Commit graph

46 commits

Author SHA1 Message Date
Dave Airlie
1fbe6f625f Merge tag 'v3.2-rc6' of /home/airlied/devel/kernel/linux-2.6 into drm-core-next
Merge in the upstream tree to bring in the mainline fixes.

Conflicts:
	drivers/gpu/drm/exynos/exynos_drm_fbdev.c
	drivers/gpu/drm/nouveau/nouveau_sgdma.c
2011-12-20 14:43:53 +00:00
Alan Cox
91c7549211 gma500: Now connect up to the DRM build to finish the job
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16 12:14:08 +00:00
Randy Dunlap
44a1dabf4c drm: fix kconfig unmet dependency warning
Fix kconfig unmet dependency warning.  BACKLIGHT_CLASS_DEVICE depends on
BACKLIGHT_LCD_SUPPORT, so select the latter along with the former.

warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11 11:23:09 +00:00
Paul Bolle
87cb73dafe drm: drop select of SLOW_WORK
slow-work got killed in commit 181a51f6e0. This means that since v2.6.36
there is no Kconfig symbol SLOW_WORK. Apparently selecting that symbol
is a nop. Drop that select.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-11 11:06:10 +00:00
Thomas Hellstrom
5a7b74beca vmwgfx: Take the driver out of staging
Also improve a bit on the Kconfig help.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-11 13:06:36 +01:00
Inki Dae
1c248b7d29 DRM: add DRM Driver for Samsung SoC EXYNOS4210.
This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables
only FIMD yet but we will add HDMI support also in the future.

this patch is based on git repository below:
git://people.freedesktop.org/~airlied/linux.git
branch name: drm-next
commit-id: 88ef4e3f4f

you can refer to our working repository below:
http://git.infradead.org/users/kmpark/linux-2.6-samsung
branch name: samsung-drm

We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c
based on Linux framebuffer) but couldn't so because lowlevel codes
of s3c-fb.c are included internally and so FIMD module of this driver has
its own lowlevel codes.

We used GEM framework for buffer management and DMA APIs(dma_alloc_*)
for buffer allocation so we can allocate physically continuous memory
for DMA through it and also we could use CMA later if CMA is applied to
mainline.

Refer to this link for CMA(Continuous Memory Allocator):
http://lkml.org/lkml/2011/7/20/45

this driver supports only physically continuous memory(non-iommu).

Links to previous versions of the patchset:
v1: < https://lwn.net/Articles/454380/ >
v2: < http://www.spinics.net/lists/kernel/msg1224275.html >
v3: < http://www.spinics.net/lists/dri-devel/msg13755.html >
v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 >
v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 >

Changelog v2:
DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command.

    this feature maps user address space to physical memory region
    once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl.

DRM: code clean and add exception codes.

Changelog v3:
DRM: Support multiple irq.

    FIMD and HDMI have their own irq handler but DRM Framework can regiter
    only one irq handler this patch supports mutiple irq for Samsung SoC.

DRM: Consider modularization.

    each DRM, FIMD could be built as a module.

DRM: Have indenpendent crtc object.

    crtc isn't specific to SoC Platform so this patch gets a crtc
    to be used as common object.
    created crtc could be attached to any encoder object.

DRM: code clean and add exception codes.

Changelog v4:
DRM: remove is_defult from samsung_fb.

    is_default isn't used for default framebuffer.

DRM: code refactoring to fimd module.
    this patch is be considered with multiple display objects and
    would use its own request_irq() to register a irq handler instead of
    drm framework's one.

DRM: remove find_samsung_drm_gem_object()

DRM: move kernel private data structures and definitions to driver folder.

    samsung_drm.h would contain only public information for userspace
    ioctl interface.

DRM: code refactoring to gem modules.
    buffer module isn't dependent of gem module anymore.

DRM: fixed security issue.

DRM: remove encoder porinter from specific connector.

    samsung connector doesn't need to have generic encoder.

DRM: code clean and add exception codes.

Changelog v5:
DRM: updated fimd(display controller) driver.
    added various pixel formats, color key and pixel blending features.

DRM: removed end_buf_off from samsung_drm_overlay structure.
    this variable isn't used and end buffer address would be
    calculated by each sub driver.

DRM: use generic function for mmap_offset.
    replaced samsung_drm_gem_create_mmap_offset() and
    samsung_drm_free_mmap_offset() with generic ones applied
    to mainline recentrly.

DRM: removed unnecessary codes and added exception codes.

DRM: added comments and code clean.

Changelog v6:
DRM: added default config options.

DRM: added padding for 64-bit align.

DRM: changed prefix 'samsung' to 'exynos'

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-05 10:27:31 +01:00
Dave Airlie
bf5192edcb drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLE
Multi-gpu/switcheroo relies on this option to get the console on the
correct GPU at bootup, some distros enable it but it seems some get
it wrong.

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-27 16:54:06 +10:00
Konstantin Khlebnikov
cbf15bdbbd i915: select VIDEO_OUTPUT_CONTROL for ACPI_VIDEO
fix Kconfig warning:

(DRM_I915 && STUB_POULSBO) selects ACPI_VIDEO which has unmet direct dependencies
(ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT)

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13 09:10:25 +10:00
Arnd Bergmann
1f692a14cb drm/i810: remove the BKL
SMP i810 systems were practically nonexistent and the configuration
was not officially supported by Intel at the time when Pentium-III
was common.

With this change, it is still possible to build a distribution kernel
that has support for SMP and includes the i810 driver without the BKL.
As a precaution, check for the theoretical SMP case at run time and
refuse to load the driver.

We also need to disable CONFIG_PREEMPT builds for this driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 12:15:04 +10:00
Arnd Bergmann
7f50684717 drm: remove i830 driver
This driver is one of the last users of the big kernel
lock, which is going away. All the hardware supported
by this driver also works with the newer i915 driver,
and recent X.org releases only work with that driver
anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 12:14:18 +10:00
Chris Wilson
8a327f23e2 Merge remote branch 'linus/master' into drm-intel-fixes
Merge with Linus to resolve conflicting fixes for the reusing the stale
HEAD value during intel_ring_wait().

Conflicts:
	drivers/gpu/drm/i915/intel_ringbuffer.c
2011-01-24 18:27:32 +00:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Chris Wilson
f7ab9b407b drm/i915: Add dependency on CONFIG_TMPFS
Without tmpfs, shmem_readpage() is not compiled in causing an OOPS as
soon as we try to allocate some swappable pages for GEM.

Jan 19 22:52:26 harlie kernel: Modules linked in: i915(+) drm_kms_helper cfbcopyarea video backlight cfbimgblt cfbfillrect
Jan 19 22:52:26 harlie kernel:
Jan 19 22:52:26 harlie kernel: Pid: 1125, comm: modprobe Not tainted 2.6.37Harlie #10 To be filled by O.E.M./To be filled by O.E.M.
Jan 19 22:52:26 harlie kernel: EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 3
Jan 19 22:52:26 harlie kernel: EIP is at 0x0
Jan 19 22:52:26 harlie kernel: EAX: 00000000 EBX: f7b7d000 ECX: f3383100 EDX: f7b7d000
Jan 19 22:52:26 harlie kernel: ESI: f1456118 EDI: 00000000 EBP: f2303c98 ESP: f2303c7c
Jan 19 22:52:26 harlie kernel:  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Jan 19 22:52:26 harlie kernel: Process modprobe (pid: 1125, ti=f2302000 task=f259cd80 task.ti=f2302000)
Jan 19 22:52:26 harlie kernel: Stack:
Jan 19 22:52:26 harlie udevd-work[1072]: '/sbin/modprobe -b pci:v00008086d00000046sv00000000sd00000000bc03sc00i00' unexpected exit with status 0x0009
Jan 19 22:52:26 harlie kernel:  c1074061 000000d0 f2f42b80 00000000 000a13d2 f2d5dcc0 00000001 f2303cac
Jan 19 22:52:26 harlie kernel:  c107416f 00000000 000a13d2 00000000 f2303cd4 f8d620ed f2cee620 00001000
Jan 19 22:52:26 harlie kernel:  00000000 000a13d2 f1456118 f2d5dcc0 f1a40000 00001000 f2303d04 f8d637ab
Jan 19 22:52:26 harlie kernel: Call Trace:
Jan 19 22:52:26 harlie kernel:  [<c1074061>] ? do_read_cache_page+0x71/0x160
Jan 19 22:52:26 harlie kernel:  [<c107416f>] ? read_cache_page_gfp+0x1f/0x30
Jan 19 22:52:26 harlie kernel:  [<f8d620ed>] ? i915_gem_object_get_pages+0xad/0x1d0 [i915]
Jan 19 22:52:26 harlie kernel:  [<f8d637ab>] ? i915_gem_object_bind_to_gtt+0xeb/0x2d0 [i915]
Jan 19 22:52:26 harlie kernel:  [<f8d65961>] ? i915_gem_object_pin+0x151/0x190 [i915]
Jan 19 22:52:26 harlie kernel:  [<c11e16ed>] ? drm_gem_object_init+0x3d/0x60
Jan 19 22:52:26 harlie kernel:  [<f8d65aa5>] ? i915_gem_init_ringbuffer+0x105/0x1e0 [i915]
Jan 19 22:52:26 harlie kernel:  [<f8d571b7>] ? i915_driver_load+0x667/0x1160 [i915]

Reported-by: John J. Stimson-III <john@idsfa.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2011-01-20 11:21:04 +00:00
Zhang Rui
677bd810ee ACPI video: remove output switching control
Remove the ACPI video output switching control as it never works.

With the patch applied,
ACPI video driver still catches the video output notification,
but it does nothing but raises the notification to userspace.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-14 00:04:52 -05:00
Arnd Bergmann
6de5bd128d BKL: introduce CONFIG_BKL.
With all the patches we have queued in the BKL removal tree, only a
few dozen modules are left that actually rely on the BKL, and even
there are lots of low-hanging fruit. We need to decide what to do
about them, this patch illustrates one of the options:

Every user of the BKL is marked as 'depends on BKL' in Kconfig,
and the CONFIG_BKL becomes a user-visible option. If it gets
disabled, no BKL using module can be built any more and the BKL
code itself is compiled out.

The one exception is file locking, which is practically always
enabled and does a 'select BKL' instead. This effectively forces
CONFIG_BKL to be enabled until we have solved the fs/lockd
mess and can apply the patch that removes the BKL from fs/locks.c.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-10-21 15:44:13 +02:00
Alex Deucher
21a8122ad3 drm/radeon/kms: add support for internal thermal sensors (v3)
rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-02 10:00:00 +10:00
Dave Airlie
f5f05c8a57 drm: add PCI requirements to low-level drivers.
Now that highlevel DRM no longer requires PCI, we can move the requirement
into the lowlevel drivers.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-09 07:43:27 +10:00
Jordan Crouse
dcdb167402 drm: Add support for platform devices to register as DRM devices
Allow platform devices without PCI resources to be DRM devices.

[airlied: fixup warnings with dev pointers]

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-01 10:07:39 +10:00
Dave Airlie
5d9b7e2d2d drm/radeon: fix power supply kconfig interaction.
radeon needs power supply to get correct PM info so select it at the radeon
level not at the kms option.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-21 15:41:20 +10:00
Dave Airlie
eb1f8e4f3b drm/fbdev: rework output polling to be back in the core. (v4)
After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.

v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.

v3: add config lock take inside polling, add intel/nouveau poll init/fini calls

v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.

glisse: discard drm_helper_hpd_irq_event

v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:11 +10:00
Dave Airlie
5c4426a782 drm/kms/fb: add polling support for when nothing is connected.
When we are running in a headless environment we have no idea what
output the user might plug in later, we only have hotplug detect
from the digital outputs. So if we detect no connected outputs at
initialisation, start a slow work operation to poll every 5 seconds
for an output.

this is only hooked up for radeon so far, on hw where we have full
hotplug detection there is no need for this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:29:52 +10:00
Dave Airlie
f71d018798 drm/radeon/kms: move radeon KMS on/off switch out of staging.
We are happy enough that the KMS driver is stable enough for enough people
for the kms enable/disable to leave staging. Distros can now contemplate
turning this on.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:35:47 +10:00
Chris Wilson
ca9ab10033 drm/i915: Select CONFIG_SHMEM
The driver requires shmfs as the backing filesystem to handle the buffer
objects, so ensure it is selected if the user chooses to build our
driver.

Fixes: Bug 14662 - Dell E5500 kernel panic with KMS
http://bugzilla.kernel.org/show_bug.cgi?id=14662

The revealing nature of the panic is the NULL function pointer
dereference in read_cache_page_async().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: stable@kernel.org
2009-11-25 12:27:42 -08:00
Jesse Barnes
c1c7af6089 drm/i915: force mode set at lid open time
Some laptop platforms will disable pipes and/or planes at lid close time
and not restore them when the lid is opened again.  So catch the lid
event, and if the lid was opened, force a mode restore.

Fixes fdo bug #21230.

Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-10 16:10:00 -07:00
Dave Airlie
a0cdc6495b drm/kms/radeon: make kms default a runtime option
This makes the kms/enable disable a runtime not a build time
option.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 11:15:59 +10:00
Dave Airlie
6fcefd56f5 drm/kms: fix kms helper license + Kconfig
Allow the KMS module to work properly, and also rename
it to KMS_HELPER so its clearer what its for.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 11:15:58 +10:00
Dave Airlie
13a8195b14 drm: split crtc/fb helpers into a separate module
I really don't want to have core drm module rely on CONFIG_FB,
so this is the easiest answer.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 15:45:33 +10:00
Ben Hutchings
70967ab9c0 radeon: Use request_firmware()
Loosely based on a patch by
Jaswinder Singh Rajput <jaswinderlinux@gmail.com>.

KMS support by Dave Airlie <airlied@redhat.com>.

For Radeon 100- to 500-series, firmware blobs look like:
    struct {
        __be32 datah;
        __be32 datal;
    } cp_ucode[256];

For Radeon 600-series, there are two separate firmware blobs:
    __be32 me_ucode[PM4_UCODE_SIZE * 3];
    __be32 pfp_ucode[PFP_UCODE_SIZE];

For Radeon 700-series, likewise:
    __be32 me_ucode[R700_PM4_UCODE_SIZE];
    __be32 pfp_ucode[R700_PFP_UCODE_SIZE];

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31 09:09:30 +10:00
Ben Hutchings
52f97df5da drm/r128: Use request_firmware() to load CCE microcode
Firmware blob looks like this:
    __be32 datah
    __be32 datal

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27 10:47:00 +10:00
Ben Hutchings
ece2be7993 drm/mga: Use request_firmware() to load microcode
Image format is IHEX, one record for each pipe in order (record
addresses are ignored).

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27 10:46:54 +10:00
Eric Anholt
8c52da503b drm/i915: Add missing dependency on Intel AGP support.
Users could accidentally enable AGP but not the Intel AGP support, and get
a DRM that doesn't probe as a result.

Bug #22358.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-21 22:13:38 -07:00
Jerome Glisse
771fe6b912 drm/radeon: introduce kernel modesetting for radeon hardware
Add kernel modesetting support to radeon driver, use the ttm memory
manager to manage memory and DRM/GEM to provide userspace API.
In order to avoid backward compatibility issue and to allow clean
design and code the radeon kernel modesetting use different code path
than old radeon/drm driver.

When kernel modesetting is enabled the IOCTL of radeon/drm
driver are considered as invalid and an error message is printed
in the log and they return failure.

KMS enabled userspace will use new API to talk with the radeon/drm
driver. The new API provide functions to create/destroy/share/mmap
buffer object which are then managed by the kernel memory manager
(here TTM). In order to submit command to the GPU the userspace
provide a buffer holding the command stream, along this buffer
userspace have to provide a list of buffer object used by the
command stream. The kernel radeon driver will then place buffer
in GPU accessible memory and will update command stream to reflect
the position of the different buffers.

The kernel will also perform security check on command stream
provided by the user, we want to catch and forbid any illegal use
of the GPU such as DMA into random system memory or into memory
not owned by the process supplying the command stream. This part
of the code is still incomplete and this why we propose that patch
as a staging driver addition, future security might forbid current
experimental userspace to run.

This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
(radeon up to X1950). Works is underway to provide support for R6XX,
R7XX and newer hardware (radeon from HD2XXX to HD4XXX).

Authors:
    Jerome Glisse <jglisse@redhat.com>
    Dave Airlie <airlied@redhat.com>
    Alex Deucher <alexdeucher@gmail.com>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 12:01:53 +10:00
Thomas Hellstrom
ba4e7d973d drm: Add the TTM GPU memory manager subsystem.
TTM is a GPU memory manager subsystem designed for use with GPU
devices with various memory types (On-card VRAM, AGP,
PCI apertures etc.). It's essentially a helper library that assists
the DRM driver in creating and managing persistent buffer objects.

TTM manages placement of data and CPU map setup and teardown on
data movement. It can also optionally manage synchronization of
data on a per-buffer-object level.

TTM takes care to provide an always valid virtual user-space address
to a buffer object which makes user-space sub-allocation of
big buffer objects feasible.

TTM uses a fine-grained per buffer-object locking scheme, taking
care to release all relevant locks when waiting for the GPU.
Although this implies some locking overhead, it's probably a big
win for devices with multiple command submission mechanisms, since
the lock contention will be minimal.

TTM can be used with whatever user-space interface the driver
chooses, including GEM. It's used by the upcoming Radeon KMS DRM driver
and is also the GPU memory management core of various new experimental
DRM drivers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 09:37:57 +10:00
Len Brown
31db5645bd ACPI, i915: build fix (v2)
drivers/built-in.o: In function `intel_opregion_init':
(.text+0x9d540): undefined reference to `acpi_video_register'

v2: move under DRM_I915 from DRM_I915_KMS

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2009-05-29 21:26:38 -04:00
Len Brown
4e3507f718 Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release 2009-05-16 01:55:59 -04:00
Len Brown
ecb4aed78d ACPI, i915: build fix
drivers/built-in.o: In function `intel_opregion_init':
(.text+0x9d540): undefined reference to `acpi_video_register'

http://bugzilla.kernel.org/show_bug.cgi?id=13165

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 22:52:21 -04:00
Jesse Barnes
f29ce72795 drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED
People keep getting bitten by this, so just auto-select it by default,
assuming most configurations will actually want a console.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-12 09:08:31 -07:00
Krzysztof Helt
a1a5c3b923 fbdev/drm: fix Kconfig submenu mess in "Graphics support"
Submenus of the graphics support "Support for frame buffer devices" and
"Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" are
broken in half after latest changes for Intel 915 mode setting support.

The DRM subsection is broken because one option is put outside the choice
section it depends on.

The frame buffers part is broken then due to circular dependency.  Fix
this by make Intel frame buffers depend on CONFIG_INTEL_AGP.

Kconfigs are broken by d2f5935770
("drm/i915: select framebuffer support automatically").

This is probably not only way to fix this.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18 15:37:56 -08:00
Ingo Molnar
d2f5935770 drm/i915: select framebuffer support automatically
Migration helper.

The i915 driver recently added a 'depends on FB' rule to its
Kconfig entry - which silently turns off DRM_I915 if someone
has a working config but no CONFIG_FB selected, and upgrades
to the latest upstream kernel.

Norbert Preining reported this problem:

   Bug-Entry   : http://bugzilla.kernel.org/show_bug.cgi?id=12599
   Subject     : dri /dev node disappeared with 2.6.29-rc1

So change it to "select FB", which auto-selects framebuffer
support. This way the driver keeps working, regardless of
whether FB was enabled before or not.

Kconfig select's of interactive options can be problematic to
dependencies and can cause build breakages - but in this case
it's safe because it's a leaf entry with no dependencies of its
own.

( There is some minor circular dependency fallout as FB_I810
  and FB_INTEL also used 'depends on FB' constructs - update
  those to "select FB" too. )

Reported-by: Norbert Preining <preining@logic.at>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-08 21:53:05 +10:00
Dave Airlie
57a6297e52 drm: kconfig have drm core select i2c for kms
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:24 +10:00
Eric Anholt
06d9f33ceb drm/i915: Register module dependencies for the modesetting code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Jesse Barnes
79e539453b DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Hugh Dickins
e798ba57e9 Export tiny shmem_file_setup for DRM-GEM
We're trying to keep the !CONFIG_SHMEM tiny-shmem.c (using ramfs without
swap) in synch with CONFIG_SHMEM shmem.c (and mpm is preparing patches
to combine them).  I was glad to see EXPORT_SYMBOL_GPL(shmem_file_setup)
go into shmem.c, but why not support DRM-GEM when !CONFIG_SHMEM too?
But caution says still depend on MMU, since !CONFIG_MMU is.. different.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 16:17:42 -07:00
Dave Airlie
9e0b97e37f drm: make CONFIG_DRM depend on CONFIG_SHMEM.
This can be removed later when DRM doesn't depend on shmem.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Adrian Bunk
dfcf96d09c FB_SIS=m, DRM_SIS=y is not a legal configuration.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:11 +10:00
Dave Airlie
c0e09200dc drm: reorganise drm tree to be more future proof.
With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-14 10:45:01 +10:00
Renamed from drivers/char/drm/Kconfig (Browse further)