Commit graph

106 commits

Author SHA1 Message Date
Alan Stern
014e73c99a [PATCH] USB UHCI: subroutine reordering
This patch moves a few subroutines around in the uhci-hcd source file.
Nothing else is changed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:42 -07:00
David Brownell
72ebddb59a [PATCH] USB: turn a user mode driver error into a hard error
This patch turns a user mode driver error into a hard error, and updates
the relevant diagnostic slightly to help troubleshooting.  gphoto was
known to have this problem, hopefully it is now fixed (they have had
plenty of warning...)

This had been left as a soft error to give various user mode drivers a
change to be properly fixed, with the statement that starting in about
2.6.10 it would be changed.  It had been mostly safe as a soft error ...
but that can not be guaranteed.  Now that a year has passed, it's time to
really insist that the user mode drivers finally fix their relevant bugs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:42 -07:00
Olav Kongas
589a0083a3 [PATCH] USB: Fix oops at rmmod after failed probe in isp116x-hcd
This patch fixes an oops triggered at rmmod of isp116x-hcd
after the probe() has failed.

Also, it extends the error message printed, if the driver
cannot detect "Chip's Clock Ready" after a software reset.
As Ian Campbell recently reported, this happens if the
chip's H_WAKEUP pin is not pulled low during software reset.
Several people have already had this issue, hence the update
to the error message.

Also, extend the error message about the failed clock
detection after the software reset.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
2005-06-27 14:43:42 -07:00
Olav Kongas
4808a1c026 [PATCH] USB: Add isp116x-hcd USB host controller driver
This patch provides an "isp116x-hcd" driver for Philips'
ISP1160/ISP1161 USB host controllers.

The driver:
 - is relatively small, meant for use on embedded platforms.
 - runs usbtests 1-14 without problems for days.
 - has been in use by 6-7 different people on ARM and PPC platforms,
   running a range of devices including USB hubs.
 - supports suspend/resume of both the platform device and the root hub;
   supports remote wakeup of the root hub (but NOT the platform device)
   by USB devices.
 - does NOT support ISO transfers (nobody has asked for them).
 - is PIO-only.

Signed-off-by: Olav Kongas <ok@artecdesign.ee>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:42 -07:00
David Brownell
313980c927 [PATCH] USB: omap_udc updates (mostly cleanups)
Various USB patches, mostly for portability:

  - Fifo mode 1 didn't work previously (oopsed), so now it's fixed and
    (why not) defines even more endpoints for composite devices.

  - OMAP 1710 doesn't have an internal transceiver.

  - Small PM update:  if the USB link is suspended, don't disconnect on
    entry to deep sleep.

  - Be more correct about handling zero length control reads.  OMAP
    seems to mis-handle that protocol peculiarity though; best avoided.

  - Platform device resources (for UDC and OTG controllers) now use
    physical addresses, so /proc/iomem is more consistent.

  - Minor cleanups, notably (by volume) for "sparse" NULL warnings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2005-06-27 14:43:41 -07:00
Alan Stern
d794ac7ae3 [PATCH] USB: g_file_storage: export "stall" parameter
This patch changes the g_file_storage driver to make the "stall" module
parameter generally available; currently it is available only if the
testing version of the module has been configured.  It also fixes a typo
in a comment -- thanks, Pat!

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:40 -07:00
Alan Stern
76f4af8efc [PATCH] USB: g_file_storage: Consolidate min()s
This patch simplifies the g_file_storage driver by consolidating a bunch
of min() calculations at a single spot.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27 14:43:40 -07:00
Christoph Lameter
3e1d1d28d9 [PATCH] Cleanup patch for process freezing
1. Establish a simple API for process freezing defined in linux/include/sched.h:

   frozen(process)		Check for frozen process
   freezing(process)		Check if a process is being frozen
   freeze(process)		Tell a process to freeze (go to refrigerator)
   thaw_process(process)	Restart process
   frozen_process(process)	Process is frozen now

2. Remove all references to PF_FREEZE and PF_FROZEN from all
   kernel sources except sched.h

3. Fix numerous locations where try_to_freeze is manually done by a driver

4. Remove the argument that is no longer necessary from two function calls.

5. Some whitespace cleanup

6. Clear potential race in refrigerator (provides an open window of PF_FREEZE
   cleared before setting PF_FROZEN, recalc_sigpending does not check
   PF_FROZEN).

This patch does not address the problem of freeze_processes() violating the rule
that a task may only modify its own flags by setting PF_FREEZE. This is not clean
in an SMP environment. freeze(process) is therefore not SMP safe!

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 17:10:13 -07:00
Adrian Bunk
4749f32da9 [PATCH] better USB_MON dependencies
This makes the USB_MON less confusing.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 10:04:15 -07:00
Andrew Morton
790a19cd57 [PATCH] pwc-uncompress warning fix
drivers/usb/media/pwc/pwc-uncompress.c: In function `pwc_decompress':
drivers/usb/media/pwc/pwc-uncompress.c:140: warning: unreachable code at beginning of switch statement

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:35 -07:00
Christoph Hellwig
5f45f1a78f [PATCH] remove duplicate get_dentry functions in various places
Various filesystem drivers have grown a get_dentry() function that's a
duplicate of lookup_one_len, except that it doesn't take a maximum length
argument and doesn't check for \0 or / in the passed in filename.

Switch all these places to use lookup_one_len.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:20 -07:00
Stelian Pop
479f6ea85e [PATCH] USB: fix hid core to return proper error code from probe
Drivers need to return -ENODEV when they can't bind to a device.
Anything else stops the "bind a device to a driver" search.

From: Stelian Pop <stelian@popies.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-22 23:01:09 -07:00
Greg Kroah-Hartman
4893e9d1cf [PATCH] USB: fix show_modalias() function due to attribute change
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:27:35 -07:00
Yani Ioannou
060b8845e6 [PATCH] Driver Core: drivers/usb/input/aiptek.c - drivers/zorro/zorro-sysfs.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
Yani Ioannou
10523b3b82 [PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00
Alan Stern
f409661877 [PATCH] usbcore: Don't call device_release_driver recursively
This patch fixes usb_driver_release_interface() to make it avoid calling
device_release_driver() recursively, i.e., when invoked from within the
disconnect routine for the same device.  The patch applies to your
"driver" tree.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:29 -07:00
Patrick Mochel
273971bade [PATCH] usb: klist_node_attached() fix
The original code looks like this:

        /* if interface was already added, bind now; else let
         * the future device_add() bind it, bypassing probe()
         */
        if (!list_empty (&dev->bus_list))
                device_bind_driver(dev);

IOW, it's checking to see if the device is attached to the bus or not
and binding the driver if it is. It's checking the device's bus list,
which will only appear empty when the device has been initialized, but
not added. It depends way too much on the driver model internals, but it
seems to be the only way to do the weird crap they want to do with
interfaces.

When I converted it to use klists, I accidentally inverted the logic,
which led to bad things happening. This patch returns the check to its
orginal value.

From: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:28 -07:00
gregkh@suse.de
ff710710ea [PATCH] USB: fix build warning in usb core as pointed out by Andrew.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:26 -07:00
mochel@digitalimplant.org
d4a7537122 [PATCH] Fix up USB to use klist_node_attached() instead of list_empty() on lists that will go away.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:17 -07:00
mochel@digitalimplant.org
6034a080f9 [PATCH] Use driver_for_each_device() instead of manually walking list.
Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/usb/core/usb.c
===================================================================
2005-06-20 15:15:13 -07:00
Mark M. Hoffman
5cebfb759c [PATCH] USB: trivial error path fix
Trivial fix to USB class-creation error path; please apply.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:09 -07:00
gregkh@suse.de
56b2293595 [PATCH] class: convert drivers/* to use the new class api instead of class_simple
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:09 -07:00
gregkh@suse.de
8561b10f6e [PATCH] USB: move the usb hcd code to use the new class code.
This moves a kref into the main hcd structure, which detaches it from
the class device structure.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:07 -07:00
Dmitry Torokhov
8d790d7408 [PATCH] make driver's name be const char *
Driver core:
  change driver's, bus's, class's and platform device's names
  to be const char * so one can use
            const char *drv_name = "asdfg";
  when initializing structures.
  Also kill couple of whitespaces.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:01 -07:00
James Bottomley
3237ee78fc merge by hand (fix up qla_os.c merge error) 2005-06-17 18:42:23 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
Oliver Neukum
58125f95c6 [PATCH] fix for kaweth broken by changes in the networking layer
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-16 09:02:59 -07:00
David Brownell
c22fa3acbc [PATCH] spin longer for ehci port reset completion
This makes the EHCI driver spin a bit longer before concluding that the
port reset failed.  "Obviously safe."

It allows some devices to enumerate that previously didn't.  We've seen
a bunch of these problem reports recently, this will make some go away.

As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI
controllers seem to take forever to finish port resets and produce
"port N reset error -110" type errors.  Spinning a bit longer helps.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13 08:20:41 -07:00
Alan Cox
c0105338eb [PATCH] pwc bug fix
The pwc chainsaw session left some setups not working.  There is a
sanity check on compression buffers that simply isn't right any more as
we never allocate one.

This doesn't address the email and other changes.  I'll do those
tomorrow if I get time, but it is the minimal fix for the code and basic
feature set.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-12 21:05:57 -07:00
Ian Abbott
76854ceac3 [PATCH] USB: ftdi_sio: avoid losing received data in tty-ldisc
ftdi_sio: Avoid losing bytes at tty-ldisc.

This patch was originally developed by Daniel Smertnig.  I
(Ian Abbott) made a few changes.  It has been tested by both
Daniel and I, at least for raw, non-canonical receive data
processing.

Here is Daniel's original description of the patch:

===
During a project in which I was using a FTDI 232BM to
transmit data at relative high speeds (625kBit/s), I
noticed a problem where data was lost even if flow
control was enabled: The FTDI-Driver receives 512 Bytes
of data over USB at a time, which consists of 8 64-Byte
packets. Subtracting the 2 bytes of status information
included in each packet this gives 496 "real" data
bytes per read.

This data is passed (indirectly, via the flip buffers)
to the tty line discipline which takes care of
throttling when there the free buffer space reaches
TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver
processes up to 496 bytes at a time, throttling won't
happen in time and the line discipline will discard the
remaining bytes.

To avoid this the patch passes data in 62-byte blocks
to the tty layer and checks the available space in the
ldisc-buffers. If there isn't enough free space,
processing the rest of the data is delayed using a
workqueue.

Note: The original problem should be easily
reproducible with a userspace program which does slow &
small reads.
===

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-09 01:38:15 -07:00
David Brownell
f4d340cf86 [PATCH] USB: resolve Zaurus problem
This "obvious" one-liner is needed to recognize Zaurus SL 6000;
it just checks two GUIDs not just one.

OSDL bugids #4512 and #4545 seem to be duplicates of this report.

From: Gerald Skerbitz <gsker@tcfreenet.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:16:17 -07:00
Craig Shelley
39a66b8d22 [PATCH] USB: CP2101 Add support for flow control
Added support to get/set flow control line levels using TIOCMGET and
TIOCMSET.
Added support for RTSCTS hardware flow control.
cp2101_get_config and cp2101_set_config modified to support long request
strings, required for configuring flow control.

Signed-off-by: Craig Shelley craig@microtron.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:30 -07:00
Phil Dibowitz
1724757e5a [PATCH] USB Storage: Add unusual_devs for Trumpion Voice Recorder
The original entry of this patch was submitted by Filippo Bardelli
<filibard@libero.it>, with cleanups and patch-ification by me.

This corrects the subclass that the device reports.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:30 -07:00
Paulo Marques
77ddecc3c0 [PATCH] USB: make MODALIAS code a bit smaller devices
This patch makes the code to provide modalias in sysfs for usb devices
56 bytes smaller in i386, while making it clear that the first part of
the modalias string is the same no matter what the device class is.

Signed-Off-By: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:29 -07:00
Matthias Urlichs
58cfe9113e [PATCH] USB: add Option Card driver
This patch adds a new driver for "Option" cards.  This is a GSM data card,
controlled by three "serial ports" which are connected via an OHCI adapter,
all located on an oversized PC-Card.  It's sold by several GSM service
providers.

Traditionally, this card has been accessed via the standard serial driver
and appropriate vendor= and product= options.  However, testing has
revealed several problems with this approach, including hung data transfers
and lost data blocks when receiving.

Therefore, I've written a separate driver.

Signed-off-by: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:29 -07:00
Greg Kroah-Hartman
4871d3be13 [PATCH] USB: add Vernier devices to HID blacklist
They aren't really HID devices.

Damm microsoft HID driver, that thing has caused more companies to have
to do this kind of hack...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:29 -07:00
Lonnie Mendez
dc1d1003e8 [PATCH] USB: hid-core: add Earthmate lt-20 productid to blacklist table
This patch adds the DeLorme Earthmate lt-20 productid to the hid
blacklist table.  This patch ensures the lt-20 can be claimed by the
appropriate driver (cypress_m8).

Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid
blacklist table.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:28 -07:00
Ping Cheng
5ce0482e18 [PATCH] USB: add new wacom device to usb hid-core list
- add Intuos3 and Cintiq 21UX

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:28 -07:00
Adrian Bunk
d7771a33bf [PATCH] USB: remove drivers/usb/media/pwc/ChangeLog
This patch removes the outdated ChangeLog file for this driver.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-03 00:04:28 -07:00
Greg Kroah-Hartman
06299db3e7 [PATCH] USB: fix usb-serial generic initialization
At module load time, if a generic device is found, the tty information
for the device is not set up properly (as the tty structures aren't initialized
yet.)  This can cause big problems for things like udev.  This patch fixes this.

Thanks to Kay Sievers for the original patch for this problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:59 -07:00
Ian Abbott
47900743a5 [PATCH] USB: ftdi_sio: new PID for ELV UM100
ftdi_sio: Add PID for "ELV USB Module UM100".
PID sent by Armin Laugher.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:59 -07:00
David Brownell
c6de2b64eb [PATCH] USB: add sl811_cs support
This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by
wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver.

This CF card is especially useful for PDAs, which currently tend to have
no other solution for USB host capability.

From: Botond Botyanszki <boti@rocketmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:58 -07:00
David Brownell
1e9a47b62f [PATCH] USB: sl811-hcd fixes
Various fixes to the sl811-hcd driver:

  * Fix small glitches that crept in during recent evolution of usbcore's hcd
    glue layer, coupling endpoint state records to usbcore and active urbs.
    (As noted by folk whose boards weren't stuck on 2.6.9 kernels...)

  * Cope with various system-specific issues:
      - Some configurations (e.g. a CF-card uses this chip) have iospace
        addresses for the two registers, rather than memory mapped ones.
      - Some configurations do interesting things with IRQs; maybe the
        line is shared, or it doesn't support level triggering.
      - Not all boards can drive the chip reset line in software.

  * Address a potential race during unlinking.

  * Tweak probe/remove section info to handle the case where this segment
    of a platform bus is hotpluggable (e.g. CF card).  (The basic problem
    is that CONFIG_HOTPLUG is global, which is wrong since not all busses
    can hotplug even on hotplug-friendly systems...)  Also export the
    driver, so that the CF driver can depend on it.

Also removed some annoying end-of-line whitespace.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31 14:13:58 -07:00
Dave Jones
dcefb396c2 [PATCH] Fix up pwc driver compilation.
The neutering of the pwc driver was incomplete. It still references
some now-dead files..

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 10:36:27 -07:00
Alan Cox
88c1834633 [PATCH] remove non-cleanroom pwc driver compression
The original pwc author raised some questions about the reverse
engineering of the decompressor algorithms used in the pwc driver.
Having done some detailed investigation it appears those concerns that
clean room policy was not followed are reasonable.  I've also had a
friendly discussion with Philips to ask their view on this.

This removes the problem items of code which reduces the pwc
functionality in the kernel a little but leaves all the framework for
setup that will be needed for decompressors in user space (where they
eventually belong).  This change set is designed to be the minimal risk
change set given that 2.6.12 is hopefully close to hand, with a view to
merging the much updated pwc code in 2.6.13 series kernels.

Someone else can then redo the decompressors properly (clean room) in
user space.

Note that while its easy to say that it should have been caught earlier,
but the violation was really only obvious to someone who had access to
both the proprietary source and the 'GPL' source.
2005-05-27 07:45:21 -07:00
David Woodhouse
0e15850200 [PATCH] Speedtouch resync after lost signal.
There's a bigger Speedtouch update coming your way after 2.6.12 but in
the meantime, let's at least make it automatically resync if the DSL
signal is lost.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-25 10:13:43 -07:00
Greg KH
360b52b089 [PATCH] USB: add modalias sysfs file for usb devices
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-16 21:44:26 -07:00
Lonnie Mendez
25b6f08e3f [PATCH] USB: cypress_m8: add support for the DeLorme Earthmate lt-20
This patch adds support for the DeLorme Earthmate lt-20 to the
cypress_m8 driver.  The device was tested and found to be compatible
with the cypress_m8 driver.  This is a resend with the complete patch
which properly compiles.

Adds support for the DeLorme Earthmate lt-20 to the cypress_m8 driver.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-16 21:44:26 -07:00