I have the occasional absent cursor on i845 and I want to know why.
This should help by revealing the last known cursor state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't need to hold struct_mutex all through intel_pipe_set_base(),
just need to hold it while pinning/unpinning the buffers.
So reduce the struct_mutext usage in intel_pipe_set_base() just like we
did for the sprite code in:
commit 82284b6bec
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Tue Oct 1 18:02:12 2013 +0300
drm/i915: Reduce the time we hold struct mutex in sprite update_plane code
The FBC and PSR locking is still entirely fubar. That stuff was
previouly done while holding struct_mutex, so leave it there for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on Bspec the command parser must be stopped prior to
issuing sync flush. This should be done by the caller of
intel_ring_setup_status_page. Patch adds a warning if it is
not done.
v2: rebased based on new patch (wait for ring to become idle)
Signed-off-by: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
make sure we wait for rings to become idle once they are
disabled. In case of timeout print an error message
Signed-off-by: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
[danvet: Frob patch as suggested by Chris.]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rings should be idle before issuing sync_flush
(in intel_ring_setup_status_page). This patch moves the ring
disabling before doing the HW status page setup.
Signed-off-by: Naresh Kumar Kachhi <naresh.kumar.kachhi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our code allows have a PPGTT that is smaller than the maximum size for
GEN6-GEN7. Though I don't think this actually ever occurs, the code may
as well work properly and more importantly look correct by using the
variable size instead of the HW max.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I'm not clear if the hardware is still subject to the same prefetching
issues that made us use a scratch page in the first place. In either
case, we're using garbage with the current code (we will end up using
offset 0).
This may be the cause of our current gem_cpu_reloc regression with
PPGTT. I cannot test it at the moment.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Introduced in
commit e0e33f8ff6f0b6d286afc314802be4993341bd47
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Mar 4 19:23:07 2014 +0200
The impact was luckily minimal, due to the extra check we do against a
software pipestat IRQ mask.
Caught by Fengguang's 0-day tester.
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BSpec is a bit unclear whether HDMI+HDMI cloning should work on g4x.
Tests on real hardware say that it does. Since g4x can't send
infoframes to more than one HDMI port anyway, we don't lose anything
by allow it.
For PCH platforms BSpec explicitly forbids HDMI+HDMI cloning.
Whether HDMI+HDMI cloning might also work on VLV is a bit unclear, but
since we'd at least lose the capability of sending infoframes to more
than one cloned HDMI port, it doesn't seem like a good idea to allow it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73850
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HDMI+VGA cloning should be supported on all platforms. The only real
obstacle is the 1.5x clock adjustment for 12bpc HDMI, but that is now
taken care of, so we can allow HDMI+VGA cloning.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73850
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When cloning HDMI with other output types, we can't use 12bpc since the
clocks for the other encoder types would be off. So have
intel_hdmi_compute_config() check if there are other encoders besides
HDMI being fed from the same pipe, and if so, pick 8bpc insted if 12bpc.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTHSaRAAoJEHm+PkMAQRiG7G8IAJHElwFDNSQE7Y9MmbicrAMG
kfjhBtBpTaVrJKQXegCNUwDaLLyC4oLIxDheW84oPXbrEGDLqPtBov/hrcFkHVr4
lh/ZYk02nYtcfpN0JnL/Yj2oKHVmBWs0vFlM7StSFsJCj10DoCVQQdmAJ8XODTPo
CXMapk+UikTX1TlIO8+B5toyl3R1OqPmW211UV1vQVLKy66hu+MKVN/V+/EyopL0
1jO81EDpaRaeIJh1/okcyUoIq9pqLkAWNpeQ7uyXZ+Sfivt9RXwLYKmAB3lP20Hc
ZMIIoHSCyYRFjxLlQvt02bA9nY4wTY7YN5kZ2kk65y7TFfhcGsCw1Sc69iyCoKs=
=CJcA
-----END PGP SIGNATURE-----
Merge tag 'v3.14-rc6' into drm-intel-next-queued
Linux 3.14-rc6
I need the hdmi/dvi-dual link fixes in 3.14 to avoid ugly conflicts
when merging Ville's new hdmi cloning support into my -next tree
Conflicts:
drivers/gpu/drm/i915/Makefile
drivers/gpu/drm/i915/intel_dp.c
Makefile cleanup conflicts with an acpi build fix, intel_dp.c is
trivial.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we allow encoders to indicate whether they can be part of a
cloned set with just one flag. That's not flexible enough to describe
the actual hardware capabilities. Instead make it a bitmask of encoder
types with which the current encoder can be cloned.
For now we set the bitmask to allow DVO+DVO and DVO+VGA, which should
match what the old boolean flag allowed. We will add some more cloning
options in the future.
Note that this patch also removes the encoder.possible_clones setting
from encoder setup code - we compute this dynamically.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add Ville's explanation why removing the encoder
possible_clones is save.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When adding new gunk, _always_ think of a good place. Start/end
usually just means that this didn't happen, and on top of that results
in needless conflicts with other patches doing the same.
Introduced in
commit 62d5d69b49
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Tue Feb 25 17:11:28 2014 +0200
drm/i915: Add suspend count to error state
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The stolen allocator objects loudly if the caller requests a zero-sized
object. This is a useful verbose check as in most cases the request
should have been pruned much early. Here we just want to silently return
before attempting the allocation.
Regression from
commit 484b41dd70
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri Mar 7 08:57:55 2014 -0800
drm/i915: remove early fb allocation dependency on CONFIG_FB v2
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75963
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
During KMS takeover, we try to capture the current configuration and
preserve it across our initialisation. For a variety of reasons, we may
fail this, for example if the current mode was using the legacy VGA
plane. Under such circumstances, we discard the fb in the plane config
and tried to find a matching fb on another CRTC. This obviously also
failed, leaving the plane config fb dangling, pointing to the freed block.
Regression from
commit 484b41dd70
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri Mar 7 08:57:55 2014 -0800
drm/i915: remove early fb allocation dependency on CONFIG_FB v2
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75963
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
By stuffing the fb allocation into the crtc, we get mode set lifetime
refcounting for free, but have to handle the initial pin & fence
slightly differently. It also means we can move the shared fb handling
into the core rather than leaving it out in the fbdev code.
v2: null out crtc->fb on error (Daniel)
take fbdev fb ref and remove unused error path (Daniel)
Requested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Retrieve current framebuffer config info from the regs and create an fb
object for the buffer the BIOS or boot loader left us. This should
allow for smooth transitions to userspace apps once we finish the
initial configuration construction.
v2: check for non-native modes and adjust (Jesse)
fixup aperture and cmap frees (Imre)
use unlocked unref if init_bios fails (Jesse)
fix curly brace around DSPADDR check (Imre)
comment failure path for pin_and_fence (Imre)
v3: fixup fixup of aperture frees (Chris)
v4: update to current bits (locking & pin_and_fence hack) (Jesse)
v5: move fb config fetch to display code (Jesse)
re-order hw state readout on initial load to suit fb inherit (Jesse)
re-add pin_and_fence in fbdev code to make sure we refcount properly (Je
v6: rename to plane_config (Daniel)
check for valid object when initializing BIOS fb (Jesse)
split from plane_config readout and other display changes (Jesse)
drop use_bios_fb option (Chris)
update comments (Jesse)
rework fbdev_init_bios for clarity (Jesse)
drop fb obj ref under lock (Chris)
v7: use fb object from plane_config instead (Ville)
take ref on fb object (Jesse)
v8: put under i915_fastboot option (Jesse)
fix fb ptr checking (Jesse)
inform drm_fb_helper if we fail to enable a connector (Jesse)
drop unnecessary enabled[] modifications in failure cases (Chris)
split from BIOS connector config readout (Daniel)
don't memset the fb buffer if preallocated (Chris)
alloc ifbdev up front and pass to init_bios (Chris)
check for bad ifbdev in restore_mode too (Chris)
v9: fix up !fastboot bpp setting (Jesse)
fix up !fastboot helper alloc (Jesse)
make sure BIOS fb is sufficient for biggest active pipe (Jesse)
v10:fix up size calculation for proposed fbs (Chris)
go back to two pass pipe fb assignment (Chris)
add warning for active pipes w/o fbs (Chris)
clean up num_pipes checks in fbdev_init and fbdev_restore_mode (Chris)
move i915.fastboot into fbdev_init (Chris)
v11:make BIOS connector config usage unconditional (Daniel)
v12:fix up fb vs pipe size checking (Chris)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This should allow BIOS fb inheritance to work on ILK+ machines too.
v2: handle tiled BIOS fbs (Kristian)
split out common bits (Jesse)
v3: alloc fb obj out in _init
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Read out the current plane configuration at init time into a new
plane_config structure. This allows us to track any existing
framebuffers attached to the plane and potentially re-use them in our
fbdev code for a smooth handoff.
v2: update for new pitch_for_width function (Jesse)
comment how get_plane_config works with shared fbs (Jesse)
v3: s/ARGB/XRGB (Ville)
use pipesrc width/height (Ville)
fix fourcc comment (Bob)
use drm_format_plane_cpp (Ville)
v4: use fb for tracking fb data object (Ville)
v5: fix up gen2 pitch limits (Ville)
v6: read out stride as well (Daniel)
v7: split out init ordering changes (Daniel)
don't fetch config if !CONFIG_FB
v8: use proper height in get_plane_config (Chris)
v9: fix CONFIG_FB check for modular configs (Jani)
v10: add comment about stolen allocation stomping
v11: drop hw state readout hunk (Daniel)
v12: handle tiled BIOS fbs (Kristian)
pull out common bits (Jesse)
v13: move fb obj alloc out to _init
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Early at init time, we can try to read out the plane config structure
and try to preserve it if possible.
v2: alloc fb obj at init time after fetching plane config
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't always want to write into main memory with pwrite. The shmem
fast path in particular is used for memory that is cacheable - under
such circumstances forcing the cache eviction is undesirable. As we will
always flush the cache when targeting incoherent buffers, we can rely on
that second pass to apply the cache coherency rules and so benefit from
in-cache copies otherwise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We used to lock individual pages inside the buffer object and so needed
to update the page flags every time. However, we now pin the pages into
the object for the duration of the pwrite/pread (and hopefully much
longer) and so we can forgo the flag updates until we release all the
pages.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Brad Volkin <bradley.d.volkin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris suggested to split things up a bit into the different parts of
the driver and also sort it all correctly, with the hope that we're
trying to organize things a bit better eventually. It should also
help newcomers to orient themselves a bit better.
v2:
- Move intel_pm.c to the core - to make things perfect we should split
out the modeset related pm features (psr/fbc) into a separate file.
Maybe something Rodrigo can do once the PSR patches have settled.
- Split the modesetting sections into core and encoders/outputs.
intel_ddi.c is a bit funky since it has core hsw+ support and ddi
output support. Whatever.
v3: Failed to git add ...
v4: Really go ocd, i.e. spelling fix in a comment from Jani.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The command parser scans batch buffers submitted via execbuffer ioctls before
the driver submits them to hardware. At a high level, it looks for several
things:
1) Commands which are explicitly defined as privileged or which should only be
used by the kernel driver. The parser generally rejects such commands, with
the provision that it may allow some from the drm master process.
2) Commands which access registers. To support correct/enhanced userspace
functionality, particularly certain OpenGL extensions, the parser provides a
whitelist of registers which userspace may safely access (for both normal and
drm master processes).
3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The
parser always rejects such commands.
See the overview comment in the source for more details.
This patch only implements the logic. Subsequent patches will build the tables
that drive the parser.
v2: Don't set the secure bit if the parser succeeds
Fail harder during init
Makefile cleanup
Kerneldoc cleanup
Clarify module param description
Convert ints to bools in a few places
Move client/subclient defs to i915_reg.h
Remove the bits_count field
OTC-Tracker: AXIA-4631
Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The command parser is going to need the same synchronization and
setup logic, so factor it out for reuse.
v2: Add a check that the object is backed by shmem
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make sure the line_time_us isn't zero in the gmch watermarks code as
that would cause a div by zero. This can be triggered by specifying
a very fast pixel clock for the mode.
At some point we should probably just switch over to using the same
math we use on PCH platforms which avoids such intermediate rounded
results.
Also we should verify the user provided mode much more rigorously.
At the moment we accept pretty much anything.
Note that "very fast mode" here means above 74.25 GHz.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add Ville's clarification of what "very fast" means.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on an early draft from Jesse.
Add support for powering on/off the dynamic power wells on VLV by
registering its display and dpio dynamic power wells with the power
domain framework.
For now power on all PHY TX lanes regardless of the actual lane
configuration. Later this can be optimized when the PHY side setup
enables only the required lanes. Atm, it enables all lanes in all
cases.
v2:
- undef function local COND macro after its last use (Ville)
- Take dev_priv->irq_lock around the whole sequence of
intel_set_cpu_fifo_underrun_reporting_nolock() and
valleyview_disable_display_irqs(). They are short and releasing
the lock in between only makes proving correctness more difficult.
- sanitize local var names in vlv_power_well_enabled()
v3:
- rebase on latest -nightly
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict due to my changes in the previous patch.
Also throw in an assert_spin_locked for safety. And finally appease
checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Needed by the next patch, wanting to set the underrun reporting as part
of a bigger dev_priv->irq_lock'ed sequence.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Use more customary __ prefix instead of _nolock postfix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We'll need to disable/re-enable the display-side IRQs when turning
off/on the VLV display power well. Factor out the helper functions
for this. For now keep the display IRQs enabled by default, so the
functionality doesn't change. This will be changed to enable/disable
the IRQs on-demand when adding support for VLV power wells in an
upcoming patch.
v2:
- take the irq spin lock for the whole enable/disable sequence as
these can be called with interrupts enabled
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested by Daniel.
v2:
- sanitize the state checking condition, the original was rather
confusing (partly due to the unfortunate naming of
i915.disable_power_well) (Ville)
- simpler message+backtrace generation by using WARN instead of WARN_ON
(Ville)
- check if always-on power wells are truly on all the time
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need to do the same for other platforms in upcoming patches.
v2:
- s/p/pipe (Ville)
- Call the new helper with the vbl_lock already held. The part it
protects is short, so releasing it between pipes only makes proving
correctness more difficult.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with Damien's s/p/pipe/ change.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the upcoming patches we'll need to access the rest of the fields in
the punit power gating register, so prepare for that.
v2:
- add doc reference for the power well subsystem IDs (Jesse)
- remove IDs for non-existant DPIO_RX[23] subsystems (Jesse)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a left-over from
commit b7e634cc8d
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Feb 4 21:35:45 2014 +0200
drm/i915: vlv: don't unmask IIR[DISPLAY_PIPE_A/B_VBLANK] interrupt
where we stopped unmasking the vblank IRQs, but left them enabled in the
IER register. Disable them in IER too.
v2:
- remove comment becoming stale after this change (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can read out the pipe HW state only if the required power domain is
on. If not we consider the pipe to be off.
v2:
- no change
v3:
- push down the power domain checks into the specific crtc
get_pipe_config handlers (Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the encoder is tied to its port, we need to make sure the power
domain for that port is on before reading out the encoder HW state.
Note that this also covers also all connector get_hw_state handlers,
since all those just call the corresponding encoder get_hw_state
handler, which checks - after this change - for all power domains
the connector needs.
v2:
- no change
v3:
- push down the power domain checks into the specific encoder
get_hw_state handlers (Daniel)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The connector detect and get_mode handlers need to access the port
specific HW blocks to read the EDID etc. Get/put the port power domains
around these handlers.
v2:
- get port power domain for HDMI too (Ville)
- get port power domain for the DP,HDMI audio detect handlers (Jesse)
- Leave the intel_runtime_pm_get/put in the DP detect function in place.
Instead of just removing them, these should be moved to the appropriate
power_well enable/disable handlers. We can do this after Paulo's
'Merge PC8 with runtime PM, v2' patchset.
v3:
- rebased on latest -nightly
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Parts that poke port specific HW blocks like the encoder HW state
readout or connector hotplug detect code need a way to check whether
required power domains are on or enable/disable these. For this purpose
add a set of power domains that refer to the port HW blocks. Get the
proper port power domains during modeset.
For now when requesting the power domain for a DDI port get it for a 4
lane configuration. This can be optimized later to request only the 2
lane power domain, when proper support is added on the VLV PHY side for
this. Atm, the PHY setup code assumes a 4 lane config in all cases.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reading code free of special cases wins over the small overhead of
calling a noop handler. Suggested by Jesse.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Split the 'set' power well handler into an 'enable', 'disable' and
'sync_hw' handler. This maps more conveniently to higher level
operations, for example it allows us to push the hsw package c8 handling
into the corresponding hsw/bdw enable/disable handlers and the hsw BIOS
hand-over setting into the hsw/bdw sync_hw handler.
No functional change.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Appease checkpatch's whitespace complaints.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Whenever we request a power domain it has to guarantee that all HW
resources are enabled that are needed to access a HW register associated
with that power domain. In case a register is on an always-on power well
this won't result in turning on a power well, but it may require
enabling some other HW resource. One such resource is the HSW/BDW device
D0 state that is required for all register accesses and thus for all
power wells/power domains.
So far the init power domain (guaranteeing access to all HW registers)
was part of the default i9xx always-on power well, but not the HSW/BDW
always-on power wells. Add the domain to the latter power wells too.
Atm, all the always-on power wells have noop handlers, so this doesn't
change the functionality.
v2:
- clarify semantics of always-on power wells (Paulo)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These macros are used only locally, so move them to the .c file.
No functional change.
v2:
- add init power domain to always-on power wells in the following
- separate - patch (Paulo)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There are too many oustanding issues:
- Fence handling in the current code is broken. There's a patch series
from me, but it's blocked on and extended review (which includes
writing the testcases).
- IOMMU mapping handling is broken, we need to properly refcount it -
currently it gets destroyed when the first vma is unbound, so way
too early.
- There's a pending reset issue on snb. Since Mika's reset work and
full ppgtt have been pulled in in separate branches and ended up
intermittingly breaking each another it's unclear who's the exact
culprit here.
- We still have persistent evidince of crazy recursion bugs through
vma_unbind and ppgtt_relase, e.g.
https://bugs.freedesktop.org/show_bug.cgi?id=73383
This issue (and a few others meanwhile resolved) have blocked our
performance measuring/tuning group since 3 months.
- Secure batch dispatching is broken. This is blocking Brad Volkin's
command checker work since 3 months.
All these issues are confirmed to only happen when full ppgtt is
enabled, falling back to aliasing ppgtt resolves them. But even
aliasing ppgtt itself still has a regression:
- We currently unconditionally bind objects into the aliasing ppgtt,
which means all priviledged objects like ringbuffers are visible to
unpriviledged access again. On top of that this also breaks the
command checker for aliasing ppgtt, since it can't hide the
validated batch any more.
Furthermore topic/full-ppgtt has never been reviewed:
- Lifetime rules around vma unbinding/release are unclear, resulting
into this awesome hack called ppgtt_release. Which seems to take the
blame for most of the recursion fallout.
- Context/ring init works different on gpu reset than anywhere else.
Such differeneces have in the past always lead to really hard to
track down bugs.
- Aliasing ppgtt is treated in a bunch of places as a real address
space, but it isn't - the real address space is always the global
gtt in that case. This results in a bit a mess between contexts and
ppgtt object, further complication the context/ppgtt/vma lifetime
rules.
- We don't have any docs describing the overall concepts introduced
with full ppgtt. A short, concise overview describing vmas and some
of the strange bits around them (like the unbound vmas used by
execbuf, or the new binding rules) really is needed.
Note that a lot of the post topic/full-ppgtt merge fallout has already
been addressed, this entire list here of 10 issues really only contains
the still outstanding issues.
Finally the 3.15 merge window is approaching and I think we need to
use the remaining time to ensure that our fallback option of using
aliasing ppgtt is in solid shape. Hence I think it's time to throw the
switch. While at it demote the helper from static inline status
because really.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These functions will be needed by the valleyview specific power well
update functionality added in an upcoming patch, so move them earlier.
No functional change.
v2:
- no change
v3:
- rebase on latest -nightly
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
These functions are used only by a single call site and are simple
enough to just fold them in.
Note that in later patches the parts folded in here are further
simplified as we'll remove hsw_{disable,enable}_package_c8 and the NULL
check of the power well enable/disable handlers. All this means that at
the end intel_display_power_get/put() becomes more understandable as we
don't need to jump between two functions when reading the code.
No functional change.
v2:
- clarify the rational for the change (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
one more radeon fix.
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/atom: select the proper number of lanes in transmitter setup
