pacmage/Makefile +export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools virt) vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN) diff --git a/arch/Kconfig b/arch/Kconfig index dd0e8eb8042f..a4429bcd609e 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -213,6 +213,9 @@ config USE_GENERIC_SMP_HELPERS config GENERIC_SMP_IDLE_THREAD bool +config GENERIC_IDLE_POLL_SETUP + bool + # Select if arch init_task initializer is different to init/init_task.c config ARCH_INIT_TASK bool diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 8629127640cf..837a1f2d8b96 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY bool default y -config GENERIC_GPIO - bool - config ZONE_DMA bool default y diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index e6f4eca09ee3..5917099470ea 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -16,8 +16,6 @@ config ARC select GENERIC_FIND_FIRST_BIT # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW - select GENERIC_KERNEL_EXECVE - select GENERIC_KERNEL_THREAD select GENERIC_PENDING_IRQ if SMP select GENERIC_SMP_IDLE_THREAD select HAVE_ARCH_KGDB @@ -61,9 +59,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_HWEIGHT def_bool y -config BINFMT_ELF - def_bool y - config STACKTRACE_SUPPORT def_bool y select STACKTRACE @@ -82,6 +77,7 @@ menu "ARC Architecture Configuration" menu "ARC Platform/SoC/Board" source "arch/arc/plat-arcfpga/Kconfig" +source "arch/arc/plat-tb10x/Kconfig" #New platform adds here endmenu @@ -134,9 +130,6 @@ if SMP config ARC_HAS_COH_CACHES def_bool n -config ARC_HAS_COH_LLSC - def_bool n - config ARC_HAS_COH_RTSC def_bool n @@ -189,6 +182,10 @@ config ARC_CACHE_PAGES Note that Global I/D ENABLE + Per Page DISABLE works but corollary Global DISABLE + Per Page ENABLE won't work +config ARC_CACHE_VIPT_ALIASING + bool "Support VIPT Aliasing D$" + default n + endif #ARC_CACHE config ARC_HAS_ICCM @@ -304,6 +301,9 @@ config ARC_FPU_SAVE_RESTORE based on actual usage of FPU by a task. Thus our implemn does this for all tasks in system. +config ARC_CANT_LLSC + def_bool n + menuconfig ARC_CPU_REL_4_10 bool "Enable support for Rel 4.10 features" default n @@ -314,9 +314,7 @@ menuconfig ARC_CPU_REL_4_10 config ARC_HAS_LLSC bool "Insn: LLOCK/SCOND (efficient atomic ops)" default y - depends on ARC_CPU_770 - # if SMP, enable LLSC ONLY if ARC implementation has coherent atomics - depends on !SMP || ARC_HAS_COH_LLSC + depends on ARC_CPU_770 && !ARC_CANT_LLSC config ARC_HAS_SWAPE bool "Insn: SWAPE (endian-swap)" @@ -415,13 +413,6 @@ config ARC_DBG_TLB_MISS_COUNT Counts number of I and D TLB Misses and exports them via Debugfs The counters can be cleared via Debugfs as well -config CMDLINE - string "Kernel command line to built-in" - default "print-fatal-signals=1" - help - The default command line which will be appended to the optional - u-boot provided command line (see below) - config CMDLINE_UBOOT bool "Support U-boot kernel command line passing" default n @@ -430,8 +421,8 @@ config CMDLINE_UBOOT command line from the U-boot environment to the Linux kernel then switch this option on. ARC U-boot will setup the cmdline in RAM/flash and set r2 to point - to it. kernel startup code will copy the string into cmdline buffer - and also append CONFIG_CMDLINE. + to it. kernel startup code will append this to DeviceTree + /bootargs provided cmdline args. config ARC_BUILTIN_DTB_NAME string "Built in DTB" @@ -441,6 +432,10 @@ config ARC_BUILTIN_DTB_NAME source "kernel/Kconfig.preempt" +menu "Executable file formats" +source "fs/Kconfig.binfmt" +endmenu + endmenu # "ARC Architecture Configuration" source "mm/Kconfig" diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 92379c7cbc1a..183397fd289e 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -8,6 +8,10 @@ UTS_MACHINE := arc +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := arc-elf32- +endif + KBUILD_DEFCONFIG := fpga_defconfig cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__ @@ -87,20 +91,23 @@ core-y += arch/arc/ core-y += arch/arc/boot/dts/ core-$(CONFIG_ARC_PLAT_FPGA_LEGACY) += arch/arc/plat-arcfpga/ +core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/ drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/ libs-y += arch/arc/lib/ $(LIBGCC) +boot := arch/arc/boot + #default target for make without any arguements. -KBUILD_IMAGE := bootpImage +KBUILD_IMAGE := bootpImage all: $(KBUILD_IMAGE) -boot := arch/arc/boot - bootpImage: vmlinux -uImage: vmlinux +boot_targets += uImage uImage.bin uImage.gz + +$(boot_targets): vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ %.dtb %.dtb.S %.dtb.o: scripts diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile index 7d514c24e095..e597cb34c16a 100644 --- a/arch/arc/boot/Makefile +++ b/arch/arc/boot/Makefile @@ -3,7 +3,6 @@ targets := vmlinux.bin vmlinux.bin.gz uImage # uImage build relies on mkimage being availble on your host for ARC target # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage # and make sure it's reacable from your PATH -MKIMAGE := $(srctree)/scripts/mkuboot.sh OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S @@ -12,7 +11,12 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \ UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE) UIMAGE_ENTRYADDR = $(LINUX_START_TEXT) -UIMAGE_COMPRESSION = gzip + +suffix-y := bin +suffix-$(CONFIG_KERNEL_GZIP) := gz + +targets += uImage uImage.bin uImage.gz +extra-y += vmlinux.bin vmlinux.bin.gz $(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) @@ -20,7 +24,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,uimage) +$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE + $(call if_changed,uimage,none) -PHONY += FORCE +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,uimage,gzip) + +$(obj)/uImage: $(obj)/uImage.$(suffix-y) + @ln -sf $(notdir $<) $@ + @echo ' Image $@ is ready' diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile index 5776835d583f..faf240e29ec2 100644 --- a/arch/arc/boot/dts/Makefile +++ b/arch/arc/boot/dts/Makefile @@ -8,6 +8,8 @@ endif obj-y += $(builtindtb-y).dtb.o targets += $(builtindtb-y).dtb +.SECONDARY: $(obj)/$(builtindtb-y).dtb.S + dtbs: $(addprefix $(obj)/, $(builtindtb-y).dtb) -clean-files := *.dtb +clean-files := *.dtb *.dtb.S diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi new file mode 100644 index 000000000000..941ad118a7e7 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -0,0 +1,340 @@ +/* + * Abilis Systems TB100 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/include/ "abilis_tb10x.dtsi" + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + clock-frequency = <500000000>; /* 500 MHZ */ + + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@FF10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + pingrp = "mis0_pins"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + pingrp = "mis1_pins"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + pingrp = "gpioa_pins"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + pingrp = "mip1_pins"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + pingrp = "mis2_pins"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + pingrp = "mis3_pins"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + pingrp = "gpioc_pins"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + pingrp = "mip3_pins"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + pingrp = "mis4_pins"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + pingrp = "mis5_pins"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + pingrp = "gpioe_pins"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + pingrp = "mip5_pins"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + pingrp = "mis6_pins"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + pingrp = "mis7_pins"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + pingrp = "gpiog_pins"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + pingrp = "mip7_pins"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + pingrp = "gpioj_pins"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + pingrp = "gpiok_pins"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + pingrp = "ciplus_pins"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + pingrp = "mcard_pins"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + pingrp = "mop_pins"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + pingrp = "mos0_pins"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + pingrp = "mos1_pins"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + pingrp = "mos2_pins"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + pingrp = "mos3_pins"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + pingrp = "uart0_pins"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + pingrp = "uart1_pins"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + pingrp = "gpiol_pins"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + pingrp = "gpiom_pins"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + pingrp = "spi3_pins"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + pingrp = "spi1_pins"; + }; + pctl_gpio_n: pctl-gpio-n { + pingrp = "gpion_pins"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + pingrp = "gpiob_pins"; + }; + pctl_gpio_d: pctl-gpio-d { + pingrp = "gpiod_pins"; + }; + pctl_gpio_f: pctl-gpio-f { + pingrp = "gpiof_pins"; + }; + pctl_gpio_h: pctl-gpio-h { + pingrp = "gpioh_pins"; + }; + pctl_gpio_i: pctl-gpio-i { + pingrp = "gpioi_pins"; + }; + }; + + gpioa: gpio@FF140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF140000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <0>; + gpio-pins = <&pctl_gpio_a>; + }; + gpiob: gpio@FF141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF141000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <3>; + gpio-pins = <&pctl_gpio_b>; + }; + gpioc: gpio@FF142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF142000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <5>; + gpio-pins = <&pctl_gpio_c>; + }; + gpiod: gpio@FF143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF143000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <8>; + gpio-pins = <&pctl_gpio_d>; + }; + gpioe: gpio@FF144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF144000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <10>; + gpio-pins = <&pctl_gpio_e>; + }; + gpiof: gpio@FF145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF145000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <13>; + gpio-pins = <&pctl_gpio_f>; + }; + gpiog: gpio@FF146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF146000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <15>; + gpio-pins = <&pctl_gpio_g>; + }; + gpioh: gpio@FF147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF147000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <18>; + gpio-pins = <&pctl_gpio_h>; + }; + gpioi: gpio@FF148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF148000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <20>; + gpio-pins = <&pctl_gpio_i>; + }; + gpioj: gpio@FF149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF149000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <32>; + gpio-pins = <&pctl_gpio_j>; + }; + gpiok: gpio@FF14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14A000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <64>; + gpio-pins = <&pctl_gpio_k>; + }; + gpiol: gpio@FF14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14B000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <86>; + gpio-pins = <&pctl_gpio_l>; + }; + gpiom: gpio@FF14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14C000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <90>; + gpio-pins = <&pctl_gpio_m>; + }; + gpion: gpio@FF14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14D000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <94>; + gpio-pins = <&pctl_gpio_n>; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts new file mode 100644 index 000000000000..0fa0d4abe795 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -0,0 +1,127 @@ +/* + * Abilis Systems TB100 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/include/ "abilis_tb100.dtsi" + +/ { + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@FF100000 { + pinctrl-names = "default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@FE100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@FF120000 { + sda-hold-time = <432>; + }; + i2c1: i2c@FF121000 { + sda-hold-time = <432>; + }; + i2c2: i2c@FF122000 { + sda-hold-time = <432>; + }; + i2c3: i2c@FF123000 { + sda-hold-time = <432>; + }; + i2c4: i2c@FF124000 { + sda-hold-time = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi new file mode 100644 index 000000000000..fd25c212049f --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -0,0 +1,349 @@ +/* + * Abilis Systems TB101 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/include/ "abilis_tb10x.dtsi" + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + clock-frequency = <500000000>; /* 500 MHZ */ + + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@FF10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + pingrp = "mis0_pins"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + pingrp = "mis1_pins"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + pingrp = "gpioa_pins"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + pingrp = "mip1_pins"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + pingrp = "mis2_pins"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + pingrp = "mis3_pins"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + pingrp = "gpioc_pins"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + pingrp = "mip3_pins"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + pingrp = "mis4_pins"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + pingrp = "mis5_pins"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + pingrp = "gpioe_pins"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + pingrp = "mip5_pins"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + pingrp = "mis6_pins"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + pingrp = "mis7_pins"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + pingrp = "gpiog_pins"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + pingrp = "mip7_pins"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + pingrp = "gpioj_pins"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + pingrp = "gpiok_pins"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + pingrp = "ciplus_pins"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + pingrp = "mcard_pins"; + }; + pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ + pingrp = "stc0_pins"; + }; + pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ + pingrp = "stc1_pins"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + pingrp = "mop_pins"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + pingrp = "mos0_pins"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + pingrp = "mos1_pins"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + pingrp = "mos2_pins"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + pingrp = "mos3_pins"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + pingrp = "uart0_pins"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + pingrp = "uart1_pins"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + pingrp = "gpiol_pins"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + pingrp = "gpiom_pins"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + pingrp = "spi3_pins"; + }; + pctl_jtag: pctl-jtag { + pingrp = "jtag_pins"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + pingrp = "spi1_pins"; + }; + pctl_gpio_n: pctl-gpio-n { + pingrp = "gpion_pins"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + pingrp = "gpiob_pins"; + }; + pctl_gpio_d: pctl-gpio-d { + pingrp = "gpiod_pins"; + }; + pctl_gpio_f: pctl-gpio-f { + pingrp = "gpiof_pins"; + }; + pctl_gpio_h: pctl-gpio-h { + pingrp = "gpioh_pins"; + }; + pctl_gpio_i: pctl-gpio-i { + pingrp = "gpioi_pins"; + }; + }; + + gpioa: gpio@FF140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF140000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <0>; + gpio-pins = <&pctl_gpio_a>; + }; + gpiob: gpio@FF141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF141000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <3>; + gpio-pins = <&pctl_gpio_b>; + }; + gpioc: gpio@FF142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF142000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <5>; + gpio-pins = <&pctl_gpio_c>; + }; + gpiod: gpio@FF143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF143000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <8>; + gpio-pins = <&pctl_gpio_d>; + }; + gpioe: gpio@FF144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF144000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <10>; + gpio-pins = <&pctl_gpio_e>; + }; + gpiof: gpio@FF145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF145000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <13>; + gpio-pins = <&pctl_gpio_f>; + }; + gpiog: gpio@FF146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF146000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <15>; + gpio-pins = <&pctl_gpio_g>; + }; + gpioh: gpio@FF147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF147000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <18>; + gpio-pins = <&pctl_gpio_h>; + }; + gpioi: gpio@FF148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF148000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <20>; + gpio-pins = <&pctl_gpio_i>; + }; + gpioj: gpio@FF149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF149000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <32>; + gpio-pins = <&pctl_gpio_j>; + }; + gpiok: gpio@FF14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14A000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <64>; + gpio-pins = <&pctl_gpio_k>; + }; + gpiol: gpio@FF14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14B000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <86>; + gpio-pins = <&pctl_gpio_l>; + }; + gpiom: gpio@FF14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14C000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <90>; + gpio-pins = <&pctl_gpio_m>; + }; + gpion: gpio@FF14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 1>; + reg = <0xFF14D000 0x1000>; + gpio-controller; + #gpio-cells = <1>; + gpio-base = <94>; + gpio-pins = <&pctl_gpio_n>; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts new file mode 100644 index 000000000000..a4d80ce283ae --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -0,0 +1,127 @@ +/* + * Abilis Systems TB101 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/include/ "abilis_tb101.dtsi" + +/ { + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@FF100000 { + pinctrl-names = "default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@FE100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@FF120000 { + sda-hold-time = <432>; + }; + i2c1: i2c@FF121000 { + sda-hold-time = <432>; + }; + i2c2: i2c@FF122000 { + sda-hold-time = <432>; + }; + i2c3: i2c@FF123000 { + sda-hold-time = <432>; + }; + i2c4: i2c@FF124000 { + sda-hold-time = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi new file mode 100644 index 000000000000..b97e3051ba4b --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -0,0 +1,245 @@ +/* + * Abilis Systems TB10X SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* interrupt specifiers + * -------------------- + * 0: rising, 1: low, 2: high, 3: falling, + */ + +/ { + compatible = "abilis,arc-tb10x"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + }; + }; + + soc100 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0xfe000000 0xfe000000 0x02000000 + 0x000F0000 0x000F0000 0x00010000>; + compatible = "abilis,tb10x", "simple-bus"; + + pll0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "pll0"; + }; + cpu_clk: clkdiv_cpu { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "cpu_clk"; + }; + ahb_clk: clkdiv_ahb { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "ahb_clk"; + }; + + iomux: iomux@FF10601c { + #address-cells = <1>; + #size-cells = <1>; + compatible = "abilis,tb10x-iomux"; + reg = <0xFF10601c 0x4>; + }; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + tb10x_ictl: pic@fe002000 { + compatible = "abilis,tb10x_ictl"; + reg = <0xFE002000 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 30 31>; + }; + + uart@FF100000 { + compatible = "snps,dw-apb-uart"; + reg = <0xFF100000 0x100>; + clock-frequency = <166666666>; + interrupts = <25 1>; + reg-shift = <2>; + reg-io-width = <4>; + interrupt-parent = <&tb10x_ictl>; + }; + ethernet@FE100000 { + compatible = "snps,dwmac-3.70a","snps,dwmac"; + reg = <0xFE100000 0x1058>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <6 1>; + interrupt-names = "macirq"; + clocks = <&ahb_clk>; + clock-names = "stmmaceth"; + }; + dma@FE000000 { + compatible = "snps,dma-spear1340"; + reg = <0xFE000000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <14 1>; + dma-channels = <6>; + dma-requests = <0>; + dma-masters = <1>; + #dma-cells = <3>; + chan_allocation_order = <0>; + chan_priority = <1>; + block_size = <0x7ff>; + data_width = <2 0 0 0>; + clocks = <&ahb_clk>; + clock-names = "hclk"; + }; + + i2c0: i2c@FF120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF120000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c1: i2c@FF121000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF121000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c2: i2c@FF122000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF122000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c3: i2c@FF123000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF123000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + i2c4: i2c@FF124000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xFF124000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 1>; + clocks = <&ahb_clk>; + }; + + spi0: spi@0xFE010000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "abilis,tb100-spi"; + num-cs = <1>; + reg = <0xFE010000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <26 1>; + clocks = <&ahb_clk>; + }; + spi1: spi@0xFE011000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "abilis,tb100-spi"; + num-cs = <2>; + reg = <0xFE011000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <10 1>; + clocks = <&ahb_clk>; + }; + + tb10x_tsm: tb10x-tsm@ff316000 { + compatible = "abilis,tb100-tsm"; + reg = <0xff316000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <17 1>; + output-clkdiv = <4>; + global-packet-delay = <0x21>; + port-packet-delay = <0>; + }; + tb10x_stream_proc: tb10x-stream-proc { + compatible = "abilis,tb100-streamproc"; + reg = <0xfff00000 0x200>, + <0x000f0000 0x10000>, + <0xfff00200 0x105>, + <0xff10600c 0x1>, + <0xfe001018 0x1>; + reg-names = "mbox", + "sp_iccm", + "mbox_irq", + "cpuctrl", + "a6it_int_force"; + interrupt-parent = <&tb10x_ictl>; + interrupts = <20 1>, <19 1>; + interrupt-names = "cmd_irq", "event_irq"; + }; + tb10x_mdsc0: tb10x-mdscr@FF300000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF300000 0x7000>; + tb100-mdscr-manage-tsin; + }; + tb10x_mscr0: tb10x-mdscr@FF307000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF307000 0x7000>; + }; + tb10x_scr0: tb10x-mdscr@ff30e000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF30e000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_scr1: tb10x-mdscr@ff312000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xFF312000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_wfb: tb10x-wfb@ff319000 { + compatible = "abilis,tb100-wfb"; + reg = <0xff319000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <16 1>; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts new file mode 100644 index 000000000000..ea16d782af58 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci.dts @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + compatible = "snps,nsimosci"; + clock-frequency = <80000000>; /* 80 MHZ */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + chosen { + bootargs = "console=tty0 consoleblank=0"; + }; + + aliases { + serial0 = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@c0000000 { + compatible = "snps,dw-apb-uart"; + reg = <0xc0000000 0x2000>; + interrupts = <11>; + #clock-frequency = <80000000>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + status = "okay"; + }; + + pgu0: pgu@c9000000 { + compatible = "snps,arcpgufb"; + reg = <0xc9000000 0x400>; + }; + + ps2: ps2@c9001000 { + compatible = "snps,arc_ps2"; + reg = <0xc9000400 0x14>; + interrupts = <13>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@c0003000 { + compatible = "snps,oscilan"; + reg = <0xc0003000 0x44>; + interrupts = <7>, <8>; + interrupt-names = "rx", "tx"; + }; + }; +}; diff --git a/arch/arc/configs/fpga_defconfig b/arch/arc/configs/fpga_defconfig index b8698067ebbe..95350be6ef6f 100644 --- a/arch/arc/configs/fpga_defconfig +++ b/arch/arc/configs/fpga_defconfig @@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set @@ -24,6 +24,7 @@ CONFIG_ARC_PLAT_FPGA_LEGACY=y CONFIG_ARC_BOARD_ML509=y # CONFIG_ARC_HAS_RTSC is not set CONFIG_ARC_BUILTIN_DTB_NAME="angel4" +CONFIG_PREEMPT=y # CONFIG_COMPACTION is not set # CONFIG_CROSS_MEMORY_ATTACH is not set CONFIG_NET=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig new file mode 100644 index 000000000000..446c96c24eff --- /dev/null +++ b/arch/arc/configs/nsimosci_defconfig @@ -0,0 +1,75 @@ +CONFIG_CROSS_COMPILE="arc-elf32-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="ARCLinux" +# CONFIG_SWAP is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../arc_initramfs" +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARC_PLAT_FPGA_LEGACY=y +CONFIG_ARC_BOARD_ML509=y +# CONFIG_ARC_IDE is not set +# CONFIG_ARCTANGENT_EMAC is not set +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci" +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +CONFIG_MOUSE_PS2_TOUCHKIT=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_ARC=y +CONFIG_SERIAL_ARC_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_XZ_DEC=y diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig new file mode 100644 index 000000000000..4fa5cd9f2202 --- /dev/null +++ b/arch/arc/configs/tb10x_defconfig @@ -0,0 +1,117 @@ +CONFIG_CROSS_COMPILE="arc-elf32-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="tb10x" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio" +CONFIG_INITRAMFS_ROOT_UID=2100 +CONFIG_INITRAMFS_ROOT_GID=501 +# CONFIG_RD_GZIP is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_AIO is not set +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLOCK is not set +CONFIG_ARC_PLAT_TB10X=y +CONFIG_ARC_CACHE_LINE_SHIFT=5 +# CONFIG_ARC_HAS_RTSC is not set +CONFIG_ARC_STACK_NONEXEC=y +CONFIG_HZ=250 +CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk" +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_COMPACTION is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_DEBUG_FS=y +CONFIG_STMMAC_DA=y +CONFIG_STMMAC_CHAINED=y +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_NET_DMA=y +CONFIG_ASYNC_TX_DMA=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index 48af742f8b5a..d8dd660898b9 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -32,7 +32,6 @@ generic-y += resource.h generic-y += scatterlist.h generic-y += sembuf.h generic-y += shmbuf.h -generic-y += shmparam.h generic-y += siginfo.h generic-y += socket.h generic-y += sockios.h diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 6632273861fd..d5555fe4742a 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -55,9 +55,6 @@ : "r"(data), "r"(ptr)); \ }) -/* used to give SHMLBA a value to avoid Cache Aliasing */ -extern unsigned int ARC_shmlba; - #define ARCH_DMA_MINALIGN L1_CACHE_BYTES /* diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 97ee96f26505..ef62682e8d95 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -19,13 +19,24 @@ #define _ASM_CACHEFLUSH_H #include +#include + +/* + * Semantically we need this because icache doesn't snoop dcache/dma. + * However ARC Cache flush requires paddr as well as vaddr, latter not available + * in the flush_icache_page() API. So we no-op it but do the equivalent work + * in update_mmu_cache() + */ +#define flush_icache_page(vma, page) void flush_cache_all(void); void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); -void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr, - int len); +void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len); +void __inv_icache_page(unsigned long paddr, unsigned long vaddr); +void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr); +#define __flush_dcache_page(p, v) \ + ___flush_dcache_page((unsigned long)p, (unsigned long)v) #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 @@ -42,23 +53,62 @@ void dma_cache_wback(unsigned long start, unsigned long sz); #define flush_cache_vmap(start, end) flush_cache_all() #define flush_cache_vunmap(start, end) flush_cache_all() -/* - * VM callbacks when entire/range of user-space V-P mappings are - * torn-down/get-invalidated - * - * Currently we don't support D$ aliasing configs for our VIPT caches - * NOPS for VIPT Cache with non-aliasing D$ configurations only - */ -#define flush_cache_dup_mm(mm) /* called on fork */ +#define flush_cache_dup_mm(mm) /* called on fork (VIVT only) */ + +#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING + #define flush_cache_mm(mm) /* called on munmap/exit */ #define flush_cache_range(mm, u_vstart, u_vend) #define flush_cache_page(vma, u_vaddr, pfn) /* PF handling/COW-break */ +#else /* VIPT aliasing dcache */ + +/* To clear out stale userspace mappings */ +void flush_cache_mm(struct mm_struct *mm); +void flush_cache_range(struct vm_area_struct *vma, + unsigned long start,unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, + unsigned long user_addr, unsigned long page); + +/* + * To make sure that userspace mapping is flushed to memory before + * get_user_pages() uses a kernel mapping to access the page + */ +#define ARCH_HAS_FLUSH_ANON_PAGE +void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long u_vaddr); + +#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ + +/* + * Simple wrapper over config option + * Bootup code ensures that hardware matches kernel configuration + */ +static inline int cache_is_vipt_aliasing(void) +{ +#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING + return 1; +#else + return 0; +#endif +} + +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1) + +/* + * checks if two addresses (after page aligning) index into same cache set + */ +#define addr_not_cache_congruent(addr1, addr2) \ +({ \ + cache_is_vipt_aliasing() ? \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \ +}) + #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ do { \ memcpy(dst, src, len); \ if (vma->vm_flags & VM_EXEC) \ - flush_icache_range_vaddr((unsigned long)(dst), vaddr, len);\ + __sync_icache_dcache((unsigned long)(dst), vaddr, len); \ } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index 4c588f9820cf..57898a17eb82 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -9,7 +9,8 @@ #ifndef __ASM_ARC_IRQ_H #define __ASM_ARC_IRQ_H -#define NR_IRQS 32 +#define NR_CPU_IRQS 32 /* number of interrupt lines of ARC770 CPU */ +#define NR_IRQS 128 /* allow some CPU external IRQ handling */ /* Platform Independent IRQs */ #define TIMER0_IRQ 3 diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index bdf546104551..ab84bf131fe1 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -16,12 +16,17 @@ #define get_user_page(vaddr) __get_free_page(GFP_KERNEL) #define free_user_page(page, addr) free_page(addr) -/* TBD: for now don't worry about VIPT D$ aliasing */ #define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) #define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) -#define clear_user_page(addr, vaddr, pg) clear_page(addr) -#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom) +struct vm_area_struct; +struct page; + +#define __HAVE_ARCH_COPY_USER_HIGHPAGE + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long u_vaddr, struct vm_area_struct *vma); +void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); #undef STRICT_MM_TYPECHECKS diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index b7e36684c091..95b1522212a7 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -57,9 +57,9 @@ #define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */ #define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<5) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */ @@ -72,9 +72,9 @@ /* PD1 */ #define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */ -#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */ -#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ -#define _PAGE_READ (1<<3) /* Page has user read perm (H) */ +#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */ +#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */ +#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */ #define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */ #define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */ @@ -93,7 +93,8 @@ #endif /* Kernel allowed all permissions for all pages */ -#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) +#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \ + _PAGE_GLOBAL | _PAGE_PRESENT) #ifdef CONFIG_ARC_CACHE_PAGES #define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE @@ -106,7 +107,11 @@ * -by default cached, unless config otherwise * -present in memory */ -#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) +#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE) + +#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ) +#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE) +#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE) /* Set of bits not changed in pte_modify */ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) @@ -125,11 +130,10 @@ * kernel vaddr space - visible in all addr spaces, but kernel mode only * Thus Global, all-kernel-access, no-user-access, cached */ -#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL) +#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) /* ioremap */ -#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \ - _PAGE_GLOBAL) +#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS) /************************************************************************** * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) @@ -395,6 +399,9 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, #include +/* to cope with aliasing VIPT cache */ +#define HAVE_ARCH_UNMAPPED_AREA + /* * No page table caches to initialise */ diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h index 4dff5a1e4128..602b0970a764 100644 --- a/arch/arc/include/asm/serial.h +++ b/arch/arc/include/asm/serial.h @@ -22,4 +22,14 @@ #define BASE_BAUD (arc_get_core_freq() / 16) +/* + * This is definitely going to break early 8250 consoles on multi-platform + * images but hey, it won't add any code complexity for a debug feature of + * one broken driver. + */ +#ifdef CONFIG_ARC_PLAT_TB10X +#undef BASE_BAUD +#define BASE_BAUD (arc_get_core_freq() / 16 / 3) +#endif + #endif /* _ASM_ARC_SERIAL_H */ diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h new file mode 100644 index 000000000000..fffeecc04270 --- /dev/null +++ b/arch/arc/include/asm/shmparam.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARC_ASM_SHMPARAM_H +#define __ARC_ASM_SHMPARAM_H + +/* Handle upto 2 cache bins */ +#define SHMLBA (2 * PAGE_SIZE) + +/* Enforce SHMLBA in shmat */ +#define __ARCH_FORCE_SHMLBA + +#endif diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h index 3eb2ce0bdfa3..cb0c708ca665 100644 --- a/arch/arc/include/asm/tlb.h +++ b/arch/arc/include/asm/tlb.h @@ -16,25 +16,40 @@ /* Masks for actual TLB "PD"s */ #define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) #define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \ - _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ + _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \ _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) #ifndef __ASSEMBLY__ -#define tlb_flush(tlb) local_flush_tlb_mm((tlb)->mm) +#define tlb_flush(tlb) \ +do { \ + if (tlb->fullmm) \ + flush_tlb_mm((tlb)->mm); \ +} while (0) /* * This pair is called at time of munmap/exit to flush cache and TLB entries * for mappings being torn down. - * 1) cache-flush part -implemented via tlb_start_vma( ) can be NOP (for now) - * as we don't support aliasing configs in our VIPT D$. - * 2) tlb-flush part - implemted via tlb_end_vma( ) can be NOP as well- - * albiet for difft reasons - its better handled by moving to new ASID + * 1) cache-flush part -implemented via tlb_start_vma( ) for VIPT aliasing D$ + * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range * * Note, read http://lkml.org/lkml/2004/1/15/6 */ +#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING #define tlb_start_vma(tlb, vma) -#define tlb_end_vma(tlb, vma) +#else +#define tlb_start_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ +} while(0) +#endif + +#define tlb_end_vma(tlb, vma) \ +do { \ + if (!tlb->fullmm) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ +} while (0) #define __tlb_remove_tlb_entry(tlb, ptep, address) diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c index 0dc148ebce74..7dcda7025241 100644 --- a/arch/arc/kernel/asm-offsets.c +++ b/arch/arc/kernel/asm-offsets.c @@ -11,9 +11,9 @@ #include #include #include +#include #include #include -#include int main(void) { diff --git a/arch/arc/kernel/clk.c b/arch/arc/kernel/clk.c index 66ce0dc917fb..10c7b0b5a079 100644 --- a/arch/arc/kernel/clk.c +++ b/arch/arc/kernel/clk.c @@ -8,7 +8,7 @@ #include -unsigned long core_freq = 800000000; +unsigned long core_freq = 80000000; /* * As of now we default to device-tree provided clock diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c index d14764ae2c60..b8a549c4f540 100644 --- a/arch/arc/kernel/disasm.c +++ b/arch/arc/kernel/disasm.c @@ -12,8 +12,8 @@ #include #include #include +#include #include -#include #if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \ defined(CONFIG_KPROBES) diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S index 91eeab81f52d..0c6d664d4a83 100644 --- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -393,12 +393,14 @@ ARC_ENTRY EV_TLBProtV #ifdef CONFIG_ARC_MISALIGN_ACCESS SAVE_CALLEE_SAVED_USER mov r3, sp ; callee_regs -#endif bl do_misaligned_access -#ifdef CONFIG_ARC_MISALIGN_ACCESS - DISCARD_CALLEE_SAVED_USER + ; TBD: optimize - do this only if a callee reg was involved + ; either a dst of emulated LD/ST or src with address-writeback + RESTORE_CALLEE_SAVED_USER +#else + bl do_misaligned_error #endif b ret_from_exception diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 551c10dff481..8115fa531575 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -11,6 +11,8 @@ #include #include #include +#include +#include "../../drivers/irqchip/irqchip.h" #include #include #include @@ -26,7 +28,7 @@ * -Disable all IRQs (on CPU side) * -Optionally, setup the High priority Interrupts as Level 2 IRQs */ -void __init arc_init_IRQ(void) +void __cpuinit arc_init_IRQ(void) { int level_mask = 0; @@ -97,15 +99,13 @@ static const struct irq_domain_ops arc_intc_domain_ops = { static struct irq_domain *root_domain; -void __init init_onchip_IRQ(void) +static int __init +init_onchip_IRQ(struct device_node *intc, struct device_node *parent) { - struct device_node *intc = NULL; + if (parent) + panic("DeviceTree incore intc not a root irq controller\n"); - intc = of_find_compatible_node(NULL, NULL, "snps,arc700-intc"); - if(!intc) - panic("DeviceTree Missing incore intc\n"); - - root_domain = irq_domain_add_legacy(intc, NR_IRQS, 0, 0, + root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0, &arc_intc_domain_ops, NULL); if (!root_domain) @@ -113,8 +113,12 @@ void __init init_onchip_IRQ(void) /* with this we don't need to export root_domain */ irq_set_default_host(root_domain); + + return 0; } +IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); + /* * Late Interrupt system init called from start_kernel for Boot CPU only * @@ -123,12 +127,13 @@ void __init init_onchip_IRQ(void) */ void __init init_IRQ(void) { - init_onchip_IRQ(); - /* Any external intc can be setup here */ if (machine_desc->init_irq) machine_desc->init_irq(); + /* process the entire interrupt tree in one go */ + irqchip_init(); + #ifdef CONFIG_SMP /* Master CPU can initialize it's side of IPI */ if (machine_desc->init_smp) diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c index 3bfeacb674de..5a7b80e2d883 100644 --- a/arch/arc/kernel/kprobes.c +++ b/arch/arc/kernel/kprobes.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c index cdd359352c0a..376e04622962 100644 --- a/arch/arc/kernel/module.c +++ b/arch/arc/kernel/module.c @@ -47,7 +47,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, } } #endif - return 0; + return 0; } void module_arch_cleanup(struct module *mod) @@ -141,5 +141,5 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, mod->arch.unw_info = unw; } #endif - return 0; + return 0; } diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index 2d95ac07df7b..b2b3731dd1e9 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -14,14 +14,13 @@ #include #include #include +#include #include #include #include -#include #include #include #include -#include #include #include #include @@ -32,14 +31,14 @@ int running_on_hw = 1; /* vs. on ISS */ char __initdata command_line[COMMAND_LINE_SIZE]; -struct machine_desc *machine_desc __initdata; +struct machine_desc *machine_desc __cpuinitdata; struct task_struct *_current_task[NR_CPUS]; /* For stack switching */ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; -void __init read_arc_build_cfg_regs(void) +void __cpuinit read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -238,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void __init arc_chk_ccms(void) +void __cpuinit arc_chk_ccms(void) { #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -273,7 +272,7 @@ void __init arc_chk_ccms(void) * hardware has dedicated regs which need to be saved/restored on ctx-sw * (Single Precision uses core regs), thus kernel is kind of oblivious to it */ -void __init arc_chk_fpu(void) +void __cpuinit arc_chk_fpu(void) { struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; @@ -294,7 +293,7 @@ void __init arc_chk_fpu(void) * such as only for boot CPU etc */ -void __init setup_processor(void) +void __cpuinit setup_processor(void) { char str[512]; int cpu_id = smp_processor_id(); @@ -319,24 +318,21 @@ void __init setup_processor(void) void __init setup_arch(char **cmdline_p) { -#ifdef CONFIG_CMDLINE_UBOOT - /* Make sure that a whitespace is inserted before */ - strlcat(command_line, " ", sizeof(command_line)); -#endif - /* - * Append .config cmdline to base command line, which might already - * contain u-boot "bootargs" (handled by head.S, if so configured) - */ - strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line)); - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; - + /* This also populates @boot_command_line from /bootargs */ machine_desc = setup_machine_fdt(__dtb_start); if (!machine_desc) panic("Embedded DT invalid\n"); + /* Append any u-boot provided cmdline */ +#ifdef CONFIG_CMDLINE_UBOOT + /* Add a whitespace seperator between the 2 cmdlines */ + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + strlcat(boot_command_line, command_line, COMMAND_LINE_SIZE); +#endif + + /* Save unparsed command line copy for /proc/cmdline */ + *cmdline_p = boot_command_line; + /* To force early parsing of things like mem=xxx */ parse_early_param(); diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index f13f72807aa5..09f4309aa2c0 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c index 7496995371e8..0471d9c9dd54 100644 --- a/arch/arc/kernel/traps.c +++ b/arch/arc/kernel/traps.c @@ -16,11 +16,12 @@ #include #include #include -#include +#include +#include +#include #include -#include #include -#include +#include void __init trap_init(void) { @@ -83,6 +84,7 @@ DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC) DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC) DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", do_memory_error, BUS_ADRERR) DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) +DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN) #ifdef CONFIG_ARC_MISALIGN_ACCESS /* @@ -91,21 +93,11 @@ DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) int do_misaligned_access(unsigned long cause, unsigned long address, struct pt_regs *regs, struct callee_regs *cregs) { - if (misaligned_fixup(address, regs, cause, cregs) != 0) { - siginfo_t info; + if (misaligned_fixup(address, regs, cause, cregs) != 0) + return do_misaligned_error(cause, address, regs); - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRALN; - info.si_addr = (void __user *)address; - return handle_exception(cause, "Misaligned Access", regs, - &info); - } return 0; } - -#else -DO_ERROR_INFO(SIGSEGV, "Misaligned Access", do_misaligned_access, SEGV_ACCERR) #endif /* diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index 0aec01985bf9..11c301b81c92 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num) char buf[512]; int n = 0, len = sizeof(buf); - /* weird loop because pt_regs regs rev r12..r0, r25..r13 */ for (i = start_num; i < start_num + 13; i++) { n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t", i, (unsigned long)*reg_rev); @@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num) if (((i + 1) % 3) == 0) n += scnprintf(buf + n, len - n, "\n"); + /* because pt_regs has regs reversed: r12..r0, r25..r13 */ reg_rev--; } if (start_num != 0) n += scnprintf(buf + n, len - n, "\n\n"); - pr_info("%s", buf); + /* To continue printing callee regs on same line as scratch regs */ + if (start_num == 0) + pr_info("%s", buf); + else + pr_cont("%s\n", buf); } static void show_callee_regs(struct callee_regs *cregs) @@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf) dev_t dev = 0; char *nm = buf; + /* can't use print_vma_addr() yet as it doesn't check for + * non-inclusive vma + */ + vma = find_vma(current->active_mm, address); /* check against the find_vma( ) behaviour which returns the next VMA @@ -98,10 +106,13 @@ static void show_faulting_vma(unsigned long address, char *buf) ino = inode->i_ino; } pr_info(" @off 0x%lx in [%s]\n" - " VMA: 0x%08lx to 0x%08lx\n\n", - address - vma->vm_start, nm, vma->vm_start, vma->vm_end); - } else + " VMA: 0x%08lx to 0x%08lx\n", + vma->vm_start < TASK_UNMAPPED_BASE ? + address : address - vma->vm_start, + nm, vma->vm_start, vma->vm_end); + } else { pr_info(" @No matching VMA found\n"); + } } static void show_ecr_verbose(struct pt_regs *regs) @@ -110,7 +121,7 @@ static void show_ecr_verbose(struct pt_regs *regs) unsigned long address; cause_reg = current->thread.cause_code; - pr_info("\n[ECR]: 0x%08x => ", cause_reg); + pr_info("\n[ECR ]: 0x%08x => ", cause_reg); /* For Data fault, this is data address not instruction addr */ address = current->thread.fault_address; @@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs) /* For DTLB Miss or ProtV, display the memory involved too */ if (vec == ECR_V_DTLB_MISS) { - pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n", + pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n", (cause_code == 0x01) ? "Read From" : ((cause_code == 0x02) ? "Write to" : "EX"), address, regs->ret); @@ -168,20 +179,23 @@ void show_regs(struct pt_regs *regs) if (current->thread.cause_code) show_ecr_verbose(regs); - pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address); - pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret); + pr_info("[EFA ]: 0x%08lx\n[BLINK ]: %pS\n[ERET ]: %pS\n", + current->thread.fault_address, + (void *)regs->blink, (void *)regs->ret); - show_faulting_vma(regs->ret, buf); /* faulting code, not data */ + if (user_mode(regs)) + show_faulting_vma(regs->ret, buf); /* faulting code, not data */ - /* can't use print_vma_addr() yet as it doesn't check for - * non-inclusive vma - */ + pr_info("[STAT32]: 0x%08lx", regs->status32); - /* print special regs */ - pr_info("status32: 0x%08lx\n", regs->status32); - pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp); - pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n", - regs->bta, regs->blink); +#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit : "" + if (!user_mode(regs)) + pr_cont(" : %2s %2s %2s %2s %2s\n", + STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1), + STS_BIT(regs, E2), STS_BIT(regs, E1)); + + pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n", + regs->bta, regs->sp, regs->fp); pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n", regs->lp_start, regs->lp_end, regs->lp_count); diff --git a/arch/arc/mm/Makefile b/arch/arc/mm/Makefile index 168dc146a8f6..ac95cc239c1e 100644 --- a/arch/arc/mm/Makefile +++ b/arch/arc/mm/Makefile @@ -7,4 +7,4 @@ # obj-y := extable.o ioremap.o dma.o fault.o init.o -obj-y += tlb.o tlbex.o cache_arc700.o +obj-y += tlb.o tlbex.o cache_arc700.o mmap.o diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 88d617d84234..aedce1905441 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -68,20 +68,11 @@ #include #include #include +#include #include #include #include - -#ifdef CONFIG_ARC_HAS_ICACHE -static void __ic_line_inv_no_alias(unsigned long, int); -static void __ic_line_inv_2_alias(unsigned long, int); -static void __ic_line_inv_4_alias(unsigned long, int); - -/* Holds the ptr to flush routine, dependign on size due to aliasing issues */ -static void (*___flush_icache_rtn) (unsigned long, int); -#endif - char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; @@ -109,7 +100,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len) * the cpuinfo structure for later use. * No Validation done here, simply read/convert the BCRs */ -void __init read_decode_cache_bcr(void) +void __cpuinit read_decode_cache_bcr(void) { struct bcr_cache ibcr, dbcr; struct cpuinfo_arc_cache *p_ic, *p_dc; @@ -141,13 +132,14 @@ void __init read_decode_cache_bcr(void) * 3. Enable the Caches, setup default flush mode for D-Cache * 3. Calculate the SHMLBA used by user space */ -void __init arc_cache_init(void) +void __cpuinit arc_cache_init(void) { unsigned int temp; unsigned int cpu = smp_processor_id(); struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; int way_pg_ratio = way_pg_ratio; + int dcache_does_alias; char str[256]; printk(arc_cache_mumbojumbo(0, str, sizeof(str))); @@ -171,30 +163,6 @@ void __init arc_cache_init(void) } #endif - - /* - * if Cache way size is <= page size then no aliasing exhibited - * otherwise ratio determines num of aliases. - * e.g. 32K I$, 2 way set assoc, 8k pg size - * way-sz = 32k/2 = 16k - * way-pg-ratio = 16k/8k = 2, so 2 aliases possible - * (meaning 1 line could be in 2 possible locations). - */ - way_pg_ratio = ic->sz / ARC_ICACHE_WAYS / PAGE_SIZE; - switch (way_pg_ratio) { - case 0: - case 1: - ___flush_icache_rtn = __ic_line_inv_no_alias; - break; - case 2: - ___flush_icache_rtn = __ic_line_inv_2_alias; - break; - case 4: - ___flush_icache_rtn = __ic_line_inv_4_alias; - break; - default: - panic("Unsupported I-Cache Sz\n"); - } #endif /* Enable/disable I-Cache */ @@ -218,9 +186,13 @@ chk_dc: panic("Cache H/W doesn't match kernel Config"); } + dcache_does_alias = (dc->sz / ARC_DCACHE_WAYS) > PAGE_SIZE; + /* check for D-Cache aliasing */ - if ((dc->sz / ARC_DCACHE_WAYS) > PAGE_SIZE) - panic("D$ aliasing not handled right now\n"); + if (dcache_does_alias && !cache_is_vipt_aliasing()) + panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + else if (!dcache_does_alias && cache_is_vipt_aliasing()) + panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); #endif /* Set the default Invalidate Mode to "simpy discard dirty lines" @@ -303,47 +275,57 @@ static inline void __dc_entire_op(const int cacheop) * Per Line Operation on D-Cache * Doesn't deal with type-of-op/IRQ-disabling/waiting-for-flush-to-complete * It's sole purpose is to help gcc generate ZOL + * (aliasing VIPT dcache flushing needs both vaddr and paddr) */ -static inline void __dc_line_loop(unsigned long start, unsigned long sz, - int aux_reg) +static inline void __dc_line_loop(unsigned long paddr, unsigned long vaddr, + unsigned long sz, const int aux_reg) { - int num_lines, slack; + int num_lines; /* Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @start - aligned to cache line and integral @num_lines. + * and have @paddr - aligned to cache line and integral @num_lines. * This however can be avoided for page sized since: - * -@start will be cache-line aligned already (being page aligned) + * -@paddr will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - slack = start & ~DCACHE_LINE_MASK; - sz += slack; - start -= slack; + sz += paddr & ~DCACHE_LINE_MASK; + paddr &= DCACHE_LINE_MASK; + vaddr &= DCACHE_LINE_MASK; } num_lines = DIV_ROUND_UP(sz, ARC_DCACHE_LINE_LEN); +#if (CONFIG_ARC_MMU_VER <= 2) + paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; +#endif + while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER > 2) /* * Just as for I$, in MMU v3, D$ ops also require * "tag" bits in DC_PTAG, "index" bits in FLDL,IVDL ops - * But we pass phy addr for both. This works since Linux - * doesn't support aliasing configs for D$, yet. - * Thus paddr is enough to provide both tag and index. */ - write_aux_reg(ARC_REG_DC_PTAG, start); + write_aux_reg(ARC_REG_DC_PTAG, paddr); + + write_aux_reg(aux_reg, vaddr); + vaddr += ARC_DCACHE_LINE_LEN; +#else + /* paddr contains stuffed vaddrs bits */ + write_aux_reg(aux_reg, paddr); #endif - write_aux_reg(aux_reg, start); - start += ARC_DCACHE_LINE_LEN; + paddr += ARC_DCACHE_LINE_LEN; } } +/* For kernel mappings cache operation: index is same as paddr */ +#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) + /* * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback) */ -static inline void __dc_line_op(unsigned long start, unsigned long sz, - const int cacheop) +static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, + unsigned long sz, const int cacheop) { unsigned long flags, tmp = tmp; int aux; @@ -366,7 +348,7 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, else aux = ARC_REG_DC_FLDL; - __dc_line_loop(start, sz, aux); + __dc_line_loop(paddr, vaddr, sz, aux); if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ wait_for_flush(); @@ -381,7 +363,8 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, #else #define __dc_entire_op(cacheop) -#define __dc_line_op(start, sz, cacheop) +#define __dc_line_op(paddr, vaddr, sz, cacheop) +#define __dc_line_op_k(paddr, sz, cacheop) #endif /* CONFIG_ARC_HAS_DCACHE */ @@ -391,75 +374,38 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, /* * I-Cache Aliasing in ARC700 VIPT caches * - * For fetching code from I$, ARC700 uses vaddr (embedded in program code) - * to "index" into SET of cache-line and paddr from MMU to match the TAG - * in the WAYS of SET. + * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag. + * The orig Cache Management Module "CDU" only required paddr to invalidate a + * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry. + * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching + * the exact same line. * - * However the CDU iterface (to flush/inv) lines from software, only takes - * paddr (to have simpler hardware interface). For simpler cases, using paddr - * alone suffices. - * e.g. 2-way-set-assoc, 16K I$ (8k MMU pg sz, 32b cache line size): - * way_sz = cache_sz / num_ways = 16k/2 = 8k - * num_sets = way_sz / line_sz = 8k/32 = 256 => 8 bits - * Ignoring the bottom 5 bits corresp to the off within a 32b cacheline, - * bits req for calc set-index = bits 12:5 (0 based). Since this range fits - * inside the bottom 13 bits of paddr, which are same for vaddr and paddr - * (with 8k pg sz), paddr alone can be safely used by CDU to unambigously - * locate a cache-line. - * - * However for a difft sized cache, say 32k I$, above math yields need - * for 14 bits of vaddr to locate a cache line, which can't be provided by - * paddr, since the bit 13 (0 based) might differ between the two. - * - * This lack of extra bits needed for correct line addressing, defines the - * classical problem of Cache aliasing with VIPT architectures - * num_aliases = 1 << extra_bits - * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz => 2 aliases - * 2-way-set-assoc, 64K I$ with 8k MMU pg sz => 4 aliases - * 2-way-set-assoc, 16K I$ with 8k MMU pg sz => NO aliases + * However for larger Caches (way-size > page-size) - i.e. in Aliasing config, + * paddr alone could not be used to correctly index the cache. * * ------------------ * MMU v1/v2 (Fixed Page Size 8k) * ------------------ * The solution was to provide CDU with these additonal vaddr bits. These - * would be bits [x:13], x would depend on cache-geom. + * would be bits [x:13], x would depend on cache-geometry, 13 comes from + * standard page size of 8k. * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the * orig 5 bits of paddr were anyways ignored by CDU line ops, as they * represent the offset within cache-line. The adv of using this "clumsy" - * interface for additional info was no new reg was needed in CDU. + * interface for additional info was no new reg was needed in CDU programming + * model. * * 17:13 represented the max num of bits passable, actual bits needed were * fewer, based on the num-of-aliases possible. * -for 2 alias possibility, only bit 13 needed (32K cache) * -for 4 alias possibility, bits 14:13 needed (64K cache) * - * Since vaddr was not available for all instances of I$ flush req by core - * kernel, the only safe way (non-optimal though) was to kill all possible - * lines which could represent an alias (even if they didnt represent one - * in execution). - * e.g. for 64K I$, 4 aliases possible, so we did - * flush start - * flush start | 0x01 - * flush start | 0x2 - * flush start | 0x3 - * - * The penalty was invoking the operation itself, since tag match is anyways - * paddr based, a line which didn't represent an alias would not match the - * paddr, hence wont be killed - * - * Note that aliasing concerns are independent of line-sz for a given cache - * geometry (size + set_assoc) because the extra bits required by line-sz are - * reduced from the set calc. - * e.g. 2-way-set-assoc, 32K I$ with 8k MMU pg sz and using math above - * 32b line-sz: 9 bits set-index-calc, 5 bits offset-in-line => 1 extra bit - * 64b line-sz: 8 bits set-index-calc, 6 bits offset-in-line => 1 extra bit - * * ------------------ * MMU v3 * ------------------ - * This ver of MMU supports var page sizes (1k-16k) - Linux will support - * 8k (default), 16k and 4k. + * This ver of MMU supports variable page sizes (1k-16k): although Linux will + * only support 8k (default), 16k and 4k. * However from hardware perspective, smaller page sizes aggrevate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. @@ -468,144 +414,53 @@ static inline void __dc_line_op(unsigned long start, unsigned long sz, */ /*********************************************************** - * Machine specific helpers for per line I-Cache invalidate. - * 3 routines to accpunt for 1, 2, 4 aliases possible + * Machine specific helper for per line I-Cache invalidate. */ - -static void __ic_line_inv_no_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { -#if (CONFIG_ARC_MMU_VER > 2) - write_aux_reg(ARC_REG_IC_PTAG, start); -#endif - write_aux_reg(ARC_REG_IC_IVIL, start); - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv_2_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { - -#if (CONFIG_ARC_MMU_VER > 2) - /* - * MMU v3, CDU prog model (for line ops) now uses a new IC_PTAG - * reg to pass the "tag" bits and existing IVIL reg only looks - * at bits relevant for "index" (details above) - * Programming Notes: - * -when writing tag to PTAG reg, bit chopping can be avoided, - * CDU ignores non-tag bits. - * -Ideally "index" must be computed from vaddr, but it is not - * avail in these rtns. So to be safe, we kill the lines in all - * possible indexes corresp to num of aliases possible for - * given cache config. - */ - write_aux_reg(ARC_REG_IC_PTAG, start); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x1 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, start | (0x1 << PAGE_SHIFT)); -#else - write_aux_reg(ARC_REG_IC_IVIL, start); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x01); -#endif - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv_4_alias(unsigned long start, int num_lines) -{ - while (num_lines-- > 0) { - -#if (CONFIG_ARC_MMU_VER > 2) - write_aux_reg(ARC_REG_IC_PTAG, start); - - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x3 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x2 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, - start & ~(0x1 << PAGE_SHIFT)); - write_aux_reg(ARC_REG_IC_IVIL, start | (0x3 << PAGE_SHIFT)); -#else - write_aux_reg(ARC_REG_IC_IVIL, start); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x01); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x02); - write_aux_reg(ARC_REG_IC_IVIL, start | 0x03); -#endif - start += ARC_ICACHE_LINE_LEN; - } -} - -static void __ic_line_inv(unsigned long start, unsigned long sz) +static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, + unsigned long sz) { unsigned long flags; - int num_lines, slack; + int num_lines; /* - * Ensure we properly floor/ceil the non-line aligned/sized requests - * and have @start - aligned to cache line, and integral @num_lines + * Ensure we properly floor/ceil the non-line aligned/sized requests: * However page sized flushes can be compile time optimised. - * -@start will be cache-line aligned already (being page aligned) + * -@paddr will be cache-line aligned already (being page aligned) * -@sz will be integral multiple of line size (being page sized). */ if (!(__builtin_constant_p(sz) && sz == PAGE_SIZE)) { - slack = start & ~ICACHE_LINE_MASK; - sz += slack; - start -= slack; + sz += paddr & ~ICACHE_LINE_MASK; + paddr &= ICACHE_LINE_MASK; + vaddr &= ICACHE_LINE_MASK; } num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - local_irq_save(flags); - (*___flush_icache_rtn) (start, num_lines); - local_irq_restore(flags); -} - -/* Unlike routines above, having vaddr for flush op (along with paddr), - * prevents the need to speculatively kill the lines in multiple sets - * based on ratio of way_sz : pg_sz - */ -static void __ic_line_inv_vaddr(unsigned long phy_start, - unsigned long vaddr, unsigned long sz) -{ - unsigned long flags; - int num_lines, slack; - unsigned int addr; - - slack = phy_start & ~ICACHE_LINE_MASK; - sz += slack; - phy_start -= slack; - num_lines = DIV_ROUND_UP(sz, ARC_ICACHE_LINE_LEN); - -#if (CONFIG_ARC_MMU_VER > 2) - vaddr &= ~ICACHE_LINE_MASK; - addr = phy_start; -#else +#if (CONFIG_ARC_MMU_VER <= 2) /* bits 17:13 of vaddr go as bits 4:0 of paddr */ - addr = phy_start | ((vaddr >> 13) & 0x1F); + paddr |= (vaddr >> PAGE_SHIFT) & 0x1F; #endif local_irq_save(flags); while (num_lines-- > 0) { #if (CONFIG_ARC_MMU_VER > 2) /* tag comes from phy addr */ - write_aux_reg(ARC_REG_IC_PTAG, addr); + write_aux_reg(ARC_REG_IC_PTAG, paddr); /* index bits come from vaddr */ write_aux_reg(ARC_REG_IC_IVIL, vaddr); vaddr += ARC_ICACHE_LINE_LEN; #else - /* this paddr contains vaddrs bits as needed */ - write_aux_reg(ARC_REG_IC_IVIL, addr); + /* paddr contains stuffed vaddrs bits */ + write_aux_reg(ARC_REG_IC_IVIL, paddr); #endif - addr += ARC_ICACHE_LINE_LEN; + paddr += ARC_ICACHE_LINE_LEN; } local_irq_restore(flags); } #else -#define __ic_line_inv(start, sz) #define __ic_line_inv_vaddr(pstart, vstart, sz) #endif /* CONFIG_ARC_HAS_ICACHE */ @@ -615,35 +470,72 @@ static void __ic_line_inv_vaddr(unsigned long phy_start, * Exported APIs */ -/* TBD: use pg_arch_1 to optimize this */ +/* + * Handle cache congruency of kernel and userspace mappings of page when kernel + * writes-to/reads-from + * + * The idea is to defer flushing of kernel mapping after a WRITE, possible if: + * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent + * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache) + * -In SMP, if hardware caches are coherent + * + * There's a corollary case, where kernel READs from a userspace mapped page. + * If the U-mapping is not congruent to to K-mapping, former needs flushing. + */ void flush_dcache_page(struct page *page) { - __dc_line_op((unsigned long)page_address(page), PAGE_SIZE, OP_FLUSH); + struct address_space *mapping; + + if (!cache_is_vipt_aliasing()) { + set_bit(PG_arch_1, &page->flags); + return; + } + + /* don't handle anon pages here */ + mapping = page_mapping(page); + if (!mapping) + return; + + /* + * pagecache page, file not yet mapped to userspace + * Make a note that K-mapping is dirty + */ + if (!mapping_mapped(mapping)) { + set_bit(PG_arch_1, &page->flags); + } else if (page_mapped(page)) { + + /* kernel reading from page with U-mapping */ + void *paddr = page_address(page); + unsigned long vaddr = page->index << PAGE_CACHE_SHIFT; + + if (addr_not_cache_congruent(paddr, vaddr)) + __flush_dcache_page(paddr, vaddr); + } } EXPORT_SYMBOL(flush_dcache_page); void dma_cache_wback_inv(unsigned long start, unsigned long sz) { - __dc_line_op(start, sz, OP_FLUSH_N_INV); + __dc_line_op_k(start, sz, OP_FLUSH_N_INV); } EXPORT_SYMBOL(dma_cache_wback_inv); void dma_cache_inv(unsigned long start, unsigned long sz) { - __dc_line_op(start, sz, OP_INV); + __dc_line_op_k(start, sz, OP_INV); } EXPORT_SYMBOL(dma_cache_inv); void dma_cache_wback(unsigned long start, unsigned long sz) { - __dc_line_op(start, sz, OP_FLUSH); + __dc_line_op_k(start, sz, OP_FLUSH); } EXPORT_SYMBOL(dma_cache_wback); /* - * This is API for making I/D Caches consistent when modifying code - * (loadable modules, kprobes, etc) + * This is API for making I/D Caches consistent when modifying + * kernel code (loadable modules, kprobes, kgdb...) * This is called on insmod, with kernel virtual address for CODE of * the module. ARC cache maintenance ops require PHY address thus we * need to convert vmalloc addr to PHY addr @@ -652,7 +544,6 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) { unsigned int tot_sz, off, sz; unsigned long phy, pfn; - unsigned long flags; /* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */ @@ -673,8 +564,13 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) /* Case: Kernel Phy addr (0x8000_0000 onwards) */ if (likely(kstart > PAGE_OFFSET)) { - __ic_line_inv(kstart, kend - kstart); - __dc_line_op(kstart, kend - kstart, OP_FLUSH); + /* + * The 2nd arg despite being paddr will be used to index icache + * This is OK since no alternate virtual mappings will exist + * given the callers for this case: kprobe/kgdb in built-in + * kernel code only. + */ + __sync_icache_dcache(kstart, kstart, kend - kstart); return; } @@ -692,42 +588,45 @@ void flush_icache_range(unsigned long kstart, unsigned long kend) pfn = vmalloc_to_pfn((void *)kstart); phy = (pfn << PAGE_SHIFT) + off; sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off); - local_irq_save(flags); - __dc_line_op(phy, sz, OP_FLUSH); - __ic_line_inv(phy, sz); - local_irq_restore(flags); + __sync_icache_dcache(phy, kstart, sz); kstart += sz; tot_sz -= sz; } } /* - * Optimised ver of flush_icache_range() with spec callers: ptrace/signals - * where vaddr is also available. This allows passing both vaddr and paddr - * bits to CDU for cache flush, short-circuting the current pessimistic algo - * which kills all possible aliases. - * An added adv of knowing that vaddr is user-vaddr avoids various checks - * and handling for k-vaddr, k-paddr as done in orig ver above + * General purpose helper to make I and D cache lines consistent. + * @paddr is phy addr of region + * @vaddr is typically user or kernel vaddr (vmalloc) + * Howver in one instance, flush_icache_range() by kprobe (for a breakpt in + * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will + * use a paddr to index the cache (despite VIPT). This is fine since since a + * built-in kernel page will not have any virtual mappings (not even kernel) + * kprobe on loadable module is different as it will have kvaddr. */ -void flush_icache_range_vaddr(unsigned long paddr, unsigned long u_vaddr, - int len) +void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) { - __ic_line_inv_vaddr(paddr, u_vaddr, len); - __dc_line_op(paddr, len, OP_FLUSH); + unsigned long flags; + + local_irq_save(flags); + __ic_line_inv_vaddr(paddr, vaddr, len); + __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); + local_irq_restore(flags); +} + +/* wrapper to compile time eliminate alignment checks in flush loop */ +void __inv_icache_page(unsigned long paddr, unsigned long vaddr) +{ + __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE); } /* - * XXX: This also needs to be optim using pg_arch_1 - * This is called when a page-cache page is about to be mapped into a - * user process' address space. It offers an opportunity for a - * port to ensure d-cache/i-cache coherency if necessary. + * wrapper to clearout kernel or userspace mappings of a page + * For kernel mappings @vaddr == @paddr */ -void flush_icache_page(struct vm_area_struct *vma, struct page *page) +void ___flush_dcache_page(unsigned long paddr, unsigned long vaddr) { - if (!(vma->vm_flags & VM_EXEC)) - return; - - __ic_line_inv((unsigned long)page_address(page), PAGE_SIZE); + __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV); } void flush_icache_all(void) @@ -756,6 +655,88 @@ noinline void flush_cache_all(void) } +#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING + +void flush_cache_mm(struct mm_struct *mm) +{ + flush_cache_all(); +} + +void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr, + unsigned long pfn) +{ + unsigned int paddr = pfn << PAGE_SHIFT; + + __sync_icache_dcache(paddr, u_vaddr, PAGE_SIZE); +} + +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + flush_cache_all(); +} + +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_page(page_address(page), u_vaddr); + __flush_dcache_page(page_address(page), page_address(page)); + +} + +#endif + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long u_vaddr, struct vm_area_struct *vma) +{ + void *kfrom = page_address(from); + void *kto = page_address(to); + int clean_src_k_mappings = 0; + + /* + * If SRC page was already mapped in userspace AND it's U-mapping is + * not congruent with K-mapping, sync former to physical page so that + * K-mapping in memcpy below, sees the right data + * + * Note that while @u_vaddr refers to DST page's userspace vaddr, it is + * equally valid for SRC page as well + */ + if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) { + __flush_dcache_page(kfrom, u_vaddr); + clean_src_k_mappings = 1; + } + + copy_page(kto, kfrom); + + /* + * Mark DST page K-mapping as dirty for a later finalization by + * update_mmu_cache(). Although the finalization could have been done + * here as well (given that both vaddr/paddr are available). + * But update_mmu_cache() already has code to do that for other + * non copied user pages (e.g. read faults which wire in pagecache page + * directly). + */ + set_bit(PG_arch_1, &to->flags); + + /* + * if SRC was already usermapped and non-congruent to kernel mapping + * sync the kernel mapping back to physical page + */ + if (clean_src_k_mappings) { + __flush_dcache_page(kfrom, kfrom); + } else { + set_bit(PG_arch_1, &from->flags); + } +} + +void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) +{ + clear_page(to); + set_bit(PG_arch_1, &page->flags); +} + + /********************************************************************** * Explicit Cache flush request from user space via syscall * Needed for JITs which generate code on the fly diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c index 014172ba8432..aa652e281324 100644 --- a/arch/arc/mm/extable.c +++ b/arch/arc/mm/extable.c @@ -27,7 +27,7 @@ int fixup_exception(struct pt_regs *regs) #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -long arc_copy_from_user_noinline(void *to, const void __user * from, +long arc_copy_from_user_noinline(void *to, const void __user *from, unsigned long n) { return __arc_copy_from_user(to, from, n); @@ -48,7 +48,7 @@ unsigned long arc_clear_user_noinline(void __user *to, } EXPORT_SYMBOL(arc_clear_user_noinline); -long arc_strncpy_from_user_noinline (char *dst, const char __user *src, +long arc_strncpy_from_user_noinline(char *dst, const char __user *src, long count) { return __arc_strncpy_from_user(dst, src, count); diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index af55aab803d2..689ffd86d5e9 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index 727d4794ea0f..4a177365b2c4 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -10,9 +10,6 @@ #include #include #include -#ifdef CONFIG_BLOCK_DEV_RAM -#include -#endif #include #include #include diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c index 3e5c92c79936..739e65f355de 100644 --- a/arch/arc/mm/ioremap.c +++ b/arch/arc/mm/ioremap.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include void __iomem *ioremap(unsigned long paddr, unsigned long size) { diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c new file mode 100644 index 000000000000..2e06d56e987b --- /dev/null +++ b/arch/arc/mm/mmap.c @@ -0,0 +1,78 @@ +/* + * ARC700 mmap + * + * (started from arm version - for VIPT alias handling) + * + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#define COLOUR_ALIGN(addr, pgoff) \ + ((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) + \ + (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1))) + +/* + * Ensure that shared mappings are correctly aligned to + * avoid aliasing issues with VIPT caches. + * We need to ensure that + * a specific page of an object is always mapped at a multiple of + * SHMLBA bytes. + */ +unsigned long +arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; + + /* + * We only need to do colour alignment if D cache aliases. + */ + if (aliasing) + do_align = filp || (flags & MAP_SHARED); + + /* + * We enforce the MAP_FIXED case. + */ + if (flags & MAP_FIXED) { + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + return -EINVAL; + return addr; + } + + if (len > TASK_SIZE) + return -ENOMEM; + + if (addr) { + if (do_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); +} diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 9b9ce23f4ec3..fe1c5a073afe 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -418,23 +418,53 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) local_irq_restore(flags); } -/* arch hook called by core VM at the end of handle_mm_fault( ), - * when a new PTE is entered in Page Tables or an existing one - * is modified. We aggresively pre-install a TLB entry +/* + * Called at the end of pagefault, for a userspace mapped page + * -pre-install the corresponding TLB entry into MMU + * -Finalize the delayed D-cache flush of kernel mapping of page due to + * flush_dcache_page(), copy_user_page() + * + * Note that flush (when done) involves both WBACK - so physical page is + * in sync as well as INV - so any non-congruent aliases don't remain */ - -void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress, +void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, pte_t *ptep) { + unsigned long vaddr = vaddr_unaligned & PAGE_MASK; + unsigned long paddr = pte_val(*ptep) & PAGE_MASK; - create_tlb(vma, vaddress, ptep); + create_tlb(vma, vaddr, ptep); + + /* + * Exec page : Independent of aliasing/page-color considerations, + * since icache doesn't snoop dcache on ARC, any dirty + * K-mapping of a code page needs to be wback+inv so that + * icache fetch by userspace sees code correctly. + * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it + * so userspace sees the right data. + * (Avoids the flush for Non-exec + congruent mapping case) + */ + if ((vma->vm_flags & VM_EXEC) || + addr_not_cache_congruent(paddr, vaddr)) { + struct page *page = pfn_to_page(pte_pfn(*ptep)); + + int dirty = test_and_clear_bit(PG_arch_1, &page->flags); + if (dirty) { + /* wback + inv dcache lines */ + __flush_dcache_page(paddr, paddr); + + /* invalidate any existing icache lines */ + if (vma->vm_flags & VM_EXEC) + __inv_icache_page(paddr, vaddr); + } + } } /* Read the Cache Build Confuration Registers, Decode them and save into * the cpuinfo structure for later use. * No Validation is done here, simply read/convert the BCRs */ -void __init read_decode_mmu_bcr(void) +void __cpuinit read_decode_mmu_bcr(void) { unsigned int tmp; struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */ @@ -466,7 +496,7 @@ void __init read_decode_mmu_bcr(void) char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) { int n = 0; - struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu; n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ", p_mmu->ver, TO_KB(p_mmu->pg_sz)); @@ -480,7 +510,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) return buf; } -void __init arc_mmu_init(void) +void __cpuinit arc_mmu_init(void) { char str[256]; struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 9df765dc7c3a..3357d26ffe54 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI ;---------------------------------------------------------------- ; VERIFY_PTE: Check if PTE permissions approp for executing code cmp_s r2, VMALLOC_START - mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE) + mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE) mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE) and r3, r0, r2 ; Mask out NON Flag bits from PTE @@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD mov_s r2, 0 lr r3, [ecr] btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access - or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access - or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE ; Above laddering takes care of XCHG access ; which is both Read and Write diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 4e20a1a5104d..b3700c064c06 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -224,3 +224,15 @@ MACHINE_START(ML509, "ml509") .init_smp = iss_model_init_smp, #endif MACHINE_END + +static const char *nsimosci_compat[] __initdata = { + "snps,nsimosci", + NULL, +}; + +MACHINE_START(NSIMOSCI, "nsimosci") + .dt_compat = nsimosci_compat, + .init_early = NULL, + .init_machine = plat_fpga_populate_dev, + .init_irq = NULL, +MACHINE_END diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig new file mode 100644 index 000000000000..1d3452100f1f --- /dev/null +++ b/arch/arc/plat-tb10x/Kconfig @@ -0,0 +1,29 @@ +# Abilis Systems TB10x platform kernel configuration file +# +# Author: Christian Ruppert +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +menuconfig ARC_PLAT_TB10X + bool "Abilis TB10x" + select COMMON_CLK + select PINCTRL + select PINMUX + select ARCH_REQUIRE_GPIOLIB + help + Support for platforms based on the TB10x home media gateway SOC by + Abilis Systems. TB10x is based on the ARC700 CPU architecture. + Say Y if you are building a kernel for one of the SOCs in this + series (e.g. TB100 or TB101). If in doubt say N. diff --git a/arch/arc/plat-tb10x/Makefile b/arch/arc/plat-tb10x/Makefile new file mode 100644 index 000000000000..89611d25ef35 --- /dev/null +++ b/arch/arc/plat-tb10x/Makefile @@ -0,0 +1,21 @@ +# Abilis Systems TB10x platform Makefile +# +# Author: Christian Ruppert +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include + +obj-y += tb10x.o diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c new file mode 100644 index 000000000000..06cb30929460 --- /dev/null +++ b/arch/arc/plat-tb10x/tb10x.c @@ -0,0 +1,45 @@ +/* + * Abilis Systems TB10x platform initialisation + * + * Copyright (C) Abilis Systems 2012 + * + * Author: Christian Ruppert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include + +#include + + +static void __init tb10x_platform_init(void) +{ + of_clk_init(NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *tb10x_compat[] __initdata = { + "abilis,arc-tb10x", + NULL, +}; + +MACHINE_START(TB10x, "tb10x") + .dt_compat = tb10x_compat, + .init_machine = tb10x_platform_init, +MACHINE_END diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1e31dac36a5f..49d993cee512 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -38,6 +38,7 @@ config ARM select HAVE_GENERIC_HARDIRQS select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_TIME_ACCOUNTING select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO @@ -109,9 +110,6 @@ config MIGHT_HAVE_PCI config SYS_SUPPORTS_APM_EMULATION bool -config GENERIC_GPIO - bool - config HAVE_TCM bool select GENERIC_ALLOCATOR @@ -491,13 +489,14 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" select ARCH_REQUIRE_GPIOLIB - select CPU_V7 + select CPU_PJ4 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select PINCTRL select PINCTRL_DOVE select PLAT_ORION_LEGACY select USB_ARCH_HAS_EHCI + select MVEBU_MBUS help Support for the Marvell Dove SoC 88AP510 @@ -511,6 +510,7 @@ config ARCH_KIRKWOOD select PINCTRL select PINCTRL_KIRKWOOD select PLAT_ORION_LEGACY + select MVEBU_MBUS help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. @@ -522,6 +522,7 @@ config ARCH_MV78XX0 select GENERIC_CLOCKEVENTS select PCI select PLAT_ORION_LEGACY + select MVEBU_MBUS help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -534,6 +535,7 @@ config ARCH_ORION5X select GENERIC_CLOCKEVENTS select PCI select PLAT_ORION_LEGACY + select MVEBU_MBUS help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -643,7 +645,7 @@ config ARCH_SHMOBILE select MULTI_IRQ_HANDLER select NEED_MACH_MEMORY_H select NO_IOPORT - select PINCTRL + select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help @@ -896,7 +898,6 @@ config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)" default y select ARCH_MULTI_V6_V7 - select ARCH_VEXPRESS select CPU_V7 config ARCH_MULTI_V6_V7 @@ -1055,6 +1056,7 @@ config PLAT_VERSATILE config ARM_TIMER_SP804 bool select CLKSRC_MMIO + select CLKSRC_OF if OF source arch/arm/mm/Kconfig @@ -1789,6 +1791,7 @@ config XEN depends on ARM && AEABI && OF depends on CPU_V7 && !CPU_V6 depends on !GENERIC_ATOMIC64 + select ARM_PSCI help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f57a6ba26e04..1d41908d5cda 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -245,11 +245,11 @@ choice on i.MX53. config DEBUG_IMX6Q_UART - bool "i.MX6Q Debug UART" + bool "i.MX6Q/DL Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q. + on i.MX6Q/DL. config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 47374085befd..1ba358ba16b8 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -309,7 +309,7 @@ define archhelp echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' echo ' uImage - U-Boot wrapped zImage' - echo ' bootpImage - Combined zImage and initial RAM disk' + echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 853e199ea89f..f0895c581a89 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -49,10 +49,12 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ + exynos4210-universal_c210.dtb \ exynos4412-odroidx.dtb \ exynos4412-smdk4412.dtb \ exynos4412-origen.dtb \ exynos5250-arndale.dtb \ + exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5440-ssdk5440.dtb @@ -134,10 +136,14 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ + omap3-igep0020.dtb \ + omap3-igep0030.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ @@ -155,9 +161,12 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7778-bockw.dtb \ r8a7779-marzen-reference.dtb \ + r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ sh73a0-kzm9g-reference.dtb \ + r8a73a4-ape6evm.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb @@ -168,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ +dtb-$(CONFIG_ARCH_SUNXI) += \ + sun4i-a10-cubieboard.dtb \ + sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ @@ -186,11 +197,13 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ tegra114-pluto.dtb +dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ + versatile-pb.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb \ - xenvm-4.2.dtb + vexpress-v2p-ca15_a7.dtb +dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 11b240c5d323..5302f79c05b7 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -43,7 +43,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -59,27 +59,27 @@ led@2 { label = "beaglebone:green:heartbeat"; - gpios = <&gpio2 21 0>; + gpios = <&gpio1 21 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; led@3 { label = "beaglebone:green:mmc0"; - gpios = <&gpio2 22 0>; + gpios = <&gpio1 22 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "beaglebone:green:usr2"; - gpios = <&gpio2 23 0>; + gpios = <&gpio1 23 0>; default-state = "off"; }; led@5 { label = "beaglebone:green:usr3"; - gpios = <&gpio2 24 0>; + gpios = <&gpio1 24 0>; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d6496440fcea..0423298a26fe 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -51,7 +51,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -60,7 +60,7 @@ }; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { status = "okay"; clock-frequency = <100000>; @@ -123,12 +123,12 @@ debounce-delay-ms = <5>; col-scan-delay-us = <2>; - row-gpios = <&gpio2 25 0 /* Bank1, pin25 */ - &gpio2 26 0 /* Bank1, pin26 */ - &gpio2 27 0>; /* Bank1, pin27 */ + row-gpios = <&gpio1 25 0 /* Bank1, pin25 */ + &gpio1 26 0 /* Bank1, pin26 */ + &gpio1 27 0>; /* Bank1, pin27 */ - col-gpios = <&gpio2 21 0 /* Bank1, pin21 */ - &gpio2 22 0>; /* Bank1, pin22 */ + col-gpios = <&gpio1 21 0 /* Bank1, pin21 */ + &gpio1 22 0>; /* Bank1, pin22 */ linux,keymap = <0x0000008b /* MENU */ 0x0100009e /* BACK */ @@ -147,14 +147,14 @@ switch@9 { label = "volume-up"; linux,code = <115>; - gpios = <&gpio1 2 1>; + gpios = <&gpio0 2 1>; gpio-key,wakeup; }; switch@10 { label = "volume-down"; linux,code = <114>; - gpios = <&gpio1 3 1>; + gpios = <&gpio0 3 1>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index f5a6162a4ff2..f67c360844f4 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; @@ -115,26 +115,26 @@ led@1 { label = "evmsk:green:usr0"; - gpios = <&gpio2 4 0>; + gpios = <&gpio1 4 0>; default-state = "off"; }; led@2 { label = "evmsk:green:usr1"; - gpios = <&gpio2 5 0>; + gpios = <&gpio1 5 0>; default-state = "off"; }; led@3 { label = "evmsk:green:mmc0"; - gpios = <&gpio2 6 0>; + gpios = <&gpio1 6 0>; linux,default-trigger = "mmc0"; default-state = "off"; }; led@4 { label = "evmsk:green:heartbeat"; - gpios = <&gpio2 7 0>; + gpios = <&gpio1 7 0>; linux,default-trigger = "heartbeat"; default-state = "off"; }; @@ -148,26 +148,26 @@ switch@1 { label = "button0"; linux,code = <0x100>; - gpios = <&gpio3 3 0>; + gpios = <&gpio2 3 0>; }; switch@2 { label = "button1"; linux,code = <0x101>; - gpios = <&gpio3 2 0>; + gpios = <&gpio2 2 0>; }; switch@3 { label = "button2"; linux,code = <0x102>; - gpios = <&gpio1 30 0>; + gpios = <&gpio0 30 0>; gpio-key,wakeup; }; switch@4 { label = "button3"; linux,code = <0x103>; - gpios = <&gpio3 5 0>; + gpios = <&gpio2 5 0>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 91fe4f148f80..1460d9b88adf 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -21,6 +21,8 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + d_can0 = &dcan0; + d_can1 = &dcan1; }; cpus { @@ -87,7 +89,7 @@ reg = <0x48200000 0x1000>; }; - gpio1: gpio@44e07000 { + gpio0: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; gpio-controller; @@ -98,7 +100,7 @@ interrupts = <96>; }; - gpio2: gpio@4804c000 { + gpio1: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -109,7 +111,7 @@ interrupts = <98>; }; - gpio3: gpio@481ac000 { + gpio2: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -120,7 +122,7 @@ interrupts = <32>; }; - gpio4: gpio@481ae000 { + gpio3: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; @@ -185,7 +187,7 @@ status = "disabled"; }; - i2c1: i2c@44e0b000 { + i2c0: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -195,7 +197,7 @@ status = "disabled"; }; - i2c2: i2c@4802a000 { + i2c1: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -205,7 +207,7 @@ status = "disabled"; }; - i2c3: i2c@4819c000 { + i2c2: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -225,7 +227,8 @@ dcan0: d_can@481cc000 { compatible = "bosch,d_can"; ti,hwmods = "d_can0"; - reg = <0x481cc000 0x2000>; + reg = <0x481cc000 0x2000 + 0x44e10644 0x4>; interrupts = <52>; status = "disabled"; }; @@ -233,13 +236,14 @@ dcan1: d_can@481d0000 { compatible = "bosch,d_can"; ti,hwmods = "d_can1"; - reg = <0x481d0000 0x2000>; + reg = <0x481d0000 0x2000 + 0x44e10644 0x4>; interrupts = <55>; status = "disabled"; }; timer1: timer@44e31000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; interrupts = <67>; ti,hwmods = "timer1"; @@ -247,21 +251,21 @@ }; timer2: timer@48040000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48040000 0x400>; interrupts = <68>; ti,hwmods = "timer2"; }; timer3: timer@48042000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48042000 0x400>; interrupts = <69>; ti,hwmods = "timer3"; }; timer4: timer@48044000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48044000 0x400>; interrupts = <92>; ti,hwmods = "timer4"; @@ -269,7 +273,7 @@ }; timer5: timer@48046000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48046000 0x400>; interrupts = <93>; ti,hwmods = "timer5"; @@ -277,7 +281,7 @@ }; timer6: timer@48048000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x48048000 0x400>; interrupts = <94>; ti,hwmods = "timer6"; @@ -285,7 +289,7 @@ }; timer7: timer@4804a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,am335x-timer"; reg = <0x4804a000 0x400>; interrupts = <95>; ti,hwmods = "timer7"; @@ -305,7 +309,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x48030000 0x400>; - interrupt = <65>; + interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; status = "disabled"; @@ -316,7 +320,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x481a0000 0x400>; - interrupt = <125>; + interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; status = "disabled"; @@ -399,5 +403,17 @@ 0x44d80000 0x2000>; /* M3 DMEM */ ti,hwmods = "wkup_m3"; }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + num-cs = <7>; + num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 474f760ecadf..e9b5bdae4908 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI AM3517 EVM (AM3517/05)"; diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts index 5eb26d7d9b4e..556868388a23 100644 --- a/arch/arm/boot/dts/am3517_mt_ventoux.dts +++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TeeJet Mt.Ventoux"; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 6403acdbb75f..2353b1f13704 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -30,86 +30,88 @@ }; soc { - serial@d0012000 { - clock-frequency = <200000000>; - status = "okay"; - }; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - /* - * This device is disabled by default, because - * using the SD card connector requires - * changing the default CON40 connector - * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a - * different connector - * "DB-88F6710_MPP_RGMII_SD_Jumper". - */ - status = "disabled"; - /* No CD or WP GPIOs */ - }; - - usb@d0050000 { - status = "okay"; - }; - - usb@d0051000 { - status = "okay"; - }; - - spi0: spi@d0010600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l25635e"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - }; - }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ + internal-regs { + serial@12000 { + clock-frequency = <200000000>; status = "okay"; }; - pcie@2,0 { - /* Port 1, Lane 0 */ + sata@a0000 { + nr-ports = <2>; status = "okay"; }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + /* + * This device is disabled by default, because + * using the SD card connector requires + * changing the default CON40 connector + * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a + * different connector + * "DB-88F6710_MPP_RGMII_SD_Jumper". + */ + status = "disabled"; + /* No CD or WP GPIOs */ + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; + }; + + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 58ee79372206..14e36e19d515 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -25,113 +25,115 @@ }; soc { - serial@d0012000 { - clock-frequency = <200000000>; - status = "okay"; - }; - timer@d0020300 { - clock-frequency = <600000000>; - status = "okay"; - }; - - pinctrl { - pwr_led_pin: pwr-led-pin { - marvell,pins = "mpp63"; - marvell,function = "gpo"; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; }; - - stat_led_pins: stat-led-pins { - marvell,pins = "mpp64", "mpp65"; - marvell,function = "gpio"; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_pin &stat_led_pins>; - - green_pwr_led { - label = "mirabox:green:pwr"; - gpios = <&gpio1 31 1>; - linux,default-trigger = "heartbeat"; - }; - - blue_stat_led { - label = "mirabox:blue:stat"; - gpios = <&gpio2 0 1>; - linux,default-trigger = "cpu0"; - }; - - green_stat_led { - label = "mirabox:green:stat"; - gpios = <&gpio2 1 1>; - default-state = "off"; - }; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins3>; - pinctrl-names = "default"; - status = "okay"; - /* - * No CD or WP GPIOs: SDIO interface used for - * Wifi/Bluetooth chip - */ - }; - - usb@d0050000 { - status = "okay"; - }; - - usb@d0051000 { - status = "okay"; - }; - - i2c@d0011000 { - status = "okay"; - clock-frequency = <100000>; - pca9505: pca9505@25 { - compatible = "nxp,pca9505"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x25>; - }; - }; - - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ + timer@20300 { + clock-frequency = <600000000>; status = "okay"; }; - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ + pinctrl { + pwr_led_pin: pwr-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; + + stat_led_pins: stat-led-pins { + marvell,pins = "mpp64", "mpp65"; + marvell,function = "gpio"; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_pin &stat_led_pins>; + + green_pwr_led { + label = "mirabox:green:pwr"; + gpios = <&gpio1 31 1>; + linux,default-trigger = "heartbeat"; + }; + + blue_stat_led { + label = "mirabox:blue:stat"; + gpios = <&gpio2 0 1>; + linux,default-trigger = "cpu0"; + }; + + green_stat_led { + label = "mirabox:green:stat"; + gpios = <&gpio2 1 1>; + default-state = "off"; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + ethernet@70000 { status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins3>; + pinctrl-names = "default"; + status = "okay"; + /* + * No CD or WP GPIOs: SDIO interface used for + * Wifi/Bluetooth chip + */ + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <100000>; + pca9505: pca9505@25 { + compatible = "nxp,pca9505"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x25>; + }; + }; + + pcie-controller { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 516dec31b469..130f8390a7e4 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -28,60 +28,62 @@ }; soc { - serial@d0012000 { - clock-frequency = <200000000>; - status = "okay"; - }; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; - phy1: ethernet-phy@1 { - reg = <1>; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Software Button"; + linux,code = <116>; + gpios = <&gpio0 6 1>; + }; }; }; - - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - }; - - usb@d0050000 { - status = "okay"; - }; - - usb@d0051000 { - status = "okay"; - }; }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@1 { - label = "Software Button"; - linux,code = <116>; - gpios = <&gpio0 6 1>; - }; - }; -}; + }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 758c4ea90344..550eb772c30e 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -16,7 +16,7 @@ * 370 and Armada XP SoC. */ -/include/ "skeleton.dtsi" +/include/ "skeleton64.dtsi" / { model = "Marvell Armada 370 and XP SoC"; @@ -28,204 +28,204 @@ }; }; - mpic: interrupt-controller@d0020000 { - compatible = "marvell,mpic"; - #interrupt-cells = <1>; - #size-cells = <1>; - interrupt-controller; - }; - - coherency-fabric@d0020200 { - compatible = "marvell,coherency-fabric"; - reg = <0xd0020200 0xb0>, - <0xd0021810 0x1c>; - }; - soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges; + ranges = <0 0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>; - serial@d0012000 { + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpic: interrupt-controller@20000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; + }; + + coherency-fabric@20200 { + compatible = "marvell,coherency-fabric"; + reg = <0x20200 0xb0>, <0x21810 0x1c>; + }; + + serial@12000 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012000 0x100>; + reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <41>; reg-io-width = <1>; status = "disabled"; - }; - serial@d0012100 { + }; + serial@12100 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012100 0x100>; + reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <42>; reg-io-width = <1>; status = "disabled"; - }; + }; - timer@d0020300 { - compatible = "marvell,armada-370-xp-timer"; - reg = <0xd0020300 0x30>, - <0xd0021040 0x30>; - interrupts = <37>, <38>, <39>, <40>, <5>, <6>; - clocks = <&coreclk 2>; - }; + timer@20300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0x20300 0x30>, <0x21040 0x30>; + interrupts = <37>, <38>, <39>, <40>, <5>, <6>; + clocks = <&coreclk 2>; + }; - addr-decoding@d0020000 { - compatible = "marvell,armada-addr-decoding-controller"; - reg = <0xd0020000 0x258>; - }; + sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <55>; + clocks = <&gateclk 15>, <&gateclk 30>; + clock-names = "0", "1"; + status = "disabled"; + }; - sata@d00a0000 { - compatible = "marvell,orion-sata"; - reg = <0xd00a0000 0x2400>; - interrupts = <55>; - clocks = <&gateclk 15>, <&gateclk 30>; - clock-names = "0", "1"; - status = "disabled"; - }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x4>; + }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; - }; - - ethernet@d0070000 { + ethernet@70000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0070000 0x2500>; + reg = <0x70000 0x2500>; interrupts = <8>; clocks = <&gateclk 4>; status = "disabled"; - }; + }; - ethernet@d0074000 { + ethernet@74000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0074000 0x2500>; + reg = <0x74000 0x2500>; interrupts = <10>; clocks = <&gateclk 3>; status = "disabled"; - }; + }; - i2c0: i2c@d0011000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0xd0011000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <31>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <31>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - i2c1: i2c@d0011100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0xd0011100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - rtc@10300 { - compatible = "marvell,orion-rtc"; - reg = <0xd0010300 0x20>; - interrupts = <50>; - }; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <50>; + }; - mvsdio@d00d4000 { - compatible = "marvell,orion-sdio"; - reg = <0xd00d4000 0x200>; - interrupts = <54>; - clocks = <&gateclk 17>; - status = "disabled"; - }; + mvsdio@d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + status = "disabled"; + }; - usb@d0050000 { - compatible = "marvell,orion-ehci"; - reg = <0xd0050000 0x500>; - interrupts = <45>; - status = "disabled"; - }; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <45>; + status = "disabled"; + }; - usb@d0051000 { - compatible = "marvell,orion-ehci"; - reg = <0xd0051000 0x500>; - interrupts = <46>; - status = "disabled"; - }; + usb@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x500>; + interrupts = <46>; + status = "disabled"; + }; - spi0: spi@d0010600 { - compatible = "marvell,orion-spi"; - reg = <0xd0010600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - spi1: spi@d0010680 { - compatible = "marvell,orion-spi"; - reg = <0xd0010680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-bootcs@d0010400 { - compatible = "marvell,mvebu-devbus"; - reg = <0xd0010400 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-bootcs@10400 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10400 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs0@d0010408 { - compatible = "marvell,mvebu-devbus"; - reg = <0xd0010408 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-cs0@10408 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10408 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs1@d0010410 { - compatible = "marvell,mvebu-devbus"; - reg = <0xd0010410 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-cs1@10410 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10410 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs2@d0010418 { - compatible = "marvell,mvebu-devbus"; - reg = <0xd0010418 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-cs2@10418 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10418 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs3@d0010420 { - compatible = "marvell,mvebu-devbus"; - reg = <0xd0010420 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; + devbus-cs3@10420 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10420 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; }; -}; - + }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 18f6eb47cc50..aee2b1866ce2 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -16,16 +16,11 @@ */ /include/ "armada-370-xp.dtsi" +/include/ "skeleton.dtsi" / { model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; - L2: l2-cache { - compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; - cache-id-part = <0x100>; - wt-override; - }; aliases { gpio0 = &gpio0; @@ -33,188 +28,198 @@ gpio2 = &gpio2; }; - mpic: interrupt-controller@d0020000 { - reg = <0xd0020a00 0x1d0>, - <0xd0021870 0x58>; - }; - soc { - system-controller@d0018200 { + ranges = <0 0xd0000000 0x0100000 /* internal registers */ + 0xe0000000 0xe0000000 0x8100000 /* PCIe */>; + internal-regs { + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; - reg = <0xd0018200 0x100>; - }; - - pinctrl { - compatible = "marvell,mv88f6710-pinctrl"; - reg = <0xd0018000 0x38>; - - sdio_pins1: sdio-pins1 { - marvell,pins = "mpp9", "mpp11", "mpp12", - "mpp13", "mpp14", "mpp15"; - marvell,function = "sd0"; + reg = <0x18200 0x100>; }; - sdio_pins2: sdio-pins2 { - marvell,pins = "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52"; - marvell,function = "sd0"; + L2: l2-cache { + compatible = "marvell,aurora-outer-cache"; + reg = <0x08000 0x1000>; + cache-id-part = <0x100>; + wt-override; }; - sdio_pins3: sdio-pins3 { - marvell,pins = "mpp48", "mpp49", "mpp50", - "mpp51", "mpp52", "mpp53"; - marvell,function = "sd0"; + interrupt-controller@20000 { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; - }; - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0x18000 0x38>; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; - gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; - ngpios = <2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; - coreclk: mvebu-sar@d0018230 { - compatible = "marvell,armada-370-core-clock"; - reg = <0xd0018230 0x08>; - #clock-cells = <1>; - }; - - gateclk: clock-gating-control@d0018220 { - compatible = "marvell,armada-370-gating-clock"; - reg = <0xd0018220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; - }; - - xor@d0060800 { - compatible = "marvell,orion-xor"; - reg = <0xd0060800 0x100 - 0xd0060A00 0x100>; - status = "okay"; - - xor00 { - interrupts = <51>; - dmacap,memcpy; - dmacap,xor; + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; - xor01 { - interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; }; - }; - xor@d0060900 { - compatible = "marvell,orion-xor"; - reg = <0xd0060900 0x100 - 0xd0060b00 0x100>; - status = "okay"; - - xor10 { - interrupts = <94>; - dmacap,memcpy; - dmacap,xor; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; }; - xor11 { - interrupts = <95>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; }; - }; - usb@d0050000 { - clocks = <&coreclk 0>; - }; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-370-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; - usb@d0051000 { - clocks = <&coreclk 0>; - }; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-370-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; - thermal@d0018300 { - compatible = "marvell,armada370-thermal"; - reg = <0xd0018300 0x4 - 0xd0018304 0x4>; - status = "okay"; - }; + xor@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60A00 0x100>; + status = "okay"; - pcie-controller { - compatible = "marvell,armada-370-pcie"; - status = "disabled"; - device_type = "pci"; + xor00 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; - #address-cells = <3>; - #size-cells = <2>; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; - bus-range = <0x00 0xff>; + xor10 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; - reg = <0xd0040000 0x2000>, <0xd0080000 0x2000>; + usb@50000 { + clocks = <&coreclk 0>; + }; - reg-names = "pcie0.0", "pcie1.0"; + usb@51000 { + clocks = <&coreclk 0>; + }; - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + thermal@18300 { + compatible = "marvell,armada370-thermal"; + reg = <0x18300 0x4 + 0x18304 0x4>; + status = "okay"; + }; - pcie@1,0 { + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; + #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; + bus-range = <0x00 0xff>; + + reg = <0x40000 0x2000>, <0x80000 0x2000>; + + reg-names = "pcie0.0", "pcie1.0"; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 54cc5bb705fb..d6cc8bf8272e 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -26,132 +26,134 @@ memory { device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2 GB */ + reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ }; soc { - serial@d0012000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012100 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012200 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012300 { - clock-frequency = <250000000>; - status = "okay"; - }; - - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <25>; - }; - - phy3: ethernet-phy@3 { - reg = <27>; - }; - }; - - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - ethernet@d0030000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@d0034000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; - - mvsdio@d00d4000 { - pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - }; - - usb@d0050000 { - status = "okay"; - }; - - usb@d0051000 { - status = "okay"; - }; - - usb@d0052000 { - status = "okay"; - }; - - spi0: spi@d0010600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p64"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - }; - }; - - pcie-controller { - status = "okay"; - - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ + internal-regs { + serial@12000 { + clock-frequency = <250000000>; status = "okay"; }; - pcie@2,0 { - /* Port 0, Lane 1 */ + serial@12100 { + clock-frequency = <250000000>; status = "okay"; }; - pcie@3,0 { - /* Port 0, Lane 2 */ + serial@12200 { + clock-frequency = <250000000>; status = "okay"; }; - pcie@4,0 { - /* Port 0, Lane 3 */ + serial@12300 { + clock-frequency = <250000000>; status = "okay"; }; - pcie@9,0 { - /* Port 2, Lane 0 */ + + sata@a0000 { + nr-ports = <2>; status = "okay"; }; - pcie@10,0 { - /* Port 3, Lane 0 */ + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <25>; + }; + + phy3: ethernet-phy@3 { + reg = <27>; + }; + }; + + ethernet@70000 { status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "sgmii"; + }; + + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + usb@52000 { + status = "okay"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 04f28a712b98..3ee63d128e27 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -26,138 +26,145 @@ memory { device_type = "memory"; - /* - * 4 GB of plug-in RAM modules by default but only 3GB - * are visible, the amount of memory available can be - * changed by the bootloader according the size of the - * module actually plugged + * 8 GB of plug-in RAM modules by default.The amount + * of memory available can be changed by the + * bootloader according the size of the module + * actually plugged. Only 7GB are usable because + * addresses from 0xC0000000 to 0xffffffff are used by + * the internal registers of the SoC. */ - reg = <0x00000000 0xC0000000>; + reg = <0x00000000 0x00000000 0x00000000 0xC0000000>, + <0x00000001 0x00000000 0x00000001 0x00000000>; }; soc { - serial@d0012000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012100 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012200 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012300 { - clock-frequency = <250000000>; - status = "okay"; - }; + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x1000000>; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <16>; - }; - - phy1: ethernet-phy@1 { - reg = <17>; - }; - - phy2: ethernet-phy@2 { - reg = <18>; - }; - - phy3: ethernet-phy@3 { - reg = <19>; - }; - }; - - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - ethernet@d0030000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "rgmii-id"; - }; - ethernet@d0034000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "rgmii-id"; - }; - - spi0: spi@d0010600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - - devbus-bootcs@d0010400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ + internal-regs { + serial@12000 { + clock-frequency = <250000000>; status = "okay"; }; - pcie@9,0 { - /* Port 2, Lane 0 */ + serial@12100 { + clock-frequency = <250000000>; status = "okay"; }; - pcie@10,0 { - /* Port 3, Lane 0 */ + serial@12200 { + clock-frequency = <250000000>; status = "okay"; }; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "rgmii-id"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "rgmii-id"; + }; + + spi0: spi@10600 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + }; + + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index c2c78459a4d4..f8eaa383e07f 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -25,159 +25,161 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; - }; + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + }; - cpu@1 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <1>; - clocks = <&cpuclk 1>; - }; + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; }; soc { - pinctrl { - compatible = "marvell,mv78230-pinctrl"; - reg = <0xd0018000 0x38>; + internal-regs { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0x18000 0x38>; - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; - }; - }; - - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <17>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>; - }; - - /* - * MV78230 has 2 PCIe units Gen2.0: One unit can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; }; - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>; }; - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; status = "disabled"; - }; + device_type = "pci"; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; +#address-cells = <3>; +#size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 885bf229eef7..f4029f015aff 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -26,196 +26,198 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; - }; + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + }; - cpu@1 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <1>; - clocks = <&cpuclk 1>; - }; + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; }; soc { - pinctrl { - compatible = "marvell,mv78260-pinctrl"; - reg = <0xd0018000 0x38>; + internal-regs { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0x18000 0x38>; - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; - ngpios = <3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - ethernet@d0034000 { + ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; + reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; - }; - - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; status = "disabled"; - }; + device_type = "pci"; - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0048000 0 0x2000>; - reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd004c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; + bus-range = <0x00 0xff>; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0042000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0082000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 23a5ac4490a8..6ab56bd35de9 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -27,277 +27,279 @@ cpus { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <0>; - clocks = <&cpuclk 0>; - }; + cpu@0 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <0>; + clocks = <&cpuclk 0>; + }; - cpu@1 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <1>; - clocks = <&cpuclk 1>; - }; + cpu@1 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <1>; + clocks = <&cpuclk 1>; + }; - cpu@2 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <2>; - clocks = <&cpuclk 2>; - }; + cpu@2 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <2>; + clocks = <&cpuclk 2>; + }; - cpu@3 { - device_type = "cpu"; - compatible = "marvell,sheeva-v7"; - reg = <3>; - clocks = <&cpuclk 3>; - }; + cpu@3 { + device_type = "cpu"; + compatible = "marvell,sheeva-v7"; + reg = <3>; + clocks = <&cpuclk 3>; + }; }; soc { - pinctrl { - compatible = "marvell,mv78460-pinctrl"; - reg = <0xd0018000 0x38>; + internal-regs { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0x18000 0x38>; - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - gpio0: gpio@d0018100 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; - gpio1: gpio@d0018140 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - gpio2: gpio@d0018180 { - compatible = "marvell,orion-gpio"; - reg = <0xd0018180 0x40>; - ngpios = <3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - ethernet@d0034000 { + ethernet@34000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0034000 0x2500>; + reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; - }; - - /* - * MV78460 has 4 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. Two units are - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0xd0042000 0xd0042000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0xd0044000 0xd0044000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0xd0048000 0xd0048000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0xd004c000 0xd004c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xd0082000 0xd0082000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xd0084000 0xd0084000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0xd0088000 0xd0088000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0xd008c000 0xd008c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; status = "disabled"; - }; + device_type = "pci"; - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>; - reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; + bus-range = <0x00 0xff>; - pcie@5,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - pcie@6,0 { - device_type = "pci"; - assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 10>; - status = "disabled"; - }; + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; - pcie@7,0 { - device_type = "pci"; - assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 11>; - status = "disabled"; - }; + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; - pcie@8,0 { - device_type = "pci"; - assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 12>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; }; }; }; - }; +}; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 9d04f04d4e39..46b785064dd8 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -23,159 +23,164 @@ memory { device_type = "memory"; - reg = <0x00000000 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ }; soc { - serial@d0012000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@d0012100 { - clock-frequency = <250000000>; - status = "okay"; - }; - pinctrl { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; - }; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; + ranges = <0 0 0xd0000000 0x100000 + 0xf0000000 0 0xf0000000 0x8000000>; - red_led { - label = "red_led"; - gpios = <&gpio1 17 1>; - default-state = "off"; - }; - - yellow_led { - label = "yellow_led"; - gpios = <&gpio1 19 1>; - default-state = "off"; - }; - - green_led { - label = "green_led"; - gpios = <&gpio1 21 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 28 0>; - }; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - - ethernet@d0070000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@d0074000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; - }; - ethernet@d0030000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@d0034000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; - i2c@d0011000 { - status = "okay"; - clock-frequency = <400000>; - }; - i2c@d0011100 { - status = "okay"; - clock-frequency = <400000>; - - s35390a: s35390a@30 { - compatible = "s35390a"; - reg = <0x30>; - }; - }; - sata@d00a0000 { - nr-ports = <2>; - status = "okay"; - }; - usb@d0050000 { - status = "okay"; - }; - usb@d0051000 { - status = "okay"; - }; - - devbus-bootcs@d0010400 { - status = "okay"; - ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; - }; - }; - - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ + internal-regs { + serial@12000 { + clock-frequency = <250000000>; status = "okay"; }; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; + }; + pinctrl { + led_pins: led-pins-0 { + marvell,pins = "mpp49", "mpp51", "mpp53"; + marvell,function = "gpio"; + }; + }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led { + label = "red_led"; + gpios = <&gpio1 17 1>; + default-state = "off"; + }; + + yellow_led { + label = "yellow_led"; + gpios = <&gpio1 19 1>; + default-state = "off"; + }; + + green_led { + label = "green_led"; + gpios = <&gpio1 21 1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 28 0>; + }; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "sgmii"; + }; + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + }; + i2c@11100 { + status = "okay"; + clock-frequency = <400000>; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + usb@50000 { + status = "okay"; + }; + usb@51000 { + status = "okay"; + }; + + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; + }; + + pcie-controller { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 29dfeb6d4a26..5b902f9a3af2 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -22,140 +22,140 @@ model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; - L2: l2-cache { - compatible = "marvell,aurora-system-cache"; - reg = <0xd0008000 0x1000>; - cache-id-part = <0x100>; - wt-override; - }; - - mpic: interrupt-controller@d0020000 { - reg = <0xd0020a00 0x2d0>, - <0xd0021070 0x58>; - }; - - armada-370-xp-pmsu@d0022000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0xd0022100 0x430>, - <0xd0020800 0x20>; - }; - soc { - serial@d0012200 { + internal-regs { + L2: l2-cache { + compatible = "marvell,aurora-system-cache"; + reg = <0x08000 0x1000>; + cache-id-part = <0x100>; + wt-override; + }; + + interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + }; + + armada-370-xp-pmsu@22000 { + compatible = "marvell,armada-370-xp-pmsu"; + reg = <0x22100 0x430>, <0x20800 0x20>; + }; + + serial@12200 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012200 0x100>; + reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <43>; reg-io-width = <1>; status = "disabled"; - }; - serial@d0012300 { + }; + serial@12300 { compatible = "snps,dw-apb-uart"; - reg = <0xd0012300 0x100>; + reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <44>; reg-io-width = <1>; status = "disabled"; - }; + }; - timer@d0020300 { + timer@20300 { marvell,timer-25Mhz; - }; + }; - coreclk: mvebu-sar@d0018230 { - compatible = "marvell,armada-xp-core-clock"; - reg = <0xd0018230 0x08>; - #clock-cells = <1>; - }; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-xp-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; - cpuclk: clock-complex@d0018700 { - #clock-cells = <1>; - compatible = "marvell,armada-xp-cpu-clock"; - reg = <0xd0018700 0xA0>; - clocks = <&coreclk 1>; - }; + cpuclk: clock-complex@18700 { + #clock-cells = <1>; + compatible = "marvell,armada-xp-cpu-clock"; + reg = <0x18700 0xA0>; + clocks = <&coreclk 1>; + }; - gateclk: clock-gating-control@d0018220 { - compatible = "marvell,armada-xp-gating-clock"; - reg = <0xd0018220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; - }; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-xp-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; - system-controller@d0018200 { + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; - reg = <0xd0018200 0x500>; - }; + reg = <0x18200 0x500>; + }; - ethernet@d0030000 { + ethernet@30000 { compatible = "marvell,armada-370-neta"; - reg = <0xd0030000 0x2500>; + reg = <0x30000 0x2500>; interrupts = <12>; clocks = <&gateclk 2>; status = "disabled"; - }; - - xor@d0060900 { - compatible = "marvell,orion-xor"; - reg = <0xd0060900 0x100 - 0xd0060b00 0x100>; - clocks = <&gateclk 22>; - status = "okay"; - - xor10 { - interrupts = <51>; - dmacap,memcpy; - dmacap,xor; }; - xor11 { - interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; - }; - xor@d00f0900 { - compatible = "marvell,orion-xor"; - reg = <0xd00F0900 0x100 - 0xd00F0B00 0x100>; - clocks = <&gateclk 28>; - status = "okay"; + xor@f0900 { + compatible = "marvell,orion-xor"; + reg = <0xF0900 0x100 + 0xF0B00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; - xor00 { - interrupts = <94>; - dmacap,memcpy; - dmacap,xor; + xor00 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; - xor01 { - interrupts = <95>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + usb@50000 { + clocks = <&gateclk 18>; }; - }; - usb@d0050000 { - clocks = <&gateclk 18>; - }; + usb@51000 { + clocks = <&gateclk 19>; + }; - usb@d0051000 { - clocks = <&gateclk 19>; - }; + usb@52000 { + compatible = "marvell,orion-ehci"; + reg = <0x52000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; - usb@d0052000 { - compatible = "marvell,orion-ehci"; - reg = <0xd0052000 0x500>; - interrupts = <47>; - clocks = <&gateclk 20>; - status = "disabled"; - }; - - thermal@d00182b0 { - compatible = "marvell,armadaxp-thermal"; - reg = <0xd00182b0 0x4 - 0xd00184d0 0x4>; - status = "okay"; + thermal@182b0 { + compatible = "marvell,armadaxp-thermal"; + reg = <0x182b0 0x4 + 0x184d0 0x4>; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 70b5ccbac234..84c4bef2d726 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -264,7 +264,7 @@ atmel,pins = <0 10 0x2 0x0 /* PA10 periph B */ 0 11 0x2 0x0 /* PA11 periph B */ - 0 24 0x2 0x0 /* PA24 periph B */ + 0 22 0x2 0x0 /* PA22 periph B */ 0 25 0x2 0x0 /* PA25 periph B */ 0 26 0x2 0x0 /* PA26 periph B */ 0 27 0x2 0x0 /* PA27 periph B */ diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index f8f7370e8669..bf18a735c37d 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,6 +108,7 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21 4 0>; + #dma-cells = <2>; }; pinctrl@fffff200 { @@ -533,6 +534,8 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 4 0>; + dmas = <&dma 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -542,6 +545,8 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 4 0>; + dmas = <&dma 1 13>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index b2961f1ea51b..8d25f889928e 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -57,6 +57,7 @@ compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -89,6 +90,8 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 4 0>; + dmas = <&dma 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -110,6 +113,7 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <20 4 0>; + #dma-cells = <2>; }; pinctrl@fffff400 { @@ -378,6 +382,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 4 6>; + dmas = <&dma 1 13>, + <&dma 1 14>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -387,6 +394,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 4 6>; + dmas = <&dma 1 15>, + <&dma 1 16>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts index 3b40d11d65e7..315250b4995e 100644 --- a/arch/arm/boot/dts/at91sam9x25ek.dts +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -11,7 +11,7 @@ /include/ "at91sam9x5ek.dtsi" / { - model = "Atmel AT91SAM9G25-EK"; + model = "Atmel AT91SAM9X25-EK"; compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; ahb { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 640b3bbbb706..1145ac330fb7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -104,12 +104,14 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <20 4 0>; + #dma-cells = <2>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; interrupts = <21 4 0>; + #dma-cells = <2>; }; pinctrl@fffff400 { @@ -465,6 +467,8 @@ compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 4 0>; + dmas = <&dma0 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -474,6 +478,8 @@ compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; interrupts = <26 4 0>; + dmas = <&dma1 1 0>; + dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -535,6 +541,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; interrupts = <9 4 6>; + dmas = <&dma0 1 7>, + <&dma0 1 8>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -546,6 +555,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; interrupts = <10 4 6>; + dmas = <&dma1 1 5>, + <&dma1 1 6>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -557,6 +569,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; interrupts = <11 4 6>; + dmas = <&dma0 1 9>, + <&dma0 1 10>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 62eceb4f0d3f..3f0239ec1bc5 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -19,11 +19,19 @@ chosen { }; + pinctrl@11400000 { + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + i2c2_bus: i2c2-bus { + samsung,pin-pud = <0>; + }; + }; + i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - gpios = <&gpb3 0 2 3 0>, - <&gpb3 1 2 3 0>; max77686@09 { compatible = "maxim,max77686"; @@ -167,21 +175,20 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - gpios = <&gpb3 2 2 3 0>, - <&gpb3 3 2 3 0>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; }; i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - /* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ - gpios = <&gpa0 6 3 0 0>, - <&gpa0 7 3 0 0>; - hdmiddc@50 { compatible = "samsung,exynos5-hdmiddc"; reg = <0x50>; @@ -191,19 +198,16 @@ i2c@12C90000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa1 2 3 3 0>, - <&gpa1 3 3 3 0>; }; i2c@12CA0000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; }; i2c@12CB0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa2 2 3 3 0>, - <&gpa2 3 3 3 0>; }; i2c@12CC0000 { @@ -213,8 +217,6 @@ i2c@12CD0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpb2 2 3 3 0>, - <&gpb2 3 3 3 0>; }; i2c@12CE0000 { @@ -236,15 +238,12 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; slot@0 { reg = <0>; bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; }; }; @@ -260,15 +259,13 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; slot@0 { reg = <0>; bus-width = <4>; - samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; - wp-gpios = <&gpc2 1 0 0 3>; - gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, - <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, - <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + wp-gpios = <&gpc2 1 0>; }; }; @@ -281,11 +278,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + /* See board-specific dts files for pin setup */ slot@0 { reg = <0>; bus-width = <4>; - /* See board-specific dts files for GPIOs */ }; }; @@ -294,9 +291,6 @@ }; spi_1: spi@12d30000 { - gpios = <&gpa2 4 2 3 0>, - <&gpa2 6 2 3 0>, - <&gpa2 7 2 3 0>; samsung,spi-src-clk = <0>; num-cs = <1>; }; @@ -306,7 +300,7 @@ }; hdmi { - hpd-gpio = <&gpx3 7 0xf 1 3>; + hpd-gpio = <&gpx3 7 0>; }; gpio-keys { @@ -314,7 +308,7 @@ power { label = "Power"; - gpios = <&gpx1 3 0 0x10000 0>; + gpios = <&gpx1 3 1>; linux,code = <116>; /* KEY_POWER */ gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index c5834a6c5bf4..c914357c0d89 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -50,6 +50,46 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; }; + spi1: spi@1f0e000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + spi-max-frequency = <30000000>; + reg = <0>; + partition@0 { + label = "U-Boot-SPL"; + reg = <0x00000000 0x00010000>; + read-only; + }; + partition@1 { + label = "U-Boot"; + reg = <0x00010000 0x00080000>; + read-only; + }; + partition@2 { + label = "U-Boot-Env"; + reg = <0x00090000 0x00010000>; + read-only; + }; + partition@3 { + label = "Kernel"; + reg = <0x000a0000 0x00280000>; + }; + partition@4 { + label = "Filesystem"; + reg = <0x00320000 0x00400000>; + }; + partition@5 { + label = "MAC-Address"; + reg = <0x007f0000 0x00010000>; + read-only; + }; + }; + }; }; nand_cs3@62000000 { status = "okay"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 3ade343f13cc..2c88313d2c7a 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -71,6 +71,60 @@ 0x28 0x00222222 0x00ffffff >; }; + ehrpwm0a_pins: pinmux_ehrpwm0a_pins { + pinctrl-single,bits = < + /* EPWM0A */ + 0xc 0x00000002 0x0000000f + >; + }; + ehrpwm0b_pins: pinmux_ehrpwm0b_pins { + pinctrl-single,bits = < + /* EPWM0B */ + 0xc 0x00000020 0x000000f0 + >; + }; + ehrpwm1a_pins: pinmux_ehrpwm1a_pins { + pinctrl-single,bits = < + /* EPWM1A */ + 0x14 0x00000002 0x0000000f + >; + }; + ehrpwm1b_pins: pinmux_ehrpwm1b_pins { + pinctrl-single,bits = < + /* EPWM1B */ + 0x14 0x00000020 0x000000f0 + >; + }; + ecap0_pins: pinmux_ecap0_pins { + pinctrl-single,bits = < + /* ECAP0_APWM0 */ + 0x8 0x20000000 0xf0000000 + >; + }; + ecap1_pins: pinmux_ecap1_pins { + pinctrl-single,bits = < + /* ECAP1_APWM1 */ + 0x4 0x40000000 0xf0000000 + >; + }; + ecap2_pins: pinmux_ecap2_pins { + pinctrl-single,bits = < + /* ECAP2_APWM2 */ + 0x4 0x00000004 0x0000000f + >; + }; + spi1_pins: pinmux_spi_pins { + pinctrl-single,bits = < + /* SIMO, SOMI, CLK */ + 0x14 0x00110100 0x00ff0f00 + >; + }; + spi1_cs0_pin: pinmux_spi1_cs0 { + pinctrl-single,bits = < + /* CS0 */ + 0x14 0x00000010 0x000000f0 + >; + }; }; serial0: serial@1c42000 { compatible = "ns16550a"; @@ -122,6 +176,46 @@ interrupts = <16>; status = "disabled"; }; + ehrpwm0: ehrpwm@01f00000 { + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x300000 0x2000>; + status = "disabled"; + }; + ehrpwm1: ehrpwm@01f02000 { + compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; + #pwm-cells = <3>; + reg = <0x302000 0x2000>; + status = "disabled"; + }; + ecap0: ecap@01f06000 { + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x306000 0x80>; + status = "disabled"; + }; + ecap1: ecap@01f07000 { + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x307000 0x80>; + status = "disabled"; + }; + ecap2: ecap@01f08000 { + compatible = "ti,da850-ecap", "ti,am33xx-ecap"; + #pwm-cells = <3>; + reg = <0x308000 0x80>; + status = "disabled"; + }; + spi1: spi@1f0e000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,da830-spi"; + reg = <0x30e000 0x1000>; + num-cs = <4>; + ti,davinci-spi-intr-line = <1>; + interrupts = <56>; + status = "disabled"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 9ac47d51c407..359694c78918 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -38,6 +38,11 @@ i2c7 = &i2c_7; }; + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + pd_mfc: mfc-power-domain@10023C40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023C40 0x20>; @@ -82,6 +87,11 @@ reg = <0x10440000 0x1000>; }; + sys_reg: sysreg { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -197,6 +207,8 @@ interrupts = <0 58 0>; clocks = <&clock 317>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; status = "disabled"; }; @@ -208,6 +220,8 @@ interrupts = <0 59 0>; clocks = <&clock 318>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; status = "disabled"; }; @@ -287,6 +301,8 @@ #size-cells = <0>; clocks = <&clock 327>, <&clock 159>; clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; status = "disabled"; }; @@ -300,6 +316,8 @@ #size-cells = <0>; clocks = <&clock 328>, <&clock 160>; clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; status = "disabled"; }; @@ -313,6 +331,16 @@ #size-cells = <0>; clocks = <&clock 329>, <&clock 161>; clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + status = "disabled"; + }; + + pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; + #pwm-cells = <2>; status = "disabled"; }; @@ -356,4 +384,16 @@ #dma-requests = <1>; }; }; + + fimd: fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock 140>, <&clock 283>; + clock-names = "sclk_fimd", "fimd"; + samsung,power-domain = <&pd_lcd0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1b30bc8e2654..524b90846df5 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -57,6 +57,10 @@ status = "okay"; }; + g2d@12800000 { + status = "okay"; + }; + codec@13400000 { samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index f52c86e2d424..91332b72acf5 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -30,16 +30,13 @@ }; sdhci@12530000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk2 2 2 3 3>; - gpios = <&gpk2 0 2 0 3>, - <&gpk2 1 2 0 3>, - <&gpk2 3 2 3 3>, - <&gpk2 4 2 3 3>, - <&gpk2 5 2 3 3>, - <&gpk2 6 2 3 3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + status = "okay"; + }; + + g2d@12800000 { status = "okay"; }; @@ -65,25 +62,32 @@ status = "okay"; }; + pinctrl@11000000 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + keypad@100A0000 { samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; linux,keypad-wakeup; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_rows &keypad_cols>; status = "okay"; - row-gpios = <&gpx2 0 3 3 0>, - <&gpx2 1 3 3 0>; - - col-gpios = <&gpx1 0 3 0 0>, - <&gpx1 1 3 0 0>, - <&gpx1 2 3 0 0>, - <&gpx1 3 3 0 0>, - <&gpx1 4 3 0 0>, - <&gpx1 5 3 0 0>, - <&gpx1 6 3 0 0>, - <&gpx1 7 3 0 0>; - key_1 { keypad,row = <0>; keypad,column = <3>; @@ -149,9 +153,7 @@ #address-cells = <1>; #size-cells = <0>; samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - gpios = <&gpd1 0 2 3 0>, - <&gpd1 1 2 3 0>; + samsung,i2c-max-bus-freq = <100000>; status = "okay"; eeprom@50 { @@ -166,9 +168,6 @@ }; spi_2: spi@13940000 { - gpios = <&gpc1 1 5 3 0>, - <&gpc1 3 5 3 0>, - <&gpc1 4 5 3 0>; status = "okay"; w25x80@0 { @@ -179,7 +178,7 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpc1 2 1 0 3>; + cs-gpio = <&gpc1 2 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts new file mode 100644 index 000000000000..345cdb51dcb7 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -0,0 +1,352 @@ +/* + * Samsung's Exynos4210 based Universal C210 board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Universal C210 board which is based on + * Samsung's Exynos4210 rev0 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung Universal C210 based on Exynos4210 rev0"; + compatible = "samsung,universal_c210", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; + }; + + mct@10050000 { + compatible = "none"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + vemmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2_8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe1 3 0>; + enable-active-high; + }; + + sdhci_emmc: sdhci@12510000 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + vol-up-key { + gpios = <&gpx2 0 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <1>; + }; + + vol-down-key { + gpios = <&gpx2 1 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <1>; + }; + + config-key { + gpios = <&gpx2 2 1>; + linux,code = <171>; + label = "config"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + camera-key { + gpios = <&gpx2 3 1>; + linux,code = <212>; + label = "camera"; + debounce-interval = <1>; + }; + + power-key { + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + + ok-key { + gpios = <&gpx3 5 1>; + linux,code = <352>; + label = "ok"; + debounce-interval = <1>; + }; + }; + + tsp_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "TSP_2_8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 3 0>; + enable-active-high; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + tsp@4a { + /* TBD: Atmel maXtouch touchscreen */ + reg = <0x4a>; + }; + }; + + i2c@138B0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + vdd_arm_reg: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "vdd_arm"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; + + pwm@139D0000 { + compatible = "samsung,s5p6440-pwm"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 15143bdbafb8..54710de82908 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -41,6 +41,7 @@ }; combiner:interrupt-controller@10440000 { + samsung,combiner-nr = <16>; interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, @@ -112,4 +113,11 @@ reg = <0x100C0000 0x100>; interrupts = <2 4>; }; + + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 36d4299789ef..c0f60f49cea6 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -26,6 +26,15 @@ cpu-offset = <0x8000>; }; + interrupt-controller@10440000 { + samsung,combiner-nr = <18>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>; + }; + mct@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 1fecf7666dc0..1c21bad32ca9 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -72,6 +72,27 @@ status = "okay"; }; + fimd@11c00000 { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <50000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; + serial@13800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index 874beeaef99d..dd564310d4a5 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -27,6 +27,14 @@ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; }; + g2d@10800000 { + status = "okay"; + }; + + g2d@10800000 { + status = "okay"; + }; + sdhci@12530000 { bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index d75c047e80a9..270b389e0a1b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,6 +26,15 @@ cpu-offset = <0x4000>; }; + interrupt-controller@10440000 { + samsung,combiner-nr = <20>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; + }; + mct@10050000 { compatible = "samsung,exynos4412-mct"; reg = <0x10050000 0x800>; @@ -51,4 +60,12 @@ <0x7 0 &gic 1 12 0>; }; }; + + mshc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 7496b8d633ea..e3380a7a285c 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -72,4 +72,11 @@ reg = <0x106E0000 0x1000>; interrupts = <0 72 0>; }; + + g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <0 89 0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 5de019cb0e58..02cfc76d002f 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -24,8 +24,266 @@ bootargs = "console=ttySAC2,115200"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + i2c@12C60000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + samsung,i2c-slave-addr = <0x66>; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-dvs-voltage = <1300000>; + s5m8767,pmic-buck3-dvs-voltage = <1100000>; + s5m8767,pmic-buck4-dvs-voltage = <1200000>; + s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>, + <&gpd1 1 0>, + <&gpd1 2 0>; + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, + <&gpx2 4 0>, + <&gpx2 5 0>; + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_28IO_DP_1.35V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD_COMMON1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_IOPERI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD_MPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_XPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD_COMMON2_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD_33ON_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_COMMON3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_ABB2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_USB_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_COMMON4_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDQ_MMC2_3_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + ldo18_reg: LDO18 { + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo22_reg: LDO22 { + regulator-name = "EXT_33_OFF"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; + }; + + ldo23_reg: LDO23 { + regulator-name = "EXT_28_OFF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; + }; + + ldo25_reg: LDO25 { + regulator-name = "PVDD_LDO25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; + }; + + ldo26_reg: LDO26 { + regulator-name = "EXT_18_OFF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + op_mode = <1>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_MEM_1.35V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1355000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_33_OFF_EXT1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; + }; + }; + }; }; i2c@12C70000 { @@ -69,15 +327,13 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; slot@0 { reg = <0>; bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>; }; }; @@ -93,14 +349,14 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + vmmc-supply = <&mmc_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; slot@0 { reg = <0>; bus-width = <4>; - samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; - gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, - <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, - <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + disable-wp; }; }; @@ -120,6 +376,73 @@ status = "disabled"; }; + gpio_keys { + compatible = "gpio-keys"; + + menu { + label = "SW-TACT2"; + gpios = <&gpx1 4 1>; + linux,code = <139>; + gpio-key,wakeup; + }; + + home { + label = "SW-TACT3"; + gpios = <&gpx1 5 1>; + linux,code = <102>; + gpio-key,wakeup; + }; + + up { + label = "SW-TACT4"; + gpios = <&gpx1 6 1>; + linux,code = <103>; + gpio-key,wakeup; + }; + + down { + label = "SW-TACT5"; + gpios = <&gpx1 7 1>; + linux,code = <108>; + gpio-key,wakeup; + }; + + back { + label = "SW-TACT6"; + gpios = <&gpx2 0 1>; + linux,code = <158>; + gpio-key,wakeup; + }; + + wakeup { + label = "SW-TACT7"; + gpios = <&gpx2 1 1>; + linux,code = <143>; + gpio-key,wakeup; + }; + }; + + hdmi { + hpd-gpio = <&gpx3 7 2>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + vdd-supply = <&ldo8_reg>; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 1>; + enable-active-high; + }; + + reg_hdmi_en: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi new file mode 100644 index 000000000000..d1650fb34c0a --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -0,0 +1,783 @@ +/* + * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpb1-0", "gpb1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpc4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpc4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpc4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + }; + + pinctrl@13400000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_i2c2_bus: cam-i2c2-bus { + samsung,pins = "gpe0-6", "gpe1-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samaung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_bayrgb_bus: cam-bayrgb-bus { + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", + "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", + "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", + "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", + "gpg2-0", "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + cam_port_a: cam-port-a { + samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3", + "gph1-0", "gph1-1", "gph1-2", "gph1-3", + "gph1-4", "gph1-5", "gph1-6", "gph1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + }; + + pinctrl@10d10000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_rxd: c2c-rxd { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + + c2c_txd: c2c-txd { + samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samaung,pin-drv = <0>; + }; + }; + + pinctrl@03680000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 872ae1f93c75..3e0c792e2767 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -30,8 +30,6 @@ i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; - gpios = <&gpb3 0 2 3 0>, - <&gpb3 1 2 3 0>; eeprom@50 { compatible = "samsung,s524ad0xd1"; @@ -42,8 +40,6 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; - gpios = <&gpb3 2 2 3 0>, - <&gpb3 3 2 3 0>; eeprom@51 { compatible = "samsung,s524ad0xd1"; @@ -74,8 +70,6 @@ i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; - gpios = <&gpa0 6 3 3 0>, - <&gpa0 7 3 3 0>; hdmiddc@50 { compatible = "samsung,exynos5-hdmiddc"; @@ -122,15 +116,12 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; slot@0 { reg = <0>; bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; }; }; @@ -146,17 +137,13 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; slot@0 { reg = <0>; bus-width = <4>; - samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; disable-wp; - gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, - <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, - <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>, - <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>, - <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>; }; }; @@ -169,10 +156,6 @@ }; spi_1: spi@12d30000 { - gpios = <&gpa2 4 2 3 0>, - <&gpa2 6 2 3 0>, - <&gpa2 7 2 3 0>; - w25q80bw@0 { #address-cells = <1>; #size-cells = <1>; @@ -181,7 +164,7 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpa2 5 1 0 3>; + cs-gpio = <&gpa2 5 0>; samsung,spi-feedback-delay = <0>; }; @@ -203,7 +186,7 @@ }; hdmi { - hpd-gpio = <&gpx3 7 0xf 1 3>; + hpd-gpio = <&gpx3 7 0>; }; codec@11000000 { @@ -212,9 +195,7 @@ }; i2s0: i2s@03830000 { - gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>, - <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>, - <&gpz 6 2 0 0>; + status = "okay"; }; i2s1: i2s@12D60000 { @@ -233,7 +214,7 @@ }; usb@12110000 { - samsung,vbus-gpio = <&gpx2 6 1 3 3>; + samsung,vbus-gpio = <&gpx2 6 0>; }; dp-controller { @@ -245,6 +226,22 @@ samsung,lane-count = <4>; }; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + /* 1280x800 */ + clock-frequency = <50000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <4>; + hback-porch = <4>; + hsync-len = <4>; + vback-porch = <4>; + vfront-porch = <4>; + vsync-len = <4>; + }; + }; + fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index babd9f9b1bf9..d449feb7e143 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -16,12 +16,31 @@ model = "Google Snow"; compatible = "google,snow", "samsung,exynos5250"; + aliases { + i2c104 = &i2c_104; + }; + + pinctrl@11400000 { + sd3_clk: sd3-clk { + samsung,pin-drv = <0>; + }; + + sd3_cmd: sd3-cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pin-drv = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; lid-switch { label = "Lid"; - gpios = <&gpx3 5 0 0x10000 0>; + gpios = <&gpx3 5 1>; linux,input-type = <5>; /* EV_SW */ linux,code = <0>; /* SW_LID */ debounce-interval = <1>; @@ -29,20 +48,142 @@ }; }; + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@12CA0000}>; + + our-claim-gpio = <&gpf0 3 1>; + their-claim-gpios = <&gpe0 4 1>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + /* Use ID 104 as a hint that we're on physical bus 4 */ + i2c_104: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + + keyboard-controller { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + linux,keymap = <0x0001003a /* CAPSLK */ + 0x0002003b /* F1 */ + 0x00030030 /* B */ + 0x00040044 /* F10 */ + 0x00060031 /* N */ + 0x0008000d /* = */ + 0x000a0064 /* R_ALT */ + + 0x01010001 /* ESC */ + 0x0102003e /* F4 */ + 0x01030022 /* G */ + 0x01040041 /* F7 */ + 0x01060023 /* H */ + 0x01080028 /* ' */ + 0x01090043 /* F9 */ + 0x010b000e /* BKSPACE */ + + 0x0200001d /* L_CTRL */ + 0x0201000f /* TAB */ + 0x0202003d /* F3 */ + 0x02030014 /* T */ + 0x02040040 /* F6 */ + 0x0205001b /* ] */ + 0x02060015 /* Y */ + 0x02070056 /* 102ND */ + 0x0208001a /* [ */ + 0x02090042 /* F8 */ + + 0x03010029 /* GRAVE */ + 0x0302003c /* F2 */ + 0x03030006 /* 5 */ + 0x0304003f /* F5 */ + 0x03060007 /* 6 */ + 0x0308000c /* - */ + 0x030b002b /* \ */ + + 0x04000061 /* R_CTRL */ + 0x0401001e /* A */ + 0x04020020 /* D */ + 0x04030021 /* F */ + 0x0404001f /* S */ + 0x04050025 /* K */ + 0x04060024 /* J */ + 0x04080027 /* ; */ + 0x04090026 /* L */ + 0x040b001c /* ENTER */ + + 0x0501002c /* Z */ + 0x0502002e /* C */ + 0x0503002f /* V */ + 0x0504002d /* X */ + 0x05050033 /* , */ + 0x05060032 /* M */ + 0x0507002a /* L_SHIFT */ + 0x05080035 /* / */ + 0x05090034 /* . */ + 0x050B0039 /* SPACE */ + + 0x06010002 /* 1 */ + 0x06020004 /* 3 */ + 0x06030005 /* 4 */ + 0x06040003 /* 2 */ + 0x06050009 /* 8 */ + 0x06060008 /* 7 */ + 0x0608000b /* 0 */ + 0x0609000a /* 9 */ + 0x060a0038 /* L_ALT */ + 0x060b006c /* DOWN */ + 0x060c006a /* RIGHT */ + + 0x07010010 /* Q */ + 0x07020012 /* E */ + 0x07030013 /* R */ + 0x07040011 /* W */ + 0x07050017 /* I */ + 0x07060016 /* U */ + 0x07070036 /* R_SHIFT */ + 0x07080019 /* P */ + 0x07090018 /* O */ + 0x070b0067 /* UP */ + 0x070c0069>; /* LEFT */ + }; + }; + }; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. */ dwmmc3@12230000 { slot@0 { - gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>, - <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>, - <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; }; }; usb@12110000 { - samsung,vbus-gpio = <&gpx1 1 1 3 3>; + samsung,vbus-gpio = <&gpx1 1 0>; }; fixed-rate-clocks { diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 28758e5dd15c..0673524238a6 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -18,6 +18,7 @@ */ /include/ "skeleton.dtsi" +/include/ "exynos5250-pinctrl.dtsi" / { compatible = "samsung,exynos5250"; @@ -44,6 +45,15 @@ i2c6 = &i2c_6; i2c7 = &i2c_7; i2c8 = &i2c_8; + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; }; pd_gsc: gsc-power-domain@0x10044000 { @@ -63,10 +73,22 @@ }; gic:interrupt-controller@10481000 { - compatible = "arm,cortex-a9-gic"; + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x10481000 0x1000>, <0x10482000 0x2000>; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; }; combiner:interrupt-controller@10440000 { @@ -115,6 +137,36 @@ interrupts = <1 2>, <22 4>; }; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03680000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x0368000 0x1000>; + interrupts = <0 47 0>; + }; + watchdog { compatible = "samsung,s3c2410-wdt"; reg = <0x101D0000 0x100>; @@ -200,6 +252,8 @@ #size-cells = <0>; clocks = <&clock 294>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; }; i2c_1: i2c@12C70000 { @@ -210,6 +264,8 @@ #size-cells = <0>; clocks = <&clock 295>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; }; i2c_2: i2c@12C80000 { @@ -220,6 +276,8 @@ #size-cells = <0>; clocks = <&clock 296>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; }; i2c_3: i2c@12C90000 { @@ -230,6 +288,8 @@ #size-cells = <0>; clocks = <&clock 297>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; }; i2c_4: i2c@12CA0000 { @@ -240,6 +300,8 @@ #size-cells = <0>; clocks = <&clock 298>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; }; i2c_5: i2c@12CB0000 { @@ -250,6 +312,8 @@ #size-cells = <0>; clocks = <&clock 299>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; }; i2c_6: i2c@12CC0000 { @@ -260,6 +324,8 @@ #size-cells = <0>; clocks = <&clock 300>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; }; i2c_7: i2c@12CD0000 { @@ -270,6 +336,8 @@ #size-cells = <0>; clocks = <&clock 301>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; }; i2c_8: i2c@12CE0000 { @@ -302,6 +370,8 @@ #size-cells = <0>; clocks = <&clock 304>, <&clock 154>; clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; }; spi_1: spi@12d30000 { @@ -315,6 +385,8 @@ #size-cells = <0>; clocks = <&clock 305>, <&clock 155>; clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; }; spi_2: spi@12d40000 { @@ -328,6 +400,8 @@ #size-cells = <0>; clocks = <&clock 306>, <&clock 156>; clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; }; dwmmc_0: dwmmc0@12200000 { @@ -381,6 +455,8 @@ samsung,supports-rstclr; samsung,supports-secdai; samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; }; i2s1: i2s@12D60000 { @@ -389,6 +465,8 @@ dmas = <&pdma1 12 &pdma1 11>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; }; i2s2: i2s@12D70000 { @@ -397,18 +475,41 @@ dmas = <&pdma0 12 &pdma0 11>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; }; usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; }; usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <0 71 0>; + + clocks = <&clock 285>; + clock-names = "usbhost"; + }; + + usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; }; amba { @@ -463,254 +564,6 @@ }; }; - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpa2: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpb0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpb1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpb2: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpb3: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpc2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpc3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpc4: gpio-controller@114002E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114002E0 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11400200 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400200 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@11400220 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400220 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@11400240 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400240 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@11400260 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400260 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11400C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11400C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11400C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11400C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400C60 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@13400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400000 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@13400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400020 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@13400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400040 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@13400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400060 0x20>; - #gpio-cells = <4>; - }; - - gpg0: gpio-controller@13400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400080 0x20>; - #gpio-cells = <4>; - }; - - gpg1: gpio-controller@134000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x134000A0 0x20>; - #gpio-cells = <4>; - }; - - gpg2: gpio-controller@134000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x134000C0 0x20>; - #gpio-cells = <4>; - }; - - gph0: gpio-controller@134000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x134000E0 0x20>; - #gpio-cells = <4>; - }; - - gph1: gpio-controller@13400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x13400100 0x20>; - #gpio-cells = <4>; - }; - - gpv0: gpio-controller@10D10000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10000 0x20>; - #gpio-cells = <4>; - }; - - gpv1: gpio-controller@10D10020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10020 0x20>; - #gpio-cells = <4>; - }; - - gpv2: gpio-controller@10D10040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10060 0x20>; - #gpio-cells = <4>; - }; - - gpv3: gpio-controller@10D10060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D10080 0x20>; - #gpio-cells = <4>; - }; - - gpv4: gpio-controller@10D10080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x10D100C0 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; - }; - - gsc_0: gsc@0x13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; @@ -776,4 +629,14 @@ samsung,enable-mask = <1>; }; }; + + fimd { + compatible = "samsung,exynos5250-fimd"; + interrupt-parent = <&combiner>; + reg = <0x14400000 0x40000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <18 4>, <18 5>, <18 6>; + clocks = <&clock 133>, <&clock 339>; + clock-names = "sclk_fimd", "fimd"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts new file mode 100644 index 000000000000..ef747b52b674 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -0,0 +1,39 @@ +/* + * SAMSUNG SD5v1 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5440.dtsi" + +/ { + model = "SAMSUNG SD5v1 board based on EXYNOS5440"; + compatible = "samsung,sd5v1", "samsung,exynos5440"; + + chosen { + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; + }; + + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; + }; + + gmac: ethernet@00230000 { + fixed_phy; + phy_addr = <1>; + }; + + spi { + status = "disabled"; + }; + +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index a21eb4cbe893..d55042beb5c5 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -16,12 +16,8 @@ model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; compatible = "samsung,ssdk5440", "samsung,exynos5440"; - memory { - reg = <0x80000000 0x80000000>; - }; - chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc"; + bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel early_printk no_console_suspend mem=2048M@0x80000000 console=ttySAC0,115200"; }; spi { diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 48cc96aa0b5f..f6b1c8973845 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -26,7 +26,11 @@ compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x2E1000 0x1000>, <0x2E2000 0x1000>; + reg = <0x2E1000 0x1000>, + <0x2E2000 0x1000>, + <0x2E4000 0x2000>, + <0x2E6000 0x2000>; + interrupts = <1 9 0xf04>; }; cpus { @@ -51,6 +55,14 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 52 4>, + <0 53 4>, + <0 54 4>, + <0 55 4>; + }; + timer { compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; @@ -61,6 +73,18 @@ clock-frequency = <50000000>; }; + cpufreq@160000 { + compatible = "samsung,exynos5440-cpufreq"; + reg = <0x160000 0x1000>; + interrupts = <0 57 0>; + operating-points = < + /* KHz uV */ + 1200000 1025000 + 1000000 975000 + 800000 925000 + >; + }; + serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; @@ -92,6 +116,8 @@ pinctrl { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; + interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, + <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>; interrupt-controller; #interrupt-cells = <2>; #gpio-cells = <2>; @@ -141,6 +167,17 @@ clock-names = "watchdog"; }; + gmac: ethernet@00230000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x00230000 0x8000>; + interrupt-parent = <&gic>; + interrupts = <0 31 4>; + interrupt-names = "macirq"; + phy-mode = "sgmii"; + clocks = <&clock 25>; + clock-names = "stmmaceth"; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -148,22 +185,22 @@ interrupt-parent = <&gic>; ranges; - pdma0: pdma@121A0000 { + pdma0: pdma@00121000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <0 34 0>; - clocks = <&clock 21>; + reg = <0x121000 0x1000>; + interrupts = <0 46 0>; + clocks = <&clock 8>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; }; - pdma1: pdma@121B0000 { + pdma1: pdma@00120000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x121000 0x1000>; - interrupts = <0 35 0>; - clocks = <&clock 21>; + reg = <0x120000 0x1000>; + interrupts = <0 47 0>; + clocks = <&clock 8>; clock-names = "apb_pclk"; #dma-cells = <1>; #dma-channels = <8>; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 035c13f9d3c0..da0588a04131 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -59,8 +59,33 @@ lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a>; - panel-enable-gpios = <&gpio1 18 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hback-porch = <15>; + hfront-porch = <8>; + vback-porch = <12>; + vfront-porch = <4>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; @@ -95,6 +120,15 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio1 29 0>; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 18 0>; + enable-active-high; + }; }; backlight { diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index e7484e4ea659..d107c4af321f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -29,6 +29,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; bus-width = <4>; + broken-cd; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index ad2d79324cd3..73fd7d0887b5 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -49,9 +49,15 @@ reg = <0x80000000 0x2000>; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <0 14 20 0 + 13 13 13 13>; + interrupt-names = "empty", "ssp0", "ssp1", "empty", + "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <8>; clocks = <&clks 15>; }; @@ -70,6 +76,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -78,6 +86,8 @@ reg = <0x80010000 0x2000>; interrupts = <15 14>; clocks = <&clks 33>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -305,9 +315,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <7 5 9 26 + 19 0 25 23 + 60 58 9 0 + 0 0 0 0>; + interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c", + "saif0", "empty", "auart0-rx", "auart0-tx", + "auart1-rx", "auart1-tx", "saif1", "empty", + "empty", "empty", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 16>; }; @@ -344,6 +364,8 @@ reg = <0x80034000 0x2000>; interrupts = <2 20>; clocks = <&clks 33>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -369,6 +391,8 @@ saif0: saif@80042000 { reg = <0x80042000 0x2000>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -379,16 +403,22 @@ saif1: saif@80046000 { reg = <0x80046000 0x2000>; + dmas = <&dma_apbx 10>; + dma-names = "rx-tx"; status = "disabled"; }; audio-out@80048000 { reg = <0x80048000 0x2000>; + dmas = <&dma_apbx 1>; + dma-names = "tx"; status = "disabled"; }; audio-in@8004c000 { reg = <0x8004c000 0x2000>; + dmas = <&dma_apbx 0>; + dma-names = "rx"; status = "disabled"; }; @@ -401,11 +431,15 @@ spdif@80054000 { reg = <0x80054000 2000>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; i2c@80058000 { reg = <0x80058000 0x2000>; + dmas = <&dma_apbx 3>; + dma-names = "rx-tx"; status = "disabled"; }; @@ -436,6 +470,8 @@ reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; + dmas = <&dma_apbx 6>, <&dma_apbx 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -444,6 +480,8 @@ reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; clocks = <&clks 32>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 6d8865bfb4b7..3d905d16cbec 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -72,7 +72,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_16bit_pins_a &lcdif_pins_apf28dev>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 5171667a7763..43bf3c796cba 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -94,7 +94,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_apx4>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a0d3e9f1738e..063e62059890 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -30,7 +30,6 @@ reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ - 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ @@ -120,13 +119,48 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <0>; /* 0 will enable the keeper */ + }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_18bit_pins_cfa10049 &lcdif_pins_cfa10049>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; }; @@ -183,6 +217,11 @@ usbphy1: usbphy@8007e000 { status = "okay"; }; + + lradc@80050000 { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + }; }; }; @@ -304,5 +343,14 @@ pwms = <&pwm 3 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; + + }; + + onewire@0 { + compatible = "w1-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&w1_gpio_pins>; + status = "okay"; + gpios = <&gpio1 21 0>; }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 2da316e04409..3637bf3b1d59 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -123,8 +123,33 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_evk>; - panel-enable-gpios = <&gpio3 30 0>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; }; can0: can@80032000 { @@ -285,6 +310,15 @@ gpio = <&gpio3 8 0>; enable-active-high; }; + + reg_lcd_3v3: lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index fd36e1cca104..5aa44e05c9f5 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -119,7 +119,32 @@ pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_m28>; + display = <&display>; status = "okay"; + + display: display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; }; can0: can@80032000 { @@ -220,6 +245,8 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 64af2381c1b0..600f7cb51f3e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -61,12 +61,24 @@ hsadc@80002000 { reg = <0x80002000 0x2000>; interrupts = <13 87>; + dmas = <&dma_apbh 12>; + dma-names = "rx"; status = "disabled"; }; - dma-apbh@80004000 { + dma_apbh: dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + interrupts = <82 83 84 85 + 88 88 88 88 + 88 88 88 88 + 87 86 0 0>; + interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3", + "gpmi0", "gmpi1", "gpmi2", "gmpi3", + "gpmi4", "gmpi5", "gpmi6", "gmpi7", + "hsadc", "lcdif", "empty", "empty"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 25>; }; @@ -86,6 +98,8 @@ interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; + dmas = <&dma_apbh 4>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -96,6 +110,8 @@ reg = <0x80010000 0x2000>; interrupts = <96 82>; clocks = <&clks 46>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -106,6 +122,8 @@ reg = <0x80012000 0x2000>; interrupts = <97 83>; clocks = <&clks 47>; + dmas = <&dma_apbh 1>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -116,6 +134,8 @@ reg = <0x80014000 0x2000>; interrupts = <98 84>; clocks = <&clks 48>; + dmas = <&dma_apbh 2>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -126,6 +146,8 @@ reg = <0x80016000 0x2000>; interrupts = <99 85>; clocks = <&clks 49>; + dmas = <&dma_apbh 3>; + dma-names = "rx-tx"; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -658,9 +680,19 @@ status = "disabled"; }; - dma-apbx@80024000 { + dma_apbx: dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + interrupts = <78 79 66 0 + 80 81 68 69 + 70 71 72 73 + 74 75 76 77>; + interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty", + "saif0", "saif1", "i2c0", "i2c1", + "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx", + "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx"; + #dma-cells = <1>; + dma-channels = <16>; clocks = <&clks 26>; }; @@ -692,6 +724,8 @@ reg = <0x80030000 0x2000>; interrupts = <38 86>; clocks = <&clks 55>; + dmas = <&dma_apbh 13>; + dma-names = "rx"; status = "disabled"; }; @@ -767,6 +801,8 @@ reg = <0x80042000 0x2000>; interrupts = <59 80>; clocks = <&clks 53>; + dmas = <&dma_apbx 4>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -781,6 +817,8 @@ reg = <0x80046000 0x2000>; interrupts = <58 81>; clocks = <&clks 54>; + dmas = <&dma_apbx 5>; + dma-names = "rx-tx"; fsl,saif-dma-channel = <5>; status = "disabled"; }; @@ -796,6 +834,8 @@ spdif@80054000 { reg = <0x80054000 0x2000>; interrupts = <45 66>; + dmas = <&dma_apbx 2>; + dma-names = "tx"; status = "disabled"; }; @@ -812,6 +852,8 @@ reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; + dmas = <&dma_apbx 6>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -823,6 +865,8 @@ reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; + dmas = <&dma_apbx 7>; + dma-names = "rx-tx"; fsl,i2c-dma-channel = <7>; status = "disabled"; }; @@ -847,6 +891,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + dmas = <&dma_apbx 8>, <&dma_apbx 9>; + dma-names = "rx", "tx"; fsl,auart-dma-channel = <8 9>; clocks = <&clks 45>; status = "disabled"; @@ -856,6 +902,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + dmas = <&dma_apbx 10>, <&dma_apbx 11>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -864,6 +912,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + dmas = <&dma_apbx 12>, <&dma_apbx 13>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -872,6 +922,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + dmas = <&dma_apbx 14>, <&dma_apbx 15>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -880,6 +932,8 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + dmas = <&dma_apbx 0>, <&dma_apbx 1>; + dma-names = "rx", "tx"; clocks = <&clks 45>; status = "disabled"; }; @@ -943,8 +997,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; + clocks = <&clks 57>, <&clks 57>, <&clks 64>; + clock-names = "ipg", "ahb", "enet_out"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 3cca7d39529d..9e8296e4c343 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -65,9 +65,13 @@ interrupt-parent = <&intc>; ranges; - dma-apbh@00110000 { + dma_apbh: dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + interrupts = <0 13 0x04>, <0 13 0x04>, <0 13 0x04>, <0 13 0x04>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; clocks = <&clks 106>; }; @@ -83,6 +87,8 @@ <&clks 150>, <&clks 149>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; fsl,gpmi-dma-channel = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index 8b119399025a..ff1aea0ee043 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -24,15 +24,15 @@ }; timer0: timer@13000000 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; timer1: timer@13000100 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; timer2: timer@13000200 { - compatible = "arm,sp804", "arm,primecell"; + compatible = "arm,integrator-cp-timer"; }; pic: pic@14000000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 761c4b69b25b..37aa7487d4d8 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -26,6 +26,11 @@ }; }; + pmu { + compatible = "arm,arm1136-pmu"; + interrupts = <3>; + }; + soc { compatible = "ti,omap-infra"; mpu { @@ -49,6 +54,18 @@ reg = <0x480FE000 0x1000>; }; + sdma: dma-controller@48056000 { + compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + reg = <0x48056000 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <64>; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; @@ -68,28 +85,28 @@ }; timer2: timer@4802a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4802a000 0x400>; interrupts = <38>; ti,hwmods = "timer2"; }; timer3: timer@48078000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48078000 0x400>; interrupts = <39>; ti,hwmods = "timer3"; }; timer4: timer@4807a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807a000 0x400>; interrupts = <40>; ti,hwmods = "timer4"; }; timer5: timer@4807c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807c000 0x400>; interrupts = <41>; ti,hwmods = "timer5"; @@ -97,7 +114,7 @@ }; timer6: timer@4807e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4807e000 0x400>; interrupts = <42>; ti,hwmods = "timer6"; @@ -105,7 +122,7 @@ }; timer7: timer@48080000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48080000 0x400>; interrupts = <43>; ti,hwmods = "timer7"; @@ -113,7 +130,7 @@ }; timer8: timer@48082000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48082000 0x400>; interrupts = <44>; ti,hwmods = "timer8"; @@ -121,7 +138,7 @@ }; timer9: timer@48084000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48084000 0x400>; interrupts = <45>; ti,hwmods = "timer9"; @@ -129,7 +146,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48086000 0x400>; interrupts = <46>; ti,hwmods = "timer10"; @@ -137,7 +154,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48088000 0x400>; interrupts = <47>; ti,hwmods = "timer11"; @@ -145,7 +162,7 @@ }; timer12: timer@4808a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x4808a000 0x400>; interrupts = <48>; ti,hwmods = "timer12"; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 9b0d07746cba..68282ee13e26 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -18,3 +18,49 @@ reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; + +&gpmc { + ranges = <0 0 0x08000000 0x04000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,ge28f256l18b85"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x04000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <10>; + gpmc,cs-rd-off-ns = <160>; + gpmc,cs-wr-off-ns = <160>; + gpmc,adv-on-ns = <20>; + gpmc,adv-rd-off-ns = <50>; + gpmc,adv-wr-off-ns = <50>; + gpmc,oe-on-ns = <60>; + gpmc,oe-off-ns = <120>; + gpmc,we-on-ns = <60>; + gpmc,we-off-ns = <120>; + gpmc,rd-cycle-ns = <170>; + gpmc,wr-cycle-ns = <170>; + gpmc,access-ns = <150>; + gpmc,page-burst-access-ns = <10>; + + partition@0 { + label = "bootloader"; + reg = <0 0x20000>; + }; + partition@0x20000 { + label = "params"; + reg = <0x20000 0x20000>; + }; + partition@0x40000 { + label = "kernel"; + reg = <0x40000 0x200000>; + }; + partition@0x240000 { + label = "file-system"; + reg = <0x240000 0x3dc0000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index af6560908905..da5b285b73be 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -29,6 +29,65 @@ pinctrl-single,function-mask = <0x3f>; }; + gpio1: gpio@48018000 { + compatible = "ti,omap2-gpio"; + reg = <0x48018000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@4801a000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801a000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@4801c000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801c000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@4801e000 { + compatible = "ti,omap2-gpio"; + reg = <0x4801e000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpmc: gpmc@6800a000 { + compatible = "ti,omap2420-gpmc"; + reg = <0x6800a000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2420-mcbsp"; reg = <0x48074000 0xff>; @@ -37,6 +96,9 @@ <60>; /* RX interrupt */ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@48076000 { @@ -47,10 +109,13 @@ <63>; /* RX interrupt */ interrupt-names = "tx", "rx"; ti,hwmods = "mcbsp2"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; timer1: timer@48028000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c3924457c9b6..054bc4439568 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -29,6 +29,76 @@ pinctrl-single,function-mask = <0x3f>; }; + gpio1: gpio@4900c000 { + compatible = "ti,omap2-gpio"; + reg = <0x4900c000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@4900e000 { + compatible = "ti,omap2-gpio"; + reg = <0x4900e000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@49010000 { + compatible = "ti,omap2-gpio"; + reg = <0x49010000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@49012000 { + compatible = "ti,omap2-gpio"; + reg = <0x49012000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@480b6000 { + compatible = "ti,omap2-gpio"; + reg = <0x480b6000 0x200>; + interrupts = <33>; + ti,hwmods = "gpio5"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpmc: gpmc@6e000000 { + compatible = "ti,omap2430-gpmc"; + reg = <0x6e000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2430-mcbsp"; reg = <0x48074000 0xff>; @@ -40,6 +110,9 @@ interrupt-names = "common", "tx", "rx", "rx_overflow"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@48076000 { @@ -52,6 +125,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@4808c000 { @@ -64,6 +140,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@4808e000 { @@ -76,6 +155,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp5: mcbsp@48096000 { @@ -88,10 +170,13 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; }; timer1: timer@49018000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 3705a81c1fc2..3046d1f81be0 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -13,6 +13,12 @@ model = "TI OMAP3 BeagleBoard xM"; compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ @@ -20,10 +26,6 @@ leds { compatible = "gpio-leds"; - pmu_stat { - label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 0>; /* LEDB */ - }; heartbeat { label = "beagleboard::usr0"; @@ -38,6 +40,16 @@ }; }; + pwmleds { + compatible = "pwm-leds"; + + pmu_stat { + label = "beagleboard::pmu_stat"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; + }; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "omap3beagle"; @@ -107,3 +119,10 @@ */ ti,pulldowns = <0x03a1c4>; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 02d23f15fd86..6eec69997607 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -7,12 +7,18 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI OMAP3 BeagleBoard"; compatible = "ti,omap3-beagle", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts new file mode 100644 index 000000000000..8a5cdcc6debd --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -0,0 +1,169 @@ +/* + * Author: Anil Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "devkit8000::led1"; + gpios = <&gpio6 26 0>; /* 186 -> LED1 */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "devkit8000::led2"; + gpios = <&gpio6 3 0>; /* 163 -> LED2 */ + default-state = "on"; + linux,default-trigger = "none"; + }; + + usr { + label = "devkit8000::led3"; + gpios = <&gpio6 4 0>; /* 164 -> LED3 */ + default-state = "on"; + linux,default-trigger = "usr"; + }; + + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "devkit8000"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + ti,audio-routing = + "Ext Spk", "PREDRIVEL", + "Ext Spk", "PREDRIVER", + "MAINMIC", "Main Mic", + "Main Mic", "Mic Bias 1"; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&wdt2 { + status = "disabled"; +}; + +&mcbsp1 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&mcbsp4 { + status = "disabled"; +}; + +&mcbsp5 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <16>; + + gpmc,sync-clk = <0>; + gpmc,cs-on = <0>; + gpmc,cs-rd-off = <44>; + gpmc,cs-wr-off = <44>; + gpmc,adv-on = <6>; + gpmc,adv-rd-off = <34>; + gpmc,adv-wr-off = <44>; + gpmc,we-off = <40>; + gpmc,oe-off = <54>; + gpmc,access = <64>; + gpmc,rd-cycle = <82>; + gpmc,wr-cycle = <82>; + gpmc,wr-access = <40>; + gpmc,wr-data-mux-bus = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index e8ba1c247a39..96d1c206a57b 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -7,12 +7,18 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; compatible = "ti,omap3-evm", "ti,omap3"; + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -59,3 +65,10 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi new file mode 100644 index 000000000000..f8fe3b748c3e --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -0,0 +1,122 @@ +/* + * Device Tree Source for IGEP Technology devices + * + * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "igep2"; + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; +}; + +&omap3_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */ + 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */ + 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ + 0x170 0 /* uart3_tx.uart3_tx OUTPUT | MODE0 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 0x0118 /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */ + 0x116 0x0118 /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */ + 0x118 0x0118 /* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */ + 0x11a 0x0118 /* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */ + 0x11c 0x0118 /* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */ + 0x11e 0x0118 /* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */ + 0x120 0x0100 /* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */ + 0x122 0x0100 /* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */ + 0x124 0x0100 /* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */ + 0x126 0x0100 /* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts new file mode 100644 index 000000000000..e2b98490cc9a --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -0,0 +1,56 @@ +/* + * Device Tree Source for IGEPv2 board + * + * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEPv2"; + compatible = "isee,omap3-igep0020", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&gpio1 26 0>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&gpio1 27 0>; + default-state = "off"; + }; + + user1 { + label = "omap3:red:user1"; + gpios = <&gpio1 28 0>; + default-state = "off"; + }; + + user2 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts new file mode 100644 index 000000000000..9dc48d262ffb --- /dev/null +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -0,0 +1,44 @@ +/* + * Device Tree Source for IGEP COM Module + * + * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Enric Balletbo i Serra + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "omap3-igep.dtsi" + +/ { + model = "IGEP COM Module"; + compatible = "isee,omap3-igep0030", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + boot { + label = "omap3:green:boot"; + gpios = <&twl_gpio 13 1>; + default-state = "on"; + }; + + user0 { + label = "omap3:red:user0"; + gpios = <&twl_gpio 18 1>; /* LEDA */ + default-state = "off"; + }; + + user1 { + label = "omap3:green:user1"; + gpios = <&twl_gpio 19 1>; /* LEDB */ + default-state = "off"; + }; + + user2 { + label = "omap3:red:user1"; + gpios = <&gpio1 16 1>; + default-state = "off"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 89808ce01673..a626c50041f6 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -11,17 +11,26 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap34xx.dtsi" / { - leds { - compatible = "gpio-leds"; + pwmleds { + compatible = "pwm-leds"; + overo { label = "overo:blue:COM"; - gpios = <&twl_gpio 19 0>; - linux,default-trigger = "mmc0"; + pwms = <&twl_pwmled 1 7812500>; + max-brightness = <127>; }; }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "overo"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -31,6 +40,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -55,3 +70,10 @@ &twl_gpio { ti,use-leds; }; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index a14f74bbce7c..99ba6e14ebf3 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -26,8 +26,14 @@ }; }; + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + ti,hwmods = "debugss"; + }; + /* - * The soc node represents the soc top level view. It is uses for IPs + * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { @@ -75,76 +81,101 @@ reg = <0x48200000 0x1000>; }; + sdma: dma-controller@48056000 { + compatible = "ti,omap3630-sdma", "ti,omap3430-sdma"; + reg = <0x48056000 0x1000>; + interrupts = <12>, + <13>, + <14>, + <15>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <96>; + }; + omap3_pmx_core: pinmux@48002030 { compatible = "ti,omap3-padconf", "pinctrl-single"; reg = <0x48002030 0x05cc>; #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + pinctrl-single,function-mask = <0x7f1f>; }; - omap3_pmx_wkup: pinmux@0x48002a58 { + omap3_pmx_wkup: pinmux@0x48002a00 { compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x48002a58 0x5c>; + reg = <0x48002a00 0x5c>; #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; + pinctrl-single,function-mask = <0x7f1f>; }; gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; + reg = <0x48310000 0x200>; + interrupts = <29>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@49050000 { compatible = "ti,omap3-gpio"; + reg = <0x49050000 0x200>; + interrupts = <30>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@49052000 { compatible = "ti,omap3-gpio"; + reg = <0x49052000 0x200>; + interrupts = <31>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@49054000 { compatible = "ti,omap3-gpio"; + reg = <0x49054000 0x200>; + interrupts = <32>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@49056000 { compatible = "ti,omap3-gpio"; + reg = <0x49056000 0x200>; + interrupts = <33>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@49058000 { compatible = "ti,omap3-gpio"; + reg = <0x49058000 0x200>; + interrupts = <34>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { @@ -192,6 +223,16 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { @@ -200,6 +241,11 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { @@ -208,6 +254,11 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; + dmas = <&sdma 15>, + <&sdma 16>, + <&sdma 23>, + <&sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi4: spi@480ba000 { @@ -216,22 +267,30 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc1"; ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; wdt2: wdt@48314000 { @@ -249,6 +308,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@49022000 { @@ -263,6 +325,9 @@ interrupt-names = "common", "tx", "rx", "sidetone"; ti,buffer-size = <1280>; ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@49024000 { @@ -277,6 +342,9 @@ interrupt-names = "common", "tx", "rx", "sidetone"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@49026000 { @@ -289,6 +357,9 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp5: mcbsp@48096000 { @@ -301,10 +372,13 @@ interrupt-names = "common", "tx", "rx"; ti,buffer-size = <128>; ti,hwmods = "mcbsp5"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; }; timer1: timer@48318000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; interrupts = <37>; ti,hwmods = "timer1"; @@ -312,28 +386,28 @@ }; timer2: timer@49032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49032000 0x400>; interrupts = <38>; ti,hwmods = "timer2"; }; timer3: timer@49034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49034000 0x400>; interrupts = <39>; ti,hwmods = "timer3"; }; timer4: timer@49036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49036000 0x400>; interrupts = <40>; ti,hwmods = "timer4"; }; timer5: timer@49038000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49038000 0x400>; interrupts = <41>; ti,hwmods = "timer5"; @@ -341,7 +415,7 @@ }; timer6: timer@4903a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903a000 0x400>; interrupts = <42>; ti,hwmods = "timer6"; @@ -349,7 +423,7 @@ }; timer7: timer@4903c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903c000 0x400>; interrupts = <43>; ti,hwmods = "timer7"; @@ -357,7 +431,7 @@ }; timer8: timer@4903e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4903e000 0x400>; interrupts = <44>; ti,hwmods = "timer8"; @@ -366,7 +440,7 @@ }; timer9: timer@49040000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x49040000 0x400>; interrupts = <45>; ti,hwmods = "timer9"; @@ -374,7 +448,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48086000 0x400>; interrupts = <46>; ti,hwmods = "timer10"; @@ -382,7 +456,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48088000 0x400>; interrupts = <47>; ti,hwmods = "timer11"; @@ -390,7 +464,7 @@ }; timer12: timer@48304000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48304000 0x400>; interrupts = <95>; ti,hwmods = "timer12"; @@ -428,5 +502,26 @@ }; }; + gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + #address-cells = <2>; + #size-cells = <1>; + }; + + usb_otg_hs: usb_otg_hs@480ab000 { + compatible = "ti,omap3-musb"; + reg = <0x480ab000 0x1000>; + interrupts = <92>, <93>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts new file mode 100644 index 000000000000..144ae43453c4 --- /dev/null +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap34xx.dtsi" + +/ { + model = "TI OMAP3430 SDP"; + compatible = "ti,omap3430-sdp", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + }; +}; + +/include/ "twl4030.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&gpmc { + ranges = <0 0 0x10000000 0x08000000>, + <1 0 0x28000000 0x08000000>, + <2 0 0x20000000 0x10000000>; + + nor@0,0 { + compatible = "cfi-flash"; + linux,mtd-name= "intel,pf48f6000m0y1be"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x08000000>; + bank-width = <2>; + + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + + partition@0 { + label = "bootloader-nor"; + reg = <0 0x40000>; + }; + partition@0x40000 { + label = "params-nor"; + reg = <0x40000 0x40000>; + }; + partition@0x80000 { + label = "kernel-nor"; + reg = <0x80000 0x200000>; + }; + partition@0x280000 { + label = "filesystem-nor"; + reg = <0x240000 0x7d80000>; + }; + }; + + nand@1,0 { + linux,mtd-name= "micron,mt29f1g08abb"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1 0 0x08000000>; + nand-bus-width = <8>; + + ti,nand-ecc-opt = "sw"; + gpmc,device-nand; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <36>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <24>; + gpmc,adv-wr-off-ns = <36>; + gpmc,oe-on-ns = <6>; + gpmc,oe-off-ns = <48>; + gpmc,we-on-ns = <6>; + gpmc,we-off-ns = <30>; + gpmc,rd-cycle-ns = <72>; + gpmc,wr-cycle-ns = <72>; + gpmc,access-ns = <54>; + gpmc,wr-access-ns = <30>; + + partition@0 { + label = "xloader-nand"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "bootloader-nand"; + reg = <0x80000 0x140000>; + }; + partition@0x1c0000 { + label = "params-nand"; + reg = <0x1c0000 0xc0000>; + }; + partition@0x280000 { + label = "kernel-nand"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "filesystem-nand"; + reg = <0x780000 0x7880000>; + }; + }; + + onenand@2,0 { + linux,mtd-name= "samsung,kfm2g16q2m-deb8"; + #address-cells = <1>; + #size-cells = <1>; + reg = <2 0 0x10000000>; + + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <84>; + gpmc,cs-wr-off-ns = <72>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <18>; + gpmc,oe-on-ns = <30>; + gpmc,oe-off-ns = <84>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <42>; + gpmc,rd-cycle-ns = <108>; + gpmc,wr-cycle-ns = <96>; + gpmc,access-ns = <78>; + gpmc,wr-data-mux-bus-ns = <30>; + + partition@0 { + label = "xloader-onenand"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "bootloader-onenand"; + reg = <0x80000 0x40000>; + }; + partition@0xc0000 { + label = "params-onenand"; + reg = <0xc0000 0x20000>; + }; + partition@0xe0000 { + label = "kernel-onenand"; + reg = <0xe0000 0x200000>; + }; + partition@0x2e0000 { + label = "filesystem-onenand"; + reg = <0x2e0000 0xfd20000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi new file mode 100644 index 000000000000..75ed4ae2e631 --- /dev/null +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -0,0 +1,28 @@ +/* + * Device Tree Source for OMAP34xx/OMAP35xx SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + cpus { + cpu@0 { + /* OMAP343x/OMAP35xx variants OPP1-5 */ + operating-points = < + /* kHz uV */ + 125000 975000 + 250000 1075000 + 500000 1200000 + 550000 1270000 + 600000 1350000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 96bf0287cb9f..f3447bc1b032 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -15,6 +15,19 @@ serial3 = &uart4; }; + cpus { + /* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */ + cpu@0 { + operating-points = < + /* kHz uV */ + 300000 1012500 + 600000 1200000 + 800000 1325000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + ocp { uart4: serial@49042000 { compatible = "ti,omap3-uart"; diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 75466d2abfb5..e30cdf0f5ac1 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi new file mode 100644 index 000000000000..03bd60deb52b --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "elpida_ecb240abacn.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio1 7 0>; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 0>; + linux,default-trigger = "mmc0"; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ + 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ + 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,non-removable; + bus-width = <4>; +}; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 73bc1a67e444..f1d8c217ce12 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap4460.dtsi" +/include/ "omap4-panda-common.dtsi" /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 4122efe31cfd..f8b221f0168e 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -7,202 +7,5 @@ */ /dts-v1/; -/include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" - -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "pandaboard::status1"; - gpios = <&gpio1 7 0>; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "pandaboard::status2"; - gpios = <&gpio1 8 0>; - linux,default-trigger = "mmc0"; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "PandaBoard"; - - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &dss_hdmi_pins - &tpd12s015_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - }; -}; - -/include/ "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in their EEPROM as EDID data. - * The EEPROM is connected as I2C slave device. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,non-removable; - bus-width = <4>; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&mcbsp2 { - status = "disabled"; -}; - -&mcbsp3 { - status = "disabled"; -}; - -&dmic { - status = "disabled"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -}; +/include/ "omap443x.dtsi" +/include/ "omap4-panda-common.dtsi" diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 43e5258a9372..a35d9cd58063 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap443x.dtsi" /include/ "elpida_ecb240abacn.dtsi" / { @@ -80,6 +80,32 @@ }; }; + pwmleds { + compatible = "pwm-leds"; + kpad { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + charging { + label = "omap4:green:chrg"; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&twl_pwm 1 7812500>; + brightness-levels = < + 0 10 20 30 40 + 50 60 70 80 90 + 100 110 120 127 + >; + default-brightness-level = <13>; + }; + sound { compatible = "ti,abe-twl6040"; ti,model = "SDP4430"; @@ -197,6 +223,15 @@ >; }; + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + 0xf2 0x100 /* mcspi1_clk.mcspi1_clk INPUT | MODE0 */ + 0xf4 0x100 /* mcspi1_somi.mcspi1_somi INPUT | MODE0 */ + 0xf6 0x100 /* mcspi1_simo.mcspi1_simo INPUT | MODE0 */ + 0xf8 0x100 /* mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/ + >; + }; + dss_hdmi_pins: pinmux_dss_hdmi_pins { pinctrl-single,pins = < 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ @@ -212,9 +247,40 @@ 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */ + 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */ + 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */ + 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; twl: twl@48 { @@ -253,10 +319,16 @@ /include/ "twl6030.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; /* @@ -279,6 +351,9 @@ }; &i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; /* @@ -292,12 +367,15 @@ }; &mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + eth@0 { compatible = "ks8851"; spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio2>; - interrupts = <2>; /* gpio line 34 */ + interrupts = <2 8>; /* gpio line 34, low triggered */ vdd-supply = <&vdd_eth>; }; }; @@ -428,3 +506,9 @@ &twl_usb_comparator { usb-supply = <&vusb>; }; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts index 6601e6af6092..7e04103779c4 100644 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ b/arch/arm/boot/dts/omap4-var-som.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap4.dtsi" +/include/ "omap443x.dtsi" / { model = "Variscite OMAP4 SOM"; @@ -68,7 +68,7 @@ spi-max-frequency = <24000000>; reg = <0>; interrupt-parent = <&gpio6>; - interrupts = <11>; /* gpio line 171 */ + interrupts = <11 8>; /* gpio line 171, low triggered */ vdd-supply = <&vdd_eth>; }; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index b7db1a2b6ca7..2a5642882c8a 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -94,6 +94,11 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <0 9 0x4>, + <0 10 0x4>; counter32k: counter@4a304000 { compatible = "ti,omap-counter32k"; @@ -118,15 +123,28 @@ pinctrl-single,function-mask = <0x7fff>; }; + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <0 12 0x4>, + <0 13 0x4>, + <0 14 0x4>, + <0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; + }; + gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; reg = <0x4a310000 0x200>; interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -137,7 +155,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -148,7 +166,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -159,7 +177,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -170,7 +188,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -181,7 +199,18 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <0 20 0x4>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; }; uart1: serial@4806a000 { @@ -260,6 +289,16 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { @@ -270,6 +309,11 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { @@ -280,6 +324,8 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; }; mcspi4: spi@480ba000 { @@ -290,6 +336,8 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { @@ -299,6 +347,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { @@ -307,6 +357,8 @@ interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { @@ -315,6 +367,8 @@ interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { @@ -323,6 +377,8 @@ interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { @@ -331,6 +387,8 @@ interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; }; wdt2: wdt@4a314000 { @@ -347,6 +405,9 @@ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; ti,hwmods = "mcpdm"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; }; dmic: dmic@4012e000 { @@ -356,6 +417,8 @@ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; ti,hwmods = "dmic"; + dmas = <&sdma 67>; + dma-names = "up_link"; }; mcbsp1: mcbsp@40122000 { @@ -367,6 +430,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@40124000 { @@ -378,6 +444,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@40126000 { @@ -389,6 +458,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; mcbsp4: mcbsp@48096000 { @@ -399,6 +471,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; }; keypad: keypad@4a31c000 { @@ -438,10 +513,15 @@ #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; + usb2_phy: usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>; + ctrl-module = <&omap_control_usb>; + }; }; timer1: timer@4a318000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; interrupts = <0 37 0x4>; ti,hwmods = "timer1"; @@ -449,28 +529,28 @@ }; timer2: timer@48032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48032000 0x80>; interrupts = <0 38 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48034000 0x80>; interrupts = <0 39 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48036000 0x80>; interrupts = <0 40 0x4>; ti,hwmods = "timer4"; }; timer5: timer@40138000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = <0 41 0x4>; @@ -479,7 +559,7 @@ }; timer6: timer@4013a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = <0 42 0x4>; @@ -488,7 +568,7 @@ }; timer7: timer@4013c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = <0 43 0x4>; @@ -497,7 +577,7 @@ }; timer8: timer@4013e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = <0 44 0x4>; @@ -507,7 +587,7 @@ }; timer9: timer@4803e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; @@ -515,7 +595,7 @@ }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap3430-timer"; reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; @@ -523,7 +603,7 @@ }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap4430-timer"; reg = <0x48088000 0x80>; interrupts = <0 47 0x4>; ti,hwmods = "timer11"; @@ -559,5 +639,26 @@ interrupts = <0 77 0x4>; }; }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a00233c 0x4>; + reg-names = "control_dev_conf", "otghs_control"; + ti,type = <1>; + }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,omap4-musb"; + reg = <0x4a0ab000 0x7ff>; + interrupts = <0 92 0x4>, <0 93 0x4>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; + usb-phy = <&usb2_phy>; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + ti,has-mailbox; + }; }; }; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi new file mode 100644 index 000000000000..cccf39af4925 --- /dev/null +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -0,0 +1,27 @@ +/* + * Device Tree Source for OMAP443x SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap4.dtsi" + +/ { + cpus { + cpu@0 { + /* OMAP443x variants OPP50-OPPNT */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi new file mode 100644 index 000000000000..2cf227c86099 --- /dev/null +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -0,0 +1,32 @@ +/* + * Device Tree Source for OMAP4460 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +/include/ "omap4.dtsi" + +/ { + cpus { + /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ + cpu@0 { + operating-points = < + /* kHz uV */ + 350000 1025000 + 700000 1200000 + 920000 1313000 + >; + clock-latency = <300000>; /* From legacy driver */ + }; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 54 0x4>, + <0 55 0x4>; + ti,hwmods = "debugss"; + }; +}; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 8722c15bbba2..982acd19477d 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -16,7 +16,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; /* 2 GB */ + reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; vmmcsd_fixed: fixedregulator-mmcsd { @@ -80,6 +80,68 @@ 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ >; }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */ + 0x1b4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 0x100 /* i2c2_scl INPUTENABLE | MODE0 */ + 0x17a 0x100 /* i2c2_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x13a 0x100 /* i2c3_scl INPUTENABLE | MODE0 */ + 0x13c 0x100 /* i2c3_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + 0xb8 0x100 /* i2c4_scl INPUTENABLE | MODE0 */ + 0xba 0x100 /* i2c4_sda INPUTENABLE | MODE0 */ + >; + }; + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x184 0x100 /* i2c5_scl INPUTENABLE | MODE0 */ + 0x186 0x100 /* i2c5_sda INPUTENABLE | MODE0 */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc 0x100 /* MCSPI2_CLK INPUTENABLE | MODE0 */ + 0xbe 0x100 /* MCSPI2_SIMO INPUTENABLE | MODE0 */ + 0xc0 0x118 /* MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/ + 0xc2 0x0 /* MCSPI2_CS MODE0*/ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ + 0x7a 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ + 0x7c 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ + 0x7e 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x164 0x101 /* MCSPI2_CLK INPUTENABLE | MODE1 */ + 0x168 0x101 /* MCSPI2_SIMO INPUTENABLE | MODE1 */ + 0x16a 0x101 /* MCSPI2_SOMI INPUTENABLE | MODE1 */ + 0x16c 0x101 /* MCSPI2_CS INPUTENABLE | MODE1 */ + >; + }; }; &mmc1 { @@ -106,7 +168,17 @@ status = "disabled"; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; +}; + &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; /* Pressure Sensor */ @@ -116,7 +188,17 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + clock-frequency = <400000>; +}; + &i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; /* Temperature Sensor */ @@ -126,6 +208,13 @@ }; }; +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + + clock-frequency = <400000>; +}; + &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; @@ -151,3 +240,22 @@ cs1-used; device-handle = <&samsung_K3PE0E000B>; }; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 790bb2a4b343..3dd7ff825828 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -18,6 +18,9 @@ /include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap5"; interrupt-parent = <&gic>; @@ -33,24 +36,32 @@ cpus { cpu@0 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - /* 14th PPI IRQ, active low level-sensitive */ - interrupts = <1 14 0x308>; - clock-frequency = <6144000>; - }; }; cpu@1 { compatible = "arm,cortex-a15"; - timer { - compatible = "arm,armv7-timer"; - /* 14th PPI IRQ, active low level-sensitive */ - interrupts = <1 14 0x308>; - clock-frequency = <6144000>; - }; }; }; + timer { + compatible = "arm,armv7-timer"; + /* PPI secure/nonsecure IRQ, active low level-sensitive */ + interrupts = <1 13 0x308>, + <1 14 0x308>, + <1 11 0x308>, + <1 10 0x308>; + clock-frequency = <6144000>; + }; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>, + <0x48214000 0x2000>, + <0x48216000 0x2000>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -76,6 +87,11 @@ #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>, + <0x45000000 0x4000>; + interrupts = <0 9 0x4>, + <0 10 0x4>; counter32k: counter@4ae04000 { compatible = "ti,omap-counter32k"; @@ -100,12 +116,16 @@ pinctrl-single,function-mask = <0x7fff>; }; - gic: interrupt-controller@48211000 { - compatible = "arm,cortex-a15-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>; + sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <0 12 0x4>, + <0 13 0x4>, + <0 14 0x4>, + <0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; }; gpio1: gpio@4ae10000 { @@ -113,10 +133,11 @@ reg = <0x4ae10000 0x200>; interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; + ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -127,7 +148,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -138,7 +159,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -149,7 +170,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -160,7 +181,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -171,7 +192,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -182,7 +203,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -193,7 +214,18 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <0 20 0x4>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; }; i2c1: i2c@48070000 { @@ -241,6 +273,65 @@ ti,hwmods = "i2c5"; }; + mcspi1: spi@48098000 { + compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, + <&sdma 37>, + <&sdma 38>, + <&sdma 39>, + <&sdma 40>, + <&sdma 41>, + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@4809a000 { + compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + mcspi3: spi@480b8000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; + }; + + mcspi4: spi@480ba000 { + compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; @@ -296,6 +387,8 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; }; mmc2: mmc@480b4000 { @@ -304,6 +397,8 @@ interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { @@ -312,6 +407,8 @@ interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { @@ -320,6 +417,8 @@ interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { @@ -328,10 +427,13 @@ interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; }; keypad: keypad@4ae1c000 { compatible = "ti,omap4-keypad"; + reg = <0x4ae1c000 0x400>; ti,hwmods = "kbd"; }; @@ -342,6 +444,9 @@ reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; ti,hwmods = "mcpdm"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; }; dmic: dmic@4012e000 { @@ -351,6 +456,8 @@ reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; ti,hwmods = "dmic"; + dmas = <&sdma 67>; + dma-names = "up_link"; }; mcbsp1: mcbsp@40122000 { @@ -362,6 +469,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; }; mcbsp2: mcbsp@40124000 { @@ -373,6 +483,9 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; }; mcbsp3: mcbsp@40126000 { @@ -384,10 +497,13 @@ interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; }; timer1: timer@4ae18000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; interrupts = <0 37 0x4>; ti,hwmods = "timer1"; @@ -395,28 +511,28 @@ }; timer2: timer@48032000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; interrupts = <0 38 0x4>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; interrupts = <0 39 0x4>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; interrupts = <0 40 0x4>; ti,hwmods = "timer4"; }; timer5: timer@40138000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = <0 41 0x4>; @@ -425,7 +541,7 @@ }; timer6: timer@4013a000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = <0 42 0x4>; @@ -435,7 +551,7 @@ }; timer7: timer@4013c000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = <0 43 0x4>; @@ -444,7 +560,7 @@ }; timer8: timer@4013e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = <0 44 0x4>; @@ -454,27 +570,34 @@ }; timer9: timer@4803e000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; }; timer10: timer@48086000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; }; timer11: timer@48088000 { - compatible = "ti,omap2-timer"; + compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; interrupts = <0 47 0x4>; ti,hwmods = "timer11"; ti,timer-pwm; }; + wdt2: wdt@4ae14000 { + compatible = "ti,omap5-wdt", "ti,omap3-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = <0 80 0x4>; + ti,hwmods = "wd_timer2"; + }; + emif1: emif@0x4c000000 { compatible = "ti,emif-4d5"; ti,hwmods = "emif1"; @@ -496,5 +619,53 @@ hw-caps-ll-interface; hw-caps-temp-alert; }; + + omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,omap-control-usb"; + reg = <0x4a002300 0x4>, + <0x4a002370 0x4>; + reg-names = "control_dev_conf", "phy_power_usb"; + ti,type = <2>; + }; + + omap_dwc3@4a020000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; + reg = <0x4a020000 0x1000>; + interrupts = <0 93 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + dwc3@4a030000 { + compatible = "synopsys,dwc3"; + reg = <0x4a030000 0x1000>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + tx-fifo-resize; + }; + }; + + ocp2scp { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + usb2_phy: usb2phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x7c>; + ctrl-module = <&omap_control_usb>; + }; + + usb3_phy: usb3phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts new file mode 100644 index 000000000000..f603c6946c29 --- /dev/null +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -0,0 +1,52 @@ +/* + * Device Tree Source for the APE6EVM board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a73a4.dtsi" + +/ { + model = "APE6EVM"; + compatible = "renesas,ape6evm", "renesas,r8a73a4"; + + chosen { + bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + ape6evm_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + + ethernet@8000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x08000000 0x1000>; + interrupt-parent = <&irqc1>; + interrupts = <8 0x4>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + vdd33a-supply = <&ape6evm_fixed_3v3>; + vddvario-supply = <&ape6evm_fixed_3v3>; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi new file mode 100644 index 000000000000..fde2a337d1ff --- /dev/null +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -0,0 +1,94 @@ +/* + * Device Tree Source for the r8a73a4 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Magnus Damm + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r8a73a4"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>, + <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>, + <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>, + <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>, + <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>, + <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>, + <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>; + }; + + irqc1: interrupt-controller@e61c0200 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0200 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>, + <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>, + <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>, + <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>, + <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>, + <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>, + <0 56 4>, <0 57 4>; + }; + + thermal@e61f0000 { + compatible = "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, + <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 4>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts new file mode 100644 index 000000000000..0076b1e8a0fb --- /dev/null +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -0,0 +1,32 @@ +/* + * Reference Device Tree Source for the Bock-W board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto + * + * based on r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7778.dtsi" + +/ { + model = "bockw"; + compatible = "renesas,bockw", "renesas,r8a7778"; + + chosen { + bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi new file mode 100644 index 000000000000..474373559bdc --- /dev/null +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -0,0 +1,35 @@ +/* + * Device Tree Source for Renesas r8a7778 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Kuninori Morimoto + * + * based on r8a7779 + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Simon Horman + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "renesas,r8a7778"; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + }; + }; + + gic: interrupt-controller@fe438000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfe438000 0x1000>, + <0xfe430000 0x100>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts new file mode 100644 index 000000000000..09a84fce89d6 --- /dev/null +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -0,0 +1,31 @@ +/* + * Device Tree Source for the Lager board + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "r8a7790.dtsi" + +/ { + model = "Lager"; + compatible = "renesas,lager", "renesas,r8a7790"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi new file mode 100644 index 000000000000..7a1711027e41 --- /dev/null +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for the r8a7790 SoC + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + compatible = "renesas,r8a7790"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1300000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu0>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 39b0458d365a..5000e0d42849 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -60,6 +60,8 @@ compatible = "atmel,hsmci"; reg = <0xf0000000 0x600>; interrupts = <21 4 0>; + dmas = <&dma0 2 0>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>; status = "disabled"; @@ -73,11 +75,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf0004000 0x100>; interrupts = <24 4 3>; - cs-gpios = <&pioD 13 0 - &pioD 14 0 /* conflicts with SCK0 and CANRX0 */ - &pioD 15 0 /* conflicts with CTS0 and CANTX0 */ - &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; status = "disabled"; @@ -111,6 +108,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0014000 0x4000>; interrupts = <18 4 6>; + dmas = <&dma0 2 7>, + <&dma0 2 8>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; @@ -122,6 +122,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf0018000 0x4000>; interrupts = <19 4 6>; + dmas = <&dma0 2 9>, + <&dma0 2 10>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; @@ -148,7 +151,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cnds,pc302-gem", "cdns,gem"; + compatible = "cdns,pc302-gem", "cdns,gem"; reg = <0xf0028000 0x100>; interrupts = <34 4 3>; pinctrl-names = "default"; @@ -167,6 +170,8 @@ compatible = "atmel,hsmci"; reg = <0xf8000000 0x600>; interrupts = <22 4 0>; + dmas = <&dma1 2 0>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>; status = "disabled"; @@ -178,6 +183,8 @@ compatible = "atmel,hsmci"; reg = <0xf8004000 0x600>; interrupts = <23 4 0>; + dmas = <&dma1 2 1>; + dma-names = "rxtx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>; status = "disabled"; @@ -191,11 +198,6 @@ compatible = "atmel,at91sam9x5-spi"; reg = <0xf8008000 0x100>; interrupts = <25 4 3>; - cs-gpios = <&pioC 25 0 - &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */ - &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */ - &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */ - >; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; @@ -294,6 +296,9 @@ compatible = "atmel,at91sam9x5-i2c"; reg = <0xf801c000 0x4000>; interrupts = <20 4 6>; + dmas = <&dma1 2 11>, + <&dma1 2 12>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -348,14 +353,14 @@ compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe600 0x200>; interrupts = <30 4 0>; - #dma-cells = <1>; + #dma-cells = <2>; }; dma1: dma-controller@ffffe800 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffe800 0x200>; interrupts = <31 4 0>; - #dma-cells = <1>; + #dma-cells = <2>; }; ramc0: ramc@ffffea00 { diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index d2739f8d7ae9..6bebfcdcb1d1 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -12,7 +12,7 @@ / { model = "Atmel SAMA5D34-EK"; - compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; + compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; ahb { apb { diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 1f8ed404626c..b336e7787cb3 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -32,6 +32,10 @@ ahb { apb { + spi0: spi@f0004000 { + cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; + }; + macb0: ethernet@f0028000 { phy-mode = "rgmii"; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index f33b5ccb7446..5972abb55f9c 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -44,6 +44,19 @@ regulator-always-on; regulator-boot-on; }; + + lan9220@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 0>; /* active low */ + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; }; &mmcif { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 3e4d383ac6d9..ec40bf78289e 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -38,6 +38,87 @@ <0xf0000100 0x100>; }; + irqpin0: irqpin@e6900000 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900000 4>, + <0xe6900010 4>, + <0xe6900020 1>, + <0xe6900040 1>, + <0xe6900060 1>; + interrupt-parent = <&gic>; + interrupts = <0 1 0x4 + 0 2 0x4 + 0 3 0x4 + 0 4 0x4 + 0 5 0x4 + 0 6 0x4 + 0 7 0x4 + 0 8 0x4>; + }; + + irqpin1: irqpin@e6900004 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4 + 0 10 0x4 + 0 11 0x4 + 0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4>; + control-parent; + }; + + irqpin2: irqpin@e6900008 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900008 4>, + <0xe6900018 4>, + <0xe6900028 1>, + <0xe6900048 1>, + <0xe6900068 1>; + interrupt-parent = <&gic>; + interrupts = <0 17 0x4 + 0 18 0x4 + 0 19 0x4 + 0 20 0x4 + 0 21 0x4 + 0 22 0x4 + 0 23 0x4 + 0 24 0x4>; + }; + + irqpin3: irqpin@e690000c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe690000c 4>, + <0xe690001c 4>, + <0xe690002c 1>, + <0xe690004c 1>, + <0xe690006c 1>; + interrupt-parent = <&gic>; + interrupts = <0 25 0x4 + 0 26 0x4 + 0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4 + 0 31 0x4 + 0 32 0x4>; + }; + i2c0: i2c@0xe6820000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index c511c4772efd..54d128d35681 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -113,6 +113,9 @@ reg = <0xb4100000 0x1000>; interrupts = <0 105 0x4>; status = "disabled"; + dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */ + <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */ + dma-names = "tx", "rx"; }; thermal@e07008c4 { diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index b4ca60f4eb42..45597fd91050 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -98,13 +98,24 @@ reg = <0xb2800000 0x1000>; interrupts = <0 29 0x4>; status = "disabled"; + dmas = <&dwdma0 0 0 0 0>; + dma-names = "data"; }; - dma@ea800000 { + dwdma0: dma@ea800000 { compatible = "snps,dma-spear1340"; reg = <0xea800000 0x1000>; interrupts = <0 19 0x4>; status = "disabled"; + + dma-channels = <8>; + #dma-cells = <3>; + dma-requests = <32>; + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + dma-masters = <2>; + data_width = <3 3 0 0>; }; dma@eb000000 { @@ -112,6 +123,15 @@ reg = <0xeb000000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; + + dma-requests = <32>; + dma-channels = <8>; + dma-masters = <2>; + #dma-cells = <3>; + chan_allocation_order = <1>; + chan_priority = <1>; + block_size = <0xfff>; + data_width = <3 3 0 0>; }; fsmc: flash@b0000000 { @@ -261,6 +281,9 @@ #size-cells = <0>; interrupts = <0 31 0x4>; status = "disabled"; + dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */ + <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */ + dma-names = "tx", "rx"; }; rtc@e0580000 { diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index b28fbf3408e3..6f82d9368948 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -14,13 +14,19 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + /* This is where the interrupt is routed on the S8815 board */ + external-bus@34000000 { + ethernet@300 { + interrupt-parent = <&gpio3>; + interrupts = <8 0x1>; + }; + }; + /* Custom board node with GPIO pins to active etc */ usb-s8815 { /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ ethernet-gpio { - gpios = <&gpio3 19 0x1>; - interrupts = <19 0x1>; - interrupt-parent = <&gpio3>; + gpios = <&gpio3 8 0x1>; }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 4a7c35d6726a..078ed7f618d7 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -22,8 +22,8 @@ bootargs = "earlyprintk console=ttyS0,115200"; }; - soc { - uart0: uart@01c28000 { + soc@01c20000 { + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 616990dc92db..72c1f27af7f3 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -10,14 +10,835 @@ reg = <0x80000000 0x40000000>; }; + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + nvidia,lock = <0>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + gmi_a19_pk7 { + nvidia,pins = "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5", + "gmi_cs6_n_pi3", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "spi4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "kb_col4_pq4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1", + "dap3_sclk_pp3"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <0>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,rcv-sel = <1>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "usb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + nvidia,lock = <0>; + nvidia,open-drain = <1>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + nvidia,enable-input = <1>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4", + "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb5", + "pbb6", + "pbb7"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pcc1 { + nvidia,pins = "pcc1", + "pcc2"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad13_ph5", + "gmi_ad8_ph0", + "gmi_clk_pk1"; + nvidia,function = "gmi"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "gmi"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0", + "gmi_cs0_n_pj0", + "gmi_cs2_n_pk3", + "gmi_cs4_n_pk2", + "gmi_cs7_n_pi6", + "gmi_dqs_p_pj3", + "gmi_iordy_pi5", + "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + gmi_cs3_n_pk4 { + nvidia,pins = "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3", + "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row6_pr6", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <0>; + }; + pu5 { + nvidia,pins = "pu5", + "pu6"; + nvidia,function = "displayb"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + nvidia,enable-input = <1>; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2", + "usb_vbus_en1_pn5"; + nvidia,function = "rsvd4"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + nvidia,enable-input = <0>; + }; + + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <2>; + nvidia,slew-rate-falling = <2>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <22>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <1>; + nvidia,schmitt = <0>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <1>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + nvidia,drive-type = <1>; + }; + }; + }; + serial@70006300 { status = "okay"; }; + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + battery: smart-battery { + compatible = "ti,bq20z45", "sbs,sbs-battery"; + reg = <0xb>; + battery-name = "battery"; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <100>; + }; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + tps51632 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1520000>; + regulator-boot-on; + regulator-always-on; + }; + + tps65090 { + compatible = "ti,tps65090"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <72 0x04>; /* gpio PJ0 */ + + vsys1-supply = <&vdd_ac_bat_reg>; + vsys2-supply = <&vdd_ac_bat_reg>; + vsys3-supply = <&vdd_ac_bat_reg>; + infet1-supply = <&vdd_ac_bat_reg>; + infet2-supply = <&vdd_ac_bat_reg>; + infet3-supply = <&tps65090_dcdc2_reg>; + infet4-supply = <&tps65090_dcdc2_reg>; + infet5-supply = <&tps65090_dcdc2_reg>; + infet6-supply = <&tps65090_dcdc2_reg>; + infet7-supply = <&tps65090_dcdc2_reg>; + vsys-l1-supply = <&vdd_ac_bat_reg>; + vsys-l2-supply = <&vdd_ac_bat_reg>; + + regulators { + tps65090_dcdc1_reg: dcdc1 { + regulator-name = "vdd-sys-5v0"; + regulator-always-on; + regulator-boot-on; + }; + + tps65090_dcdc2_reg: dcdc2 { + regulator-name = "vdd-sys-3v3"; + regulator-always-on; + regulator-boot-on; + }; + + dcdc3 { + regulator-name = "vdd-ao"; + regulator-always-on; + regulator-boot-on; + }; + + fet1 { + regulator-name = "vdd-lcd-bl"; + }; + + fet3 { + regulator-name = "vdd-modem-3v3"; + }; + + fet4 { + regulator-name = "avdd-lcd"; + }; + + fet5 { + regulator-name = "vdd-lvds"; + }; + + fet6 { + regulator-name = "vdd-sd-slot"; + regulator-always-on; + regulator-boot-on; + }; + + fet7 { + regulator-name = "vdd-com-3v3"; + }; + + ldo1 { + regulator-name = "vdd-sby-5v0"; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd-sby-3v3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + pmc { nvidia,invert-interrupt; }; + sdhci@78000400 { + cd-gpios = <&gpio 170 1>; /* gpio PV2 */ + bus-width = <4>; + status = "okay"; + }; + + sdhci@78000600 { + bus-width = <8>; + status = "okay"; + non-removable; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -30,4 +851,74 @@ clock-frequency = <32768>; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + dvdd_ts_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "dvdd_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 61 0>; /* GPIO PH5 */ + }; + + lcd_bl_en_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 58 0>; /* GPIO PH2 */ + }; + + usb1_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 108 0>; /* GPIO PN4 */ + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; + + usb3_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 86 0>; /* GPIO PK6 */ + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; + + vdd_hdmi_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_hdmi_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 81 0>; /* GPIO PK1 */ + vin-supply = <&tps65090_dcdc1_reg>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index c1110a9b2a91..629415ffd8dc 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -4,6 +4,13 @@ compatible = "nvidia,tegra114"; interrupt-parent = <&gic>; + aliases { + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + gic: interrupt-controller { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -33,6 +40,44 @@ #clock-cells = <1>; }; + apbdma: dma { + compatible = "nvidia,tegra114-apbdma"; + reg = <0x6000a000 0x1400>; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04>; + clocks = <&tegra_car 34>; + }; + ahb: ahb { compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; @@ -61,42 +106,189 @@ 0x70003000 0x40c>; /* Mux registers */ }; - serial@70006000 { + /* + * There are two serial driver i.e. 8250 based simple serial + * driver and APB DMA based serial driver for higher baudrate + * and performace. To enable the 8250 based driver, the compatible + * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable + * the APB DMA based serial driver, the comptible is + * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart". + */ + uarta: serial@70006000 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; + nvidia,dma-request-selector = <&apbdma 8>; status = "disabled"; clocks = <&tegra_car 6>; }; - serial@70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; + nvidia,dma-request-selector = <&apbdma 9>; status = "disabled"; clocks = <&tegra_car 192>; }; - serial@70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; + nvidia,dma-request-selector = <&apbdma 10>; status = "disabled"; clocks = <&tegra_car 55>; }; - serial@70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; + nvidia,dma-request-selector = <&apbdma 19>; status = "disabled"; clocks = <&tegra_car 65>; }; + pwm: pwm { + compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car 17>; + status = "disabled"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + clock-names = "div-clk"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + clock-names = "div-clk"; + status = "disabled"; + }; + + spi@7000d400 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 41>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 44>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000d800 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 46>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 68>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 104>; + clock-names = "spi"; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra114-spi"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 105>; + clock-names = "spi"; + status = "disabled"; + }; + rtc { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; @@ -104,6 +296,14 @@ clocks = <&tegra_car 4>; }; + kbc { + compatible = "nvidia,tegra114-kbc"; + reg = <0x7000e200 0x100>; + interrupts = <0 85 0x04>; + clocks = <&tegra_car 36>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; @@ -122,6 +322,38 @@ nvidia,ahb = <&ahb>; }; + sdhci@78000000 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disable"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disable"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disable"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disable"; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 4e3afdef28a8..a573b94b7c93 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -361,6 +361,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + memory-controller@7000f400 { emc-table@83250 { reg = <83250>; @@ -473,6 +482,9 @@ "Mic", "MIC1"; nvidia,ac97-controller = <&ac97>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; regulators { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index ae9d5a20834e..e7d5de4e00b9 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -416,6 +416,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -464,6 +470,17 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + kbc { status = "okay"; nvidia,debounce-delay-ms = <2>; @@ -669,5 +686,8 @@ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index a2d6d6541f83..ace23437da89 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -6,6 +6,10 @@ model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + pwm { + status = "okay"; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; @@ -54,5 +58,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index fd60940e4063..e3e0c9977df4 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -415,6 +415,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -445,6 +451,7 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { @@ -514,5 +521,8 @@ nvidia,audio-codec = <&alc5632>; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 289480026fbf..1a17cc30bb9d 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -52,5 +52,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 4ee700a33ca5..cee4c34010fe 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -517,6 +517,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; memory-controller@7000f400 { @@ -580,6 +586,7 @@ status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ bus-width = <4>; + keep-power-in-suspend; }; sdhci@c8000400 { @@ -593,6 +600,7 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { @@ -821,5 +829,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index c19025725918..50b3ec16b93a 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -458,6 +458,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; }; usb@c5008000 { diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 402b21004bef..742f0b38d21d 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -52,5 +52,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index a9f3f06580f5..9cc78a15d739 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -300,6 +300,15 @@ }; }; + pmc { + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + }; + usb@c5000000 { status = "okay"; nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ @@ -343,6 +352,17 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 190 1>; /* gpio PX6, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + poweroff { compatible = "gpio-poweroff"; gpios = <&gpio 191 1>; /* gpio PX7, active low */ @@ -376,5 +396,8 @@ compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index f544806e9618..dd38f1f03834 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -493,6 +493,12 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,sys-clock-req-active-high; }; usb@c5000000 { @@ -516,6 +522,7 @@ status = "okay"; power-gpios = <&gpio 86 0>; /* gpio PK6 */ bus-width = <4>; + keep-power-in-suspend; }; sdhci@c8000400 { @@ -529,6 +536,7 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { @@ -544,6 +552,17 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -620,5 +639,8 @@ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 258cf945f515..d2567f83aaff 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -496,6 +496,14 @@ pmc { nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <1000>; + nvidia,core-pwr-good-time = <0 3845>; + nvidia,core-pwr-off-time = <93727>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + nvidia,combined-power-req; }; usb@c5000000 { @@ -518,6 +526,7 @@ sdhci@c8000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { @@ -539,6 +548,7 @@ nvidia,repeat-delay-ms = <160>; nvidia,kbc-row-pins = <0 1 2>; nvidia,kbc-col-pins = <16 17>; + nvidia,wakeup-source; linux,keymap = <0x00000074 /* KEY_POWER */ 0x01000066 /* KEY_HOME */ 0x0101009E /* KEY_BACK */ @@ -573,5 +583,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&codec>; + + clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 94>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index fc7febc2b386..56a91106041b 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -209,7 +209,7 @@ compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; - + tegra_ac97: ac97 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; @@ -299,6 +299,7 @@ reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + status = "disabled"; }; rtc { @@ -442,31 +443,6 @@ #size-cells = <0>; }; - phy1: usb-phy@c5000400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000400 0x3c00>; - phy_type = "utmi"; - nvidia,has-legacy-mode; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - - phy2: usb-phy@c5004400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5004400 0x3c00>; - phy_type = "ulpi"; - clocks = <&tegra_car 94>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - - phy3: usb-phy@c5008400 { - compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008400 0x3C00>; - phy_type = "utmi"; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; - }; - usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; @@ -479,6 +455,15 @@ status = "disabled"; }; + phy1: usb-phy@c5000400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5000400 0x3c00>; + phy_type = "utmi"; + nvidia,has-legacy-mode; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5004000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5004000 0x4000>; @@ -489,6 +474,14 @@ status = "disabled"; }; + phy2: usb-phy@c5004400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5004400 0x3c00>; + phy_type = "ulpi"; + clocks = <&tegra_car 93>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + usb@c5008000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5008000 0x4000>; @@ -499,6 +492,14 @@ status = "disabled"; }; + phy3: usb-phy@c5008400 { + compatible = "nvidia,tegra20-usb-phy"; + reg = <0xc5008400 0x3c00>; + phy_type = "utmi"; + clocks = <&tegra_car 22>, <&tegra_car 127>; + clock-names = "phy", "pll_u"; + }; + sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 6248b2445b32..b732f7c13a66 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -253,6 +253,13 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci@78000000 { @@ -266,6 +273,7 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index adc88aa50eb6..e392bd2dab9b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -88,6 +88,7 @@ status = "okay"; power-gpios = <&gpio 28 0>; /* gpio PD4 */ bus-width = <4>; + keep-power-in-suspend; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 08163e145d57..d0db6c7e774f 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -100,5 +100,6 @@ status = "okay"; power-gpios = <&gpio 27 0>; /* gpio PD3 */ bus-width = <4>; + keep-power-in-suspend; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 65bf2b63174e..01b4c26fad96 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -307,6 +307,13 @@ pmc { status = "okay"; nvidia,invert-interrupt; + nvidia,suspend-mode = <2>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; sdhci@78000000 { @@ -320,6 +327,7 @@ sdhci@78000600 { status = "okay"; bus-width = <8>; + non-removable; }; clocks { @@ -509,5 +517,8 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + + clocks = <&tegra_car 184>, <&tegra_car 185>, <&tegra_car 120>; + clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 9fe7a92b4c85..15ded605142a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -286,6 +286,7 @@ reg = <0x7000a000 0x100>; #pwm-cells = <2>; clocks = <&tegra_car 17>; + status = "disabled"; }; rtc { diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index ed0bc9546837..b3034da00a37 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -23,6 +23,12 @@ compatible = "ti,twl4030-wdt"; }; + vcc: regulator-vdd1 { + compatible = "ti,twl4030-vdd1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1450000>; + }; + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; @@ -67,7 +73,7 @@ #interrupt-cells = <1>; }; - twl4030-usb { + usb2_phy: twl4030-usb { compatible = "ti,twl4030-usb"; interrupts = <10>, <4>; usb1v5-supply = <&vusb1v5>; @@ -75,4 +81,14 @@ usb3v1-supply = <&vusb3v1>; usb_mode = <1>; }; + + twl_pwm: pwm { + compatible = "ti,twl4030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + compatible = "ti,twl4030-pwmled"; + #pwm-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 9996cfc5ee80..2e3bd3172b23 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -91,4 +91,16 @@ compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; }; + + twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charging indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; }; diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e2fe3195c0d1..dde75ae8b4b1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -121,6 +121,18 @@ interrupts = <0>; }; + timer@101e2000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x101e2000 0x1000>; + interrupts = <4>; + }; + + timer@101e3000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x101e3000 0x1000>; + interrupts = <5>; + }; + gpio0: gpio@101e4000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x101e4000 0x1000>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 1420bb14d95c..62d9b225dcce 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -98,6 +98,7 @@ <0 49 4>; clocks = <&oscclk2>, <&oscclk2>; clock-names = "timclk", "apb_pclk"; + status = "disabled"; }; watchdog@100e5000 { diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts index ec3f9528e180..336915151398 100644 --- a/arch/arm/boot/dts/xenvm-4.2.dts +++ b/arch/arm/boot/dts/xenvm-4.2.dts @@ -29,6 +29,19 @@ compatible = "arm,cortex-a15"; reg = <0>; }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "hvc"; + cpu_off = <1>; + cpu_on = <2>; }; memory@80000000 { diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 748fc347ed18..14fb2e609bab 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -136,5 +136,12 @@ clock-names = "cpu_1x"; clock-ranges; }; + scutimer: scutimer@f8f00600 { + interrupt-parent = <&intc>; + interrupts = < 1 13 0x301 >; + compatible = "arm,cortex-a9-twd-timer"; + reg = < 0xf8f00600 0x20 >; + clocks = <&cpu_clk 1>; + } ; }; }; diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 52b88d81b7bb..3caed0db6986 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -15,8 +15,6 @@ #include #include -#include - #include #include #include @@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i static void __cpuinit mcpm_secondary_init(unsigned int cpu) { mcpm_cpu_powered_up(); - gic_secondary_init(0); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 9d2d3ba339ff..ddc740769601 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -25,33 +25,29 @@ #include #include #include +#include +#include +#include #include #include +#include -static long __init sp804_get_clock_rate(const char *name) +static long __init sp804_get_clock_rate(struct clk *clk) { - struct clk *clk; long rate; int err; - clk = clk_get_sys("sp804", name); - if (IS_ERR(clk)) { - pr_err("sp804: %s clock not found: %d\n", name, - (int)PTR_ERR(clk)); - return PTR_ERR(clk); - } - err = clk_prepare(clk); if (err) { - pr_err("sp804: %s clock failed to prepare: %d\n", name, err); + pr_err("sp804: clock failed to prepare: %d\n", err); clk_put(clk); return err; } err = clk_enable(clk); if (err) { - pr_err("sp804: %s clock failed to enable: %d\n", name, err); + pr_err("sp804: clock failed to enable: %d\n", err); clk_unprepare(clk); clk_put(clk); return err; @@ -59,7 +55,7 @@ static long __init sp804_get_clock_rate(const char *name) rate = clk_get_rate(clk); if (rate < 0) { - pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate); + pr_err("sp804: clock failed to get rate: %ld\n", rate); clk_disable(clk); clk_unprepare(clk); clk_put(clk); @@ -77,9 +73,21 @@ static u32 sp804_read(void) void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name, + struct clk *clk, int use_sched_clock) { - long rate = sp804_get_clock_rate(name); + long rate; + + if (!clk) { + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: clock not found: %d\n", + (int)PTR_ERR(clk)); + return; + } + } + + rate = sp804_get_clock_rate(clk); if (rate < 0) return; @@ -171,12 +179,20 @@ static struct irqaction sp804_timer_irq = { .dev_id = &sp804_clockevent, }; -void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, - const char *name) +void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name) { struct clock_event_device *evt = &sp804_clockevent; - long rate = sp804_get_clock_rate(name); + long rate; + if (!clk) + clk = clk_get_sys("sp804", name); + if (IS_ERR(clk)) { + pr_err("sp804: %s clock not found: %d\n", name, + (int)PTR_ERR(clk)); + return; + } + + rate = sp804_get_clock_rate(clk); if (rate < 0) return; @@ -186,6 +202,98 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, evt->irq = irq; evt->cpumask = cpu_possible_mask; + writel(0, base + TIMER_CTRL); + setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); } + +static void __init sp804_of_init(struct device_node *np) +{ + static bool initialized = false; + void __iomem *base; + int irq; + u32 irq_num = 0; + struct clk *clk1, *clk2; + const char *name = of_get_property(np, "compatible", NULL); + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Ensure timers are disabled */ + writel(0, base + TIMER_CTRL); + writel(0, base + TIMER_2_BASE + TIMER_CTRL); + + if (initialized || !of_device_is_available(np)) + goto err; + + clk1 = of_clk_get(np, 0); + if (IS_ERR(clk1)) + clk1 = NULL; + + /* Get the 2nd clock if the timer has 2 timer clocks */ + if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { + clk2 = of_clk_get(np, 1); + if (IS_ERR(clk2)) { + pr_err("sp804: %s clock not found: %d\n", np->name, + (int)PTR_ERR(clk2)); + goto err; + } + } else + clk2 = clk1; + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + goto err; + + of_property_read_u32(np, "arm,sp804-has-irq", &irq_num); + if (irq_num == 2) { + __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name); + __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1); + } else { + __sp804_clockevents_init(base, irq, clk1 , name); + __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE, + name, clk2, 1); + } + initialized = true; + + return; +err: + iounmap(base); +} +CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init); + +static void __init integrator_cp_of_init(struct device_node *np) +{ + static int init_count = 0; + void __iomem *base; + int irq; + const char *name = of_get_property(np, "compatible", NULL); + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Ensure timer is disabled */ + writel(0, base + TIMER_CTRL); + + if (init_count == 2 || !of_device_is_available(np)) + goto err; + + if (!init_count) + sp804_clocksource_init(base, name); + else { + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + goto err; + + sp804_clockevents_init(base, irq, name); + } + + init_count++; + return; +err: + iounmap(base); +} +CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init); diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig new file mode 100644 index 000000000000..6524cdf3b08d --- /dev/null +++ b/arch/arm/configs/bockw_defconfig @@ -0,0 +1,94 @@ +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_KERNEL_LZMA=y +CONFIG_NO_HZ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_R8A7778=y +CONFIG_MACH_BOCKW=y +CONFIG_MEMORY_START=0x60000000 +CONFIG_MEMORY_SIZE=0x10000000 +CONFIG_SHMOBILE_TIMER_HZ=1024 +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_458693=y +CONFIG_ARM_ERRATA_460075=y +CONFIG_ARM_ERRATA_743622=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp" +CONFIG_CMDLINE_FORCE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_NFS_V4_1=y +CONFIG_ROOT_NFS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +# CONFIG_ARM_UNWIND is not set +CONFIG_AVERAGE=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435d204e..227abf9cc601 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 02c657af4005..f07a847b00c9 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -109,6 +109,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y +CONFIG_GPIO_SYSFS=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 088d6c11a0fa..6ec010f248b5 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -9,6 +9,7 @@ CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_MODULES=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 7e0ebb64a7f9..9940f7b4e438 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -199,7 +199,6 @@ CONFIG_USB_PHY=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 33903ca0d879..abbe31937c65 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_MULTI_V6=y CONFIG_ARCH_OMAP2PLUS=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y @@ -137,6 +138,8 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y @@ -153,6 +156,7 @@ CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -195,12 +199,12 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index a5f0485133cf..f7ba316164d4 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_DRM=y +CONFIG_TEGRA_HOST1X=y CONFIG_DRM_TEGRA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set @@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y -CONFIG_SENSORS_AK8975=y +CONFIG_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S index 92c6eed7aac9..99207c45ec10 100644 --- a/arch/arm/crypto/sha1-armv4-large.S +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) cmp r14,sp bne .L_00_15 @ [((11+4)*5+2)*3] + sub sp,sp,#25*4 #if __ARM_ARCH__<7 ldrb r10,[r1,#2] ldrb r9,[r1,#3] @@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order) add r3,r3,r10 @ E+=F_00_19(B,C,D) ldr r8,.LK_20_39 @ [+15+16*4] - sub sp,sp,#25*4 cmn sp,#0 @ [+3], clear carry to denote 20_39 .L_20_39_or_60_79: ldr r9,[r14,#15*4] diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 7ade91d8cc6f..7c1bfc0aea0c 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -10,8 +10,7 @@ #include #ifdef CONFIG_ARM_ARCH_TIMER -int arch_timer_of_register(void); -int arch_timer_sched_clock_init(void); +int arch_timer_arch_init(void); /* * These register accessors are marked inline so the compiler can @@ -110,16 +109,6 @@ static inline void __cpuinit arch_counter_set_user_access(void) asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); } -#else -static inline int arch_timer_of_register(void) -{ - return -ENXIO; -} - -static inline int arch_timer_sched_clock_init(void) -{ - return -ENXIO; -} #endif #endif diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 7eb18c1d8d6c..4f009c10540d 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, ((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \ atomic64_t, \ counter), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #define cmpxchg64_local(ptr, o, n) \ ((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \ local64_t, \ a), \ - (unsigned long)(o), \ - (unsigned long)(n))) + (unsigned long long)(o), \ + (unsigned long long)(n))) #endif /* __LINUX_ARM_ARCH__ >= 6 */ diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h index 2dd9d3f83f29..bb28af7c32de 100644 --- a/arch/arm/include/asm/hardware/timer-sp.h +++ b/arch/arm/include/asm/hardware/timer-sp.h @@ -1,15 +1,23 @@ +struct clk; + void __sp804_clocksource_and_sched_clock_init(void __iomem *, - const char *, int); + const char *, struct clk *, int); +void __sp804_clockevents_init(void __iomem *, unsigned int, + struct clk *, const char *); static inline void sp804_clocksource_init(void __iomem *base, const char *name) { - __sp804_clocksource_and_sched_clock_init(base, name, 0); + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0); } static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name) { - __sp804_clocksource_and_sched_clock_init(base, name, 1); + __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1); } -void sp804_clockevents_init(void __iomem *, unsigned int, const char *); +static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name) +{ + __sp804_clockevents_init(base, irq, NULL, name); + +} diff --git a/arch/arm/include/asm/idmap.h b/arch/arm/include/asm/idmap.h index 1a66f907e5cc..bf863edb517d 100644 --- a/arch/arm/include/asm/idmap.h +++ b/arch/arm/include/asm/idmap.h @@ -8,7 +8,6 @@ #define __idmap __section(.idmap.text) noinline notrace extern pgd_t *idmap_pgd; -extern pgd_t *hyp_pgd; void setup_mm_for_reboot(void); diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 0c4e643d939e..57cb786a6203 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -87,7 +87,7 @@ struct kvm_vcpu_fault_info { u32 hyp_pc; /* PC when exception was taken from Hyp mode */ }; -typedef struct vfp_hard_struct kvm_kernel_vfp_t; +typedef struct vfp_hard_struct kvm_cpu_context_t; struct kvm_vcpu_arch { struct kvm_regs regs; @@ -105,8 +105,10 @@ struct kvm_vcpu_arch { struct kvm_vcpu_fault_info fault; /* Floating point registers (VFP and Advanced SIMD/NEON) */ - kvm_kernel_vfp_t vfp_guest; - kvm_kernel_vfp_t *vfp_host; + struct vfp_hard_struct vfp_guest; + + /* Host FP context */ + kvm_cpu_context_t *host_cpu_context; /* VGIC state */ struct vgic_cpu vgic_cpu; @@ -188,23 +190,38 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, int exception_index); -static inline void __cpu_init_hyp_mode(unsigned long long pgd_ptr, +static inline void __cpu_init_hyp_mode(unsigned long long boot_pgd_ptr, + unsigned long long pgd_ptr, unsigned long hyp_stack_ptr, unsigned long vector_ptr) { - unsigned long pgd_low, pgd_high; - - pgd_low = (pgd_ptr & ((1ULL << 32) - 1)); - pgd_high = (pgd_ptr >> 32ULL); - /* - * Call initialization code, and switch to the full blown - * HYP code. The init code doesn't need to preserve these registers as - * r1-r3 and r12 are already callee save according to the AAPCS. - * Note that we slightly misuse the prototype by casing the pgd_low to - * a void *. + * Call initialization code, and switch to the full blown HYP + * code. The init code doesn't need to preserve these + * registers as r0-r3 are already callee saved according to + * the AAPCS. + * Note that we slightly misuse the prototype by casing the + * stack pointer to a void *. + * + * We don't have enough registers to perform the full init in + * one go. Install the boot PGD first, and then install the + * runtime PGD, stack pointer and vectors. The PGDs are always + * passed as the third argument, in order to be passed into + * r2-r3 to the init code (yes, this is compliant with the + * PCS!). */ - kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr); + + kvm_call_hyp(NULL, 0, boot_pgd_ptr); + + kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); } +static inline int kvm_arch_dev_ioctl_check_extension(long ext) +{ + return 0; +} + +int kvm_perf_init(void); +int kvm_perf_teardown(void); + #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 970f3b5fa109..472ac7091003 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -19,21 +19,33 @@ #ifndef __ARM_KVM_MMU_H__ #define __ARM_KVM_MMU_H__ -#include -#include -#include +#include +#include /* * We directly use the kernel VA for the HYP, as we can directly share * the mapping (HTTBR "covers" TTBR1). */ -#define HYP_PAGE_OFFSET_MASK (~0UL) +#define HYP_PAGE_OFFSET_MASK UL(~0) #define HYP_PAGE_OFFSET PAGE_OFFSET #define KERN_TO_HYP(kva) (kva) +/* + * Our virtual mapping for the boot-time MMU-enable code. Must be + * shared across all the page-tables. Conveniently, we use the vectors + * page, where no kernel data will ever be shared with HYP. + */ +#define TRAMPOLINE_VA UL(CONFIG_VECTORS_BASE) + +#ifndef __ASSEMBLY__ + +#include +#include + int create_hyp_mappings(void *from, void *to); int create_hyp_io_mappings(void *from, void *to, phys_addr_t); -void free_hyp_pmds(void); +void free_boot_hyp_pgd(void); +void free_hyp_pgds(void); int kvm_alloc_stage2_pgd(struct kvm *kvm); void kvm_free_stage2_pgd(struct kvm *kvm); @@ -45,6 +57,8 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu); phys_addr_t kvm_mmu_get_httbr(void); +phys_addr_t kvm_mmu_get_boot_httbr(void); +phys_addr_t kvm_get_idmap_vector(void); int kvm_mmu_init(void); void kvm_clear_hyp_idmap(void); @@ -114,4 +128,8 @@ static inline void coherent_icache_guest_page(struct kvm *kvm, gfn_t gfn) } } +#define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l)) + +#endif /* !__ASSEMBLY__ */ + #endif /* __ARM_KVM_MMU_H__ */ diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f757263438..3d520ddca61b 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -11,4 +11,6 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern unsigned long long (*sched_clock_func)(void); + #endif diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 8a823253d775..799f42ecca63 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -46,6 +46,7 @@ int HYPERVISOR_event_channel_op(int cmd, void *arg); unsigned long HYPERVISOR_hvm_op(int op, void *arg); int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); +int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, diff --git a/arch/arm/include/debug/mvebu.S b/arch/arm/include/debug/mvebu.S index 865c6d02b332..df191afa3be1 100644 --- a/arch/arm/include/debug/mvebu.S +++ b/arch/arm/include/debug/mvebu.S @@ -12,7 +12,7 @@ */ #define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 -#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000 +#define ARMADA_370_XP_REGS_VIRT_BASE 0xfec00000 .macro addruart, rp, rv, tmp ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S index 2848857f5b62..fbd24beeb1fa 100644 --- a/arch/arm/include/debug/ux500.S +++ b/arch/arm/include/debug/ux500.S @@ -24,9 +24,9 @@ #define U8500_UART0_PHYS_BASE (0x80120000) #define U8500_UART1_PHYS_BASE (0x80121000) #define U8500_UART2_PHYS_BASE (0x80007000) -#define U8500_UART0_VIRT_BASE (0xa8120000) -#define U8500_UART1_VIRT_BASE (0xa8121000) -#define U8500_UART2_VIRT_BASE (0xa8007000) +#define U8500_UART0_VIRT_BASE (0xf8120000) +#define U8500_UART1_VIRT_BASE (0xf8121000) +#define U8500_UART2_VIRT_BASE (0xf8007000) #define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE #define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE #endif diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index d957a51435d8..59dcdced6e30 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -22,9 +22,11 @@ static unsigned long arch_timer_read_counter_long(void) return arch_timer_read_counter(); } -static u32 arch_timer_read_counter_u32(void) +static u32 sched_clock_mult __read_mostly; + +static unsigned long long notrace arch_timer_sched_clock(void) { - return arch_timer_read_counter(); + return arch_timer_read_counter() * sched_clock_mult; } static struct delay_timer arch_delay_timer; @@ -37,25 +39,20 @@ static void __init arch_timer_delay_timer_register(void) register_current_timer_delay(&arch_delay_timer); } -int __init arch_timer_of_register(void) +int __init arch_timer_arch_init(void) { - int ret; + u32 arch_timer_rate = arch_timer_get_rate(); - ret = arch_timer_init(); - if (ret) - return ret; + if (arch_timer_rate == 0) + return -ENXIO; arch_timer_delay_timer_register(); - return 0; -} - -int __init arch_timer_sched_clock_init(void) -{ - if (arch_timer_get_rate() == 0) - return -ENXIO; - - setup_sched_clock(arch_timer_read_counter_u32, - 32, arch_timer_get_rate()); + /* Cache the sched_clock multiplier to save a divide in the hot path. */ + sched_clock_mult = NSEC_PER_SEC / arch_timer_rate; + sched_clock_func = arch_timer_sched_clock; + pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n", + arch_timer_rate / 1000, sched_clock_mult); + return 0; } diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index a53efa993690..ee68cce6b48e 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -158,7 +158,7 @@ int main(void) DEFINE(VCPU_MIDR, offsetof(struct kvm_vcpu, arch.midr)); DEFINE(VCPU_CP15, offsetof(struct kvm_vcpu, arch.cp15)); DEFINE(VCPU_VFP_GUEST, offsetof(struct kvm_vcpu, arch.vfp_guest)); - DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.vfp_host)); + DEFINE(VCPU_VFP_HOST, offsetof(struct kvm_vcpu, arch.host_cpu_context)); DEFINE(VCPU_REGS, offsetof(struct kvm_vcpu, arch.regs)); DEFINE(VCPU_USR_REGS, offsetof(struct kvm_vcpu, arch.regs.usr_regs)); DEFINE(VCPU_SVC_REGS, offsetof(struct kvm_vcpu, arch.regs.svc_regs)); diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 70f1bdeb241b..5af04f6daa33 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -180,6 +180,13 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; +#ifdef CONFIG_ARCH_MULTIPLATFORM + DT_MACHINE_START(GENERIC_DT, "Generic DT based system") + MACHINE_END + + mdesc_best = (struct machine_desc *)&__mach_desc_GENERIC_DT; +#endif + if (!dt_phys) return NULL; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index f21970316836..282de4826abb 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -411,7 +411,6 @@ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, .vm_end = 0xffff0000 + PAGE_SIZE, .vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC, - .vm_mm = &init_mm, }; static int __init gate_vma_init(void) diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 59d2adb764a9..e8edcaa0e432 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -20,6 +20,7 @@ struct clock_data { u64 epoch_ns; u32 epoch_cyc; u32 epoch_cyc_copy; + unsigned long rate; u32 mult; u32 shift; bool suspended; @@ -113,11 +114,14 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) u64 res, wrap; char r_unit; + if (cd.rate > rate) + return; + BUG_ON(bits > 32); WARN_ON(!irqs_disabled()); - WARN_ON(read_sched_clock != jiffy_sched_clock_read); read_sched_clock = read; sched_clock_mask = (1 << bits) - 1; + cd.rate = rate; /* calculate the mult/shift to convert counter ticks to ns. */ clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0); @@ -161,12 +165,19 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) pr_debug("Registered %pF as sched_clock source\n", read); } -unsigned long long notrace sched_clock(void) +static unsigned long long notrace sched_clock_32(void) { u32 cyc = read_sched_clock(); return cyc_to_sched_clock(cyc, sched_clock_mask); } +unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32; + +unsigned long long notrace sched_clock(void) +{ + return sched_clock_func(); +} + void __init sched_clock_postinit(void) { /* diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 728007c4a2b7..1522c7ae31b0 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -659,9 +660,19 @@ struct screen_info screen_info = { static int __init customize_machine(void) { - /* customizes platform devices, or adds new ones */ + /* + * customizes platform devices, or adds new ones + * On DT based machines, we fall back to populating the + * machine from the device tree, if no callback is provided, + * otherwise we would always need an init_machine callback. + */ if (machine_desc->init_machine) machine_desc->init_machine(); +#ifdef CONFIG_OF + else + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +#endif return 0; } arch_initcall(customize_machine); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 47ab90563bf4..550d63cef68e 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -251,7 +251,7 @@ void __ref cpu_die(void) * this returns, power and/or clocks can be removed at any point * from this CPU and its cache by platform_cpu_kill(). */ - RCU_NONIDLE(complete(&cpu_died)); + complete(&cpu_died); /* * Ensure that the cache lines associated with that completion are diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 955d92d265e5..abff4e9aaee0 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -115,6 +116,10 @@ int __init register_persistent_clock(clock_access_fn read_boot, void __init time_init(void) { - machine_desc->init_time(); + if (machine_desc->init_time) + machine_desc->init_time(); + else + clocksource_of_init(); + sched_clock_postinit(); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b571484e9f03..a871b8e00fca 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -20,7 +20,7 @@ VMLINUX_SYMBOL(__idmap_text_start) = .; \ *(.idmap.text) \ VMLINUX_SYMBOL(__idmap_text_end) = .; \ - ALIGN_FUNCTION(); \ + . = ALIGN(32); \ VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \ *(.hyp.idmap.text) \ VMLINUX_SYMBOL(__hyp_idmap_text_end) = .; @@ -315,3 +315,8 @@ SECTIONS */ ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") +/* + * The HYP init code can't be more than a page long. + * The above comment applies as well. + */ +ASSERT(((__hyp_idmap_text_end - __hyp_idmap_text_start) <= PAGE_SIZE), "HYP init code too big") diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 49dd64e579c2..370e1a8af6ac 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -41,9 +41,9 @@ config KVM_ARM_HOST Provides host support for ARM processors. config KVM_ARM_MAX_VCPUS - int "Number maximum supported virtual CPUs per VM" - depends on KVM_ARM_HOST - default 4 + int "Number maximum supported virtual CPUs per VM" if KVM_ARM_HOST + default 4 if KVM_ARM_HOST + default 0 help Static number of max supported virtual CPUs per VM. diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 8dc5e76cb789..53c5ed83d16f 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -18,6 +18,6 @@ kvm-arm-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o) obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o -obj-y += coproc.o coproc_a15.o mmio.o psci.o +obj-y += coproc.o coproc_a15.o mmio.o psci.o perf.o obj-$(CONFIG_KVM_ARM_VGIC) += vgic.o obj-$(CONFIG_KVM_ARM_TIMER) += arch_timer.o diff --git a/arch/arm/kvm/arch_timer.c b/arch/arm/kvm/arch_timer.c index 6ac938d46297..c55b6089e923 100644 --- a/arch/arm/kvm/arch_timer.c +++ b/arch/arm/kvm/arch_timer.c @@ -22,6 +22,7 @@ #include #include +#include #include #include @@ -64,7 +65,7 @@ static void kvm_timer_inject_irq(struct kvm_vcpu *vcpu) { struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; - timer->cntv_ctl |= 1 << 1; /* Mask the interrupt in the guest */ + timer->cntv_ctl |= ARCH_TIMER_CTRL_IT_MASK; kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id, vcpu->arch.timer_cpu.irq->irq, vcpu->arch.timer_cpu.irq->level); @@ -133,8 +134,8 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) cycle_t cval, now; u64 ns; - /* Check if the timer is enabled and unmasked first */ - if ((timer->cntv_ctl & 3) != 1) + if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) || + !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE)) return; cval = timer->cntv_cval; diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index a0dfc2a53f91..37d216d814cd 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -16,6 +16,7 @@ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ +#include #include #include #include @@ -48,7 +49,7 @@ __asm__(".arch_extension virt"); #endif static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page); -static kvm_kernel_vfp_t __percpu *kvm_host_vfp_state; +static kvm_cpu_context_t __percpu *kvm_host_cpu_state; static unsigned long hyp_default_vectors; /* Per-CPU variable containing the currently running vcpu. */ @@ -206,7 +207,7 @@ int kvm_dev_ioctl_check_extension(long ext) r = KVM_MAX_VCPUS; break; default: - r = 0; + r = kvm_arch_dev_ioctl_check_extension(ext); break; } return r; @@ -218,27 +219,18 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } -int kvm_arch_set_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem, - struct kvm_memory_slot old, - int user_alloc) -{ - return 0; -} - int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, - struct kvm_memory_slot old, struct kvm_userspace_memory_region *mem, - bool user_alloc) + enum kvm_mr_change change) { return 0; } void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_userspace_memory_region *mem, - struct kvm_memory_slot old, - bool user_alloc) + const struct kvm_memory_slot *old, + enum kvm_mr_change change) { } @@ -326,7 +318,7 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { vcpu->cpu = cpu; - vcpu->arch.vfp_host = this_cpu_ptr(kvm_host_vfp_state); + vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state); /* * Check whether this vcpu requires the cache to be flushed on @@ -639,7 +631,8 @@ static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level) return 0; } -int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level) +int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, + bool line_status) { u32 irq = irq_level->irq; unsigned int irq_type, vcpu_idx, irq_num; @@ -794,30 +787,48 @@ long kvm_arch_vm_ioctl(struct file *filp, } } -static void cpu_init_hyp_mode(void *vector) +static void cpu_init_hyp_mode(void *dummy) { + unsigned long long boot_pgd_ptr; unsigned long long pgd_ptr; unsigned long hyp_stack_ptr; unsigned long stack_page; unsigned long vector_ptr; /* Switch from the HYP stub to our own HYP init vector */ - __hyp_set_vectors((unsigned long)vector); + __hyp_set_vectors(kvm_get_idmap_vector()); + boot_pgd_ptr = (unsigned long long)kvm_mmu_get_boot_httbr(); pgd_ptr = (unsigned long long)kvm_mmu_get_httbr(); stack_page = __get_cpu_var(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; vector_ptr = (unsigned long)__kvm_hyp_vector; - __cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr); + __cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr); } +static int hyp_init_cpu_notify(struct notifier_block *self, + unsigned long action, void *cpu) +{ + switch (action) { + case CPU_STARTING: + case CPU_STARTING_FROZEN: + cpu_init_hyp_mode(NULL); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block hyp_init_cpu_nb = { + .notifier_call = hyp_init_cpu_notify, +}; + /** * Inits Hyp-mode on all online CPUs */ static int init_hyp_mode(void) { - phys_addr_t init_phys_addr; int cpu; int err = 0; @@ -849,24 +860,6 @@ static int init_hyp_mode(void) per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page; } - /* - * Execute the init code on each CPU. - * - * Note: The stack is not mapped yet, so don't do anything else than - * initializing the hypervisor mode on each CPU using a local stack - * space for temporary storage. - */ - init_phys_addr = virt_to_phys(__kvm_hyp_init); - for_each_online_cpu(cpu) { - smp_call_function_single(cpu, cpu_init_hyp_mode, - (void *)(long)init_phys_addr, 1); - } - - /* - * Unmap the identity mapping - */ - kvm_clear_hyp_idmap(); - /* * Map the Hyp-code called directly from the host */ @@ -890,33 +883,38 @@ static int init_hyp_mode(void) } /* - * Map the host VFP structures + * Map the host CPU structures */ - kvm_host_vfp_state = alloc_percpu(kvm_kernel_vfp_t); - if (!kvm_host_vfp_state) { + kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t); + if (!kvm_host_cpu_state) { err = -ENOMEM; - kvm_err("Cannot allocate host VFP state\n"); + kvm_err("Cannot allocate host CPU state\n"); goto out_free_mappings; } for_each_possible_cpu(cpu) { - kvm_kernel_vfp_t *vfp; + kvm_cpu_context_t *cpu_ctxt; - vfp = per_cpu_ptr(kvm_host_vfp_state, cpu); - err = create_hyp_mappings(vfp, vfp + 1); + cpu_ctxt = per_cpu_ptr(kvm_host_cpu_state, cpu); + err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1); if (err) { - kvm_err("Cannot map host VFP state: %d\n", err); - goto out_free_vfp; + kvm_err("Cannot map host CPU state: %d\n", err); + goto out_free_context; } } + /* + * Execute the init code on each CPU. + */ + on_each_cpu(cpu_init_hyp_mode, NULL, 1); + /* * Init HYP view of VGIC */ err = kvm_vgic_hyp_init(); if (err) - goto out_free_vfp; + goto out_free_context; #ifdef CONFIG_KVM_ARM_VGIC vgic_present = true; @@ -929,12 +927,19 @@ static int init_hyp_mode(void) if (err) goto out_free_mappings; +#ifndef CONFIG_HOTPLUG_CPU + free_boot_hyp_pgd(); +#endif + + kvm_perf_init(); + kvm_info("Hyp mode initialized successfully\n"); + return 0; -out_free_vfp: - free_percpu(kvm_host_vfp_state); +out_free_context: + free_percpu(kvm_host_cpu_state); out_free_mappings: - free_hyp_pmds(); + free_hyp_pgds(); out_free_stack_pages: for_each_possible_cpu(cpu) free_page(per_cpu(kvm_arm_hyp_stack_page, cpu)); @@ -943,27 +948,42 @@ out_err: return err; } +static void check_kvm_target_cpu(void *ret) +{ + *(int *)ret = kvm_target_cpu(); +} + /** * Initialize Hyp-mode and memory mappings on all CPUs. */ int kvm_arch_init(void *opaque) { int err; + int ret, cpu; if (!is_hyp_mode_available()) { kvm_err("HYP mode not available\n"); return -ENODEV; } - if (kvm_target_cpu() < 0) { - kvm_err("Target CPU not supported!\n"); - return -ENODEV; + for_each_online_cpu(cpu) { + smp_call_function_single(cpu, check_kvm_target_cpu, &ret, 1); + if (ret < 0) { + kvm_err("Error, CPU %d not supported!\n", cpu); + return -ENODEV; + } } err = init_hyp_mode(); if (err) goto out_err; + err = register_cpu_notifier(&hyp_init_cpu_nb); + if (err) { + kvm_err("Cannot register HYP init CPU notifier (%d)\n", err); + goto out_err; + } + kvm_coproc_table_init(); return 0; out_err: @@ -973,6 +993,7 @@ out_err: /* NOP: Compiling as a module not supported */ void kvm_arch_exit(void) { + kvm_perf_teardown(); } static int arm_init(void) diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 9f37a79b880b..f048338135f7 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -21,13 +21,33 @@ #include #include #include +#include /******************************************************************** * Hypervisor initialization * - should be called with: - * r0,r1 = Hypervisor pgd pointer - * r2 = top of Hyp stack (kernel VA) - * r3 = pointer to hyp vectors + * r0 = top of Hyp stack (kernel VA) + * r1 = pointer to hyp vectors + * r2,r3 = Hypervisor pgd pointer + * + * The init scenario is: + * - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, + * runtime stack, runtime vectors + * - Enable the MMU with the boot pgd + * - Jump to a target into the trampoline page (remember, this is the same + * physical page!) + * - Now switch to the runtime pgd (same VA, and still the same physical + * page!) + * - Invalidate TLBs + * - Set stack and vectors + * - Profit! (or eret, if you only care about the code). + * + * As we only have four registers available to pass parameters (and we + * need six), we split the init in two phases: + * - Phase 1: r0 = 0, r1 = 0, r2,r3 contain the boot PGD. + * Provides the basic HYP init, and enable the MMU. + * - Phase 2: r0 = ToS, r1 = vectors, r2,r3 contain the runtime PGD. + * Switches to the runtime PGD, set stack and vectors. */ .text @@ -47,22 +67,25 @@ __kvm_hyp_init: W(b) . __do_hyp_init: + cmp r0, #0 @ We have a SP? + bne phase2 @ Yes, second stage init + @ Set the HTTBR to point to the hypervisor PGD pointer passed - mcrr p15, 4, r0, r1, c2 + mcrr p15, 4, r2, r3, c2 @ Set the HTCR and VTCR to the same shareability and cacheability @ settings as the non-secure TTBCR and with T0SZ == 0. mrc p15, 4, r0, c2, c0, 2 @ HTCR - ldr r12, =HTCR_MASK - bic r0, r0, r12 + ldr r2, =HTCR_MASK + bic r0, r0, r2 mrc p15, 0, r1, c2, c0, 2 @ TTBCR and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ) orr r0, r0, r1 mcr p15, 4, r0, c2, c0, 2 @ HTCR mrc p15, 4, r1, c2, c1, 2 @ VTCR - ldr r12, =VTCR_MASK - bic r1, r1, r12 + ldr r2, =VTCR_MASK + bic r1, r1, r2 bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits orr r1, r0, r1 orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S) @@ -85,24 +108,41 @@ __do_hyp_init: @ - Memory alignment checks: enabled @ - MMU: enabled (this code must be run from an identity mapping) mrc p15, 4, r0, c1, c0, 0 @ HSCR - ldr r12, =HSCTLR_MASK - bic r0, r0, r12 + ldr r2, =HSCTLR_MASK + bic r0, r0, r2 mrc p15, 0, r1, c1, c0, 0 @ SCTLR - ldr r12, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) - and r1, r1, r12 - ARM( ldr r12, =(HSCTLR_M | HSCTLR_A) ) - THUMB( ldr r12, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) - orr r1, r1, r12 + ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C) + and r1, r1, r2 + ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) ) + THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) + orr r1, r1, r2 orr r0, r0, r1 isb mcr p15, 4, r0, c1, c0, 0 @ HSCR - isb - @ Set stack pointer and return to the kernel - mov sp, r2 + @ End of init phase-1 + eret + +phase2: + @ Set stack pointer + mov sp, r0 @ Set HVBAR to point to the HYP vectors - mcr p15, 4, r3, c12, c0, 0 @ HVBAR + mcr p15, 4, r1, c12, c0, 0 @ HVBAR + + @ Jump to the trampoline page + ldr r0, =TRAMPOLINE_VA + adr r1, target + bfi r0, r1, #0, #PAGE_SHIFT + mov pc, r0 + +target: @ We're now in the trampoline code, switch page tables + mcrr p15, 4, r2, r3, c2 + isb + + @ Invalidate the old TLBs + mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH + dsb eret diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 2f12e4056408..965706578f13 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -32,8 +32,15 @@ extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; +static pgd_t *boot_hyp_pgd; +static pgd_t *hyp_pgd; static DEFINE_MUTEX(kvm_hyp_pgd_mutex); +static void *init_bounce_page; +static unsigned long hyp_idmap_start; +static unsigned long hyp_idmap_end; +static phys_addr_t hyp_idmap_vector; + static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); @@ -71,242 +78,6 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void free_ptes(pmd_t *pmd, unsigned long addr) -{ - pte_t *pte; - unsigned int i; - - for (i = 0; i < PTRS_PER_PMD; i++, addr += PMD_SIZE) { - if (!pmd_none(*pmd) && pmd_table(*pmd)) { - pte = pte_offset_kernel(pmd, addr); - pte_free_kernel(NULL, pte); - } - pmd++; - } -} - -static void free_hyp_pgd_entry(unsigned long addr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - unsigned long hyp_addr = KERN_TO_HYP(addr); - - pgd = hyp_pgd + pgd_index(hyp_addr); - pud = pud_offset(pgd, hyp_addr); - - if (pud_none(*pud)) - return; - BUG_ON(pud_bad(*pud)); - - pmd = pmd_offset(pud, hyp_addr); - free_ptes(pmd, addr); - pmd_free(NULL, pmd); - pud_clear(pud); -} - -/** - * free_hyp_pmds - free a Hyp-mode level-2 tables and child level-3 tables - * - * Assumes this is a page table used strictly in Hyp-mode and therefore contains - * either mappings in the kernel memory area (above PAGE_OFFSET), or - * device mappings in the vmalloc range (from VMALLOC_START to VMALLOC_END). - */ -void free_hyp_pmds(void) -{ - unsigned long addr; - - mutex_lock(&kvm_hyp_pgd_mutex); - for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - free_hyp_pgd_entry(addr); - for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - free_hyp_pgd_entry(addr); - mutex_unlock(&kvm_hyp_pgd_mutex); -} - -static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start, - unsigned long end) -{ - pte_t *pte; - unsigned long addr; - struct page *page; - - for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { - unsigned long hyp_addr = KERN_TO_HYP(addr); - - pte = pte_offset_kernel(pmd, hyp_addr); - BUG_ON(!virt_addr_valid(addr)); - page = virt_to_page(addr); - kvm_set_pte(pte, mk_pte(page, PAGE_HYP)); - } -} - -static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start, - unsigned long end, - unsigned long *pfn_base) -{ - pte_t *pte; - unsigned long addr; - - for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) { - unsigned long hyp_addr = KERN_TO_HYP(addr); - - pte = pte_offset_kernel(pmd, hyp_addr); - BUG_ON(pfn_valid(*pfn_base)); - kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE)); - (*pfn_base)++; - } -} - -static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start, - unsigned long end, unsigned long *pfn_base) -{ - pmd_t *pmd; - pte_t *pte; - unsigned long addr, next; - - for (addr = start; addr < end; addr = next) { - unsigned long hyp_addr = KERN_TO_HYP(addr); - pmd = pmd_offset(pud, hyp_addr); - - BUG_ON(pmd_sect(*pmd)); - - if (pmd_none(*pmd)) { - pte = pte_alloc_one_kernel(NULL, hyp_addr); - if (!pte) { - kvm_err("Cannot allocate Hyp pte\n"); - return -ENOMEM; - } - pmd_populate_kernel(NULL, pmd, pte); - } - - next = pmd_addr_end(addr, end); - - /* - * If pfn_base is NULL, we map kernel pages into HYP with the - * virtual address. Otherwise, this is considered an I/O - * mapping and we map the physical region starting at - * *pfn_base to [start, end[. - */ - if (!pfn_base) - create_hyp_pte_mappings(pmd, addr, next); - else - create_hyp_io_pte_mappings(pmd, addr, next, pfn_base); - } - - return 0; -} - -static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base) -{ - unsigned long start = (unsigned long)from; - unsigned long end = (unsigned long)to; - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - unsigned long addr, next; - int err = 0; - - if (start >= end) - return -EINVAL; - /* Check for a valid kernel memory mapping */ - if (!pfn_base && (!virt_addr_valid(from) || !virt_addr_valid(to - 1))) - return -EINVAL; - /* Check for a valid kernel IO mapping */ - if (pfn_base && (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))) - return -EINVAL; - - mutex_lock(&kvm_hyp_pgd_mutex); - for (addr = start; addr < end; addr = next) { - unsigned long hyp_addr = KERN_TO_HYP(addr); - pgd = hyp_pgd + pgd_index(hyp_addr); - pud = pud_offset(pgd, hyp_addr); - - if (pud_none_or_clear_bad(pud)) { - pmd = pmd_alloc_one(NULL, hyp_addr); - if (!pmd) { - kvm_err("Cannot allocate Hyp pmd\n"); - err = -ENOMEM; - goto out; - } - pud_populate(NULL, pud, pmd); - } - - next = pgd_addr_end(addr, end); - err = create_hyp_pmd_mappings(pud, addr, next, pfn_base); - if (err) - goto out; - } -out: - mutex_unlock(&kvm_hyp_pgd_mutex); - return err; -} - -/** - * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode - * @from: The virtual kernel start address of the range - * @to: The virtual kernel end address of the range (exclusive) - * - * The same virtual address as the kernel virtual address is also used - * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying - * physical pages. - * - * Note: Wrapping around zero in the "to" address is not supported. - */ -int create_hyp_mappings(void *from, void *to) -{ - return __create_hyp_mappings(from, to, NULL); -} - -/** - * create_hyp_io_mappings - duplicate a kernel IO mapping into Hyp mode - * @from: The kernel start VA of the range - * @to: The kernel end VA of the range (exclusive) - * @addr: The physical start address which gets mapped - * - * The resulting HYP VA is the same as the kernel VA, modulo - * HYP_PAGE_OFFSET. - */ -int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr) -{ - unsigned long pfn = __phys_to_pfn(addr); - return __create_hyp_mappings(from, to, &pfn); -} - -/** - * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation. - * @kvm: The KVM struct pointer for the VM. - * - * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can - * support either full 40-bit input addresses or limited to 32-bit input - * addresses). Clears the allocated pages. - * - * Note we don't need locking here as this is only called when the VM is - * created, which can only be done once. - */ -int kvm_alloc_stage2_pgd(struct kvm *kvm) -{ - pgd_t *pgd; - - if (kvm->arch.pgd != NULL) { - kvm_err("kvm_arch already initialized?\n"); - return -EINVAL; - } - - pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, S2_PGD_ORDER); - if (!pgd) - return -ENOMEM; - - /* stage-2 pgd must be aligned to its size */ - VM_BUG_ON((unsigned long)pgd & (S2_PGD_SIZE - 1)); - - memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t)); - kvm_clean_pgd(pgd); - kvm->arch.pgd = pgd; - - return 0; -} - static void clear_pud_entry(pud_t *pud) { pmd_t *pmd_table = pmd_offset(pud, 0); @@ -343,28 +114,17 @@ static bool pte_empty(pte_t *pte) return page_count(pte_page) == 1; } -/** - * unmap_stage2_range -- Clear stage2 page table entries to unmap a range - * @kvm: The VM pointer - * @start: The intermediate physical base address of the range to unmap - * @size: The size of the area to unmap - * - * Clear a range of stage-2 mappings, lowering the various ref-counts. Must - * be called while holding mmu_lock (unless for freeing the stage2 pgd before - * destroying the VM), otherwise another faulting VCPU may come in and mess - * with things behind our backs. - */ -static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) +static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; pte_t *pte; - phys_addr_t addr = start, end = start + size; + unsigned long long addr = start, end = start + size; u64 range; while (addr < end) { - pgd = kvm->arch.pgd + pgd_index(addr); + pgd = pgdp + pgd_index(addr); pud = pud_offset(pgd, addr); if (pud_none(*pud)) { addr += PUD_SIZE; @@ -395,6 +155,247 @@ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) } } +/** + * free_boot_hyp_pgd - free HYP boot page tables + * + * Free the HYP boot page tables. The bounce page is also freed. + */ +void free_boot_hyp_pgd(void) +{ + mutex_lock(&kvm_hyp_pgd_mutex); + + if (boot_hyp_pgd) { + unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + kfree(boot_hyp_pgd); + boot_hyp_pgd = NULL; + } + + if (hyp_pgd) + unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + + kfree(init_bounce_page); + init_bounce_page = NULL; + + mutex_unlock(&kvm_hyp_pgd_mutex); +} + +/** + * free_hyp_pgds - free Hyp-mode page tables + * + * Assumes hyp_pgd is a page table used strictly in Hyp-mode and + * therefore contains either mappings in the kernel memory area (above + * PAGE_OFFSET), or device mappings in the vmalloc range (from + * VMALLOC_START to VMALLOC_END). + * + * boot_hyp_pgd should only map two pages for the init code. + */ +void free_hyp_pgds(void) +{ + unsigned long addr; + + free_boot_hyp_pgd(); + + mutex_lock(&kvm_hyp_pgd_mutex); + + if (hyp_pgd) { + for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) + unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) + unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); + hyp_pgd = NULL; + } + + mutex_unlock(&kvm_hyp_pgd_mutex); +} + +static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start, + unsigned long end, unsigned long pfn, + pgprot_t prot) +{ + pte_t *pte; + unsigned long addr; + + addr = start; + do { + pte = pte_offset_kernel(pmd, addr); + kvm_set_pte(pte, pfn_pte(pfn, prot)); + get_page(virt_to_page(pte)); + kvm_flush_dcache_to_poc(pte, sizeof(*pte)); + pfn++; + } while (addr += PAGE_SIZE, addr != end); +} + +static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start, + unsigned long end, unsigned long pfn, + pgprot_t prot) +{ + pmd_t *pmd; + pte_t *pte; + unsigned long addr, next; + + addr = start; + do { + pmd = pmd_offset(pud, addr); + + BUG_ON(pmd_sect(*pmd)); + + if (pmd_none(*pmd)) { + pte = pte_alloc_one_kernel(NULL, addr); + if (!pte) { + kvm_err("Cannot allocate Hyp pte\n"); + return -ENOMEM; + } + pmd_populate_kernel(NULL, pmd, pte); + get_page(virt_to_page(pmd)); + kvm_flush_dcache_to_poc(pmd, sizeof(*pmd)); + } + + next = pmd_addr_end(addr, end); + + create_hyp_pte_mappings(pmd, addr, next, pfn, prot); + pfn += (next - addr) >> PAGE_SHIFT; + } while (addr = next, addr != end); + + return 0; +} + +static int __create_hyp_mappings(pgd_t *pgdp, + unsigned long start, unsigned long end, + unsigned long pfn, pgprot_t prot) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + unsigned long addr, next; + int err = 0; + + mutex_lock(&kvm_hyp_pgd_mutex); + addr = start & PAGE_MASK; + end = PAGE_ALIGN(end); + do { + pgd = pgdp + pgd_index(addr); + pud = pud_offset(pgd, addr); + + if (pud_none_or_clear_bad(pud)) { + pmd = pmd_alloc_one(NULL, addr); + if (!pmd) { + kvm_err("Cannot allocate Hyp pmd\n"); + err = -ENOMEM; + goto out; + } + pud_populate(NULL, pud, pmd); + get_page(virt_to_page(pud)); + kvm_flush_dcache_to_poc(pud, sizeof(*pud)); + } + + next = pgd_addr_end(addr, end); + err = create_hyp_pmd_mappings(pud, addr, next, pfn, prot); + if (err) + goto out; + pfn += (next - addr) >> PAGE_SHIFT; + } while (addr = next, addr != end); +out: + mutex_unlock(&kvm_hyp_pgd_mutex); + return err; +} + +/** + * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode + * @from: The virtual kernel start address of the range + * @to: The virtual kernel end address of the range (exclusive) + * + * The same virtual address as the kernel virtual address is also used + * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying + * physical pages. + */ +int create_hyp_mappings(void *from, void *to) +{ + unsigned long phys_addr = virt_to_phys(from); + unsigned long start = KERN_TO_HYP((unsigned long)from); + unsigned long end = KERN_TO_HYP((unsigned long)to); + + /* Check for a valid kernel memory mapping */ + if (!virt_addr_valid(from) || !virt_addr_valid(to - 1)) + return -EINVAL; + + return __create_hyp_mappings(hyp_pgd, start, end, + __phys_to_pfn(phys_addr), PAGE_HYP); +} + +/** + * create_hyp_io_mappings - duplicate a kernel IO mapping into Hyp mode + * @from: The kernel start VA of the range + * @to: The kernel end VA of the range (exclusive) + * @phys_addr: The physical start address which gets mapped + * + * The resulting HYP VA is the same as the kernel VA, modulo + * HYP_PAGE_OFFSET. + */ +int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) +{ + unsigned long start = KERN_TO_HYP((unsigned long)from); + unsigned long end = KERN_TO_HYP((unsigned long)to); + + /* Check for a valid kernel IO mapping */ + if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1)) + return -EINVAL; + + return __create_hyp_mappings(hyp_pgd, start, end, + __phys_to_pfn(phys_addr), PAGE_HYP_DEVICE); +} + +/** + * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation. + * @kvm: The KVM struct pointer for the VM. + * + * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can + * support either full 40-bit input addresses or limited to 32-bit input + * addresses). Clears the allocated pages. + * + * Note we don't need locking here as this is only called when the VM is + * created, which can only be done once. + */ +int kvm_alloc_stage2_pgd(struct kvm *kvm) +{ + pgd_t *pgd; + + if (kvm->arch.pgd != NULL) { + kvm_err("kvm_arch already initialized?\n"); + return -EINVAL; + } + + pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, S2_PGD_ORDER); + if (!pgd) + return -ENOMEM; + + /* stage-2 pgd must be aligned to its size */ + VM_BUG_ON((unsigned long)pgd & (S2_PGD_SIZE - 1)); + + memset(pgd, 0, PTRS_PER_S2_PGD * sizeof(pgd_t)); + kvm_clean_pgd(pgd); + kvm->arch.pgd = pgd; + + return 0; +} + +/** + * unmap_stage2_range -- Clear stage2 page table entries to unmap a range + * @kvm: The VM pointer + * @start: The intermediate physical base address of the range to unmap + * @size: The size of the area to unmap + * + * Clear a range of stage-2 mappings, lowering the various ref-counts. Must + * be called while holding mmu_lock (unless for freeing the stage2 pgd before + * destroying the VM), otherwise another faulting VCPU may come in and mess + * with things behind our backs. + */ +static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) +{ + unmap_range(kvm->arch.pgd, start, size); +} + /** * kvm_free_stage2_pgd - free all stage-2 tables * @kvm: The KVM struct pointer for the VM. @@ -728,47 +729,105 @@ void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu) phys_addr_t kvm_mmu_get_httbr(void) { - VM_BUG_ON(!virt_addr_valid(hyp_pgd)); return virt_to_phys(hyp_pgd); } +phys_addr_t kvm_mmu_get_boot_httbr(void) +{ + return virt_to_phys(boot_hyp_pgd); +} + +phys_addr_t kvm_get_idmap_vector(void) +{ + return hyp_idmap_vector; +} + int kvm_mmu_init(void) { - if (!hyp_pgd) { + int err; + + hyp_idmap_start = virt_to_phys(__hyp_idmap_text_start); + hyp_idmap_end = virt_to_phys(__hyp_idmap_text_end); + hyp_idmap_vector = virt_to_phys(__kvm_hyp_init); + + if ((hyp_idmap_start ^ hyp_idmap_end) & PAGE_MASK) { + /* + * Our init code is crossing a page boundary. Allocate + * a bounce page, copy the code over and use that. + */ + size_t len = __hyp_idmap_text_end - __hyp_idmap_text_start; + phys_addr_t phys_base; + + init_bounce_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!init_bounce_page) { + kvm_err("Couldn't allocate HYP init bounce page\n"); + err = -ENOMEM; + goto out; + } + + memcpy(init_bounce_page, __hyp_idmap_text_start, len); + /* + * Warning: the code we just copied to the bounce page + * must be flushed to the point of coherency. + * Otherwise, the data may be sitting in L2, and HYP + * mode won't be able to observe it as it runs with + * caches off at that point. + */ + kvm_flush_dcache_to_poc(init_bounce_page, len); + + phys_base = virt_to_phys(init_bounce_page); + hyp_idmap_vector += phys_base - hyp_idmap_start; + hyp_idmap_start = phys_base; + hyp_idmap_end = phys_base + len; + + kvm_info("Using HYP init bounce page @%lx\n", + (unsigned long)phys_base); + } + + hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + boot_hyp_pgd = kzalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL); + if (!hyp_pgd || !boot_hyp_pgd) { kvm_err("Hyp mode PGD not allocated\n"); - return -ENOMEM; + err = -ENOMEM; + goto out; + } + + /* Create the idmap in the boot page tables */ + err = __create_hyp_mappings(boot_hyp_pgd, + hyp_idmap_start, hyp_idmap_end, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP); + + if (err) { + kvm_err("Failed to idmap %lx-%lx\n", + hyp_idmap_start, hyp_idmap_end); + goto out; + } + + /* Map the very same page at the trampoline VA */ + err = __create_hyp_mappings(boot_hyp_pgd, + TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP); + if (err) { + kvm_err("Failed to map trampoline @%lx into boot HYP pgd\n", + TRAMPOLINE_VA); + goto out; + } + + /* Map the same page again into the runtime page tables */ + err = __create_hyp_mappings(hyp_pgd, + TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP); + if (err) { + kvm_err("Failed to map trampoline @%lx into runtime HYP pgd\n", + TRAMPOLINE_VA); + goto out; } return 0; -} - -/** - * kvm_clear_idmap - remove all idmaps from the hyp pgd - * - * Free the underlying pmds for all pgds in range and clear the pgds (but - * don't free them) afterwards. - */ -void kvm_clear_hyp_idmap(void) -{ - unsigned long addr, end; - unsigned long next; - pgd_t *pgd = hyp_pgd; - pud_t *pud; - pmd_t *pmd; - - addr = virt_to_phys(__hyp_idmap_text_start); - end = virt_to_phys(__hyp_idmap_text_end); - - pgd += pgd_index(addr); - do { - next = pgd_addr_end(addr, end); - if (pgd_none_or_clear_bad(pgd)) - continue; - pud = pud_offset(pgd, addr); - pmd = pmd_offset(pud, addr); - - pud_clear(pud); - kvm_clean_pmd_entry(pmd); - pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK)); - } while (pgd++, addr = next, addr < end); +out: + free_hyp_pgds(); + return err; } diff --git a/arch/arm/kvm/perf.c b/arch/arm/kvm/perf.c new file mode 100644 index 000000000000..1a3849da0b4b --- /dev/null +++ b/arch/arm/kvm/perf.c @@ -0,0 +1,68 @@ +/* + * Based on the x86 implementation. + * + * Copyright (C) 2012 ARM Ltd. + * Author: Marc Zyngier + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include + +#include + +static int kvm_is_in_guest(void) +{ + return kvm_arm_get_running_vcpu() != NULL; +} + +static int kvm_is_user_mode(void) +{ + struct kvm_vcpu *vcpu; + + vcpu = kvm_arm_get_running_vcpu(); + + if (vcpu) + return !vcpu_mode_priv(vcpu); + + return 0; +} + +static unsigned long kvm_get_guest_ip(void) +{ + struct kvm_vcpu *vcpu; + + vcpu = kvm_arm_get_running_vcpu(); + + if (vcpu) + return *vcpu_pc(vcpu); + + return 0; +} + +static struct perf_guest_info_callbacks kvm_guest_cbs = { + .is_in_guest = kvm_is_in_guest, + .is_user_mode = kvm_is_user_mode, + .get_guest_ip = kvm_get_guest_ip, +}; + +int kvm_perf_init(void) +{ + return perf_register_guest_info_callbacks(&kvm_guest_cbs); +} + +int kvm_perf_teardown(void) +{ + return perf_unregister_guest_info_callbacks(&kvm_guest_cbs); +} diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2acdff4c1dfe..180b3024bec3 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ + clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); + clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); + clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, - 2, AT91_ST_ALMV); + clockevents_register_device(&clkevt); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 13cdbcd48f51..c7d670d11802 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void) at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE); } -void __init at91sam9n12_initialize(void) -{ - at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); -} - AT91_SOC_START(at91sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, - .init = at91sam9n12_initialize, AT91_SOC_END diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c index 48f1228c611c..69f9e3bbf4e5 100644 --- a/arch/arm/mach-at91/cpuidle.c +++ b/arch/arm/mach-at91/cpuidle.c @@ -36,6 +36,8 @@ static int at91_enter_idle(struct cpuidle_device *dev, at91rm9200_standby(); else if (cpu_is_at91sam9g45()) at91sam9g45_standby(); + else if (cpu_is_at91sam9263()) + at91sam9263_standby(); else at91sam9_standby(); diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 31df12029c4e..2bd7f51b0b82 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base; #define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ #define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ #define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ -#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */ -#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */ -#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ #define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ #endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0f3379fe645f..d3d7b993846b 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -86,7 +86,7 @@ enum at91_soc_type { AT91_SOC_SAMA5D3, /* Unknown type */ - AT91_SOC_NONE + AT91_SOC_UNKNOWN, }; enum at91_soc_subtype { @@ -107,8 +107,11 @@ enum at91_soc_subtype { AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34, AT91_SOC_SAMA5D35, + /* No subtype for this SoC */ + AT91_SOC_SUBTYPE_NONE, + /* Unknown subtype */ - AT91_SOC_SUBTYPE_NONE + AT91_SOC_SUBTYPE_UNKNOWN, }; struct at91_socinfo { @@ -122,7 +125,7 @@ const char *at91_get_soc_subtype(struct at91_socinfo *c); static inline int at91_soc_is_detected(void) { - return at91_soc_initdata.type != AT91_SOC_NONE; + return at91_soc_initdata.type != AT91_SOC_UNKNOWN; } #ifdef CONFIG_SOC_AT91RM9200 diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 73f1f250403a..530db304ec5e 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -270,6 +270,8 @@ static int at91_pm_enter(suspend_state_t state) at91rm9200_standby(); else if (cpu_is_at91sam9g45()) at91sam9g45_standby(); + else if (cpu_is_at91sam9263()) + at91sam9263_standby(); else at91sam9_standby(); break; diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 38f467c6b710..2f5908f0b8c5 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -70,13 +70,31 @@ static inline void at91sam9g45_standby(void) at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); } -#ifdef CONFIG_SOC_AT91SAM9263 -/* - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; - * handle those cases both here and in the Suspend-To-RAM support. +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. */ -#warning Assuming EB1 SDRAM controller is *NOT* used -#endif +static inline void at91sam9263_standby(void) +{ + u32 lpr0, lpr1; + u32 saved_lpr0, saved_lpr1; + + saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR); + lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB; + lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR); + lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB; + lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0); + at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1); + + cpu_do_idle(); + + at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0); + at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1); +} static inline void at91sam9_standby(void) { diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e8491e77b1f7..e2f4bdd146d6 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -105,28 +105,32 @@ static void __init soc_detect(u32 dbgu_base) switch (socid) { case ARCH_ID_AT91RM9200: at91_soc_initdata.type = AT91_SOC_RM9200; - if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE) + if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN) at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; at91_boot_soc = at91rm9200_soc; break; case ARCH_ID_AT91SAM9260: at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9260_soc; break; case ARCH_ID_AT91SAM9261: at91_soc_initdata.type = AT91_SOC_SAM9261; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9261_soc; break; case ARCH_ID_AT91SAM9263: at91_soc_initdata.type = AT91_SOC_SAM9263; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9263_soc; break; case ARCH_ID_AT91SAM9G20: at91_soc_initdata.type = AT91_SOC_SAM9G20; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9260_soc; break; @@ -139,6 +143,7 @@ static void __init soc_detect(u32 dbgu_base) case ARCH_ID_AT91SAM9RL64: at91_soc_initdata.type = AT91_SOC_SAM9RL; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9rl_soc; break; @@ -161,6 +166,7 @@ static void __init soc_detect(u32 dbgu_base) /* at91sam9g10 */ if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; at91_boot_soc = at91sam9261_soc; } /* at91sam9xe */ @@ -242,7 +248,7 @@ static const char *soc_name[] = { [AT91_SOC_SAM9X5] = "at91sam9x5", [AT91_SOC_SAM9N12] = "at91sam9n12", [AT91_SOC_SAMA5D3] = "sama5d3", - [AT91_SOC_NONE] = "Unknown" + [AT91_SOC_UNKNOWN] = "Unknown", }; const char *at91_get_soc_type(struct at91_socinfo *c) @@ -268,7 +274,8 @@ static const char *soc_subtype_name[] = { [AT91_SOC_SAMA5D33] = "sama5d33", [AT91_SOC_SAMA5D34] = "sama5d34", [AT91_SOC_SAMA5D35] = "sama5d35", - [AT91_SOC_SUBTYPE_NONE] = "Unknown" + [AT91_SOC_SUBTYPE_NONE] = "None", + [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown", }; const char *at91_get_soc_subtype(struct at91_socinfo *c) @@ -282,8 +289,8 @@ void __init at91_map_io(void) /* Map peripherals */ iotable_init(&at91_io_desc, 1); - at91_soc_initdata.type = AT91_SOC_NONE; - at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; + at91_soc_initdata.type = AT91_SOC_UNKNOWN; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN; soc_detect(AT91_BASE_DBGU0); if (!at91_soc_is_detected()) @@ -294,8 +301,9 @@ void __init at91_map_io(void) pr_info("AT91: Detected soc type: %s\n", at91_get_soc_type(&at91_soc_initdata)); - pr_info("AT91: Detected soc subtype: %s\n", - at91_get_soc_subtype(&at91_soc_initdata)); + if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE) + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); if (!at91_soc_is_enabled()) panic("AT91: Soc not enabled"); diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c index b1c0a5958275..961aea8bbad5 100644 --- a/arch/arm/mach-davinci/da8xx-dt.c +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -41,6 +41,12 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL), OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL), OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL), + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f00000, "ehrpwm", NULL), + OF_DEV_AUXDATA("ti,da850-ehrpwm", 0x01f02000, "ehrpwm", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f06000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f07000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da850-ecap", 0x01f08000, "ecap", NULL), + OF_DEV_AUXDATA("ti,da830-spi", 0x01f0e000, "spi_davinci.1", NULL), {} }; diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index 3f0a858fb597..4d9d2ffc4535 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o +obj-y += common.o irq.o obj-$(CONFIG_DOVE_LEGACY) += mpp.o obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c deleted file mode 100644 index 2a06c0163418..000000000000 --- a/arch/arm/mach-dove/addr-map.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * arch/arm/mach-dove/addr-map.c - * - * Address map functions for Marvell Dove 88AP510 SoC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0x0 -#define TARGET_BOOTROM 0x1 -#define TARGET_CESA 0x3 -#define TARGET_PCIE0 0x4 -#define TARGET_PCIE1 0x8 -#define TARGET_SCRATCHPAD 0xd - -#define ATTR_CESA 0x01 -#define ATTR_BOOTROM 0xfd -#define ATTR_DEV_SPI0_ROM 0xfe -#define ATTR_DEV_SPI1_ROM 0xfb -#define ATTR_PCIE_IO 0xe0 -#define ATTR_PCIE_MEM 0xe8 -#define ATTR_SCRATCHPAD 0x0 - -static inline void __iomem *ddr_map_sc(int i) -{ - return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4)); -} - -/* - * Description of the windows needed by the platform code - */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { - .num_wins = 8, - .remappable_wins = 4, - .bridge_virt_base = BRIDGE_VIRT_BASE, -}; - -static const struct __initdata orion_addr_map_info addr_map_info[] = { - /* - * Windows for PCIe IO+MEM space. - */ - { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE, - TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE - }, - { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE, - TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE - }, - { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE, - TARGET_PCIE0, ATTR_PCIE_MEM, -1 - }, - { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE, - TARGET_PCIE1, ATTR_PCIE_MEM, -1 - }, - /* - * Window for CESA engine. - */ - { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE, - TARGET_CESA, ATTR_CESA, -1 - }, - /* - * Window to the BootROM for Standby and Sleep Resume - */ - { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE, - TARGET_BOOTROM, ATTR_BOOTROM, -1 - }, - /* - * Window to the PMU Scratch Pad space - */ - { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE, - TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1 - }, - /* End marker */ - { -1, 0, 0, 0, 0, 0 } -}; - -void __init dove_setup_cpu_mbus(void) -{ - int i; - int cs; - - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, addr_map_info); - - /* - * Setup MBUS dram target info. - */ - orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 2; i++) { - u32 map = readl(ddr_map_sc(i)); - - /* - * Chip select enabled? - */ - if (map & 1) { - struct mbus_dram_window *w; - - w = &orion_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0; /* CS address decoding done inside */ - /* the DDR controller, no need to */ - /* provide attributes */ - w->base = map & 0xff800000; - w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4); - } - } - orion_mbus_dram_info.num_cs = cs; -} diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index fbde1dd67113..0b142803b2e1 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -64,7 +64,7 @@ static void __init dove_dt_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_mbus(); + dove_setup_cpu_wins(); /* Setup root of clk tree */ dove_of_clk_init(); diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index c6b3b2bb50e7..e2b5da031f96 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -224,6 +224,9 @@ void __init dove_i2c_init(void) void __init dove_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + mvebu_mbus_init("marvell,dove-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); } static int __init dove_find_tclk(void) @@ -326,6 +329,40 @@ void __init dove_sdio1_init(void) platform_device_register(&dove_sdio1); } +void __init dove_setup_cpu_wins(void) +{ + /* + * The PCIe windows will no longer be statically allocated + * here once Dove is migrated to the pci-mvebu driver. + */ + mvebu_mbus_add_window_remap_flags("pcie0.0", + DOVE_PCIE0_IO_PHYS_BASE, + DOVE_PCIE0_IO_SIZE, + DOVE_PCIE0_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie1.0", + DOVE_PCIE1_IO_PHYS_BASE, + DOVE_PCIE1_IO_SIZE, + DOVE_PCIE1_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie0.0", + DOVE_PCIE0_MEM_PHYS_BASE, + DOVE_PCIE0_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags("pcie1.0", + DOVE_PCIE1_MEM_PHYS_BASE, + DOVE_PCIE1_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE); + mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE, + DOVE_BOOTROM_SIZE); + mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE, + DOVE_SCRATCHPAD_SIZE); +} + void __init dove_init(void) { pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", @@ -334,7 +371,7 @@ void __init dove_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_mbus(); + dove_setup_cpu_wins(); /* Setup root of clk tree */ dove_clk_init(); diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index ee59fba4c6d1..e86347928b67 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -23,7 +23,7 @@ void dove_map_io(void); void dove_init(void); void dove_init_early(void); void dove_init_irq(void); -void dove_setup_cpu_mbus(void); +void dove_setup_cpu_wins(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); void dove_sata_init(struct mv_sata_platform_data *sata_data); #ifdef CONFIG_PCI diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index 661725e3115a..0c4b35f4ee5b 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -77,6 +77,8 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) #define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) +#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) +#define BRIDGE_WINS_SZ (0x80) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) @@ -168,6 +170,9 @@ #define DOVE_SSP_CLOCK_ENABLE (1 << 1) #define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) /* Memory Controller */ +#define DOVE_MC_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x00000) +#define DOVE_MC_WINS_BASE (DOVE_MC_PHYS_BASE + 0x100) +#define DOVE_MC_WINS_SZ (0x8) #define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) /* LCD Controller */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff0ea6e..ff18fc2ea46f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 46089fe24705..027c9e7f0d13 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include +#include #include #include #include #include #include #include +#include #include #include #include @@ -120,17 +122,6 @@ static struct map_desc exynos_iodesc[] __initdata = { }, }; -#ifdef CONFIG_ARCH_EXYNOS5 -static struct map_desc exynos5440_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_CHIPID, - .pfn = __phys_to_pfn(EXYNOS5440_PA_CHIPID), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; -#endif - static struct map_desc exynos4_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -313,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -328,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; @@ -348,6 +353,31 @@ void __init exynos_init_late(void) exynos_pm_late_initcall(); } +#ifdef CONFIG_OF +int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, + int depth, void *data) +{ + struct map_desc iodesc; + __be32 *reg; + unsigned long len; + + if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && + !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) + return 0; + + reg = of_get_flat_dt_prop(node, "reg", &len); + if (reg == NULL || len != (sizeof(unsigned long) * 2)) + return 0; + + iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0])); + iodesc.length = be32_to_cpu(reg[1]) - 1; + iodesc.virtual = (unsigned long)S5P_VA_CHIPID; + iodesc.type = MT_DEVICE; + iotable_init(&iodesc, 1); + return 1; +} +#endif + /* * exynos_map_io * @@ -356,19 +386,12 @@ void __init exynos_init_late(void) void __init exynos_init_io(struct map_desc *mach_desc, int size) { - struct map_desc *iodesc = exynos_iodesc; - int iodesc_sz = ARRAY_SIZE(exynos_iodesc); -#if defined(CONFIG_OF) && defined(CONFIG_ARCH_EXYNOS5) - unsigned long root = of_get_flat_dt_root(); - - /* initialize the io descriptors we need for initialization */ - if (of_flat_dt_is_compatible(root, "samsung,exynos5440")) { - iodesc = exynos5440_iodesc; - iodesc_sz = ARRAY_SIZE(exynos5440_iodesc); - } +#ifdef CONFIG_OF + if (initial_boot_params) + of_scan_flat_dt(exynos_fdt_map_chipid, NULL); + else #endif - - iotable_init(iodesc, iodesc_sz); + iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc)); if (mach_desc) iotable_init(mach_desc, size); @@ -435,8 +458,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -445,13 +480,33 @@ void __init exynos_init_time(void) } else { /* todo: remove after migrating legacy E4 platforms to dt */ #ifdef CONFIG_ARCH_EXYNOS4 - exynos4_clk_init(NULL); + exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } +static unsigned int max_combiner_nr(void) +{ + if (soc_is_exynos5250()) + return EXYNOS5_MAX_COMBINER_NR; + else if (soc_is_exynos4412()) + return EXYNOS4412_MAX_COMBINER_NR; + else if (soc_is_exynos4212()) + return EXYNOS4212_MAX_COMBINER_NR; + else + return EXYNOS4210_MAX_COMBINER_NR; +} + + void __init exynos4_init_irq(void) { unsigned int gic_bank_offset; @@ -466,14 +521,8 @@ void __init exynos4_init_irq(void) #endif if (!of_have_populated_dt()) - combiner_init(S5P_VA_COMBINER_BASE, NULL); - - /* - * The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because EXYNOS4 - * uses GIC instead of VIC. - */ - s5p_init_irq(NULL, 0); + combiner_init(S5P_VA_COMBINER_BASE, NULL, + max_combiner_nr(), COMBINER_IRQ(0, 0)); gic_arch_extn.irq_set_wake = s3c_irq_wake; } @@ -483,14 +532,6 @@ void __init exynos5_init_irq(void) #ifdef CONFIG_OF irqchip_init(); #endif - /* - * The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because EXYNOS4 - * uses GIC instead of VIC. - */ - if (!of_machine_is_compatible("samsung,exynos5440")) - s5p_init_irq(NULL, 0); - gic_arch_extn.irq_set_wake = s3c_irq_wake; } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index b17448c1a164..11fc1e29819b 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -14,7 +14,7 @@ #include -extern void mct_init(void); +void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); void exynos_init_time(void); extern unsigned long xxti_f, xusbxti_f; @@ -27,11 +27,13 @@ void exynos5_restart(char mode, const char *cmd); void exynos_init_late(void); /* ToDo: remove these after migrating legacy exynos4 platforms to dt */ -void exynos4_clk_init(struct device_node *np); +void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom); void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else @@ -71,7 +73,8 @@ void exynos4212_register_clocks(void); #endif struct device_node; -void combiner_init(void __iomem *combiner_base, struct device_node *np); +void combiner_init(void __iomem *combiner_base, struct device_node *np, + unsigned int max_nr, int irq_base); extern struct smp_operations exynos_smp_ops; diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 99e0a79f3b1f..92b29bb583cb 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -56,7 +56,6 @@ #define EXYNOS4_PA_ONENAND_DMA 0x0C600000 #define EXYNOS_PA_CHIPID 0x10000000 -#define EXYNOS5440_PA_CHIPID 0x00160000 #define EXYNOS4_PA_SYSCON 0x10010000 #define EXYNOS5_PA_SYSCON 0x10050100 diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec13ea5..296090e7f423 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include #include +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 3f30aa1ae354..57344b7e98ce 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -344,6 +344,7 @@ #define EXYNOS5_FSYS_ARM_OPTION S5P_PMUREG(0x2208) #define EXYNOS5_ISP_ARM_OPTION S5P_PMUREG(0x2288) #define EXYNOS5_ARM_COMMON_OPTION S5P_PMUREG(0x2408) +#define EXYNOS5_ARM_L2_OPTION S5P_PMUREG(0x2608) #define EXYNOS5_TOP_PWR_OPTION S5P_PMUREG(0x2C48) #define EXYNOS5_TOP_PWR_SYSMEM_OPTION S5P_PMUREG(0x2CC8) #define EXYNOS5_JPEG_MEM_OPTION S5P_PMUREG(0x2F48) diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d4681d..74ddb2b55614 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index daebc1abc966..97d688526258 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -228,6 +228,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = { { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} }, { EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} }, { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} }, + { EXYNOS5_ARM_L2_OPTION, { 0x10, 0x10, 0x0 } }, { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} }, { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} }, @@ -353,11 +354,9 @@ static void exynos5_init_pmu(void) /* * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable - * MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable */ tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION); - tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL | - EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN); + tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN; __raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION); /* diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 76c1170b3528..e7df2dd43a40 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -15,6 +15,7 @@ */ #include #include +#include #include #include #include @@ -28,12 +29,9 @@ #include #include -#include #include #include #include -#include -#include #include #include #include @@ -90,36 +88,16 @@ static void __init highbank_init_irq(void) #endif } -static struct clk_lookup lookup = { - .dev_id = "sp804", - .con_id = NULL, -}; - static void __init highbank_timer_init(void) { - int irq; struct device_node *np; - void __iomem *timer_base; /* Map system registers */ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs"); sregs_base = of_iomap(np, 0); WARN_ON(!sregs_base); - np = of_find_compatible_node(NULL, NULL, "arm,sp804"); - timer_base = of_iomap(np, 0); - WARN_ON(!timer_base); - irq = irq_of_parse_and_map(np, 0); - of_clk_init(NULL); - lookup.clk = of_clk_get(np, 0); - clkdev_add(&lookup); - - sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); - sp804_clockevents_init(timer_base, irq, "timer0"); - - arch_timer_of_register(); - arch_timer_sched_clock_init(); clocksource_of_init(); } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index d58ad4ff8d34..ba44328464f3 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -5,6 +5,7 @@ config ARCH_MXC select AUTO_ZRELADDR if !ZBOOT_ROM select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER @@ -61,9 +62,8 @@ config MXC_ULPI config ARCH_HAS_RNGA bool -config IRAM_ALLOC +config HAVE_IMX_ANATOP bool - select GENERIC_ALLOCATOR config HAVE_IMX_GPC bool @@ -73,6 +73,7 @@ config HAVE_IMX_MMDC config HAVE_IMX_SRC def_bool y if SMP + select ARCH_HAS_RESET_CONTROLLER config IMX_HAVE_IOMUX_V1 bool @@ -115,6 +116,8 @@ config SOC_IMX25 config SOC_IMX27 bool + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select COMMON_CLK select CPU_ARM926T select IMX_HAVE_IOMUX_V1 @@ -142,6 +145,7 @@ config SOC_IMX35 config SOC_IMX5 bool select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_MXC_IOMUX_V3 select COMMON_CLK select CPU_V7 @@ -466,8 +470,6 @@ config MACH_MX31ADS_WM1133_EV1 depends on MACH_MX31ADS depends on MFD_WM8350_I2C depends on REGULATOR_WM8350 = y - select MFD_WM8350_CONFIG_MODE_0 - select MFD_WM8352_CONFIG_MODE_0 help Include support for the Wolfson Microelectronics 1133-EV1 PMU and audio module for the MX31ADS platform. @@ -785,7 +787,7 @@ config SOC_IMX53 This enables support for Freescale i.MX53 processor. config SOC_IMX6Q - bool "i.MX6 Quad support" + bool "i.MX6 Quad/DualLite support" select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM @@ -798,6 +800,7 @@ config SOC_IMX6Q select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CAN_FLEXCAN if CAN + select HAVE_IMX_ANATOP select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index fbe60a145344..70ae7c490ac0 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_TZIC) += tzic.o obj-$(CONFIG_MXC_AVIC) += avic.o -obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o @@ -91,6 +90,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o +obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c new file mode 100644 index 000000000000..0cfa07dd9aa4 --- /dev/null +++ b/arch/arm/mach-imx/anatop.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include "common.h" + +#define REG_SET 0x4 +#define REG_CLR 0x8 + +#define ANADIG_REG_2P5 0x130 +#define ANADIG_REG_CORE 0x140 +#define ANADIG_ANA_MISC0 0x150 +#define ANADIG_USB1_CHRG_DETECT 0x1b0 +#define ANADIG_USB2_CHRG_DETECT 0x210 +#define ANADIG_DIGPROG 0x260 + +#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 +#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 +#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 +#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 + +static struct regmap *anatop; + +static void imx_anatop_enable_weak2p5(bool enable) +{ + u32 reg, val; + + regmap_read(anatop, ANADIG_ANA_MISC0, &val); + + /* can only be enabled when stop_mode_config is clear. */ + reg = ANADIG_REG_2P5; + reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ? + REG_SET : REG_CLR; + regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG); +} + +static void imx_anatop_enable_fet_odrive(bool enable) +{ + regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR), + BM_ANADIG_REG_CORE_FET_ODRIVE); +} + +void imx_anatop_pre_suspend(void) +{ + imx_anatop_enable_weak2p5(true); + imx_anatop_enable_fet_odrive(true); +} + +void imx_anatop_post_resume(void) +{ + imx_anatop_enable_fet_odrive(false); + imx_anatop_enable_weak2p5(false); +} + +void imx_anatop_usb_chrg_detect_disable(void) +{ + regmap_write(anatop, ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + regmap_write(anatop, ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); +} + +u32 imx_anatop_get_digprog(void) +{ + struct device_node *np; + void __iomem *anatop_base; + static u32 digprog; + + if (digprog) + return digprog; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + anatop_base = of_iomap(np, 0); + WARN_ON(!anatop_base); + digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG); + + return digprog; +} + +void __init imx_anatop_init(void) +{ + anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); + if (IS_ERR(anatop)) { + pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__); + return; + } +} diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 2bc623b414c1..6fc486b6a3c6 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -45,16 +45,40 @@ static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", " static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; -static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", }; +static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", }; static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; +static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" }; +static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" }; static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", }; +static const char *mx53_cko1_sel[] = { + "cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw", + "emi_slow_podf", "pll4_sw", "nfc_podf", "dummy", + "di_pred", "dummy", "dummy", "ahb", + "ipg", "per_root", "ckil", "dummy",}; +static const char *mx53_cko2_sel[] = { + "dummy"/* dptc_core */, "dummy"/* dptc_perich */, + "dummy", "esdhc_a_podf", + "usboh3_podf", "dummy"/* wrck_clk_root */, + "ecspi_podf", "dummy"/* pll1_ref_clk */, + "esdhc_b_podf", "dummy"/* ddr_clk_root */, + "dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */, + "vpu_sel", "ipu_sel", + "osc", "ckih1", + "dummy", "esdhc_c_sel", + "ssi1_root_podf", "ssi2_root_podf", + "dummy", "dummy", + "dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */, + "dummy"/* tve_out */, "usb_phy_sel", + "tve_sel", "lp_apm", + "uart_root", "dummy"/* spdif0_clk_root */, + "dummy", "dummy", }; enum imx5_clks { dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred, uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s, emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred, - usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di, + usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused, tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate, uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate, gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate, @@ -83,7 +107,10 @@ enum imx5_clks { ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, can_sel, can1_serial_gate, can1_ipg_gate, - owire_gate, + owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate, + cko1_sel, cko1_podf, cko1, + cko2_sel, cko2_podf, cko2, + srtc_gate, pata_gate, clk_max }; @@ -160,8 +187,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3); clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); - clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */ - clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel)); clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6); clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8); @@ -200,6 +225,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20); clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10); clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12); + clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel)); + clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel)); + clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2); + clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4); + clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14); clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel)); clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6); clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8); @@ -235,6 +265,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6); clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8); clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22); + clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28); + clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) @@ -286,7 +318,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1"); clk_register_clkdev(clk[dummy], NULL, "imx-keypad"); - clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0"); clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0"); clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL); clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0"); @@ -331,8 +362,10 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel)); clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3, mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel)); - clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, - mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel)); + clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, + mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT); + clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, + mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel)); clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30); clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3); clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); @@ -420,23 +453,23 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE); clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE); - clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1, - mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel)); clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1); + clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0); + clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1, + mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT); clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3); - clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1, - mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel)); clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1); + clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0); + clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1, + mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT); clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28); clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30); clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3, mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel)); clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3, mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel)); - clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, - mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel)); + clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, + mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT); clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30); clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3); clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); @@ -453,6 +486,16 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); + clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4, + mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel)); + clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3); + clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7); + + clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5, + mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel)); + clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3); + clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); + for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX53 clk %d: register failed with %ld\n", diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index d38e54f5b6d7..dda9a2bd3acb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -22,6 +23,12 @@ #include "clk.h" #include "common.h" +#include "hardware.h" + +#define CCR 0x0 +#define BM_CCR_WB_COUNT (0x7 << 16) +#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21) +#define BM_CCR_RBC_EN (0x1 << 27) #define CCGR0 0x68 #define CCGR1 0x6c @@ -67,6 +74,67 @@ void imx6q_set_chicken_bit(void) writel_relaxed(val, ccm_base + CGPR); } +static void imx6q_enable_rbc(bool enable) +{ + u32 val; + static bool last_rbc_mode; + + if (last_rbc_mode == enable) + return; + /* + * need to mask all interrupts in GPC before + * operating RBC configurations + */ + imx_gpc_mask_all(); + + /* configure RBC enable bit */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_EN; + val |= enable ? BM_CCR_RBC_EN : 0; + writel_relaxed(val, ccm_base + CCR); + + /* configure RBC count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_RBC_BYPASS_COUNT; + val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0; + writel(val, ccm_base + CCR); + + /* + * need to delay at least 2 cycles of CKIL(32K) + * due to hardware design requirement, which is + * ~61us, here we use 65us for safe + */ + udelay(65); + + /* restore GPC interrupt mask settings */ + imx_gpc_restore_all(); + + last_rbc_mode = enable; +} + +static void imx6q_enable_wb(bool enable) +{ + u32 val; + static bool last_wb_mode; + + if (last_wb_mode == enable) + return; + + /* configure well bias enable bit */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_WB_PER_AT_LPM; + val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0; + writel_relaxed(val, ccm_base + CLPCR); + + /* configure well bias count */ + val = readl_relaxed(ccm_base + CCR); + val &= ~BM_CCR_WB_COUNT; + val |= enable ? BM_CCR_WB_COUNT : 0; + writel_relaxed(val, ccm_base + CCR); + + last_wb_mode = enable; +} + int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) { u32 val = readl_relaxed(ccm_base + CLPCR); @@ -74,6 +142,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) val &= ~BM_CLPCR_LPM; switch (mode) { case WAIT_CLOCKED: + imx6q_enable_wb(false); + imx6q_enable_rbc(false); break; case WAIT_UNCLOCKED: val |= 0x1 << BP_CLPCR_LPM; @@ -92,6 +162,8 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; + imx6q_enable_wb(true); + imx6q_enable_rbc(true); break; default: return -EINVAL; @@ -105,33 +177,34 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; +static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", }; +static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; -static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video", +static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; + "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", }; enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, @@ -165,7 +238,7 @@ enum mx6q_clks { pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg, ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, - usbphy2_gate, clk_max + usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max }; static struct clk *clk[clk_max]; @@ -182,6 +255,21 @@ static struct clk_div_table clk_enet_ref_table[] = { { .val = 3, .div = 4, }, }; +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + int __init mx6q_clocks_init(void) { struct device_node *np; @@ -208,6 +296,14 @@ int __init mx6q_clocks_init(void) base = of_iomap(np, 0); WARN_ON(!base); + /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ + if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) { + post_div_table[1].div = 1; + post_div_table[2].div = 1; + video_div_table[1].div = 1; + video_div_table[2].div = 1; + }; + /* type name parent_name base div_mask */ clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); @@ -260,6 +356,10 @@ int __init mx6q_clocks_init(void) clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm"); base = of_iomap(np, 0); WARN_ON(!base); @@ -270,8 +370,8 @@ int __init mx6q_clocks_init(void) clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); @@ -283,8 +383,8 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); - clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); - clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels)); + clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); + clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); @@ -332,9 +432,9 @@ int __init mx6q_clocks_init(void) clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di0_podf] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0); clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); + clk[ldb_di1_podf] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); @@ -399,7 +499,7 @@ int __init mx6q_clocks_init(void) clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16); - clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18); + clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); @@ -448,6 +548,11 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[cko1], "cko1", NULL); clk_register_clkdev(clk[arm], NULL, "cpu0"); + if (imx6q_revision() != IMX_CHIP_REVISION_1_0) { + clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]); + clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); + } + /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, * We can not get the 100MHz from the pll2_pfd0_352m. diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 9d1f3b99d1d3..d9d9d9c66dff 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -59,6 +59,14 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent, reg, shift, width, 0, &imx_ccm_lock); } +static inline struct clk *imx_clk_divider_flags(const char *name, + const char *parent, void __iomem *reg, u8 shift, u8 width, + unsigned long flags) +{ + return clk_register_divider(NULL, name, parent, flags, + reg, shift, width, 0, &imx_ccm_lock); +} + static inline struct clk *imx_clk_gate(const char *name, const char *parent, void __iomem *reg, u8 shift) { @@ -73,6 +81,15 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg, width, 0, &imx_ccm_lock); } +static inline struct clk *imx_clk_mux_flags(const char *name, + void __iomem *reg, u8 shift, u8 width, const char **parents, + int num_parents, unsigned long flags) +{ + return clk_register_mux(NULL, name, parents, num_parents, + flags, reg, shift, width, 0, + &imx_ccm_lock); +} + static inline struct clk *imx_clk_fixed_factor(const char *name, const char *parent, unsigned int mult, unsigned int div) { diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 9fea2522d7a3..c08ae3f99cee 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved. */ /* @@ -12,6 +12,7 @@ #define __ASM_ARCH_MXC_COMMON_H__ struct platform_device; +struct pt_regs; struct clk; enum mxc_cpu_pwr_mode; @@ -74,6 +75,7 @@ extern void mxc_set_cpu_type(unsigned int type); extern void mxc_restart(char, const char *); extern void mxc_arch_reset_init(void __iomem *); extern int mx53_revision(void); +extern int imx6q_revision(void); extern int mx53_display_revision(void); extern void imx_set_aips(void __iomem *); extern int mxc_device_init(void); @@ -128,6 +130,13 @@ extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); extern void imx_gpc_pre_suspend(void); extern void imx_gpc_post_resume(void); +extern void imx_gpc_mask_all(void); +extern void imx_gpc_restore_all(void); +extern void imx_anatop_init(void); +extern void imx_anatop_pre_suspend(void); +extern void imx_anatop_post_resume(void); +extern void imx_anatop_usb_chrg_detect_disable(void); +extern u32 imx_anatop_get_digprog(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_set_chicken_bit(void); diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 02b61cdf39b9..44a65e9ff1fc 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -69,6 +69,27 @@ static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on) return 0; } +void imx_gpc_mask_all(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + for (i = 0; i < IMR_NUM; i++) { + gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4); + writel_relaxed(~0, reg_imr1 + i * 4); + } + +} + +void imx_gpc_restore_all(void) +{ + void __iomem *reg_imr1 = gpc_base + GPC_IMR1; + int i; + + for (i = 0; i < IMR_NUM; i++) + writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4); +} + static void imx_gpc_irq_unmask(struct irq_data *d) { void __iomem *reg; diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index a58c8b0527cc..627f16f0e9d1 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -18,13 +18,25 @@ .section ".text.head", "ax" #ifdef CONFIG_SMP +diag_reg_offset: + .word g_diag_reg - . + + .macro set_diag_reg + adr r0, diag_reg_offset + ldr r1, [r0] + add r1, r1, r0 @ r1 = physical &g_diag_reg + ldr r0, [r1] + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register + .endm + ENTRY(v7_secondary_startup) bl v7_invalidate_l1 + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) #endif -#ifdef CONFIG_PM +#ifdef CONFIG_ARM_CPU_SUSPEND /* * The following code must assume it is running from physical address * where absolute virtual addresses to the data section have to be diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 5e91112dcbee..3daf1ed90579 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -11,7 +11,9 @@ */ #include +#include #include +#include #include "common.h" diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c deleted file mode 100644 index e05cf407db65..000000000000 --- a/arch/arm/mach-imx/iram_alloc.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include "linux/platform_data/imx-iram.h" - -static unsigned long iram_phys_base; -static void __iomem *iram_virt_base; -static struct gen_pool *iram_pool; - -static inline void __iomem *iram_phys_to_virt(unsigned long p) -{ - return iram_virt_base + (p - iram_phys_base); -} - -void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr) -{ - if (!iram_pool) - return NULL; - - *dma_addr = gen_pool_alloc(iram_pool, size); - pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr); - if (!*dma_addr) - return NULL; - return iram_phys_to_virt(*dma_addr); -} -EXPORT_SYMBOL(iram_alloc); - -void iram_free(unsigned long addr, unsigned int size) -{ - if (!iram_pool) - return; - - gen_pool_free(iram_pool, addr, size); -} -EXPORT_SYMBOL(iram_free); - -int __init iram_init(unsigned long base, unsigned long size) -{ - iram_phys_base = base; - - iram_pool = gen_pool_create(PAGE_SHIFT, -1); - if (!iram_pool) - return -ENOMEM; - - gen_pool_add(iram_pool, base, size, -1); - iram_virt_base = ioremap(iram_phys_base, size); - if (!iram_virt_base) - return -EIO; - - pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base); - return 0; -} diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 99502eeefdf7..5536fd81379a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -38,38 +38,32 @@ #include "cpuidle.h" #include "hardware.h" -#define IMX6Q_ANALOG_DIGPROG 0x260 +static u32 chip_revision; -static int imx6q_revision(void) +int imx6q_revision(void) { - struct device_node *np; - void __iomem *base; - static u32 rev; + return chip_revision; +} - if (!rev) { - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - if (!np) - return IMX_CHIP_REVISION_UNKNOWN; - base = of_iomap(np, 0); - if (!base) { - of_node_put(np); - return IMX_CHIP_REVISION_UNKNOWN; - } - rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG); - iounmap(base); - of_node_put(np); - } +static void __init imx6q_init_revision(void) +{ + u32 rev = imx_anatop_get_digprog(); switch (rev & 0xff) { case 0: - return IMX_CHIP_REVISION_1_0; + chip_revision = IMX_CHIP_REVISION_1_0; + break; case 1: - return IMX_CHIP_REVISION_1_1; + chip_revision = IMX_CHIP_REVISION_1_1; + break; case 2: - return IMX_CHIP_REVISION_1_2; + chip_revision = IMX_CHIP_REVISION_1_2; + break; default: - return IMX_CHIP_REVISION_UNKNOWN; + chip_revision = IMX_CHIP_REVISION_UNKNOWN; } + + mxc_set_cpu_type(rev >> 16 & 0xff); } static void imx6q_restart(char mode, const char *cmd) @@ -164,29 +158,7 @@ static void __init imx6q_1588_init(void) } static void __init imx6q_usb_init(void) { - struct regmap *anatop; - -#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 -#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 - -#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 -#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 - - anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); - if (!IS_ERR(anatop)) { - /* - * The external charger detector needs to be disabled, - * or the signal at DP will be poor - */ - regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B - | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); - regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B | - BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); - } else { - pr_warn("failed to find fsl,imx6q-anatop regmap\n"); - } + imx_anatop_usb_chrg_detect_disable(); } static void __init imx6q_init_machine(void) @@ -196,6 +168,7 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + imx_anatop_init(); imx6q_pm_init(); imx6q_usb_init(); imx6q_1588_init(); @@ -282,6 +255,7 @@ static void __init imx6q_map_io(void) static void __init imx6q_init_irq(void) { + imx6q_init_revision(); l2x0_of_init(0, ~0UL); imx_src_init(); imx_gpc_init(); @@ -292,15 +266,17 @@ static void __init imx6q_timer_init(void) { mx6q_clocks_init(); clocksource_of_init(); - imx_print_silicon_rev("i.MX6Q", imx6q_revision()); + imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q", + imx6q_revision()); } static const char *imx6q_dt_compat[] __initdata = { + "fsl,imx6dl", "fsl,imx6q", NULL, }; -DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") +DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 7a146671e65a..3c609c52d3eb 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -51,6 +51,8 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { + mxc_device_init(); + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, MX1_GPIO_INT_PORTA, 0); mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 7dce17a9fe6c..8629e5be7ecd 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -34,6 +34,8 @@ #define MXC_CPU_MX35 35 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 +#define MXC_CPU_IMX6DL 0x61 +#define MXC_CPU_IMX6Q 0x63 #define IMX_CHIP_REVISION_1_0 0x10 #define IMX_CHIP_REVISION_1_1 0x11 @@ -150,6 +152,15 @@ extern unsigned int __mxc_cpu_type; #endif #ifndef __ASSEMBLY__ +static inline bool cpu_is_imx6dl(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6DL; +} + +static inline bool cpu_is_imx6q(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6Q; +} struct cpu_op { u32 cpu_rate; diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 77e9a25ed0f6..c6e1ab544882 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -21,6 +22,7 @@ #define SCU_STANDBY_ENABLE (1 << 5) +u32 g_diag_reg; static void __iomem *scu_base; static struct map_desc scu_io_desc __initdata = { @@ -68,8 +70,8 @@ static void __init imx_smp_init_cpus(void) ncores = scu_get_core_count(scu_base); - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); + for (i = ncores; i < NR_CPUS; i++) + set_cpu_possible(i, false); } void imx_smp_prepare(void) @@ -80,6 +82,18 @@ void imx_smp_prepare(void) static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); + + /* + * The diagnostic register holds the errata bits. Mostly bootloader + * does not bring up secondary cores, so that when errata bits are set + * in bootloader, they are set only for boot cpu. But on a SMP + * configuration, it should be equally done on every single core. + * Read the register from boot cpu here, and will replicate it into + * secondary cores when booting them. + */ + asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc"); + __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg)); + outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1)); } struct smp_operations imx_smp_ops __initdata = { diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c index 5faba7a3c95f..204942749e21 100644 --- a/arch/arm/mach-imx/pm-imx6q.c +++ b/arch/arm/mach-imx/pm-imx6q.c @@ -1,5 +1,5 @@ /* - * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011-2013 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * * The code contained herein is licensed under the GNU General Public @@ -34,10 +34,12 @@ static int imx6q_pm_enter(suspend_state_t state) case PM_SUSPEND_MEM: imx6q_set_lpm(STOP_POWER_OFF); imx_gpc_pre_suspend(); + imx_anatop_pre_suspend(); imx_set_cpu_jump(0, v7_cpu_resume); /* Zzz ... */ cpu_suspend(0, imx6q_suspend_finish); imx_smp_prepare(); + imx_anatop_post_resume(); imx_gpc_post_resume(); imx6q_set_lpm(WAIT_CLOCKED); break; diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 97d086889481..10a6b1a8c5ac 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include "common.h" @@ -21,10 +22,65 @@ #define SRC_SCR 0x000 #define SRC_GPR1 0x020 #define BP_SRC_SCR_WARM_RESET_ENABLE 0 +#define BP_SRC_SCR_SW_GPU_RST 1 +#define BP_SRC_SCR_SW_VPU_RST 2 +#define BP_SRC_SCR_SW_IPU1_RST 3 +#define BP_SRC_SCR_SW_OPEN_VG_RST 4 +#define BP_SRC_SCR_SW_IPU2_RST 12 #define BP_SRC_SCR_CORE1_RST 14 #define BP_SRC_SCR_CORE1_ENABLE 22 static void __iomem *src_base; +static DEFINE_SPINLOCK(scr_lock); + +static const int sw_reset_bits[5] = { + BP_SRC_SCR_SW_GPU_RST, + BP_SRC_SCR_SW_VPU_RST, + BP_SRC_SCR_SW_IPU1_RST, + BP_SRC_SCR_SW_OPEN_VG_RST, + BP_SRC_SCR_SW_IPU2_RST +}; + +static int imx_src_reset_module(struct reset_controller_dev *rcdev, + unsigned long sw_reset_idx) +{ + unsigned long timeout; + unsigned long flags; + int bit; + u32 val; + + if (!src_base) + return -ENODEV; + + if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits)) + return -EINVAL; + + bit = 1 << sw_reset_bits[sw_reset_idx]; + + spin_lock_irqsave(&scr_lock, flags); + val = readl_relaxed(src_base + SRC_SCR); + val |= bit; + writel_relaxed(val, src_base + SRC_SCR); + spin_unlock_irqrestore(&scr_lock, flags); + + timeout = jiffies + msecs_to_jiffies(1000); + while (readl(src_base + SRC_SCR) & bit) { + if (time_after(jiffies, timeout)) + return -ETIME; + cpu_relax(); + } + + return 0; +} + +static struct reset_control_ops imx_src_ops = { + .reset = imx_src_reset_module, +}; + +static struct reset_controller_dev imx_reset_controller = { + .ops = &imx_src_ops, + .nr_resets = ARRAY_SIZE(sw_reset_bits), +}; void imx_enable_cpu(int cpu, bool enable) { @@ -32,9 +88,11 @@ void imx_enable_cpu(int cpu, bool enable) cpu = cpu_logical_map(cpu); mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val = enable ? val | mask : val & ~mask; writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); } void imx_set_cpu_jump(int cpu, void *jump_addr) @@ -61,9 +119,11 @@ void imx_src_prepare_restart(void) u32 val; /* clear enable bits of secondary cores */ + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE); writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); /* clear persistent entry register of primary core */ writel_relaxed(0, src_base + SRC_GPR1); @@ -80,11 +140,17 @@ void __init imx_src_init(void) src_base = of_iomap(np, 0); WARN_ON(!src_base); + imx_reset_controller.of_node = np; + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + reset_controller_register(&imx_reset_controller); + /* * force warm reset sources to generate cold reset * for a more reliable restart */ + spin_lock(&scr_lock); val = readl_relaxed(src_base + SRC_SCR); val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE); writel_relaxed(val, src_base + SRC_SCR); + spin_unlock(&scr_lock); } diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index da1091be0887..8c60fcb08a98 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -250,39 +250,6 @@ static void __init intcp_init_early(void) } #ifdef CONFIG_OF - -static void __init cp_of_timer_init(void) -{ - struct device_node *node; - const char *path; - void __iomem *base; - int err; - int irq; - - err = of_property_read_string(of_aliases, - "arm,timer-primary", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - base = of_iomap(node, 0); - if (WARN_ON(!base)) - return; - writel(0, base + TIMER_CTRL); - sp804_clocksource_init(base, node->name); - - err = of_property_read_string(of_aliases, - "arm,timer-secondary", &path); - if (WARN_ON(err)) - return; - node = of_find_node_by_path(path); - base = of_iomap(node, 0); - if (WARN_ON(!base)) - return; - irq = irq_of_parse_and_map(node, 0); - writel(0, base + TIMER_CTRL); - sp804_clockevents_init(base, irq, node->name); -} - static const struct of_device_id fpga_irq_of_match[] __initconst = { { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, { /* Sentinel */ } @@ -383,7 +350,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .handle_irq = fpga_handle_irq, - .init_time = cp_of_timer_init, .init_machine = intcp_init_of, .restart = integrator_restart, .dt_compat = intcp_dt_board_compat, diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index cdbca328a412..e1f3735d3415 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o mpp.o +obj-y += common.o irq.o pcie.o mpp.o obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c deleted file mode 100644 index 8f0d162a1e1d..000000000000 --- a/arch/arm/mach-kirkwood/addr-map.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/arm/mach-kirkwood/addr-map.c - * - * Address map functions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DEV_BUS 1 -#define TARGET_SRAM 3 -#define TARGET_PCIE 4 -#define ATTR_DEV_SPI_ROM 0x1e -#define ATTR_DEV_BOOT 0x1d -#define ATTR_DEV_NAND 0x2f -#define ATTR_DEV_CS3 0x37 -#define ATTR_DEV_CS2 0x3b -#define ATTR_DEV_CS1 0x3d -#define ATTR_DEV_CS0 0x3e -#define ATTR_PCIE_IO 0xe0 -#define ATTR_PCIE_MEM 0xe8 -#define ATTR_PCIE1_IO 0xd0 -#define ATTR_PCIE1_MEM 0xd8 -#define ATTR_SRAM 0x01 - -/* - * Description of the windows needed by the platform code - */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { - .num_wins = 8, - .remappable_wins = 4, - .bridge_virt_base = BRIDGE_VIRT_BASE, -}; - -static const struct __initdata orion_addr_map_info addr_map_info[] = { - /* - * Windows for PCIe IO+MEM space. - */ - { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, - TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE - }, - { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE - }, - { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE, - TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE - }, - { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE - }, - /* - * Window for NAND controller. - */ - { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE, - TARGET_DEV_BUS, ATTR_DEV_NAND, -1 - }, - /* - * Window for SRAM. - */ - { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE, - TARGET_SRAM, ATTR_SRAM, -1 - }, - /* End marker */ - { -1, 0, 0, 0, 0, 0 } -}; - -void __init kirkwood_setup_cpu_mbus(void) -{ - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, addr_map_info); - - /* - * Setup MBUS dram target info. - */ - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) DDR_WINDOW_CPU_BASE); -} diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 7904758e771f..e9647b80cb59 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -93,7 +93,7 @@ static void __init kirkwood_dt_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - kirkwood_setup_cpu_mbus(); + kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 49792a0cd2d3..f38922897563 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include "common.h" @@ -529,12 +528,9 @@ void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); - /* - * Some Kirkwood devices allocate their coherent buffers from atomic - * context. Increase size of atomic coherent pool to make sure such - * the allocations won't fail. - */ - init_dma_coherent_pool_size(SZ_1M); + mvebu_mbus_init("marvell,kirkwood-mbus", + BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ); } int kirkwood_tclk; @@ -650,6 +646,38 @@ char * __init kirkwood_id(void) } } +void __init kirkwood_setup_wins(void) +{ + /* + * The PCIe windows will no longer be statically allocated + * here once Kirkwood is migrated to the pci-mvebu driver. + */ + mvebu_mbus_add_window_remap_flags("pcie0.0", + KIRKWOOD_PCIE_IO_PHYS_BASE, + KIRKWOOD_PCIE_IO_SIZE, + KIRKWOOD_PCIE_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie0.0", + KIRKWOOD_PCIE_MEM_PHYS_BASE, + KIRKWOOD_PCIE_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE1_IO_PHYS_BASE, + KIRKWOOD_PCIE1_IO_SIZE, + KIRKWOOD_PCIE1_IO_BUS_BASE, + MVEBU_MBUS_PCI_IO); + mvebu_mbus_add_window_remap_flags("pcie1.0", + KIRKWOOD_PCIE1_MEM_PHYS_BASE, + KIRKWOOD_PCIE1_MEM_SIZE, + MVEBU_MBUS_NO_REMAP, + MVEBU_MBUS_PCI_MEM); + mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE, + KIRKWOOD_NAND_MEM_SIZE); + mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE, + KIRKWOOD_SRAM_SIZE); +} + void __init kirkwood_l2_init(void) { #ifdef CONFIG_CACHE_FEROCEON_L2 @@ -675,7 +703,7 @@ void __init kirkwood_init(void) */ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); - kirkwood_setup_cpu_mbus(); + kirkwood_setup_wins(); kirkwood_l2_init(); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 3147be2f34da..21da3b1ebd7b 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -30,7 +30,7 @@ void kirkwood_init(void); void kirkwood_init_early(void); void kirkwood_init_irq(void); -void kirkwood_setup_cpu_mbus(void); +void kirkwood_setup_wins(void); void kirkwood_enable_pcie(void); void kirkwood_pcie_id(u32 *dev, u32 *rev); diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index a05563a31c95..92976cef3910 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -60,8 +60,9 @@ * Register Map */ #define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) -#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500) +#define DDR_WINDOW_CPU_SZ (0x20) #define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) #define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) @@ -80,6 +81,8 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) #define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) +#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE) +#define BRIDGE_WINS_SZ (0x80) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index d96ad4c09972..7f43e6c2f8c0 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -17,7 +17,6 @@ #include #include #include -#include #include "common.h" static void kirkwood_enable_pcie_clk(const char *port) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 283abff90228..e1267d6b468f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -124,7 +124,7 @@ static void __init qnap_ts219_init(void) static int __init ts219_pci_init(void) { if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); + kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0); return 0; } diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c index 7777767ee89a..9c392a29fc7e 100644 --- a/arch/arm/mach-msm/last_radio_log.c +++ b/arch/arm/mach-msm/last_radio_log.c @@ -66,6 +66,6 @@ void msm_init_last_radio_log(struct module *owner) pr_err("%s: last radio log is %d bytes long\n", __func__, radio_log_size); last_radio_log_fops.owner = owner; - entry->size = radio_log_size; + proc_set_size(entry, radio_log_size); } EXPORT_SYMBOL(msm_init_last_radio_log); diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile index 67a13f9bfe64..7cd04634d302 100644 --- a/arch/arm/mach-mv78xx0/Makefile +++ b/arch/arm/mach-mv78xx0/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o mpp.o irq.o pcie.o +obj-y += common.o mpp.o irq.o pcie.o obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c deleted file mode 100644 index 26e9876b50e9..000000000000 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * arch/arm/mach-mv78xx0/addr-map.c - * - * Address map functions for Marvell MV78xx0 SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DEV_BUS 1 -#define TARGET_PCIE0 4 -#define TARGET_PCIE1 8 -#define TARGET_PCIE(i) ((i) ? TARGET_PCIE1 : TARGET_PCIE0) -#define ATTR_DEV_SPI_ROM 0x1f -#define ATTR_DEV_BOOT 0x2f -#define ATTR_DEV_CS3 0x37 -#define ATTR_DEV_CS2 0x3b -#define ATTR_DEV_CS1 0x3d -#define ATTR_DEV_CS0 0x3e -#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l))) -#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l))) - -/* - * CPU Address Decode Windows registers - */ -#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) -#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) - -static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) -{ - /* - * Find the control register base address for this window. - * - * BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's) - * MBUS bridge depending on which CPU core we're running on, - * so we don't need to take that into account here. - */ - - return (win < 8) ? WIN0_OFF(win) : WIN8_OFF(win); -} - -/* - * Description of the windows needed by the platform code - */ -static struct orion_addr_map_cfg addr_map_cfg __initdata = { - .num_wins = 14, - .remappable_wins = 8, - .win_cfg_base = win_cfg_base, -}; - -void __init mv78xx0_setup_cpu_mbus(void) -{ - /* - * Disable, clear and configure windows. - */ - orion_config_wins(&addr_map_cfg, NULL); - - /* - * Setup MBUS dram target info. - */ - if (mv78xx0_core_index() == 0) - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) DDR_WINDOW_CPU0_BASE); - else - orion_setup_cpu_mbus_target(&addr_map_cfg, - (void __iomem *) DDR_WINDOW_CPU1_BASE); -} - -void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size, - int maj, int min) -{ - orion_setup_cpu_win(&addr_map_cfg, window, base, size, - TARGET_PCIE(maj), ATTR_PCIE_IO(min), 0); -} - -void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size, - int maj, int min) -{ - orion_setup_cpu_win(&addr_map_cfg, window, base, size, - TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1); -} diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0efa14498ebc..749a7f8c4992 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -334,6 +334,14 @@ void __init mv78xx0_uart3_init(void) void __init mv78xx0_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + if (mv78xx0_core_index() == 0) + mvebu_mbus_init("marvell,mv78xx0-mbus", + BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ); + else + mvebu_mbus_init("marvell,mv78xx0-mbus", + BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ, + DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); } void __init_refok mv78xx0_timer_init(void) @@ -397,8 +405,6 @@ void __init mv78xx0_init(void) printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000); printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); - mv78xx0_setup_cpu_mbus(); - #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_l2_init(is_l2_writethrough()); #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 46200a183cf2..723748d8ba7d 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -60,13 +60,18 @@ */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) #define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) +#define BRIDGE_WINS_CPU0_BASE (MV78XX0_CORE0_REGS_PHYS_BASE) +#define BRIDGE_WINS_CPU1_BASE (MV78XX0_CORE1_REGS_PHYS_BASE) +#define BRIDGE_WINS_SZ (0xA000) /* * Register Map */ #define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE + 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE + 0x1570) +#define DDR_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x00000) +#define DDR_WINDOW_CPU0_BASE (DDR_PHYS_BASE + 0x1500) +#define DDR_WINDOW_CPU1_BASE (DDR_PHYS_BASE + 0x1570) +#define DDR_WINDOW_CPU_SZ (0x20) #define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE + 0x10000) #define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE + 0x10000) diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index ee8c0b51df2c..dc26a654c496 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -10,11 +10,11 @@ #include #include +#include #include