diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 92e1dc94ecc8..73f62caa8609 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,59 +2,15 @@
 # USB device configuration
 #
 
-# many non-PCI SOC chips embed OHCI
+# These are unused now, remove them once they are no longer selected
 config USB_ARCH_HAS_OHCI
-	boolean
-	# ARM:
-	default y if SA1111
-	default y if ARCH_OMAP
-	default y if ARCH_S3C24XX
-	default y if PXA27x
-	default y if PXA3xx
-	default y if ARCH_EP93XX
-	default y if ARCH_AT91
-	default y if MFD_TC6393XB
-	default y if ARCH_W90X900
-	default y if ARCH_DAVINCI_DA8XX
-	default y if ARCH_CNS3XXX
-	default y if PLAT_SPEAR
-	default y if ARCH_EXYNOS
-	# PPC:
-	default y if STB03xxx
-	default y if PPC_MPC52xx
-	# MIPS:
-	default y if MIPS_ALCHEMY
-	default y if MACH_JZ4740
-	# more:
-	default PCI
+	bool
 
-# some non-PCI hcds implement EHCI
 config USB_ARCH_HAS_EHCI
-	boolean
-	default y if FSL_SOC
-	default y if PPC_MPC512x
-	default y if ARCH_IXP4XX
-	default y if ARCH_W90X900
-	default y if ARCH_AT91
-	default y if ARCH_MXC
-	default y if ARCH_MXS
-	default y if ARCH_OMAP3
-	default y if ARCH_CNS3XXX
-	default y if ARCH_VT8500
-	default y if PLAT_SPEAR
-	default y if PLAT_S5P
-	default y if ARCH_MSM
-	default y if MICROBLAZE
-	default y if SPARC_LEON
-	default y if ARCH_MMP
-	default y if MACH_LOONGSON1
-	default y if PLAT_ORION
-	default PCI
+	bool
 
-# some non-PCI HCDs implement xHCI
 config USB_ARCH_HAS_XHCI
-	boolean
-	default PCI
+	bool
 
 menuconfig USB_SUPPORT
 	bool "USB support"
@@ -71,19 +27,8 @@ config USB_COMMON
 	default y
 	depends on USB || USB_GADGET
 
-# Host-side USB depends on having a host controller
-# NOTE:  dummy_hcd is always an option, but it's ignored here ...
-# NOTE:  SL-811 option should be board-specific ...
 config USB_ARCH_HAS_HCD
-	boolean
-	default y if USB_ARCH_HAS_OHCI
-	default y if USB_ARCH_HAS_EHCI
-	default y if USB_ARCH_HAS_XHCI
-	default y if PCMCIA && !M32R			# sl811_cs
-	default y if ARM				# SL-811
-	default y if BLACKFIN				# SL-811
-	default y if SUPERH				# r8a66597-hcd
-	default PCI
+	def_bool y
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
 config USB
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d61a026b9248..881609ef85e8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -17,7 +17,6 @@ config USB_C67X00_HCD
 
 config USB_XHCI_HCD
 	tristate "xHCI HCD (USB 3.0) support"
-	depends on USB_ARCH_HAS_XHCI
 	---help---
 	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
 	  "SuperSpeed" host controller hardware.
@@ -43,7 +42,6 @@ endif # USB_XHCI_HCD
 
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
-	depends on USB_ARCH_HAS_EHCI
 	---help---
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
@@ -358,7 +356,6 @@ config USB_FUSBH200_HCD
 
 config USB_OHCI_HCD
 	tristate "OHCI HCD (USB 1.1) support"
-	depends on USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
 	depends on USB_ISP1301 || !ARCH_LPC32XX
 	---help---