Commit graph

9635 commits

Author SHA1 Message Date
Luis R. Rodriguez
b1a5215004 ath5k: remove Atheros 11n devices from supported list
Remove Atheros 11n devices from being claimed by ath5k as its
now handled by ath9k.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:42 -04:00
Christian Lamparter
5423b2ed25 p54: swap short slot time dcf values
these "magic" values must to be the other way round...

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:04 -04:00
Ivo van Doorn
0fc980392e rt2x00: Block all unsupported modes
It was possible for unsupported operating modes
to be accepted by the add_interface callback function.
This patch will block those modes until proper support
has been implemented for them.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:04 -04:00
Larry Finger
eda0c003d1 p54: Fix for TX sequence number problem
Following "mac80211: fix TX sequence numbers", if a packet
has the IEEE80211_TX_CTL_ASSIGN_SEQ assigned, a sequence number must be
supplied, either by hardware or software. AFAIK, no such hardware exists
for the p54, thus it must be done in software. With this patch, a connection
qith p54usb is stable, whereas the interface went off-line in 2-3 hours
without this change. Note that this code will have to be reworked for proper
sequence numbers on beacons. In addition, the sequence number has been placed
in the hardware state, not the vif state.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:04 -04:00
Tomas Winkler
f367422794 iwlwifi: cleanup iwl_tx_skb
This patch cleans up iwl_tx_skb function.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:04 -04:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King
4fb8af10d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes 2008-08-07 09:55:03 +01:00
Russell King
be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Russell King
0f8469a54f [ARM] Eliminate useless includes of asm/mach-types.h
There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file.  Remove these unnecessary
includes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:04 +01:00
Jeff Garzik
3859069bc3 Merge branch 'for-jeff' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into tmp 2008-08-07 04:05:46 -04:00
Krzysztof Halasa
e2c709b0ba WAN: remove extra help text from HDLC_PPP config option
Remove extra help text from HDLC_PPP config option.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 04:00:03 -04:00
Moni Shoua
db018a5f49 bonding: Don't destroy bonding master when removing slave via sysfs
It is wrong to destroy a bonding master from a context that uses the sysfs
of that bond. When last IPoIB slave is unenslaved from by writing to a
sysfs file (for bond0 this would be /sys/class/net/bond0/bonding/slaves)
the driver tries to destroy the bond. This is wrong and can lead to a
lockup or a crash.  This fix lets the bonding master stay and relies on
the user to destroy the bonding master if necessary (i.e. before module
ib_ipoib is unloaded)

This patch affects only bonds of IPoIB slaves. Ethernet slaves stay
unaffected.

Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 03:59:56 -04:00
Jay Vosburgh
f0c76d6177 bonding: refactor mii monitor
Refactor mii monitor.  As with the previous ARP monitor refactor,
the motivation for this is to handle locking rationally (in this case,
removing conditional locking) and generally clean up the code.

	This patch breaks up the monolithic mii monitor into two phases:
an inspection phase, followed by an optional commit phase.  The commit phase
is the only portion that requires RTNL or makes changes to state, and is
only called when inspection finds something to change.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 03:59:53 -04:00
Wang Chen
c16d118537 [netdrvr] Drivers should not set IFF_* flag themselves
Some hardware set promisc when they are requested to set IFF_ALLMULTI flag.
It's ok, but if drivers set IFF_PROMISC flag when they set promisc,
it will broken upper layer handle for promisc and allmulti.
In addition, drivers can use their own hardware programming to make it.
So do not allow drivers to set IFF_* flags.

This is a general driver fix, so I didn't split it to pieces and send
to specific driver maintainers.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:23:19 -04:00
Laurent Pinchart
fe41424855 dm9000: Support MAC address setting through platform data.
The dm9000 driver reads the chip's MAC address from the attached EEPROM. When
no EEPROM is present, or when the MAC address is invalid, it falls back to
reading the address from the chip.

This patch lets platform code set the desired MAC address through platform
data.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:22:54 -04:00
Stephen Hemminger
9a5d341420 3c59x: use netdev_alloc_skb
Fix possible bug where end of receive buffer could be overwritten.
The allocation needs to allow for the reserved space. This would only happen
if device received packet greater than Ethernet standard MTU.

Change this driver to use netdev_alloc_skb rather than setting skb->dev
directly. For the initial allocation it doesn't need to be GFP_ATOMIC.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:22:15 -04:00
Ben Collins
4f63135eb2 pegasus: add blacklist support to fix Belkin bluetooth dongle.
Reference: https://launchpad.net/bugs/140511

The Belkin bluetooth dongle unfortunately shares the vendor and device id
with the network adapter which causes lockups whenever the bluetooth
dongle is inserted.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Ben Collins <ben.collins@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:21:26 -04:00
Andrew Morton
11a859e591 drivers/net/netxen/netxen_nic_hw.c: fix printk warnings
drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_read_direct':
drivers/net/netxen/netxen_nic_hw.c:1414: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64'
drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_write_direct':
drivers/net/netxen/netxen_nic_hw.c:1487: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64'

You don't know what type was used for u64 hence they cannot be printed without
casting.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:21:17 -04:00
Eugene Teo
5608784fdf hamradio: add missing sanity check to tty operation
Add missing sanity check to tty operation.

Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Eugene Teo <eteo@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:21:08 -04:00
Gustavo F. Padovan
11795aa4f8 drivers/net: coding styles fixes to drivers/net/8390.c
Fix all errors and warnings reported by checkpatch.pl

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:21:05 -04:00
Gustavo F. Padovan
caa1687c01 drivers/net: coding styles fixes to drivers/net/8390p.c
Fix all errors and warnings reported by checkpatch.pl

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:21:03 -04:00
Gustavo F. Padovan
057b61afca drivers/net: Remove 'return' of void function NS8390p_init()
We don't need this into a void function.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:21:02 -04:00
Yoshinori Sato
71557a37ad [netdrvr] sh_eth: Add SH7619 support
Add support SH7619 Internal ethernet controler.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:20:57 -04:00
Thomas Bogendoerfer
d91d4bb9db METH: fix MAC address setup
Setup of the mac filter lost the upper 16bit of the mac address. This
bug got unconvered by a patch, which fixed the promiscous handling.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:19 -04:00
Eduardo Habkost
0b1ab1b8a4 xen-netfront: use netif_start_queue() on xennet_open()
xen-netfront never called netif_start_queue() and was was waking the
queue on xennet_open(), triggering the BUG_ON() on __netif_schedule().

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:17 -04:00
root
b08c42b283 qla3xxx: driver version change.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:15 -04:00
Ron Mercer
4ea0d6e5b8 qla3xxx: cleanup: Remove some unused structure definitions and structure elements.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:14 -04:00
Ron Mercer
6bc0ed97d5 qla3xxx: cleanup: Remove some unused defined constants in the header file.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:13 -04:00
Ron Mercer
eb115b0099 qla3xxx: fix: Fix IFF_MULTICAST setting.
The driver was erroneously clearing this bit though the hardware supports multicast.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:13 -04:00
Ron Mercer
49ef26eb8d qla3xxx: fix: Remove unused set_multicast function.
This device is one side of a two-function adapter (NIC and iSCSI).
Promiscuous mode setting/clearing is not allowed from the NIC side.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:12 -04:00
Dhananjay Phadke
9ad27643f3 netxen: fix promisc mode, mtu setting
For NX3031, multicast filtering, promisc mode, and max frame size
setting is handled by firmware, driver needs to send request to
enable/disable it.

For old chip revisions / firmware, driver still sets it directly.

Added function pointer to set mtu according to chip revision.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:10 -04:00
Dhananjay Phadke
83821a078a netxen: fix cmd ring init
Initialize producer and consumer indices during netdev open(), only
for old firmware/chip.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:09 -04:00
Dhananjay Phadke
d71e1be8ed netxen: fix legacy interrupts
Fix legacy interrupt mode for NX3031 chips, read pci interrupt state
in hardware to guard against spurious interrupt.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:09 -04:00
Dhananjay Phadke
a70f939338 netxen: add new board types
Add couple of new board configurations based on NX3031 chip.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:08 -04:00
Dhananjay Phadke
24a7a45511 netxen: fix link status, link speed
For NX3031, the phy is managed by firmware, so driver should avoid
setting any phy registers.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:07 -04:00
Adrian Bunk
4ad7a018cf remove bogus CONFIG_GFAR_NAPI's
The commit that made the CONFIG_GFAR_NAPI code unconditional was
included at the same time as a new CONFIG_GFAR_NAPI user, resulting
in these bugus #ifdef's.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:05 -04:00
Li Yang
5b1c29b436 net/fs_enet: remove redundant messages for performance
Currently when we do a packet flood to the Ethernet port, the console
reports error every time when a packet is dropped.  This is too
redundant and cost performance.  Remove message for this type of event.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:03 -04:00
Ayaz Abdulla
9a33e88356 forcedeth: add tx pause limit
This patch adds support for limiting the number of tx pause frames to a
default of 8. Previously, hardware would send out continuous stream of
pause frames.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:01 -04:00
Ayaz Abdulla
06941931d8 forcedeth: add jumbo frame support for mcp79
This patch adds jumbo frame support for MCP79 chipsets.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:00 -04:00
Ayaz Abdulla
9c6624352c forcedeth: add new tx stat counters
This patch adds support for new tx statistic counters in the hardware -
unicast, multicast, and broadcast

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:11:00 -04:00
Ayaz Abdulla
1ef6841b4c forcedeth: fix rx error policy
This patch enforces a stricter policy on rx errors. The driver needs to
verify whether there are multiple rx errors versus a single error.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:10:59 -04:00
Jeff Garzik
8bad4afe12 Merge branch 'via-velocity' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6 into tmp 2008-08-07 02:05:01 -04:00
Stephen Hemminger
f71eb1a24a sky2: fix PM related regressions
Fix the problems reported for 2.6.27-rc1 caused by over aggressive
power management. Turning clock off on PCI Express is problematic for WOL,
and when doing multi-booting.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:50 -04:00
Alexander Duyck
a6ef5e9d7d igb: remove igb_init_managability as it is deprecated
igb_init_managability does not actually perform any function as the two
registers it attempts to write are both read only on the host.  This patch
removes the function and all references to it from the driver.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:26 -04:00
Alexander Duyck
ec796b4ffc igb: remove three redundant functions left in the code
Three functions were left in the code that are no longer used.  I am removing
these functions just to keep the code clean.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:20 -04:00
Alexander Duyck
549bdd84dc igb: correct issue of set_mta member of mac.ops not being populated
The igb_mta_set function was not being correctly used

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:16 -04:00
Alexander Duyck
726c09e7b6 igb: fixes 82576 serdes init to correctly support manual flow control changes
This patch changes the PCS configuration for serdes so that the flow
control options change be set via the ethtool -A option.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:09 -04:00
Alexander Duyck
c743a87eab igb: fix null pointer dereference seen with fiber NICs
With a fiber or serdes NIC installed the driver was causing a null pointer
dereference on driver unload.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:05 -04:00
Alexander Duyck
106ef2fef3 igb: fix comments
The internal name was used in comments, replaced with silicon part number.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:55:00 -04:00
Jay Cliburn
c2ac3ef35c atl1: deal with hardware rx checksum bug
The L1 hardware contains a bug that flags a fragmented IP packet
as having an incorrect TCP/UDP checksum, even though the packet
is perfectly valid and its checksum is correct.  There's no way to
distinguish between one of these good packets and a packet that
actually contains a TCP/UDP checksum error, so all we can do is
allow the packet to be handed up to the higher layers and let it
be sorted out there.

Add a comment describing this condition and remove the code that
currently fails to handle what may or may not be a checksum error.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:57 -04:00
Bruce Allan
f0f422e573 e1000e: remove inapplicable test for ioport
There are currently no devices supported by the e1000e driver which need
ioport resources, remove the test for it and all unnecessary code
associated with it (struct e1000_adapter elements, local variables, etc.)

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:55 -04:00
Jesse Brandeburg
c43bc57e5d e1000e: fix drv load issues
a few people seem to have problems maintaining gigabit link
and it was root caused to an interaction between the managability
firmware on the host and the driver, not communicating.

The form of communication they use is the drv_load bit.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:53 -04:00
Auke Kok
10aa4c0447 e1000e: perform basic 82573 EEPROM checks for known issues
82573 EEPROMs have been shipped out with known issues. While most
people will never see the issues some people do and we know
how to address them. Warn the user if we find one of these
EEPROM issues.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:50 -04:00
Jeff Kirsher
44defeb3f6 e1000e: convert ndev_ printks to something smaller
The ndev_* printk's are too lenghty and we don't need to specify
the adapter/netdev struct at all, making this a lot more readable.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:49 -04:00
Brice Goglin
77970ea50b myri10ge: set 64bits consistent DMA mask
Set 64bits consistent DMA mask since it improves performance
in some cases. No need to check the return value since it is
not required for the driver to work.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:46 -04:00
Brice Goglin
6a4c4ad2f0 myri10ge: update firmware headers
Update myri10ge firmware headers.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 01:54:44 -04:00
Linus Torvalds
e63e03273b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (78 commits)
  AX.25: Fix sysctl registration if !CONFIG_AX25_DAMA_SLAVE
  pktgen: mac count
  pktgen: random flow 
  bridge: Eliminate unnecessary forward delay
  bridge: fix compile warning in net/bridge/br_netfilter.c
  ipv4: remove unused field in struct flowi (include/net/flow.h).
  tg3: Fix 'scheduling while atomic' errors
  net: Kill plain NET_XMIT_BYPASS.
  net_sched: Add qdisc __NET_XMIT_BYPASS flag
  net_sched: Add qdisc __NET_XMIT_STOLEN flag
  iwl3945: fix merge mistake for packet injection
  iwlwifi: grap nic access before accessing periphery registers
  iwlwifi: decrement rx skb counter in scan abort handler
  iwlwifi: fix unhandled interrupt when HW rfkill is on
  iwlwifi: implement iwl5000_calc_rssi
  iwlwifi: memory allocation optimization
  iwlwifi: HW bug fixes
  p54: Fix potential concurrent access to private data
  rt2x00: Disable link tuning in rt2500usb
  iwlwifi: Don't use buffer allocated on the stack for led names
  ...
2008-08-05 19:37:42 -07:00
David S. Miller
33e334950a Merge branch 'no-ath9k' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2008-08-05 01:28:35 -07:00
Matt Carlson
2f751b67a8 tg3: Fix 'scheduling while atomic' errors
This patch fixes the 'scheduling while atomic' errors introduced by
commit 12dac0756d ("tg3: adapt tg3 to
use reworked PCI PM code").

The first hunk of the patch removes an unnecessary
tg3_set_power_state() call.  The chip will already be in the D0 state
either due to a chip reset or through a previous call to
tg3_set_power_state().

The second hunk of the patch moves the tg3_set_power_state() call
outside the critical section guarded by tg3_full_lock() and
tg3_full_unlock() functions.  The power state of the device is and
should be outside the lock's domain and all other
tg3_set_power_state() calls support this.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-04 23:18:20 -07:00
Linus Torvalds
2e1e9212ed Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits)
  sh: enable maple_keyb in dreamcast_defconfig.
  SH2(A) cache update
  nommu: Provide vmalloc_exec().
  add addrespace definition for sh2a.
  sh: Kill off ARCH_SUPPORTS_AOUT and remnants of a.out support.
  sh: define GENERIC_HARDIRQS_NO__DO_IRQ.
  sh: define GENERIC_LOCKBREAK.
  sh: Save NUMA node data in vmcore for crash dumps.
  sh: module_alloc() should be using vmalloc_exec().
  sh: Fix up __bug_table handling in module loader.
  sh: Add documentation and integrate into docbook build.
  sh: Fix up broken kerneldoc comments.
  maple: Kill useless private_data pointer.
  maple: Clean up maple_driver_register/unregister routines.
  input: Clean up maple keyboard driver
  maple: allow removal and reinsertion of keyboard driver module
  sh: /proc/asids depends on MMU.
  arch/sh/boards/mach-se/7343/irq.c: removed duplicated #include
  arch/sh/boards/board-ap325rxa.c: removed duplicated #include
  sh/boards/Makefile typo fix
  ...
2008-08-04 17:26:15 -07:00
Zhu Yi
3e2236c108 iwl3945: fix merge mistake for packet injection
We should allow packets transmission in monitor mode for 3945. The
patch fixes a merge error with 2.6.26 kernel.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:14 -04:00
Tomas Winkler
2d3db67951 iwlwifi: grap nic access before accessing periphery registers
We need to grap nic access before accessing periphery registers.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:13 -04:00
Emmanuel Grumbach
1465256236 iwlwifi: decrement rx skb counter in scan abort handler
This patch decrements rx skb counter in scan abort handler.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:13 -04:00
Tomas Winkler
c1842d6150 iwlwifi: fix unhandled interrupt when HW rfkill is on
This patch fixes unhandled interrupt when HW rfkill is on during
devices start up. The behavior changes, now open is successful even
when rfkill is on. This is to align with the situation when rfkill
is set on after opening.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:13 -04:00
Tomas Winkler
caab8f1a5d iwlwifi: implement iwl5000_calc_rssi
This patch implements rssi calculation for 5000 HW.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:12 -04:00
Gregory Greenman
da99c4b6c2 iwlwifi: memory allocation optimization
This patch optimizes memory allocation. The cmd member of
iwl_tx_queue was allocated previously as a continuous block
of memory. This patch allocates separate memory chunks for each command
and maps/unmaps these chunks in the run time.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:12 -04:00
Tomas Winkler
4c43e0d0ec iwlwifi: HW bug fixes
This patch adds few HW bug fixes.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:12 -04:00
Larry Finger
6041e2a08c p54: Fix potential concurrent access to private data
Experience with the rtl8187 driver has shown that mac80211 can make
calls to the config callback routine in rapid succession. This patch
creates a mutex that protects the private data in several of the routines
called by mac80211.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:12 -04:00
Ivo van Doorn
d06193f311 rt2x00: Disable link tuning in rt2500usb
In the legacy rt2570 driver the link tuner was never
really called. And now the reason has finally become
apparent: It breaks TX capabilities

As soon as the device has been associated all following
TX frames will be queued in the hardware and never transmitted
to the air. Disabling sections of the link tuner did not
have the expected result, but completely disabling the
link tuner did have the right result (Both of my rt2570 devices
came back to life).

This should fix Fedora bug: 411481

v2: Fix typos

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:11 -04:00
Sven Wegener
5cbbb376d6 iwlwifi: Don't use buffer allocated on the stack for led names
Having the buffer on the stack and even re-using it for all led devices is bad.
Not being able to resolve the name member of the led device structure to a
meaningful value leads to confusion during ad-hoc debugging and potential
breakage in the future, if we ever decide to access the name member outside of
the registration function. Move the buffer to our private per led device
structures so that it is accessible after registration.

A quick grep didn't yield any occurence of using the led device name parameter
outside of the led device registration function, so currently we should already
be safe for normal operation.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:11 -04:00
Tomas Winkler
4fc22b21b3 iwlwifi: rename 4965 to AGN
This patch renames driver name from 4965 to AGN
The driver supports both 4965AGN and 5000AGN family

The driver's original module name iwl4965.ko remains as an alias

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:11 -04:00
Tomas Winkler
3ac7f14694 iwlwifi: fix checkpatch.pl errors
This patch fixes errors reported by checkpatch in iwlwifi drivers

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:11 -04:00
Tomas Winkler
25bc2deda9 iwlwifi: rename iwl4965-base.c to iwl-agn.c
This patch renames iwl4965-base.c to iwl-agn.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:10 -04:00
Tomas Winkler
b5d7be5e66 iwlwifi: use dtim_period from association, and set listen_interval
This patch uses dtim_period from association, and sets the listen_interval.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:10 -04:00
Denis V. Lunev
e170402e54 iwlwifi: RS small compile warnings without CONFIG_IWLWIFI_DEBUG
iwl-agn-rs.c: In function 'rs_clear':
iwl-agn-rs.c:2405: warning: unused variable 'priv

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:09 -04:00
Emmanuel Grumbach
4aa41f12aa iwlwifi: bug fix in AGG flow - cast const to ULL
This patch fixes a bug in AGG flow:
u64 bitmap = 0;
bitmap |= 1 << 32 results to be 0xffffffff80000000.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:09 -04:00
Esti Kummer
c785d1d501 iwlwifi: set led register in disassociation
This patch sets the led register in disassociation flow according to
rf-kill state : off - in case of rf_kill, on - otherwise.

Signed-off-by: Esti Kummer <ester.kummer@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:09 -04:00
Tomas Winkler
3ce84b9f2f iwlwifi: kill iwl4965_fill_rs_info
iwl4965_fill_rs_info was used in sysfs. This info is already present
in iwl-agn-rs debugfs.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:08 -04:00
Tomas Winkler
e227ceac84 iwlwifi: rename iwl-4695-rs to iwl-agn-rs
This patch renames iwl-4965-rs to iwl-agn-rs as it provides
rate scale capability for all AGN capable iwlwifi drivers.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:08 -04:00
Tomas Winkler
e2e3c57b27 iwlwifi: move iwl4965_set_pwr_src to iwl4965-base.c
This patch moves iwl4965_set_pwr_src to iwl4965-base.c.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:08 -04:00
Tomas Winkler
4bf64efd26 iwlwifi: move beacon handling to iwl4965-base.c
This patch concentrates becaon handling in iwl4965-base.c.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:07 -04:00
Tomas Winkler
d783b06107 iwlwifi: move iwl4965_mac_ampdu_action to iwl4965-base.c
This patch moves iwl4965_mac_ampdu_action to iwl4965-base.c.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:07 -04:00
Esti Kummer
298df1f62a iwlwifi: corrects power_level in sysfs
This patch corrects power_level in sysfs.

Signed-off-by: Esti Kummer <ester.kummer@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:06 -04:00
Mohamed Abbas
ca579617d8 iwlwifi: add power save to 5000 HW
This patch adds support for power save for 5000 HW.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-04 15:09:06 -04:00
Ivo van Doorn
82f97b8d3c rt2x00: Fix compile warning
rt2x00usb_vendor_request_large_buff is write-only, so it is
safe to make the argument a const.

Fixes compile warning:
drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware':
drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-02 01:31:09 -07:00
David S. Miller
e9e80ea5f2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2008-08-01 22:08:51 -07:00
Niels de Vos
61a2d07d3f Remove newline from the description of module parameters
Some module parameters with only one line have the '\n' at the end of the
description.  This is not needed nor wanted as after the description the
type (i.e.  int) is followed by a newline.

Some modules contain a multi-line description, these are not affected
by this patch.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Ed L. Cashin <ecashin@coraid.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Roland Dreier <rolandd@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01 12:46:41 -07:00
Paul Mundt
26a8ef5326 net: stnic: Fix up fallout from SH header migration.
asm/se.h moved to mach-se/mach/se.h, update the path. We could use
mach/se.h here also, but it's preferable to be explicit when there's
only a single supported mach-type.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-02 04:39:33 +09:00
Maxim Levitsky
56decd3c57 iwl3945: Fix statistics in monitor mode
iwl3945_rx_reply_rx was sending packets too early to
mac80211, before updating signal strength/quality.
This resulted in garbage power levels.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:36 -04:00
Takashi Iwai
3d0f823953 prism54 - Use offsetof()
Use the standard offsetof() macro to fix a compile warning below:
  CC [M]  drivers/net/wireless/prism54/isl_ioctl.o
drivers/net/wireless/prism54/isl_ioctl.c: In function 'prism2_ioctl_set_generic_element':
drivers/net/wireless/prism54/isl_ioctl.c:2658: warning: cast from pointer to integer of different size

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:35 -04:00
Takashi Iwai
fb55d887c5 ipw2200 - Fix bad ipw_write8() macro
ipw_write8() can't be used alone with a loop because of a wrong definition.

  CC [M]  drivers/net/wireless/ipw2200.o
drivers/net/wireless/ipw2200.c: In function 'ipw_ethtool_set_eeprom':
drivers/net/wireless/ipw2200.c:10579: warning: array subscript is above array bounds
drivers/net/wireless/ipw2200.c: In function 'ipw_load':
drivers/net/wireless/ipw2200.c:2663: warning: array subscript is above array bounds

Add missing do {} while (0) to fix them.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:35 -04:00
Larry Finger
7dcdd073bf rtl8187: Fix lockups due to concurrent access to config routine
Some users of the RTL8187B have experienced difficulties since commit
49292d5635 that introduced the power
management wext hooks. This difficulty has not made much sense until
it was realized that it was possible for mac80211 to make a call to the
config routine while that routine was already being executed. On this
device, it is necessary to loopback the TX when changing channels. Unless
this is properly restored, the device will lockup. A mutex now protects
the device state, and the private data in several places.

The problem was found by Herton Ronaldo Krzesinski <herton@mandriva.com.br>,
who also suggested this type of fix.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:35 -04:00
Peter Chubb
bf4634afd8 rt2500pci: restoring missing line
In kernel version 2.6.26-rc9 my wireless LAN card worked; but in the
released 2.6.26, my RaLink rt2500 card wouldn't associate.

Git-bisect led me to this patch:

	61486e0f68
	rt2x00: Remove ieee80211_tx_control argument from write_tx_desc()

I believe that there is a problem with that patch --- it
(inadvertantly) removes an extra line of code, that used to set the
DATABYTE_COUNT field.

This patch reinstates that line, and with it my card works again.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:35 -04:00
Dan Williams
3b72b01d3a libertas: only enable rtap with mesh firmware
Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on
which the rtap functionality depends, only expose the rtap functionality
when mesh is also available.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Ivo van Doorn
d4764b29b6 rt2x00: Sequence counter should be protected in irqsave
The sequence counter can be accessed in IRQ context,
which means the lock protecting the counter should
be irqsave. To prevent making the entire intf->lock irqsave
without reason, create a new lock which only protects
the sequence counter.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Ivo van Doorn
8d8acd46fb rt2x00: Fix VGC lower bound initialization
When the EEPROM_BBPTUNE_VGC word is valid, we should
override EEPROM_BBPTUNE_VGCLOWER field with the BBP
value.

And we should _not_ do that when EEPROM_BBPTUNE_R17 is valid.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Ivo van Doorn
e6d3e90208 rt2x00: rt61pci needs another millisecond after firmware upload
After the hardware has indicated the firmware upload has completed
and the device is ready, we should wait another millisecond to
make sure the device is really ready to continue.

Without this timout, bringing the interface down and up again will
fail due to incorrect register initialization.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Ivo van Doorn
ada662f3eb rt2x00: Fix partial antenna configuration
The if-statement to determine the new TX/RX antenna
configuration was incomplete. It lacks the general
else-clause when the antenna wasn't changed.

This is a correct event, since it can occur when only
one of the antenna's has been changed or when the new
configuration is being forced (like when the interface
has just been added).

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Ivo van Doorn
d2b690714c rt2x00: Fix access permissions on debugfs files
Although most rt2x00 debugfs files don't contain
information which could compromise network security,
it is better to set the access permissions to root only.

This will be required when HW crypto is implemented,
because it could be possible to read the HW key from
the registers.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Andrea Merello
7c7e6af37d Rtl8187 PATCH add usb ID for asus wireless link
This patch from Davide Cavalca adds a usb ID for an rtl8187L device.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:34 -04:00
Tomas Winkler
143b09efb7 iwlwifi: don't stop queue in the middle of fragmented packet
This patch avoids stopping queue in the middle of the fragmented packet.
It is required that there will be ~10 (max packet/min fragment) or 16
(4 bits of frag number) free tfds all the time.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:33 -04:00
Helmut Schaa
8de394f602 ath5k: remove obsolete declaration of struct ieee80211_hw_mode
Signed-off-by: Helmut Schaa <hschaa@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:33 -04:00
Jiri Slaby
dc1968e7b7 Ath5k: mask out unneeded interrupts
Mask out previously demanded interrupt flags because we set
new ones. Don't allow mixing them after switch from sta to
ibss and vice versa.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:33 -04:00
Nick Kossifidis
f860ee26db ath5k: Update phy calibration functions
* Enable I/Q calibration each time we have correction results (we
   were only enabling calibration during reset). If we don't we commit
   the same results each time calibration routine is called.
 * Add some documentation and a TODO on nf calibration
 * Return -EAGAIN on noise floor timeout/failure

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:32 -04:00
Nick Kossifidis
cc6323c7d8 ath5k: Update channel functions
* Add channel function for RF2425 (got this from decompiling binary
   HAL, i have no idea why there is a 5GHz section but i'm looking
   into it)
 * Update RF5112 channel function (also got this from decompiling binary HAL)
 * Set JAPAN setting for channel 14 on all PHY chips

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:32 -04:00
Nick Kossifidis
27bcdeed32 ath5k: Add RF2425 initial rfgain values
* Add initial RF gain settings for RF2425

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:32 -04:00
Nick Kossifidis
df75dcddf9 ath5k: Reorder calibration calls during reset and update hw_set_power
* Update ath5k_hw_reset and add some more documentation about PHY calibration
 * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep
 * Preserve sleep duration field while setting AR5K_SLEEP_CTL
   and reduce delays & checks for register's status (got this from
   decompiling & dumps, it works for me but it needs testing)

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:32 -04:00
Nick Kossifidis
e2a0ccebc4 ath5k: Do ADC test during reset
* Do an ADC test during reset to match recent regdumps

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:32 -04:00
Nick Kossifidis
2203d6be7e ath5k: Misc hw_reset updates
* Update hw_reset to calculate some of the values we were using as static
 * Increase activation to rx delay

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:32 -04:00
Nick Kossifidis
e5a4ad0dda ath5k: Misc hw_attach fixes
* Correctly attach RF2425
 * Update SREV values for Radio chips
 * Update hw_attach to use new SPENDING values
 * Write a bit after POST for some chips

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:31 -04:00
Nick Kossifidis
ba37746e54 ath5k: Restore saved initval after POST
* Restore saved initial value after POST

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:31 -04:00
Nick Kossifidis
0bacdf303f ath5k: Update register list
* Update list of registers
* Use updated register macros inside hw.c, initvals.c and debug.c

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:31 -04:00
David S. Miller
c3f26a269c netdev: Fix lockdep warnings in multiqueue configurations.
When support for multiple TX queues were added, the
netif_tx_lock() routines we converted to iterate over
all TX queues and grab each queue's spinlock.

This causes heartburn for lockdep and it's not a healthy
thing to do with lots of TX queues anyways.

So modify this to use a top-level lock and a "frozen"
state for the individual TX queues.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 16:58:50 -07:00
Francois Romieu
3c4dc7115d via-velocity: velocity_init_{rd/tx}_ring use kcalloc(..., GFP_KERNEL).
Allocate and free everyting outside of the locked section.

Spotted-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Seguier Regis <rseguier@e-teleport.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-31 23:08:06 +02:00
Francois Romieu
0fe9f15ee8 via-velocity: separated struct allow wholesale copy during MTU changes.
It should help people fix the bugs in my code :o)

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-31 23:08:04 +02:00
Harvey Harrison
a97a6f1077 irda: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 17:20:18 -07:00
Matthew Garrett
1fa98174ba nsc-ircc: default to dongle type 9 on IBM hardware
This is necessary to set the dongle type on the nsc driver in order to get
it to work correctly.  Thinkpads all appear to use dongle type 9.  This
patch defaults nsc devices with an IBM PnP descriptor to use type 9.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30 17:19:35 -07:00
Rafael J. Wysocki
12dac0756d tg3: adapt tg3 to use reworked PCI PM code
Adapt the tg3 driver to use the reworked PCI PM and make it use the
exported PCI PM core functions instead of accessing the PCI PM registers
directly by itself.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 16:37:33 -07:00
Harvey Harrison
6a8341b68b net: use the common ascii hex helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 16:30:15 -07:00
David S. Miller
e62112c53a Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2008-07-30 15:44:30 -07:00
Julia Lawall
68905eb4dc drivers/net/ehea/ehea_main.c: Release mutex in error handling code
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.

The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 17:23:39 -04:00
Nobuhiro Iwamatsu
b0ca2a21f7 sh_eth: Add support of SH7763 to sh_eth
SH7763 has Ethernet core same as SH7710/SH7712.
Positions of some registry are different, but the basic part is the same.
I add support of ethernet of sh7763 to sh_eth.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 17:21:53 -04:00
Mikael Pettersson
d02a4e31ed fix NE2000 linkage error
Trying to build with CONFIG_NE2000=m fails with:

  scripts/mod/modpost   -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers    -S     -s
ERROR: "NS8390_init" [drivers/net/ne.ko] undefined!

This is because the split of 8390 into pausing and non-pausing
versions was incompletely propagated to ne.c. This fixes it.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 17:14:57 -04:00
Alan Cox
4e891910f5 [netdrvr] wd: fix build breakage with new NS8390p API
From: Alan Cox <alan@redhat.com>

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 04:48:22 -04:00
Peter Korsgaard
16d78bc255 dm9601: don't do usb transfers of data on stack
dm_{read,write}() were doing USB transfers of data on stack, which isn't
allowed. Fix it by kmalloc'ing a temporary buffer.
Clean up the error handling for short transfers while we're at it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 04:43:49 -04:00
Andreas Schwab
38c080ffa9 niu: Fix error checking in niu_ethflow_to_class.
The callers of niu_ethflow_to_class expect zero as error, but it returns
-1 instead.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-29 23:59:20 -07:00
David S. Miller
e93dc4891d Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2008-07-29 21:51:00 -07:00
Breno Leitao
dc56e634c8 S2io: fix statistics flush after a MTU change
On s2io driver, when you change the interface MTU, it invokes a card
reset, which flush some statistics.  This patch solves this problem, and
also set the net_device->stats as the default statistics structure,
instead of s2io_nic->stats.

To do that, s2io_nic->stats turned into a staging area, where is saved
statistics of the last hardware statistics query. So, the difference
between the current hardware statistics and s2io_nic->stats, is the
value that should be summed up, in order to get the correct statistics
value, even after a reset.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 18:24:30 -04:00
David Brownell
c7b7b04206 enc28j60: don't specify (wrong) IRQ type
Recent changes to the IRQ framework have made passing the wrong
trigger type to request_irq() become a fatal error.  In the case
of the enc28j60 driver, it stopped working in my test harness.

(Specifically:  the signal detects "pin change" events, both edges,
not just falling edges.  Similarly, other boards might route it
through an inverter.  Trigger type are board-specific.)

This fixes that problem by the usual fix of expecting board setup
code to have set up the correct IRQ trigger type.  The best known
example of that being x86 setup.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 18:24:20 -04:00
Stephen Hemminger
74dfd9fb0a blackfin_mac: unneeded assignment
skb->dev is set by eth_type_trans already.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 18:24:14 -04:00
Jeff Garzik
16b237dc44 Merge branch 'for-2.6.27' of git://git.marvell.com/mv643xx_eth into upstream-fixes 2008-07-29 18:23:13 -04:00
Steve Wise
8051367586 cxgb3: Allow 64KB firmware images.
Starting with FW version 7.0, the driver needs to allow larger images.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 17:48:42 -04:00
Michael Hennerich
ee02fee8f6 Blackfin EMAC Driver: Functional power management support
Reprogram MAC address after resume from Suspend Mem
(Blackfin Hibernate looses all CORE and SYSTEM register content)

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 17:48:35 -04:00
Bryan Wu
a50c0c05c3 Blackfin EMAC Driver: enable TXDWA new feature for new silicon (rev > 0.2)
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 17:48:32 -04:00
Mike Frysinger
d7b843d393 Blackfin EMAC Driver: add proper __devinit/__devexit markings
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 17:48:27 -04:00
Ayaz Abdulla
22ae03a190 forcedeth bug fix: realtek phy 8211c errata
This patch adds support for the realtek 8211c phy. The driver must
perform a hardware reset of the phy due to an errata where the phy could
not detect the link.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29 17:48:22 -04:00
Vegard Nossum
77bbadd5ea PS3: gelic: use unsigned long for irqflags
The semantic patch I used was this:

@@
expression lock;
identifier flags;
expression subclass;
@@

- unsigned int flags;
+ unsigned long flags;

...

<+...

(
 spin_lock_irqsave(lock, flags)
|
 _spin_lock_irqsave(lock)
|
 spin_unlock_irqrestore(lock, flags)
|
 _spin_unlock_irqrestore(lock, flags)
|
 read_lock_irqsave(lock, flags)
|
 _read_lock_irqsave(lock)
|
 read_unlock_irqrestore(lock, flags)
|
 _read_unlock_irqrestore(lock, flags)
|
 write_lock_irqsave(lock, flags)
|
 _write_lock_irqsave(lock)
|
 write_unlock_irqrestore(lock, flags)
|
 _write_unlock_irqrestore(lock, flags)
|
 spin_lock_irqsave_nested(lock, flags, subclass)
|
 _spin_lock_irqsave_nested(lock, subclass)
|
 spin_unlock_irqrestore(lock, flags)
|
 _spin_unlock_irqrestore(lock, flags)
|
 _raw_spin_lock_flags(lock, flags)
|
 __raw_spin_lock_flags(lock, flags)
)

...+>

This patch was generated using the Coccinelle framework.

Cc: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Cc: Julia Lawall <julia@diku.dk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:08 -04:00
Johannes Berg
d0f0980414 mac80211: partially fix skb->cb use
This patch fixes mac80211 to not use the skb->cb over the queue step
from virtual interfaces to the master. The patch also, for now,
disables aggregation because that would still require requeuing,
will fix that in a separate patch. There are two other places (software
requeue and powersaving stations) where requeue can happen, but that is
not currently used by any drivers/not possible to use respectively.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:08 -04:00
Larry Finger
0ccd58fc03 rtl8187: Improve wireless statistics for RTL8187B
Wireless statistics produced by the RTL8187B driver are not particularly
informative about the strength of the received signal. From the data sheet
provided by Realtek, I discovered that certain parts of the RX header
should have the information necessary to calculate signal quality and
strength. With testing, it became clear that most of these quantities were
very jittery - only the AGC correlated with the signals expected from nearby
AP's. As a result, the quality and strength are derived from the agc value.
The scaling has been determined so that the numbers are close to those
obtained by b43 under the same conditions. The results are qualitatively
correct.

Statistics derived for the RTL8187 have not been changed.

The RX header variables have been renamed to match the quantites described
in the Realtek data sheet.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:08 -04:00
Larry Finger
1f690d7b54 rtl8187: Fix for TX sequence number problem
"mac80211: fix TX sequence numbers" broke rtl8187. This
patch makes the same kind of fix that was done for rt2x00. Note that
this code will have to be reworked for proper sequence numbers on beacons.
In addition, the sequence number has been placed in the hardware state,
not the vif state.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:08 -04:00
Harvey Harrison
0b06b2ae0e mac80211: fix sparse integer as NULL pointer warning
drivers/net/wireless/mac80211_hwsim.c:503:20: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:07 -04:00
Andrew Morton
031211049b drivers/net/wireless/iwlwifi/iwl-led.c: printk fix
ia64:

drivers/net/wireless/iwlwifi/iwl-led.c: In function `iwl_get_blink_rate':
drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, s64 arg (arg 6)
drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, u64 arg (arg 7)

We do not know what type the architecture uses to impement u64 and s64,
hence we must cast the variables for printing.

Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:07 -04:00
Ivo van Doorn
9c0ab712c7 rt2x00: Clear queue entry flags during initialization
When the queues are being initialized the entry flags fields must be
reset to 0. When this does not happen some entries might still be
marked as "occupied" after an ifdown & ifup cycle which would trigger
errors when the entry is being accessed:

	phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0.
	Please file bug report to http://rt2x00.serialmonkey.com.

This also fixes the mac80211 warning:

	------------[ cut here ]------------
	WARNING: at net/mac80211/tx.c:1238 ieee80211_master_start_xmit+0x30a/0x350 [mac80211]()

which was triggered by the queue error.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:06 -04:00
Ivo van Doorn
74c0ee9b59 rt2x00: Force full register config after start()
rt2x00 will only perform configuration changes from
mac80211 when the configuration option has changed.
This means it keeps track of the current active configuration
and will check these values when the config() callback function
is used.

However this causes breakage when the interface has been
brought down and up again, since all stored active values
aren't reset while the registers might have.
This is for example the case with rt61pci antenna registers which
will jump to invalid values when the interface has been started.

To make sure a full configuration takes place after the start()
callback function, a new flag is added which will be checked
during config() and skips the "what's changed" phase.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:06 -04:00
Julia Lawall
4104863fb4 b43legacy: Release mutex in error handling code
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.

The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:05 -04:00
Julia Lawall
80c42affad drivers/net/wireless/ipw2100.c: Release mutex in error handling code
The mutex is released on a successful return, so it would seem that it
should be released on an error return as well.

The semantic patch finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression l;
@@

mutex_lock(l);
... when != mutex_unlock(l)
    when any
    when strict
(
if (...) { ... when != mutex_unlock(l)
+   mutex_unlock(l);
    return ...;
}
|
mutex_unlock(l);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:05 -04:00
Ivo van Doorn
e7087a828f rt2x00: Fix memleak when RTS/CTS fails
When sending the RTS/CTS frame fails, we should
free the skb buffer which was created.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:05 -04:00
Ivo van Doorn
5adf6d63c1 rt2x00: Fix QOS sequence counting
When IEEE80211_TX_CTL_ASSIGN_SEQ is not set,
the driver should disable hardware sequence counting
to make sure the mac80211 provided counter is used.
This fixes QOS sequence counting, since that is one
of the cases where mac80211 provides a seperate
sequence counter.

By moving the sequence counting code to rt2x00queue
we make sure that _all_ frames get the sequence counter,
including RTS/CTS and Beacon frames.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:05 -04:00
Iwo Mergler
b93ce437eb rt2x00: Fix the beacon length bug
When setting up a beacon template, the length of the beacon is
calculated with the assumption that the SKB already contains
the Tx descriptor. In the case of beacons it doesn't.

This patch undoes the damage by adding the Tx descriptor length
to the beacon length. This is safe, because the shortest possible
beacon is longer than the Tx header.

Signed-off-by: Iwo Mergler <Iwo@call-direct.com.au>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:05 -04:00
Iwo Mergler
3e0c1abe74 rt2x00: Large vendor requests for rt73usb firmware upload and beacons
Switches rt73usb to use large vendor requests for firmware
and beacons. This also fixes the garbled beacon bug.

Signed-off-by: Iwo Mergler <Iwo@call-direct.com.au>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:05 -04:00
Iwo Mergler
ed0dbeeb92 rt2x00: Support for large vendor requests
Adds an extra rt2x00 vendor request function to support register
transfers beyond the CSR_CACHE_SIZE / USB packet size limit. This
is useful for firmware uploads, beacon templates and keys, all
of which are to large to do with a single USB request.

Signed-off-by: Iwo Mergler <Iwo@call-direct.com.au>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:04 -04:00
Ivo van Doorn
f2fdbc4847 rt2x00: Fix EIFS timing value
Olivier reported a difference between the EIFS
values used in the legacy driver and the one in
the rt2x00 drivers.

In rt2x00 the value was
	( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) )
which comes down to 314us while the legacy driver uses the value 364us

This was caused because EIFS is: SIFS + DIFS + AckTime
This patch will fix this by adding the DIFS by the above value,
and creating a SHORT_EIFS define which uses the SHORT_DIFS.

Reported-by: Olivier Cornu <o.cornu@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:04 -04:00
Ivo van Doorn
ed06387b44 rt2x00: Remove duplicate declaration
rt2x00queue_free_skb() was declared twice.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:04 -04:00
Pavel Roskin
256b152b00 ath5k: don't enable MSI, we cannot handle it yet
MSI is a nice thing, but we cannot enable it without changing the
interrupt handler.  If we do it, we break MSI capable hardware,
specifically AR5006 chipset.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:04 -04:00
Bob Copeland
bc05116ab3 ath5k: fix recursive locking in ath5k_beacon_update
ath5k_beacon_update takes sc->lock upon entry.  However, it is only
called from within ath5k_config_interface, which already holds the lock.
Remove the unnecessary locking from ath5k_beacon_update.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:04 -04:00
Denis V. Lunev
cb9289cb79 iwlwifi: small compile warnings without CONFIG_IWLWIFI_DEBUG
CC [M]  drivers/net/wireless/iwlwifi/iwl-scan.o
drivers/net/wireless/iwlwifi/iwl-scan.c: In function 'iwl_rx_scan_complete_notif':
drivers/net/wireless/iwlwifi/iwl-scan.c:274: warning: unused variable 'scan_notif'

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:03 -04:00
Denis V. Lunev
c0b6a1c9be iwlwifi: compilation error when CONFIG_IWLWIFI_DEBUG is not set
CC [M]  drivers/net/wireless/iwlwifi/iwl-rfkill.o
drivers/net/wireless/iwlwifi/iwl-led.c: In function 'iwl_led_brightness_set':
drivers/net/wireless/iwlwifi/iwl-led.c:198: error: 'led_type_str' undeclared (first use in this function)
drivers/net/wireless/iwlwifi/iwl-led.c:198: error: (Each undeclared identifier is reported only once
drivers/net/wireless/iwlwifi/iwl-led.c:198: error: for each function it appears in.)

The problem is that led_type_str is defined under CONFIG_IWLWIFI_DEBUG
while IWL_DEBUG is a static inline function in this case. Replace it
with macro.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:03 -04:00
Brian Cavagnolo
fb904907fb libertas: check bounds and only use decimal for sysfs persistent features.
Some persistent settings were using hex and others decimal.  In some cases,
values were set in hex but reported in decimal.  Confusing.

Signed-off-by: Brian Cavagnolo <brian@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:03 -04:00
Rami Rosen
699669f331 iwl-3945: add #ifdef CONFIG_IWL3945_LEDS to avoid compile warning.
When building the wireless-next-2.6 tree with CONFIG_IWL3945 (for building
iwl-3945 driver) and where CONFIG_IWL3945_LEDS is not set,
we get this warning:
drivers/net/wireless/iwlwifi/iwl-3945.c: In function
'iwl3945_pass_packet_to_mac80211':
drivers/net/wireless/iwlwifi/iwl-3945.c:633: warning: unused variable 'hdr'

This patch adds #ifdef to iwl3945_pass_packet_to_mac80211() to avoid this
warning. (The variable 'hdr' is used only if CONFIG_IWL3945_LEDS is set)

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:55:03 -04:00
Bob Copeland
734b5aa911 ath5k: use positive logic for HP laptop LEDs
Helge Deller reports that HP laptops (NC4010 and NC6000) use active-
high signals to turn on the LEDs.  Previous code used active-low for
all devices.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:30 -04:00
Jiri Slaby
3e4242b99c Ath5k: suspend/resume fixes
- free and re-request irq since it might have changed during suspend
- disable and enable msi
- don't set D0 state of the device, it's already done by the PCI layer
- do restore_state before enable_device, it's safer
- check ath5k_init return value

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:29 -04:00
Jiri Slaby
e86600c7b4 Ath5k: fix dma operation
Don't sync
- coherent mapping (descriptors)
- before unmap, it's useless
- (wrongly anyway -- for_cpu) beacon skb, it's just mapped,
  so by the device yet

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:28 -04:00
Jiri Slaby
274c7c3638 Ath5k: flush work
Make sure that the irq is not in progress after stop. This means
two things:
- ensure the intr setting register is set by flushing posted values
- call synchronize_irq() after that

Also flush stop tx write, inform callers of the tx stop about still
pending transfers (unsuccessful stop) and finally don't wait another
3ms in ath5k_rx_stop, since ath5k_hw_stop_rx_dma ensures transfer to
be finished.

Make sure all writes will be ordered in respect to locks by mmiowb().

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:27 -04:00
Jiri Slaby
10488f8ad6 Ath5k: kill tasklets on shutdown
Don't forget to kill tasklets on stop to not panic if they
fire after freeing some structures.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:26 -04:00
Jiri Slaby
3a0f2c8718 Ath5k: fix memory corruption
When signal is noisy, hardware can use all RX buffers and since the last
entry in the list is self-linked, it overwrites the entry until we link
new buffers.

Ensure that we don't free this last one until we are 100% sure that it
is not used by the hardware anymore to not cause memory curruption as
can be seen below.

This is done by checking next buffer in the list. Even after that we
know that the hardware refetched the new link and proceeded further
(the next buffer is ready) we can finally free the overwritten buffer.

We discard it since the status in its descriptor is overwritten (OR-ed
by new status) too.

=============================================================================
BUG kmalloc-4096: Poison overwritten
-----------------------------------------------------------------------------

INFO: 0xffff810067419060-0xffff810067419667. First byte 0x8 instead of 0x6b
INFO: Allocated in dev_alloc_skb+0x18/0x30 age=1118 cpu=1 pid=0
INFO: Freed in skb_release_data+0x85/0xd0 age=1105 cpu=1 pid=3718
INFO: Slab 0xffffe200019d0600 objects=7 used=0 fp=0xffff810067419048 flags=0x40000000000020c3
INFO: Object 0xffff810067419048 @offset=4168 fp=0xffff81006741c120

Bytes b4 0xffff810067419038:  4f 0b 02 00 01 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a O.......ZZZZZZZZ
  Object 0xffff810067419048:  6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
  Object 0xffff810067419058:  6b 6b 6b 6b 6b 6b 6b 6b 08 42 30 00 00 0b 6b 80 kkkkkkkk.B0...k.
  Object 0xffff810067419068:  f0 5d 00 4f 62 08 a3 64 00 0c 42 16 52 e4 f0 5a 360].Ob.243d..B.R344360Z
  Object 0xffff810067419078:  68 81 00 00 7b a5 b4 be 7d 3b 8f 53 cd d5 de 12 h...{245264276};.S315325336.
  Object 0xffff810067419088:  96 10 0b 89 48 54 23 41 0f 4e 2d b9 37 c3 cb 29 ....HT#A.N-2717303313)
  Object 0xffff810067419098:  d1 e0 de 14 8a 57 2a cc 3b 44 0d 78 7a 19 12 15 321340336..W*314;D.xz...
  Object 0xffff8100674190a8:  a9 ec d4 35 a8 10 ec 8c 40 a7 06 0a 51 a7 48 bb 2513543245250.354.@247..Q247H273
  Object 0xffff8100674190b8:  3e cf a1 c7 38 60 63 3f 51 15 c7 20 eb ba 65 30 >ϡ3078`c?Q.307.353272e0
 Redzone 0xffff81006741a048:  bb bb bb bb bb bb bb bb                         273273273273273273273273
 Padding 0xffff81006741a088:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
Pid: 3297, comm: ath5k_pci Not tainted 2.6.26-rc8-mm1_64 #427

Call Trace:
 [<ffffffff802a7306>] print_trailer+0xf6/0x150
 [<ffffffff802a7485>] check_bytes_and_report+0x125/0x180
 [<ffffffff802a75dc>] check_object+0xac/0x260
 [<ffffffff802a9308>] __slab_alloc+0x368/0x6d0
 [<ffffffff80544f82>] ? wireless_send_event+0x142/0x310
 [<ffffffff804b1bd4>] ? __alloc_skb+0x44/0x150
 [<ffffffff80544f82>] ? wireless_send_event+0x142/0x310
 [<ffffffff802aa853>] __kmalloc_track_caller+0xc3/0xf0
 [<ffffffff804b1bfe>] __alloc_skb+0x6e/0x150
[... stack snipped]

FIX kmalloc-4096: Restoring 0xffff810067419060-0xffff810067419667=0x6b

FIX kmalloc-4096: Marking all objects used

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:25 -04:00
Johannes Berg
605a0bd66d mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flag
I forgot this in the previous patch that made it unused.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29 16:36:24 -04:00
Stephen Rothwell
c713e7cbfa ibmveth: Fix multiple errors with dma_mapping_error conversion
The addition of an argument to dma_mapping_error() in commit
8d8bb39b9e "dma-mapping: add the device
argument to dma_mapping_error()" left a bit of fallout:

drivers/net/ibmveth.c:263: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:264: error: expected ')' before 'goto'
drivers/net/ibmveth.c:284: error: expected expression before '}' token
drivers/net/ibmveth.c:297: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:298: error: expected ')' before 'dma_unmap_single'
drivers/net/ibmveth.c:306: error: expected expression before '}' token
drivers/net/ibmveth.c:491: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:927: error: too few arguments to function 'dma_mapping_error'
drivers/net/ibmveth.c:927: error: expected ')' before '{' token
drivers/net/ibmveth.c:974: error: expected expression before '}' token
drivers/net/ibmveth.c:914: error: label 'out' used but not defined m

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28 16:30:51 +10:00
Linus Torvalds
8be1a6d6c7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files
  mlx4_core: Add VLAN tag field to WQE control segment struct
  RDMA/nes: CM connection setup/teardown rework
  IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUG
  IPoIB/cm: Connected mode is no longer EXPERIMENTAL
  RDMA/ucm: BKL is not needed for ib_ucm_open()
  RDMA/ucma: BKL is not needed for ucma_open()
2008-07-26 20:40:36 -07:00
Linus Torvalds
4836e30078 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (39 commits)
  [PATCH] fix RLIM_NOFILE handling
  [PATCH] get rid of corner case in dup3() entirely
  [PATCH] remove remaining namei_{32,64}.h crap
  [PATCH] get rid of indirect users of namei.h
  [PATCH] get rid of __user_path_lookup_open
  [PATCH] f_count may wrap around
  [PATCH] dup3 fix
  [PATCH] don't pass nameidata to __ncp_lookup_validate()
  [PATCH] don't pass nameidata to gfs2_lookupi()
  [PATCH] new (local) helper: user_path_parent()
  [PATCH] sanitize __user_walk_fd() et.al.
  [PATCH] preparation to __user_walk_fd cleanup
  [PATCH] kill nameidata passing to permission(), rename to inode_permission()
  [PATCH] take noexec checks to very few callers that care
  Re: [PATCH 3/6] vfs: open_exec cleanup
  [patch 4/4] vfs: immutable inode checking cleanup
  [patch 3/4] fat: dont call notify_change
  [patch 2/4] vfs: utimes cleanup
  [patch 1/4] vfs: utimes: move owner check into inode_change_ok()
  [PATCH] vfs: use kstrdup() and check failing allocation
  ...
2008-07-26 20:23:44 -07:00
Linus Torvalds
2284284281 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netns: fix ip_rt_frag_needed rt_is_expired
  netfilter: nf_conntrack_extend: avoid unnecessary "ct->ext" dereferences
  netfilter: fix double-free and use-after free
  netfilter: arptables in netns for real
  netfilter: ip{,6}tables_security: fix future section mismatch
  selinux: use nf_register_hooks()
  netfilter: ebtables: use nf_register_hooks()
  Revert "pkt_sched: sch_sfq: dump a real number of flows"
  qeth: use dev->ml_priv instead of dev->priv
  syncookies: Make sure ECN is disabled
  net: drop unused BUG_TRAP()
  net: convert BUG_TRAP to generic WARN_ON
  drivers/net: convert BUG_TRAP to generic WARN_ON
2008-07-26 20:17:56 -07:00
Al Viro
516e0cc564 [PATCH] f_count may wrap around
make it atomic_long_t; while we are at it, get rid of useless checks in affs,
hfs and hpfs - ->open() always has it equal to 1, ->release() - to 0.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:40 -04:00
Nick Piggin
e286781d5f mm: speculative page references
If we can be sure that elevating the page_count on a pagecache page will
pin it, we can speculatively run this operation, and subsequently check to
see if we hit the right page rather than relying on holding a lock or
otherwise pinning a reference to the page.

This can be done if get_page/put_page behaves consistently throughout the
whole tree (ie.  if we "get" the page after it has been used for something
else, we must be able to free it with a put_page).

Actually, there is a period where the count behaves differently: when the
page is free or if it is a constituent page of a compound page.  We need
an atomic_inc_not_zero operation to ensure we don't try to grab the page
in either case.

This patch introduces the core locking protocol to the pagecache (ie.
adds page_cache_get_speculative, and tweaks some update-side code to make
it work).

Thanks to Hugh for pointing out an improvement to the algorithm setting
page_count to zero when we have control of all references, in order to
hold off speculative getters.

[kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()]
[hugh@veritas.com: fix add_to_page_cache]
[akpm@linux-foundation.org: repair a comment]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:06 -07:00
FUJITA Tomonori
8d8bb39b9e dma-mapping: add the device argument to dma_mapping_error()
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:03 -07:00
Ilpo Järvinen
53e5e96ec1 drivers/net: convert BUG_TRAP to generic WARN_ON
Removes legacy reinvent-the-wheel type thing. The generic
machinery integrates much better to automated debugging aids
such as kerneloops.org (and others), and is unambiguous due to
better naming. Non-intuively BUG_TRAP() is actually equal to
WARN_ON() rather than BUG_ON().

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25 21:40:45 -07:00
Linus Torvalds
5047887caf Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
  powerpc: Wireup new syscalls
  Move update_mmu_cache() declaration from tlbflush.h to pgtable.h
  powerpc/pseries: Remove kmalloc call in handling writes to lparcfg
  powerpc/pseries: Update arch vector to indicate support for CMO
  ibmvfc: Add support for collaborative memory overcommit
  ibmvscsi: driver enablement for CMO
  ibmveth: enable driver for CMO
  ibmveth: Automatically enable larger rx buffer pools for larger mtu
  powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O
  powerpc/pseries: vio bus support for CMO
  powerpc/pseries: iommu enablement for CMO
  powerpc/pseries: Add CMO paging statistics
  powerpc/pseries: Add collaborative memory manager
  powerpc/pseries: Utilities to set firmware page state
  powerpc/pseries: Enable CMO feature during platform setup
  powerpc/pseries: Split retrieval of processor entitlement data into a helper routine
  powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg
  powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines
  powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg
  powerpc: Fix compile error with binutils 2.15
  ...

Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.
2008-07-25 11:08:17 -07:00
Jack Morgenstein
51a379d0c8 mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files
Update existing Mellanox copyright lines to 2008, and add such lines
to files where they are missing.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-25 10:32:52 -07:00
Robert Jennings
1096d63d8e ibmveth: enable driver for CMO
Enable ibmveth for Cooperative Memory Overcommitment (CMO).  For this driver
it means calculating a desired amount of IO memory based on the current MTU
and updating this value with the bus when MTU changes occur.  Because DMA
mappings can fail, we have added a bounce buffer for temporary cases where
the driver can not map IO memory for the buffer pool.

The following changes are made to enable the driver for CMO:
 * DMA mapping errors will not result in error messages if entitlement has
   been exceeded and resources were not available.
 * DMA mapping errors are handled gracefully, ibmveth_replenish_buffer_pool()
   is corrected to check the return from dma_map_single and fail gracefully.
 * The driver will have a get_desired_dma function defined to function
   in a CMO environment.
 * When the MTU is changed, the driver will update the device IO entitlement

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Santiago Leon <santil@us.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25 15:44:44 +10:00
Santiago Leon
ea866e6526 ibmveth: Automatically enable larger rx buffer pools for larger mtu
Activates larger rx buffer pools when the MTU is changed to a larger
value.  This patch de-activates the large rx buffer pools when the MTU
changes to a smaller value.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-25 15:44:44 +10:00
Rusty Russell
fb6813f480 virtio: Recycle unused recv buffer pages for large skbs in net driver
If we hack the virtio_net driver to always allocate full-sized (64k+)
skbuffs, the driver slows down (lguest numbers):

  Time to receive 1GB (small buffers): 10.85 seconds
  Time to receive 1GB (64k+ buffers): 24.75 seconds

Of course, large buffers use up more space in the ring, so we increase
that from 128 to 2048:

  Time to receive 1GB (64k+ buffers, 2k ring): 16.61 seconds

If we recycle pages rather than using alloc_page/free_page:

  Time to receive 1GB (64k+ buffers, 2k ring, recycle pages): 10.81 seconds

This demonstrates that with efficient allocation, we don't need to
have a separate "small buffer" queue.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:02 +10:00
Herbert Xu
97402b96f8 virtio net: Allow receiving SG packets
Finally this patch lets virtio_net receive GSO packets in addition
to sending them.  This can definitely be optimised for the non-GSO
case.  For comparison the Xen approach stores one page in each skb
and uses subsequent skb's pages to construct an SG skb instead of
preallocating the maximum amount of pages per skb.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (added feature bits)
2008-07-25 12:06:01 +10:00
Herbert Xu
a9ea3fc6f2 virtio net: Add ethtool ops for SG/GSO
This patch adds some basic ethtool operations to virtio_net so
I could test SG without GSO (which was really useful because TSO
turned out to be buggy :)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (remove MTU setting)
2008-07-25 12:06:01 +10:00
Mark McLoughlin
9953ca6cb7 virtio: fix virtio_net xmit of freed skb bug
On Mon, 2008-05-26 at 17:42 +1000, Rusty Russell wrote:
> If we fail to transmit a packet, we assume the queue is full and put
> the skb into last_xmit_skb.  However, if more space frees up before we
> xmit it, we loop, and the result can be transmitting the same skb twice.
>
> Fix is simple: set skb to NULL if we've used it in some way, and check
> before sending.
...
> diff -r 564237b31993 drivers/net/virtio_net.c
> --- a/drivers/net/virtio_net.c	Mon May 19 12:22:00 2008 +1000
> +++ b/drivers/net/virtio_net.c	Mon May 19 12:24:58 2008 +1000
> @@ -287,21 +287,25 @@ again:
>  	free_old_xmit_skbs(vi);
>
>  	/* If we has a buffer left over from last time, send it now. */
> -	if (vi->last_xmit_skb) {
> +	if (unlikely(vi->last_xmit_skb)) {
>  		if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
>  			/* Drop this skb: we only queue one. */
>  			vi->dev->stats.tx_dropped++;
>  			kfree_skb(skb);
> +			skb = NULL;
>  			goto stop_queue;
>  		}
>  		vi->last_xmit_skb = NULL;

With this, may drop an skb and then later in the function discover that
we could have sent it after all. Poor wee skb :)

How about the incremental patch below?

Cheers,
Mark.

Subject: [PATCH] virtio_net: Delay dropping tx skbs

Currently we drop the skb in start_xmit() if we have a
queued buffer and fail to transmit it.

However, if we delay dropping it until we've stopped the
queue and enabled the tx notification callback, then there
is a chance space might become available for it.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-25 12:06:00 +10:00
Linus Torvalds
5c402355ad Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  MAINTAINERS: Remove Glenn Streiff from NetEffect entry
  mlx4_core: Improve error message when not enough UAR pages are available
  IB/mlx4: Add support for memory management extensions and local DMA L_Key
  IB/mthca: Keep free count for MTT buddy allocator
  mlx4_core: Keep free count for MTT buddy allocator
  mlx4_code: Add missing FW status return code
  IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg
  mlx4_core: Add module parameter to enable QoS support
  RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes
  IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures
  IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()
  IB/ehca: Release mutex in error path of alloc_small_queue_page()
  IB/ehca: Use default value for Local CA ACK Delay if FW returns 0
  IB/ehca: Filter PATH_MIG events if QP was never armed
  IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event
  RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event
  RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
2008-07-24 12:56:07 -07:00
Linus Torvalds
3fde80e94c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: put ColdFire head code into .text.head section
  m68knommu: remove last use of CONFIG_FADS and CONFIG_RPXCLASSIC
  m68knommu: remove RPXCLASSIC from the m68k tree
  m68knommu: fec: remove FADS
  m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS support
  m68knommu: add read_barrier_depends() and irqs_disabled_flags()
  m68knommu: add byteswap assembly opcode for ISA A+
  m68knommu: add ffs and __ffs plattform which support ISA A+ or ISA C
  m68knommu: add sched_clock() for the DMA timer
  m68knommu: complete generic time
  m68knommu: move code within time.c
  m68knommu: m68knommu: add old stack trace method
  m68knommu: Add Coldfire DMA Timer support
  m68knommu: defconfig for M5407C3 board
  m68knommu: defconfig for M5307C3 board
  m68knommu: defconfig for M5275EVB board
  m68knommu: defconfig for M5249EVB board
  m68knommu: change to a configs directory for board configurations
2008-07-24 12:17:19 -07:00
Linus Torvalds
c3c2233d84 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  pkt_sched: sch_sfq: dump a real number of flows
  atm: [fore200e] use MODULE_FIRMWARE() and other suggested cleanups
  netfilter: make security table depend on NETFILTER_ADVANCED
  tcp: Clear probes_out more aggressively in tcp_ack().
  e1000e: fix e1000_netpoll(), remove extraneous e1000_clean_tx_irq() call
  net: Update entry in af_family_clock_key_strings
  netdev: Remove warning from __netif_schedule().
  sky2: don't stop queue on shutdown
2008-07-24 12:14:58 -07:00
Andrea Righi
27ac792ca0 PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:21 -07:00
Lennert Buytenhek
ac0a2d0c8a mv643xx_eth: bump version to 1.2
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:59 +02:00
Lennert Buytenhek
e32b661750 mv643xx_eth: enable hardware TX checksumming with vlan tags
Although mv643xx_eth has no hardware support for inserting a vlan
tag by twiddling some bits in the TX descriptor, it does support
hardware TX checksumming on packets where the IP header starts {a
limited set of values other than 14} bytes into the packet.

This patch sets mv643xx_eth's ->vlan_features to NETIF_F_SG |
NETIF_F_IP_CSUM, which prevents the stack from checksumming vlan'ed
packets in software, and if vlan tags are present on a transmitted
packet, notifies the hardware of this fact by toggling the right
bits in the TX descriptor.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:59 +02:00
Lennert Buytenhek
2f7eb47a7b mv643xx_eth: print message on link status change
When there is a link status change (link or phy status interrupt),
print a message notifying the user of the new link status.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:59 +02:00
Lennert Buytenhek
81600eea98 mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface
The mv643xx_eth hardware has a provision for polling the PHY's
MII management registers to obtain the (R)(G)MII interface speed
(10/100/1000) and duplex (half/full) and pause (off/symmetric)
settings to use to talk to the PHY.

The driver currently does not make use of this feature.  Instead,
whenever there is a link status change event, it reads the current
link parameters from the PHY, and programs those parameters into
the mv643xx_eth MAC by hand.

This patch switches the mv643xx_eth driver to letting the MAC
auto-determine the (R)(G)MII link parameters by PHY polling, if there
is a PHY present.  For PHYless ports (when e.g. the (R)(G)MII
interface is connected to a hardware switch), we keep hardcoding the
MII interface parameters.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:59 +02:00
Lennert Buytenhek
7dde154d3d mv643xx_eth: print driver version on init
Print the mv643xx_eth driver version on init to help debugging.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:58 +02:00
Lennert Buytenhek
7f106c1d05 mv643xx_eth: use symbolic MII register addresses and values
Instead of hardcoding MII register addresses and values, use the
symbolic constants defined in linux/mii.h.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:58 +02:00
Lennert Buytenhek
cd4ccf76bf mv643xx_eth: use longer DMA bursts
The mv643xx_eth driver is limiting DMA bursts to 32 bytes, while
using the largest burst size (128 bytes) gives a couple percentage
points performance improvement in throughput tests, and the docs
say that the 128 byte default should not need to be changed, so
use 128 byte bursts instead.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:51 +02:00
Lennert Buytenhek
ae9ae06443 mv643xx_eth: also check TX_IN_PROGRESS when disabling transmit path
The recommended sequence for waiting for the transmit path to clear
after disabling all of the transmit queues is to wait for the
TX_FIFO_EMPTY bit in the Port Status register to become set as well
as the TX_IN_PROGRESS bit to clear.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:51 +02:00
Lennert Buytenhek
65193a91fc mv643xx_eth: don't fiddle with maximum receive packet size setting
The maximum receive packet size field in the Port Serial Control
register controls at what size received packets are flagged
overlength in the receive descriptor, but it doesn't prevent
overlength packets from being DMAd to memory and signaled to the
host like other received packets.

mv643xx_eth does not support receiving jumbo frames in 10/100 mode,
but setting the packet threshold to larger than 1522 bytes in 10/100
mode won't cause breakage by itself.

If we really want to enforce maximum packet size on the receiving
end instead of on the sending end where it should be done, we can
always just add a length check to the software receive handler
instead of relying on the hardware to do the comparison for us.

What's more, changing the maximum packet size field requires
temporarily disabling the RX/TX paths.  So once the link comes
up in 10/100 Mb/s mode or 1000 Mb/s mode, we'd have to disable it
again just to set the right maximum packet size field (1522 in
10/100 Mb/s mode or 9700 in 1000 Mb/s mode), just so that we can
offload one comparison operation to hardware that we might as well
do in software, assuming that we'd want to do it at all.

Contrary to what the documentation suggests, there is no harm in
just setting a 9700 byte maximum packet size in 10/100 mode, so use
the maximum maximum packet size for all modes.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:51 +02:00
Lennert Buytenhek
4dfc1c87af mv643xx_eth: fix transmit-reclaim-in-napi-poll
The mv643xx_eth driver allows doing transmit reclaim from within the
napi poll routine, but after doing reclaim, it would forget to check
the free transmit descriptor count and wake up the transmit queue if
the reclaim caused enough descriptors for a new packet to become
available.  This would cause the netdev watchdog to occasionally kick
in during certain workloads with combined receive and transmit traffic.

Fix this by adding a wakeup check identical to the one in the
interrupt handler to the napi poll routine.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:51 +02:00
Lennert Buytenhek
6b368f6859 mv643xx_eth: prevent breakage when link goes down during transmit
When the ethernet link goes down while mv643xx_eth is transmitting
data, transmit DMA can stop before all queued transmit descriptors
have been processed.  But even the descriptors that _have_ been
processed might not be properly marked as done before the transmit
DMA unit shuts down.

Then when the link comes up again, the hardware transmit pointer
might have advanced while not all previous packet descriptors have
been marked as transmitted, causing software transmit reclaim to
hang waiting for the hardware to finish transmitting a descriptor
that it has already skipped.

This patch forcibly reclaims all packets on the transmit ring on a
link down interrupt, and then resyncs the hardware transmit pointer to
what the software's idea of the first free descriptor is.  Also, we
need to prevent re-waking the transmit queue if we get a 'transmit
done' interrupt at the same time as a 'link down' interrupt, which
this patch does as well.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:50 +02:00
Lennert Buytenhek
8fa89bf5de mv643xx_eth: fix TX hang erratum workaround
The previously merged TX hang erratum workaround ("mv643xx_eth:
work around TX hang hardware issue") assumes that TX_END interrupts
are delivered simultaneously with or after their corresponding TX
interrupts, but this is not always true in practise.

In particular, it appears that TX_END interrupts are issued as soon
as descriptor fetch returns an invalid descriptor, which may happen
before earlier descriptors have been fully transmitted and written
back to memory as being done.

This hardware behavior can lead to a situation where the current
driver code mistakenly assumes that the MAC has given up transmitting
before noticing the packets that it is in fact still currently working
on, causing the driver to re-kick the transmit queue, which will only
cause the MAC to re-fetch the invalid head descriptor, and generate
another TX_END interrupt, et cetera, until the packets in the pipe
finally finish transmitting and have their descriptors written back
to memory, which will then finally break the loop.

Fix this by having the erratum workaround not check the 'number of
unfinished descriptor', but instead, to compare the software's idea
of what the head descriptor pointer should be to the hardware's head
descriptor pointer (which is updated on the same conditions as the
TX_END interupt is generated on, i.e. possibly before all previous
descriptors have been transmitted and written back).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-07-24 06:22:42 +02:00
Linus Torvalds
30d38542ec Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits)
  [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR)
  [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB)
  [ARM] pxa: add base support for PXA930 (aka Tavor-P)
  [ARM] Update mach-types
  [ARM] pxa: make littleton to use the new smc91x platform data
  [ARM] pxa: make zylonite to use the new smc91x platform data
  [ARM] pxa: make mainstone to use the new smc91x platform data
  [ARM] pxa: make lubbock to use new smc91x platform data
  [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data
  [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable
  [NET] smc91x: add SMC91X_NOWAIT flag to platform data
  [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*
  [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata"
  [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper
  Support for LCD on e740 e750 e400 and e800 e-series PDAs
  E-series UDC support
  PXA UDC - allow use of inverted GPIO for pullup
  Add e350 support
  Fix broken e-series build
  E-series GPIO / IRQ definitions.
  ...
2008-07-23 18:24:08 -07:00
Ingo Molnar
e8ebe3b893 e1000e: fix e1000_netpoll(), remove extraneous e1000_clean_tx_irq() call
Evgeniy Polyakov noticed that drivers/net/e1000e/netdev.c:e1000_netpoll()
was calling e1000_clean_tx_irq() without taking the TX lock.

David Miller suggested to remove the call altogether: since in this
callpah there's periodic calls to ->poll() anyway which will do
e1000_clean_tx_irq() and will garbage-collect any finished TX ring
descriptors.

This fix solved the e1000e+netconsole crashes i've been seeing:

=============================================================================
BUG skbuff_head_cache: Poison overwritten
-----------------------------------------------------------------------------

INFO: 0xf658ae9c-0xf658ae9c. First byte 0x6a instead of 0x6b
INFO: Allocated in __alloc_skb+0x2c/0x110 age=0 cpu=0 pid=5098
INFO: Freed in __kfree_skb+0x31/0x80 age=0 cpu=1 pid=4440
INFO: Slab 0xc16cc140 objects=16 used=1 fp=0xf658ae00 flags=0x400000c3
INFO: Object 0xf658ae00 @offset=3584 fp=0xf658af00

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-23 15:30:52 -07:00
Krzysztof Hałasa
867240f7b2 WAN: Use u32 type instead of u_int32_t in LMC driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:05:56 +02:00
Krzysztof Hałasa
64bef7630a WAN: Port LMC driver to generic HDLC
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:05:56 +02:00
Krzysztof Hałasa
52e8a6a2d8 WAN: Convert Zilog-based drivers to generic HDLC
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:05:55 +02:00
Krzysztof Hałasa
aca257530f WAN: Port COSA driver to generic HDLC.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:05:55 +02:00
Krzysztof Hałasa
0bee8db8f6 WAN: farsync driver no longer uses syncppp.c directly
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:38 +02:00
Krzysztof Hałasa
b22267d388 WAN: Convert PC300 driver to use normal u8/u16/u32 types
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:38 +02:00
Krzysztof Hałasa
c36936ce4b WAN: Remove dead code from PC300 driver, part #2
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:38 +02:00
Krzysztof Hałasa
ea966165a3 WAN: Remove dead code from PC300 driver, part #1
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:37 +02:00
Krzysztof Hałasa
c1a0f0cdf9 WAN: Remove unneeded "#include <net/syncppp.h>"
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:37 +02:00
Krzysztof Hałasa
efa415840d Remove bogus variables from syncppp.[ch]
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:31 +02:00
Krzysztof Hałasa
4dfce4075a WAN: cosmetic changes to generic HDLC
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-07-23 23:00:25 +02:00
Roland Dreier
7644264082 mlx4_core: Improve error message when not enough UAR pages are available
If an mlx4 device with default FW (which gives a UAR BAR size of 8 MB)
is used in a system with 64 KB pages, then there are only 8192/64==128
UAR pages available.  However, the first 128 UAR pages are reserved
for use with event queue doorbells, so no UAR pages are available to
do anything else with, which means that the driver cannot work.

The current driver fails with a fairly cryptic "Failed to allocate
driver access region, aborting" message in this situation.  Fix the
driver to detect the problem earlier and print out a clearer
description of the problem and a suggestion of how to fix it (use a
new firmware image).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-23 08:12:47 -07:00
Roland Dreier
95d04f0735 IB/mlx4: Add support for memory management extensions and local DMA L_Key
Add support for the following operations to mlx4 when device firmware
supports them:

 - Send with invalidate and local invalidate send queue work requests;
 - Allocate/free fast register MRs;
 - Allocate/free fast register MR page lists;
 - Fast register MR send queue work requests;
 - Local DMA L_Key.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-23 08:12:26 -07:00
Greg Ungerer
87f4abb45b m68knommu: remove last use of CONFIG_FADS and CONFIG_RPXCLASSIC
They have never been used in this port of the driver. It is has only
ever been used on the ColdFire SoC ethernet core.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23 15:11:29 +10:00
Sebastian Siewior
c1863bed8c m68knommu: remove RPXCLASSIC from the m68k tree
This ifdefs are leftovers from the time as the driver was running
on a ppc.
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23 15:11:29 +10:00
Sebastian Siewior
0d176af5b7 m68knommu: fec: remove FADS
I found config FADS only in ppc/Kconfig. Bye bye relic.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23 15:11:28 +10:00
Stephen Hemminger
8a6d2ea0cd sky2: don't stop queue on shutdown
It is unnecessary, to stop queue and turn off carrier in shutdown
routine. With new netdev_queue this causes warnings.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 21:53:40 -07:00
Linus Torvalds
c010b2f76c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits)
  ipw2200: Call netif_*_queue() interfaces properly.
  netxen: Needs to include linux/vmalloc.h
  [netdrvr] atl1d: fix !CONFIG_PM build
  r6040: rework init_one error handling
  r6040: bump release number to 0.18
  r6040: handle RX fifo full and no descriptor interrupts
  r6040: change the default waiting time
  r6040: use definitions for magic values in descriptor status
  r6040: completely rework the RX path
  r6040: call napi_disable when puting down the interface and set lp->dev accordingly.
  mv643xx_eth: fix NETPOLL build
  r6040: rework the RX buffers allocation routine
  r6040: fix scheduling while atomic in r6040_tx_timeout
  r6040: fix null pointer access and tx timeouts
  r6040: prefix all functions with r6040
  rndis_host: support WM6 devices as modems
  at91_ether: use netstats in net_device structure
  sfc: Create one RX queue and interrupt per CPU package by default
  sfc: Use a separate workqueue for resets
  sfc: I2C adapter initialisation fixes
  ...
2008-07-22 19:09:51 -07:00
David S. Miller
521c4d96e0 ipw2200: Call netif_*_queue() interfaces properly.
netif_carrier_{on,off}() handles starting and stopping packet
flow into the driver.  So there is no reason to invoke netif_stop_queue()
and netif_wake_queue() in response to link status events.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 18:32:47 -07:00
David S. Miller
4255589293 netxen: Needs to include linux/vmalloc.h
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 18:29:10 -07:00
David S. Miller
380bab10de Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2008-07-22 18:19:22 -07:00
Jeff Garzik
d6f8aa8586 [netdrvr] atl1d: fix !CONFIG_PM build
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 21:17:38 -04:00
David S. Miller
7cf75262a4 Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 2008-07-22 17:54:47 -07:00
Florian Fainelli
b0e453902a r6040: rework init_one error handling
This patch reworks the error handling in r6040_init_one
in order not to leak resources and correcly unmap and release
PCI regions of the MAC. Also prefix printk's with the driver name
for clarity.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 20:00:01 -04:00
Florian Fainelli
1de95294f1 r6040: bump release number to 0.18
This patch bumps the release of the r6040 driver. There has been
quite some versions of it out there, but this one is the one
people should report bugs against.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:59:48 -04:00
Florian Fainelli
e24ddf3aa8 r6040: handle RX fifo full and no descriptor interrupts
This patch allows the MAC to handle the RX FIFO full
and no descriptor available interrupts. While we are at it
replace the TX interrupt with its corresponding definition.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:59:46 -04:00
Florian Fainelli
31718dedf6 r6040: change the default waiting time
This patch changes the default waiting time of a packet, which
along with our previous r6040_rx path, was causing huge delays
with another host (160 to 230 ms).

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:59:39 -04:00
Florian Fainelli
32f565df9b r6040: use definitions for magic values in descriptor status
Define all the descriptor status the MAC can set.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:59:35 -04:00
Florian Fainelli
9ca28dc4c7 r6040: completely rework the RX path
This patch completely reworks the RX path in order to be
more accurate about what is going on with the MAC.
We no longer read the error from the MLSR register instead read
the descriptor status register which reflects, the error per descriptor.
We now allocate skbs on the fly in r6040_rx, and we handle allocation
failure instead of simply dropping the packet. Remove the
rx_free_desc counter of r6040_private structure since we
allocate skbs in the RX path.

r6040_rx_buf_alloc is now removed and becomes unuseless.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:59:28 -04:00
Florian Fainelli
129cf9a702 r6040: call napi_disable when puting down the interface and set lp->dev accordingly.
We did not call napi_disabled when putting down the interface
which should be done. Finally initialize lp->dev when everything
is set.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:59:22 -04:00
Lennert Buytenhek
f2ca60f206 mv643xx_eth: fix NETPOLL build
Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de>
noticed that commit 073a345c04
("mv643xx_eth: clarify irq masking and unmasking") broke the
mv643xx_eth build when NETPOLL is enabled, due to it not renaming
one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll().  This patch
takes care of that instance as well.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: Joseph Fannin <jfannin@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:56:37 -04:00
Florian Fainelli
3d4634193a r6040: rework the RX buffers allocation routine
Rework the RX buffers allocation function so that we do not
leak memory in the case we could not allocate skbs for the
RX path. Propagate the errors to the r6040_up function
where we call the RX buffers allocation function.

Also rename the r6040_alloc_txbufs function to
r6040_init_txbufs, to reflect what it really does.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:56:32 -04:00
Florian Fainelli
fec3a23be0 r6040: fix scheduling while atomic in r6040_tx_timeout
Add a helper function which only modifies R6040 MAC registers
use it when we timeout, and on adapter initialization. Fix
the scheduling while atomic but in the timeout routine due
to the reallocation of rx/tx buffers.

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:56:30 -04:00
Florian Fainelli
3d25434816 r6040: fix null pointer access and tx timeouts
This patch fixes a null pointer access in r6040_rx due
to lp->dev not being initialized.

Fix the TX timeouts, TX irq was not re-enabled on RX irq

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:56:29 -04:00
Florian Fainelli
c6e69bb92e r6040: prefix all functions with r6040
Prefix all functions inside the r6040 driver with r6040 to
avoid namespace clashing.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:56:28 -04:00
Thomas Backlund
7e99eeddb3 rndis_host: support WM6 devices as modems
This patch allows Windows Mobile 6 devices to be used for
tethering -- that is, used as modems.  It was requested by
AdamW in kernel bugzilla:

  http://bugzilla.kernel.org/show_bug.cgi?id=11119

and Mandriva kernel-discuss list.  It is tested and confirmed
to work by Peterl:

  http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543

This patch is based on the patch in the above kernel bugzilla,
which is from the usb-rndis-lite tree.

[ dbrownell@users.sourceforge.net: misc fixes ]
Signed-off-by: Thomas Backlund <tmb@mandriva.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:45:49 -04:00
Paulius Zaleckas
7a2f53ee0b at91_ether: use netstats in net_device structure
Use net_device_stats from net_device structure instead of local.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:45:41 -04:00
Ben Hutchings
aa6ef27ea9 sfc: Create one RX queue and interrupt per CPU package by default
Using multiple cores in the same package to handle received traffic
does not appear to provide a performance benefit.  Therefore use CPU
topology information to count CPU packages and use that as the default
number of RX queues and interrupts.  We rely on interrupt balancing to
spread the interrupts across packages.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:44:15 -04:00
Ben Hutchings
8d9853d911 sfc: Use a separate workqueue for resets
This avoids deadlock in case a reset is triggered during self-test.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:44:13 -04:00
Ben Hutchings
9dadae686f sfc: I2C adapter initialisation fixes
As recommended by Jean Delvare:
- Increase timeout to 50 ms
- Leave adapter class clear so that unwanted drivers do not probe our bus
- Use strlcpy() for name initialisation

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:43:29 -04:00
Taku Izumi
81250297d8 e1000: make ioport free
This patch makes e1000 driver ioport-free.
This corrects behavior in probe function so as not to request ioport
resources as long as they are not really needed.  This is based on the
ioport-free patch of e1000 driver from Auke Kok and Tomohiro Kusumi.

Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jeff Kirsher<jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:39:14 -04:00
Francois Romieu
c3570acb53 e1000: delete non NAPI code from the driver
Compile-tested only.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:39:11 -04:00
Jeff Kirsher
63cd31f607 e1000: remove email reference
The email linux-nics@intel.com is no longer available, remove all
references.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:39:08 -04:00
Joe Perches
c7be73bc9b e1000: Move assignments in tests before test
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:39:03 -04:00
Joe Perches
b11840204f e1000: checkpatch clean
Redefine DPRINTK macro using do while(0)
__FUNCTION__ to __func__
structs {} on separate lines
Surround negative constants with ()

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:38:58 -04:00
Joe Perches
e982f17c87 e1000: Remove spaces after casts and function names
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:38:52 -04:00
Joe Perches
c03e83b035 e1000: Move extern function definitions to e1000.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:38:50 -04:00
Joe Perches
1dc329180f e1000: Use hw, er32, and ew32
Use struct e1000_hw *hw = adapter->hw; where necessary
Change macros E1000_READ_REG and E1000_WRITE_REG to er32 and ew32

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:38:47 -04:00
Joe Perches
6479884509 e1000: neaten function declarations
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:34:33 -04:00
Christoph Lameter
cdc18a6709 Fix typo in meth driver
An | in an if statement to check a bit? I think this needs to be a &.
As a result of this typo meth will always operate in promiscuous mode.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 19:34:21 -04:00