Commit graph

44 commits

Author SHA1 Message Date
Zheng Liu
8563000d3b ext4: use consistent ssize_t type in ext4_file_write()
The generic_file_aio_write() function returns ssize_t, and
ext4_file_write() returns a ssize_t, so use a ssize_t to collect the
return value from generic_file_aio_write().  It shouldn't matter since
the VFS read/write paths shouldn't allow a read greater than MAX_INT,
but there was previously a bug in the AIO code paths, and it's best if
we use a consistent type so that the return value from
generic_file_aio_write() can't get truncated.

Reported-by: Jouni Siren <jouni.siren@iki.fi>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-28 18:06:51 -04:00
Linus Torvalds
f1f8935a5c Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (97 commits)
  jbd2: Unify log messages in jbd2 code
  jbd/jbd2: validate sb->s_first in journal_get_superblock()
  ext4: let ext4_ext_rm_leaf work with EXT_DEBUG defined
  ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabled
  ext4: fix a typo in struct ext4_allocation_context
  ext4: Don't normalize an falloc request if it can fit in 1 extent.
  ext4: remove comments about extent mount option in ext4_new_inode()
  ext4: let ext4_discard_partial_buffers handle unaligned range correctly
  ext4: return ENOMEM if find_or_create_pages fails
  ext4: move vars to local scope in ext4_discard_partial_page_buffers_no_lock()
  ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten
  ext4: optimize locking for end_io extent conversion
  ext4: remove unnecessary call to waitqueue_active()
  ext4: Use correct locking for ext4_end_io_nolock()
  ext4: fix race in xattr block allocation path
  ext4: trace punch_hole correctly in ext4_ext_map_blocks
  ext4: clean up AGGRESSIVE_TEST code
  ext4: move variables to their scope
  ext4: fix quota accounting during migration
  ext4: migrate cleanup
  ...
2011-11-02 10:06:20 -07:00
Andi Kleen
4cce0e28b9 ext4: replace cut'n'pasted llseek code with generic_file_llseek_size
This gives ext4 the benefits of unlocked llseek.

Cc: tytso@mit.edu
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:59 +02:00
Darrick J. Wong
cf8039036a ext4: prevent stack overrun in ext4_file_open
In ext4_file_open, the filesystem records the mountpoint of the first
file that is opened after mounting the filesystem.  It does this by
allocating a 64-byte stack buffer, calling d_path() to grab the mount
point through which this file was accessed, and then memcpy()ing 64
bytes into the superblock's s_last_mounted field, starting from the
return value of d_path(), which is stored as "cp".  However, if cp >
buf (which it frequently is since path components are prepended
starting at the end of buf) then we can end up copying stack data into
the superblock.

Writing stack variables into the superblock doesn't sound like a great
idea, so use strlcpy instead.  Andi Kleen suggested using strlcpy
instead of strncpy.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-25 09:18:41 -04:00
Christoph Hellwig
4e34e719e4 fs: take the ACL checks to common code
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss.  This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25 14:30:23 -04:00
Josef Bacik
c334b1138b Ext4: handle SEEK_HOLE/SEEK_DATA generically
Since Ext4 has its own lseek we need to make sure it handles
SEEK_HOLE/SEEK_DATA.  For now just do the same thing that is done in the generic
case, somebody else can come along and make it do fancy things later.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:57 -04:00
Jan Kara
ae24f28d39 ext4: Convert ext4 to new truncate calling convention
Trivial conversion.  Fixup one error handling case calling vmtruncate()
and remove ->truncate callback. We also fix a bug that IS_IMMUTABLE and
IS_APPEND files could not be truncated during failed writes. In fact, the
test can be completely removed as upper layers do necessary permission
checks for truncate in do_sys_[f]truncate() and may_open() anyway.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-25 17:39:48 -04:00
Eric Sandeen
e9e3bcecf4 ext4: serialize unaligned asynchronous DIO
ext4 has a data corruption case when doing non-block-aligned
asynchronous direct IO into a sparse file, as demonstrated
by xfstest 240.

The root cause is that while ext4 preallocates space in the
hole, mappings of that space still look "new" and 
dio_zero_block() will zero out the unwritten portions.  When
more than one AIO thread is going, they both find this "new"
block and race to zero out their portion; this is uncoordinated
and causes data corruption.

Dave Chinner fixed this for xfs by simply serializing all
unaligned asynchronous direct IO.  I've done the same here.
The difference is that we only wait on conversions, not all IO.
This is a very big hammer, and I'm not very pleased with
stuffing this into ext4_file_write().  But since ext4 is
DIO_LOCKING, we need to serialize it at this high level.

I tried to move this into ext4_ext_direct_IO, but by then
we have the i_mutex already, and we will wait on the
work queue to do conversions - which must also take the
i_mutex.  So that won't work.

This was originally exposed by qemu-kvm installing to
a raw disk image with a normal sector-63 alignment.  I've
tested a backport of this patch with qemu, and it does
avoid the corruption.  It is also quite a lot slower
(14 min for package installs, vs. 8 min for well-aligned)
but I'll take slow correctness over fast corruption any day.

Mingming suggested that we can track outstanding
conversions, and wait on those so that non-sparse
files won't be affected, and I've implemented that here;
unaligned AIO to nonsparse files won't take a perf hit.

[tytso@mit.edu: Keep the mutex as a hashed array instead
 of bloating the ext4 inode]

[tytso@mit.edu: Fix up namespace issues so that global
 variables are protected with an "ext4_" prefix.]

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 08:17:34 -05:00
Christoph Hellwig
2fe17c1075 fallocate should be a file operation
Currently all filesystems except XFS implement fallocate asynchronously,
while XFS forced a commit.  Both of these are suboptimal - in case of O_SYNC
I/O we really want our allocation on disk, especially for the !KEEP_SIZE
case where we actually grow the file with user-visible zeroes.  On the
other hand always commiting the transaction is a bad idea for fast-path
uses of fallocate like for example in recent Samba versions.   Given
that block allocation is a data plane operation anyway change it from
an inode operation to a file operation so that we have the file structure
available that lets us check for O_SYNC.

This also includes moving the code around for a few of the filesystems,
and remove the already unnedded S_ISDIR checks given that we only wire
up fallocate for regular files.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-17 02:25:31 -05:00
Theodore Ts'o
8aefcd557d ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessary
Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing.  This allows us to further slim down the ext4_inode_info
structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 12:29:43 -05:00
Toshiyuki Okajima
e0d10bfa91 ext4: improve llseek error handling for overly large seek offsets
The llseek system call should return EINVAL if passed a seek offset
which results in a write error.  What this maximum offset should be
depends on whether or not the huge_file file system feature is set,
and whether or not the file is extent based or not.


If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be 
written (write systemcall) is different from the maximum size which can be 
sought (lseek systemcall).

For example, the following 2 cases demonstrates the differences
between the maximum size which can be written, versus the seek offset
allowed by the llseek system call:

#1: mkfs.ext3 <dev>; mount -t ext4 <dev>
#2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev>

Table. the max file size which we can write or seek
       at each filesystem feature tuning and file flag setting
+============+===============================+===============================+
| \ File flag|                               |                               |
|      \     |     !EXT4_EXTENTS_FL          |        EXT4_EXTETNS_FL        |
|case       \|                               |                               |
+------------+-------------------------------+-------------------------------+
| #1         |   write:      2194719883264   | write:       --------------   |
|            |   seek:       2199023251456   | seek:        --------------   |
+------------+-------------------------------+-------------------------------+
| #2         |   write:      4402345721856   | write:       17592186044415   |
|            |   seek:      17592186044415   | seek:        17592186044415   |
+------------+-------------------------------+-------------------------------+

The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes
(= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped 
maxbytes).  Although generic_file_llseek uses only extent-mapped maxbytes.
(llseek of ext4_file_operations is generic_file_llseek which uses
sb->s_maxbytes.)

Therefore we create ext4 llseek function which uses 2 maxbytes.

The new own function originates from generic_file_llseek().
If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters 
inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes.

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
2010-10-27 21:30:06 -04:00
Toshiyuki Okajima
d889dc8382 ext4: fix EFBIG edge case when writing to large non-extent file
By running the following reproducer, we can confirm that the write 
system call returns with 0 when it should return the error EFBIG.

#!/bin/sh

/bin/dd if=/dev/zero of=./img bs=1k count=1 seek=1024k > /dev/null 2>&1
/sbin/mkfs.ext3 -Fq ./img
/bin/mount -o loop -t ext4 ./img /mnt
/bin/touch /mnt/file
strace /bin/dd if=/dev/zero of=/mnt/file conv=notrunc bs=1k count=1 seek=$((2194719883264/1024)) 2>&1 | /bin/egrep "write.* 1024\) = "
/bin/umount /mnt
exit

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eric Sandeen <sandeen@redhat.com>
2010-07-27 11:56:07 -04:00
Theodore Ts'o
a0375156ca ext4: Clean up s_dirt handling
We don't need to set s_dirt in most of the ext4 code when journaling
is enabled.  In ext3/4 some of the summary statistics for # of free
inodes, blocks, and directories are calculated from the per-block
group statistics when the file system is mounted or unmounted.  As a
result the superblock doesn't have to be updated, either via the
journal or by setting s_dirt.  There are a few exceptions, most
notably when resizing the file system, where the superblock needs to
be modified --- and in that case it should be done as a journalled
operation if possible, and s_dirt set only in no-journal mode.

This patch will optimize out some unneeded disk writes when using ext4
with a journal.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-11 23:14:04 -04:00
Dmitry Monakhov
12e9b89200 ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
At several places we modify EXT4_I(inode)->i_flags without holding
i_mutex (ext4_do_update_inode, ...). These modifications are racy and
we can lose updates to i_flags. So convert handling of i_flags to use
bitops which are atomic.

https://bugzilla.kernel.org/show_bug.cgi?id=15792

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-16 22:00:00 -04:00
Linus Torvalds
e213e26ab3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05 13:20:53 -08:00
Linus Torvalds
1f63b9c15b Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (36 commits)
  ext4: fix up rb_root initializations to use RB_ROOT
  ext4: Code cleanup for EXT4_IOC_MOVE_EXT ioctl
  ext4: Fix the NULL reference in double_down_write_data_sem()
  ext4: Fix insertion point of extent in mext_insert_across_blocks()
  ext4: consolidate in_range() definitions
  ext4: cleanup to use ext4_grp_offs_to_block()
  ext4: cleanup to use ext4_group_first_block_no()
  ext4: Release page references acquired in ext4_da_block_invalidatepages
  ext4: Fix ext4_quota_write cross block boundary behaviour
  ext4: Convert BUG_ON checks to use ext4_error() instead
  ext4: Use direct_IO_no_locking in ext4 dio read
  ext4: use ext4_get_block_write in buffer write
  ext4: mechanical rename some of the direct I/O get_block's identifiers
  ext4: make "offset" consistent in ext4_check_dir_entry()
  ext4: Handle non empty on-disk orphan link
  ext4: explicitly remove inode from orphan list after failed direct io
  ext4: fix error handling in migrate
  ext4: deprecate obsoleted mount options
  ext4: Fix fencepost error in chosing choosing group vs file preallocation.
  jbd2: clean up an assertion in jbd2_journal_commit_transaction()
  ...
2010-03-05 10:47:00 -08:00
Christoph Hellwig
871a293155 dquot: cleanup dquot initialize routine
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig
907f4554e2 dquot: move dquot initialization responsibility into the filesystem
Currently various places in the VFS call vfs_dq_init directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the initialization.   For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Al Viro
3899167dbd Get rid of mnt_mountpoint abuses in ext4
path to mnt/mnt->mnt_root is no worse than that to
mnt->mnt_parent/mnt->mnt_mountpoint *and* needs no
pinning the sucker down (mnt is not going away and
mnt->mnt_root won't change)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:07:54 -05:00
Theodore Ts'o
19f5fb7ad6 ext4: Use bitops to read/modify EXT4_I(inode)->i_state
At several places we modify EXT4_I(inode)->i_state without holding
i_mutex (ext4_release_file, ext4_bmap, ext4_journalled_writepage,
ext4_do_update_inode, ...). These modifications are racy and we can
lose updates to i_state. So convert handling of i_state to use bitops
which are atomic.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-01-24 14:34:07 -05:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Jan Kara
0d34ec62e1 ext4: Remove syncing logic from ext4_file_write
The syncing is now properly handled by generic_file_aio_write() so
no special ext4 code is needed.

CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:16 +02:00
Linus Torvalds
1d5ccd1c42 ext[234]: move over to 'check_acl' permission model
Don't implement per-filesystem 'extX_permission()' functions that have
to be called for every path component operation, and instead just expose
the actual ACL checking so that the VFS layer can now do it for us.

Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-08 11:09:04 -07:00
Theodore Ts'o
bc0b0d6d69 ext4: update the s_last_mounted field in the superblock
This field can be very helpful when a system administrator is trying
to sort through large numbers of block devices or filesystem images.
What is stored in this field can be ambiguous if multiple filesystem
namespaces are in play; what we store in practice is the mountpoint
interpreted by the process's namespace which first opens a file in the
filesystem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-13 10:09:48 -04:00
Aneesh Kumar K.V
d6014301b5 ext4: Fix discard of inode prealloc space with delayed allocation.
With delayed allocation we should not/cannot discard inode prealloc
space during file close. We would still have dirty pages for which we
haven't allocated blocks yet. With this fix after each get_blocks
request we check whether we have zero reserved blocks and if yes and
we don't have any writers on the file we discard inode prealloc space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-27 22:36:43 -04:00
Theodore Ts'o
7d8f9f7d15 ext4: Automatically allocate delay allocated blocks on close
When closing a file that had been previously truncated, force any
delay allocated blocks that to be allocated so that if the filesystem
is mounted with data=ordered, the data blocks will be pushed out to
disk along with the journal commit.  Many application programs expect
this, so we do this to avoid zero length files if the system crashes
unexpectedly.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-02-24 08:21:14 -05:00
Aneesh Kumar K.V
3a06d778df ext4: sparse fixes
* Change EXT4_HAS_*_FEATURE to return a boolean
* Add a function prototype for ext4_fiemap() in ext4.h
* Make ext4_ext_fiemap_cb() and ext4_xattr_fiemap() be static functions
* Add lock annotations to mb_free_blocks()

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-22 15:04:59 -05:00
Theodore Ts'o
03010a3350 ext4: Rename ext4dev to ext4
The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix.  Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 20:02:48 -04:00
Eric Sandeen
6873fa0de1 Hook ext4 to the vfs fiemap interface.
ext4_ext_walk_space() was reinstated to be used for iterating over file
extents with a callback; it is used by the ext4 fiemap implementation.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
2008-10-07 00:46:36 -04:00
Theodore Ts'o
c2ea3fde61 ext4: Remove old legacy block allocator
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 09:40:52 -04:00
Theodore Ts'o
af5bc92dde ext4: Fix whitespace checkpatch warnings/errors
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 22:25:24 -04:00
Mingming Cao
3e3398a08d ext4: delayed allocation i_blocks fix for stat
Right now i_blocks is not getting updated until the blocks are actually
allocaed on disk.  This means with delayed allocation, right after files
are copied, "ls -sF" shoes the file as taking 0 blocks on disk.  "du"
also shows the files taking zero space, which is highly confusing to the
user.

Since delayed allocation already keeps track of per-inode total
number of blocks that are subject to delayed allocation, this patch fix
this by using that to adjust the value returned by stat(2). When real
block allocation is done, the i_blocks will get updated. Since the
reserved blocks for delayed allocation will be decreased, this will be
keep value returned by stat(2) consistent.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Aneesh Kumar K.V
2e9ee85035 ext4: Use page_mkwrite vma_operations to get mmap write notification.
We would like to get notified when we are doing a write on mmap section.
This is needed with respect to preallocated area. We split the preallocated
area into initialzed extent and uninitialzed extent in the call back. This
let us handle ENOSPC better. Otherwise we get ENOSPC in the writepage and
that would result in data loss. The changes are also needed to handle ENOSPC
when writing to an mmap section of files with holes.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Christoph Hellwig
3dcf54515a ext4: move headers out of include/linux
Move ext4 headers out of include/linux.  This is just the trivial move,
there's some more thing that could be done later. 

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 18:13:32 -04:00
Andi Kleen
5cdd7b2d77 Convert ext4 to use unlocked_ioctl
I checked ext4_ioctl and it looked largely safe to not be used
without BKL.  So convert it over to unlocked_ioctl.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-04-29 22:03:54 -04:00
Aneesh Kumar K.V
0e855ac8b1 ext4: Convert truncate_mutex to read write semaphore.
We are currently taking the truncate_mutex for every read. This would have
performance impact on large CPU configuration. Convert the lock to read write
semaphore and take read lock when we are trying to read the file.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2008-01-28 23:58:26 -05:00
Eric Sandeen
e2b4657453 ext4: store maxbytes for bitmapped files and return EFBIG as appropriate
Calculate & store the max offset for bitmapped files, and
catch too-large seeks, truncates, and writes in ext4, shortening
or rejecting as appropriate.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28 23:58:27 -05:00
Amit Arora
a2df2a6340 fallocate support in ext4
This patch implements ->fallocate() inode operation in ext4. With this
patch users of ext4 file systems will be able to use fallocate() system
call for persistent preallocation. Current implementation only supports
preallocation for regular files (directories not supported as of date)
with extent maps. This patch does not support block-mapped files currently.
Only FALLOC_ALLOCATE and FALLOC_RESV_SPACE modes are being supported as of
now.

Signed-off-by: Amit Arora <aarora@in.ibm.com>
2007-07-17 21:42:41 -04:00
Jens Axboe
5ffc4ef45b sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
They can use generic_file_splice_read() instead. Since sys_sendfile() now
prefers that, there should be no change in behaviour.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10 08:04:13 +02:00
Arjan van de Ven
754661f143 [PATCH] mark struct inode_operations const 1
Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
Josef "Jeff" Sipek
9d549890e6 [PATCH] ext4: change uses of f_{dentry, vfsmnt} to use f_path
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext4
filesystem.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:41 -08:00
Mingming Cao
dab291af8d [PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbd
Reworked from a patch by Mingming Cao and Randy Dunlap

Signed-off-By: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:16 -07:00
Mingming Cao
617ba13b31 [PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbols
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00
Dave Kleikamp
ac27a0ec11 [PATCH] ext4: initial copy of files from ext3
Start of the ext4 patch series.  See Documentation/filesystems/ext4.txt for
details.

This is a simple copy of the files in fs/ext3 to fs/ext4 and
/usr/incude/linux/ext3* to /usr/include/ex4*

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00