Commit graph

109359 commits

Author SHA1 Message Date
Jens Axboe
48fd4f93a0 block: submit_bh() inadvertently discards barrier flag on a sync write
Reported by Milan Broz <mbroz@redhat.com>, commit 18ce3751 inadvertently
made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix
that up.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
Adel Gadllah
a4a778971b block: clean up cmdfilter sysfs interface
This patch changes the interface of the cmd filter to use a +/-
notation like:

echo -- +0x02 +0x03 -0x08

If neither + or - is given it defaults to + (allow command).

Note: The interface was added in 2.6.17-rc1 and is unused and
undocumented so far so it's safe to change it.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: jens.axboe@oracle.com
Cc: James.Bottomley@hansenpartnership.com
Cc: dan.j.williams@intel.com
Cc: pjones@redhat.com
Cc: viro@zeniv.linux.org.uk
Cc: dougg@torque.net
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
FUJITA Tomonori
4beab5c623 block: rename blk_scsi_cmd_filter to blk_cmd_filter
Technically, the cmd_filter would be applied to other protocols though
it's unlikely to happen. Putting SCSI stuff to request_queue is kinda
layer violation. So let's rename it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
FUJITA Tomonori
14e507b852 sg: restore command permission for TYPE_SCANNER
sg allowed any command for TYPE_SCANNER. The cmd_filter patchset
doesn't. We can't change sg's permission since it might break the
existing software.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
FUJITA Tomonori
abf5439370 block: move cmdfilter from gendisk to request_queue
cmd_filter works only for the block layer SG_IO with SCSI block
devices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI
character devices (such as st). We hit a kernel crash with them.

The problem is that cmd_filter code accesses to gendisk (having struct
blk_scsi_cmd_filter) via inode->i_bdev->bd_disk. It works for only
SCSI block device files. With character device files, inode->i_bdev
leads you to struct cdev. inode->i_bdev->bd_disk->blk_scsi_cmd_filter
isn't safe.

SCSI ULDs don't expose gendisk; they keep it private. bsg needs to be
independent on any protocols. We shouldn't change ULDs to expose their
gendisk.

This patch moves struct blk_scsi_cmd_filter from gendisk to
request_queue, a common object, which eveyone can access to.

The user interface doesn't change; users can change the filters via
/sys/block/. gendisk has a pointer to request_queue so the cmd_filter
code accesses to struct blk_scsi_cmd_filter.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-27 09:50:19 +02:00
Steve VanDeBogart
2633f0e57b exit signals: use of uninitialized field notify_count
task->signal->notify_count is only initialized if
task->signal->group_exit_task is not NULL.  Reorder a conditional so
that uninitialised memory is not used.  Found by Valgrind.

Signed-off-by: Steve VanDeBogart <vandebo-lkml@nerdbox.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-27 09:10:09 +02:00
Zhu Yi
7487017282 lockdep: fix invalid list_del_rcu in zap_class
The problem is found during iwlagn driver testing on
v2.6.27-rc4-176-gb8e6c91 kernel, but it turns out to be a lockdep bug.
In our testing, we frequently load and unload the iwlagn driver
(>50 times). Then the MAX_STACK_TRACE_ENTRIES is reached (expected
behaviour?). The error message with the call trace is as below.

BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
Pid: 4895, comm: iwlagn Not tainted 2.6.27-rc4 #13

Call Trace:
 [<ffffffff81014aa1>] save_stack_trace+0x22/0x3e
 [<ffffffff8105390a>] save_trace+0x8b/0x91
 [<ffffffff81054e60>] mark_lock+0x1b0/0x8fa
 [<ffffffff81056f71>] __lock_acquire+0x5b9/0x716
 [<ffffffffa00d818a>] ieee80211_sta_work+0x0/0x6ea [mac80211]
 [<ffffffff81057120>] lock_acquire+0x52/0x6b
 [<ffffffff81045f0e>] run_workqueue+0x97/0x1ed
 [<ffffffff81045f5e>] run_workqueue+0xe7/0x1ed
 [<ffffffff81045f0e>] run_workqueue+0x97/0x1ed
 [<ffffffff81046ae4>] worker_thread+0xd8/0xe3
 [<ffffffff81049503>] autoremove_wake_function+0x0/0x2e
 [<ffffffff81046a0c>] worker_thread+0x0/0xe3
 [<ffffffff810493ec>] kthread+0x47/0x73
 [<ffffffff8128e3ab>] trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8100cea9>] child_rip+0xa/0x11
 [<ffffffff8100c4df>] restore_args+0x0/0x30
 [<ffffffff810316e1>] finish_task_switch+0x0/0xcc
 [<ffffffff810493a5>] kthread+0x0/0x73
 [<ffffffff8100ce9f>] child_rip+0x0/0x11

Although the above is harmless, when the ilwagn module is removed
later lockdep will trigger a kernel oops as below.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: [<ffffffff810531e1>] zap_class+0x24/0x82
PGD 73128067 PUD 7448c067 PMD 0
Oops: 0002 [1] SMP
CPU 0
Modules linked in: rfcomm l2cap bluetooth autofs4 sunrpc
nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header
ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand
acpi_cpufreq dm_mirror dm_log dm_multipath dm_mod snd_hda_intel sr_mod
snd_seq_dummy snd_seq_oss snd_seq_midi_event battery snd_seq
snd_seq_device cdrom button snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd_page_alloc e1000e snd_hwdep sg iTCO_wdt
iTCO_vendor_support ac pcspkr i2c_i801 i2c_core snd soundcore video
output ata_piix ata_generic libata sd_mod scsi_mod ext3 jbd mbcache
uhci_hcd ohci_hcd ehci_hcd [last unloaded: mac80211]
Pid: 4941, comm: modprobe Not tainted 2.6.27-rc4 #10
RIP: 0010:[<ffffffff810531e1>]  [<ffffffff810531e1>]
zap_class+0x24/0x82
RSP: 0000:ffff88007bcb3eb0  EFLAGS: 00010046
RAX: 0000000000068ee8 RBX: ffffffff8192a0a0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000001dfb RDI: ffffffff816e70b0
RBP: ffffffffa00cd000 R08: ffffffff816818f8 R09: ffff88007c923558
R10: ffffe20002ad2408 R11: ffffffff811028ec R12: ffffffff8192a0a0
R13: 000000000002bd90 R14: 0000000000000000 R15: 0000000000000296
FS:  00007f9d1cee56f0(0000) GS:ffffffff814a58c0(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 0000000073047000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 4941, threadinfo ffff88007bcb2000, task
ffff8800758d1fc0)
Stack:  ffffffff81057376 0000000000000000 ffffffffa00f7b00
0000000000000000
 0000000000000080 0000000000618278 00007fff24f16720 0000000000000000
 ffffffff8105d37a ffffffffa00f7b00 ffffffff8105d591 313132303863616d
Call Trace:
 [<ffffffff81057376>] ? lockdep_free_key_range+0x61/0xf5
 [<ffffffff8105d37a>] ? free_module+0xd4/0xe4
 [<ffffffff8105d591>] ? sys_delete_module+0x1de/0x1f9
 [<ffffffff8106dbfa>] ? audit_syscall_entry+0x12d/0x160
 [<ffffffff8100be2b>] ? system_call_fastpath+0x16/0x1b

Code: b2 00 01 00 00 00 c3 31 f6 49 c7 c0 10 8a 61 81 eb 32 49 39 38
75 26 48 98 48 6b c0 38 48 8b 90 08 8a 61 81 48 8b 88 00 8a 61 81 <48>
89 51 08 48 89 0a 48 c7 80 08 8a 61 81 00 02 20 00 48 ff c6
RIP  [<ffffffff810531e1>] zap_class+0x24/0x82
 RSP <ffff88007bcb3eb0>
CR2: 0000000000000008
---[ end trace a1297e0c4abb0f2e ]---

The root cause for this oops is in add_lock_to_list() when
save_trace() fails due to MAX_STACK_TRACE_ENTRIES is reached,
entry->class is assigned but entry is never added into any lock list.
This makes the list_del_rcu() in zap_class() oops later when the
module is unloaded. This patch fixes the problem by assigning
entry->class after save_trace() returns success.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-27 08:40:36 +02:00
H. Peter Anvin
c1b362e3b4 x86: update defconfigs
Enable some option commonly used by testers in defconfig, including
some very common device drivers and network boot support.  defconfig
is still not meant to be a kitchen-sink configuration.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-08-27 08:14:17 +02:00
Adrian Bunk
a95ca3b2b9 Blackfin arch: let PCI depend on BROKEN
AFAIR there exists blackfin hardware with PCI support, but the support
currently in the kernel fails to build starting with:

...
  CC      drivers/pci/probe.o
probe.c: In function 'pci_scan_slot':
probe.c:1056: error: implicit declaration of function 'pcibios_scan_all_fns'
make[3]: *** [drivers/pci/probe.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-27 10:55:05 +08:00
Bryan Wu
639f657145 Blackfin arch: move include/asm-blackfin header files to arch/blackfin
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-27 10:51:02 +08:00
John W. Linville
576fdeaef6 mac80211: quiet chatty IBSS merge message
It seems obvious that this #ifndef should be the opposite polarity...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:33:34 -04:00
Jan-Espen Pettersen
8ab65b03b7 mac80211: don't send empty extended rates IE
The association request includes a list of supported data rates.

802.11b: 4 supported rates.
802.11g: 12 (8 + 4) supported rates.
802.11a: 8 supported rates.

The rates tag of the assoc request has room for only 8 rates. In case of
802.11g an extended rate tag is appended. However in net/wireless/mlme.c
an extended (empty) rate tag is also appended if the number of rates is
exact 8. This empty (length=0) extended rates tag causes some APs to
deny association with code 18 (unsupported rates). These APs include my
ZyXEL G-570U, and according to Tomas Winkler som Cisco APs.

'If count == 8' has been used to check for the need for an extended rates
tag. But count would also be equal to 8 if the for loop exited because of
no more supported rates. Therefore a check for count being less than
rates_len would seem more correct.

Thanks to:
 * Dan Williams for newbie guidance
 * Tomas Winkler for confirming the problem

Signed-off-by: Jan-Espen Pettersen <sigsegv@radiotube.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:33 -04:00
Jouni Malinen
93015f0f34 mac80211: Fix debugfs file add/del for netdev
Previous version was using incorrect union structures for non-AP
interfaces when adding and removing max_ratectrl_rateidx and
force_unicast_rateidx entries. Depending on the vif type, this ended
up in corrupting debugfs entries since the dentries inside different
union structures ended up going being on top of eachother.. As the
end result, debugfs files were being left behind with references to
freed data (instant kernel oops on access) and directories were not
removed properly when unloading mac80211 drivers. This patch fixes
those issues by using only a single union structure based on the vif
type.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:33 -04:00
Julia Lawall
667d8af9af net/mac80211/mesh.c: correct the argument to __mesh_table_free
In the function mesh_table_grow, it is the new table not the argument table
that should be freed if the function fails (cf commit
bd9b448f4c)

The semantic match that detects this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@

x = mesh_table_alloc@p1(...)
...
if (x == NULL) S
... when != E = x
    when != mesh_table_free(x)
goto@p2 l;
... when != E = x
    when != f(...,x,...)
    when any
(
return \(0\|x\);
|
return@p3 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
p3 << r.p3;
@@

print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:32 -04:00
Jouni Malinen
087d833e5a mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM
The previous code was using IWEVCUSTOM to report IEs from AssocReq and
AssocResp frames into user space. This can easily hit the 256 byte
limit (IW_CUSTOM_MAX) with APs that include number of vendor IEs in
AssocResp. This results in the event message not being sent and dmesg
showing "wlan0 (WE) : Wireless Event too big (366)" type of errors.

Convert mac80211 to use IWEVASSOCREQIE/IWEVASSOCRESPIE to avoid the
issue of being unable to send association IEs as wireless events. These
newer event types use binary encoding and larger maximum size
(IW_GENERIC_IE_MAX = 1024), so the likelyhood of not being able to send
the IEs is much smaller than with IWEVCUSTOM. As an extra benefit, the
code is also quite a bit simpler since there is no need to allocate an
extra buffer for hex encoding.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:32 -04:00
Felipe Balbi
988b02f1bf net: rfkill: add missing line break
Trivial patch adding a missing line break on
rfkill_claim_show().

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.co>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:31 -04:00
Jiri Slaby
67d2e2dfab Ath5k: fix bintval setup
bintval is set to the initial value at .config_interface which is too
late, since it overwrites previously set value from .config. Move the
initialization to the .add_interface.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:31 -04:00
Jiri Slaby
004829730c Ath5k: lock beacons
Beacons setup and config was racy with beacon send. Ensure that
ISR and reset functions see consistent state of bbuf.

Use also dev_kfree_skb_any in ath5k_txbuf_free since we call it
from atomic now.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:31 -04:00
Dan Williams
d0c2912fe8 atmel: try open system authentication too
When the AP rejects a Shared Key authentication request, try Open System
auth too.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:30 -04:00
Dan Williams
3c34a5d821 atmel: return ENOENT on request_firmware failure
Return errors from request_firmware() (like other drivers that do
firmware load on device open) and make up plausible codes for other
error conditions. Gives userspace tools like NetworkManager a clue that
firmware may be missing when the result of setting IFF_UP is ENOENT.

Signed-off-by: Dan Williams <dcbw@redhat.com>

v2: fix reversed check of atmel_wakeup_firmware() in probe_atmel_card()
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-26 20:06:30 -04:00
Russell King
9abc6461a3 Merge branch 's3c2410' of git://aeryn.fluff.org.uk/bjdooks/linux.git 2008-08-26 23:16:45 +01:00
Wei Shuai
78af473530 [ARM] S3C2443: Fix the S3C2443 clock register definitions
Fix the S3C2443 clock register definitions for selecting the EPLL
reference clock described by S3C2443_CLKSRC_EPLLREF.

Signed-off-by: Wei Shuai <cpuwolf@gmail.com>
[ben-linux@fluff.org: minor description fixes]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:22 +01:00
Ben Dooks
df9f17e20e [ARM] JIVE: Fix the spi bus numbering
The first spi bus is registered with number 0, but
the board data says that the device on it is registered
on bus 1.

Move the spi bus to bus 1 to keep the compatibility with the
original board-support patches.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:22 +01:00
Ben Dooks
66592eee16 [ARM] S3C24XX: pwm.c: stop debugging output
Move debugging output to dev_dbg() instead of dev_info().

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:21 +01:00
Ben Dooks
103895925f [ARM] S3C24XX: Fix sparse warnings in pwm.c
Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm.c:

warning: symbol 's3c_device_timer' was not declared. Should it be static?
warning: symbol 'pwm_calc_tin' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:21 +01:00
Ben Dooks
1442e662d8 [ARM] S3C24XX: Fix spare errors in pwm-clock driver
Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm-clock.c:

warning: symbol 'clk_timer_scaler' was not declared. Should it be static?
warning: symbol 'clk_timer_tclk' was not declared. Should it be static?
warning: symbol 'clk_timer_tdiv' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:21 +01:00
Ben Dooks
f4cb1a8964 [ARM] S3C24XX: Fix sparse warnings in arch/arm/plat-s3c24xx/gpiolib.c
Fix the following problems spotted by sparse:

warning: symbol 's3c24xx_gpiolib_input' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_output' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_set' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_get' was not declared. Should it be static?
warning: symbol 'gpios' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:20 +01:00
Ben Dooks
ec8292347b [ARM] S3C24XX: Fix nor-simtec driver sparse errors
Fix the following sparse errors in arch/arm/mach-s3c2410/nor-simtec.c:

53:27: warning: symbol 'simtec_nor_pdata' was not declared. Should it be static?
77:13: warning: symbol 'nor_simtec_init' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-26 22:56:20 +01:00
Huang Weiyi
3ccd3ec6d4 [WATCHDOG] removed unused #include <version.h>
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/watchdog/pc87413_wdt.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:32:02 +00:00
Ilpo Jarvinen
95f62bdc55 [WATCHDOG] at91rm9200_wdt.c: fix misleading indentation
Signed-off-by: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:20:55 +00:00
Anton Vorontsov
593fc178f6 [WATCHDOG] mpc8xxx_wdt: fix modular build
Fix the following build error when mpc8xxx_wdt is selected to build as a
module:

drivers/watchdog/mpc8xxx_wdt.c:304: error: redefinition of '__inittest'
drivers/watchdog/mpc8xxx_wdt.c:298: error: previous definition of '__inittest' was here
drivers/watchdog/mpc8xxx_wdt.c:304: error: redefinition of 'init_module'
drivers/watchdog/mpc8xxx_wdt.c:298: error: previous definition of 'init_module' was here

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-08-26 20:20:44 +00:00
Thomas Mingarelli
ab4ba3cdeb [WATCHDOG] hpwdt.c kdebug support
add kdebug support for the hpwdt.c driver.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:20:32 +00:00
Florian Fainelli
03ec58568a [WATCHDOG] Add support for the IDT RC32434 watchdog
Add driver for the IDT RC32434 SoC built-in watchdog.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:20:20 +00:00
Florian Fainelli
b3e8f2c13a [WATCHDOG] Add support for the built-int RDC R-321x SoC watchdog
This patch adds support for the built-in RDC R-321x SoC watchdog.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:20:05 +00:00
Jochen Friedrich
eaa95eb6ea [WATHDOG] delete unused driver mpc8xx_wdt.c
The watchdog driver mpc8xx_wdt.c was a device interface to
arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is
gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware
is supported by mpc8xxx_wdt.c.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-08-26 20:19:56 +00:00
Ben Dooks
0e65fb2978 [WATCHDOG] Fix s3c2410_wdt driver coding style issues
Fixup coding style issues in the s3c2410_wdt driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:18:59 +00:00
Ben Dooks
9e3eaf1490 [WATCHDOG] Clean out header of s3c2410_wdt driver.
Remove the changelog from the top of the driver, which
is redundant as this information is more accurately
represented from the revision control holding the
file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:18:54 +00:00
Ben Dooks
b4253f8fc1 [WATCHDOG] Fix NULL usage in s3c2410_wdt driver.
Fix comparison of a pointer to 0, instead of using
NULL for a invalid pointer.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-08-26 20:18:52 +00:00
Steve French
96c2a1137b [CIFS] Reorder cifs config item for better clarity
Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-26 18:32:28 +00:00
Steve French
e9775843ec [CIFS] Correct keys dependency for cifs kerberos support
Must also depend on CIFS ...

Signed-off-by: Steve French <sfrench@us.ibm.com>
2008-08-26 18:22:50 +00:00
Linus Torvalds
1941246dd9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ASoC: Fix error paths in N810 machine driver init and release clocks at exit
  ALSA: oxygen: prevent muting of nonexistent AC97 controls
2008-08-26 10:45:20 -07:00
Linus Torvalds
1ef708ea44 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix __{in,out}s{w,l} to handle unaligned data
  [IA64] Fix ia64 build failure when CONFIG_SFC=m
2008-08-26 10:43:55 -07:00
David Woodhouse
5770a3fb5f Fix userspace export of <linux/net.h>
Including <linux/fcntl.h> in the user-visible part of this header has
caused build regressions with headers from 2.6.27-rc. Move it down to
the #ifdef __KERNEL__ part, which is the only place it's needed. Move
some other kernel-only things down there too, while we're at it.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-26 10:37:20 -07:00
Linus Torvalds
b22dfb735a Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] check version in spnego upcall response
  [CIFS] Kerberos support not considered experimental anymore
  [CIFS] distinguish between Kerberos and MSKerberos in upcall
  cifs: add local server pointer to cifs_setup_session
  [CIFS] reindent misindented statement
2008-08-26 10:36:33 -07:00
Linus Torvalds
bd5a54e93c Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Ignore vmlinux.lds generated files
  [MIPS] kgdb: Do not call fixup_exception
  [MIPS] RB532: Do not define registers that are already defined
  [MIPS] IP27: Export symbol pcibus_to_node to modules.
  [MIPS] kgdb: s/(void *)0)/NULL/
  [MIPS] kgdb: smp_call_function's 3rd argument is a pointer.
  [MIPS] TXx9: Fix mips_hpt_frequency initialization
  [MIPS] emma2rh: Fix build error by header file inclusion weeding.
  [MIPS] Jazz: Fix build error by header file inclusion weeding.
  [MIPS] Wire up new syscalls.
  [MIPS] Convert printk statements during kernel setup to use severity levels
2008-08-26 10:18:24 -07:00
Linus Torvalds
811da237ba Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Update defconfigs for most non-embedded platforms
  powerpc: Export CMO_PageSize
  powerpc/ps3: Fix ioremap of spu shadow regs
  powerpc/ps3: Rework htab code to remove ioremap
  powerpc/ps3: Update ps3_defconfig
  powerpc/cell/oprofile: Avoid double vfree of profile buffer
  powerpc: Update defconfigs for FSL PPC boards
  powerpc: Add cuImage.mpc866ads to the bootwrapper as a cuboot-8xx target
  cpm2: Fix race condition in CPM2 GPIO library.
  powerpc: fix memory leaks in QE library
  powerpc/85xx: TQM8548: DTS file fixes and cleanup
  powerpc: Fix whitespace merge in mpc8641 hpcn device tree
2008-08-26 10:07:27 -07:00
Steve French
3dae49abef Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-08-26 16:56:05 +00:00
Mark Brown
f8787fdcf6 [ARM] 5225/1: zaurus: Register I2C controller for audio codecs
corgi, spitz and poodle have audio codecs on their primary I2C bus so
need to call pxa_set_i2c_info() to set it up during init. Tested on
spitz by Stanislav.

Reported-by: Stanislav Brabec <utx@penguin.cz>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26 16:26:25 +01:00
Jarkko Nikula
e784539fe8 ALSA: ASoC: Fix error paths in N810 machine driver init and release clocks at exit
Thanks to Felipe Balbi <felipe.balbi@nokia.com> by noticing that if clk_get
to sys_clkout2_src fails, then n810_snd_device is never released.

Add also sys_clkout2_src release into error path, error code return and
release the clocks at exit.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-26 12:44:03 +02:00
Clemens Ladisch
3d839e5b87 ALSA: oxygen: prevent muting of nonexistent AC97 controls
The Xonar DX does not have CD Capture controls, so we have to check that
a control actually exists before muting it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-08-26 12:43:13 +02:00