Commit graph

139 commits

Author SHA1 Message Date
Mike Frysinger
caf0ea8582 Blackfin: drop unused ax88180 resources
The ax88180 driver was never merged, so drop the corresponding resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:43 -05:00
Yi Li
578d36f5e1 Blackfin: SMP: don't start up core b until its state has been completely onlined
When testing PREEMPT_RT kernel on BF561-EZKit, the kernel blocks while
booting.  When the kernel initializes the ethernet driver, it sleeps and
never wakes up.

The issue happens when the kernel waits for a timer for Core B to timeout
(the timers are per-cpu based: static DEFINE_PER_CPU(struct tvec_base *,
tvec_bases) = &boot_tvec_bases).

However, the ksoftirqd thread for Core B (note, the ksoftirqd thread is
also per-cpu based) cannot work properly, and the timers for Core B never
times out.

When ksoftirqd() for the first time runs on core B, it is possible core A
is still initializing core B (see smp_init() -> cpu_up() -> __cpu_up()).
So the "cpu_is_offline()" check may return true and ksoftirqd moves to
"wait_to_die".

So delay the core b start up until the per-cpu timers have been set up
fully.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:09 -05:00
Valentin Yakovenkov
ab843c7940 Blackfin: add support for the Acvilon BF561 board
Signed-off-by: Valentin Yakovenkov <yakovenkov@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:15:10 -05:00
Mike Frysinger
00d2460454 Blackfin: unify DMA masks
Every Blackfin variant has the same DMA bit masks, so avoid duplicating
them over and over in each mach header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:59 -05:00
Michael Hennerich
c6feb76828 Blackfin: fix typo in isp1760 platform name
The driver changed from "isp1760-hcd" to "isp1760", so update resources
to match.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:55 -05:00
Mike Frysinger
a8e8e49168 Blackfin: unify duplicated power masks
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:53 -05:00
Mike Frysinger
17a1b5e374 Blackfin: coreb: switched to unlocked_ioctl
We don't need the BKL and now people will stop looking at this.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:21 -05:00
Mike Frysinger
f99e8c1d0f Blackfin: work around testset anomaly 05000477
Ironically, the atomic testset instruction cannot be interrupted else it
will produce incorrect results.  So disable interrupts to help it out.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:39 -05:00
Mike Frysinger
af5d7fc7e4 Blackfin: update anomaly lists
Add some recently documented anomalies (473, 474, 475, 477).  Also stick
a "do not edit" notice in here so people know these are copies of some
master version.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-11-25 02:35:37 -05:00
Mike Frysinger
282246dae8 Blackfin: drop all simple-gpio board resources
The simple-gpio has been replaced by the gpio sysfs interface, so drop the
unused simple-gpio resources from all Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-08 00:58:18 -04:00
Robin Getz
96f1050d3d Blackfin: mass clean up of copyright/licensing info
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.

It also removes:
 - verbose GPL text(refer to the top level ./COPYING file)
 - file names (you are looking at the file)
 - bug url (it's in the ./MAINTAINERS file)
 - "or later" on GPL-2, when we did not have that right

It also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:26 -04:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Harald Krapfenbauer
9c21453e37 Blackfin: update cm board resources
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:46 -04:00
Barry Song
dac981740f Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name
The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:27 -04:00
Mike Frysinger
0198b3bcae Blackfin: drop board resources for dead devices (pbx/ad9960)
These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:24 -04:00
Yi Li
eb7bd9c461 Blackfin: cleanup sync handling when enabling/disabling cplbs
The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper
sync procedures as laid out in the Blackfin programming manual.  So rather
than audit/fix every call location, create helper functions that do the
right things in order to safely update these MMRs.  Then convert all call
sites to use these new helper functions.

While we're fixing the code, drop the workaround for anomaly 05000125 as
that anomaly applies to old versions of silicon that we do not support.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:19 -04:00
Yi Li
bd411b15cc Blackfin: update anomaly lists
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 22:10:16 -04:00
Michael Hennerich
61f09b5a09 Blackfin: convert boards to use platform data with smc91x
Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:32:00 -04:00
Graf Yang
01b9f4b0ed Blackfin: improve double fault debug handling
Since the hardware only provides reporting for the last exception handled,
and the values are valid only when executing the exception handler, we
need to save the context for reporting at a later point.  While we do this
for one exception, it doesn't work properly when handling a second one as
the original exception is clobbered by the double fault.  So when double
fault debugging is enabled, create a dedicated shadow of these values and
save/restore out of there.  Now the crash report properly displays the
first exception as well as the second one.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:57 -04:00
Sonic Zhang
f1c717fbf8 Blackfin: fix wrong CTS inversion
The Blackfin serial headers were inverting the CTS value leading to wrong
handling of the CTS line which broke CTS/RTS handling completely.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:30 -04:00
Mike Frysinger
fb4b5d3a37 Blackfin: handle BF561 Core B memory regions better when SMP=n
Rather than assume Core B is always run with caches turned on, let people
load into any of the on-chip memory regions.  It is their business how the
SRAM/Cache regions are utilized, so don't prevent them from being able to
load into them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:24 -04:00
Graf Yang
976119bc5d Blackfin: update anomaly lists to match latest sheets/usage
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-16 01:52:17 -04:00
Mike Frysinger
3a7f5b1605 Blackfin: drop unused ISP1760 port1_disable from board resources
The port1 disable stuff was dropped from the USB ISP1760, so update the
Blackfin boards accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:13 -04:00
Mike Frysinger
fa48f84a8c Blackfin: unify memory map headers
Many aspects of the Blackfin memory map is exactly the same across all
variants.  Rather than copy and paste all of these duplicated values in
each header, unify all of these into the common Blackfin memory map header
file.  In the process, push down BF561 SMP specific stuff to the BF561
specific header to keep the noise down.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:16:07 -04:00
Mike Frysinger
a200ad22bb Blackfin: update anomaly lists
Update anomaly headers to match latest released anomaly sheets.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 21:15:38 -04:00
Yi Li
53122693c3 Blackfin: define SPI IRQ in board resources
The Blackfin SPI driver can be driven by an IRQ now, so declare it in
the board resources.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13 07:20:10 -04:00
Mike Frysinger
a261eec000 Blackfin: rename some Blackfin drivers
Try to keep the naming conventions consistent, so:
	SPI_ADC_BF533 -> BFIN_SPI_ADC
	TWI_LCD       -> BFIN_TWI_LCD

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:41 -04:00
Graf Yang
1fa9be72b5 Blackfin: add support for gptimer0 as a tick source
For systems where the core cycles are not a usable tick source (like SMP
or cycles gets updated), enable gptimer0 as an alternative.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:37 -04:00
Mike Frysinger
d8804adf52 Blackfin: do not append newlines to panic() messages
The panic() function already handles newlines for us.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:34 -04:00
Graf Yang
f5879fda09 Blackfin: add MDMA defines to make cross-variant coding easier
Add some defines to make the BF538/BF561 look like most other Blackfin
parts in that it has a MDMA0 channel available for low level init.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:26 -04:00
Mike Frysinger
c8f36dc3c1 Blackfin: simplify BF561 coreb driver greatly
Since 90% of this driver can be handled in user space, move it to the
corebld user space application.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:24 -04:00
Mike Frysinger
a413647bb5 Blackfin: pull updated anomaly lists from toolchain
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12 06:03:47 -04:00
Sonic Zhang
d307d36ade tty: Blackin CTS/RTS
Both software emulated and hardware based CTS and RTS are enabled in
serial driver.

The CTS RTS PIN connection on BF548 UART port is defined as a modem
device not as a host device.  In order to test it under Linux, please
nake a cross UART cable to exchange CTS and RTS signal.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:44:05 -07:00
Sonic Zhang
6f95570e40 Change hardware flow control from poll to interrupt driven
Only the CTS bit is affected.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:44:05 -07:00
Michael Hennerich
f3f704d375 Blackfin arch: SPI_MMC is now mainlined MMC_SPI
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06 00:27:57 +08:00
Mike Frysinger
7dbc3f6ead Blackfin arch: add stubs for anomalies 447 and 448
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06 00:20:49 +08:00
Mike Frysinger
c18e99cfba Blackfin arch: update anomaly sheets to match latest public info
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04 17:36:49 +08:00
Tom Parker
97d4b35fb4 Blackfin arch: fix bug - Error if one serial has hardware flow control and the other doesn't
I have a system where UART0 is configured with hardware flow control, but UART1
doesn't have it enabled. Attempting to access UART1 in this configuration
results in the following error in dmesg:

<3>bfin-gpio: GPIO 0 is already reserved as Peripheral by bfin-uart !
<5>Stack from 0082bc7c:
<5>        0082bc88 00404dd6 00000003 00000000 0054051e 004079da 0082bcb4
00000000
<5>        00000003 00000000 0052686c 0113f2a0 005fa3f0 00000032 20515249
00003035
<5>        00427228 00526e50 0113f2e0 005fa3f0 00000032 0113f2e0 0054b748
0000ffff
<5>        22222222 22222222 004e1628 00427304 00000000 00000032 00000023
0054b748
<5>        00487a94 0054b7e8 0054b748 0000000b 00487fb8 0054b748 0054b748
00000001
<5>        0000000a 005fa3f0 009d4fe8 0101e3c0 0054b748 005fa3f0 0050b134
0054b748
<5>
<5>Call Trace:
<4>[<00485c16>] _uart_startup+0x56/0x178
<4>[<004865c8>] _uart_open+0x40/0x3e0
<4>[<0048661c>] _uart_open+0x94/0x3e0
<4>[<0047f1ce>] _init_dev+0x1fa/0x450
<4>[<004e1628>] ___mutex_unlock_slowpath+0x30/0xe8
<4>[<004815da>] _tty_open+0xf6/0x21c
<4>[<0043dab0>] ___path_lookup_intent_open+0x34/0x7c
<4>[<004375e4>] _chrdev_open+0x7c/0x134
<4>[<0043dc2c>] _open_namei+0x60/0x568
<4>[<00433fa2>] ___dentry_open+0x9e/0x188
<4>[<00437568>] _chrdev_open+0x0/0x134
<4>[<0043410c>] _nameidata_to_filp+0x30/0x3c
<4>[<00434152>] _do_filp_open+0x3a/0x44
<4>[<00408826>] _task_running_tick+0x102/0x278
<4>[<0043418e>] _do_sys_open+0x32/0xac
<4>[<0043ede4>] _sys_ioctl+0x28/0x50
<4>[<0043edbc>] _sys_ioctl+0x0/0x50
<4>[<00434224>] _sys_open+0x18/0x20
<4>[<0043420c>] _sys_open+0x0/0x20
<4>[<00418174>] _sys_setuid+0x0/0xc8

This is because the #ifdef's in bfin_serial_5xx.h are messed up. More
specifically, they add/remove the uart_{rts,cts}_pin fields in
bfin_serial_resources based on whether the particular port has rts/cts enabled,
as opposed to when either port has it enabled.

This patch fixed this.

Signed-off-by: Tom Parker <blackfin@tevp.net>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03 17:59:39 +08:00
Mike Frysinger
ee554be9dd Blackfin arch: fix compile failure when missing the anomaly definition
make sure ANOMALY_05000278/ANOMALY_05000380 is defined for all parts

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-03 16:52:55 +08:00
Mike Frysinger
a572e217c6 Blackfin arch: drop untested and useless "generic" board file
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-02 17:22:36 +08:00
Michael Hennerich
772c258fd0 Blackfin arch: Add BF561 PPI POLS, POLC Masks
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Sonic Zhang
b52dae3139 Blackfin arch: Fix bug - Run "reboot" hangs bf518-ezbrd
[Mike Frysinger <vapier.adi@gmail.com>:
 - setup P_DEFAULT_BOOT_SPI_CS  for every arch based on
   the default bootrom behavior and convert all our boards
   to it
 - revert previous anomaly change ... bf51x is not affected
   by anomaly 05000353]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Yi Li
6a01f23033 Blackfin arch: merge adeos blackfin part to arch/blackfin/
[Mike Frysinger <vapier.adi@gmail.com>:
 - handle bf531/bf532/bf534/bf536 variants in ipipe.h
 - cleanup IPIPE logic for bfin_set_irq_handler()
 - cleanup ipipe asm code a bit and add missing ENDPROC()
 - simplify IPIPE code in trap_c
 - unify some of the IPIPE code and fix style
 - simplify DO_IRQ_L1 handling with ipipe code
 - revert IRQ_SW_INT# addition from ipipe merge
 - remove duplicate get_{c,s}clk() prototypes
]

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger
6651ece9e2 Blackfin arch: update anomaly headers to match latest sheets
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Graf Yang
3d7c603ed4 Blackfin arch: Remove wasted SIR header files
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang
42bd8bcb2f Blackfin arch: Modify bfin_sir device configuration to board file
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger
c9e0020d49 Blackfin arch: push bf561 PERIPHERAL_MAP oddity into bf561-specific code
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger
b03f203986 Blackfin arch: cleanup - use scm for changelog, not file headers
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:38 +08:00
Mike Frysinger
211daf9d72 Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match everyone else
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang
dbc895f955 Blackfin arch: smp patch cleanup from LKML review
1. Use inline get_l1_... functions instead of macro
2. Fix compile issue about smp barrier functions

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00