Commit graph

47 commits

Author SHA1 Message Date
Al Viro
bd1c149aa9 Introduce [compat_]save_altstack_ex() to unbreak x86 SMAP
For performance reasons, when SMAP is in use, SMAP is left open for an
entire put_user_try { ... } put_user_catch(); block, however, calling
__put_user() in the middle of that block will close SMAP as the
STAC..CLAC constructs intentionally do not nest.

Furthermore, using __put_user() rather than put_user_ex() here is bad
for performance.

Thus, introduce new [compat_]save_altstack_ex() helpers that replace
__[compat_]save_altstack() for x86, being currently the only
architecture which supports put_user_try { ... } put_user_catch().

Reported-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.8+
Link: http://lkml.kernel.org/n/tip-es5p6y64if71k8p5u08agv9n@git.kernel.org
2013-09-01 14:16:33 -07:00
Linus Torvalds
20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
David Howells
34db8aaf0f proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
Move some bits from linux/proc_fs.h to linux/of.h, signal.h and tty.h.

Also move proc_tty_init() and proc_device_tree_init() to fs/proc/internal.h as
they're internal to procfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
cc: devicetree-discuss@lists.ozlabs.org
cc: linux-arch@vger.kernel.org
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Jri Slaby <jslaby@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:40 -04:00
David Howells
2a1486981c Fix breakage in MIPS siginfo handling
MIPS's siginfo handling has been broken since this commit:

	commit 574c4866e3
	Author: Al Viro <viro@zeniv.linux.org.uk>
	Date:   Sun Nov 25 22:24:19 2012 -0500
	consolidate kernel-side struct sigaction declarations

for 64-bit BE MIPS CPUs.

The UAPI variant looks like this:

	struct sigaction {
		unsigned int	sa_flags;
		__sighandler_t	sa_handler;
		sigset_t	sa_mask;
	};

but the core kernel's variant looks like this:

	struct sigaction {
	#ifndef __ARCH_HAS_ODD_SIGACTION
		__sighandler_t	sa_handler;
		unsigned long	sa_flags;
	#else
		unsigned long	sa_flags;
		__sighandler_t	sa_handler;
	#endif
	#ifdef __ARCH_HAS_SA_RESTORER
		__sigrestore_t sa_restorer;
	#endif
		sigset_t	sa_mask;
	};

The problem is that sa_flags has been changed from an unsigned int to an
unsigned long.

Fix this by making sa_flags unsigned int if __ARCH_HAS_ODD_SIGACTION is
defined.

Whilst we're at it, rename __ARCH_HAS_ODD_SIGACTION to
__ARCH_HAS_IRIX_SIGACTION.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-03-19 19:15:52 +01:00
Al Viro
2ce5da1757 new helper: signal_setup_done()
usual "call force_sigsegv or signal_delivered" logics.  Takes
ksignal instead of separate siginfo/k_sigaction.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:26 -05:00
Al Viro
ca86b5dce2 new helper: get_signal()
On success get_signal_to_deliver() fills k_sigaction and siginfo.
_All_ users pass it addresses of the local variables sitting in
the same function.  Then they proceed to pass those addresses
pretty much in tandem to a bunch of helper functions; again, all
callers of those helpers are passing them such a pair, and one that
had been through get_signal_to_deliver() at that.

The obvious cleanup: introduce a new type that would contain a
<k_sigaction,siginfo> pair (struct ksignal) and begin switching to
using it.  Turns out that it's convenient to store the signal number
in the same object.

New helper, taking that sucker is a wrapper for get_signal_to_deliver();
takes struct ksignal * and returns bool.  On success fills ksignal
with the information for signal handler to be invoked.

For now it's a macro (to avoid header ordering headache), but eventually
it'll be a function in kernel/signal.c, with get_signal_to_deliver()
folded into it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:25 -05:00
Al Viro
495dfbf767 generic sys_sigaction() and compat_sys_sigaction()
conditional on OLD_SIGACTION/COMPAT_OLD_SIGACTION

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:23 -05:00
Al Viro
574c4866e3 consolidate kernel-side struct sigaction declarations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:22 -05:00
Al Viro
92a3ce4a1e consolidate declarations of k_sigaction
Only alpha and sparc are unusual - they have ka_restorer in it.
And nobody needs that exposed to userland.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:22 -05:00
Al Viro
9aae8fc05d switch rt_tgsigqueueinfo to COMPAT_SYSCALL_DEFINE
C ABI violations on sparc, ppc and mips

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:21 -05:00
Al Viro
fe9c1db2cf generic compat_sys_rt_sigpending()
conditional on GENERIC_COMPAT_RT_SIGPENDING; by the end of that series
it will become the same thing as COMPAT and conditional will die out.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-03 15:09:19 -05:00
Al Viro
c40702c49f new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those
note that they are relying on access_ok() already checked by caller.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-19 18:07:41 -05:00
Al Viro
5c49574ffd new helper: restore_altstack()
to be used by rt_sigreturn instances

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-19 18:07:40 -05:00
David Howells
607ca46e97 UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-13 10:46:48 +01:00
Al Viro
efee984c27 new helper: signal_delivered()
Does block_sigmask() + tracehook_signal_handler();  called when
sigframe has been successfully built.  All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).

I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:52 -04:00
Al Viro
77097ae503 most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set
Only 3 out of 63 do not.  Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 12:58:51 -04:00
Al Viro
68f3f16d9a new helper: sigsuspend()
guts of saved_sigmask-based sigsuspend/rt_sigsuspend.  Takes
kernel sigset_t *.

Open-coded instances replaced with calling it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-05-21 23:52:30 -04:00
Matt Fleming
5e6292c0f2 signal: add block_sigmask() for adding sigmask to current->blocked
Abstract the code sequence for adding a signal handler's sa_mask to
current->blocked because the sequence is identical for all architectures.
Furthermore, in the past some architectures actually got this code wrong,
so introduce a wrapper that all architectures can use.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:54 -08:00
Linus Torvalds
3ed4c0583d Merge branch 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc
* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (41 commits)
  signal: trivial, fix the "timespec declared inside parameter list" warning
  job control: reorganize wait_task_stopped()
  ptrace: fix signal->wait_chldexit usage in task_clear_group_stop_trapping()
  signal: sys_sigprocmask() needs retarget_shared_pending()
  signal: cleanup sys_sigprocmask()
  signal: rename signandsets() to sigandnsets()
  signal: do_sigtimedwait() needs retarget_shared_pending()
  signal: introduce do_sigtimedwait() to factor out compat/native code
  signal: sys_rt_sigtimedwait: simplify the timeout logic
  signal: cleanup sys_rt_sigprocmask()
  x86: signal: sys_rt_sigreturn() should use set_current_blocked()
  x86: signal: handle_signal() should use set_current_blocked()
  signal: sigprocmask() should do retarget_shared_pending()
  signal: sigprocmask: narrow the scope of ->siglock
  signal: retarget_shared_pending: optimize while_each_thread() loop
  signal: retarget_shared_pending: consider shared/unblocked signals only
  signal: introduce retarget_shared_pending()
  ptrace: ptrace_check_attach() should not do s/STOPPED/TRACED/
  signal: Turn SIGNAL_STOP_DEQUEUED into GROUP_STOP_DEQUEUED
  signal: do_signal_stop: Remove the unneeded task_clear_group_stop_pending()
  ...
2011-05-20 13:33:21 -07:00
Stephen Rothwell
1477fcc290 signal.h need a definition of struct task_struct
This fixes these build errors on powerpc:

  In file included from arch/powerpc/mm/fault.c:18:
  include/linux/signal.h:239: error: 'struct task_struct' declared inside parameter list
  include/linux/signal.h:239: error: its scope is only this definition or declaration, which is probably not what you want
  include/linux/signal.h:240: error: 'struct task_struct' declared inside parameter list
  ..

Exposed by commit e66eed651f ("list: remove prefetching from regular
list iterators"), which removed the include of <linux/prefetch.h> from
<linux/list.h>.

Without that, linux/signal.h no longer accidentally got the declaration
of 'struct task_struct'.

Fix by properly declaring the struct, rather than introducing any new
header file dependency.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-19 18:22:20 -07:00
Oleg Nesterov
b2b07e4fdb signal: trivial, fix the "timespec declared inside parameter list" warning
Fix the compile warning, do_sigtimedwait(struct timespec *) in signal.h
needs the forward declaration of timespec.

Reported-and-acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-05-18 15:08:03 +02:00
Oleg Nesterov
702a5073fd signal: rename signandsets() to sigandnsets()
As Tejun and Linus pointed out, "nand" is the wrong name for "x & ~y",
it should be "andn". Rename signandsets() as suggested.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:39 +02:00
Oleg Nesterov
943df1485a signal: introduce do_sigtimedwait() to factor out compat/native code
Factor out the common code in sys_rt_sigtimedwait/compat_sys_rt_sigtimedwait
to the new helper, do_sigtimedwait().

Add the comment to document the extra tick we add to timespec_to_jiffies(ts),
thanks to Linus who explained this to me.

Perhaps it would be better to move compat_sys_rt_sigtimedwait() into
signal.c under CONFIG_COMPAT, then we can make do_sigtimedwait() static.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
2011-04-28 13:01:38 +02:00
Oleg Nesterov
e6fa16ab9c signal: sigprocmask() should do retarget_shared_pending()
In short, almost every changing of current->blocked is wrong, or at least
can lead to the unexpected results.

For example. Two threads T1 and T2, T1 sleeps in sigtimedwait/pause/etc.
kill(tgid, SIG) can pick T2 for TIF_SIGPENDING. If T2 calls sigprocmask()
and blocks SIG before it notices the pending signal, nobody else can handle
this pending shared signal.

I am not sure this is bug, but at least this looks strange imho. T1 should
not sleep forever, there is a signal which should wake it up.

This patch moves the code which actually changes ->blocked into the new
helper, set_current_blocked() and changes this code to call
retarget_shared_pending() as exit_signals() does. We should only care about
the signals we just blocked, we use "newset & ~current->blocked" as a mask.

We do not check !sigisemptyset(newblocked), retarget_shared_pending() is
cheap unless mask & shared_pending.

Note: for this particular case we could simply change sigprocmask() to
return -EINTR if signal_pending(), but then we should change other callers
and, more importantly, if we need this fix then set_current_blocked() will
have more callers and some of them can't restart. See the next patch as a
random example.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
2011-04-28 13:01:37 +02:00
Dave Young
d33ed52d57 sysctl extern cleanup: signal
Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move print_fatal_signals extern declaration to linux/signal.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:44 -08:00
Oleg Nesterov
4a30debfb7 signals: introduce do_send_sig_info() helper
Introduce do_send_sig_info() and convert group_send_sig_info(),
send_sig_info(), do_send_specific() to use this helper.

Hopefully it will have more users soon, it allows to specify
specific/group behaviour via "bool group" argument.

Shaves 80 bytes from .text.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:01 -07:00
Thomas Gleixner
62ab4505e3 signals: implement sys_rt_tgsigqueueinfo
sys_kill has the per thread counterpart sys_tgkill. sigqueueinfo is
missing a thread directed counterpart. Such an interface is important
for migrating applications from other OSes which have the per thread
delivery implemented.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Ulrich Drepper <drepper@redhat.com>
2009-04-30 19:24:24 +02:00
Oleg Nesterov
6ca25b5513 kill_pid_info: don't take now unneeded tasklist_lock
Previously handle_stop_signal(SIGCONT) could drop ->siglock.  That is why
kill_pid_info(SIGCONT) takes tasklist_lock to make sure the target task can't
go away after unlock.  Not needed now.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:34 -07:00
Oleg Nesterov
d12619b5ff fix group stop with exit race
do_signal_stop() counts all sub-thread and sets ->group_stop_count
accordingly.  Every thread should decrement ->group_stop_count and stop,
the last one should notify the parent.

However a sub-thread can exit before it notices the signal_pending(), or it
may be somewhere in do_exit() already.  In that case the group stop never
finishes properly.

Note: this is a minimal fix, we can add some optimizations later.  Say we
can return quickly if thread_group_empty().  Also, we can move some signal
related code from exit_notify() to exit_signals().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:27 -08:00
Adrian Bunk
a1c9eea9e5 proper prototype for signals_init()
Add a proper prototype for signals_init() in include/linux/signal.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:02 -08:00
Masoud Asgharifard Sharbiani
abd4f7505b x86: i386-show-unhandled-signals-v3
This patch makes the i386 behave the same way that x86_64 does when a
segfault happens.  A line gets printed to the kernel log so that tools
that need to check for failures can behave more uniformly between
debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 >
/proc/sys/debug/exception-trace)

Also, all of the lines being printed are now using printk_ratelimit() to
deny the ability of DoS from a local user with a program like the
following:

main()
{
       while (1)
               if (!fork()) *(int *)0 = 0;
}

This new revision also includes the fix that Andrew did which got rid of
new sysctl that was added to the system in earlier versions of this.
Also, 'show-unhandled-signals' sysctl has been renamed back to the old
'exception-trace' to avoid breakage of people's scripts.

AK: Enabling by default for i386 will be likely controversal, but let's see what happens
AK: Really folks, before complaining just fix your segfaults
AK: I bet this will find a lot of silent issues

Signed-off-by: Masoud Sharbiani <masouds@google.com>
Signed-off-by: Andi Kleen <ak@suse.de>
[ Personally, I've found the complaints useful on x86-64, so I'm all for
  this. That said, I wonder if we could do it more prettily..   -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22 11:03:37 -07:00
Robert P. J. Day
0a3021f4e2 Remove unnecessary includes of spinlock.h under include/linux
Remove the obviously unnecessary includes of <linux/spinlock.h> under the
include/linux/ directory, and fix the couple errors that are introduced as
a result of that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:42 -07:00
Davide Libenzi
fba2afaaec signal/timer/event: signalfd core
This patch series implements the new signalfd() system call.

I took part of the original Linus code (and you know how badly it can be
broken :), and I added even more breakage ;) Signals are fetched from the same
signal queue used by the process, so signalfd will compete with standard
kernel delivery in dequeue_signal().  If you want to reliably fetch signals on
the signalfd file, you need to block them with sigprocmask(SIG_BLOCK).  This
seems to be working fine on my Dual Opteron machine.  I made a quick test
program for it:

http://www.xmailserver.org/signafd-test.c

The signalfd() system call implements signal delivery into a file descriptor
receiver.  The signalfd file descriptor if created with the following API:

int signalfd(int ufd, const sigset_t *mask, size_t masksize);

The "ufd" parameter allows to change an existing signalfd sigmask, w/out going
to close/create cycle (Linus idea).  Use "ufd" == -1 if you want a brand new
signalfd file.

The "mask" allows to specify the signal mask of signals that we are interested
in.  The "masksize" parameter is the size of "mask".

The signalfd fd supports the poll(2) and read(2) system calls.  The poll(2)
will return POLLIN when signals are available to be dequeued.  As a direct
consequence of supporting the Linux poll subsystem, the signalfd fd can use
used together with epoll(2) too.

The read(2) system call will return a "struct signalfd_siginfo" structure in
the userspace supplied buffer.  The return value is the number of bytes copied
in the supplied buffer, or -1 in case of error.  The read(2) call can also
return 0, in case the sighand structure to which the signalfd was attached,
has been orphaned.  The O_NONBLOCK flag is also supported, and read(2) will
return -EAGAIN in case no signal is available.

If the size of the buffer passed to read(2) is lower than sizeof(struct
signalfd_siginfo), -EINVAL is returned.  A read from the signalfd can also
return -ERESTARTSYS in case a signal hits the process.  The format of the
struct signalfd_siginfo is, and the valid fields depends of the (->code &
__SI_MASK) value, in the same way a struct siginfo would:

struct signalfd_siginfo {
	__u32 signo;	/* si_signo */
	__s32 err;	/* si_errno */
	__s32 code;	/* si_code */
	__u32 pid;	/* si_pid */
	__u32 uid;	/* si_uid */
	__s32 fd;	/* si_fd */
	__u32 tid;	/* si_fd */
	__u32 band;	/* si_band */
	__u32 overrun;	/* si_overrun */
	__u32 trapno;	/* si_trapno */
	__s32 status;	/* si_status */
	__s32 svint;	/* si_int */
	__u64 svptr;	/* si_ptr */
	__u64 utime;	/* si_utime */
	__u64 stime;	/* si_stime */
	__u64 addr;	/* si_addr */
};

[akpm@linux-foundation.org: fix signalfd_copyinfo() on i386]
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 08:29:36 -07:00
Roland McGrath
55c0d1f83e Move sig_kernel_* et al macros to linux/signal.h
This patch moves the sig_kernel_* and related macros from kernel/signal.c
to linux/signal.h, and cleans them up slightly.  I need the sig_kernel_*
macros for default signal behavior in the utrace code, and want to avoid
duplication or overhead to share the knowledge.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:49 -07:00
Christoph Lameter
298ec1e2ac [PATCH] Move sighand_cachep to include/signal.h
Move sighand_cachep definitioni to linux/signal.h

The sighand cache is only used in fs/exec.c and kernel/fork.c.  It is defined
in kernel/fork.c but only used in fs/exec.c.

The sighand_cachep is related to signal processing.  So add the definition to
signal.h.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:22 -08:00
Thomas Gleixner
6e21361619 [PATCH] irq-flags: consolidate flags for request_irq
The recent interrupt rework introduced bit value conflicts with sparc.
Instead of introducing new architecture flags mess, move the interrupt SA_
flags out of the signal namespace and replace them by interrupt related flags.

This allows to remove the obsolete SA_INTERRUPT flag and clean up the bit
field values.

This patch:

Move the interrupt related SA_ flags out of linux/signal.h and rename them to
IRQF_ .  This moves the interrupt related flags out of the signal namespace
and allows to remove the architecture dependencies.

SA_INTERRUPT is not needed by userspace and glibc so it can be removed safely.

The existing SA_ constants are kept for easy transition and will be
removed after a 6 month grace period.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Jens Axboe <axboe@suse.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>                                 Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:46 -07:00
David Woodhouse
d6754b401a Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-04-29 01:42:26 +01:00
Andrew Morton
13e87ec686 [PATCH] request_irq(): remove warnings from irq probing
- Add new SA_PROBEIRQ which suppresses the new sharing-mismatch warning.
  Some drivers like to use request_irq() to find an unused interrupt slot.

- Use it in i82365.c

- Kill unused SA_PROBE.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28 08:33:46 -07:00
David Woodhouse
7ab2febd4d Don't include private headers from user-visible part of linux/signal.h
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-25 14:55:46 +01:00
Oleg Nesterov
6a14c5c9da [PATCH] move __exit_signal() to kernel/exit.c
__exit_signal() is private to release_task() now.  I think it is better to
make it static in kernel/exit.c and export flush_sigqueue() instead - this
function is much more simple and straightforward.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 18:36:43 -08:00
George Anzinger
71fabd5e48 [PATCH] sigaction should clear all signals on SIG_IGN, not just < 32
While rooting aroung in the signal code trying to understand how to fix the
SIG_IGN ploy (set sig handler to SIG_IGN and flood system with high speed
repeating timers) I came across what, I think, is a problem in sigaction()
in that when processing a SIG_IGN request it flushes signals from 1 to
SIGRTMIN and leaves the rest.  Attempt to fix this.

Signed-off-by: George Anzinger <george@mvista.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:53 -08:00
Russell King
9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00
Oleg Nesterov
19a4fcb531 [PATCH] kill sigqueue->lock
This lock is used in sigqueue_free(), but it is always equal to
current->sighand->siglock, so we don't need to keep it in the struct
sigqueue.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:19 -08:00
Geert Uytterhoeven
a58e76f254 [PATCH] Remove obsolete HAVE_ARCH_GET_SIGNAL_TO_DELIVER?
Now m68k no longer sets HAVE_ARCH_GET_SIGNAL_TO_DELIVER, can it be removed
completely? Or may ARM26 still need it? Note that its usage was removed from
kernel/signal.c about 2 months ago.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-12 20:43:21 -07:00
Jesper Juhl
e5bdd883a1 [PATCH] new valid_signal() function
This patch adds a new function valid_signal() that tests if its argument is
a valid signal number.

The reasons for adding this new function are:

- some code currently testing _NSIG directly has off-by-one errors.
  Using this function instead avoids such errors.

- some code currently tests unsigned signal numbers for <0 which is
  pointless and generates warnings when building with gcc -W.  Using this
  function instead avoids such warnings.

I considered various places to add this function but eventually settled on
include/linux/signal.h as the most logical place for it.  If there's some
reason this is a bad choice then please let me know (hints as to a better
location are then welcome of course).

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:13 -07:00
Stas Sergeev
7f261b5f0d [PATCH] move SA_xxx defines to linux/signal.h
The attached patch moves the IRQ-related SA_xxx flags (namely, SA_PROBE,
SA_SAMPLE_RANDOM and SA_SHIRQ) from all the arch-specific headers to
linux/signal.h.  This looks like a left-over after the irq-handling code
was consolidated.  The code was moved to kernel/irq/*, but the flags are
still left per-arch.

Right now, adding a new IRQ flag to the arch-specific header, like this
patch does:
http://cvs.sourceforge.net/viewcvs.py/*checkout*/alsa/alsa-driver/utils/patches/pcsp-kernel-2.6.10-03.diff?rev=1.1
no longer works, it breaks the compilation for all other arches, unless you
add that flag to all the other arch-specific headers too.  So I think such
a clean-up makes sense.

Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:02 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00