Commit graph

339 commits

Author SHA1 Message Date
Linus Torvalds
ece8e0b2f9 Merge branch 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull async changes from Tejun Heo:
 "These are followups for the earlier deadlock issue involving async
  ending up waiting for itself through block requesting module[1].  The
  following changes are made by these commits.

   - Instead of requesting default elevator on each request_queue init,
     block now requests it once early during boot.

   - Kmod triggers warning if invoked from an async worker.

   - Async synchronization implementation has been reimplemented.  It's
     a lot simpler now."

* 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  async: initialise list heads to fix crash
  async: replace list of active domains with global list of pending items
  async: keep pending tasks on async_domain and remove async_pending
  async: use ULLONG_MAX for infinity cookie value
  async: bring sanity to the use of words domain and running
  async, kmod: warn on synchronous request_module() from async workers
  block: don't request module during elevator init
  init, block: try to load default elevator module early during boot
2013-02-19 22:10:26 -08:00
Linus Torvalds
bdb0ae6a76 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
 "This is a collection of miscellaneous fixes, the most important one is
  the fix for the Samsung laptop bricking issue (auto-blacklisting the
  samsung-laptop driver); the efi_enabled() changes you see below are
  prerequisites for that fix.

  The other issues fixed are booting on OLPC XO-1.5, an UV fix, NMI
  debugging, and requiring CAP_SYS_RAWIO for MSR references, just as
  with I/O port references."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  samsung-laptop: Disable on EFI hardware
  efi: Make 'efi_enabled' a function to query EFI facilities
  smp: Fix SMP function call empty cpu mask race
  x86/msr: Add capabilities check
  x86/dma-debug: Bump PREALLOC_DMA_DEBUG_ENTRIES
  x86/olpc: Fix olpc-xo1-sci.c build errors
  arch/x86/platform/uv: Fix incorrect tlb flush all issue
  x86-64: Fix unwind annotations in recent NMI changes
  x86-32: Start out cr0 clean, disable paging before modifying cr3/4
2013-01-31 17:08:43 +11:00
Matt Fleming
83e6818974 efi: Make 'efi_enabled' a function to query EFI facilities
Originally 'efi_enabled' indicated whether a kernel was booted from
EFI firmware. Over time its semantics have changed, and it now
indicates whether or not we are booted on an EFI machine with
bit-native firmware, e.g. 64-bit kernel with 64-bit firmware.

The immediate motivation for this patch is the bug report at,

    https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557

which details how running a platform driver on an EFI machine that is
designed to run under BIOS can cause the machine to become
bricked. Also, the following report,

    https://bugzilla.kernel.org/show_bug.cgi?id=47121

details how running said driver can also cause Machine Check
Exceptions. Drivers need a new means of detecting whether they're
running on an EFI machine, as sadly the expression,

    if (!efi_enabled)

hasn't been a sufficient condition for quite some time.

Users actually want to query 'efi_enabled' for different reasons -
what they really want access to is the list of available EFI
facilities.

For instance, the x86 reboot code needs to know whether it can invoke
the ResetSystem() function provided by the EFI runtime services, while
the ACPI OSL code wants to know whether the EFI config tables were
mapped successfully. There are also checks in some of the platform
driver code to simply see if they're running on an EFI machine (which
would make it a bad idea to do BIOS-y things).

This patch is a prereq for the samsung-laptop fix patch.

Cc: David Airlie <airlied@linux.ie>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Peter Jones <pjones@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-30 11:51:59 -08:00
Tejun Heo
c14afb82ff Merge branch 'master' into for-3.9-async
To receive f56c3196f2 ("async: fix
__lowest_in_progress()").

Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-23 09:31:01 -08:00
Tejun Heo
bb813f4c93 init, block: try to load default elevator module early during boot
This patch adds default module loading and uses it to load the default
block elevator.  During boot, it's called right after initramfs or
initrd is made available and right before control is passed to
userland.  This ensures that as long as the modules are available in
the usual places in initramfs, initrd or the root filesystem, the
default modules are loaded as soon as possible.

This will replace the on-demand elevator module loading from elevator
init path.

v2: Fixed build breakage when !CONFIG_BLOCK.  Reported by kbuild test
    robot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Fengguang We <fengguang.wu@intel.com>
2013-01-18 14:05:56 -08:00
Vineet Gupta
f80b0c904d Ensure that kernel_init_freeable() is not inlined into non __init code
Commit d6b2123802 "make sure that we always have a return path from
kernel_execve()" reshuffled kernel_init()/init_post() to ensure that
kernel_execve() has a caller to return to.

It removed __init annotation for kernel_init() and introduced/calls a
new routine kernel_init_freeable(). Latter however is inlined by any
reasonable compiler (ARC gcc 4.4 in this case), causing slight code
bloat.

This patch forces kernel_init_freeable() as noinline reducing the .text

bloat-o-meter vmlinux vmlinux_new
add/remove: 1/0 grow/shrink: 0/1 up/down: 374/-334 (40)
function                        old     new   delta
kernel_init_freeable              -     374    +374 (.init.text)
kernel_init                     628     294    -334 (.text)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-26 01:14:12 -05:00
Linus Torvalds
54d46ea993 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull signal handling cleanups from Al Viro:
 "sigaltstack infrastructure + conversion for x86, alpha and um,
  COMPAT_SYSCALL_DEFINE infrastructure.

  Note that there are several conflicts between "unify
  SS_ONSTACK/SS_DISABLE definitions" and UAPI patches in mainline;
  resolution is trivial - just remove definitions of SS_ONSTACK and
  SS_DISABLED from arch/*/uapi/asm/signal.h; they are all identical and
  include/uapi/linux/signal.h contains the unified variant."

Fixed up conflicts as per Al.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  alpha: switch to generic sigaltstack
  new helpers: __save_altstack/__compat_save_altstack, switch x86 and um to those
  generic compat_sys_sigaltstack()
  introduce generic sys_sigaltstack(), switch x86 and um to it
  new helper: compat_user_stack_pointer()
  new helper: restore_altstack()
  unify SS_ONSTACK/SS_DISABLE definitions
  new helper: current_user_stack_pointer()
  missing user_stack_pointer() instances
  Bury the conditionals from kernel_thread/kernel_execve series
  COMPAT_SYSCALL_DEFINE: infrastructure
2012-12-20 18:05:28 -08:00
Al Viro
ae903caae2 Bury the conditionals from kernel_thread/kernel_execve series
All architectures have
	CONFIG_GENERIC_KERNEL_THREAD
	CONFIG_GENERIC_KERNEL_EXECVE
	__ARCH_WANT_SYS_EXECVE
None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers
of kernel_execve() (which is a trivial wrapper for do_execve() now) left.
Kill the conditionals and make both callers use do_execve().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-12-19 18:07:38 -05:00
Linus Torvalds
6a2b60b17b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "While small this set of changes is very significant with respect to
  containers in general and user namespaces in particular.  The user
  space interface is now complete.

  This set of changes adds support for unprivileged users to create user
  namespaces and as a user namespace root to create other namespaces.
  The tyranny of supporting suid root preventing unprivileged users from
  using cool new kernel features is broken.

  This set of changes completes the work on setns, adding support for
  the pid, user, mount namespaces.

  This set of changes includes a bunch of basic pid namespace
  cleanups/simplifications.  Of particular significance is the rework of
  the pid namespace cleanup so it no longer requires sending out
  tendrils into all kinds of unexpected cleanup paths for operation.  At
  least one case of broken error handling is fixed by this cleanup.

  The files under /proc/<pid>/ns/ have been converted from regular files
  to magic symlinks which prevents incorrect caching by the VFS,
  ensuring the files always refer to the namespace the process is
  currently using and ensuring that the ptrace_mayaccess permission
  checks are always applied.

  The files under /proc/<pid>/ns/ have been given stable inode numbers
  so it is now possible to see if different processes share the same
  namespaces.

  Through the David Miller's net tree are changes to relax many of the
  permission checks in the networking stack to allowing the user
  namespace root to usefully use the networking stack.  Similar changes
  for the mount namespace and the pid namespace are coming through my
  tree.

  Two small changes to add user namespace support were commited here adn
  in David Miller's -net tree so that I could complete the work on the
  /proc/<pid>/ns/ files in this tree.

  Work remains to make it safe to build user namespaces and 9p, afs,
  ceph, cifs, coda, gfs2, ncpfs, nfs, nfsd, ocfs2, and xfs so the
  Kconfig guard remains in place preventing that user namespaces from
  being built when any of those filesystems are enabled.

  Future design work remains to allow root users outside of the initial
  user namespace to mount more than just /proc and /sys."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (38 commits)
  proc: Usable inode numbers for the namespace file descriptors.
  proc: Fix the namespace inode permission checks.
  proc: Generalize proc inode allocation
  userns: Allow unprivilged mounts of proc and sysfs
  userns: For /proc/self/{uid,gid}_map derive the lower userns from the struct file
  procfs: Print task uids and gids in the userns that opened the proc file
  userns: Implement unshare of the user namespace
  userns: Implent proc namespace operations
  userns: Kill task_user_ns
  userns: Make create_new_namespaces take a user_ns parameter
  userns: Allow unprivileged use of setns.
  userns: Allow unprivileged users to create new namespaces
  userns: Allow setting a userns mapping to your current uid.
  userns: Allow chown and setgid preservation
  userns: Allow unprivileged users to create user namespaces.
  userns: Ignore suid and sgid on binaries if the uid or gid can not be mapped
  userns: fix return value on mntns_install() failure
  vfs: Allow unprivileged manipulation of the mount namespace.
  vfs: Only support slave subtrees across different user namespaces
  vfs: Add a user namespace reference from struct mnt_namespace
  ...
2012-12-17 15:44:47 -08:00
Linus Torvalds
11520e5e7c Revert "x86-64/efi: Use EFI to deal with platform wall clock (again)"
This reverts commit bd52276fa1 ("x86-64/efi: Use EFI to deal with
platform wall clock (again)"), and the two supporting commits:

  da5a108d05: "x86/kernel: remove tboot 1:1 page table creation code"

  185034e72d: "x86, efi: 1:1 pagetable mapping for virtual EFI calls")

as they all depend semantically on commit 53b87cf088 ("x86, mm:
Include the entire kernel memory map in trampoline_pgd") that got
reverted earlier due to the problems it caused.

This was pointed out by Yinghai Lu, and verified by me on my Macbook Air
that uses EFI.

Pointed-out-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-15 15:20:41 -08:00
Linus Torvalds
d42b3a2906 Merge branch 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 EFI update from Peter Anvin:
 "EFI tree, from Matt Fleming.  Most of the patches are the new efivarfs
  filesystem by Matt Garrett & co.  The balance are support for EFI
  wallclock in the absence of a hardware-specific driver, and various
  fixes and cleanups."

* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  efivarfs: Make efivarfs_fill_super() static
  x86, efi: Check table header length in efi_bgrt_init()
  efivarfs: Use query_variable_info() to limit kmalloc()
  efivarfs: Fix return value of efivarfs_file_write()
  efivarfs: Return a consistent error when efivarfs_get_inode() fails
  efivarfs: Make 'datasize' unsigned long
  efivarfs: Add unique magic number
  efivarfs: Replace magic number with sizeof(attributes)
  efivarfs: Return an error if we fail to read a variable
  efi: Clarify GUID length calculations
  efivarfs: Implement exclusive access for {get,set}_variable
  efivarfs: efivarfs_fill_super() ensure we clean up correctly on error
  efivarfs: efivarfs_fill_super() ensure we free our temporary name
  efivarfs: efivarfs_fill_super() fix inode reference counts
  efivarfs: efivarfs_create() ensure we drop our reference on inode on error
  efivarfs: efivarfs_file_read ensure we free data in error paths
  x86-64/efi: Use EFI to deal with platform wall clock (again)
  x86/kernel: remove tboot 1:1 page table creation code
  x86, efi: 1:1 pagetable mapping for virtual EFI calls
  x86, mm: Include the entire kernel memory map in trampoline_pgd
  ...
2012-12-14 10:08:40 -08:00
Lai Jiangshan
3c466d46a9 init: use N_MEMORY instead N_HIGH_MEMORY
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:33 -08:00
Eric W. Biederman
1c4042c29b pidns: Consolidate initialzation of special init task state
Instead of setting child_reaper and SIGNAL_UNKILLABLE one way
for the system init process, and another way for pid namespace
init processes test pid->nr == 1 and use the same code for both.

For the global init this results in SIGNAL_UNKILLABLE being set
much earlier in the initialization process.

This is a small cleanup and it paves the way for allowing unshare and
enter of the pid namespace as that path like our global init also will
not set CLONE_NEWPID.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-11-19 05:59:15 -08:00
David Howells
eded09ccf5 FRV: gcc-4.1.2 also inlines weak functions
gcc-4.1.2 inlines weak functions, which causes FRV to fail when the dummy
thread_info_cache_init() gets inlined into start_kernel().

Signed-off-by: David Howells <dhowells@redhat.com>
2012-11-02 13:20:42 +00:00
Jan Beulich
bd52276fa1 x86-64/efi: Use EFI to deal with platform wall clock (again)
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.

Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).

Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).

Also make the two EFI functions in question here static -
they're not being referenced elsewhere.

History:

    This commit was originally merged as bacef661ac ("x86-64/efi:
    Use EFI to deal with platform wall clock") but it resulted in some
    ASUS machines no longer booting due to a firmware bug, and so was
    reverted in f026cfa82f. A pre-emptive fix for the buggy ASUS
    firmware was merged in 03a1c254975e ("x86, efi: 1:1 pagetable
    mapping for virtual EFI calls") so now this patch can be
    reapplied.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com> [added commit history]
2012-10-30 10:39:20 +00:00
Linus Torvalds
4e21fc138b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull third pile of kernel_execve() patches from Al Viro:
 "The last bits of infrastructure for kernel_thread() et.al., with
  alpha/arm/x86 use of those.  Plus sanitizing the asm glue and
  do_notify_resume() on alpha, fixing the "disabled irq while running
  task_work stuff" breakage there.

  At that point the rest of kernel_thread/kernel_execve/sys_execve work
  can be done independently for different architectures.  The only
  pending bits that do depend on having all architectures converted are
  restrictred to fs/* and kernel/* - that'll obviously have to wait for
  the next cycle.

  I thought we'd have to wait for all of them done before we start
  eliminating the longjump-style insanity in kernel_execve(), but it
  turned out there's a very simple way to do that without flagday-style
  changes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  alpha: switch to saner kernel_execve() semantics
  arm: switch to saner kernel_execve() semantics
  x86, um: convert to saner kernel_execve() semantics
  infrastructure for saner ret_from_kernel_thread semantics
  make sure that kernel_thread() callbacks call do_exit() themselves
  make sure that we always have a return path from kernel_execve()
  ppc: eeh_event should just use kthread_run()
  don't bother with kernel_thread/kernel_execve for launching linuxrc
  alpha: get rid of switch_stack argument of do_work_pending()
  alpha: don't bother passing switch_stack separately from regs
  alpha: take SIGPENDING/NOTIFY_RESUME loop into signal.c
  alpha: simplify TIF_NEED_RESCHED handling
2012-10-13 10:05:52 +09:00
Al Viro
a74fb73c12 infrastructure for saner ret_from_kernel_thread semantics
* allow kernel_execve() leave the actual return to userland to
caller (selected by CONFIG_GENERIC_KERNEL_EXECVE).  Callers
updated accordingly.
* architecture that does select GENERIC_KERNEL_EXECVE in its
Kconfig should have its ret_from_kernel_thread() do this:
	call schedule_tail
	call the callback left for it by copy_thread(); if it ever
returns, that's because it has just done successful kernel_execve()
	jump to return from syscall
IOW, its only difference from ret_from_fork() is that it does call the
callback.
* such an architecture should also get rid of ret_from_kernel_execve()
and __ARCH_WANT_KERNEL_EXECVE

This is the last part of infrastructure patches in that area - from
that point on work on different architectures can live independently.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-12 13:35:07 -04:00
Al Viro
d6b2123802 make sure that we always have a return path from kernel_execve()
The only place where kernel_execve() is called without a way to
return to the caller of kernel_thread() callback is kernel_post().
Reorganize kernel_init()/kernel_post() - instead of the former
calling the latter in the end (and getting freed by it), have the
latter *begin* with calling the former (and turn the latter into
kernel_thread() callback, of course).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-11 21:42:35 -04:00
Michel Lespinasse
147e615f83 prio_tree: remove
After both prio_tree users have been converted to use red-black trees,
there is no need to keep around the prio tree library anymore.

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:40 +09:00
Josh Triplett
2223af3890 efi: Fix the ACPI BGRT driver for images located in EFI boot services memory
The ACPI BGRT driver accesses the BIOS logo image when it initializes.
However, ACPI 5.0 (which introduces the BGRT) recommends putting the
logo image in EFI boot services memory, so that the OS can reclaim that
memory.  Production systems follow this recommendation, breaking the
ACPI BGRT driver.

Move the bulk of the BGRT code to run during a new EFI late
initialization phase, which occurs after switching EFI to virtual mode,
and after initializing ACPI, but before freeing boot services memory.
Copy the BIOS logo image to kernel memory at that point, and make it
accessible to the BGRT driver.  Rework the existing ACPI BGRT driver to
act as a simple wrapper exposing that image (and the properties from the
BGRT) via sysfs.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/93ce9f823f1c1f3bb88bdd662cce08eee7a17f5d.1348876882.git.josh@joshtriplett.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29 12:21:03 -07:00
Josh Triplett
785107923a efi: Defer freeing boot services memory until after ACPI init
Some new ACPI 5.0 tables reference resources stored in boot services
memory, so keep that memory around until we have ACPI and can extract
data from it.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/baaa6d44bdc4eb0c58e5d1b4ccd2c729f854ac55.1348876882.git.josh@joshtriplett.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29 12:21:01 -07:00
H. Peter Anvin
f026cfa82f Revert "x86-64/efi: Use EFI to deal with platform wall clock"
This reverts commit bacef661ac.

This commit has been found to cause serious regressions on a number of
ASUS machines at the least.  We probably need to provide a 1:1 map in
addition to the EFI virtual memory map in order for this to work.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reported-and-bisected-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu
2012-08-14 09:58:25 -07:00
Jiang Liu
9adb62a5df mm/hotplug: correctly setup fallback zonelists when creating new pgdat
When hotadd_new_pgdat() is called to create new pgdat for a new node, a
fallback zonelist should be created for the new node.  There's code to try
to achieve that in hotadd_new_pgdat() as below:

	/*
	 * The node we allocated has no zone fallback lists. For avoiding
	 * to access not-initialized zonelist, build here.
	 */
	mutex_lock(&zonelists_mutex);
	build_all_zonelists(pgdat, NULL);
	mutex_unlock(&zonelists_mutex);

But it doesn't work as expected.  When hotadd_new_pgdat() is called, the
new node is still in offline state because node_set_online(nid) hasn't
been called yet.  And build_all_zonelists() only builds zonelists for
online nodes as:

        for_each_online_node(nid) {
                pg_data_t *pgdat = NODE_DATA(nid);

                build_zonelists(pgdat);
                build_zonelist_cache(pgdat);
        }

Though we hope to create zonelist for the new pgdat, but it doesn't.  So
add a new parameter "pgdat" the build_all_zonelists() to build pgdat for
the new pgdat too.

Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Keping Chen <chenkeping@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:44 -07:00
Linus Torvalds
43a1141b9f Trivial comment changes to cpumask code. I guess it's getting boring.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQEdqBAAoJENkgDmzRrbjxMOAP/2M865eLJlTAfBlJI7UfLHGw
 vvB8GVXDLPVIxeDSVcpnbDPNMmtUvf0us4+omGMRVoUeD+lw9PSHq/Q+i5FM//Bn
 RhP9H8zilYjU0zH1H2kpXh1IJNeRmWVk/H2uwFhQlyiR0sTgT4TXVc1nAaGInpAb
 k7R8/t7M+fw7nq8HTMaX754/+RSWfbuaKOY6GSg2H/r5VXfUWftODD+ojZsRF/JM
 YcriA13qqllVgVUc11uhNkvd8zZDUQeYu3QZNGJiZ0xaxsqBdRxyVw4ES2b6X46N
 nDLBWIXpzWaaa+9VXbAys3S3wTR4b4oZba6GxFyRj7iZ606+ETRVcfcKV3d/xOnW
 Q+sj3ddq85Ivd+SvHtiuW5RAZY+DFrb4l4ApBw97QxhuVgZWNg1thWgQQF6dxyKj
 6cbwa/2gsKSVo53hOZcEH0yUjPBk4G6/8TRH/KgdvZPH618y+npMtHKEcrbjmjl9
 IV1wK9lOt7O0zWuUsn8ao5EfxCKInCqZdBmjSoLigupCLSSfby2m7Cw0MQlcONVd
 GaheUzVf+L8ZcyJxKz+4Wfy0Oc9+gs/mTqbpAZzTgztNAjpb8c3ZbojqXxpGAwFH
 N749ix0X5urTH/odcGYVna3sNUtHrjUAWYNeUf+AD/0DIjLYNIREOqhTAttPZRGQ
 JCT22yNnVHZSm2e8gOR/
 =XxF4
 -----END PGP SIGNATURE-----

Merge tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

Pull cpumask changes from Rusty Russell:
 "Trivial comment changes to cpumask code.  I guess it's getting boring."

Boring is good.

* tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  cpumask: cpulist_parse() comments correction
  init: add comments to keep initcall-names in sync with initcall levels
  cpumask: add a few comments of cpumask functions
2012-07-27 08:34:16 -07:00
Jim Cromie
96263d2863 init: add comments to keep initcall-names in sync with initcall levels
main.c has initcall_level_names[] for parse_args to print in debug messages,
add comments to keep them in sync with initcalls defined in init.h.

Also add "loadable" into comment re not using *_initcall macros in
modules, to disambiguate from kernel/params.c and other builtins.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-07-27 09:29:42 +09:30
Linus Torvalds
0a2fe19ccc Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pul x86/efi changes from Ingo Molnar:
 "This tree adds an EFI bootloader handover protocol, which, once
  supported on the bootloader side, will make bootup faster and might
  result in simpler bootloaders.

  The other change activates the EFI wall clock time accessors on x86-64
  as well, instead of the legacy RTC readout."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Handover Protocol
  x86-64/efi: Use EFI to deal with platform wall clock
2012-07-26 13:13:25 -07:00
Al Viro
4a9d4b024a switch fput to task_work_add
... and schedule_work() for interrupt/kernel_thread callers
(and yes, now it *is* OK to call from interrupt).

We are guaranteed that __fput() will be done before we return
to userland (or exit).  Note that for fput() from a kernel
thread we get an async behaviour; it's almost always OK, but
sometimes you might need to have __fput() completed before
you do anything else.  There are two mechanisms for that -
a general barrier (flush_delayed_fput()) and explicit
__fput_sync().  Both should be used with care (as was the
case for fput() from kernel threads all along).  See comments
in fs/file_table.c for details.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-22 23:57:58 +04:00
Borislav Petkov
19efb72fdc init: Drop initcall level output
9fb48c744b ("params: add 3rd arg to option handler callback
signature") added similar lines to dmesg:

initlevel:0=early, 4 registered initcalls
initlevel:1=core, 31 registered initcalls
initlevel:2=postcore, 11 registered initcalls
initlevel:3=arch, 7 registered initcalls
initlevel:4=subsys, 40 registered initcalls
initlevel:5=fs, 30 registered initcalls
initlevel:6=device, 250 registered initcalls
initlevel:7=late, 35 registered initcalls

but they don't contain any info for the general user staring at dmesg.
I'm very doubtful the count of initcalls registered per level helps
anyone so drop that output completely.

Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-06-08 14:58:14 +09:30
Rusty Russell
ae82fdb140 module_param: stop double-calling parameters.
Commit 026cee0086 "params:
<level>_initcall-like kernel parameters" set old-style module
parameters to level 0.  And we call those level 0 calls where we used
to, early in start_kernel().

We also loop through the initcall levels and call the levelled
module_params before the corresponding initcall.  Unfortunately level
0 is early_init(), so we call the standard module_param calls twice.

(Turns out most things don't care, but at least ubi.mtd does).

Change the level to -1 for standard module_param calls.

Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
2012-06-08 14:58:13 +09:30
Jan Beulich
bacef661ac x86-64/efi: Use EFI to deal with platform wall clock
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.

Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).

Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).

Also make the two EFI functions in question here static -
they're not being referenced elsewhere.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FBFBF5F020000780008637F@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06 11:48:05 +02:00
Linus Torvalds
5d4e2d08e7 Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
 the 3.5-rc1 merge window.
 
 Outside of a few minor driver core changes, we ended up with the
 following different subsystem and core changes as well, due to
 interdependancies on the driver core:
  - hyperv driver updates
  - drivers/memory being created and some drivers moved into it
  - extcon driver subsystem created out of the old Android staging switch
    driver code
  - dynamic debug updates
  - printk rework, and /dev/kmsg changes
 
 All of this has been tested in the linux-next releases for a few weeks
 with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
 VOQAnAriySv397St36J6Hz5bMQZwB1Yq
 =SQc+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...
2012-05-22 16:02:13 -07:00
Linus Torvalds
31a67102f4 Fix blocking allocations called very early during bootup
During early boot, when the scheduler hasn't really been fully set up,
we really can't do blocking allocations because with certain (dubious)
configurations the "might_resched()" calls can actually result in
scheduling events.

We could just make such users always use GFP_ATOMIC, but quite often the
code that does the allocation isn't really aware of the fact that the
scheduler isn't up yet, and forcing that kind of random knowledge on the
initialization code is just annoying and not good for anybody.

And we actually have a the 'gfp_allowed_mask' exactly for this reason:
it's just that the kernel init sequence happens to set it to allow
blocking allocations much too early.

So move the 'gfp_allowed_mask' initialization from 'start_kernel()'
(which is some of the earliest init code, and runs with preemption
disabled for good reasons) into 'kernel_init()'.  kernel_init() is run
in the newly created thread that will become the 'init' process, as
opposed to the early startup code that runs within the context of what
will be the first idle thread.

So by the time we reach 'kernel_init()', we know that the scheduler must
be at least limping along, because we've already scheduled from the idle
thread into the init thread.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Rientjes <rientjes@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-21 12:52:42 -07:00
Greg Kroah-Hartman
eb1574270a Merge 3.4-rc5 into driver-core-next
This was done to resolve a merge issue with the init/main.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 14:33:37 -07:00
Jim Cromie
9fb48c744b params: add 3rd arg to option handler callback signature
Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:

  "Booting kernel" from start_kernel(),
  initcall_level_names[i] from do_initcall_level(),
  mod->name from load_module(), via parse_args(), parse_one()

parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above.  parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.

The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.

Minor tweaks:

Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.

Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level.  This adds 7 lines
to dmesg output, like:

   initlevel:6=device, 172 registered initcalls

Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above.  This array is passed into parse_args() by
do_initcall_level().

CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 14:05:27 -04:00
Chris Metcalf
a99cd11251 init: fix bug where environment vars can't be passed via boot args
Commit 026cee0086 had the side-effect of dropping the '=' from
the unknown boot arguments that are passed to init as environment
variables.  This is because parse_args() puts a NUL in the string
where the '=' was when it passes the "param" and "val" pointers
to the parsing subfunctions.  Previously, unknown_bootoption() was
the last parse_args() subfunction to run, and it carefully put back
the '=' character.  Now the ignore_unknown_bootoption() is the last
one to run, and it wasn't doing the necessary repair, so the
envp params ended up with the embedded NUL and were no longer
seen as valid environment variables by init.

Tested-by: Woody Suwalski <terraluna977@gmail.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-25 11:47:29 -04:00
Linus Torvalds
0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells
49a7f04a4b Move all declarations of free_initmem() to linux/mm.h
Move all declarations of free_initmem() to linux/mm.h so that there's only one
and it's used by everything.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-c6x-dev@linux-c6x.org
cc: microblaze-uclinux@itee.uq.edu.au
cc: linux-sh@vger.kernel.org
cc: sparclinux@vger.kernel.org
cc: x86@kernel.org
cc: linux-mm@kvack.org
2012-03-28 18:30:03 +01:00
Pawel Moll
026cee0086 params: <level>_initcall-like kernel parameters
This patch adds a set of macros that can be used to declare
kernel parameters to be parsed _before_ initcalls at a chosen
level are executed.  We rename the now-unused "flags" field of
struct kernel_param as the level.  It's signed, for when we
use this for early params as well, in future.

Linker macro collating init calls had to be modified in order
to add additional symbols between levels that are later used
by the init code to split the calls into blocks.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-03-26 12:50:51 +10:30
Linus Torvalds
69a7aebcf0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "It's indeed trivial -- mostly documentation updates and a bunch of
  typo fixes from Masanari.

  There are also several linux/version.h include removals from Jesper."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
  kcore: fix spelling in read_kcore() comment
  constify struct pci_dev * in obvious cases
  Revert "char: Fix typo in viotape.c"
  init: fix wording error in mm_init comment
  usb: gadget: Kconfig: fix typo for 'different'
  Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
  writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
  writeback: fix typo in the writeback_control comment
  Documentation: Fix multiple typo in Documentation
  tpm_tis: fix tis_lock with respect to RCU
  Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
  Doc: Update numastat.txt
  qla4xxx: Add missing spaces to error messages
  compiler.h: Fix typo
  security: struct security_operations kerneldoc fix
  Documentation: broken URL in libata.tmpl
  Documentation: broken URL in filesystems.tmpl
  mtd: simplify return logic in do_map_probe()
  mm: fix comment typo of truncate_inode_pages_range
  power: bq27x00: Fix typos in comment
  ...
2012-03-20 21:12:50 -07:00
Jim Cromie
7fa87ce726 init: fix wording error in mm_init comment
s/countinuous/contiguous/, reword sentence.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-15 15:54:58 +01:00
Thomas Gleixner
bd2f55361f sched/rt: Use schedule_preempt_disabled()
Coccinelle based conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:03 +01:00
Rusty Russell
2329abfa34 module_param: make bool parameters really bool (core code)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:18 +10:30
Linus Torvalds
d0b9706c20 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/numa: Add constraints check for nid parameters
  mm, x86: Remove debug_pagealloc_enabled
  x86/mm: Initialize high mem before free_all_bootmem()
  arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
  arch/x86/kernel/e820.c: Eliminate bubble sort from sanitize_e820_map()
  x86: Fix mmap random address range
  x86, mm: Unify zone_sizes_init()
  x86, mm: Prepare zone_sizes_init() for unification
  x86, mm: Use max_low_pfn for ZONE_NORMAL on 64-bit
  x86, mm: Wrap ZONE_DMA32 with CONFIG_ZONE_DMA32
  x86, mm: Use max_pfn instead of highend_pfn
  x86, mm: Move zone init from paging_init() on 64-bit
  x86, mm: Use MAX_DMA_PFN for ZONE_DMA on 32-bit
2012-01-11 19:12:10 -08:00
Stanislaw Gruszka
54c29c635a mm, x86: Remove debug_pagealloc_enabled
When (no)bootmem finish operation, it pass pages to buddy
allocator. Since debug_pagealloc_enabled is not set, we will do
not protect pages, what is not what we want with
CONFIG_DEBUG_PAGEALLOC=y.

To fix remove debug_pagealloc_enabled. That variable was
introduced by commit 12d6f21e "x86: do not PSE on
CONFIG_DEBUG_PAGEALLOC=y" to get more CPA (change page
attribude) code testing. But currently we have CONFIG_CPA_DEBUG,
which test CPA.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1322582711-14571-1-git-send-email-sgruszka@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 09:24:07 +01:00
Ming Lei
73839c5b2e init/main.c: Execute lockdep_init() as early as possible
This patch fixes a lockdep warning on ARM platforms:

  [    0.000000] WARNING: lockdep init error! Arch code didn't call lockdep_init() early enough?
  [    0.000000] Call stack leading to lockdep invocation was:
  [    0.000000]  [<c00164bc>] save_stack_trace_tsk+0x0/0x90
  [    0.000000]  [<ffffffff>] 0xffffffff

The warning is caused by printk inside smp_setup_processor_id().

It is safe to do this because lockdep_init() doesn't depend on
smp_setup_processor_id(), so improve things that printk can be
called as early as possible without lockdep complaint.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1321508072-23853-1-git-send-email-tom.leiming@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-06 08:16:53 +01:00
Linus Torvalds
b32fc0a062 Merge branch 'upstream/jump-label-noearly' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/jump-label-noearly' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  jump-label: initialize jump-label subsystem much earlier
  x86/jump_label: add arch_jump_label_transform_static()
  s390/jump-label: add arch_jump_label_transform_static()
  jump_label: add arch_jump_label_transform_static() to optimise non-live code updates
  sparc/jump_label: drop arch_jump_label_text_poke_early()
  x86/jump_label: drop arch_jump_label_text_poke_early()
  jump_label: if a key has already been initialized, don't nop it out
  stop_machine: make stop_machine safe and efficient to call early
  jump_label: use proper atomic_t initializer

Conflicts:
 - arch/x86/kernel/jump_label.c
	Added __init_or_module to arch_jump_label_text_poke_early vs
	removal of that function entirely
 - kernel/stop_machine.c
	same patch ("stop_machine: make stop_machine safe and efficient
	to call early") merged twice, with whitespace fix in one version
2011-11-06 20:20:46 -08:00
Michal Schmidt
b1e4d20cbf params: make dashes and underscores in parameter names truly equal
The user may use "foo-bar" for a kernel parameter defined as "foo_bar".
Make sure it works the other way around too.

Apply the equality of dashes and underscores on early_params and __setup
params as well.

The example given in Documentation/kernel-parameters.txt indicates that
this is the intended behaviour.

With the patch the kernel accepts "log-buf-len=1M" as expected.
https://bugzilla.redhat.com/show_bug.cgi?id=744545

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (neatened implementations)
2011-10-26 13:10:39 +10:30
Jeremy Fitzhardinge
97ce2c88f9 jump-label: initialize jump-label subsystem much earlier
Initialize jump_labels much, much earlier, so they're available for use
during system setup.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2011-10-25 11:55:15 -07:00
wangyanqing
b0f84374b6 bootup: move 'usermodehelper_enable()' a little earlier
Commit d5767c5353 ("bootup: move 'usermodehelper_enable()' to the end
of do_basic_setup()") moved 'usermodehelper_enable()' to end of
do_basic_setup() to after the initcalls.  But then I get failed to let
uvesafb work on my computer, and lose the splash boot.

So maybe we could start usermodehelper_enable a little early to make
some task work that need eary init with the help of user mode.

[ I would *really* prefer that initcalls not call into user space - even
  the real 'init' hasn't been execve'd yet, after all! But for uvesafb
  it really does look like we don't have much choice.

  I considered doing this when we mount the root filesystem, but
  depending on config options that is in multiple places.  We could do
  the usermode helper enable as a rootfs_initcall()..

  So I'm just using wang yanqing's trivial patch.  It's not wonderful,
  but it's simple and should work.  We should revisit this some day,
  though.      - Linus ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-29 19:21:01 -07:00
Linus Torvalds
d5767c5353 bootup: move 'usermodehelper_enable()' to the end of do_basic_setup()
Doing it just before starting to call into cpu_idle() made a sick kind
of sense only because the original bug we fixed (see commit
288d5abec8: "Boot up with usermodehelper disabled") was about problems
with some scheduler data structures not being initialized, and they had
better be initialized at that point.

But it really didn't make any other conceptual sense, and doing it after
the initial "schedule()" call for the idle thread actually opened up a
race: what if the main initialization thread did everything without
needing to sleep, and got all the way into user land too? Without
actually having scheduled back to the idle thread?

Now, in normal circumstances that doesn't ever happen, but it looks like
Richard Cochran triggered exactly that on his ARM IXP4xx machines:

  "I have some ARM IXP4xx based machines that use the two on chip MAC
   ports (aka NPEs).  The NPE needs a firmware in order to function.
   Ever since the following commit [that 288d5abec8 one], it is no
   longer possible to bring up the interfaces during the init scripts."

with a call trace showing an ioctl coming from user space. Richard says:

  "The init is busybox, and the startup script does mount, syslogd, and
   then ifup, so that all can go by quickly."

The fix is to move the usermodehelper_enable() into the main 'init'
thread, and just put it after we've done all our initcalls.  By then,
everything really should be up, but we've obviously not actually started
the user-mode portion of init yet.

Reported-and-tested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-28 10:23:44 -07:00