Commit graph

640 commits

Author SHA1 Message Date
Vivi Li
9fc205283f Blackfin: kgdb_test: make sure to initialize num2
We check its value at runtime, so we want to avoid garbage across runs.

Signed-off-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:23 -05:00
Sonic Zhang
b68233e7f0 Blackfin: kgdb: disable preempt schedule when running single step in kgdb
Otherwise, gdb continue operation after a breakpoint is hit may trap
into endless breakpoint.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:23 -05:00
Sonic Zhang
900de05182 Blackfin: kgdb: disable interrupt when single stepping in ADEOS
When ADEOS and kgdb are both enabled, single step in linux kernel may be
scheduled to Xenomai core after return from interrupt handlers.  This
blocks gdb continue operation after a break point is hit.  So, disable
interrupt when running gdb single step.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:22 -05:00
Sonic Zhang
398834330c Blackfin: no-mpu: fix masking of small uncached dma region
When using an uncached DMA region less than 1 MiB, we try to mask off
the whole last 1 MiB for it.  Unfortunately, this fails as we forgot
to subtract one from the calculated mask, leading to the region still
be marked as cacheable.

Reported-by: Andrew Rook <andrew.rook@speakerbus.co.uk>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:18 -05:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Linus Torvalds
1e431a9d64 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Individual register get/set for ppc
  kgdbts: prevent re-entry to kgdbts before it unregisters
  debug_core,x86,blackfin: Clean up hw debug disable API
  kdb: Fix early debugging crash regression
  kgdb,arm: fix register dump
  kdb: fix per_cpu command to remove supress mask
  kdb: Add kdb kernel module sample
2010-10-29 11:49:38 -07:00
Dongdong Deng
d7ba979d45 debug_core,x86,blackfin: Clean up hw debug disable API
The kgdb_disable_hw_debug() was an architecture specific function for
disabling all hardware breakpoints on a per cpu basis when entering
the debug core.

This patch will remove the weak function kdbg_disable_hw_debug() and
change it into a call back which lives with the rest of hw breakpoint
call backs in struct kgdb_arch.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-29 13:14:41 -05:00
Namhyung Kim
aeebd3a3d9 ptrace: cleanup arch_ptrace() and friends on Blackfin
Change signature of get/put_reg() according to the change of arch_ptrace()
and remove unnecessary castings.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Namhyung Kim
9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Linus Torvalds
7f38839628 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (47 commits)
  Blackfin: bfin_spi.h: add MMR peripheral layout
  Blackfin: bfin_ppi.h: start a common PPI/EPPI header
  Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs
  Blackfin: bf538: add missing SIC_RVECT define
  Blackfin: bf561: rewrite SICA_xxx to just SIC_xxx
  Blackfin: bf54x: add missing SIC_RVECT definition
  Blackfin: H8606: move 8250 irqflags to platform resources
  Blackfin: glue XIP/ROM kernel kconfigs
  Blackfin: update sparse flags for latest upstream changes
  Blackfin: coreb: update ioctl numbers
  Blackfin: coreb: add gpl module license
  Blackfin: bf518-ezkit: add ssm2603 codec resources
  Blackfin: bf51x/bf52x: fix 16/32bit SPORT MMR helpers
  Blackfin: tll6527m: new board port
  Blackfin: bf526-ezbrd/bf527-ezkit: add NAND partition for u-boot
  Blackfin: merge kernel init memory back into main memory region
  Blackfin: gpio: add peripheral group check
  Blackfin: dma: bf54x: add missing break for SPORT1 TX IRQ
  Blackfin: add new cacheflush syscall
  Blackfin: bf548-ezkit: increase u-boot partition size
  ...
2010-10-22 21:12:27 -07:00
Linus Torvalds
092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
steven miao
05bbec38db Blackfin: gpio: add peripheral group check
Many Blackfin parts group sets of pins into a single functional unit.
This means you cannot use different pins within a group for different
peripherals.  Our resource conflict checking thus far has been limited
to individual pins, so if someone tried to grab a different pin from
the same group, it would be allowed while silently changing the other
pins in the same group.

One common example is the pin set PG12 - PG15 on BF51x parts.  They
may either be used with SPI0 (1st function), or they may be used with
PTP/PWM/AMS3 (3rd function).  Ideally, we'd like to use PG12 - PG14
for SPI0 while using PG15 with AMS3, but the hardware does not permit
this.  In the past, the software would allow the pins to be requested
this way, but ultimately things like the Blackfin SPI driver would
stop working when the hardware rerouted to a different peripheral.

Signed-off-by: steven miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 04:02:01 -04:00
Sonic Zhang
99a5b2878b Blackfin: add new cacheflush syscall
Flushing caches sometimes requires anomaly workarounds which require
supervisor-only insns.  Normally we don't need to flush caches from
userspace so this isn't a problem, but when gcc generates trampolines
on the stack, we do.

So add a new syscall for gcc to use modeled after the mips version.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:59 -04:00
Barry Song
41c3e3346a Blackfin: access_ok: permit L1 stack
When apps run with their stack in L1, some system calls might be made
where a buffer is in the stack as an argument.  So make sure the core
Blackfin access code does not reject this memory location.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:54 -04:00
Barry Song
175671e75c Blackfin: ptrace: enable access to L1 stacks
If an app is placing its stack in L1 scratchpad SRAM, make sure ptrace
is granted access to it so that gdb can do its thing.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:52 -04:00
Arnd Bergmann
6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
David Howells
df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00
David Howells
3b139cdb37 Blackfin: Rename IRQ flags handling functions
Rename h/w IRQ flags handling functions to be in line with what is expected for
the irq renaming patch.  This renames local_*_hw() to hard_local_*() using the
following perl command:

	perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"`

and then fixing up asm/irqflags.h manually.

Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both
return the flags rather than passing it through the argument list.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07 14:08:52 +01:00
David Howells
d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
David Howells
c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
Mike Frysinger
f507442962 Blackfin: add support for dynamic ftrace
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:54 -04:00
Michael Hennerich
382dbe5b39 Blackfin: portmux: fix peripheral map overflow when requesting pins
Some processors have groups of pins that aren't an even number of 16.
This causes the array size calculation to under count the number of
needed entries due to integer truncation.  So on the BF51x, while we
should have 3 bitmaps (41 / 16), we end up with 2 and pin requests for
the 3rd bank end up scribbling over the top of the GPIO IRQ array.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:53 -04:00
Michael Hennerich
7a4a207e74 Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options
Newer parts have optional Hysteresis/Schmitt Trigger options to help with
dirty signals.  So add some kconfig options for tuning this and enable it
by default for people.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:52 -04:00
Mike Frysinger
812ae98f08 Blackfin: gpio/portmux: clean up whitespace corruption
Random tabs instead of spaces, mixes of the two, and unicode spaces
instead of ascii spaces.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:51 -04:00
Michael Hennerich
d1401e1dc2 Blackfin: fix DMA/cache bug when resuming from suspend to RAM
The dma_memcpy() function takes care of flushing different caches for us.
Normally this is what we want, but when resuming from mem, we don't yet
have caches enabled.  If these functions happen to be placed into L1 mem
(which is what we're trying to relocate), then things aren't going to
work.  So define a non-cache dma_memcpy() variant to utilize in situations
like this.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:50 -04:00
Mike Frysinger
332824b835 Blackfin: gpio: unify & clean up reserved map handling
The duplicated bit banging logic is getting out of hand, so unify the
local API to make management a lot easier.  This also makes the code
a lot easier to follow.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:47 -04:00
Mike Frysinger
1ed181f248 Blackfin: move MPU anomaly check to common location
Keep all anomaly/arch checks in one place to keep logic simple.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:45 -04:00
Mike Frysinger
d49e8e7e5a Blackfin: use common EXCEPTION_TABLE() in vmlinux.lds
Rather than do our own thing, use what common code provides.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:45 -04:00
Mike Frysinger
9c1a125921 ptrace: unify FDPIC implementations
The Blackfin/FRV/SuperH guys all have the same exact FDPIC ptrace code in
their arch handlers (since they were probably copied & pasted).  Since
these ptrace interfaces are an arch independent aspect of the FDPIC code,
unify them in the common ptrace code so new FDPIC ports don't need to copy
and paste this fundamental stuff yet again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27 09:12:44 -07:00
Linus Torvalds
064e297c32 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits)
  Blackfin: SMP: fix continuation lines
  Blackfin: acvilon: fix timeout usage for I2C
  Blackfin: fix typo in BF537 IRQ comment
  Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options
  Blackfin: set ARCH_KMALLOC_MINALIGN
  Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic
  Blackfin: another year of changes (update copyright in boot log)
  Blackfin: optimize strncpy a bit
  Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests
  Blackfin: move string functions to normal lib/ assembly
  Blackfin: SIC: cut down on IAR MMR reads a bit
  Blackfin: bf537-minotaur: fix build errors due to header changes
  Blackfin: kgdb: pass up the CC register instead of a 0 stub
  Blackfin: handle HW errors in the new "FAULT" printing code
  Blackfin: show the whole accumulator in the pseudo DBG insn
  Blackfin: support all possible registers in the pseudo instructions
  Blackfin: add support for the DBG (debug output) pseudo insn
  Blackfin: change the BUG opcode to an unused 16-bit opcode
  Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
  Blackfin: add support for the DBGA (debug assert) pseudo insn
  ...
2010-05-24 08:02:58 -07:00
Mike Frysinger
be1577e378 Blackfin: another year of changes (update copyright in boot log)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:11 -04:00
Robin Getz
479ba60358 Blackfin: move string functions to normal lib/ assembly
Since 'extern inline' doesn't work correctly in the context of the Linux
kernel (too many overriding defines), move the string functions to normal
lib/ assembly files (like the existing mem funcs).  This avoids the forced
inline all over the kernel and allows us to place them constantly in L1.

This also avoids some module failures when gcc inserts calls to string
functions but the kernel build system doesn't fully consult the library
archives.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:09 -04:00
Mike Frysinger
d2db97bf6b Blackfin: kgdb: pass up the CC register instead of a 0 stub
While the CC pseudo register can be deduced from the ASTAT register, make
sure we set its value correctly instead of always stubbing it out as 0.
GDB itself looks at this pseudo register instead of ASTAT, so we have to
supply the right value.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:07 -04:00
Robin Getz
a80d5f449d Blackfin: handle HW errors in the new "FAULT" printing code
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:07 -04:00
Robin Getz
a6d9dbf5e4 Blackfin: show the whole accumulator in the pseudo DBG insn
Rather than print just part of the accumulator register, show the whole
40 bits.  This matches the simulator behavior better.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:06 -04:00
Robin Getz
5a132f7aeb Blackfin: support all possible registers in the pseudo instructions
Rather than decoding just the common R/P registers, handle all of them.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:05 -04:00
Robin Getz
dc89d97fc7 Blackfin: add support for the DBG (debug output) pseudo insn
Another pseudo insn used by Blackfin simulators.  Also factor some now
common register lookup code out of the DBGA handlers.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:19:05 -04:00
Robin Getz
6ce3e9c2a2 Blackfin: add support for the DBGA (debug assert) pseudo insn
A few pseudo debug insns exist to make testing of simulators easier.
Since these don't actually exist in the hardware, we have to have the
exception handler take care of emulating these.  This allows sim test
cases to be executed unmodified under Linux and thus simplify debugging
greatly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22 14:18:56 -04:00
Robin Getz
9a95e2f100 Blackfin: make hardware trace output a little more useful
Decode the vast majority of insns that appear in the trace buffer to get a
better idea of what's going on at a glance.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:19 -04:00
Robin Getz
d60805ad47 Blackfin: print out the faulting insn in the trace output
Print out the faulting instruction so when people send traces as part of
bug reports, we have a better idea of what is going on.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:19 -04:00
Robin Getz
d28cff4b61 Blackfin: remove CONFIG_DEBUG_VERBOSE from trace.c
Now that the split traps code has moved all the verbose output to the
trace.c file, we can unify all the CONFIG_DEBUG_VERBOSE handling.  This
gets rid of much of the crappy ifdef forest and enables usage of normal
pr_xxx functions so checkpatch stops complaining.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:18 -04:00
Robin Getz
2a12c4632d Blackfin: split kernel/traps.c
The current kernel/traps.c file has grown a bit unwieldy as more debugging
functionality has been added over time, so split it up into more logical
files.  There should be no functional changes here, just minor whitespace
tweaking.  This should make future extensions easier to manage.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:17 -04:00
Michael Hennerich
bb84dbf69b Blackfin: punt Blackfin-specific GPIO wakeup API
This patch removes a custom GPIO wakeup API which allowed GPIOs to act
as wakeup sources, which are not configured as Interrupts.
This API is a leftover from the time before irq_wake was established.
From now on people must use enable_irq_wake(GPIO_IRQx) and the GPIO in
question needs to be configured as Interrupt.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:40:16 -04:00
Jason Wessel
e8861129d3 kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
The new debug core api requires all architectures that use to debug
core to implement a function to set the program counter.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-05-20 21:04:20 -05:00
Linus Torvalds
7d02093e29 Merge branch 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  avr32: Fix typo in read_persistent_clock()
  sparc: Convert sparc to use read/update_persistent_clock
  cris: Convert cris to use read/update_persistent_clock
  m68k: Convert m68k to use read/update_persistent_clock
  m32r: Convert m32r to use read/update_peristent_clock
  blackfin: Convert blackfin to use read/update_persistent_clock
  ia64: Convert ia64 to use read/update_persistent_clock
  avr32: Convert avr32 to use read/update_persistent_clock
  h8300: Convert h8300 to use read/update_persistent_clock
  frv: Convert frv to use read/update_persistent_clock
  mn10300: Convert mn10300 to use read/update_persistent_clock
  alpha: Convert alpha to use read/update_persistent_clock
  xtensa: Fix unnecessary setting of xtime
  time: Clean up direct xtime usage in xen
2010-05-19 17:10:06 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
John Stultz
cb0e996378 blackfin: Convert blackfin to use read/update_persistent_clock
This patch converts the blackfin architecture to use the generic
read_persistent_clock and update_persistent_clock interfaces, reducing
the amount of arch specific code we have to maintain, and allowing for
further cleanups in the future.

I have not built or tested this patch, so help from arch maintainers
would be appreciated.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1267675049-12337-10-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-03-13 01:14:12 +01:00
Joachim Eastwood
f9c29e872b Blackfin: mark gpio lib functions static
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Joachim Eastwood
7f4f69f991 Blackfin: GPIO: implement to_irq handler
This makes it possible to support IRQs coming from off-chip GPIO
controllers.

Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:52 -05:00
Frans Pop
2bc4affe9c Blackfin: remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:51 -05:00